The edge range checking for the registers is supported by the verifier
now, so we can activate the extended logic in
tools/testing/selftests/bpf/prog_tests/reg_bounds.c/range_cond() to test
such logic.
Besides, I added some cases to the "crafted_cases" array for this logic.
These cases are mainly used to test the edge of the src reg and dst reg.
All reg bounds testings has passed in the SLOW_TESTS mode:
$ export SLOW_TESTS=1 && ./test_progs -t reg_bounds -j
Summary: 65/18959832 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-4-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The "S32_MIN" is already defined with s32 casting, so there is no need
to do it again.
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231219134800.1550388-3-menglong8.dong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=stU2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is safe to always start with imprecise SCALAR_VALUE register.
Previously __mark_reg_const_zero() relied on caller to reset precise
mark, but it's very error prone and we already missed it in a few
places. So instead make __mark_reg_const_zero() reset precision always,
as it's a safe default for SCALAR_VALUE. Explanation is basically the
same as for why we are resetting (or rather not setting) precision in
current state. If necessary, precision propagation will set it to
precise correctly.
As such, also remove a big comment about forward precision propagation
in mark_reg_stack_read() and avoid unnecessarily setting precision to
true after reading from STACK_ZERO stack. Again, precision propagation
will correctly handle this, if that SCALAR_VALUE register will ever be
needed to be precise.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org
The output from ynl-gen-rst.py has extra indentation that causes extra
<blockquote> elements to be generated in the HTML output.
Reduce the indentation so that sphinx doesn't generate unnecessary
<blockquote> elements.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-14-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The generated .rst for attribute-sets currently uses a sub-sub-heading
for each attribute, with the attribute name in bold. This makes
attributes stand out more than the attribute-set sub-headings they are
part of.
Remove the bold markup from attribute sub-sub-headings.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-13-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The index of netlink specs was being generated unsorted. Sort the output
before generating the index entries.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-12-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tc netlink-raw family needs binary and pad types for several
qopt C structs. Add support for them to ynl.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the 'sub-message' attribute type in ynl.
Encode support is not yet implemented. Support for sub-message selectors
at a different nest level from the key attribute is not yet supported.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use expression formatting that conforms to the python style guide.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We fail to create uprobe if we pass negative offset. Add more tests
validating kernel-side error checking code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231217215538.3361991-3-jolsa@kernel.org
When there is bpf_list_head or bpf_rb_root field in map value, the free
of map btf and the free of map value may run concurrently and there may
be use-after-free problem, so add two test cases to demonstrate it. And
the use-after-free problem can been easily reproduced by using bpf_next
tree and a KASAN-enabled kernel.
The first test case tests the racing between the free of map btf and the
free of array map. It constructs the racing by releasing the array map in
the end after other ref-counter of map btf has been released. To delay
the free of array map and make it be invoked after btf_free_rcu() is
invoked, it stresses system_unbound_wq by closing multiple percpu array
maps before it closes the array map.
The second case tests the racing between the free of map btf and the
free of inner map. Beside using the similar method as the first one
does, it uses bpf_map_delete_elem() to delete the inner map and to defer
the release of inner map after one RCU grace period.
The reason for using two skeletons is to prevent the release of outer
map and inner map in map_in_map_btf.c interfering the release of bpf
map in normal_map_btf.c.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231216035510.4030605-1-houtao@huaweicloud.com
The func_addr used to be NULL for indirect trampolines used by struct_ops.
Now func_addr is a valid function pointer.
Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition.
Fixes: 2cd3e3772e ("x86/cfi,bpf: Fix bpf_struct_ops CFI")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com
Check multiple keys on a socket:
- rotation on closed socket
- current/rnext operations shouldn't be possible on listen sockets
- current/rnext key set should be the one, that's used on connect()
- key rotations with pseudo-random generated keys
- copying matching keys on connect() and on accept()
At this moment there are 3 tests that are "expected" to fail: a kernel
fix is needed to improve the situation, they are marked XFAIL.
Sample output:
> # ./key-management_ipv4
> 1..120
> # 1601[lib/setup.c:239] rand seed 1700526653
> TAP version 13
> ok 1 closed socket, delete a key: the key was deleted
> ok 2 closed socket, delete all keys: the key was deleted
> ok 3 closed socket, delete current key: key deletion was prevented
> ok 4 closed socket, delete rnext key: key deletion was prevented
> ok 5 closed socket, delete a key + set current/rnext: the key was deleted
> ok 6 closed socket, force-delete current key: the key was deleted
> ok 7 closed socket, force-delete rnext key: the key was deleted
> ok 8 closed socket, delete current+rnext key: key deletion was prevented
> ok 9 closed socket, add + change current key
> ok 10 closed socket, add + change rnext key
> ok 11 listen socket, delete a key: the key was deleted
> ok 12 listen socket, delete all keys: the key was deleted
> ok 13 listen socket, setting current key not allowed
> ok 14 listen socket, setting rnext key not allowed
> ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200
> ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16
> ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16
> ok 18 listen socket, getsockopt(TCP_AO_REPAIR) is restricted
> ok 19 listen socket, setsockopt(TCP_AO_REPAIR) is restricted
> ok 20 listen socket, delete a key + set current/rnext: key deletion was prevented
> ok 21 listen socket, force-delete current key: key deletion was prevented
> ok 22 listen socket, force-delete rnext key: key deletion was prevented
> ok 23 listen socket, delete a key: the key was deleted
> ok 24 listen socket, add + change current key
> ok 25 listen socket, add + change rnext key
> ok 26 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 27 client: Check current/rnext keys unset before connect(): current key 19 as expected
> ok 28 client: Check current/rnext keys unset before connect(): rnext key 146 as expected
> ok 29 server: Check current/rnext keys unset before connect(): server alive
> ok 30 server: Check current/rnext keys unset before connect(): passed counters checks
> ok 31 client: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 32 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 33 server: Check current/rnext keys unset before connect(): passed counters checks
> ok 34 client: Check current/rnext keys unset before connect(): passed counters checks
> ok 35 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 36 server: Check current/rnext keys set before connect(): server alive
> ok 37 server: Check current/rnext keys set before connect(): passed counters checks
> ok 38 client: Check current/rnext keys set before connect(): current key 10 as expected
> ok 39 client: Check current/rnext keys set before connect(): rnext key 137 as expected
> ok 40 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 41 client: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 42 client: Check current/rnext keys set before connect(): passed counters checks
> ok 43 server: Check current/rnext keys set before connect(): passed counters checks
> ok 44 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 45 server: Check current != rnext keys set before connect(): server alive
> ok 46 server: Check current != rnext keys set before connect(): passed counters checks
> ok 47 client: Check current != rnext keys set before connect(): current key 10 as expected
> ok 48 client: Check current != rnext keys set before connect(): rnext key 132 as expected
> ok 49 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 50 client: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 51 client: Check current != rnext keys set before connect(): passed counters checks
> ok 52 server: Check current != rnext keys set before connect(): passed counters checks
> ok 53 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 54 server: Check current flapping back on peer's RnextKey request: server alive
> ok 55 server: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 56 client: Check current flapping back on peer's RnextKey request: current key 10 as expected
> ok 57 client: Check current flapping back on peer's RnextKey request: rnext key 132 as expected
> ok 58 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 59 client: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 60 server: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 61 client: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 62 server: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 63 server: Rotate over all different keys: server alive
> ok 64 server: Rotate over all different keys: passed counters checks
> ok 65 server: Rotate over all different keys: current key 128 as expected
> ok 66 client: Rotate over all different keys: rnext key 128 as expected
> ok 67 server: Rotate over all different keys: current key 129 as expected
> ok 68 client: Rotate over all different keys: rnext key 129 as expected
> ok 69 server: Rotate over all different keys: current key 130 as expected
> ok 70 client: Rotate over all different keys: rnext key 130 as expected
> ok 71 server: Rotate over all different keys: current key 131 as expected
> ok 72 client: Rotate over all different keys: rnext key 131 as expected
> ok 73 server: Rotate over all different keys: current key 132 as expected
> ok 74 client: Rotate over all different keys: rnext key 132 as expected
> ok 75 server: Rotate over all different keys: current key 133 as expected
> ok 76 client: Rotate over all different keys: rnext key 133 as expected
> ok 77 server: Rotate over all different keys: current key 134 as expected
> ok 78 client: Rotate over all different keys: rnext key 134 as expected
> ok 79 server: Rotate over all different keys: current key 135 as expected
> ok 80 client: Rotate over all different keys: rnext key 135 as expected
> ok 81 server: Rotate over all different keys: current key 136 as expected
> ok 82 client: Rotate over all different keys: rnext key 136 as expected
> ok 83 server: Rotate over all different keys: current key 137 as expected
> ok 84 client: Rotate over all different keys: rnext key 137 as expected
> ok 85 server: Rotate over all different keys: current key 138 as expected
> ok 86 client: Rotate over all different keys: rnext key 138 as expected
> ok 87 server: Rotate over all different keys: current key 139 as expected
> ok 88 client: Rotate over all different keys: rnext key 139 as expected
> ok 89 server: Rotate over all different keys: current key 140 as expected
> ok 90 client: Rotate over all different keys: rnext key 140 as expected
> ok 91 server: Rotate over all different keys: current key 141 as expected
> ok 92 client: Rotate over all different keys: rnext key 141 as expected
> ok 93 server: Rotate over all different keys: current key 142 as expected
> ok 94 client: Rotate over all different keys: rnext key 142 as expected
> ok 95 server: Rotate over all different keys: current key 143 as expected
> ok 96 client: Rotate over all different keys: rnext key 143 as expected
> ok 97 server: Rotate over all different keys: current key 144 as expected
> ok 98 client: Rotate over all different keys: rnext key 144 as expected
> ok 99 server: Rotate over all different keys: current key 145 as expected
> ok 100 client: Rotate over all different keys: rnext key 145 as expected
> ok 101 server: Rotate over all different keys: current key 146 as expected
> ok 102 client: Rotate over all different keys: rnext key 146 as expected
> ok 103 server: Rotate over all different keys: current key 127 as expected
> ok 104 client: Rotate over all different keys: rnext key 127 as expected
> ok 105 client: Rotate over all different keys: current key 0 as expected
> ok 106 client: Rotate over all different keys: rnext key 127 as expected
> ok 107 server: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 108 client: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 109 client: Rotate over all different keys: passed counters checks
> ok 110 server: Rotate over all different keys: passed counters checks
> ok 111 server: Check accept() => established key matching: The socket keys are consistent with the expectations
> ok 112 Can't add a key with non-matching ip-address for established sk
> ok 113 Can't add a key with non-matching VRF for established sk
> ok 114 server: Check accept() => established key matching: server alive
> ok 115 server: Check accept() => established key matching: passed counters checks
> ok 116 client: Check connect() => established key matching: current key 0 as expected
> ok 117 client: Check connect() => established key matching: rnext key 128 as expected
> ok 118 client: Check connect() => established key matching: The socket keys are consistent with the expectations
> ok 119 server: Check accept() => established key matching: The socket keys are consistent with the expectations
> ok 120 server: Check accept() => established key matching: passed counters checks
> # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that a rare functionality of TCP named self-connect works with
TCP-AO. This "under the cover" also checks TCP simultaneous connect
(TCP_SYN_RECV socket state), which would be harder to check other ways.
In order to verify that it's indeed TCP simultaneous connect, check
the counters TCPChallengeACK and TCPSYNChallenge.
Sample of the output:
> # ./self-connect_ipv6
> 1..4
> # 1738[lib/setup.c:254] rand seed 1696451931
> TAP version 13
> ok 1 self-connect(same keyids): connect TCPAOGood 0 => 24
> ok 2 self-connect(different keyids): connect TCPAOGood 26 => 50
> ok 3 self-connect(restore): connect TCPAOGood 52 => 97
> ok 4 self-connect(restore, different keyids): connect TCPAOGood 99 => 144
> # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that both active and passive reset works and correctly sign
segments with TCP-AO or don't send RSTs if not possible to sign.
A listening socket with backlog = 0 gets one connection in accept
queue, another in syn queue. Once the server/listener socket is
forcibly closed, client sockets aren't connected to anything.
In regular situation they would receive RST on any segment, but
with TCP-AO as there's no listener, no AO-key and unknown ISNs,
no RST should be sent.
And "passive" reset, where RST is sent on reply for some segment
(tcp_v{4,6}_send_reset()) - there use TCP_REPAIR to corrupt SEQ numbers,
which later results in TCP-AO signed RST, which will be verified and
client socket will get EPIPE.
No TCPAORequired/TCPAOBad segments are expected during these tests.
Sample of the output:
> # ./rst_ipv4
> 1..15
> # 1462[lib/setup.c:254] rand seed 1686611171
> TAP version 13
> ok 1 servered 1000 bytes
> ok 2 Verified established tcp connection
> ok 3 sk[0] = 7, connection was reset
> ok 4 sk[1] = 8, connection was reset
> ok 5 sk[2] = 9
> ok 6 MKT counters are good on server
> ok 7 Verified established tcp connection
> ok 8 client connection broken post-seq-adjust
> ok 9 client connection was reset
> ok 10 No segments without AO sign (server)
> ok 11 Signed AO segments (server): 0 => 30
> ok 12 No segments with bad AO sign (server)
> ok 13 No segments without AO sign (client)
> ok 14 Signed AO segments (client): 0 => 30
> ok 15 No segments with bad AO sign (client)
> # Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that on SEQ number wraparound there is no disruption or TCPAOBad
segments produced.
Sample of expected output:
> # ./seq-ext_ipv4
> 1..7
> # 1436[lib/setup.c:254] rand seed 1686611079
> TAP version 13
> ok 1 server alive
> ok 2 post-migrate connection alive
> ok 3 TCPAOGood counter increased 1002 => 3002
> ok 4 TCPAOGood counter increased 1003 => 3003
> ok 5 TCPAOBad counter didn't increase
> ok 6 TCPAOBad counter didn't increase
> ok 7 SEQ extension incremented: 1/1999, 1/998999
> # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test plan is:
1. check that TCP-AO connection may be restored on another socket
2. check restore with wrong send/recv ISN (checking that they are
part of MAC generation)
3. check restore with wrong SEQ number extension (checking that
high bytes of it taken into MAC generation)
Sample output expected:
> # ./restore_ipv4
> 1..20
> # 1412[lib/setup.c:254] rand seed 1686610825
> TAP version 13
> ok 1 TCP-AO migrate to another socket: server alive
> ok 2 TCP-AO migrate to another socket: post-migrate connection is alive
> ok 3 TCP-AO migrate to another socket: counter TCPAOGood increased 23 => 44
> ok 4 TCP-AO migrate to another socket: counter TCPAOGood increased 22 => 42
> ok 5 TCP-AO with wrong send ISN: server couldn't serve
> ok 6 TCP-AO with wrong send ISN: post-migrate connection is broken
> ok 7 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 4
> ok 8 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 3
> ok 9 TCP-AO with wrong receive ISN: server couldn't serve
> ok 10 TCP-AO with wrong receive ISN: post-migrate connection is broken
> ok 11 TCP-AO with wrong receive ISN: counter TCPAOBad increased 4 => 8
> ok 12 TCP-AO with wrong receive ISN: counter TCPAOBad increased 5 => 10
> ok 13 TCP-AO with wrong send SEQ ext number: server couldn't serve
> ok 14 TCP-AO with wrong send SEQ ext number: post-migrate connection is broken
> ok 15 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 9 => 10
> ok 16 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 11 => 19
> ok 17 TCP-AO with wrong receive SEQ ext number: post-migrate connection is broken
> ok 18 TCP-AO with wrong receive SEQ ext number: server couldn't serve
> ok 19 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 10 => 18
> ok 20 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 20 => 23
> # Totals: pass:20 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test plan was (most of tests have all 3 client types):
1. TCP-AO listen (INADDR_ANY)
2. TCP-MD5 listen (INADDR_ANY)
3. non-signed listen (INADDR_ANY)
4. TCP-AO + TCP-MD5 listen (prefix)
5. TCP-AO subprefix add failure [checked in setsockopt-closed.c]
6. TCP-AO out of prefix connect [checked in connect-deny.c]
7. TCP-AO + TCP-MD5 on connect()
8. TCP-AO intersect with TCP-MD5 failure
9. Established TCP-AO: add TCP-MD5 key
10. Established TCP-MD5: add TCP-AO key
11. Established non-signed: add TCP-AO key
Output produced:
> # ./unsigned-md5_ipv6
> 1..72
> # 1592[lib/setup.c:239] rand seed 1697567046
> TAP version 13
> ok 1 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2
> ok 2 AO server (INADDR_ANY): AO client: connected
> ok 3 AO server (INADDR_ANY): MD5 client
> ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1
> ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1
> ok 6 AO server (INADDR_ANY): unsigned client
> ok 7 AO server (AO_REQUIRED): AO client: connected
> ok 8 AO server (AO_REQUIRED): AO client: counter TCPAOGood increased 4 => 6
> ok 9 AO server (AO_REQUIRED): unsigned client
> ok 10 AO server (AO_REQUIRED): unsigned client: counter TCPAORequired increased 1 => 2
> ok 11 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1
> ok 12 MD5 server (INADDR_ANY): AO client
> ok 13 MD5 server (INADDR_ANY): MD5 client: connected
> ok 14 MD5 server (INADDR_ANY): MD5 client: no counter checks
> ok 15 MD5 server (INADDR_ANY): no sign client
> ok 16 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1
> ok 17 no sign server: AO client
> ok 18 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2
> ok 19 no sign server: MD5 client
> ok 20 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2
> ok 21 no sign server: no sign client: connected
> ok 22 no sign server: no sign client: counter CurrEstab increased 0 => 1
> ok 23 AO+MD5 server: AO client (matching): connected
> ok 24 AO+MD5 server: AO client (matching): counter TCPAOGood increased 8 => 10
> ok 25 AO+MD5 server: AO client (misconfig, matching MD5)
> ok 26 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3
> ok 27 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4
> ok 28 AO+MD5 server: AO client (misconfig, non-matching)
> ok 29 AO+MD5 server: MD5 client (matching): connected
> ok 30 AO+MD5 server: MD5 client (matching): no counter checks
> ok 31 AO+MD5 server: MD5 client (misconfig, matching AO)
> ok 32 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3
> ok 33 AO+MD5 server: MD5 client (misconfig, non-matching)
> ok 34 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4
> ok 35 AO+MD5 server: no sign client (unmatched): connected
> ok 36 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1
> ok 37 AO+MD5 server: no sign client (misconfig, matching AO)
> ok 38 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 2 => 3
> ok 39 AO+MD5 server: no sign client (misconfig, matching MD5)
> ok 40 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2
> ok 41 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented
> ok 42 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: no counter checks
> ok 43 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented
> ok 44 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: no counter checks
> ok 45 TCP-AO established: add TCP-MD5 key: postfailed as expected
> ok 46 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 12 => 14
> ok 47 TCP-MD5 established: add TCP-AO key: postfailed as expected
> ok 48 TCP-MD5 established: add TCP-AO key: no counter checks
> ok 49 non-signed established: add TCP-AO key: postfailed as expected
> ok 50 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1
> ok 51 TCP-AO key intersects with existing TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 52 TCP-MD5 key intersects with existing TCP-AO key: prefailed as expected: Key was rejected by service
> ok 53 TCP-MD5 key + TCP-AO required: prefailed as expected: Key was rejected by service
> ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 55 VRF: TCP-AO key (no l3index) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 56 VRF: TCP-MD5 key (no l3index) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 57 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 58 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 59 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 60 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 61 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 62 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 63 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 64 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 65 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=N)
> ok 66 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=0)
> ok 67 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 68 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> ok 69 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=0)
> ok 70 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=N)
> ok 71 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 72 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> # Totals: pass:72 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify corner-cases for UAPI.
Sample output:
> # ./setsockopt-closed_ipv4
> 1..120
> # 1657[lib/setup.c:254] rand seed 1681938184
> TAP version 13
> ok 1 AO add: minimum size
> ok 2 AO add: extended size
> ok 3 AO add: null optval
> ok 4 AO del: minimum size
> ok 5 AO del: extended size
> ok 6 AO del: null optval
> ok 7 AO set info: minimum size
> ok 8 AO set info: extended size
> ok 9 AO info get: : extended size
> ok 10 AO set info: null optval
> ok 11 AO get info: minimum size
> ok 12 AO get info: extended size
> ok 13 AO get info: null optval
> ok 14 AO get info: null optlen
> ok 15 AO get keys: minimum size
> ok 16 AO get keys: extended size
> ok 17 AO get keys: null optval
> ok 18 AO get keys: null optlen
> ok 19 key add: too big keylen
> ok 20 key add: using reserved padding
> ok 21 key add: using reserved2 padding
> ok 22 key add: wrong address family
> ok 23 key add: port (unsupported)
> ok 24 key add: no prefix, addr
> ok 25 key add: no prefix, any addr
> ok 26 key add: prefix, any addr
> ok 27 key add: too big prefix
> ok 28 key add: too short prefix
> ok 29 key add: bad key flags
> ok 30 key add: add current key on a listen socket
> ok 31 key add: add rnext key on a listen socket
> ok 32 key add: add current+rnext key on a listen socket
> ok 33 key add: add key and set as current
> ok 34 key add: add key and set as rnext
> ok 35 key add: add key and set as current+rnext
> ok 36 key add: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 37 key add: non-existent VRF
> ok 38 optmem limit was hit on adding 69 key
> ok 39 key add: maclen bigger than TCP hdr
> ok 40 key add: bad algo
> ok 41 key del: using reserved padding
> ok 42 key del: using reserved2 padding
> ok 43 key del: del and set current key on a listen socket
> ok 44 key del: del and set rnext key on a listen socket
> ok 45 key del: del and set current+rnext key on a listen socket
> ok 46 key del: bad key flags
> ok 47 key del: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 48 key del: non-existent VRF
> ok 49 key del: set non-exising current key
> ok 50 key del: set non-existing rnext key
> ok 51 key del: set non-existing current+rnext key
> ok 52 key del: set current key
> ok 53 key del: set rnext key
> ok 54 key del: set current+rnext key
> ok 55 key del: set as current key to be removed
> ok 56 key del: set as rnext key to be removed
> ok 57 key del: set as current+rnext key to be removed
> ok 58 key del: async on non-listen
> ok 59 key del: non-existing sndid
> ok 60 key del: non-existing rcvid
> ok 61 key del: incorrect addr
> ok 62 key del: correct key delete
> ok 63 AO info set: set current key on a listen socket
> ok 64 AO info set: set rnext key on a listen socket
> ok 65 AO info set: set current+rnext key on a listen socket
> ok 66 AO info set: using reserved padding
> ok 67 AO info set: using reserved2 padding
> ok 68 AO info set: accept_icmps
> ok 69 AO info get: accept_icmps
> ok 70 AO info set: ao required
> ok 71 AO info get: ao required
> ok 72 AO info set: ao required with MD5 key
> ok 73 AO info set: set non-existing current key
> ok 74 AO info set: set non-existing rnext key
> ok 75 AO info set: set non-existing current+rnext key
> ok 76 AO info set: set current key
> ok 77 AO info get: set current key
> ok 78 AO info set: set rnext key
> ok 79 AO info get: set rnext key
> ok 80 AO info set: set current+rnext key
> ok 81 AO info get: set current+rnext key
> ok 82 AO info set: set counters
> ok 83 AO info get: set counters
> ok 84 AO info set: no-op
> ok 85 AO info get: no-op
> ok 86 get keys: no ao_info
> ok 87 get keys: proper tcp_ao_get_mkts()
> ok 88 get keys: set out-only pkt_good counter
> ok 89 get keys: set out-only pkt_bad counter
> ok 90 get keys: bad keyflags
> ok 91 get keys: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 92 get keys: using reserved field
> ok 93 get keys: no prefix, addr
> ok 94 get keys: no prefix, any addr
> ok 95 get keys: prefix, any addr
> ok 96 get keys: too big prefix
> ok 97 get keys: too short prefix
> ok 98 get keys: prefix + addr
> ok 99 get keys: get_all + prefix
> ok 100 get keys: get_all + addr
> ok 101 get keys: get_all + sndid
> ok 102 get keys: get_all + rcvid
> ok 103 get keys: current + prefix
> ok 104 get keys: current + addr
> ok 105 get keys: current + sndid
> ok 106 get keys: current + rcvid
> ok 107 get keys: rnext + prefix
> ok 108 get keys: rnext + addr
> ok 109 get keys: rnext + sndid
> ok 110 get keys: rnext + rcvid
> ok 111 get keys: get_all + current
> ok 112 get keys: get_all + rnext
> ok 113 get keys: current + rnext
> ok 114 key add: duplicate: full copy
> ok 115 key add: duplicate: any addr key on the socket
> ok 116 key add: duplicate: add any addr key
> ok 117 key add: duplicate: add any addr for the same subnet
> ok 118 key add: duplicate: full copy of a key
> ok 119 key add: duplicate: RecvID differs
> ok 120 key add: duplicate: SendID differs
> # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide functions to create selftests dedicated to TCP-AO.
They can run in parallel, as they use temporary net namespaces.
They can be very specific to the feature being tested.
This will allow to create a lot of TCP-AO tests, without complicating
one binary with many --options and to create scenarios, that are
hard to put in bash script that uses one binary.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Temporarily disable dummy_struct_ops test on s390.
The breakage is likely due to
commit 2cd3e3772e ("x86/cfi,bpf: Fix bpf_struct_ops CFI").
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If an abnormally huge cnt is used for multi-kprobes attachment, the
following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 392 at mm/util.c:632 kvmalloc_node+0xd9/0xe0
Modules linked in: bpf_testmod(O)
CPU: 1 PID: 392 Comm: test_progs Tainted: G ...... 6.7.0-rc3+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
......
RIP: 0010:kvmalloc_node+0xd9/0xe0
? __warn+0x89/0x150
? kvmalloc_node+0xd9/0xe0
bpf_kprobe_multi_link_attach+0x87/0x670
__sys_bpf+0x2a28/0x2bc0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7fbe067f0e0d
......
</TASK>
---[ end trace 0000000000000000 ]---
So add a test to ensure the warning is fixed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231215100708.2265609-6-houtao@huaweicloud.com
Since libbpf v1.0, libbpf doesn't return error code embedded into the
pointer iteself, libbpf_get_error() is deprecated and it is basically
the same as using -errno directly.
So replace the invocations of libbpf_get_error() by -errno in
kprobe_multi_test. For libbpf_get_error() in test_attach_api_fails(),
saving -errno before invoking ASSERT_xx() macros just in case that
errno is overwritten by these macros. However, the invocation of
libbpf_get_error() in get_syms() should be kept intact, because
hashmap__new() still returns a pointer with embedded error code.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231215100708.2265609-5-houtao@huaweicloud.com
If an abnormally huge cnt is used for multi-uprobes attachment, the
following warning will be reported:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 406 at mm/util.c:632 kvmalloc_node+0xd9/0xe0
Modules linked in: bpf_testmod(O)
CPU: 7 PID: 406 Comm: test_progs Tainted: G ...... 6.7.0-rc3+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:kvmalloc_node+0xd9/0xe0
......
Call Trace:
<TASK>
? __warn+0x89/0x150
? kvmalloc_node+0xd9/0xe0
bpf_uprobe_multi_link_attach+0x14a/0x480
__sys_bpf+0x14a9/0x2bc0
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
......
</TASK>
---[ end trace 0000000000000000 ]---
So add a test to ensure the warning is fixed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231215100708.2265609-4-houtao@huaweicloud.com
Validate the operation of rx and tx histogram counters, if supported
by the interface, by sending batches of packets targeted for each
bucket.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/proc/sys/net/core/optmem_max is now per netns, change two tests
that were saving/changing/restoring its value on the parent netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both tests are almost same, only differs in two 'if' conditions, so
implemented in a single function. Tests check, that credit update
message is sent:
1) During setting SO_RCVLOWAT value of the socket.
2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./fdb_flush.sh
TEST: vx10: Expected 5 FDB entries, got 5 [ OK ]
TEST: vx20: Expected 5 FDB entries, got 5 [ OK ]
...
TEST: vx10: Expected 5 FDB entries, got 5 [ OK ]
TEST: Test entries with dst 192.0.2.1 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-14-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
# ./fib_tests.sh
Single path route test
Start point
TEST: IPv4 fibmatch [ OK ]
...
Fib6 garbage collection test
TEST: ipv6 route garbage collection [ OK ]
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
Tests passed: 225
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-13-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_rule_tests.sh
TEST: rule6 check: oif redirect to table [ OK ]
...
TEST: rule4 dsfield tcp connect (dsfield 0x07) [ OK ]
Tests passed: 66
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-12-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove PEER_CMD, which is not used in this test
Here is the test result after conversion.
]# ./fib-onlink-tests.sh
Error: ipv4: FIB table does not exist.
Flush terminated
Error: ipv6: FIB table does not exist.
Flush terminated
########################################
Configuring interfaces
...
TEST: Gateway resolves to wrong nexthop device - VRF [ OK ]
Tests passed: 38
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-11-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthops.sh
Basic functional tests
----------------------
TEST: List with nothing defined [ OK ]
TEST: Nexthop get on non-existent id [ OK ]
...
TEST: IPv6 resilient nexthop group torture test [ OK ]
Tests passed: 234
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-10-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthop_nongw.sh
TEST: nexthop: get route with nexthop without gw [ OK ]
TEST: nexthop: ping through nexthop without gw [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-9-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-8-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running fib_nexthop_multiprefix test I saw all IPv6 test failed.
e.g.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL]
With -v it shows
COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1
PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes
From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300
--- 2001:db8:101::1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
Route get
2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium
Searching for:
2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300
The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will
not put RTA_SRC info. After fix:
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
Fixes: 735ab2f65d ("selftests: Add test with multiple prefixes using single nexthop")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the test result after conversion. There are some failures, but it
also exists on my system without this patch. So it's not affectec by
this patch and I will check the reason later.
]# time ./fcnal-test.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
IPv4 ping
###########################################################################
#################################################################
No VRF
SYSCTL: net.ipv4.raw_l3mdev_accept=0
TEST: ping out - ns-B IP [ OK ]
TEST: ping out, device bind - ns-B IP [ OK ]
TEST: ping out, address bind - ns-B IP [ OK ]
...
#################################################################
SNAT on VRF
TEST: IPv4 TCP connection over VRF with SNAT [ OK ]
TEST: IPv6 TCP connection over VRF with SNAT [ OK ]
Tests passed: 893
Tests failed: 21
real 52m48.178s
user 0m34.158s
sys 1m42.976s
BTW, this test needs a really long time. So expand the timeout to 1h.
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-6-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt6_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt4_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt46_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: IPv4 Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 34
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a global variable NS_LIST to store all the namespaces that setup_ns
created, so the caller could call cleanup_all_ns() instead of remember
all the netns names when using cleanup_ns().
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We avoid printing forward declarations and prototypes for most
types by sorting things topologically. But if structs nest we
do need the forward declarations, there's no other way.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid infinite nesting store recursive structs by pointer.
If recursive struct is placed in the op directly - the first
instance can be stored by value. That makes the code much
less of a pain for majority of practical uses.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We try to keep the structures and helpers "topologically sorted",
to avoid forward declarations. When recursive nests are at play
we need to sort twice, because structs which end up being marked
as recursive will get a full set of forward declarations, so we
should ignore them for the purpose of sorting.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
