Pull RAS updates from Ingo Molnar:
"Various RAS updates:
- AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable
MCA) error decoding support (Aravind Gopalakrishnan)
- x86 memcpy_mcsafe() support, to enable smart(er) hardware error
recovery in NVDIMM drivers, based on an extension of the x86
exception handling code. (Tony Luck)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/sb_edac: Fix computation of channel address
x86/mm, x86/mce: Add memcpy_mcsafe()
x86/mce/AMD: Document some functionality
x86/mce: Clarify comments regarding deferred error
x86/mce/AMD: Fix logic to obtain block address
x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors
x86/mce: Move MCx_CONFIG MSR definitions
x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries
x86/mm: Expand the exception table logic to allow new handling options
x86/mce/AMD: Set MCAX Enable bit
x86/mce/AMD: Carve out threshold block preparation
x86/mce/AMD: Fix LVT offset configuration for thresholding
x86/mce/AMD: Reduce number of blocks scanned per bank
x86/mce/AMD: Do not perform shared bank check for future processors
x86/mce: Fix order of AMD MCE init function call
Large memory Haswell-EX systems with multiple DIMMs per channel were
sometimes reporting the wrong DIMM.
Found three problems:
1) Debug printouts for socket and channel interleave were not interpreting
the register fields correctly. The socket interleave field is a 2^X
value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2,
2=3. 3=4).
2) Actual use of the socket interleave value didn't interpret as 2^X
3) Conversion of address to channel address was complicated, and wrong.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For Scalable MCA enabled processors, errors are listed per IP block. And
since it is not required for an IP to map to a particular bank, we need
to use HWID and McaType values from the MCx_IPID register to figure out
which IP a given bank represents.
We also have a new bit (TCC) in the MCx_STATUS register to indicate Task
context is corrupt.
Add logic here to decode errors from all known IP blocks for Fam17h
Model 00-0fh and to print TCC errors.
[ Minor fixups. ]
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1457021458-2522-3-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Correct a typo introduced by
d0cdf90031 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support")
As a result under some configurations DIMMs were not correctly
recognized. Problem affects only Xeon Phi architecture.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
debugfs_remove() is used to remove a file or a directory from the
debugfs filesystem on an EDAC device exit. However edac_debugfs might
not be empty. This is similar to
30f84a891b ("EDAC: Use edac_debugfs_remove_recursive()")
which changed the EDAC MCI code to use edac_debugfs_remove_recursive().
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455064165-3816-1-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We were getting this build warning:
drivers/edac/mpc85xx_edac.c:1247:6: warning: unused variable 'pvr'
pvr is only used if CONFIG_FSL_SOC_BOOKE is defined. Declare it
__maybe_unused.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1454427573-7994-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
They're both running only when ->edac_check is initialized so remove
that check from the workqueue function itself. Synchronize/generalize
the ->op_state check between the two.
Kill useless comments, while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
We use the ->edac_check function pointers to determine whether we need
to setup a polling workqueue. However, the destroy path is not balanced
and we might try to teardown an unitialized workqueue.
Balance init and destroy paths by looking at ->edac_check in both cases.
Set op_state to OP_OFFLINE *before* destroying anything.
Reported-by: Zhiqiang Hou <Zhiqiang.Hou@freescale.com>
Cc: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
dct_sel_base_off is declared as a u64 but we're only using the lower 32
bits because of a shift wrapping bug. This can possibly truncate the
upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS
row.
Fixes: c8e518d567 ('amd64_edac: Sanitize f10_get_base_addr_offset')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwanda
Signed-off-by: Borislav Petkov <bp@suse.de>
Knights Landing does not come with register that could be used to fetch
DIMM width. However the value is fixed for this architecture so it can
be hardcoded.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449840082-18673-1-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Hide the EDAC workqueue pointer in a separate compilation unit and add
accessors for the workqueue manipulations needed.
Remove edac_pci_reset_delay_period() which wasn't used by anything. It
seems it got added without a user with
91b99041c1 ("drivers/edac: updated PCI monitoring")
Signed-off-by: Borislav Petkov <bp@suse.de>
It cannot fail now. We either load EDAC core after having successfully
initialized edac_subsys or we don't.
Signed-off-by: Borislav Petkov <bp@suse.de>
This was really dumb - reference counting for the main EDAC sysfs
object. While we could've simply registered it as the first thing in the
module init path and then hand it around to what needs it.
Do that and rip out all the code around it, thus simplifying the whole
handling significantly.
Move the edac_subsys node back to edac_module.c.
Signed-off-by: Borislav Petkov <bp@suse.de>
EDAC workqueue destruction is really fragile. We cancel delayed work
but if it is still running and requeues itself, we still go ahead and
destroy the workqueue and the queued work explodes when workqueue core
attempts to run it.
Make the destruction more robust by switching op_state to offline so
that requeuing stops. Cancel any pending work *synchronously* too.
EDAC i7core: Driver loaded.
general protection fault: 0000 [#1] SMP
CPU 12
Modules linked in:
Supported: Yes
Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7
RIP: 0010:[<ffffffff8107dcd7>] [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0
< ... regs ...>
Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600)
Stack:
...
Call Trace:
call_timer_fn
run_timer_softirq
__do_softirq
call_softirq
do_softirq
irq_exit
smp_apic_timer_interrupt
apic_timer_interrupt
intel_idle
cpuidle_idle_call
cpu_idle
Code: ...
RIP __queue_work
RSP <...>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Originally the mpc85xx-pci-edac driver bound directly to the PCI
controller node.
Commit
905e75c46d ("powerpc/fsl-pci: Unify pci/pcie initialization code")
turned the PCI controller code into a platform device. Since we can't
have two drivers binding to the same device, the EDAC code was changed
to be called into as a library-style submodule. However, this doesn't
work if the EDAC driver is built as a module.
Commit
8d8fcba6d1ea ("EDAC: Rip out the edac_subsys reference counting")
exposed another problem with this approach -- mpc85xx_pci_err_probe()
was being called in the same early boot phase that the PCI controller
is initialized, rather than in the device_initcall phase that the EDAC
layer expects. This caused a crash on boot.
To fix this, the PCI controller code now creates a child platform device
specifically for EDAC, which the mpc85xx-pci-edac driver binds to.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Jia Hongtao <B38951@freescale.com>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: http://lkml.kernel.org/r/1449774432-18593-1-git-send-email-scottwood@freescale.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Knights Landing is the next generation architecture for HPC market.
KNL introduces concept of a tile and CHA - Cache/Home Agent for memory
accesses.
Some things are fixed in KNL:
() There's single DIMM slot per channel
() There's 2 memory controllers with 3 channels each, however,
from EDAC standpoint, it is presented as single memory controller
with 6 channels. In order to represent 2 MCs w/ 3 CH, it would
require major redesign of EDAC core driver.
Basically, two functionalities are added/extended:
() during driver initialization KNL topology is being recognized, i.e.
which channels are populated with what DIMM sizes
(knl_get_dimm_capacity function)
() handle MCE errors - channel swizzling
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-5-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Add options to sbridge_get_all_devices() to allow for duplicate device
IDs and devices that are scattered across mulitple PCI buses.
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-4-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
SAD limit, interleave mode and DRAM related functionalities are now
virtualized, so that overriding them is easier.
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-3-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1449073138-10852-2-git-send-email-thierry.reding@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1449136632-11680-1-git-send-email-thierry.reding@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig
to clean up various abuses of headers in there. The patch to rename the
io-64-nonatomic-*.h headers caused some conflicts with new users, so I
added a workaround that we can remove in the next merge window.
The only other patch is a warning fix from Marek Vasut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dQKG
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"The asm-generic changes for 4.4 are mostly a series from Christoph
Hellwig to clean up various abuses of headers in there. The patch to
rename the io-64-nonatomic-*.h headers caused some conflicts with new
users, so I added a workaround that we can remove in the next merge
window.
The only other patch is a warning fix from Marek Vasut"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h
asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
gpio-mxc: stop including <asm-generic/bug>
n_tracesink: stop including <asm-generic/bug>
n_tracerouter: stop including <asm-generic/bug>
mlx5: stop including <asm-generic/kmap_types.h>
hifn_795x: stop including <asm-generic/kmap_types.h>
drbd: stop including <asm-generic/kmap_types.h>
move count_zeroes.h out of asm-generic
move io-64-nonatomic*.h out of asm-generic
Pull RAS changes from Ingo Molnar:
"The main system reliability related changes were from x86, but also
some generic RAS changes:
- AMD MCE error injection subsystem enhancements. (Aravind
Gopalakrishnan)
- Fix MCE and CPU hotplug interaction bug. (Ashok Raj)
- kcrash bootup robustness fix. (Baoquan He)
- kcrash cleanups. (Borislav Petkov)
- x86 microcode driver rework: simplify it by unmodularizing it and
other cleanups. (Borislav Petkov)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/mce: Add a default case to the switch in __mcheck_cpu_ancient_init()
x86/mce: Add a Scalable MCA vendor flags bit
MAINTAINERS: Unify the microcode driver section
x86/microcode/intel: Move #ifdef DEBUG inside the function
x86/microcode/amd: Remove maintainers from comments
x86/microcode: Remove modularization leftovers
x86/microcode: Merge the early microcode loader
x86/microcode: Unmodularize the microcode driver
x86/mce: Fix thermal throttling reporting after kexec
kexec/crash: Say which char is the unrecognized
x86/setup/crash: Check memblock_reserve() retval
x86/setup/crash: Cleanup some more
x86/setup/crash: Remove alignment variable
x86/setup: Cleanup crashkernel reservation functions
x86/amd_nb, EDAC: Rename amd_get_node_id()
x86/setup: Do not reserve crashkernel high memory if low reservation failed
x86/microcode/amd: Do not overwrite final patch levels
x86/microcode/amd: Extract current patch level read to a function
x86/ras/mce_amd_inj: Inject bank 4 errors on the NBC
x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts
...
The PAGES_TO_MiB macro is used for unit conversion but the
trace_mc_event() tracepoint expects a page address. Fix that.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1445341538-24271-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Borislav Petkov <bp@suse.de>
This function doesn't give us the "Node ID" as the function name
suggests. Rather, it receives a PCI device as argument, checks
the available F3 PCI device IDs in the system and returns the
index of the matching Bus/Device IDs.
Rename it to amd_pci_dev_to_node_id().
No functional change is introduced.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1445246268-26285-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The bootloader may or may not enable the ECC_CORR_EN bit. By
not enabling ECC_CORR_EN, when error happens, it is the user's
responsibility to perform a full SDRAM scrub.
Remove the check for ECC_CORR_EN.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Thor Thayer <tthayer@opensource.altera.com>
Link: http://lkml.kernel.org/r/1444864456-21778-1-git-send-email-dinguyen@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
These are not implementations of default architecture code but helpers
for drivers. Move them to the place they belong to.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
debugfs_remove() is used to remove a file or a directory from the
debugfs filesystem, but mci->debugfs might not empty.
This can be triggered by the following sequence:
1) Enable CONFIG_EDAC_DEBUG
2) insmod an EDAC module (like i3000_edac or similar)
3) rmmod this module
4) we can see files remaining under <debugfs_mountpoint>/edac/ like
"fake_inject", for example.
Removing edac_core then, causes a NULL pointer dereference.
Reported-by: Yun Wu (Abel) <wuyun.wu@huawei.com>
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1444787364-104353-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Borislav Petkov <bp@suse.de>
This platform driver has an OF device ID table but the OF module alias
information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20150917114619.GA13145@goodgumbo.baconseed.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Git provides us all the changelogs anyway. So trim the comments section
here. Update the copyrights info while at it.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-3-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The scrub rate control register has moved to function 2 in PCI config
space and is at a different offset on family 0x15, models 0x60 and
later. The minimum recommended scrub rate has also changed. (Refer to
D18F2x1c9_dct[1:0][DramScrub] in Fam15hM60h BKDG).
Adjust set_scrub_rate() and get_scrub_rate() functions to accommodate
this.
Tested on F15hM60h, Fam15h, models 00h-0fh and Fam10h systems.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-2-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Cleanup conditionals. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Updating dimm_label to an empty string does not make much sense. Change
the sysfs dimm_label store operation to fail a request when an input
string is empty.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: elliott@hpe.com
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443124767.25474.172.camel@hpe.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Sysfs "dimm_label" and "chX_dimm_label" nodes have the following issues
in their store operation:
1) A newline-terminated input string causes redundant newlines:
# echo "test" > /sys/bus/mc0/devices/dimm0/dimm_label
# cat /sys/bus/mc0/devices/dimm0/dimm_label
test
# od -bc /sys/bus/mc0/devices/dimm0/dimm_label
0000000 164 145 163 164 012 012
t e s t \n \n
0000006
2) The original label string (31 characters) cannot be stored due to
an improper size check:
# echo "CPU_SrcID#0_Ha#0_Chan#0_DIMM#0" > /sys/bus/mc0/devices/dimm0/dimm_label
# cat /sys/bus/mc0/devices/dimm0/dimm_label
# od -bc /sys/bus/mc0/devices/dimm0/dimm_label
0000000 012 012
\n \n
0000002
3) An input string longer than the buffer size results a wrong label
info as it allows a retry with the remaining string:
# echo "CPU_SrcID#0_Ha#0_Chan#0_DIMM#0_TEST" > /sys/bus/mc0/devices/dimm0/dimm_label
# cat /sys/bus/mc0/devices/dimm0/dimm_label
_TEST
Fix these issues by making the following changes:
1) Replace a newline character at the end by setting a null. It also
assures that the string is null-terminated in the label buffer.
2) Check the label buffer size with 'sizeof(dimm->label)'.
3) Fail a request if its string exceeds the label buffer size.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Robert Elliott <elliott@hpe.com>
Link: http://lkml.kernel.org/r/1443121564.25474.160.camel@hpe.com
Signed-off-by: Borislav Petkov <bp@suse.de>
After
7d375bffa5 ("sb_edac: Fix support for systems with two home agents per socket")
sysfs "dimm_label" and "chX_dimm_label" show their label string without a
newline "\n" at the end.
[root@orange ~]# cat /sys/bus/mc0/devices/dimm0/dimm_label
CPU_SrcID#0_Ha#0_Chan#0_DIMM#0[root@orange ~]#
[root@orange ~]# cat /sys/devices/system/edac/mc/mc0/csrow0/ch0_dimm_label
CPU_SrcID#0_Ha#0_Chan#0_DIMM#0[root@orange ~]#
The label strings now have 31 characters, which are the same as
EDAC_MC_LABEL_LEN. Since the snprintf()s in channel_dimm_label_show()
and dimmdev_label_show() limit the whole length by EDAC_MC_LABEL_LEN,
the newline in the format "%s\n" is ignored.
[root@orange ~]# od -bc /sys/bus/mc0/devices/dimm0/dimm_label
0000000 103 120 125 137 123 162 143 111 104 043 060 137 110 141 043 060
C P U _ S r c I D # 0 _ H a # 0
0000020 137 103 150 141 156 043 060 137 104 111 115 115 043 060 000
_ C h a n # 0 _ D I M M # 0 \0
0000037
Fix it by using 'sizeof(dimm->label) + 1' as the whole length in the
snprintf()s in channel_dimm_label_show() and dimmdev_label_show().
Reported-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1442933883-21587-2-git-send-email-toshi.kani@hpe.com
Signed-off-by: Borislav Petkov <bp@suse.de>
In commit
7d375bffa5 ("sb_edac: Fix support for systems with two home agents per socket")
NUM_CHANNELS was changed to 8 and the channel space was renumerated to
handle EN, EP, and EX configurations.
The *_mci_bind_devs() functions - except for sbridge_mci_bind_devs() -
got a new device presence check in the form of saw_chan_mask. However,
sbridge_mci_bind_devs() still uses the NUM_CHANNELS for loop.
With the increase in NUM_CHANNELS, this loop fails at index 4 since
SB only has 4 TADs. This results in the following error on SB machines:
EDAC sbridge: Some needed devices are missing
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Couldn't find mci handle
This patch adapts the saw_chan_mask logic for sbridge_mci_bind_devs() as
well.
After this patch:
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:3f:0e.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#1: DEV 0000:7f:0e.0 (POLLED)
Signed-off-by: Seth Jennings <sjenning@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # v4.2
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1438798561-10180-1-git-send-email-sjenning@redhat.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We already have edac_mem_types[] that enumerates the different kinds of
memory. So, use that and remove the redundant memory_type[] array here.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1442436811-23382-2-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Drop CONFIG_EDAC_DEBUG ifdeffery too, while at it.
Tested-by: Loc Ho <lho@apm.com>
Cc: linux-edac@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
This driver creates its debugfs hierarchy under the toplevel debugfs dir
- see i5100_init() - so make it use edac_debugfs_create_dir_at( , NULL)
because we're not breaking userspace. Oh well.
Signed-off-by: Borislav Petkov <bp@suse.de>
... into a separate compilation unit and drop a couple of
CONFIG_EDAC_DEBUG ifdefferies. Rename edac_create_debug_nodes() to
edac_create_debugfs_nodes(), while at it.
No functionality change.
Cc: <linux-edac@vger.kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
dimm_dev_type has been incorrectly determined in sb_edac. This patch fixes it
for Ivy Bridge and Haswell only since nothing like exists for Sandy Bridge.
We tested this patch in multiple systems matching the results with the
installed memory modules.
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In case the memory banks are populated so the first channel isn't used, the
DDRIO PCI device won't be visible and it won't be possible to determine the
memory type.
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pull RAS updates from Ingo Molnar:
"MCE handling updates, but also some generic drivers/edac/ changes to
better organize the Kconfig space"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ras: Move AMD MCE injector to arch/x86/ras/
x86/mce: Add a wrapper around mce_log() for injection
x86/mce: Rename rcu_dereference_check_mce() to mce_log_get_idx_check()
RAS: Add a menuconfig option with descriptive text
x86/mce: Reenable CMCI banks when swiching back to interrupt mode
x86/mce: Clear Local MCE opt-in before kexec
x86/mce: Remove unused function declarations
x86/mce: Kill drain_mcelog_buffer()
x86/mce: Avoid potential deadlock due to printk() in MCE context
x86/mce: Remove the MCE ring for Action Optional errors
x86/mce: Don't use percpu workqueues
x86/mce: Provide a lockless memory pool to save error records
x86/mce: Reuse one of the u16 padding fields in 'struct mce'
This is an x86-specific module and would benefit from being
closer to the arch code. Move it there. Update copyright while
at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1439396985-12812-14-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This used to flush out MCEs logged during early boot and which
were in the MCA registers from a previous system run. No need
for that now, since we've moved to a genpool.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1439396985-12812-7-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use unified genpool to save Action Optional error events and put
Action Optional error handling in the same notification chain as
MCE error decoding.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
[ Fold in subsequent patch from Boris for early boot logging. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
[ Correct a lot. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1439396985-12812-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The commit
de3910eb79 ("edac: change the mem allocation scheme to
make Documentation/kobject.txt happy")
changed the memory allocation for the csrows member. But ppc4xx_edac was
forgotten in the patch. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: <stable@vger.kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc
Signed-off-by: Borislav Petkov <bp@suse.de>
Currently, when decoding an MCE, we display 'CE' for a Deferred error, like
this:
[Hardware Error]: CPU:0 (15:2:0) MC4_STATUS[Over|CE|MiscV|-|AddrV|Deferred|-|UECC]: 0xdc04b00095080813
When the 'UC' bit in the MCx_STATUS register is clear, the error status
is either a Corrected error or Deferred error as determined by the
'Deferred' bit. So do not print 'CE' on a deferred error.
Refer to AMD Error Scope Hierarchy table in a newer BKDG (example:
49125_15h_Models_30h-3Fh_BKDG.pdf, section "RAS Features").
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1436788382-6463-1-git-send-email-aravind.gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Loc Ho <lho@apm.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1436507243-11159-1-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Here is the driver core / firmware changes for 4.2-rc1.
A number of small changes all over the place in the driver core, and in
the firmware subsystem. Nothing really major, full details in the
shortlog. Some of it is a bit of churn, given that the platform driver
probing changes was found to not work well, so they were reverted.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlWNoCQACgkQMUfUDdst+ym4JACdFrrXoMt2pb8nl5gMidGyM9/D
jg8AnRgdW8ArDA/xOarULd/X43eA3J3C
=Al2B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the driver core / firmware changes for 4.2-rc1.
A number of small changes all over the place in the driver core, and
in the firmware subsystem. Nothing really major, full details in the
shortlog. Some of it is a bit of churn, given that the platform
driver probing changes was found to not work well, so they were
reverted.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
Revert "base/platform: Only insert MEM and IO resources"
Revert "base/platform: Continue on insert_resource() error"
Revert "of/platform: Use platform_device interface"
Revert "base/platform: Remove code duplication"
firmware: add missing kfree for work on async call
fs: sysfs: don't pass count == 0 to bin file readers
base:dd - Fix for typo in comment to function driver_deferred_probe_trigger().
base/platform: Remove code duplication
of/platform: Use platform_device interface
base/platform: Continue on insert_resource() error
base/platform: Only insert MEM and IO resources
firmware: use const for remaining firmware names
firmware: fix possible use after free on name on asynchronous request
firmware: check for file truncation on direct firmware loading
firmware: fix __getname() missing failure check
drivers: of/base: move of_init to driver_init
drivers/base: cacheinfo: fix annoying typo when DT nodes are absent
sysfs: disambiguate between "error code" and "failure" in comments
driver-core: fix build for !CONFIG_MODULES
driver-core: make __device_attach() static
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bjTk
-----END PGP SIGNATURE-----
Merge tag 'edac/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull edac updates from Mauro Carvalho Chehab:
"Some fixes and additions to the EDAC driver used on modern Intel x86
CPUs. It includes support for Broadwell EP/EX platforms and fixes for
motherboards with more than 2 CPU sockets"
* tag 'edac/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
sb_edac: support for Broadwell -EP and -EX
sb_edac: Fix support for systems with two home agents per socket
sb_edac: Fix a typo and a thinko in address handling for Haswell
EDAC: Remove arbitrary limit on number of channels
When during injection we populate MCi_MISC by writing into misc, we need
to set the MiscV bit in the corresponding MCi_STATUS register which
denotes that there's valid info in the MCi_MISC register.
Signed-off-by: Borislav Petkov <bp@suse.de>
Save us an indentation level, widen to 80 cols, make the text more
succinct and slender. Use i as the bank variable, same as what the
documentation uses.
Signed-off-by: Borislav Petkov <bp@suse.de>
Suspend-to-RAM and EDAC support are mutually exclusive on SOCFPGA. If
EDAC is enabled, it will prevent the platform from going into suspend.
The reason is that the IRQ vectors for OCRAM reside on DDR and in
Suspend-to-RAM mode we're executing out of OCRAM. If an ECC error
occurs, we can't handle it so it was decided to make them mutually
exclusive.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: dinh.linux@gmail.com
Cc: dougthompson@xmission.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: tthayer@opensource.altera.com
Link: http://lkml.kernel.org/r/1433512155-9906-1-git-send-email-dinguyen@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Provide information about each injection file and its usage for ease of
use and in-band documentation. This is a good idea adapted from ftrace.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1433277362-10911-7-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Add per-file permissions to the dfs_fls[] array.
In a later patch, we will add a README file that needs different
permissions. Hence the move here to add a perm field.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1433277362-10911-6-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Use strings such as "hw" or "sw" to indicate the type of error injection
to be performed.
Current flags attribute derives the meanings of values that can be
programmed into it from asm/mce.h. Moving to defined strings for the
attribute allows this module to be self-sufficient and removes the
dependency. Also, we can introduce new flags as and when needed without
having to worry about conflicting with the flags already defined in
asm/mce.h.
Also, modify do_inject() to use the newly defined injection_type enum to
figure out the injection mechanism we need to use
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1433277362-10911-4-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Use strstrip() return value. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The number of banks for a given processor is encoded in
MSR_IA32_MCG_CAP[7:0]. So obtain the value from that MSR and use it for
sanity checking in inj_bank_set() instead of doing a family/model check.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Link: http://lkml.kernel.org/r/1432753418-2985-3-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Basic support for the single socket Broadwell-DE processor
was added back in commit 1f39581a9a
sb_edac: Add support for Broadwell-DE processor
This patch extends Broadwell support to cover the two
socket "-EP" and four socket "-EX" versions of Broadwell.
Only tested on the 2 socket - but this code is largely
cloned from the Haswell path.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
First noticed a problem on a 4 socket machine where EDAC only reported
half the DIMMS. Tracked this down to the code that assumes that systems
with two home agents only have two memory channels on each agent. This
is true on 2 sockect ("-EP") machines. But four socket ("-EX") machines
have four memory channels on each home agent.
The old code would have had problems on two socket systems as it did
a shuffling trick to make the internals of the code think that the
channels from the first agent were '0' and '1', with the second agent
providing '2' and '3'. But the code didn't uniformly convert from
{ha,channel} tuples to this internal representation.
New code always considers up to eight channels.
On a machine with a single home agent these map easily to edac channels
0, 1, 2, 3. On machines with two home agents we map using:
edac_channel = 4*ha# + channel
So on a -EP machine where each home agent supports only two channels
we'll fill in channels 0, 1, 4, 5, and on a -EX machine we use all of 0,
1, 2, 3, 4, 5, 6, 7.
[mchehab@osg.samsung.com: fold a fixup patch as per Tony's request and fixed
a few CodingStyle issues]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
typo: "a7mode" chooses whether to use bits {8, 7, 9} or {8, 7, 6}
in the algorithm to spread access between memory resources. But
the non-a7mode path was incorrectly using GET_BITFIELD(addr, 7, 9)
and so picking bits {9, 8, 7}
thinko: BIT(1) of the dram_rule registers chooses whether to just
use the {8, 7, 6} (or {8, 7, 9}) bits mentioned above as they are,
or to XOR them with bits {18, 17, 16} but the code inverted the
test. We need the additional XOR when dram_rule{1} == 0.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently set to "6", but the reset of the code will dynamically
allocate as needed. We need to go to "8" today, but drop the check
completely to save doing this again when we need even larger numbers.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
<asm/edac.h> contains only the arch-specific scrubbing function and is
thus not needed in edac_stub.c. Kill it.
Signed-off-by: Borislav Petkov <bp@suse.de>
So first of all, this atomic_scrub() function's naming is bad. It looks
like an atomic_t helper. Change it to edac_atomic_scrub().
The bigger problem is that this function is arch-specific and every new
arch which doesn't necessarily need that functionality still needs to
define it, otherwise EDAC doesn't compile.
So instead of doing that and including arch-specific headers, have each
arch define an EDAC_ATOMIC_SCRUB symbol which can be used in edac_mc.c
for ifdeffery. Much cleaner.
And we already are doing this with another symbol - EDAC_SUPPORT. This
is also much cleaner than having CONFIG_EDAC enumerate all the arches
which need/have EDAC support and drivers.
This way I can kill the useless edac.h header in tile too.
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Chris Metcalf <cmetcalf@ezchip.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "Maciej W. Rozycki" <macro@codesourcery.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Steven J. Hill" <Steven.Hill@imgtec.com>
Cc: x86@kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
While testing asynchronous PCI probe on this driver I noticed it failed
because the driver checks if any of the PCI devices have been bound to
the driver after registering it, which obviously does not work if
probing is asynchronous.
While there are patches and discussions on how the driver should behave
are ongoing, let's enforce synchronous probe for this driver for now.
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
