According to the DP spec supporting vswing 1 + preemph 2 is
mandatory. We don't have the hw settings for that though. In
order to pretend to follow the DP spec let's just select
vswing 0 + preemph 2 in this case (the DP spec says to use
the requested preemph in preference to the vswing when the
requested values aren't supported).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
cpt/ppt support pre-emphasis level 3. Let's actually declare
support for it, instead of clamping things to level 2.
Also tweak the if-ladder in intel_dp_voltage_max() to match
intel_dp_pre_emphasis_max() to make it easier to compare them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We infrequently use the direct i915 backpointer from the i915_request,
so do we really need to waste the space in the struct for it? 8 bytes
from the most frequently allocated struct vs an 3 bytes and pointer
chasing in using rq->engine->i915?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602220953.21178-1-chris@chris-wilson.co.uk
If we injected an error (such as pretending the GuC firmware was
broken), then suppress the error message as it is expected and our CI
complains if it sees any *ERROR*.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603104657.25651-1-chris@chris-wilson.co.uk
For reasons that be, the HW only allows usersace to read its own
CTX_TIMESTAMP [context local HW runtime] on rcs. Make it available for
all by adding it to the whitelists.
v2: The change took effect from Cometlake.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602154839.6902-1-chris@chris-wilson.co.uk
Cometlake is a small refresh of Coffeelake, but since we have found out a
difference in the plaforms, we need to identify them as separate platforms.
Since we previously took Coffeelake/Cometlake as identical, update all
IS_COFFEELAKE() to also include IS_COMETLAKE().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602140541.5481-1-chris@chris-wilson.co.uk
As a timestamp will automatically update itself, it will not hold only
contexts we write into it, and will change from the baseline value
making us suspect that our writes are landing. As this confuses us and
we would need more careful treatment to detect invalid stores into the
timestamp, skip it when verifying the whitelists.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602154839.6902-1-chris@chris-wilson.co.uk
If an error is encountered during the DSI initialization setup, the
drm connector object also needs to be cleaned up along with the encoder.
The error can happen due to a missing mode in the VBT or for other
reasons.
v2: Rephrase the commit message to make it more clear.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522202630.7604-1-vivek.kasireddy@intel.com
Only support runtime changes through the debugfs.
i915.verbose_state_checks remains an exception, and is not exposed via
debugfs.
This depends on IGT having been updated to use the debugfs for modifying
the parameters.
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601215510.18379-3-jani.nikula@intel.com
fake_lmem_start does not need to be mutable via module param sysfs. It's
only used during driver probe.
Fixes: 1629224324 ("drm/i915/lmem: add the fake lmem region")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601215510.18379-2-jani.nikula@intel.com
The parameter only makes sense as a module parameter only.
Fixes: c43c5a8818 ("drm/i915/params: add i915 parameters to debugfs")
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601215510.18379-1-jani.nikula@intel.com
Pull the routines for writing CS packets out of intel_ring_submission
into their own files. These are low level operations for building CS
instructions, rather than the logic for filling the global ring buffer
with requests, and we will want to reuse them outside of this context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601072446.19548-2-chris@chris-wilson.co.uk
Allow batch buffers to read their own _local_ cumulative HW runtime of
their logical context.
Fixes: 0f2f397583 ("drm/i915: Add gen9 BCS cmdparsing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601161942.30854-1-chris@chris-wilson.co.uk
Ever noticed that our interrupt handlers are where we spend most of our
time on a busy system? In part this is unavoidable as each interrupt
requires to poll and reset several registers, but we can try and do so as
efficiently as possible.
Function old new delta
ilk_irq_handler 2317 2156 -161
v2: Restore the irqreturn_t ret
Function old new delta
ilk_irq_handler.cold 63 72 +9
ilk_irq_handler 2221 2080 -141
A slight improvement in the baseline overnight as well!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601140355.20243-1-chris@chris-wilson.co.uk
While the current locking/serialization of the global state
suffices for protecting the obj->state access and the actual
hardware reprogramming, we do have a problem with accessing
the old/new states during nonblocking commits.
The state computation and swap will be protected by the crtc
locks, but the commit_tails can finish out of order, thus also
causing the atomic states to be cleaned up out of order. This
would mean the commit that started first but finished last has
had its new state freed as the no-longer-needed old state by the
other commit.
To fix this let's just refcount the states. obj->state amounts
to one reference, and the intel_atomic_state holds extra references
to both its new and old global obj states.
Fixes: 0ef1905ecf ("drm/i915: Introduce better global state handling")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527200245.13184-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Our forcewake utilisation is split into categories: automatic and
manual. Around bare register reads, we look up the right forcewake
domain and automatically acquire and release [upon a timer] the
forcewake domain. For other access, where we know we require the
forcewake across a group of register reads, we manually acquire the
forcewake domain and release it at the end. Again, this currently arms
the domain timer for a later release.
However, looking at some energy utilisation profiles, we have tried to
avoid using forcewake [and rely on the natural wake up to post register
updates] due to that even keep the fw active for a brief period
contributes to a significant power draw [i.e. when the gpu is sleeping
with rc6 at high clocks]. But as it turns out, not posting the writes
immediately also has unintended consequences, such as not reducing the
clocks and so conserving power while busy.
As a compromise, let us only arm the domain timer for automatic
forcewake usage around bare register access, but immediately release the
forcewake when manually acquired by intel_uncore_forcewake_get/_put.
The corollary to this is that we may instead have to take forcewake more
often, and so incur a latency penalty in doing so. For Sandybridge this
was significant, and even on the latest machines, taking forcewake at
interrupt frequency is a huge impact. [So we don't do that anymore!
Hopefully, this will spare us from still needing the mitigation of the
timer for steady state execution.]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601072446.19548-13-chris@chris-wilson.co.uk
Currently the plane property doesn't have support for YCBCR_BT2020,
which enables the corresponding color conversion mode on plane CSC.
Enabling the plane property for the planes for GLK & ICL+ platforms.
Also as per spec, update the Plane Color CSC from YUV601_TO_RGB709
to YUV601_TO_RGB601.
V2: Enabling support for YCBCT_BT2020 for HDR planes on
platforms GLK & ICL
V3: Refined the condition check to handle GLK & ICL+ HDR planes
Also added BT2020 handling in glk_plane_color_ctl.
V4: Combine If-else into single If
V5: Drop the checking for HDR planes and enable YCBCR_BT2020
for platforms GLK & ICL+.
V6: As per Spec, update PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709
to PLANE_COLOR_CSC_MODE_YUV601_TO_RGB601 as per Ville's
feedback.
V7: Rebased
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601073544.11291-1-kishore.kadiyala@intel.com
If we declare that an object type is shrinkable (any that we can reclaim
to recover system pages), make sure we taint the object mutex so that
lockdep expects us to use it within fs_reclaim. lockdep will then
complain the first time we try to allocate while holding the plain
mutex, as doing so invites potential recursion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200529183204.16850-1-chris@chris-wilson.co.uk
With the advent of preempt-to-busy, a request may still be on the GPU as
we unwind. And in the case of a unpreemptible [due to HW] request, that
request will remain indefinitely on the GPU even though we have
returned it back to our submission queue, and cleared the active bit.
We only run the execution callbacks on transferring the request from our
submission queue to the execution queue, but if this is a bonded request
that the HW is waiting for, we will not submit it (as we wait for a
fresh execution) even though it is still being executed.
As we know that there are always preemption points between requests, we
know that only the currently executing request may be still active even
though we have cleared the flag. However, we do not precisely know which
request is in ELSP[0] due to a delay in processing events, and
furthermore we only store the last request in a context in our state
tracker.
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Testcase: igt/gem_exec_balancer/bonded-dual
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200529143926.3245-1-chris@chris-wilson.co.uk
There's no reason for I915_MODE_FLAG_INHERITED to exist as a flag
anymore. Just make it a boolean.
v2: Deal with sanitize_watermarks()
CC: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429103936.11850-1-ville.syrjala@linux.intel.com
Replace the use of mode->private_flags with a truly private bitmaks
in our own crtc state. We also need a copy in the crtc itself so the
vblank code can get at it. We already have scanline_offset in there
for a similar reason, as well as the vblank->hwmode which is assigned
via drm_calc_timestamping_constants(). Fortunately we now have a
nice place for doing the crtc_state->crtc copy in
intel_crtc_update_active_timings() which gets called both for
modesets and init/resume readout.
The one slightly iffy spot is the INHERITED flag which we want to
preserve until userspace/fb_helper does the first proper commit after
actually calling .detecti() on the connectors. Otherwise we don't have
the full sink capabilities (audio,infoframes,etc.) when .compute_config()
gets called and thus we will fail to enable those features when the
first userspace commit happens. The only internal commit we do prior to
that should be from intel_initial_commit() and there we can simply
preserve the INHERITED flag from the readout.
v2: Deal with INHERITED in sanitize_watermarks() as well
CC: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429103904.11727-1-ville.syrjala@linux.intel.com
We may choose to only submit ELSP[0], even though we have sufficient
requests to fill the whole ELSP. Normally, we only start timeslicing if
we fill more than one port, but in this case we need to start
timeslicing for the queue that we choose not to submit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200528205727.20309-1-chris@chris-wilson.co.uk
If the ring submission is stalled on an external request, nothing can be
submitted, not even the heartbeat in the kernel context. Since nothing
is running, resetting the engine/device does not unblock the system and
is pointless. We can see if the heartbeat is supposed to be running
before declaring foul.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200528074109.28235-2-chris@chris-wilson.co.uk
Across suspend/resume, we clear the entire GGTT and rebuild from
scratch. In particular, we want to only preserve the global entries for
use by the HW, and delay reinstating the local binds until required by
the user. This means that we can evict any local binds in the global GTT,
saving any time in preserving their state, as they will be rebound on
demand.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1947
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200528082427.21402-2-chris@chris-wilson.co.uk
We should be able to skip restoring LOCAL (user) binds within the GGTT on
resume and let them be restored upon demand. However, our consistency
checks demand that the bind flags match the node state, and we cannot
simply clear the flags, we need to evict as well. For now, make sure we
restore the bind flags exactly upon resume.
Fixes: 0109a16ef3 ("drm/i915/gt: Clear LOCAL_BIND from shared GGTT on resume")
Fixes: bf0840cdb3 ("drm/i915/gt: Stop cross-polluting PIN_GLOBAL with PIN_USER with no-ppgtt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200528150452.7880-1-chris@chris-wilson.co.uk
We have a I915_REQUEST_NOPREEMPT flag that we set when we must prevent
the HW from preempting during the course of this request. We need to
honour this flag and protect the HW even if we have a heartbeat request,
or other maximum priority barrier, pending. As such, restrict the
timeslicing check to avoid preempting into the topmost priority band,
leaving the unpreemptable requests in blissful peace running
uninterrupted on the HW.
v2: Set the I915_PRIORITY_BARRIER to be less than
I915_PRIORITY_UNPREEMPTABLE so that we never submit a request
(heartbeat or barrier) that can legitimately preempt the current
non-premptable request.
Fixes: 2a98f4e65b ("drm/i915: add infrastructure to hold off preemption on a request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527162418.24755-1-chris@chris-wilson.co.uk
gcc-9 gets confused by the code flow in check_dirty_whitelist:
drivers/gpu/drm/i915/gt/selftest_workarounds.c: In function 'check_dirty_whitelist':
drivers/gpu/drm/i915/gt/selftest_workarounds.c:492:17: error: 'rsvd' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I could not figure out a good way to do this in a way that gcc
understands better, so initialize the variable to zero, as last
resort.
Fixes: aee20aaed8 ("drm/i915: Implement read-only support in whitelist selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-2-arnd@arndb.de
Conditional spinlocks make it hard for gcc and for lockdep to
follow the code flow. This one causes a warning with at least
gcc-9 and higher:
In file included from include/linux/irq.h:14,
from drivers/gpu/drm/i915/i915_pmu.c:7:
drivers/gpu/drm/i915/i915_pmu.c: In function 'i915_sample':
include/linux/spinlock.h:289:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized]
289 | _raw_spin_unlock_irqrestore(lock, flags); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/i915_pmu.c:288:17: note: 'flags' was declared here
288 | unsigned long flags;
| ^~~~~
Split out the part between the locks into a separate function
for readability and to let the compiler figure out what the
logic actually is.
Fixes: d79e1bd676 ("drm/i915/pmu: Only use exclusive mmio access for gen7")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527140526.1458215-1-arnd@arndb.de
We only restore GLOBAL binds upon resume as we expect these to be pinned
for use by HW, whereas the LOCAL binds can be recreated on demand once
userspace is resumed. For the LOCAL bind to be recreated in the global
GTT (for old systems without ppgtt), we need to clear its presence flag
on deciding not to restore the mapping upon resume.
Fixes: bf0840cdb3 ("drm/i915/gt: Stop cross-polluting PIN_GLOBAL with PIN_USER with no-ppgtt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526150739.26147-1-chris@chris-wilson.co.uk
When we push a virtual request onto the HW, we update the rq->engine to
point to the physical engine. A request that is then submitted by the
user that waits upon the virtual engine, but along the physical engine
in use, will then see that it is due to be submitted to the same engine
and take a shortcut (and be queued without waiting for the completion
fence). However, the virtual request may be preempted (either by higher
priority users, or by timeslicing) and removed from the physical engine
to be migrated over to one of its siblings. The dependent normal request
however is oblivious to the removal of the virtual request and remains
queued to execute on HW, believing that once it reaches the head of its
queue all of its predecessors will have completed executing!
v2: Beware restriction of signal->execution_mask prior to submission.
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Testcase: igt/gem_exec_balancer/sliced
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526090753.11329-2-chris@chris-wilson.co.uk
Reduce the irq_work llist for attaching the callbacks to the signal for
both smaller structs (two fewer pointers!) and simpler [debug] code:
Function old new delta
irq_execute_cb 35 34 -1
__igt_breadcrumbs_smoketest 1684 1682 -2
i915_request_retire 2003 1996 -7
__i915_request_create 1047 1040 -7
__notify_execute_cb 135 126 -9
__i915_request_ctor 188 178 -10
__await_execution.part.constprop 451 440 -11
igt_wait_request 924 714 -210
One minor artifact is that the order of cb exection is reversed. No
current use cases are affected by that change.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526112051.10229-1-chris@chris-wilson.co.uk
If there are no internal levels and the user priority-shift is zero, we
can help the compiler eliminate some dead code:
Function old new delta
start_timeslice 169 154 -15
__execlists_submission_tasklet 4696 4659 -37
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525075347.582-4-chris@chris-wilson.co.uk
Before we return control to the system, and letting it reuse all the
pages being accessed by HW, we must disable the HW. At the moment, we
dare not reset the GPU if it will clobber the display, but once we know
the display has been disabled, we can proceed with the reset as we
shutdown the module. We know the next user must reinitialise the HW for
their purpose.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/489
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525151459.12083-1-chris@chris-wilson.co.uk
drivers/gpu/drm/i915/display/intel_dsb.c:177 intel_dsb_reg_write() warn: variable dereferenced before check 'dsb' (see line 175)
Fixes: afeda4f3b1 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200524233900.25598-1-chris@chris-wilson.co.uk
Since the worker may rearm, we currently are only guaranteed to flush
the work if we cancel the timer. If the work was running at the time we
try and cancel it, we will wait for it to complete, but it may leave
items in the pool and requeue the work. If we rearrange the immediate
discard of the pool then cancel the work, we know that the work cannot
rearm and so our flush will be final.
<0> [314.146044] i915_mod-1321 2.... 299799443us : intel_gt_fini_buffer_pool: intel_gt_fini_buffer_pool:227 GEM_BUG_ON(!list_empty(&pool->cache_list[n]))
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1920
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525141957.3061-1-chris@chris-wilson.co.uk
Pre-allocate command buffer in atomic_commit using intel_dsb_prepare
function which also includes pinning and map in cpu domain.
No functional change is dsb write/commit functions.
Now dsb get/put function is removed and ref-count mechanism is
not needed. Below dsb api added to do respective job mentioned
below.
intel_dsb_prepare - Allocate, pin and map the buffer.
intel_dsb_cleanup - Unpin and release the gem object.
RFC: Initial patch for design review.
v2: included _init() part in _prepare(). [Daniel, Ville]
v3: dsb_cleanup called after cleanup_planes. [Daniel]
v4: dsb structure is moved to intel_crtc_state from intel_crtc. [Maarten]
v5: dsb get/put/ref-count mechanism removed. [Maarten]
v6: Based on review feedback following changes are added,
- replaced intel_dsb structure by pointer in intel_crtc_state. [Maarten]
- passing intel_crtc_state to dsp-api to simplify the code. [Maarten]
- few dsb functions prototype modified to simplify code.
v7: added few cosmetic changes suggested by Jani and null check for
crtc_state in dsb_cleanup removed as suggested by Maarten.
v8: changed the function parameter to intel_crtc_state* of
ivb_load_lut_ext_max() from intel_crtc. [Maarten]
v9: error handling improved in _write() and prepare(). [Maarten]
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520130737.11240-1-animesh.manna@intel.com
Removed duplicate include and fixed comment > 80 chars.
v2: Added newline after system include and between functions
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522131843.20477-1-stanislav.lisovskiy@intel.com
This is a permanent w/a for JSL/EHL.This is to be applied to the
PCH types on JSL/EHL ie JSP/MCC
Bspec: 52888
v2: Fixed the wrong usage of logical OR(ville)
v3: Removed extra braces, changed the check(jose)
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521064448.29522-1-swathi.dhanavanthri@intel.com
