The state of the interrupts (irqflags) and the preemption counter are
both passed down to tracing_generic_entry_update(). Only one bit of
irqflags is actually required: The on/off state. The complete 32bit
of the preemption counter isn't needed. Just whether of the upper bits
(softirq, hardirq and NMI) are set and the preemption depth is needed.
The irqflags and the preemption counter could be evaluated early and the
information stored in an integer `trace_ctx'.
tracing_generic_entry_update() would use the upper bits as the
TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth
(considering that one must be substracted from the counter in one
special cases).
The actual preemption value is not used except for the tracing record.
The `irqflags' variable is mostly used only for the tracing record. An
exception here is for instance wakeup_tracer_call() or
probe_wakeup_sched_switch() which explicilty disable interrupts and use
that `irqflags' to save (and restore) the IRQ state and to record the
state.
Struct trace_event_buffer has also the `pc' and flags' members which can
be replaced with `trace_ctx' since their actual value is not used
outside of trace recording.
This will reduce tracing_generic_entry_update() to simply assign values
to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved
to _tracing_gen_ctx_flags() which replaces preempt_count() and
local_save_flags() invocations.
As an example, ftrace_syscall_enter() may invoke:
- trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update()
- event_trigger_unlock_commit()
-> ftrace_trace_stack() -> … -> tracing_generic_entry_update()
-> ftrace_trace_userstack() -> … -> tracing_generic_entry_update()
In this case the TRACE_FLAG_* bits were evaluated three times. By using
the `trace_ctx' they are evaluated once and assigned three times.
A build with all tracers enabled on x86-64 with and without the patch:
text data bss dec hex filename
21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old
21970293 17084168 7639260 46693721 2c87d59 vmlinux.new
text shrank by 379 bytes, data remained constant.
Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, if a callback is registered to a ftrace function and its
ftrace_ops does not have the RECURSION flag set, it is encapsulated in a
helper function that does the recursion for it.
Really, all the callbacks should have their own recursion protection for
performance reasons. But they should not all implement their own. Move the
recursion helpers to global headers, so that all callbacks can use them.
Link: https://lkml.kernel.org/r/20201028115612.460535535@goodmis.org
Link: https://lkml.kernel.org/r/20201106023546.166456258@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When an interrupt or NMI comes in and switches the context, there's a delay
from when the preempt_count() shows the update. As the preempt_count() is
used to detect recursion having each context have its own bit get set when
tracing starts, and if that bit is already set, it is considered a recursion
and the function exits. But if this happens in that section where context
has changed but preempt_count() has not been updated, this will be
incorrectly flagged as a recursion.
To handle this case, create another bit call TRANSITION and test it if the
current context bit is already set. Flag the call as a recursion if the
TRANSITION bit is already set, and if not, set it and continue. The
TRANSITION bit will be cleared normally on the return of the function that
set it, or if the current context bit is clear, set it and clear the
TRANSITION bit to allow for another transition between the current context
and an even higher one.
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The code that checks recursion will work to only do the recursion check once
if there's nested checks. The top one will do the check, the other nested
checks will see recursion was already checked and return zero for its "bit".
On the return side, nothing will be done if the "bit" is zero.
The problem is that zero is returned for the "good" bit when in NMI context.
This will set the bit for NMIs making it look like *all* NMI tracing is
recursing, and prevent tracing of anything in NMI context!
The simple fix is to return "bit + 1" and subtract that bit on the end to
get the real bit.
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
is_good_name() is useful for other trace infrastructure, such as
synthetic events, so make it available via trace.h.
Link: https://lkml.kernel.org/r/cc6d6a2d7da6957fcbe1e2922e76d18d2bb459b4.1602598160.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Initialize per-instance event list in early boot time (before
initializing instance directory on tracefs). This fixes boot-time
tracing to correctly handle the boot-time per-instance settings.
Link: https://lkml.kernel.org/r/160096560826.182763.17110991546046128881.stgit@devnote2
Fixes: 4114fbfd02 ("tracing: Enable creating new instance early boot")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Enable creating new trace_array instance in early boot stage.
If the instances directory is not created, postpone it until
the tracefs is initialized.
Link: https://lkml.kernel.org/r/159974154763.478751.6289753509587233103.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Current tracing_init_dentry() return a d_entry pointer, while is not
necessary. This function returns NULL on success or error on failure,
which means there is no valid d_entry pointer return.
Let's return 0 on success and negative value for error.
Link: https://lkml.kernel.org/r/20200712011036.70948-5-richard.weiyang@linux.alibaba.com
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
I was attempting to use pid filtering with function_graph, but it wasn't
allowing anything to make it through. Turns out ftrace_trace_task
returns false if ftrace_ignore_pid is not-empty, which isn't correct
anymore. We're now setting it to FTRACE_PID_IGNORE if we need to ignore
that pid, otherwise it's set to the pid (which is weird considering the
name) or to FTRACE_PID_TRACE. Fix the check to check for !=
FTRACE_PID_IGNORE. With this we can now use function_graph with pid
filtering.
Link: https://lkml.kernel.org/r/20200725005048.1790-1-josef@toxicpanda.com
Fixes: 717e3f5ebc ("ftrace: Make function trace pid filtering a bit more exact")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a process has the trace_pipe open on a trace_array, the current tracer
for that trace array should not be changed. This was original enforced by a
global lock, but when instances were introduced, it was moved to the
current_trace. But this structure is shared by all instances, and a
trace_pipe is for a single instance. There's no reason that a process that
has trace_pipe open on one instance should prevent another instance from
changing its current tracer. Move the reference counter to the trace_array
instead.
This is marked as "Fixes" but is more of a clean up than a true fix.
Backport if you want, but its not critical.
Fixes: cf6ab6d914 ("tracing: Add ref count to tracer for when they are being read by pipe")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When using trace-cmd on 5.6-rt for the function graph tracer, the output was
corrupted. It gave output like this:
funcgraph_entry: func=0xffffffff depth=38982
funcgraph_entry: func=0x1ffffffff depth=16044
funcgraph_exit: func=0xffffffff overrun=0x92539aaf00000000 calltime=0x92539c9900000072 rettime=0x100000072 depth=11084
funcgraph_exit: func=0xffffffff overrun=0x9253946e00000000 calltime=0x92539e2100000072 rettime=0x72 depth=26033702
funcgraph_entry: func=0xffffffff depth=85798
funcgraph_entry: func=0x1ffffffff depth=12044
The reason was because the tracefs/events/ftrace/funcgraph_entry/exit format
file was incorrect. The -rt kernel adds more common fields to the trace
events. Namely, common_migrate_disable and common_preempt_lazy_count. Each
is one byte in size. This changes the alignment of the normal payload. Most
events are aligned normally, but the function and function graph events are
defined with a "PACKED" macro, that packs their payload. As the offsets
displayed in the format files are now calculated by an aligned field, the
aligned field for function and function graph events should be 1, not their
normal alignment.
With aligning of the funcgraph_entry event, the format file has:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:unsigned char common_migrate_disable; offset:8; size:1; signed:0;
field:unsigned char common_preempt_lazy_count; offset:9; size:1; signed:0;
field:unsigned long func; offset:16; size:8; signed:0;
field:int depth; offset:24; size:4; signed:1;
But the actual alignment is:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:unsigned char common_migrate_disable; offset:8; size:1; signed:0;
field:unsigned char common_preempt_lazy_count; offset:9; size:1; signed:0;
field:unsigned long func; offset:12; size:8; signed:0;
field:int depth; offset:20; size:4; signed:1;
Link: https://lkml.kernel.org/r/20200609220041.2a3b527f@oasis.local.home
Cc: stable@vger.kernel.org
Fixes: 04ae87a520 ("ftrace: Rework event_create_dir()")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a new "hist_debug" file for each trace event, which when read will
dump out a bunch of internal details about the hist triggers defined
on that event.
This is normally off but can be enabled by saying 'y' to the new
CONFIG_HIST_TRIGGERS_DEBUG config option.
This is in support of the new Documentation file describing histogram
internals, Documentation/trace/histogram-design.rst, which was
requested by developers trying to understand the internals when
extending or making use of the hist triggers for higher-level tools.
The histogram-design.rst documentation refers to the hist_debug files
and demonstrates their use with output in the test examples.
Link: http://lkml.kernel.org/r/77914c22b0ba493d9783c53bbfbc6087d6a7e1b1.1585941485.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's currently a way to select a task that should only have its events
traced, but there's no way to select a task not to have itsevents traced.
Add a set_event_notrace_pid file that acts the same as set_event_pid (and is
also affected by event-fork), but the task pids in this file will not be
traced even if they are listed in the set_event_pid file. This makes it easy
for tools like trace-cmd to "hide" itself from beint traced by events when
it is recording other tasks.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's currently a way to select a task that should only be traced by
functions, but there's no way to select a task not to be traced by the
function tracer. Add a set_ftrace_notrace_pid file that acts the same as
set_ftrace_pid (and is also affected by function-fork), but the task pids in
this file will not be traced even if they are listed in the set_ftrace_pid
file. This makes it easy for tools like trace-cmd to "hide" itself from the
function tracer when it is recording other tasks.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The set_ftrace_pid file is used to filter function tracing to only trace
tasks that are listed in that file. Instead of testing the pids listed in
that file (it's a bitmask) at each function trace event, the logic is done
via a sched_switch hook. A flag is set when the next task to run is in the
list of pids in the set_ftrace_pid file. But the sched_switch hook is not at
the exact location of when the task switches, and the flag gets set before
the task to be traced actually runs. This leaves a residue of traced
functions that do not belong to the pid that should be filtered on.
By changing the logic slightly, where instead of having a boolean flag to
test, record the pid that should be traced, with special values for not to
trace and always trace. Then at each function call, a check will be made to
see if the function should be ignored, or if the current pid matches the
function that should be traced, and only trace if it matches (or if it has
the special value to always trace).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When opening the "trace" file, it is no longer necessary to disable tracing.
Note, a new option is created called "pause-on-trace", when set, will cause
the trace file to emulate its original behavior.
Link: http://lkml.kernel.org/r/20200317213416.903351225@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 567cd4da54 ("ring-buffer: User context bit recursion checking")
added the TRACE_BUFFER bits to be used in the current task's trace_recursion
field. But the final submission of the logic removed the use of those bits,
but never removed the bits themselves (they were never used in upstream
Linux). These can be safely removed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Added new "bootconfig".
Looks for a file appended to initrd to add boot config options.
This has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and
kprobe events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
=WNds
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.
Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72
Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison
Use rcu_dereference_protected to dereference the newly annotated pointer.
Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison
Use rcu_dereference_protected to access the __rcu annotated pointer.
Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a new trace_array_find() function that can be used to find a trace
array given the instance name, and replace existing code that does the
same thing with it. Also add trace_array_find_get() which does the
same but returns the trace array after upping its refcount.
Also make both available for use outside of trace.c.
Link: http://lkml.kernel.org/r/cb68528c975eba95bee4561ac67dd1499423b2e5.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Move external function declarations into kernel/trace/trace.h
from trace_boot.c for tracing subsystem internal use.
Link: http://lkml.kernel.org/r/158029060405.12381.11944554430359702545.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As warnings can trigger panics, especially when "panic_on_warn" is set,
memory failure warnings can cause panics and fail fuzz testers that are
stressing memory.
Create a MEM_FAIL() macro to use instead of WARN() in the tracing code
(perhaps this should be a kernel wide macro?), and use that for memory
failure issues. This should stop failing fuzz tests due to warnings.
Link: https://lore.kernel.org/r/CACT4Y+ZP-7np20GVRu3p+eZys9GPtbu+JpfV+HtsufAzvTgJrg@mail.gmail.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As there's two struct ring_buffers in the kernel, it causes some confusion.
The other one being the perf ring buffer. It was agreed upon that as neither
of the ring buffers are generic enough to be used globally, they should be
renamed as:
perf's ring_buffer -> perf_buffer
ftrace's ring_buffer -> trace_buffer
This implements the changes to the ring buffer that ftrace uses.
Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As we are working to remove the generic "ring_buffer" name that is used by
both tracing and perf, the ring_buffer name for tracing will be renamed to
trace_buffer, and perf's ring buffer will be renamed to perf_buffer.
As there already exists a trace_buffer that is used by the trace_arrays, it
needs to be first renamed to array_buffer.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We have been trying to use rasdaemon to monitor hardware errors like
correctable memory errors. rasdaemon uses trace events to monitor
various hardware errors. In order to test it, we have to inject some
hardware errors, unfortunately not all of them provide error
injections. MCE does provide a way to inject MCE errors, but errors
like PCI error and devlink error don't, it is not easy to add error
injection to each of them. Instead, it is relatively easier to just
allow users to inject trace events in a generic way so that all trace
events can be injected.
This patch introduces trace event injection, where a new 'inject' is
added to each tracepoint directory. Users could write into this file
with key=value pairs to specify the value of each fields of the trace
event, all unspecified fields are set to zero values by default.
For example, for the net/net_dev_queue tracepoint, we can inject:
INJECT=/sys/kernel/debug/tracing/events/net/net_dev_queue/inject
echo "" > $INJECT
echo "name='test'" > $INJECT
echo "name='test' len=1024" > $INJECT
cat /sys/kernel/debug/tracing/trace
...
<...>-614 [000] .... 36.571483: net_dev_queue: dev= skbaddr=00000000fbf338c2 len=0
<...>-614 [001] .... 136.588252: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=0
<...>-614 [001] .N.. 208.431878: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=1024
Triggers could be triggered as usual too:
echo "stacktrace if len == 1025" > /sys/kernel/debug/tracing/events/net/net_dev_queue/trigger
echo "len=1025" > $INJECT
cat /sys/kernel/debug/tracing/trace
...
bash-614 [000] .... 36.571483: net_dev_queue: dev= skbaddr=00000000fbf338c2 len=0
bash-614 [001] .... 136.588252: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=0
bash-614 [001] .N.. 208.431878: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=1024
bash-614 [001] .N.1 284.236349: <stack trace>
=> event_inject_write
=> vfs_write
=> ksys_write
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The only thing that can't be injected is string pointers as they
require constant string pointers, this can't be done at run time.
Link: http://lkml.kernel.org/r/20191130045218.18979-1-xiyou.wangcong@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rework event_create_dir() to use an array of static data instead of
function pointers where possible.
The problem is that it would call the function pointer on module load
before parse_args(), possibly even before jump_labels were initialized.
Luckily the generated functions don't use jump_labels but it still seems
fragile. It also gets in the way of changing when we make the module map
executable.
The generated function are basically calling trace_define_field() with a
bunch of static arguments. So instead of a function, capture these
arguments in a static array, avoiding the function call.
Now there are a number of cases where the fields are dynamic (syscall
arguments, kprobes and uprobes), in which case a static array does not
work, for these we preserve the function call. Luckily all these cases
are not related to modules and so we can retain the function call for
them.
Also fix up all broken tracepoint definitions that now generate a
compile error.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132458.342979914@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adding 2 new functions -
1) struct trace_array *trace_array_get_by_name(const char *name);
Return pointer to a trace array with given name. If it does not exist,
create and return pointer to the new trace array.
2) int trace_array_set_clr_event(struct trace_array *tr,
const char *system ,const char *event, bool enable);
Enable/Disable events to this trace array.
Additionally,
- To handle reference counters, export trace_array_put()
- Due to introduction of the above 2 new functions, we no longer need to
export - ftrace_set_clr_event & trace_array_create APIs.
Link: http://lkml.kernel.org/r/1574276919-11119-2-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The latency_fsnotify() stub when the function is not defined, was missing
the "inline".
Link: https://lore.kernel.org/r/20191115140213.74c5efe7@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Declare the newly introduced and exported APIs in the header file -
include/linux/trace.h. Moving previous declarations from
kernel/trace/trace.h to include/linux/trace.h.
Link: http://lkml.kernel.org/r/1565805327-579-2-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch implements the feature that the tracing_max_latency file,
e.g. /sys/kernel/debug/tracing/tracing_max_latency will receive
notifications through the fsnotify framework when a new latency is
available.
One particularly interesting use of this facility is when enabling
threshold tracing, through /sys/kernel/debug/tracing/tracing_thresh,
together with the preempt/irqsoff tracers. This makes it possible to
implement a user space program that can, with equal probability,
obtain traces of latencies that occur immediately after each other in
spite of the fact that the preempt/irqsoff tracers operate in overwrite
mode.
This facility works with the hwlat, preempt/irqsoff, and wakeup
tracers.
The tracers may call the latency_fsnotify() from places such as
__schedule() or do_idle(); this makes it impossible to call
queue_work() directly without risking a deadlock. The same would
happen with a softirq, kernel thread or tasklet. For this reason we
use the irq_work mechanism to call queue_work().
This patch creates a new workqueue. The reason for doing this is that
I wanted to use the WQ_UNBOUND and WQ_HIGHPRI flags. My thinking was
that WQ_UNBOUND might help with the latency in some important cases.
If we use:
queue_work(system_highpri_wq, &tr->fsnotify_work);
then the work will (almost) always execute on the same CPU but if we are
unlucky that CPU could be too busy while there could be another CPU in
the system that would be able to process the work soon enough.
queue_work_on() could be used to queue the work on another CPU but it
seems difficult to select the right CPU.
Link: http://lkml.kernel.org/r/20191008220824.7911-2-viktor.rosendahl@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Viktor Rosendahl (BMW) <viktor.rosendahl@gmail.com>
[ Added max() to have one compare for max latency ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Looking for ways to shrink the size of the dyn_ftrace structure, knowing the
information about how many pages and the number of groups of those pages, is
useful in working out the best ways to save on memory.
This adds one info print on how many groups of pages were used to allocate
the ftrace dyn_ftrace structures, and also shows the number of pages and
groups in the dyn_ftrace_total_info (which is used for debugging).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, most files in the tracefs directory test if tracing_disabled is
set. If so, it should return -ENODEV. The tracing_disabled is called when
tracing is found to be broken. Originally it was done in case the ring
buffer was found to be corrupted, and we wanted to prevent reading it from
crashing the kernel. But it's also called if a tracing selftest fails on
boot. It's a one way switch. That is, once it is triggered, tracing is
disabled until reboot.
As most tracefs files can also be used by instances in the tracefs
directory, they need to be carefully done. Each instance has a trace_array
associated to it, and when the instance is removed, the trace_array is
freed. But if an instance is opened with a reference to the trace_array,
then it requires looking up the trace_array to get its ref counter (as there
could be a race with it being deleted and the open itself). Once it is
found, a reference is added to prevent the instance from being removed (and
the trace_array associated with it freed).
Combine the two checks (tracing_disabled and trace_array_get()) into a
single helper function. This will also make it easier to add lockdown to
tracefs later.
Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of having the trace events system open call open code the taking of
the trace_array descriptor (with trace_array_get()) and then calling
trace_open_generic(), have it use the tracing_open_generic_tr() that does
the combination of the two. This requires making tracing_open_generic_tr()
global.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
After r372664 in clang, the IF_ASSIGN macro causes a couple hundred
warnings along the lines of:
kernel/trace/trace_output.c:1331:2: warning: converting the enum
constant to a boolean [-Wint-in-bool-context]
kernel/trace/trace.h:409:3: note: expanded from macro
'trace_assign_type'
IF_ASSIGN(var, ent, struct ftrace_graph_ret_entry,
^
kernel/trace/trace.h:371:14: note: expanded from macro 'IF_ASSIGN'
WARN_ON(id && (entry)->type != id); \
^
264 warnings generated.
This warning can catch issues with constructs like:
if (state == A || B)
where the developer really meant:
if (state == A || state == B)
This is currently the only occurrence of the warning in the kernel
tree across defconfig, allyesconfig, allmodconfig for arm32, arm64,
and x86_64. Add the implicit '!= 0' to the WARN_ON statement to fix
the warnings and find potential issues in the future.
Link: 28b38c277a
Link: https://github.com/ClangBuiltLinux/linux/issues/686
Link: http://lkml.kernel.org/r/20190926162258.466321-1-natechancellor@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The name tracing_reset() was a misnomer, as it really only reset a single
CPU buffer. Rename it to tracing_reset_cpu() and also make it static and
remove the prototype from trace.h, as it is only used in a single function.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.
Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:
In function 'memset',
inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
./include/linux/string.h:344:9: warning: '__builtin_memset' offset
[8505, 8560] from the object at 'iter' is out of the bounds of
referenced subobject 'seq' with type 'struct trace_seq' at offset
4368 [-Warray-bounds]
344 | return __builtin_memset(p, c, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.
Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.
Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Removing of non-DYNAMIC_FTRACE from 32bit x86
- Removing of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on config
options
And other minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXNxMZxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq4PAP44kP6VbwL8CHyI2A3xuJ6Hwxd+2Z2r
ip66RtzyJ+2iCgEA2QCuWUlEt2bLpF9a8IQ4N9tWenSeW2i7gunPb+tioQw=
=RVQo
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major changes in this tracing update includes:
- Removal of non-DYNAMIC_FTRACE from 32bit x86
- Removal of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on
config options
And other minor fixes and clean ups"
* tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
x86: Hide the int3_emulate_call/jmp functions from UML
livepatch: Remove klp_check_compiler_support()
ftrace/x86: Remove mcount support
ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
tracing: Simplify "if" macro code
tracing: Fix documentation about disabling options using trace_options
tracing: Replace kzalloc with kcalloc
tracing: Fix partial reading of trace event's id file
tracing: Allow RCU to run between postponed startup tests
tracing: Fix white space issues in parse_pred() function
tracing: Eliminate const char[] auto variables
ring-buffer: Fix mispelling of Calculate
tracing: probeevent: Fix to make the type of $comm string
tracing: probeevent: Do not accumulate on ret variable
tracing: uprobes: Re-enable $comm support for uprobe events
ftrace/x86_64: Emulate call function while updating in breakpoint handler
x86_64: Allow breakpoints to emulate call instructions
x86_64: Add gap to int3 to allow for call emulation
tracing: kdb: Allow ftdump to skip all but the last few entries
tracing: Add trace_total_entries() / trace_total_entries_cpu()
...
These two new exported functions will be used in a future patch by
kdb_ftdump() to quickly skip all but the last few trace entries.
Link: http://lkml.kernel.org/r/20190319171206.97107-2-dianders@chromium.org
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It's only used in trace.c and there is absolutely no point in compiling it
in when user space stack traces are not supported.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: David Rientjes <rientjes@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: linux-btrfs@vger.kernel.org
Cc: dm-devel@redhat.com
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-arch@vger.kernel.org
Link: https://lkml.kernel.org/r/20190425094803.162400595@linutronix.de
As each instance has their own error_log file, it makes more sense that the
instances show the errors of their own instead of all error_logs having the
same data. Make it that the errors show up in the instance error_log file
that the error happens in. If no instance trace_array is available, then
NULL can be passed in which will create the error in the top level instance
(the one at the top of the tracefs directory).
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pass in the trace_array that represents the instance the filter being
changed is in to create_event_filter(). This will allow for error messages
that happen when writing to the filter can be displayed in the proper
instance "error_log" file.
Note, for calls to create_filter() (that was also modified to support
create_event_filter()), that changes filters that do not exist in a instance
(for perf for example), NULL may be passed in, which means that there will
not be any message to log for that filter.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
