Commit Graph

198 Commits

Author SHA1 Message Date
Yinbo Zhu
31f1a8b0ec LoongArch: Export some arch-specific pm interfaces
Some PMC (Power Management Controllers) need to support DTS and will use
the suspend interfaces thus this patch was to export such interfaces for
their use.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:44 +08:00
Huacai Chen
01158487af LoongArch: Introduce hardware page table walker
Loongson-3A6000 and newer processors have hardware page table walker
(PTW) support. PTW can handle all fastpaths of TLBI/TLBL/TLBS/TLBM
exceptions by hardware, software only need to handle slowpaths (page
faults).

BTW, PTW doesn't append _PAGE_MODIFIED for page table entries, so we
change pmd_dirty() and pte_dirty() to also check _PAGE_DIRTY for the
"dirty" attribute.

Signed-off-by: Liang Gao <gaoliang@loongson.cn>
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:44 +08:00
Huacai Chen
e031a5f3f1 LoongArch: Support dbar with different hints
Traditionally, LoongArch uses "dbar 0" (full completion barrier) for
everything. But the full completion barrier is a performance killer, so
Loongson-3A6000 and newer processors have made finer granularity hints
available:

Bit4: ordering or completion (0: completion, 1: ordering)
Bit3: barrier for previous read (0: true, 1: false)
Bit2: barrier for previous write (0: true, 1: false)
Bit1: barrier for succeeding read (0: true, 1: false)
Bit0: barrier for succeeding write (0: true, 1: false)

Hint 0x700: barrier for "read after read" from the same address, which
is needed by LL-SC loops on old models (dbar 0x700 behaves the same as
nop if such reordering is disabled on new models).

This patch makes use of the various new hints for different kinds of
memory barriers. It brings performance improvements on Loongson-3A6000
series, while not affecting the existing models because all variants are
treated as 'dbar 0' there.

Why override queued_spin_unlock()?
After commit 01e3b958ef ("drivers: Remove explicit invocations
of mmiowb()") we need a completion barrier in queued_spin_unlock(), but
the generic implementation use smp_store_release() which only provide an
ordering barrier.

Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:44 +08:00
Huacai Chen
f6f0c9a74a LoongArch: Add SMT (Simultaneous Multi-Threading) support
Loongson-3A6000 has SMT (Simultaneous Multi-Threading) support, each
physical core has two logical cores (threads). This patch add SMT probe
and scheduler support via ACPI PPTT.

If SCHED_SMT enabled, Loongson-3A6000 is treated as 4 cores, 8 threads;
If SCHED_SMT disabled, Loongson-3A6000 is treated as 8 cores, 8 threads.

Remove smp_num_siblings to support HMP (Heterogeneous Multi-Processing).

Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:43 +08:00
Huacai Chen
616500232e LoongArch: Add vector extensions support
Add LoongArch's vector extensions support, which including 128bit LSX
(i.e., Loongson SIMD eXtension) and 256bit LASX (i.e., Loongson Advanced
SIMD eXtension).

Linux kernel doesn't use vector itself, it only handle exceptions and
context save/restore. So it only needs a subset of these instructions:

* Vector load/store:   vld vst vldx vstx xvld xvst xvldx xvstx
* 8bit-elements move:  vpickve2gr.b xvpickve2gr.b vinsgr2vr.b xvinsgr2vr.b
* 16bit-elements move: vpickve2gr.h xvpickve2gr.h vinsgr2vr.h xvinsgr2vr.h
* 32bit-elements move: vpickve2gr.w xvpickve2gr.w vinsgr2vr.w xvinsgr2vr.w
* 64bit-elements move: vpickve2gr.d xvpickve2gr.d vinsgr2vr.d xvinsgr2vr.d
* Elements permute:    vpermi.w vpermi.d xvpermi.w xvpermi.d xvpermi.q

Introduce AS_HAS_LSX_EXTENSION and AS_HAS_LASX_EXTENSION to avoid non-
vector toolchains complains unsupported instructions.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:43 +08:00
Tiezhu Yang
aa5e65dc08 LoongArch: Add support to clone a time namespace
We can see that "Time namespaces are not supported" on LoongArch:

(1) clone3 test
  # cd tools/testing/selftests/clone3 && make && ./clone3
  ...
  # Time namespaces are not supported
  ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
  # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0

(2) timens test
  # cd tools/testing/selftests/timens && make && ./timens
  ...
  1..0 # SKIP Time namespaces are not supported

On LoongArch the current kernel does not support CONFIG_TIME_NS which
depends on GENERIC_VDSO_TIME_NS, select GENERIC_VDSO_TIME_NS to enable
CONFIG_TIME_NS to build kernel/time/namespace.c.

Additionally, it needs to define some arch-dependent functions for the
timens, such as __arch_get_timens_vdso_data(), arch_get_vdso_data() and
vdso_join_timens().

At the same time, modify the layout of vvar to use one page size for
generic vdso data, expand another page size for timens vdso data and
assign LOONGARCH_VDSO_DATA_SIZE (maybe exceeds a page size if expand in
the future) for loongarch vdso data, at last add the callback function
vvar_fault() and modify stack_top().

With this patch under CONFIG_TIME_NS:

(1) clone3 test
  # cd tools/testing/selftests/clone3 && make && ./clone3
  ...
  ok 18 [739] Result (0) matches expectation (0)
  # Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0

(2) timens test
  # cd tools/testing/selftests/timens && make && ./timens
  ...
  # Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:43 +08:00
WANG Xuerui
38b10b269d LoongArch: Tweak CFLAGS for Clang compatibility
Now the arch code is mostly ready for LLVM/Clang consumption, it is time
to re-organize the CFLAGS a little to actually enable the LLVM build.
Namely, all -G0 switches from CFLAGS are removed, and -mexplicit-relocs
and -mdirect-extern-access are now wrapped with cc-option (with the
related asm/percpu.h definition guarded against toolchain combos that
are known to not work).

A build with !RELOCATABLE && !MODULE is confirmed working within a QEMU
environment; support for the two features are currently blocked on
LLVM/Clang, and will come later.

Why -G0 can be removed:

In GCC, -G stands for "small data threshold", that instructs the
compiler to put data smaller than the specified threshold in a dedicated
"small data" section (called .sdata on LoongArch and several other
arches).

However, benefiting from this would require ABI cooperation, which is
not the case for LoongArch; and current GCC behave the same whether -G0
(equal to disabling this optimization) is given or not. So, remove -G0
from CFLAGS altogether for one less thing to care about. This also
benefits LLVM/Clang compatibility where the -G switch is not supported.

Why -mexplicit-relocs can now be conditionally applied without
regressions:

Originally -mexplicit-relocs is unconditionally added to CFLAGS in case
of CONFIG_AS_HAS_EXPLICIT_RELOCS, because not having it (i.e. old GCC +
new binutils) would not work: modules will have R_LARCH_ABS_* relocs
inside, but given the rarity of such toolchain combo in the wild, it may
not be worthwhile to support it, so support for such relocs in modules
were not added back when explicit relocs support was upstreamed, and
-mexplicit-relocs is unconditionally added to fail the build early.

Now that Clang compatibility is desired, given Clang is behaving like
-mexplicit-relocs from day one but without support for the CLI flag, we
must ensure the flag is not passed in case of Clang. However, explicit
compiler flavor checks can be more brittle than feature detection: in
this case what actually matters is support for __attribute__((model))
when building modules. Given neither older GCC nor current Clang support
this attribute, probing for the attribute support and #error'ing out
would allow proper UX without checking for Clang, and also automatically
work when Clang support for the attribute is to be added in the future.

Why -mdirect-extern-access is now conditionally applied:

This is actually a nice-to-have optimization that can reduce GOT
accesses, but not having it is harmless either. Because Clang does not
support the option currently, but might do so in the future, conditional
application via cc-option ensures compatibility with both current and
future Clang versions.

Suggested-by: Xi Ruoyao <xry111@xry111.site> # cc-option changes
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:43 +08:00
WANG Xuerui
83d8b38967 LoongArch: Simplify the invtlb wrappers
The invtlb instruction has been supported by upstream LoongArch
toolchains from day one, so ditch the raw opcode trickery and just use
plain inline asm for it.

While at it, also make the invtlb asm statements barriers, for proper
modeling of the side effects. The functions are also marked as
__always_inline instead of just "inline", because they cannot work at
all if not inlined: the op argument will not be compile-time const in
that case, thus failing to satisfy the "i" constraint.

The signature of the other more specific invtlb wrappers contain unused
arguments right now, but these are not removed right away in order for
the patch to be focused. In the meantime, assertions are added to ensure
no accidental misuse happens before the refactor. (The more specific
wrappers cannot re-use the generic invtlb wrapper, because the ISA
manual says $zero shall be used in case a particular op does not take
the respective argument: re-using the generic wrapper would mean losing
control over the register usage.)

Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:43 +08:00
WANG Xuerui
53a4858ccd LoongArch: Make the CPUCFG&CSR ops simple aliases of compiler built-ins
In addition to less visual clutter, this also makes Clang happy
regarding the const-ness of arguments. In the original approach, all
Clang gets to see is the incoming arguments whose const-ness cannot be
proven without first being inlined; so Clang errors out here while GCC
is fine.

While at it, tweak several printk format strings because the return type
of csr_read64 becomes effectively unsigned long, instead of unsigned
long long.

Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:43 +08:00
WANG Xuerui
38bb46f945 LoongArch: Prepare for assemblers with proper FCSR class support
The GNU assembler (as of 2.40) mis-treats FCSR operands as GPRs, but
the LLVM IAS does not. Probe for this and refer to FCSRs as "$fcsrNN"
if support is present.

Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:43 +08:00
WANG Rui
24da0249d9 LoongArch: extable: Also recognize ABI names of registers
When the kernel is compiled with LLVM, the register names being handled
during exception fixup building are ABI names instead of bare $rNN
style. Add mapping for the ABI names for LLVM compatibility.

Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:43 +08:00
WANG Rui
0d03e9dce5 LoongArch: Add guard for the larch_insn_gen_xxx functions
Add guard for the larch_insn_gen_xxx functions to verify whether the
immediate operand is within the acceptable range.

Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:42 +08:00
Qi Hu
346dc92962 LoongArch: Fix the write_fcsr() macro
The "write_fcsr()" macro uses wrong the positions for val and dest in
asm. Fix it!

Reported-by: Miao HAO <haomiao19@mails.ucas.ac.cn>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-15 14:35:52 +08:00
Hongchen Zhang
ddc1729b07 LoongArch: Let pmd_present() return true when splitting pmd
When we split a pmd into ptes, pmd_present() and pmd_trans_huge() should
return true, otherwise it would be treated as a swap pmd.

This is the same as arm64 does in commit b65399f611 ("arm64/mm: Change
THP helpers to comply with generic MM semantics"), we also add a new bit
named _PAGE_PRESENT_INVALID for LoongArch.

Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-15 14:35:52 +08:00
Linus Torvalds
b115d85a95 Locking changes in v6.4:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
    primitive, which will be used in perf events ring-buffer code.
 
  - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation.
 
  - Misc cleanups/fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmRUvUoRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hlIhAArP33rTKi+HAndQ3UHW3XtmHRxEEQTfiE
 wvIoN89h58QW4DGMeAV4ltafbIPQAkI233Aogwz903L0qbDV0Ro4OU3XJembRuWl
 LeOADKwYyypXdOa8XICuY9aIP7e1/h0DF3ySs7inLcwK9JCyAIxnsVHYej+hsRXA
 kZoXN98T3TR1C0V9UQy4SU3HI1lC3tsG3R9Ti9TnYUg3ygVXhRE9lOQ4kv9lFPVz
 BNuj2Blj7KNiVaY9kehrhO54THI7NmsCVZO44Rcl48I0KAcFulAmFcNlE7GnR8Nj
 thj38pU6XAFVHXG8MYjgE+Al+PnK48NtJxexCtHyGvGG4D2aLzRMnkolxAUCcVuK
 G+UBsQm3ybjYgHgt1zuN6ehcpT+5tULkDH8JA7vrgZYaVgxHzsUaHgYfCCWKnmUY
 mPR6aImEmYZwZVNLskhe0HT4mq244bp+VnWlnJ6LZK7t/itenvDhqnj7KTi4Bfej
 lTHplOTitV/8uCEW8V4pX+YTEenVsIQmTc/G3iIabXP/6HzLffA3q4vyW6vKIErE
 pqrpuFA0Z4GB+pU0mJXt7+I7zscDVthwI055jDyQBjA7IcdVGm2MjQ6xcNRW5FYN
 UynvaEMocue4ZO4WdFsd1ZBUd9VfoNzGQspBw46DhCL1MEQBYv36SKQNjej/9aRr
 ilVwqnOWI2s=
 =mM0A
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:

 - Introduce local{,64}_try_cmpxchg() - a slightly more optimal
   primitive, which will be used in perf events ring-buffer code

 - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation

 - Misc cleanups/fixes

* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: Correct (cmp)xchg() instrumentation
  locking/x86: Define arch_try_cmpxchg_local()
  locking/arch: Wire up local_try_cmpxchg()
  locking/generic: Wire up local{,64}_try_cmpxchg()
  locking/atomic: Add generic try_cmpxchg{,64}_local() support
  locking/rwbase: Mitigate indefinite writer starvation
  locking/arch: Rename all internal __xchg() names to __arch_xchg()
2023-05-05 12:56:55 -07:00
Linus Torvalds
611c9d8830 LoongArch changes for v6.4
1, Better backtraces for humanization;
 2, Relay BCE exceptions to userland as SIGSEGV;
 3, Provide kernel fpu functions;
 4, Optimize memory ops (memset/memcpy/memmove);
 5, Optimize checksum and crc32(c) calculation;
 6, Add ARCH_HAS_FORTIFY_SOURCE selection;
 7, Add function error injection support;
 8, Add ftrace with direct call support;
 9, Add basic perf tools support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmRQlUsWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImekCTD/9fc2U+FIXhJOWV5yK9TCjJTRnK
 ASvk0JMYIDA60+fnof3C85tDu9Py9M5Mvt/Ec5pBaHErn16irq85AdD74/OmyCc2
 V4pRFHbYLu0WBFQN77gfNXH0XErgYXdceZvaMXajVz2H6NlSKSWZOVN/9ut5SLi3
 mt0rCwCsyahj92n8+hOjjZeFbDaPfPMCQ/8n9dnadhbBm9iz35fOKY+qIBHJMJ9a
 wPfZ2k3wu5DHs/2+ZjFNhlwrlURTp3RlcVQ7QWDcR1LM3Z4/lEkD8tAI/r8sR9gw
 rxzoBSaQzo/zscUmYo0jh1BoW2w0n+x/GfH70Pyz3iwZky3jwpdP0nRwnB4h+tnE
 wKlpa5K7RfaqUxZExFfGALmlkALtjQgiXPYbORHMsD6l6XwrOMCeyQismm1oo66m
 JBlsdXCms5aracYmWhXnVmTlBqGjAgYAxm62ap62uwlmULy4qUv6kFeW0fERn9NJ
 5bKgbrkcal/WkMBawQqtG03niRkykqpqFooZ95ubj4Lib4VM0BmEvFrREjgXO7AE
 jpLimYsT9ROE3YQJqyWyLYkmc2ShwWj70INTpz2viMtQ2blIRKvRVsxs976bHuwS
 mGsZtiiANjhT2bAUhN7bct2Cf13MtPXiuf0etcJbrNSAtoBIFk+3uRRKHH2rM+CK
 oKYjO+exPyuQ9nSOBg==
 =3aTV
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Better backtraces for humanization

 - Relay BCE exceptions to userland as SIGSEGV

 - Provide kernel fpu functions

 - Optimize memory ops (memset/memcpy/memmove)

 - Optimize checksum and crc32(c) calculation

 - Add ARCH_HAS_FORTIFY_SOURCE selection

 - Add function error injection support

 - Add ftrace with direct call support

 - Add basic perf tools support

* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
  tools/perf: Add basic support for LoongArch
  LoongArch: ftrace: Add direct call trampoline samples support
  LoongArch: ftrace: Add direct call support
  LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
  LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
  LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
  LoongArch: Add support for function error injection
  LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
  LoongArch: crypto: Add crc32 and crc32c hw acceleration
  LoongArch: Add checksum optimization for 64-bit system
  LoongArch: Optimize memory ops (memset/memcpy/memmove)
  LoongArch: Provide kernel fpu functions
  LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
  LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
  LoongArch: Humanize the ESTAT line when showing registers
  LoongArch: Humanize the ECFG line when showing registers
  LoongArch: Humanize the EUEN line when showing registers
  LoongArch: Humanize the PRMD line when showing registers
  LoongArch: Humanize the CRMD line when showing registers
  LoongArch: Fix format of CSR lines during show_regs()
  ...
2023-05-04 12:40:16 -07:00
Youling Tang
9cdc3b6a29 LoongArch: ftrace: Add direct call support
Select the HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS to provide the
register_ftrace_direct[_multi] interfaces allowing users to register
the customed trampoline (direct_caller) as the mcount for one or more
target functions. And modify_ftrace_direct[_multi] are also provided
for modifying direct_caller.

There are a few cases to distinguish:
- If a direct call ops is the only one tracing a function AND the direct
  called trampoline is within the reach of a 'bl' instruction
  -> the ftrace patchsite jumps to the trampoline
- Else
  -> the ftrace patchsite jumps to the ftrace_regs_caller trampoline points
     to ftrace_list_ops so it iterates over all registered ftrace ops,
     including the direct call ops and calls its call_direct_funcs handler
     which stores the direct called trampoline's address in the ftrace_regs
     and the ftrace_regs_caller trampoline will return to that address
     instead of returning to the traced function

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:53 +08:00
Qing Zhang
6fbff14a63 LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
Add new ftrace_regs_{get,set}_*() helpers which can be used to manipulate
ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y, these can always
be used on any ftrace_regs, and when CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
=n these can be used when regs are available.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:52 +08:00
Tiezhu Yang
8b5ee2c66d LoongArch: Add support for function error injection
Inspired by the commit 42d038c4fb ("arm64: Add support for function
error injection") and the commit ee55ff803b ("riscv: Add support for
function error injection"), this patch supports function error injection
for LoongArch.

Mainly implement two functions:
(1) regs_set_return_value() which is used to overwrite the return value,
(2) override_function_with_return() which is used to override the probed
function returning and jump to its caller.

Here is a simple test under CONFIG_FUNCTION_ERROR_INJECTION and
CONFIG_FAIL_FUNCTION:

  # echo sys_clone > /sys/kernel/debug/fail_function/inject
  # echo 100 > /sys/kernel/debug/fail_function/probability
  # dmesg
  bash: fork: Invalid argument
  # dmesg
  ...
  FAULT_INJECTION: forcing a failure.
  name fail_function, interval 1, probability 100, space 0, times 1
  ...
  Call Trace:
  [<90000000002238f4>] show_stack+0x5c/0x180
  [<90000000012e384c>] dump_stack_lvl+0x60/0x88
  [<9000000000b1879c>] should_fail_ex+0x1b0/0x1f4
  [<900000000032ead4>] fei_kprobe_handler+0x28/0x6c
  [<9000000000230970>] kprobe_breakpoint_handler+0xf0/0x118
  [<90000000012e3e60>] do_bp+0x2c4/0x358
  [<9000000002241924>] exception_handlers+0x1924/0x10000
  [<900000000023b7d0>] sys_clone+0x0/0x4
  [<90000000012e4744>] do_syscall+0x7c/0x94
  [<9000000000221e44>] handle_syscall+0xc4/0x160

Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:52 +08:00
Bibo Mao
69e3a6aa6b LoongArch: Add checksum optimization for 64-bit system
LoongArch platform is 64-bit system, which supports 8-bytes memory
accessing, but generic checksum functions use 4-byte memory access.
So add 8-bytes memory access optimization for checksum functions on
LoongArch. And the code comes from arm64 system.

When network hw checksum is disabled, iperf performance improves about
10% with this patch.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:43 +08:00
Huacai Chen
2b3bd32ea3 LoongArch: Provide kernel fpu functions
Provide kernel_fpu_begin()/kernel_fpu_end() to allow the kernel itself
to use fpu. They can be used by some other kernel components, e.g., the
AMDGPU graphic driver for DCN.

Reported-by: WANG Xuerui <kernel@xen0n.name>
Tested-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:27 +08:00
WANG Xuerui
c23e7f01cf LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
SEGV_BNDERR was introduced initially for supporting the Intel MPX, but
fell into disuse after the MPX support was removed. The LoongArch
bounds-checking instructions behave very differently than MPX, but
overall the interface is still kind of suitable for conveying the
information to userland when bounds-checking assertions trigger, so we
wouldn't have to invent more UAPI. Specifically, when the BCE triggers,
a SEGV_BNDERR is sent to userland, with si_addr set to the out-of-bounds
address or value (in asrt{gt,le}'s case), and one of si_lower or
si_upper set to the configured bound depending on the faulting
instruction. The other bound is set to either 0 or ULONG_MAX to resemble
a range with both lower and upper bounds.

Note that it is possible to have si_addr == si_lower in case of a
failing asrtgt or {ld,st}gt, because those instructions test for strict
greater-than relationship. This should not pose a problem for userland,
though, because the faulting PC is available for the application to
associate back to the exact instruction for figuring out the
expectation.

Example exception context generated by a faulting `asrtgt.d t0, t1`
(assert t0 > t1 or BCE) with t0=100 and t1=200:

> pc 00005555558206a4 ra 00007ffff2d854fc tp 00007ffff2f2f180 sp 00007ffffbf9fb80
> a0 0000000000000002 a1 00007ffffbf9fce8 a2 00007ffffbf9fd00 a3 00007ffff2ed4558
> a4 0000000000000000 a5 00007ffff2f044c8 a6 00007ffffbf9fce0 a7 fffffffffffff000
> t0 0000000000000064 t1 00000000000000c8 t2 00007ffffbfa2d5e t3 00007ffff2f12aa0
> t4 00007ffff2ed6158 t5 00007ffff2ed6158 t6 000000000000002e t7 0000000003d8f538
> t8 0000000000000005 u0 0000000000000000 s9 0000000000000000 s0 00007ffffbf9fce8
> s1 0000000000000002 s2 0000000000000000 s3 00007ffff2f2c038 s4 0000555555820610
> s5 00007ffff2ed5000 s6 0000555555827e38 s7 00007ffffbf9fd00 s8 0000555555827e38
>    ra: 00007ffff2d854fc
>   ERA: 00005555558206a4
>  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
>  PRMD: 00000007 (PPLV3 +PIE -PWE)
>  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
>  ECFG: 0007181c (LIE=2-4,11-12 VS=7)
> ESTAT: 000a0000 [BCE] (IS= ECode=10 EsubCode=0)
>  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)

Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:27 +08:00
WANG Xuerui
aa552254cf LoongArch: Define regular names for BCE/WATCH/HVC/GSPR exceptions
Define them according to the ISA manual, in order to enable matching the
sub-exceptions for humanization purposes later.

Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:10 +08:00
WANG Xuerui
9e36fa4299 LoongArch: Clean up the architectural interrupt definitions
While interrupts are assigned ECodes `64 + interrupt number`, all
existing use sites of interrupt numbers want the 64 subtracted.
Re-arrange the definitions so that the actual interrupt number is used
everywhere, and make EXCCODE_INT_END inclusive as it is more intuitive
that way.

While at it, according to the asm/loongarch.h definitions, the total
number of architectural interrupts should be 14, but various other
places indicate otherwise (13 or 15). Those places have been adjusted
to 14 as well for consistency.

Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:10 +08:00
Uros Bizjak
d994f2c8e2 locking/arch: Wire up local_try_cmpxchg()
Implement target specific support for local_try_cmpxchg()
and local_cmpxchg() using typed C wrappers that call their
_local counterpart and provide additional checking of
their input arguments.

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230405141710.3551-4-ubizjak@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-29 09:09:16 +02:00
Andrzej Hajda
068550631f locking/arch: Rename all internal __xchg() names to __arch_xchg()
Decrease the probability of this internal facility to be used by
driver code.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [riscv]
Link: https://lore.kernel.org/r/20230118154450.73842-1-andrzej.hajda@intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-29 09:08:44 +02:00
Linus Torvalds
2aff7c706c Objtool changes for v6.4:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
    this inconsistently follow this new, common convention, and fix all the fallout
    that objtool can now detect statically.
 
  - Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
    split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
 
  - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
 
  - Generate ORC data for __pfx code
 
  - Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
 
  - Misc improvements & fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmRK1x0RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1ghxQ/+IkCynMYtdF5OG9YwbcGJqsPSfOPMEcEM
 pUSFYg+gGPBDT/fJfcVSqvUtdnWbLC2kXt9yiswXz3X3J2nmNkBk5YKQftsNDcul
 TmKeqIIAK51XTncpegKH0EGnOX63oZ9Vxa8CTPdDlb+YF23Km2FoudGRI9F5qbUd
 LoraXqGYeiaeySkGyWmZVl6Uc8dIxnMkTN3H/oI9aB6TOrsi059hAtFcSaFfyemP
 c4LqXXCH7k2baiQt+qaLZ8cuZVG/+K5r2N2cmjO5kmJc6ynIaFnfMe4XxZLjp5LT
 /PulYI15bXkvSARKx5CRh/CDHMOx5Blw+ASO0RhWbdy0WH4ZhhcaVF5AeIpPW86a
 1LBcz97rMp72WmvKgrJeVO1r9+ll4SI6/YKGJRsxsCMdP3hgFpqntXyVjTFNdTM1
 0gH6H5v55x06vJHvhtTk8SR3PfMTEM2fRU5jXEOrGowoGifx+wNUwORiwj6LE3KQ
 SKUdT19RNzoW3VkFxhgk65ThK1S7YsJUKRoac3YdhttpqqqtFV//erenrZoR4k/p
 vzvKy68EQ7RCNyD5wNWNFe0YjeJl5G8gQ8bUm4Xmab7djjgz+pn4WpQB8yYKJLAo
 x9dqQ+6eUbw3Hcgk6qQ9E+r/svbulnAL0AeALAWK/91DwnZ2mCzKroFkLN7napKi
 fRho4CqzrtM=
 =NwEV
 -----END PGP SIGNATURE-----

Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

 - Mark arch_cpu_idle_dead() __noreturn, make all architectures &
   drivers that did this inconsistently follow this new, common
   convention, and fix all the fallout that objtool can now detect
   statically

 - Fix/improve the ORC unwinder becoming unreliable due to
   UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
   and UNWIND_HINT_UNDEFINED to resolve it

 - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code

 - Generate ORC data for __pfx code

 - Add more __noreturn annotations to various kernel startup/shutdown
   and panic functions

 - Misc improvements & fixes

* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  x86/hyperv: Mark hv_ghcb_terminate() as noreturn
  scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
  x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
  btrfs: Mark btrfs_assertfail() __noreturn
  objtool: Include weak functions in global_noreturns check
  cpu: Mark nmi_panic_self_stop() __noreturn
  cpu: Mark panic_smp_self_stop() __noreturn
  arm64/cpu: Mark cpu_park_loop() and friends __noreturn
  x86/head: Mark *_start_kernel() __noreturn
  init: Mark start_kernel() __noreturn
  init: Mark [arch_call_]rest_init() __noreturn
  objtool: Generate ORC data for __pfx code
  x86/linkage: Fix padding for typed functions
  objtool: Separate prefix code from stack validation code
  objtool: Remove superfluous dead_end_function() check
  objtool: Add symbol iteration helpers
  objtool: Add WARN_INSN()
  scripts/objdump-func: Support multiple functions
  context_tracking: Fix KCSAN noinstr violation
  objtool: Add stackleak instrumentation to uaccess safe list
  ...
2023-04-28 14:02:54 -07:00
Enze Li
213ef669d1 LoongArch: Replace hard-coded values in comments with VALEN
According to LoongArch documentation [1], CSR.PGDL and CSR.PGDH are
concerned with the VA's MSB which is VALEN-1 instead of always being 47.
Fix comments to avoid misleading others.

[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#page-global-directory-base-address-for-lower-half-address-space

Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19 12:07:27 +08:00
Tiezhu Yang
afca6e0649 LoongArch: Clean up plat_swiotlb_setup() related code
After commit c78c43fe7d ("LoongArch: Use acpi_arch_dma_setup() and
remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted,
so clean up the related code.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19 12:07:27 +08:00
Qing Zhang
ff9f3d7aef LoongArch: Adjust user_watch_state for explicit alignment
This is done in order to easily calculate the number of breakpoints in
hw_break_get()/hw_break_set().

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19 12:07:27 +08:00
Huacai Chen
93eb1215ed LoongArch: module: set section addresses to 0x0
These got*, plt* and .text.ftrace_trampoline sections specified for
LoongArch have non-zero addressses. Non-zero section addresses in a
relocatable ELF would confuse GDB when it tries to compute the section
offsets and it ends up printing wrong symbol addresses. Therefore, set
them to zero, which mirrors the change in commit 5d8591bc0f
("arm64 module: set plt* section addresses to 0x0").

Cc: stable@vger.kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-18 19:38:58 +08:00
Qing Zhang
6637775ca3 LoongArch: Fix _CONST64_(x) as unsigned
Addresses should all be of unsigned type to avoid unnecessary conversions.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-18 19:38:58 +08:00
Huacai Chen
1cf62488f5 LoongArch: Fix build error if CONFIG_SUSPEND is not set
We can see the following build error on LoongArch if CONFIG_SUSPEND is
not set:

  ld: drivers/acpi/sleep.o: in function 'acpi_pm_prepare':
  sleep.c:(.text+0x2b8): undefined reference to 'loongarch_wakeup_start'

Here is the call trace:

  acpi_pm_prepare()
    __acpi_pm_prepare()
      acpi_sleep_prepare()
        acpi_get_wakeup_address()
          loongarch_wakeup_start()

Root cause: loongarch_wakeup_start() is defined in arch/loongarch/power/
suspend_asm.S which is only built under CONFIG_SUSPEND. In order to fix
the build error, just let acpi_get_wakeup_address() return 0 if CONFIG_
SUSPEND is not set.

Fixes: 366bb35a8e ("LoongArch: Add suspend (ACPI S3) support")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/11215033-fa3c-ecb1-2fc0-e9aeba47be9b@infradead.org/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-18 19:38:58 +08:00
Huacai Chen
df83033604 LoongArch: Fix probing of the CRC32 feature
Not all LoongArch processors support CRC32 instructions. This feature
is indicated by CPUCFG1.CRC32 (Bit25) but it is wrongly defined in the
previous versions of the ISA manual (and so does in loongarch.h). The
CRC32 feature is set unconditionally now, so fix it.

BTW, expose the CRC32 feature in /proc/cpuinfo.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-18 19:38:58 +08:00
Huacai Chen
16c52e5030 LoongArch: Make WriteCombine configurable for ioremap()
LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).

This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.

Kernel parameter writecombine=on/off can be used to override the Kconfig
option.

Cc: stable@vger.kernel.org
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Reviewed-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-18 19:38:58 +08:00
Josh Poimboeuf
6c0f2d071e loongarch/cpu: Mark play_dead() __noreturn
play_dead() doesn't return.  Annotate it as such.  By extension this
also makes arch_cpu_idle_dead() noreturn.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/4da55acfdec8a9132c4e21ffb7edb1f846841193.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
2023-03-06 15:34:06 -08:00
Linus Torvalds
a8356cdb5b LoongArch changes for v6.3
1, Make -mstrict-align configurable;
 2, Add kernel relocation and KASLR support;
 3, Add single kernel image implementation for kdump;
 4, Add hardware breakpoints/watchpoints support;
 5, Add kprobes/kretprobes/kprobes_on_ftrace support;
 6, Add LoongArch support for some selftests.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmP+9H0WHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImerz+D/98MjkLXM4qtgfAxuBKpVdEVA4U
 bzO19UlpqWlwTJbwrhf0GYsRrAis37PTVJG4eNORJairJ/oTkMtEEBPhwq0D9Whc
 URDEh+VrjzFztLsu2OlvzOA9gE7lpg+xAx2LKflP7ixlOELOWeercDLW3octp5/J
 CJDE8wPaw9tJrMHFWuiVybs03yZmY3YFV55JdWL9hY8Ryy4DY5997mruOfzjvHpl
 EfDgQM2zCn2JSQwaD+Kl3MHxHyRx07Tj2wnZAh9ptaGeptK/yplc7nqRwhe7BevS
 QwClhJNPICcOi+evZ7cDUY0PTL4evpw2KRnF1N4zw+58RhZECjVrCEJNdf6L1scj
 muptQngWKrE/TJvn4way3cJr44stSCtT71elPhn629S23my/CauMmFqCqKpYOPOf
 pxwzzCaqDcaZKwMu96qBkZS76tIrhoNeNFntj+C9RS+8ezY3+o144S3vF1A6A9Zb
 M4gwa2NiQuLqnCUwKK6dZkLQVX2NMIMViUkYNKdUStxNWx/K7fFmXcl0ycAFpGYp
 8Q95LLH34jUrpSgqMSCmcylsPvNiN1QnuXFnw8Tu+zDthp5dOzio60tORLPM1ZUq
 gobPeGjeTQInq4eMCf2B5HH8fOMVtJyj6H4K9G1M6HUMg64UtcBp6BvEbwPxTxNN
 sIOFUjDfDnBiIXWF4w==
 =SzL5
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Make -mstrict-align configurable

 - Add kernel relocation and KASLR support

 - Add single kernel image implementation for kdump

 - Add hardware breakpoints/watchpoints support

 - Add kprobes/kretprobes/kprobes_on_ftrace support

 - Add LoongArch support for some selftests.

* tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits)
  selftests/ftrace: Add LoongArch kprobe args string tests support
  selftests/seccomp: Add LoongArch selftesting support
  tools: Add LoongArch build infrastructure
  samples/kprobes: Add LoongArch support
  LoongArch: Mark some assembler symbols as non-kprobe-able
  LoongArch: Add kprobes on ftrace support
  LoongArch: Add kretprobes support
  LoongArch: Add kprobes support
  LoongArch: Simulate branch and PC* instructions
  LoongArch: ptrace: Add hardware single step support
  LoongArch: ptrace: Add function argument access API
  LoongArch: ptrace: Expose hardware breakpoints to debuggers
  LoongArch: Add hardware breakpoints/watchpoints support
  LoongArch: kdump: Add crashkernel=YM handling
  LoongArch: kdump: Add single kernel image implementation
  LoongArch: Add support for kernel address space layout randomization (KASLR)
  LoongArch: Add support for kernel relocation
  LoongArch: Add la_abs macro implementation
  LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
  LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
  ...
2023-03-01 09:27:00 -08:00
Tiezhu Yang
fcf77d0162 LoongArch: Mark some assembler symbols as non-kprobe-able
Some assembler symbols are not kprobe safe, such as handle_syscall (used
as syscall exception handler), *memset*/*memcpy*/*memmove* (may cause
recursive exceptions), they can not be instrumented, just blacklist them
for kprobing.

Here is a related problem and discussion:
Link: https://lore.kernel.org/lkml/20230114143859.7ccc45c1c5d9ce302113ab0a@kernel.org/

Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Tiezhu Yang
3f55368600 LoongArch: Add kretprobes support
Use the generic kretprobe trampoline handler to add kretprobes support
for LoongArch.

Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Tiezhu Yang
6d4cc40fb5 LoongArch: Add kprobes support
Kprobes allows you to trap at almost any kernel address and execute a
callback function, this commit adds kprobes support for LoongArch.

Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Tiezhu Yang
9b3441a6b0 LoongArch: Simulate branch and PC* instructions
According to LoongArch Reference Manual, simulate branch and PC*
instructions, this is preparation for later patch.

Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#branch-instructions
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_pcaddi_pcaddu121_pcaddu18l_pcalau12i

Tested-by: Jeff Xie <xiehuan09@gmail.com>
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Qing Zhang
424421a7f3 LoongArch: ptrace: Add hardware single step support
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT,
PTRACE_KILL and PTRACE_SINGLESTEP handling. This implies defining
arch_has_single_step() and implementing the user_enable_single_step()
and user_disable_single_step() functions.

LoongArch cannot do hardware single-stepping per se, the hardware
single-stepping it is achieved by configuring the instruction fetch
watchpoints (FWPS) and specifies that the next instruction must trigger
the watch exception by setting the mask bit. In some scenarios
CSR.FWPS.Skip is used to ignore the next hit result, avoid endless
repeated triggering of the same watchpoint without canceling it.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Qing Zhang
356bd6f236 LoongArch: ptrace: Add function argument access API
Add regs_get_argument() which returns N th argument of the function
call, This enables ftrace kprobe events to access kernel function
arguments via $argN syntax for later use.

E.g.:
echo 'p bio_add_page arg1=$arg1' > kprobe_events
bash: echo: write error: Invalid argument

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Qing Zhang
1a69f7a161 LoongArch: ptrace: Expose hardware breakpoints to debuggers
Implement the regset-based ptrace interface that exposes hardware
breakpoints to user-space debuggers to query and set instruction and
data breakpoints.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Qing Zhang
edffa33c7b LoongArch: Add hardware breakpoints/watchpoints support
Use perf framework to manage hardware instruction and data breakpoints.

LoongArch defines hardware watchpoint functions for instruction fetch
and memory load/store operations. After the software configures hardware
watchpoints, the processor hardware will monitor the access address of
the instruction fetch and load/store operation, and trigger an exception
of the watchpoint when it meets the conditions set by the watchpoint.

The hardware monitoring points for instruction fetching and load/store
operations each have a register for the overall configuration of all
monitoring points, a register for recording the status of all monitoring
points, and four registers required for configuration of each watchpoint
individually.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Youling Tang
3f89765d62 LoongArch: kdump: Add single kernel image implementation
This feature depends on the kernel being relocatable.

Enable using single kernel image for kdump, and then no longer need to
build two kernels (production kernel and capture kernel share a single
kernel image).

Also enable CONFIG_CRASH_DUMP in loongson3_defconfig.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Youling Tang
e5f02b51fa LoongArch: Add support for kernel address space layout randomization (KASLR)
This patch adds support for relocating the kernel to a random address.

Entropy is derived from the banner, which will change every build and
random_get_entropy() which should provide additional runtime entropy.

The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from
its link address. Because relocation happens so early during the kernel
booting, the amount of physical memory has not yet been determined. This
means the only way to limit relocation within the available memory is
via Kconfig. So we limit the maximum value of RANDOMIZE_BASE_MAX_OFFSET
to 256M (0x10000000) because our memory layout has many holes.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Xi Ruoyao <xry111@xry111.site> # Fix compiler warnings
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00
Youling Tang
d8da19fbde LoongArch: Add support for kernel relocation
This config allows to compile kernel as PIE and to relocate it at any
virtual address at runtime: this paves the way to KASLR.

Runtime relocation is possible since relocation metadata are embedded
into the kernel.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Xi Ruoyao <xry111@xry111.site> # Use arch_initcall
Signed-off-by: Jinyang He <hejinyang@loongson.cn> # Provide la_abs relocation code
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:16 +08:00
Youling Tang
396233c650 LoongArch: Add la_abs macro implementation
Use the "la_abs macro" instead of the "la.abs pseudo instruction" to
prepare for the subsequent PIE kernel. When PIE is not enabled, la_abs
is equivalent to la.abs.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:16 +08:00
Youling Tang
8cbd5ebfe2 LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs directly.
This is a preparation for subsequent patches.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:16 +08:00