'export suffix-y' does not work reliably because hyphens are disallowed
in shell variables.
A similar issue was fixed by commit 2bfbe7881e ("kbuild: Do not use
hyphen in exported variable name").
If I do similar in dash, ARCH=sh fails to build.
$ mv linux linux~
$ cd linux~
$ dash
$ make O=foo/bar ARCH=sh CROSS_COMPILE=sh4-linux-gnu- defconfig all
make[1]: Entering directory '/home/masahiro/linux~/foo/bar'
[ snip ]
make[4]: *** No rule to make target 'arch/sh/boot/compressed/vmlinux.bin.', needed by 'arch/sh/boot/compressed/piggy.o'. Stop.
make[3]: *** [/home/masahiro/linux~/arch/sh/boot/Makefile:40: arch/sh/boot/compressed/vmlinux] Error 2
make[2]: *** [/home/masahiro/linux~/arch/sh/Makefile:194: zImage] Error 2
make[1]: *** [/home/masahiro/linux~/Makefile:350: __build_one_by_one] Error 2
make[1]: Leaving directory '/home/masahiro/linux~/foo/bar'
make: *** [Makefile:219: __sub-make] Error 2
The maintainer of GNU Make stated that there is no consistent way to
export variables that do not meet the shell's naming criteria.
(https://savannah.gnu.org/bugs/?55719)
Consequently, you cannot use hyphens in exported variables.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJhkUvoAAoJELcQ+SIFb8HaQG8H/1pF/zhT+xYAK7dMOYfdyl9R
UGgnNGR2kjPDhsAkMHIYWVopP2KFV4kA4TCe8UcEt4GPeWZgGjV8lIaHJa/kdUsH
5tyRYtC8ZtVhJMVJQ8jZYZcTwOqYFFGtCksPq6/j0dHE0Gf+nQStSXNZqi8/XxE9
c3jDg+l7PVwdl7LWFedPVXcflhD5JLrRhyA/17V0INWrqP/MboXGRyq/Yluksw7x
C89ZXrgRE+5tN9icfRT4pl/XBpezWQkjuvsyHM9DWOjqICXfng8yeB5MZ/+R2uyF
qbXRSGqICOFhRRV9m/L0kypCYYiaZ8bBiYvLeGNggmpUJVMosIDFpS7kiYQavuA=
=dnw0
-----END PGP SIGNATURE-----
Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker.
* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
sh: pgtable-3level: Fix cast to pointer from integer of different size
sh: fix READ/WRITE redefinition warnings
sh: define __BIG_ENDIAN for math-emu
sh: math-emu: drop unused functions
sh: fix kconfig unmet dependency warning for FRAME_POINTER
sh: Cleanup about SPARSE_IRQ
sh: kdump: add some attribute to function
maple: fix wrong return value of maple_bus_init().
sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
sh: boards: Fix the cacography in irq.c
sh: check return code of request_irq
sh: fix trivial misannotations
make:
arch/sh/boot/Makefile:87: FORCE prerequisite is missing
Add the missing FORCE prerequisites for all build targets identified by
"make help".
Fixes: e1f86d7b4b ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
You do not need to build all of vmlinux.bin*
They are built on demand as prerequsites of uImage.bin*, hence should
be added to targets instead of extra-y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
All ARCHs have the same definition of MKIMAGE. Move it to Makefile.lib
to avoid duplication.
All ARCHs have similar definitions of cmd_uimage. Place a sufficiently
parameterized version in Makefile.lib to avoid duplication.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Mike Frysinger <vapier@gentoo.org> [Blackfin]
Tested-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add PHYSICAL_START kernel configuration parameter to set the address at
which the kernel should be loaded.
It has been observed on an sh7757lcr that simply modifying MEMORY_START
does not achieve this goal for 32bit sh. This is due to MEMORY_OFFSET in
arch/sh/kernel/vmlinux.lds.S bot being based on MEMORY_START on such
systems.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This introduces some much overdue chainsawing of the fixed PMB support.
fixed PMB was introduced initially to work around the fact that dynamic
PMB mode was relatively broken, though they were never intended to
converge. The main areas where there are differences are whether the
system is booted in 29-bit mode or 32-bit mode, and whether legacy
mappings are to be preserved. Any system booting in true 32-bit mode will
not care about legacy mappings, so these are roughly decoupled.
Regardless of the entry point, PMB and 32BIT are directly related as far
as the kernel is concerned, so we also switch back to having one select
the other.
With legacy mappings iterated through and applied in the initialization
path it's now possible to finally merge the two implementations and
permit dynamic remapping overtop of remaining entries regardless of
whether boot mappings are crafted by hand or inherited from the boot
loader.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch contains support for the romImage build target V2.
The resulting romImage file should be burned to rom
or flash and could be used as small boot loader.
Board code should keep their setup code in the file
romimage.h located in their mach include directory.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This builds on the bzip2/lzma zImage support change and wires it up for
uImages. Based on the blackfin implementation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This introduces a BITS export that can handily be picked up by Makefiles
for cleaner sharing. Reflect its use in arch/sh/boot/compressed/ in
preparation for unifying the Makefiles.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This provides a method for supporting fixed PMB mappings inherited from
the bootloader, as an alternative to the dynamic PMB mapping currently
used by the kernel. In the future these methods will be combined.
P1/P2 area is handled like a regular 29-bit physical address, and local
bus device are assigned P3 area addresses.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Fix "make uImage" load and entry addresses in 32-bit mode.
Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
fix the problem that cannot boot using uImage when PAGE_SIZE is
8kbyte or 64kbyte.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The printf string was broken in the same way the zImage one was before,
though the uImage managed to avoid getting fixed at that time. Do so now.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch changes the uImage target so that it generates a wrapped
compressed vmlinux, rather than a wrapped zImage. The previous version
matched the ARM, this version matches the PPC. However I would question
how useful a self decompressing image is with a boot loader which does
decompression, so I think this is more useful. I also feel it matches
the descrition in the help text ("Compressed kernel image") better.
Signed-off-by: Thomas Betker <thomas.betker@5etech.eu>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
When uImage is made by using 'make uImage', zImage is used.
If zImage is used, the compression method need not be set.
However, it is set for "gzip" for a compression method.
I corrected to set "none".
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Fix the shell call to explicitly use bash, since they are bash
specific and not all systems have bash as the default.
Signed-off-by: David McCullough <david_mccullough@au.securecomputing.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
