- Have reading of event format files test if the meta data still exists.
When a event is freed, a flag (EVENT_FILE_FL_FREED) in the meta data is
set to state that it is to prevent any new references to it from happening
while waiting for existing references to close. When the last reference
closes, the meta data is freed. But the "format" was missing a check to
this flag (along with some other files) that allowed new references to
happen, and a use-after-free bug to occur.
- Have the trace event meta data use the refcount infrastructure instead
of relying on its own atomic counters.
- Have tracefs inodes use alloc_inode_sb() for allocation instead of
using kmem_cache_alloc() directly.
- Have eventfs_create_dir() return an ERR_PTR instead of NULL as
the callers expect a real object or an ERR_PTR.
- Have release_ei() use call_srcu() and not call_rcu() as all the
protection is on SRCU and not RCU.
- Fix ftrace_graph_ret_addr() to use the task passed in and not current.
- Fix overflow bug in get_free_elt() where the counter can overflow
the integer and cause an infinite loop.
- Remove unused function ring_buffer_nr_pages()
- Have tracefs freeing use the inode RCU infrastructure instead of
creating its own. When the kernel had randomize structure fields
enabled, the rcu field of the tracefs_inode was overlapping the
rcu field of the inode structure, and corrupting it. Instead,
use the destroy_inode() callback to do the initial cleanup of
the code, and then have free_inode() free it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZrTvXxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qu39AP9ze6ELpShDrxbXhf0adbNqG2IXMepa
MMLqfq8tU8E/vAEAuZXJ6rKXeGvKeONa06ocvWJ0dpb2cy/n4hmx+KtM5gI=
=Pkh4
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have reading of event format files test if the metadata still exists.
When a event is freed, a flag (EVENT_FILE_FL_FREED) in the metadata
is set to state that it is to prevent any new references to it from
happening while waiting for existing references to close. When the
last reference closes, the metadata is freed. But the "format" was
missing a check to this flag (along with some other files) that
allowed new references to happen, and a use-after-free bug to occur.
- Have the trace event meta data use the refcount infrastructure
instead of relying on its own atomic counters.
- Have tracefs inodes use alloc_inode_sb() for allocation instead of
using kmem_cache_alloc() directly.
- Have eventfs_create_dir() return an ERR_PTR instead of NULL as the
callers expect a real object or an ERR_PTR.
- Have release_ei() use call_srcu() and not call_rcu() as all the
protection is on SRCU and not RCU.
- Fix ftrace_graph_ret_addr() to use the task passed in and not
current.
- Fix overflow bug in get_free_elt() where the counter can overflow the
integer and cause an infinite loop.
- Remove unused function ring_buffer_nr_pages()
- Have tracefs freeing use the inode RCU infrastructure instead of
creating its own.
When the kernel had randomize structure fields enabled, the rcu field
of the tracefs_inode was overlapping the rcu field of the inode
structure, and corrupting it. Instead, use the destroy_inode()
callback to do the initial cleanup of the code, and then have
free_inode() free it.
* tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracefs: Use generic inode RCU for synchronizing freeing
ring-buffer: Remove unused function ring_buffer_nr_pages()
tracing: Fix overflow in get_free_elt()
function_graph: Fix the ret_stack used by ftrace_graph_ret_addr()
eventfs: Use SRCU for freeing eventfs_inodes
eventfs: Don't return NULL in eventfs_create_dir()
tracefs: Fix inode allocation
tracing: Use refcount for trace_event_file reference counter
tracing: Have format file honor EVENT_FILE_FL_FREED
Assorted little stuff:
- lockdep fixup for lockdep_set_notrack_class()
- we can now remove a device when using erasure coding without
deadlocking, though we still hit other issues
- the "allocator stuck" timeout is now configurable, and messages are
ratelimited; default timeout has been increased from 10 seconds to 30
-----BEGIN PGP SIGNATURE-----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=q1dD
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Assorted little stuff:
- lockdep fixup for lockdep_set_notrack_class()
- we can now remove a device when using erasure coding without
deadlocking, though we still hit other issues
- the 'allocator stuck' timeout is now configurable, and messages are
ratelimited. The default timeout has been increased from 10 seconds
to 30"
* tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs:
bcachefs: Use bch2_wait_on_allocator() in btree node alloc path
bcachefs: Make allocator stuck timeout configurable, ratelimit messages
bcachefs: Add missing path_traverse() to btree_iter_next_node()
bcachefs: ec should not allocate from ro devs
bcachefs: Improved allocator debugging for ec
bcachefs: Add missing bch2_trans_begin() call
bcachefs: Add a comment for bucket helper types
bcachefs: Don't rely on implicit unsigned -> signed integer conversion
lockdep: Fix lockdep_set_notrack_class() for CONFIG_LOCK_STAT
bcachefs: Fix double free of ca->buckets_nouse
Limit these messages to once every 2 minutes to avoid spamming logs;
with multiple devices the output can be quite significant.
Also, up the default timeout to 30 seconds from 10 seconds.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug exposed by the next path - we pop an assert in
path_set_should_be_locked().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
To mirror the SRCU lock held in eventfs_iterate() when iterating over
eventfs inodes, use call_srcu() to free them too.
This was accidentally(?) degraded to RCU in commit 43aa6f97c2
("eventfs: Get rid of dentry pointers without refcounts").
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20240723210755.8970-1-minipli@grsecurity.net
Fixes: 43aa6f97c2 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 77a06c33a2 ("eventfs: Test for ei->is_freed when accessing
ei->dentry") added another check, testing if the parent was freed after
we released the mutex. If so, the function returns NULL. However, all
callers expect it to either return a valid pointer or an error pointer,
at least since commit 5264a2f4bb ("tracing: Fix a NULL vs IS_ERR() bug
in event_subsystem_dir()"). Returning NULL will therefore fail the error
condition check in the caller.
Fix this by substituting the NULL return value with a fitting error
pointer.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Fixes: 77a06c33a2 ("eventfs: Test for ei->is_freed when accessing ei->dentry")
Link: https://lore.kernel.org/20240723122522.2724-1-minipli@grsecurity.net
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The leading comment above alloc_inode_sb() is pretty explicit about it:
/*
* This must be used for allocating filesystems specific inodes to set
* up the inode reclaim context correctly.
*/
Switch tracefs over to alloc_inode_sb() to make sure inodes are properly
linked.
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20240807115143.45927-2-minipli@grsecurity.net
Fixes: ba37ff75e0 ("eventfs: Implement tracefs_inode_cache")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=03Gf
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix double inode unlock for direct IO sync writes (reported by
syzbot)
- fix root tree id/name map definitions, don't use fixed size buffers
for name (reported by -Werror=unterminated-string-initialization)
- fix qgroup reserve leaks in bufferd write path
- update scrub status structure more often so it can be reported in
user space more accurately and let 'resume' not repeat work
- in preparation to remove space cache v1 in the future print a warning
if it's detected
* tag 'for-6.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid using fixed char array size for tree names
btrfs: fix double inode unlock for direct IO sync writes
btrfs: emit a warning about space cache v1 being deprecated
btrfs: fix qgroup reserve leaks in cow_file_range
btrfs: implement launder_folio for clearing dirty page reserve
btrfs: scrub: update last_physical after scrubbing one stripe
btrfs: factor out stripe length calculation into a helper
We've had bugs in the past with incorrect integer conversions in disk
accounting code, which is why bucket helpers now always return s64s; add
a comment explaining this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
implicit integer conversion is a fertile source of bugs, and we really
would rather not have the min()/max() macros doing it implicitly.
bcachefs appears to be the only place in the kernel where this happens,
so let's fix it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-----BEGIN PGP SIGNATURE-----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=MKOr
-----END PGP SIGNATURE-----
Merge tag '6.11-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- two reparse point fixes
- minor cleanup
- additional trace point (to help debug a recent problem)
* tag '6.11-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
smb: client: fix FSCTL_GET_REPARSE_POINT against NetApp
smb3: add dynamic tracepoints for shutdown ioctl
cifs: Remove cifs_aio_ctx
smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
* Fix memory leak when corruption is detected during scrubbing parent
pointers.
* Allow SECURE namespace xattrs to use reserved block pool to in order to
prevent ENOSPC.
* Save stack space by passing tracepoint's char array to file_path() instead
of another stack variable.
* Remove unused parameter in macro XFS_DQUOT_LOGRES.
* Replace comma with semicolon in a couple of places.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZqoucAAKCRAH7y4RirJu
9LlvAP9J85bGKmcBcy0SLbuqatg6aut/ev/7+qI0FHdaRp1mYQEA+ryJarLdl8kM
8EqMUwDF3CzK3o88hrTMu6lT5F6Mpw4=
=CCxD
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix memory leak when corruption is detected during scrubbing parent
pointers
- Allow SECURE namespace xattrs to use reserved block pool to in order
to prevent ENOSPC
- Save stack space by passing tracepoint's char array to file_path()
instead of another stack variable
- Remove unused parameter in macro XFS_DQUOT_LOGRES
- Replace comma with semicolon in a couple of places
* tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: convert comma to semicolon
xfs: convert comma to semicolon
xfs: remove unused parameter in macro XFS_DQUOT_LOGRES
xfs: fix file_path handling in tracepoints
xfs: allow SECURE namespace xattrs to use reserved block pool
xfs: fix a memory leak
[BUG]
There is a bug report that using the latest trunk GCC 15, btrfs would cause
unterminated-string-initialization warning:
linux-6.6/fs/btrfs/print-tree.c:29:49: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
29 | { BTRFS_BLOCK_GROUP_TREE_OBJECTID, "BLOCK_GROUP_TREE" },
|
^~~~~~~~~~~~~~~~~~
[CAUSE]
To print tree names we have an array of root_name_map structure, which
uses "char name[16];" to store the name string of a tree.
But the following trees have names exactly at 16 chars length:
- "BLOCK_GROUP_TREE"
- "RAID_STRIPE_TREE"
This means we will have no space for the terminating '\0', and can lead
to unexpected access when printing the name.
[FIX]
Instead of "char name[16];" use "const char *" instead.
Since the name strings are all read-only data, and are all NULL
terminated by default, there is not much need to bother the length at
all.
Reported-by: Sam James <sam@gentoo.org>
Reported-by: Alejandro Colomar <alx@kernel.org>
Fixes: edde81f1ab ("btrfs: add raid stripe tree pretty printer")
Fixes: 9c54e80ddc ("btrfs: add code to support the block group root")
CC: stable@vger.kernel.org # 6.1+
Suggested-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we do a direct IO sync write, at btrfs_sync_file(), and we need to skip
inode logging or we get an error starting a transaction or an error when
flushing delalloc, we end up unlocking the inode when we shouldn't under
the 'out_release_extents' label, and then unlock it again at
btrfs_direct_write().
Fix that by checking if we have to skip inode unlocking under that label.
Reported-by: syzbot+7dbbb74af6291b5a5a8b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000dfd631061eaeb4bc@google.com/
Fixes: 939b656bc8 ("btrfs: fix corruption after buffer fault in during direct IO append write")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
the client releasing the caps in question, marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmatDEgTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzixHdB/9k62+n/hLFTXem1WE421sg6oAwCNA+
KCps+TU4ekeo7ckvExeO1MwL5SyRMUc05nY9zHDiqey0hkpuUsZfjvj9v/q0XHDh
YcGLfIe9gTl2QiAeEjl6FRkJas5GA/MULjEKltEFUpRTCH9WQvS2z5/MzJByUobf
kHtEokAViEB+OpIabN3Vm4ZcQJ5ZLdbmVzlvf3nRYZ1Yw+OinQn3yVQJ2VKYXiOi
l9rk9XxUSISV7EKUq9N0qlSH7M1YsspMTM1lSIC1vlaILyeTA1dJa/85ACEtXOfm
Z7mC77H6ivR2o+eXilgvpEAyCCDRfmwUp4GV1LnqFDZKBJsBAcwLyLGY
=I++X
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.11-rc2' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a potential hang in the MDS when cap revocation races with
the client releasing the caps in question, marked for stable"
* tag 'ceph-for-6.11-rc2' of https://github.com/ceph/ceph-client:
ceph: force sending a cap update msg back to MDS for revoke op
NetApp server requires the file to be open with FILE_READ_EA access in
order to support FSCTL_GET_REPARSE_POINT, otherwise it will return
STATUS_INVALID_DEVICE_REQUEST. It doesn't make any sense because
there's no requirement for FILE_READ_EA bit to be set nor
STATUS_INVALID_DEVICE_REQUEST being used for something other than
"unsupported reparse points" in MS-FSA.
To fix it and improve compatibility, set FILE_READ_EA & SYNCHRONIZE
bits to match what Windows client currently does.
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For debugging an umount failure in xfstests generic/043 generic/044 in some
configurations, we needed more information on the shutdown ioctl which
was suspected of being related to the cause, so tracepoints are added
in this patch e.g.
"trace-cmd record -e smb3_shutdown_enter -e smb3_shutdown_done -e smb3_shutdown_err"
Sample output:
godown-47084 [011] ..... 3313.756965: smb3_shutdown_enter: flags=0x1 tid=0x733b3e75
godown-47084 [011] ..... 3313.756968: smb3_shutdown_done: flags=0x1 tid=0x733b3e75
Tested-by: Anthony Nandaa (Microsoft) <profnandaa@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove struct cifs_aio_ctx and its associated alloc/release functions as it
is no longer used, the functions being taken over by netfslib.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
As per MS-FSA 2.1.5.10.14, support for FSCTL_GET_REPARSE_POINT is
optional and if the server doesn't support it,
STATUS_INVALID_DEVICE_REQUEST must be returned for the operation.
If we find files with reparse points and we can't read them due to
lack of client or server support, just ignore it and then treat them
as regular files or junctions.
Fixes: 5f71ebc412 ("smb: client: parse reparse point flag in create response")
Reported-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZqvoJgAKCRBZ7Krx/gZQ
6/QwAQD7oRzLm3Wg63EQIcbvhpZZlQvA7/FHVUVbIPE6+5ovWQEAsdHqyvyEXKMc
osLQJ5hAaYkfEgzjgy9kxR4f7tbdiwI=
=sbYX
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"do_dup2() out-of-bounds array speculation fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
protect the fetch of ->fd[fd] in do_dup2() from mispredictions
both callers have verified that fd is not greater than ->max_fds;
however, misprediction might end up with
tofree = fdt->fd[fd];
being speculatively executed. That's wrong for the same reasons
why it's wrong in close_fd()/file_close_fd_locked(); the same
solution applies - array_index_nospec(fd, fdt->max_fds) could differ
from fd only in case of speculative execution on mispredicted path.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We've been wanting to get rid of this for a while, add a message to
indicate that this feature is going away and when so we can finally have
a date when we're going to remove it. The output looks like this
BTRFS warning (device nvme0n1): space cache v1 is being deprecated and will be removed in a future release, please use -o space_cache=v2
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the buffered write path, the dirty page owns the qgroup reserve until
it creates an ordered_extent.
Therefore, any errors that occur before the ordered_extent is created
must free that reservation, or else the space is leaked. The fstest
generic/475 exercises various IO error paths, and is able to trigger
errors in cow_file_range where we fail to get to allocating the ordered
extent. Note that because we *do* clear delalloc, we are likely to
remove the inode from the delalloc list, so the inodes/pages to not have
invalidate/launder called on them in the commit abort path.
This results in failures at the unmount stage of the test that look like:
BTRFS: error (device dm-8 state EA) in cleanup_transaction:2018: errno=-5 IO failure
BTRFS: error (device dm-8 state EA) in btrfs_replace_file_extents:2416: errno=-5 IO failure
BTRFS warning (device dm-8 state EA): qgroup 0/5 has unreleased space, type 0 rsv 28672
------------[ cut here ]------------
WARNING: CPU: 3 PID: 22588 at fs/btrfs/disk-io.c:4333 close_ctree+0x222/0x4d0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c xor zstd_compress raid6_pq
CPU: 3 PID: 22588 Comm: umount Kdump: loaded Tainted: G W 6.10.0-rc7-gab56fde445b8 #21
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:close_ctree+0x222/0x4d0 [btrfs]
RSP: 0018:ffffb4465283be00 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffa1a1818e1000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffb4465283bbe0 RDI: ffffa1a19374fcb8
RBP: ffffa1a1818e13c0 R08: 0000000100028b16 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000003 R12: ffffa1a18ad7972c
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f9168312b80(0000) GS:ffffa1a4afcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91683c9140 CR3: 000000010acaa000 CR4: 00000000000006f0
Call Trace:
<TASK>
? close_ctree+0x222/0x4d0 [btrfs]
? __warn.cold+0x8e/0xea
? close_ctree+0x222/0x4d0 [btrfs]
? report_bug+0xff/0x140
? handle_bug+0x3b/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? close_ctree+0x222/0x4d0 [btrfs]
generic_shutdown_super+0x70/0x160
kill_anon_super+0x11/0x40
btrfs_kill_super+0x11/0x20 [btrfs]
deactivate_locked_super+0x2e/0xa0
cleanup_mnt+0xb5/0x150
task_work_run+0x57/0x80
syscall_exit_to_user_mode+0x121/0x130
do_syscall_64+0xab/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f916847a887
---[ end trace 0000000000000000 ]---
BTRFS error (device dm-8 state EA): qgroup reserved space leaked
Cases 2 and 3 in the out_reserve path both pertain to this type of leak
and must free the reserved qgroup data. Because it is already an error
path, I opted not to handle the possible errors in
btrfs_free_qgroup_data.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
In the buffered write path, dirty pages can be said to "own" the qgroup
reservation until they create an ordered_extent. It is possible for
there to be outstanding dirty pages when a transaction is aborted, in
which case there is no cancellation path for freeing this reservation
and it is leaked.
We do already walk the list of outstanding delalloc inodes in
btrfs_destroy_delalloc_inodes() and call invalidate_inode_pages2() on them.
This does *not* call btrfs_invalidate_folio(), as one might guess, but
rather calls launder_folio() and release_folio(). Since this is a
reservation associated with dirty pages only, rather than something
associated with the private bit (ordered_extent is cancelled separately
already in the cleanup transaction path), implementing this release
should be done via launder_folio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently sctx->stat.last_physical only got updated in the following
cases:
- When the last stripe of a non-RAID56 chunk is scrubbed
This implies a pitfall, if the last stripe is at the chunk boundary,
and we finished the scrub of the whole chunk, we won't update
last_physical at all until the next chunk.
- When a P/Q stripe of a RAID56 chunk is scrubbed
This leads the following two problems:
- sctx->stat.last_physical is not updated for a almost full chunk
This is especially bad, affecting scrub resume, as the resume would
start from last_physical, causing unnecessary re-scrub.
- "btrfs scrub status" will not report any progress for a long time
Fix the problem by properly updating @last_physical after each stripe is
scrubbed.
And since we're here, for the sake of consistency, use spin lock to
protect the update of @last_physical, just like all the remaining
call sites touching sctx->stat.
Reported-by: Michel Palleau <michel.palleau@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAMFk-+igFTv2E8svg=cQ6o3e6CrR5QwgQ3Ok9EyRaEvvthpqCQ@mail.gmail.com/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there are two locations which need to calculate the real
length of a stripe (which can be at the end of a chunk, and the chunk
size may not always be 64K aligned).
Factor them into a helper as we're going to have a third user soon.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a client sends out a cap update dropping caps with the prior 'seq'
just before an incoming cap revoke request, then the client may drop
the revoke because it believes it's already released the requested
capabilities.
This causes the MDS to wait indefinitely for the client to respond
to the revoke. It's therefore always a good idea to ack the cap
revoke request with the bumped up 'seq'.
Currently if the cap->issued equals to the newcaps the check_caps()
will do nothing, we should force flush the caps.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61782
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=JdOX
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix regression in extent map rework when handling insertion of
overlapping compressed extent
- fix unexpected file length when appending to a file using direct io
and buffer not faulted in
- in zoned mode, fix accounting of unusable space when flipping
read-only block group back to read-write
- fix page locking when COWing an inline range, assertion failure found
by syzbot
- fix calculation of space info in debugging print
- tree-checker, add validation of data reference item
- fix a few -Wmaybe-uninitialized build warnings
* tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry()
btrfs: fix corruption after buffer fault in during direct IO append write
btrfs: zoned: fix zone_unusable accounting on making block group read-write again
btrfs: do not subtract delalloc from avail bytes
btrfs: make cow_file_range_inline() honor locked_page on error
btrfs: fix corrupt read due to bad offset of a compressed extent map
btrfs: tree-checker: validate dref root and objectid
Some arch + compiler combinations report a potentially unused variable
location in btrfs_lookup_dentry(). This is a false alert as the variable
is passed by value and always valid or there's an error. The compilers
cannot probably reason about that although btrfs_inode_by_name() is in
the same file.
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5603:9
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5674:5
m68k-gcc8/m68k-allmodconfig
mips-gcc8/mips-allmodconfig
powerpc-gcc5/powerpc-all{mod,yes}config
powerpc-gcc5/ppc64_defconfig
Initialize it to zero, this should fix the warnings and won't change the
behaviour as btrfs_inode_by_name() accepts only a root or inode item
types, otherwise returns an error.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-btrfs/bd4e9928-17b3-9257-8ba7-6b7f9bbb639a@linux-m68k.org/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During an append (O_APPEND write flag) direct IO write if the input buffer
was not previously faulted in, we can corrupt the file in a way that the
final size is unexpected and it includes an unexpected hole.
The problem happens like this:
1) We have an empty file, with size 0, for example;
2) We do an O_APPEND direct IO with a length of 4096 bytes and the input
buffer is not currently faulted in;
3) We enter btrfs_direct_write(), lock the inode and call
generic_write_checks(), which calls generic_write_checks_count(), and
that function sets the iocb position to 0 with the following code:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
4) We call btrfs_dio_write() and enter into iomap, which will end up
calling btrfs_dio_iomap_begin() and that calls
btrfs_get_blocks_direct_write(), where we update the i_size of the
inode to 4096 bytes;
5) After btrfs_dio_iomap_begin() returns, iomap will attempt to access
the page of the write input buffer (at iomap_dio_bio_iter(), with a
call to bio_iov_iter_get_pages()) and fail with -EFAULT, which gets
returned to btrfs at btrfs_direct_write() via btrfs_dio_write();
6) At btrfs_direct_write() we get the -EFAULT error, unlock the inode,
fault in the write buffer and then goto to the label 'relock';
7) We lock again the inode, do all the necessary checks again and call
again generic_write_checks(), which calls generic_write_checks_count()
again, and there we set the iocb's position to 4K, which is the current
i_size of the inode, with the following code pointed above:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
8) Then we go again to btrfs_dio_write() and enter iomap and the write
succeeds, but it wrote to the file range [4K, 8K), leaving a hole in
the [0, 4K) range and an i_size of 8K, which goes against the
expectations of having the data written to the range [0, 4K) and get an
i_size of 4K.
Fix this by not unlocking the inode before faulting in the input buffer,
in case we get -EFAULT or an incomplete write, and not jumping to the
'relock' label after faulting in the buffer - instead jump to a location
immediately before calling iomap, skipping all the write checks and
relocking. This solves this problem and it's fine even in case the input
buffer is memory mapped to the same file range, since only holding the
range locked in the inode's io tree can cause a deadlock, it's safe to
keep the inode lock (VFS lock), as was fixed and described in commit
51bd9563b6 ("btrfs: fix deadlock due to page faults during direct IO
reads and writes").
A sample reproducer provided by a reporter is the following:
$ cat test.c
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <fcntl.h>
#include <stdio.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
if (argc < 2) {
fprintf(stderr, "Usage: %s <test file>\n", argv[0]);
return 1;
}
int fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT |
O_APPEND, 0644);
if (fd < 0) {
perror("creating test file");
return 1;
}
char *buf = mmap(NULL, 4096, PROT_READ,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ssize_t ret = write(fd, buf, 4096);
if (ret < 0) {
perror("pwritev2");
return 1;
}
struct stat stbuf;
ret = fstat(fd, &stbuf);
if (ret < 0) {
perror("stat");
return 1;
}
printf("size: %llu\n", (unsigned long long)stbuf.st_size);
return stbuf.st_size == 4096 ? 0 : 1;
}
A test case for fstests will be sent soon.
Reported-by: Hanna Czenczek <hreitz@redhat.com>
Link: https://lore.kernel.org/linux-btrfs/0b841d46-12fe-4e64-9abb-871d8d0de271@redhat.com/
Fixes: 8184620ae2 ("btrfs: fix lost file sync on direct IO write with nowait and dsync iocb")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs makes a block group read-only, it adds all free regions in the
block group to space_info->bytes_readonly. That free space excludes
reserved and pinned regions. OTOH, when btrfs makes the block group
read-write again, it moves all the unused regions into the block group's
zone_unusable. That unused region includes reserved and pinned regions.
As a result, it counts too much zone_unusable bytes.
Fortunately (or unfortunately), having erroneous zone_unusable does not
affect the calculation of space_info->bytes_readonly, because free
space (num_bytes in btrfs_dec_block_group_ro) calculation is done based on
the erroneous zone_unusable and it reduces the num_bytes just to cancel the
error.
This behavior can be easily discovered by adding a WARN_ON to check e.g,
"bg->pinned > 0" in btrfs_dec_block_group_ro(), and running fstests test
case like btrfs/282.
Fix it by properly considering pinned and reserved in
btrfs_dec_block_group_ro(). Also, add a WARN_ON and introduce
btrfs_space_info_update_bytes_zone_unusable() to catch a similar mistake.
Fixes: 169e0da91a ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The block group's avail bytes printed when dumping a space info subtract
the delalloc_bytes. However, as shown in btrfs_add_reserved_bytes() and
btrfs_free_reserved_bytes(), it is added or subtracted along with
"reserved" for the delalloc case, which means the "delalloc_bytes" is a
part of the "reserved" bytes. So, excluding it to calculate the avail space
counts delalloc_bytes twice, which can lead to an invalid result.
Fixes: e50b122b83 ("btrfs: print available space for a block group when dumping a space info")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs buffered write path runs through __extent_writepage() which
has some tricky return value handling for writepage_delalloc().
Specifically, when that returns 1, we exit, but for other return values
we continue and end up calling btrfs_folio_end_all_writers(). If the
folio has been unlocked (note that we check the PageLocked bit at the
start of __extent_writepage()), this results in an assert panic like
this one from syzbot:
BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure
BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction.
BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure
assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871
------------[ cut here ]------------
kernel BUG at fs/btrfs/subpage.c:871!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted
6.10.0-syzkaller-05505-gb1bc554e009e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 06/27/2024
RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871
Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d
0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8
6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89
RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246
RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc
R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001
R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__extent_writepage fs/btrfs/extent_io.c:1597 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline]
btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373
do_writepages+0x359/0x870 mm/page-writeback.c:2656
filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397
__filemap_fdatawrite_range mm/filemap.c:430 [inline]
__filemap_fdatawrite mm/filemap.c:436 [inline]
filemap_flush+0xdf/0x130 mm/filemap.c:463
btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:222
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xa2f/0x27f0 kernel/exit.c:877
do_group_exit+0x207/0x2c0 kernel/exit.c:1026
__do_sys_exit_group kernel/exit.c:1037 [inline]
__se_sys_exit_group kernel/exit.c:1035 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035
x64_sys_call+0x2634/0x2640
arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f075b70c9
Code: Unable to access opcode bytes at
0x7f5f075b709f.
I was hitting the same issue by doing hundreds of accelerated runs of
generic/475, which also hits IO errors by design.
I instrumented that reproducer with bpftrace and found that the
undesirable folio_unlock was coming from the following callstack:
folio_unlock+5
__process_pages_contig+475
cow_file_range_inline.constprop.0+230
cow_file_range+803
btrfs_run_delalloc_range+566
writepage_delalloc+332
__extent_writepage # inlined in my stacktrace, but I added it here
extent_write_cache_pages+622
Looking at the bisected-to patch in the syzbot report, Josef realized
that the logic of the cow_file_range_inline error path subtly changing.
In the past, on error, it jumped to out_unlock in cow_file_range(),
which honors the locked_page, so when we ultimately call
folio_end_all_writers(), the folio of interest is still locked. After
the change, we always unlocked ignoring the locked_page, on both success
and error. On the success path, this all results in returning 1 to
__extent_writepage(), which skips the folio_end_all_writers() call,
which makes it OK to have unlocked.
Fix the bug by wiring the locked_page into cow_file_range_inline() and
only setting locked_page to NULL on success.
Reported-by: syzbot+a14d8ac9af3a2a4fd0c8@syzkaller.appspotmail.com
Fixes: 0586d0a89e ("btrfs: move extent bit and page cleanup into cow_file_range_inline")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace a comma between expression statements by a semicolon.
Fixes: 178b48d588 ("xfs: remove the for_each_xbitmap_ helpers")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Fixes: 8f4b980ee6 ("xfs: pass the attr value to put_listent when possible")
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In the macro definition of XFS_DQUOT_LOGRES, a parameter is accepted,
but it is not used. Hence, it should be removed.
This patch has only passed compilation test, but it should be fine.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Since file_path() takes the output buffer as one of its arguments, we
might as well have it format directly into the tracepoint's char array
instead of wasting stack space.
Fixes: 3934e8ebb7 ("xfs: create a big array data structure")
Fixes: 5076a6040c ("xfs: support in-memory buffer cache targets")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290419.HPcyvqZu-lkp@intel.com/
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We got a report from the podman folks that selinux relabels that happen
as part of their process were returning ENOSPC when the filesystem is
completely full. This is because xattr changes reserve about 15 blocks
for the worst case, but the common case is for selinux contexts to be
the sole, in-inode xattr and consume no blocks.
We already allow reserved space consumption for XFS_ATTR_ROOT for things
such as ACLs, and SECURE namespace attributes are not so very different,
so allow them to use the reserved space as well.
Code-comment-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
V2: Remove local variable, add comment.
V3: Add Dave's preferred comment
V4: Spelling and comment beautification
kmemleak reported that we don't free the parent pointer names here if we
found corruption.
Fixes: 0d29a20fbd ("xfs: scrub parent pointers")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.
This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
-----BEGIN PGP SIGNATURE-----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=0y6/
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
Ben Dooks and Jeff Johnson.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRIEdicmeMNCZKVCdo6u2Upsdk6RAUCZqA9+gAKCRA6u2Upsdk6
RJETAQDN9OkX2GJlekEo5NPVD531ekV4G7OZMWTrmPKRINClZQEAj9Spt2zP5v4V
413unRBro9nuKfGgTaquXoHlCuPE+wE=
=L/SP
-----END PGP SIGNATURE-----
Merge tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
-----BEGIN PGP SIGNATURE-----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=nzTc
-----END PGP SIGNATURE-----
Merge tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
