If the driver module is loaded when FPGA is configured, the FPGA
is reset because nconfig is pulled low (low-active gpio inited
with GPIOD_OUT_HIGH activates the signal which means setting its
value to low). Init nconfig with GPIOD_OUT_LOW to prevent this.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the Altera PCI Vendor id to pci_ids.h and remove the private
definitions from xillybus_pcie.c and altera-cvp.c.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Eli Billauer <eli.billauer@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If fpga_mgr_register() fails, a clock is left undisabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both fpga_region_get_manager() and fpga_region_get_bridges() call
of_parse_phandle(), but nothing calls of_node_put() on the returned
struct device_node pointers. Make sure to do that to stop their
reference counters getting out of whack.
Fixes: 0fa20cdfcc ("fpga: fpga-region: device tree control for FPGA")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Notice that bridge = to_fpga_bridge(dev); expands to:
bridge = container_of(dev, struct fpga_bridge, dev);
and container_of is never null, so this null check is
unnecessary.
Addresses-Coverity-ID: 1397912
Reported-by: Alan Tull <atull@kernel.org>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Notice that mgr = to_fpga_manager(dev); expands to:
mgr = container_of(dev, struct fpga_manager, dev);
and container_of is never null, so this null check is
unnecessary.
Addresses-Coverity-ID: 1397916
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make it easy to add attributes to low level FPGA drivers the right
way. Add attribute groups pointers to structures that are used when
registering a manager, bridge, or group. When the low level driver
registers, set the device attribute group. The attributes are
created in device_add.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fpga menuconfig has gotten messy. The bridges and managers are
mixed together.
* Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE
from the managers.
* Group the managers by vendor in order that they were added
to the kernel.
The following is what the menuconfig ends up looking like more or less
(platform dependencies are hiding some of these on any given
platform).
--- FPGA Configuration Framework
<*> Altera SOCFPGA FPGA Manager
<*> Altera SoCFPGA Arria10
<*> Altera Partial Reconfiguration IP Core
<*> Platform support of Altera Partial Reconfiguration IP Core
<*> Altera FPGA Passive Serial over SPI
<*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager
<*> Xilinx Zynq FPGA
<*> Xilinx Configuration over Slave Serial (SPI)
<*> Lattice iCE40 SPI
<*> Technologic Systems TS-73xx SBC FPGA Manager
<*> FPGA Bridge Framework
<*> Altera SoCFPGA FPGA Bridges
<*> Altera FPGA Freeze Bridge
<*> Xilinx LogiCORE PR Decoupler
<*> FPGA Region
<*> FPGA Region Device Tree Overlay Support
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FPGA may already have a static image programmed when
Linux boots. In that case a DT overlay may be used to add
the devices that already exist. This commit allows that
by shuffling the order of some checks.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create of-fpga-region.c and move the following functions without
modification from fpga-region.c.
* of_fpga_region_find
* of_fpga_region_get_mgr
* of_fpga_region_get_bridges
* child_regions_with_firmware
* of_fpga_region_parse_ov
* of_fpga_region_notify_pre_apply
* of_fpga_region_notify_post_remove
* of_fpga_region_notify
* of_fpga_region_probe
* of_fpga_region_remove
Create two new functions with some code from fpga_region_init/exit.
* of_fpga_region_init
* of_fpga_region_exit
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a function for searching the fpga-region class. This
will be useful when device tree code is no longer in the
same file that declares the fpga-region class. Another
step in separating common FPGA region code from device
tree support.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another step in separating common code from device tree specific
code for FPGA regions.
* add FPGA region register/unregister functions.
* add the register/unregister functions to the header
* use devm_kzalloc to alloc the region.
* add a method for getting bridges to the region struct
* add priv to the region struct
* use region->info in of_fpga_region_get_bridges
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename some functions that will be moved to
of-fpga-region.c. Also change some parameters
and export a function to help with refactoring.
This is a step towards the larger goal of separating
device tree support from FPGA region common code.
* fpga_region_get_manager -> of_fpga_region_get_mgr
* add 'of_' prefix to the following:
* fpga_region_find
* fpga_region_get_bridges
* fpga_region_notify_pre_apply
* fpga_region_notify_post_remove),
* fpga_region_probe/remove
Parameter changes:
* of_fpga_region_find
change parameter to be the device node of the region.
* of_fpga_region_get_bridges
change second parameter to FPGA image info.
Export of_fpga_region_find as well.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Create fpga-region.h.
* Export fpga_region_program_fpga.
* Move struct fpga_region and other things to the header.
This is a step in separating FPGA region common code
from Device Tree support.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New function of_fpga_region_parse_ov added, moving code
from fpga_region_notify_pre_apply. This function
gets the FPGA image info from the overlay and is able
to simplify some of the logic involved.
This is a baby step in refactoring the FPGA region code to
separate out common code from Device Tree overlay support.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FPGA image info (region->info) when region code is
programming the FPGA to pass in multiple parameters.
This is a baby step in refactoring the FPGA region code to
separate out common FPGA region code from FPGA region
Device Tree overlay support.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When DT overlays are applied, each FPGA region keeps track of the fpga
image info as region->info. This pointer is assigned only if an
overlay causes the FPGA to be programmed. As it stands, this pointer
can be overwritten, causing a slow warning later when overlays are
removed.
This patch fixes this by changing the allowed behaviour. If a region
has received an overlay that programmed the FPGA, reject other
overlays that try to program the FPGA. To reprogram the FPGA, first
remove the overlay. This makes sense as removing the overlay also
removes the devices cleanly. Note that overlays that make DT changes
without reprogramming the FPGA are exempt from this restriction.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During a device tree overlay pre-apply notification, the check
for child FPGA regions can happen slightly earlier. This saves
us from allocating the FPGA image info that just gets thrown
away.
This is a baby step in refactoring the FPGA region code to
separate out common FPGA region code from FPGA region
Device Tree overlay support.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get the FPGA manager during region creation.
This is a baby step in refactoring the FPGA region code to
separate out common FPGA region code from FPGA region
Device Tree overlay support.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove of_node_get/put in fpga_region_get/put. Not
needed and will get in the way when I separate out
the common FPGA region code from Device Tree support
code.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dev_err messages instead of pr_err.
Also s/®ion->dev/dev/ in two places where we already
have dev = ®ion->dev.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously when the user gets a FPGA manager, it was locked
and nobody else could use it for programming.
This commit makes it straightforward to save a reference to an
FPGA manager and only lock it when programming the FPGA.
Add functions that get an FPGA manager's mutex for exclusive use:
* fpga_mgr_lock
* fpga_mgr_unlock
The following functions no longer lock an FPGA manager's mutex:
* of_fpga_mgr_get
* fpga_mgr_get
* fpga_mgr_put
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fpga-mgr has three methods for programming FPGAs, depending on
whether the image is in a scatter gather list, a contiguous
buffer, or a firmware file. This makes it difficult to write
upper layers as the caller has to assume whether the FPGA image
is in a sg table, as a single buffer, or a firmware file.
This commit moves these parameters to struct fpga_image_info
and adds a single function for programming fpgas.
New functions:
* fpga_mgr_load - given fpga manager and struct fpga_image_info,
program the fpga.
* fpga_image_info_alloc - alloc a struct fpga_image_info.
* fpga_image_info_free - free a struct fpga_image_info.
These three functions are unexported:
* fpga_mgr_buf_load_sg
* fpga_mgr_buf_load
* fpga_mgr_firmware_load
Also use devm_kstrdup to copy firmware_name so we aren't making
assumptions about where it comes from when allocing/freeing the
struct fpga_image_info.
API documentation has been updated and a new document for
FPGA region has been added.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add two functions for getting the FPGA bridge from the device
rather than device tree node. This is to enable writing code
that will support using FPGA bridges without device tree.
Rename one old function to make it clear that it is device
tree-ish. This leaves us with 3 functions for getting a bridge:
* fpga_bridge_get
Get the bridge given the device.
* fpga_bridges_get_to_list
Given the device, get the bridge and add it to a list.
* of_fpga_bridges_get_to_list
Renamed from priviously existing fpga_bridges_get_to_list.
Given the device node, get the bridge and add it to a list.
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of char/misc and other driver subsystem patches for
4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
Note, there will be a merge conflict in drivers/misc/lkdtm_core.c when
merging to your tree as one lkdtm patch came in through the perf tree as
well as this one. The resolution is to take the const change that this
tree provides.
All of these have been in linux-next for quite a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2Lnw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymTUwCgwp46+I8yPlgDH8oe5TxyyJnpdHQAn1XW0i+a
sBi6WS87In5v1QO1Rgfc
=dH2a
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem patches
for 4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
VME: Return -EBUSY when DMA list in use
w1: keep balance of mutex locks and refcnts
MAINTAINERS: Update VME subsystem tree.
nvmem: sunxi-sid: add support for A64/H5's SID controller
nvmem: imx-ocotp: Update module description
nvmem: imx-ocotp: Enable i.MX7D OTP write support
nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
nvmem: imx-ocotp: Add support for banked OTP addressing
nvmem: imx-ocotp: Pass parameters via a struct
nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
nvmem: uniphier: add UniPhier eFuse driver
dt-bindings: nvmem: add description for UniPhier eFuse
nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
nvmem: qfprom: fix different address space warnings of sparse
nvmem: mtk-efuse: fix different address space warnings of sparse
nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
thunderbolt: tb: fix use after free in tb_activate_pcie_devices
MAINTAINERS: Add git tree for Thunderbolt development
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make this const as it is only passed to a const argument of the function
fpga_bridge_register.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's better to be explicit and use the DRIVER_ATTR_RW() macro when
defining a driver's sysfs file.
This is part of a series to drop DRIVER_ATTR() from the tree entirely.
Cc: linux-fpga@vger.kernel.org
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The global spinlock `l3_remap_lock` is reinitialized every time the
"probe" function `alt_fpga_bridge_probe()` is called. It should only be
initialized once. Use `DEFINE_SPINLOCK()` to initialize it statically.
Fixes: e5f8efa5c8 ("ARM: socfpga: fpga bridge driver support")
Cc: <stable@vger.kernel.org> # 4.10+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-By: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check return value from call to of_match_device()
in order to prevent a NULL pointer dereference.
In case of NULL print error message and return -ENODEV
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a53e35db70 ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.
No functional changes.
Cc: Alan Tull <atull@kernel.org>
Cc: Moritz Fischer <moritz.fischer@ettus.com>
Cc: linux-fpga@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-By: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alan Tull <atull@kernel.org>
Cc: Moritz Fischer <moritz.fischer@ettus.com>
Cc: linux-fpga@vger.kernel.org
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Speed up bit reversal by using hardware bit reversal
Add extra code to handle less than 4byte remnants, if any
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
altera-ps-spi loads FPGA firmware over SPI, using the "passive serial"
interface on Altera Arria 10, Cyclone V or Stratix V FPGAs.
This is one of the simpler ways to set up an FPGA at runtime.
The signal interface is close to unidirectional SPI with lsb first.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to get into the submenu to disable all FPGA-related config entries
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value in the version register of the altera freeze bridge
controller changed from the beta value of 2 to the
value of 0xad000003 in the official release of the IP.
This patch supports the old and new version numbers, and the
driver's probe function will fail if neither of the supported
versions is found.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If fpga_region_get_manager() fails in fpga_region_program_fpga(), a
reference to the fpga_manager instance previously acquired through
fpga_region_get() is retained. Make sure to properly release it in the
error case by using a separate jump label which will call
fpga_region_put() in before returning.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If either _alt_hps2fpga_enable_set() or fpga_bridge_register() fail in
alt_fpga_bridge_probe(), the clock remains enabled and prepared. Also,
in the error path for _alt_hps2fpga_enable_set() a call to
fpga_bridge_unregister() is made even though the bridge was not
registered yet.
Remove the unnecessary call to fpga_bridge_unregister() and call
clk_disable_unprepare() in both error paths in order to make sure the
clock gets properly disabled and unprepared.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support for the Xilinx LogiCORE PR Decoupler
soft-ip that does decoupling of PR regions in the FPGA
fabric during partial reconfiguration.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a platform bus driver for a fpga-mgr driver
that uses the Altera Partial Reconfiguration IP component.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding the core functions necessary for a fpga-mgr driver
for the Altera Partial IP component. It is intended for
these functions to be used by the various bus implementations
like the platform bus or the PCIe bus.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding timeout for maximum allowed time for FPGA to go to
operating mode after a FPGA region has been programmed.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver loads FPGA firmware over SPI, using the "slave serial"
configuration interface on Xilinx FPGAs.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ops are not changing, make them const.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Alan Tull <atull@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fpga@vger.kernel.org
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support to the FPGA manager for configuring the SRAM of
iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40
UltraPlus devices, through slave SPI.
Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for loading bitstreams on the Altera Cyclone II FPGA
populated on the TS-7300 board. This is done through the configuration
and data registers offered through a memory interface between the EP93xx
SoC and the FPGA via an intermediate CPLD device.
The EP93xx SoC on the TS-7300 does not have direct means of configuring
the on-board FPGA other than by using the special memory mapped
interface to the CPLD. No other entity on the system can control the
FPGA bitstream.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add fpga-region property to allow passing the fact that the bitstream is
encrypted to the fpga-region and ultimately to the low-level driver.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
