These two were using a fw dance logic where posting read was done
after both domain bit were set. When in other gens, the posting
read is done immediately after setting the forcewake bit for each
domain.
Now bring these in line with other gens.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we now have forcewake domains, take advantage of it
by putting the differences in gen fw handling in data rather
than in code.
In past we have opencoded this quite extensively as the fw handling
is in the fast path. There has also been a lot of cargo-culted
copy'n'pasting from older gens to newer ones.
Now when the releasing of the forcewake is done by deferred timer,
it gives chance to consolidate more. Due to the frequency of actual hw
access being significantly less.
Take advantage of this and generalize the fw handling code
as much as possible. But we still aim to keep the forcewake sequence
particularities for each gen intact. So the access pattern
to fw engines should remain the same.
v2: - s/old_ack/clear_ack (Chris)
- s/post_read/posting_read (Chris)
- less polite commit msg (Chris)
v3: - rebase
- check and clear wake_count in init
v4: - fix posting reads for gen8 (PRTS)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Introduce a structure to track the individual forcewake domains and use
that to eliminate duplicate logic.
v2: - Rebase on latest dinq (Mika)
- for_each_fw_domain macro (Mika)
- Handle reset atomically, keeping the timer running (Mika)
- for_each_fw_domain parameter ordering (Chris)
- defer timer on new register access (Mika)
v3: - Fix forcewake_reset/get race by waiting pending timers
v4: - cond_resched and verbose warning on timer deletion (Chris)
- need to run pending timers manually on reset
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With gen < 6 we don't need to take uncore lock as we
don't have anything to protect from concurrent access.
v2: rebase and account for gen9 changes
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On user forcewake access, assert that runtime pm reference is held.
Fix and cleanup the callsites accordingly.
v2: Remove intel_runtime_pm_get() rebasehap (Deepak)
v3: use drivers own runtime state tracking as pm_runtime_active()
will return wrong results when we are in resume callchain (Mika)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Calling intel_runtime_pm_put() is illegal from a soft-irq context, so
revert the crude hack
commit aa0b3b5bb8
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Tue Apr 1 14:55:07 2014 -0300
drm/i915: don't schedule force_wake_timer at gen6_read
and apply the single line corrective instead.
v2: assert forcewake is off after the forcewake_reset (Paulo)
References: https://bugs.freedesktop.org/show_bug.cgi?id=80913
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move all remaining elements that were unique to execlists queue items
in to the associated request.
Issue: VIZ-4274
v2: Rebase. Fixed issue of overzealous freeing of request.
v3: Removed re-addition of cleanup work queue (found by Daniel Vetter)
v4: Rebase.
v5: Actual removal of intel_ctx_submit_request. Update both tail and postfix
pointer in __i915_add_request (found by Thomas Daniel)
v6: Removed unrelated changes
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
[danvet: Reformat comment with strange linebreaks.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The first pass implementation of execlists required a backpointer to the context to be held
in the intel_ringbuffer. However the context pointer is available higher in the call stack.
Remove the backpointer from the ring buffer structure and instead pass it down through the
call stack.
v2: Integrate this changeset with the removal of duplicate request/execlist queue item members.
v3: Rebase
v4: Rebase. Remove passing of context when the request is passed.
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Where there were duplicate variables for the tail, context and ring (engine)
in the gem request and the execlist queue item, use the one from the request
and remove the duplicate from the execlist queue item.
Issue: VIZ-4274
v1: Rebase
v2: Fixed build issues. Keep separate postfix & tail pointers as these are
used in different ways. Reinserted missing full tail pointer update.
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a reference and pointer from the execlist queue item to the associated
gem request. For execlist requests that don't have a request, create one
as a placeholder.
Issue: VIZ-4274
v1: Rebase after upstream of "Replace seqno values with request structures" patchset.
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So that atomic operations will reference the right crtc state.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The previous patch changed the config field in intel_crtc to a pointer,
but to keep the mechanical changes (done with spatch) separate from the
new code, the pointer was made to point to a new _config field with type
struct intel_crtc_state added to that struct. This patch improves that
code by getting rid of that field, allocating a state struct in
intel_crtc_init() a keeping it properly updated when a mode set
happens.
v2: Manual changes split from previous patch. (Matt)
Don't leak the current state when the crtc is destroyed (Matt)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[danvet: Squash in fixup from Matt Roper for driver unload.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To match the semantics of drm_crtc->state, which this will eventually
become. The allocation of the memory for config will be fixed in a
followup patch. By adding the extra _config field to intel_crtc it was
possible to generate this entire patch with the cocci script below.
@@ @@
struct intel_crtc {
...
-struct intel_crtc_state config;
+struct intel_crtc_state _config;
+struct intel_crtc_state *config;
...
}
@@ struct intel_crtc *crtc; @@
-memset(&crtc->config, 0, sizeof(crtc->config));
+memset(crtc->config, 0, sizeof(*crtc->config));
@@ @@
__intel_set_mode(...) {
<...
-to_intel_crtc(crtc)->config = *pipe_config;
+(*(to_intel_crtc(crtc)->config)) = *pipe_config;
...>
}
@@ @@
intel_crtc_init(...) {
...
WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
+intel_crtc->config = &intel_crtc->_config;
return;
...
}
@@ struct intel_crtc *crtc; @@
-&crtc->config
+crtc->config
@@ struct intel_crtc *crtc; identifier member; @@
-crtc->config.member
+crtc->config->member
@@ expression E; @@
-&(to_intel_crtc(E)->config)
+to_intel_crtc(E)->config
@@ expression E; identifier member; @@
-to_intel_crtc(E)->config.member
+to_intel_crtc(E)->config->member
v2: Clarify manual changes by splitting them into another patch. (Matt)
Improve cocci script to generate even more of the changes. (Ander)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In functions that define a local pipe_config variable to point to
crtc->config, replace remaining references to crtc->config with
the local variable. This makes the code more consistent and easier
to change in an automated manner.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reduces the number of direct users of crtc->new_config, opening up
the possibilty of removing it altogether.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The objective is to make this structure usable with the atomic helpers,
so let's start with the rename. Patch generated with coccinelle:
@@ @@
-struct intel_crtc_config {
+struct intel_crtc_state {
...
}
@@ @@
-struct intel_crtc_config
+struct intel_crtc_state
v2: Completely generate the patch with cocci. (Ander)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Earlier, DRRS structures were specific to eDP (used only in intel_dp).
Since DRRS can be extended to other internal display types
(if the panel supports multiple RR), modifying structures
to be part of drm_i915_private and have a provision to add display related
structs like intel_dp.
Also, aligning with frontbuffer tracking mechanism, the new structure
contains data for busy frontbuffer bits.
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On VLV/CHV the rc6 residency calculations read a second register to
determine the actual units used for the residency value. The variable
name 'reg' where that register value is stored shadows the function
argument 'reg'. That can easily leave the reader utterly confused, so
rename the internal variable to 'clk_reg'.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
[danvet: Spellfix in commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't register the rc6p and rc6pp sysfs files on VLV, so there's no
point in having any VLV checks in them. Drop the checks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The performance regression from the CHV RC6 EI->TO change is now fixed
so re-enable TO mode for better RC6 resicency.
This reverts commit e85a5c7989.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
CherryViewA0_iGfx_BIOS_DRIVER_PUNIT_spec_y14w28d5 tells us not to enable
the RP down timeout interrupt, and says that the timeout value is hence
not used. We do enable that interrupt currently though, so leaving the
timeout as 0 results in very poor performance as the GPU frequency keeps
dropping constantly. So just program the register with the recommended
value.
Leaving the interrupt enabled doesn't seem to do any harm so far. So
I've decided to leave it on for now, just to avoid making CHV a
special case.
This fixes the performance regression from:
commit 5a0afd4b78
Author: Deepak S <deepak.s@linux.intel.com>
Date: Sat Dec 13 11:43:27 2014 +0530
drm/i915/chv: Use timeout mode for RC6 on chv
Cc: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We use decimal for all the other RP magic values, so change
GEN6_RP_DOWN_TIMEOUT to decimal as well. Also change the order
of the register writes to match the BIOS spec for easier verification.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Follow the sequence in the BIOS spec and clear the RC_CONTROL register
before changing any of the other RC6/RP registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use new Sideband offset to read max/min/gaur freq based on the SKU it
is running on. Based on the Number of EU, we read different bits to
identify the max frequencies at which system can run.
v2: reuse mask definitions & INTEL_INFO() to get device info (Ville)
v3: add break in switch conditions (Ville)
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Looks like latest BSW/CHV production system has sideband address > 128.
Use u32 data types to cover new offset/address range :)
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Starting with Cherryview, devices may have a varying number of EU for
a given ID due to creative fusing. Punit support different frequency for
different fuse data. We use this patch to help get total eu enabled and
read the right offset to get RP0
Based upon a patch from Jeff, but reworked to only store eu_total and
avoid sending info to userspace
v2: Format register definitions (Jani)
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Acked-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we transitioned to the atomic plane helpers in commit:
commit ea2c67bb4a
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Tue Dec 23 10:41:52 2014 -0800
drm/i915: Move to atomic plane helpers (v9)
one of the changes was to call intel_plane_destroy_state() while tearing
down a plane to prevent leaks when unloading the driver. That made
sense when the patches were first written, but before they were merged,
commit 3009c0377f
Author: Thierry Reding <treding@nvidia.com>
Date: Tue Nov 25 12:09:49 2014 +0100
drm: Free atomic state during cleanup
had already landed, which made this the responsibility of the DRM core.
The result was that we were kfree()'ing the state twice, and also
possibly double-unref'ing a framebuffer, leading to memory corruption
when the driver was unloaded.
The fix is to simply not try to cleanup the state in the i915 teardown
code now that the core handles this for us.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88433
Testcase: igt/drv_module_reload
Root-cause-analysis-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The rotation property is shared by multiple drivers, so it makes sense
to store the rotation value (for atomic-converted drivers) in the common
plane state so that core code can eventually access it as well.
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Suspend/resume regression fix for 3.19.
* 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Remove rdev->gart.pages_addr array
drm/radeon: Restore GART table contents after pinning it in VRAM v3
drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entry
A couple of fixes for -rc7 in amdkfd:
- Forgot to free resources when creation of queue has failed
- Initialization of pipelines was incorrect (3 patches)
In addition, The patch "drm/amdkfd: Allow user to limit only queues per device"
is not a fix, but I would like to push it for 3.19 as it changes the ABI
between amdkfd and userspace (by changing the module parameters). I would
prefer *not* to support the two deprecated module parameters if I don't have
too, as amdkfd hasn't been released yet.
* tag 'drm-amdkfd-fixes-2015-01-26' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Fix bug in call to init_pipelines()
drm/amdkfd: Fix bug in pipelines initialization
drm/radeon: Don't increment pipe_id in kgd_init_pipeline
drm/amdkfd: Allow user to limit only queues per device
drm/amdkfd: PQM handle queue creation fault
Radeon drm-next changes for 3.20. Highlights:
- Indirect draw support for evergreen/NI hw
- SMC fan control support for SI/CI
- Manual fan control for SI/CI
- DP audio support
- Lots of code cleanup
* 'drm-next-3.20' of git://people.freedesktop.org/~agd5f/linux: (45 commits)
drm/radeon: make MMU_NOTIFIER optional
drm/radeon: use NULL rather then 0 in audio detect
drm/radeon: whitespace clean up in radeon_audio.c
radeon/audio: enable DP audio
radeon/audio: moved audio caps programming to audio_hotplug() function
radeon/audio: applied audio_dpms() and audio_mode_set() calls
radeon/audio: consolidate audio_mode_set() functions
radeon/audio: removed unnecessary debug settings
radeon/audio: moved mute programming to a separate function
radeon/audio: moved audio packet programming to a separate function
radeon/audio: set_avi_packet() function cleanup
radeon/audio: removed unnecessary CRC control programing
radeon: moved HDMI color depth programming to a separate function
radeon/audio: moved VBI packet programming to separate functions
radeon/audio: consolidate update_acr() functions (v2)
radeon/audio: consolidate update_avi_infoframe() functions
radeon/audio: consolidate audio_set_dto() functions
radeon/audio: consolidate audio_fini() functions
radeon/audio: consolidate audio_enable() functions
radeon/audio: consolidate select_pin() functions
...
This pull request includes some code refactoring which removes
Exynos specific structure names and uses generic structure
names instead, and makes all plane updating to be done
by only exynos_update_plane function. And also it includes
some cleanup and fixup patches.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (22 commits)
drm/exynos: fimd: check error status for drm_iommu_attach_device
drm/exynos: create exynos_check_plane()
drm/exynos: remove mode_set() ops from exynos_crtc
drm/exynos: don't duplicate drm_display_mode in fimd context
drm/exynos: remove struct exynos_drm_manager
drm/exynos: remove drm_dev from struct exynos_drm_manager
drm/exynos: move 'type' from manager to crtc struct
drm/exynos: remove pipe member of struct exynos_drm_manager
drm/exynos: add pipe param to exynos_drm_crtc_create()
drm/exynos: rename base object of struct exynos_drm_crtc to 'base'
drm/exynos: remove exynos_drm_crtc_mode_set_commit()
drm/exynos: call exynos_update_plane() directly on page flips
drm/exynos: unify plane update on exynos_update_plane()
drm/exynos: remove exynos_plane_commit() wrapper
drm/exynos: don't do any DPMS operation while updating planes
drm/exynos: Don't touch DPMS when updating overlay planes
drm/exynos/vidi: remove useless ops->commit()
drm/exynos/fimd: don't initialize 'ret' variable in fimd_probe()
drm/exynos: remove struct exynos_drm_overlay
drm/exynos: remove exynos_drm_crtc_plane_* wrappers
...
Here is a pull request of fixes for 3.20 patches, including the fix you asked
me when you merged the previous pull request.
* tag 'drm-amdkfd-next-fixes-2015-01-25' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: change amdkfd version to 0.7.1
drm/radeon: cik_sdma_ctx_switch_enable() can be static
drm/amdkfd: Fix sparse errors
drm/amdkfd: Handle case of invalid queue type
drm/amdkfd: Add break at the end of case
drm/amdkfd: Remove negative check of uint variable
3 fixes for the tda998x.
* 'drm-tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: set the CEC I2C address based on the slave I2C address
drm: tda998x: Fix EDID read timeout on HDMI connect
drm: tda998x: Protect the page register
formats and num_formats arguments were previously called fmts and nfmts.
Fix the kernel doc comment so that it matches the new argument names.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over
* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
drm/i915: Update DRIVER_DATE to 20150117
i915: reuse %ph to dump small buffers
drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
drm/i915: PSR link standby at debugfs
drm/i915: group link_standby setup and let this info visible everywhere.
drm/i915: Add missing vbt check.
drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
drm/i915: Fix kerneldoc for i915 atomic plane code
drm/i915: Don't pretend SDVO hotplug works on 915
drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
drm/i915: Make hpd arrays big enough to avoid out of bounds access
Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
drm/i915: Improve HiZ throughput on Cherryview.
drm/i915: Reset CSB read pointer in ring init
drm/i915: Drop unused position fields (v2)
drm/i915: Move to atomic plane helpers (v9)
...
Just flushing out my drm-misc branch, nothing major. Well too old patches
I've dug out from years since a patch from Rob look eerily familiar ;-)
* tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel:
drm/probe-helper: clamp unknown connector status in the poll work
drm/probe-helper: don't lose hotplug event
next: drm/atomic: Use copy_from_user to copy 64 bit data from user space
drm: Make drm_read() more robust against multithreaded races
drm/fb-helper: Propagate errors from initial config failure
drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"
BDW with PCI-IDs ended in "2" aren't ULT, but HALO.
Let's fix it and at least allow VGA to work on this units.
v2: forgot ammend and v1 doesn't compile
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87220
Cc: Xion Zhang <xiong.y.zhang@intel.com>
Cc: Guo Jinxian <jinxianx.guo@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It seems in the past we have BDW with PCH not been propperly identified
and we force it to be LPT and we were warning !IS_HASWELL on propper identification.
Now that products are out there we are receiveing logs with this incorrect WARN.
And also according to local tests on all production BDW here ULT or HALO we don't
need this force anymore. So let's clean this block for real.
v2: Fix LPT_LP WARNs to avoid wrong warns on BDW_ULT (By Jani).
Reference: https://bugs.freedesktop.org/attachment.cgi?id=110972
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Xion Zhang <xiong.y.zhang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When creating a fence for a tiled object, only fence the area that
makes up the actual tiles. The object may be larger than the tiled
area and if we allow those extra addresses to be fenced, they'll
get converted to addresses beyond where the object is mapped. This
opens up the possiblity of writes beyond the end of object.
To prevent this, we adjust the size of the fence to only encompass
the area that makes up the actual tiles. The extra space is considered
un-tiled and now behaves as if it was a linear object.
Testcase: igt/gem_tiled_fence_overflow
Reported-by: Dan Hettena <danh@ghs.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit 6dda730e55
Author: Jani Nikula <jani.nikula@intel.com>
Date: Tue Jun 24 18:27:40 2014 +0300
drm/i915: respect the VBT minimum backlight brightness
introduced a bug which resulted in inconsistent brightness levels on
different machines. If a suspended was entered with the screen off some
machines would resume with the screen at minimum brightness and others
at maximum brightness.
The following commands can be used to produce this behavior.
xset dpms force off
sleep 1
sudo systemctl suspend
(resume ...)
The root cause of this problem is a comparison which checks to see if
the backlight level is zero when the panel is enabled. If it is zero,
it is set to the maximum level. Unfortunately, not all machines have a
minimum level of zero. On those machines the level is left at the
minimum instead of begin set to the maximum.
Fix the bug by updating the comparison to check for the minimum
backlight level instead of zero. Also, expand the comparison for
the possible case when the level is less than the minimum.
Fixes: 6dda730e55 ("respect the VBT minimum backlight brightness")
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 82460d972 ("drm/i915: Rework ppgtt init to no require an aliasing
ppgtt") introduced a regression on Broadwell, triggering the following
IOMMU fault at startup:
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 880000
DMAR:[fault reason 23] Unknown
fbcon: inteldrmfb (fb0) is primary device
Further commentary from Daniel:
I sugggested this change to David after staring at the offending patch
for a while. I have no idea and theory whatsoever why this would upset
the gpu less than the other way round. But it seems to work. David
promised to chase hw people a bit more to get a more meaningful answer.
Wrt the comment that this deletes: I've done some digging and afaict
loading context before ppgtt enable was once required before our recent
restructuring of the context/ppgtt init code: Before that context sw
setup (i.e. allocating the default context) and hw setup was smashed
together. Also the setup of the default context was the bit that
actually allocated the aliasing ppgtt structures. Which is the reason
for the context before ppgtt depency.
Or was, since with all the untangling there's no no real depency any
more (functional, who knows what the hw is doing), so the comment is
just stale.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm_plane_helper_{update,disable} are not specific to primary planes;
fix some copy/paste summaries to avoid confusion.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When commiting a plane update where the framebuffer doesn't change, we
can skip the prepare_fb/cleanup_fb steps. This also allows us to avoid
an unnecessary vblank wait at the end of the operation when we're just
moving a plane and not changing its image (e.g., for a cursor).
At the moment, i915 is the only upstream driver using the transitional
plane helpers, and thus the only driver affected by this change.
Note that this replicates a corresponding change in the atomic helpers
implemented in
commit ab58e3384b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Nov 24 20:42:42 2014 +0100
drm/atomic-helper: Skip vblank waits for unchanged fbs
Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88540
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
check error status for drm_iommu_attach_device() and make sure
it propagates till the caller.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>
Split update plane in two parts, an initial check part that can fail
and the update part that can't fail.
This is a important step for the upcoming atomic modesetting support.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We can safely use the mode stored in the crtc.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_manager was just a redundant struct to represent the crtc as
well. In this commit we merge exynos_drm_manager into exynos_drm_crtc to
remove an unnecessary level of indirection easing the understand of the
flow on exynos.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
manager-drm_dev is only accessed by exynos_drm_crtc_create() so this patch
pass drm_dev as argument on exynos_drm_crtc_create() and remove it from
struct exynos_drm_manager.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
'type' is now part of the struct exynos_drm_crtc. This is just another
step in the struct exynos_drm_manager removal.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It is not longer used. This is part of the process of removing
struct exynos_drm_manager entirely.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Get the pipe value from a parameter instead of getting it from
manager->pipe. We are removing manager->pipe.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
'base' is more widely used name in the drm subsystem for the base object.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This was just as extra chain in the call stack. We just rename it to
_set_base() and let it do everything alone.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Avoid an extra call to exynos_drm_crtc_mode_set_commit() that only calls
exynos_update_plane().
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We can safely use the exynos_update_plane() to update the plane
framebuffer for both the overlay and primary planes.
Note that this patch removes a call to manager->ops->commit() in
exynos_drm_crtc_mode_set_commit(). The commit() call is used only by the
fimd driver to set underlying timings and need only in full modeset
operations. For plane update only win_commit is needed.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It's doing nothing but calling exynos_crtc->ops->win_commit(), so let's
call this directly to avoid extra layers of abstraction.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DPMS only makes sense when the mode changes, for plane update changes do
not perform any dpms operation.
This move places the win_commit() and commit() calls directly in the code
instead of calling exynos_drm_crtc_commit() thus avoiding DPMS operations.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DPMS settings should only be changed by a full modeset.
exynos_plane_update() should only care about updating the planes itself
and nothing else.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
vidi_commit does nothing, remove it and its callers.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We set it in the beginning of the function, thus no need to set it at
initialization.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct exynos_drm_overlay has no practical advantage nor serves as
important piece of the exynos API design. The only place it was used
was inside the struct exynos_plane which was just causing a extra
access overhead. Users had to access the overlay first and just then
get the plane information it contains.
This patch merges struct exynos_drm_overlay into struct exynos_plane.
It also renames struct exynos_plane to struct exynos_drm_plane.
The rational is to cut one step to access plane information.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This functions were doing nothing but calling a manager op function,
so remove them and call the manager directly.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Let other pieces of the driver access struct exynos_drm_crtc as well.
struct exynos_drm_manager will be merged into struct exynos_drm_crtc, in
the sense we will move all its members to exynos_drm_crtc, so to start
this conversion exynos_drm_crtc need to be exposed as well.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
With this change we allow other pieces of the code to use this macro.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Instead of locking within host1x_device_add(), call it under the lock to
make the locking more consistent.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When a driver's ->probe() function fails, the host1x bus must not call
its ->remove() function because the driver will already have cleaned up
in the error handling path in ->probe().
Signed-off-by: Thierry Reding <treding@nvidia.com>
radeon_vm_map_gart can use rdev->gart.pages_entry instead.
Also move the masking of the page address to radeon_vm_map_gart from its
callers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GART table BO has to be moved out of VRAM for suspend/resume. Any
updates to the GART table during that time were silently dropped without
this change. This caused GPU lockups on resume in some cases, see the bug
reports referenced below.
This might also make GPU reset more robust in some cases, as we no longer
rely on the GART table in VRAM being preserved across the GPU
lockup/reset.
v2: Add logic to radeon_gart_table_vram_pin directly instead of
reinstating radeon_gart_restore
v3: Move code after assignment of rdev->gart.table_addr so that the GART
TLB flush can work as intended, add code comment explaining why we're
doing this
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85204
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86267
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_page_entry calculates the GART page table entry, which is just written
to the GART page table by set_page_entry.
This is a prerequisite for the following fix.
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/radeon/cik_sdma.c:293:6: sparse: symbol 'cik_sdma_ctx_switch_enable' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
In cases where MMU_NOTIFIER is not available, userptr will not be
available. Similar to i915, although not making an exception for
CAP_SYS_ADMIN.
The proposed userspace patches for userptr seem to handle the fall-
back properly, so a userptr-less kernel should not be a problem.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up some formatting in radeon_audio.c to be
more consistent with the rest of the driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the function radeon_bo_fbdev_mmap() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the function radeon_fbdev_total_size() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the function radeon_best_encoder() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added temperature values to SMC payload.
Fan mode check moved check to proper place.
Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds a possibility to control fan on SI parts
via exported hwmon variables. Note that automatic
ucode fan management pauses if you choose to enable
manual fan control. Use with caution!
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds a possibility to control fan on CI parts
via exported hwmon variables. Note that automatic
ucode fan management pauses if you choose to enable
manual fan control. Use with caution!
v2: agd5f: fix formatting, squash in:
minor fix for pwm1_enable exposed value
Track smc control in addition to fan mode
This fixes pwm1_enable being constantly set
to 1 because of enabled smc control
also handle the case where smc fan control is disabled.
Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds percent-based fan control. Attributes (I hope) follow the
sysfs-interface specification:
* pwm1 - fan speed query/manage
* pwm1_max, pwm1_min - min/max values for fan pwm (constant)
* pwm1_enable - fan control query/manage (enable/disable)
(There is no rpm-based control for now)
v2: agd5f: fix formatting
Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds 4 callbacks for managing fan state/speed
* fan_ctrl_set_mode - manages fan control mode (nonzero == manual)
* fan_ctrl_get_mode - queries fan control mode
* set_fan_speed_percent - manages fan speed as percentage value
* get_fan_speed_percent - queries fan speed as percentage value
Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the necessary set of commands to support OpenGL
indirect draw calls on evergreen/cayman devices that
do not have VM.
v2: agd5f: fix warning on 32-bit
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a bug where the first_pipe index passed into init_pipelines()
was a #define instead of the value that is passed into amdkfd by radeon
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch handles a case where amdkfd tries to destroy a queue but the queue
type is invalid.
This case occurs in non-HWS path.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch fixes a bug when calling to init_pipeline() interface.
The index that was passed to that function didn't take into account the
first_pipe value, which represents the first pipe index that is under amdkfd's
responsibility.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This patch fixes the behavior of kgd_init_pipeline in that this function
shouldn't automatically increase the pipe_id argument by 1 right at the start
of the function.
This is because the first_pipe value might not be always 1, and because a
proper interface function should not hide this info inside its implementation.
In other words, the calling function should provide the real pipe_id and not
count on kgd_init_pipeline to "fix" it.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
On some chipset we try to avoid possibly invasive output detection
methods (like load detect which can cause flickering elsewhere) in the
output poll work. Drivers could hence return unknown when a previous
full ->detect call returned a different state.
This change will generate a hotplug event, forcing userspace to do a
full scan. This in turn updates the connector->status field so that we
will _again_ get a state change when the hotplug work re-runs in 10
seconds.
To avoid this ping-pong loop detect this situation and clamp the
connector state to the old value.
Patch is inspired by a patch from Knut Peterson. Knut's patch
completely ignored connector state changes if either the old or new
status was unknown, which seemed to be a bit too agressive to me.
v2: Rebased onto the drm_probe_helper.c extraction.
References: http://lists.freedesktop.org/archives/dri-devel/2012-August/025975.html
Cc: Knut Petersen <Knut_Petersen@t-online.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's a race window (small for hpd, 10s large for polled outputs)
where userspace could sneak in with an unrelated connnector probe
ioctl call and eat the hotplug event (since neither the hpd nor the
poll code see a state change).
To avoid this, check whether the connector state changes in all other
->detect calls (in the current helper code that's only probe_single)
and if that's the case, fire off a hotplug event. Note that we can't
directly call the hotplug event handler, since that expects that no
locks are held (due to reentrancy with the fb code to update the kms
console).
Also, this requires that drivers using the probe_single helper
function set up the poll work. All current drivers do that already,
and with the reworked hpd handling there'll be no downside to
unconditionally setting up the poll work any more.
v2: Review from Rob Clark
- Don't bail out of the output poll work immediately if it's disabled
to make sure we deliver the delayed hoptplug events. Instead just
jump to the tail.
- Don't scheduel the work when it's not set up. Would be a driver bug
since using probe helpers for anything dynamic without them
initialized makes them all noops.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVKM is having it's namespace switched to nvkm_, which will conflict
with these functions (which are workarounds for the fact that as of
yet, we still aren't able to split DRM and NVKM completely).
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Shorter device name, make consistent with our engine enums.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Shorter device name, match Tegra and our existing enums.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Switch to NVIDIA's name for the device.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Rename to match the Linux subsystem responsible for the same kind of
things. Will be investigating how feasible it will be to expose the
GPU clock trees with it at some point.
The namespace of NVKM is being changed to nvkm_ instead of nouveau_,
which will be used for the DRM part of the driver. This is being
done in order to make it very clear as to what part of the driver a
given symbol belongs to, and as a minor step towards splitting the
DRM driver out to be able to stand on its own (for virt).
Because there's already a large amount of churn here anyway, this is
as good a time as any to also switch to NVIDIA's device and chipset
naming to ease collaboration with them.
A comparison of objdump disassemblies proves no code changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The symlinks were annoying some people, and they're not used anywhere
else in the kernel tree. The include directory structure has been
changed so that symlinks aren't needed anymore.
NVKM has been moved from core/ to nvkm/ to make it more obvious as to
what the directory is for, and as some minor prep for when NVKM gets
split out into its own module (virt) at a later date.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Having the two modules separated causes various unneeded complications,
including having to export symbols accessed between the modules. Make
things simpler by compiling platform device support into nouveau.ko.
Platform device support remains optional and is only compiled on Tegra.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Restore the nv50 cursor bo on resume, and load the lut in
nv50_display_display_init so it gets set on resume too.
Tested on a fermi and a curie.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Removes some functions that are not used anywhere:
nv04_display_late_takedown() nv04_display_early_init()
This was partially found by using a static code analysis program
called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Remove the function domain_to_ttm() that is not used anywhere.
This was partially found by using a static code analysis program
called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Remove the function nouveau_bo_rd16() that is not used anywhere.
This was partially found by using a static code analysis program
called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch adds one option for the boot config strings "NvClkMode*", so
that we can enable the "auto" mode when loading module.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch adds PWR support for GK20A. But instead of adding the PWR
features like firmware loading and communication with PMU firmware, we
add the DVFS (Dynamic Voltage and Frequency Scaling), which is one of
the PMU firmware's jobs on dGPUs, in this patch. This refers to the
idle signals provided by the NVIDIA hardware and tries to adjust the
performance level based on the calculated target. The reclocking policy
can be fine-tuned later when we have more real use cases.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The platform device does not use the common nouveau_pwr_init() to initialize
the PWR, but it does need the .pgob() be assigned to avoid NULL pointer
dereference in graph/nve4.c.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There might be some callers of nouveau_clock_astate(), and they are from
inetrrupt context. So we must ensure that this function can be atomic in
that condition. This patch adds one parameter which is subsequently passed
to nouveau_pstate_calc(). Therefore we can choose whether we want to wait
for the pstate work's completion or not.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Several braces were misplaced unintentionally. That caused the msi handling
became part of the default case of the first switch statement. So add the
missing ones.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Looks like a userspace bug can trigger this somehow during a mode
switch, causing: EVO complaint -> semaphores get out of sync ->
entire display stalled.
We likely want to be even stricter than this (or at least deal
better if EVO rejects our request), but I'll save that for the
drm_plane/atomic conversion and just fix the bug that I already
know can be triggered.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On NV50 and up, we'll allow fixed panels to use EDID-provided modes
without the GPU scaler, and force scaling (even for NONE) otherwise.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The hilarious part is that, under X, this won't work anyway because the
server decides to construct its own modes for some reason.
Tested with modetest, which isn't quite as insane. I'd hope that
wayland is more sensible.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Common programming sense dictates that resources allocated by a function
are freed by this function should it fails, but this is not the case for
the allocated structure of nouveau_sgdma_create_ttm(). It seems that
n00b contributors attempt to fix this one like bugs flying towards a bug
zapper, so add a comment to hopefully prevent this from happening
anymore.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nouveau_sgdma_be::dev is only set once during init and never used
anywhere, so remove it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The [ SUBDEV] specified in log output will be a bit different for
children of a subdev now. Previously this reports whatever subdev
is specified by object.engine, now it reports the subdev that owns
the object (so, up object.parent somewhere).
Later patches will append object and class identifiers to messages,
which will help clarify where it's coming from.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Makes the output slightly less useful, in that objects with the same
class handle can't be distinguished from each other now.
Upcoming commits will name objects with user-readable strings to fix
this problem.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
gpuobj has a condition of (bar && bar->alloc) around usage to avoid
some nasty ordering issues (which, i've now been reminded to add a
todo about fixing...) between bar and vm.
The bar->alloc part of the condition isn't currently necessary (it
used to be, another change made bar always NULL where it matters),
so we got lucky. That won't be the case for much longer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Makes things a bit more readable. This is specially important now as
upcoming commits are going to be gradually removing the use of macros
for down-casts, in favour of compile-time checking.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Has additional safeties for one. For two, needed for an upcoming
commit that removes abuse of nouveau_object.engine.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Backmerge Linus tree after rc5 + drm-fixes went in.
There were a few amdkfd conflicts I wanted to avoid,
and Ben requested this for nouveau also.
Conflicts:
drivers/gpu/drm/amd/amdkfd/Makefile
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
drivers/gpu/drm/amd/amdkfd/kfd_priv.h
drivers/gpu/drm/amd/include/kgd_kfd_interface.h
drivers/gpu/drm/i915/intel_runtime_pm.c
drivers/gpu/drm/radeon/radeon_kfd.c
fix a vmwgfx regression sleeping wrong task state.
* 'vmwgfx-fixes-3.19' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Replace the hw mutex with a hw spinlock
This patch enable the last big hardware feature of my driver: the
connector for panel.
Like for HMDI and HDA, Digital Video Out (DVO) create brige, encoder
and connector
drm objects.
* 'drm-sti-next-add-dvo' of git://git.linaro.org/people/benjamin.gaignard/kernel:
drm: sti: add DVO output connector
Add atmel HLCDC driver.
* tag 'atmel-hlcdc-drm-3.20' of https://github.com/bbrezillon/linux-at91:
drm: add DT bindings documentation for atmel-hlcdc-dc driver
drm: add Atmel HLCDC Display Controller support
drm: panel: simple-panel: add bus format information for foxlink panel
drm: panel: simple-panel: add support for bus_format retrieval
drm: add bus_formats and num_bus_formats fields to drm_display_info
The I2C address for the TDA9989 and TDA19989 is fixed at 0x34 but the
two LSBs of the TDA19988's address are set by two configuration pins
on the chip. Irrespective of the chip, the associated CEC peripheral's
I2C address is based upon the main I2C address.
This patch avoids any special handling required to support systems that
contain multiple TDA19988 devices on the same I2C bus.
Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copying 64 bit data from user space using get_user is not supported
on all architectures, and may result in the following build error.
ERROR: "__get_user_bad" [drivers/gpu/drm/drm.ko] undefined!
Avoid the problem by using copy_from_user.
Fixes: d34f20d6e2 ("drm: Atomic modeset ioctl")
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current implementation of drm_read() faces a number of issues:
1. Upon an error, it consumes the event which may lead to the client
blocking.
2. Upon an error, it forgets about events already copied
3. If it fails to copy a single event with O_NONBLOCK it falls into a
infinite loop of reporting EAGAIN.
3. There is a race between multiple waiters and blocking reads of the
events list.
Here, we inline drm_dequeue_event() into drm_read() so that we can take
the spinlock around the list walking and event copying, and importantly
reorder the error handling to avoid the issues above.
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Testcase: igt/drm_read
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.
v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 765d5b9c2b ("fbdev: fbcon: select VT_HW_CONSOLE_BINDING")
made FRAMEBUFFER_CONSOLE always select VT_HW_CONSOLE_BINDING, but forgot
to remove
select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
from the individual drivers' sections that already did this before.
Remove it, also from new drivers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e.
at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display
controller device.
This display controller supports at least one primary plane and might
provide several overlays and an hardware cursor depending on the IP
version.
At the moment, this driver only implements an RGB connector to interface
with LCD panels, but support for other kind of external devices might be
added later.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Anthony Harivel <anthony.harivel@emtrion.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Provide a way to specify panel requirement in terms of supported media bus
format (particularly useful for panels connected to an RGB or LVDS bus).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.
This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
RGB or LVDS busses).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r9/P
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
* tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits)
imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
imx-drm: encoder prepare/mode_set must use adjusted mode
imx-drm: ipuv3-crtc: Implement mode_fixup
drm_modes: add drm_display_mode_to_videomode
gpu: ipu-di: remove some non-functional code
gpu: ipu-di: Add ipu_di_adjust_videomode()
drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver
drm: bridge/dw_hdmi: request interrupt only after initializing the mutes
drm: bridge/dw_hdmi: add rockchip rk3288 support
dt-bindings: Add documentation for rockchip dw hdmi
drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
drm: bridge/dw_hdmi: add mode_valid support
drm: bridge/dw_hdmi: add support for multi-byte register width access
dt-bindings: add document for dw_hdmi
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
drm: imx: imx-hdmi: split phy configuration to platform driver
drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
...
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm: rcar-du: Implement support for interlaced modes
drm: rcar-du: Clamp DPMS states to on and off
drm: rcar-du: Enable hotplug detection on HDMI connector
drm: rcar-du: Output HSYNC instead of CSYNC
drm: rcar-du: Add support for external pixel clock
drm: rcar-du: Refactor DEFR8 feature
drm: rcar-du: Remove LVDS and HDMI encoders chaining restriction
drm: rcar-du: Configure pitch for chroma plane of multiplanar formats
drm: rcar-du: Don't fail probe in case of partial encoder init error
drm: adv7511: Remove interlaced mode check
- Add support for SDMA usermode queues
- Replace logic of sub-allocating from GART buffer in amdkfd. Instead
of using radeon_sa module, use a new module that is more suited for
this purpose
- Add the number of watch points to amdkfd topology
- Split a function that did two things into two seperate functions.
* tag 'drm-amdkfd-next-2015-01-09' of git://people.freedesktop.org/~gabbayo/linux:
drm/amd: Remove old radeon_sa funcs from kfd-->kgd interface
drm/radeon: Remove old radeon_sa usage from kfd-->kgd interface
drm/amdkfd: Using new gtt sa in amdkfd
drm/amdkfd: Allocate gart memory using new interface
drm/amdkfd: Fixed calculation of gart buffer size
drm/amdkfd: Add kfd gtt sub-allocator functions
drm/amdkfd: Add gtt sa related data to kfd_dev struct
drm/radeon: Impl. new gtt allocate/free functions
drm/amd: Add new kfd-->kgd interface for gart usage
drm/radeon: Enable sdma preemption
drm/amdkfd: Pass queue type to pqm_create_queue()
drm/amdkfd: Identify SDMA queue in create queue ioctl
drm/amdkfd: Add SDMA user-mode queues support to QCM
drm/amdkfd: Add SDMA mqd support
drm/radeon: Implement SDMA interface functions
drm/amd: Add SDMA functions to kfd-->kgd interface
drm/amdkfd: Process-device data creation and lookup split
drm/amdkfd: Add number of watch points to topology
- Remove the interrupt SW ring buffer impl. as it is not used by any module
in amdkfd.
- Fix a sparse warning
* tag 'drm-amdkfd-fixes-2015-01-13' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Fix sparse warning (different address space)
drm/amdkfd: Drop interrupt SW ring buffer
misc i915 fixes
* tag 'drm-intel-fixes-2015-01-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
drm/i915: Ban Haswell from using RCS flips
drm/i915: vlv: sanitize RPS interrupt mask during GPU idling
drm/i915: fix HW lockup due to missing RPS IRQ workaround on GEN6
drm/i915: gen9: fix RPS interrupt routing to CPU vs. GT
This pull request includes below fixups,
- Remove duplicated machine checking.
. It seems that this code was added when you merged 'v3.18-rc7' into
drm-next. commit id : e8115e79aa
- Fix hdmiphy reset.
. Exynos hdmi has two interfaces to control hdmyphy, one is I2C, other
is APB bus - memory mapped I/O. So this patch makes hdmiphy reset
to be done according to interfaces, I2C or APB bus.
- And add some exception codes.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix warning of vblank reference count
drm/exynos: remove unnecessary runtime pm operations
drm/exynos: fix reset codes for memory mapped hdmi phy
drm/exynos: remove the redundant machine checking code
CP microcode uses undocumented bits in this register to record queue
state information. The KFD zeroes these bits in update_mqd, when invoked
through the UPDATE_QUEUE ioctl, causing incoherent state when the ioctl
is used to successively unmap and map a queue.
Since the queue type cannot be changed in this path, move the MQD write
to init_mqd.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
dqm->queue_count tracks queues in the active state only. In a few
places this count is modified unconditionally, leading to an incorrect
value when the UPDATE_QUEUE ioctl is used to make a queue inactive.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Fixes a case where we call vmw_fifo_idle() from within a wait function with
task state !TASK_RUNNING, which is illegal.
In addition, make the locking fine-grained, so that it is performed once
for every read- and write operation. This is of course more costly, but we
don't perform much register access in the timing critical paths anyway. Instead
we have the extra benefit of being sure that we don't forget the hw lock around
register accesses. I think currently the kms code was quite buggy w r t this.
This fixes Red Hat Bugzilla Bug 1180796
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
This patch replaces the two current amdkfd module parameters with a new one.
The current parameters that are being replaced are:
- Maximum number of HSA processes
- Maximum number of queues per process
The new parameter that replaces them is called "Maximum queues per device"
This replacement achieves two goals:
- Allows the user to have as many HSA processes as it wants (until
a maximum of 512 HSA processes in Kaveri).
- Removes the limitation the user had on maximum number of queues per HSA
process. E.g. the user can now have processes which only have one queue and
other processes which have hundreds of queues, while before the user
couldn't have more than 128 queues per process (as default).
The default value of the new parameter is 4096 (32 * 128, which were the
defaults of the old parameters). There is almost no additional GART memory
required for the default case. As a reminder, this amount of queues requires a
little bit below 4MB of GART memory.
v2:
In addition, This patch defines a new counter for queues accounting in the DQM
structure. This is done because the current counter only counts active queues
which allows the user to create more queues than the
max_num_of_queues_per_device module parameter allows.
However, we need the current counter for the runlist packet build process, so
the solution is to have a dedicated counter for this accounting.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
In booting, we can see a below message.
[ 3.241728] exynos-mixer 14450000.mixer: Unbalanced pm_runtime_enable!
Already pm_runtime_enable is called by probe function. Remove
pm_runtime_enable/disable from mixer_bind and mixer_unbind.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This fixes reset codes to support memory mapped hdmi phy as well as hdmi
phy dedicated i2c lines.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Instead of pushing each byte via stack the specifier allows to supply the
pointer and length to dump buffers up to 64 bytes long.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is an important optimization for avoiding read-after-write (RAW)
stalls in the HiZ buffer. Certain workloads would run very slowly with
HiZ enabled, but run much faster with the "hiz=false" driconf option.
With this patch, they run at full speed even with HiZ.
Increases performance in OglVSInstancing by about 2.7x on Braswell.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is an important optimization for avoiding read-after-write (RAW)
stalls in the HiZ buffer. Certain workloads would run very slowly with
HiZ enabled, but run much faster with the "hiz=false" driconf option.
With this patch, they run at full speed even with HiZ.
Improves performance in OglVSInstancing by 3.2x on Broadwell GT3e
(Iris Pro 6200).
Thanks to Jesse Barnes and Ben Widawsky for their help in tracking this
down. Thanks to Chris Wilson for showing me the new workarounds system.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the first queue created was failed on DQM then PQM should
unregister the process from DQM.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch completely removes the sync_with_hw() because it was broken and
actually there is no point of using it.
This function was used to:
- Make sure that the submitted packet to the HIQ (which is a kernel queue) was
read by the CP. However, it was discovered that the method this function used
to do that (checking wptr == rptr) is not consistent with how the actual CP
firmware works in all cases.
- Make sure that the queue is empty before issuing the next packet. To achieve
that, the function blocked amdkfd from continuing until the recently
submitted packet was consumed. However, the acquire_packet_buffer() already
checks if there is enough room for a new packet so calling sync_with_hw() is
redundant.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
In order not to occupy the current core and thus prevent the core from
servicing IOMMU PPR requests, this patch replaces the call in DQM to
cpu_relax() with a call to schedule().
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
It is useful to know at debug time if we are keeping main link on.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No functional changes on this patch. Just grouping the link_standy decision
to avoid miss any change. Also making this info available everywhere
which will help to decide when to use vbt's tp time on following patch.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
[danvet: Slight editing of the commit message which was one huge
run-on sentence.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Let's respect vbt full_link (link_standby) on source side as well.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have only two possible states with so many names and combinations that
might be confusing.
1 - Main link active / enabled / stand by / on
2 - Main link disabled / off / full off
Let's start organizing it by fixing a inverted logic when setting the sink bit.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These conditions applies only to Haswell and we were also checking for them
on Valleyview/Cherryview.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ON these platforms we don't have hardware tracking working for any case.
So we need to fake this on software by forcing psr to exit on every
flush.
Manual tests indicated this was needed.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Description of the 'state' parameter for intel_plane_destroy_state() was
missing and the intel_atomic_plane.c file section heading did not match
drm.tmpl.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch fixes a minor bug in allocate_hqd(), where the loop run from the
next-to-allocate pipe until the number of pipes.
This is wrong because we need to consider the possibility where
next-to-allocate pipe is not 0, and thus, the for-loop only checks part of the
pipes and doesn't wrap-around, as it supposed to do.
Therefore, we add another counting variable to make sure we go over all the
pipes, regardless of where we start to look at the first iteration of the loop.
This bug only affected non-HWS mode. In HWS mode, the CP fw is responsible for
allocating the HQD.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
915 doens't support hotplug at all, so we shouldn't try to pretend
otherwise in the SDVO code.
Note: i915 does have hotplug support in hw, we simply never enabled it
in i915.ko: There's only one hpd bit for all outputs, so not worth the
bother to add this special case for this rather old platform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Clarify that only i915.ko doesn't support hpd on i915g.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we determine that a specific port is eDP, don't register the HDMI
connector/encoder for it. The reason being that we want to disable
HPD interrupts for eDP ports when the display is off, but the presence
of the extra HDMI connector would demand the HPD interrupt to remain
enabled all the time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The dev_priv->display.hpd_irq_setup hook is optional, so we can move the
I915_HAS_HOTPLUG() check out of i915_hpd_irq_setup() and only set up the
hook when hotplug support is present.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_hpd_irq_handler() walks the passed in hpd[] array assuming it
contains HPD_NUM_PINS elements. Currently that's not true as we don't
specify an explicit size for the arrays when initializing them. Avoid
the out of bounds accesses by specifying the size for the arrays.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 5a0afd4b78.
Although timeout mode allows higher residency it impact badly on performance.
I believe while we don't have a way to balance between performance and
power savings at runtime I believe we have to revert and prioritize
performance that was impacted a lot.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88103
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Wendy Wang <wendy.wang@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Found by reading the HIZ_CHICKEN documentation.
Improves performance in a HiZ microbenchmark by around 50%.
Improves performance in OglZBuffer by around 18%.
Thanks to Chris Wilson for helping me figure out where to put this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A previous commit enabled execlists by default:
commit 27401d126b ("drm/i915/bdw: Enable execlists by default where supported")
This allowed routine testing of execlists which exposed a regression when
resuming from suspend. The cause was tracked down the to recent changes to the
ring init sequence:
commit 35a57ffbb1 ("drm/i915: Only init engines once")
During a suspend/resume cycle the hardware Context Status Buffer write pointer
is reset. However since the recent changes to the init sequence the software CSB
read pointer is no longer reset. This means that context status events are not
handled correctly and new contexts are not written to the ELSP, resulting in an
apparent GPU hang.
Pending further changes to the ring init code, just move the
ring->next_context_status_buffer initialization into gen8_init_common_ring to
fix this regression.
v2: Moved init into gen8_init_common_ring rather than context_enable after
feedback from Daniel Vetter. Updated commit msg to reflect this and also cite
commits related to the regression. Fixed bz link to correct bug.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88096
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The userspace-requested plane coordinates are now always available via
plane->state.base (and the i915-adjusted values are stored in
plane->state), so we no longer use the coordinate fields in intel_plane
and can drop them.
Also, note that the error case for pageflip calls update_plane() to
program the values from plane->state; it's simpler to just call
intel_plane_restore() which does the same thing.
v2: Replace manual update_plane() with intel_plane_restore() in pageflip
error handler.
Reviewed-by(v1): Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Switch plane handling to use the atomic plane helpers. This means that
rather than provide our own implementations of .update_plane() and
.disable_plane(), we expose the lower-level check/prepare/commit/cleanup
entrypoints and let the DRM core implement update/disable for us using
those entrypoints.
The other main change that falls out of this patch is that our
drm_plane's will now always have a valid plane->state that contains the
relevant plane state (initial state is allocated at plane creation).
The base drm_plane_state pointed to holds the requested source/dest
coordinates, and the subclassed intel_plane_state holds the adjusted
values that our driver actually uses.
v2:
- Renamed file from intel_atomic.c to intel_atomic_plane.c (Daniel)
- Fix a copy/paste comment mistake (Bob)
v3:
- Use prepare/cleanup functions that we've already factored out
- Use newly refactored pre_commit/commit/post_commit to avoid sleeping
during vblank evasion
v4:
- Rebase to latest di-nightly requires adding an 'old_state' parameter
to atomic_update;
v5:
- Must have botched a rebase somewhere and lost some work. Restore
state 'dirty' flag to let begin/end code know which planes to
run the pre_commit/post_commit hooks for. This would have actually
shown up as broken in the next commit rather than this one.
v6:
- Squash kerneldoc patch into this one.
- Previous patches have now already taken care of most of the
infrastructure that used to be in this patch. All we're adding here
now is some thin wrappers.
v7:
- Check return of intel_plane_duplicate_state() for allocation
failures.
v8:
- Drop unused drm_plane_state -> intel_plane_state cast. (Ander)
- Squash in actual transition to plane helpers. Significant
refactoring earlier in the patchset has made the combined
prep+transition much easier to swallow than it was in earlier
iterations. (Ander)
v9:
- s/track_fbs/disabled_planes/ in the atomic crtc flags. The only fb's
we need to update frontbuffer tracking for are those on a plane about
to be disabled (since the atomic helpers never call prepare_fb() when
disabling a plane), so the new name more accurately describes what
we're actually tracking.
Testcase: igt/kms_plane
Testcase: igt/kms_universal_plane
Testcase: igt/kms_cursor_crc
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A few of the sprite-related function names in i915 are very similar
(e.g., intel_enable_planes() vs intel_crtc_enable_planes()) and don't
make it clear whether they only operate on sprite planes, or whether
they also apply to all universal plane types. Rename a few functions to
be more consistent with our function naming for primary/cursor planes or
to clarify that they apply specifically to sprite planes:
- s/intel_disable_planes/intel_disable_sprite_planes/
- s/intel_enable_planes/intel_enable_sprite_planes/
Also, drop the sprite-specific intel_destroy_plane() and just use
the type-agnostic intel_plane_destroy() function. The extra 'disable'
call that intel_destroy_plane() did is unnecessary since the plane will
already be disabled due to framebuffer destruction by the point it gets
called.
v2: Earlier consolidation patches have reduced the number of functions
we need to rename here.
v3: Also rename intel_plane_funcs vtable to intel_sprite_plane_funcs
for consistency with primary/cursor. (Ander)
v4: Convert comment for intel_plane_destroy() to kerneldoc now that it
is no longer a static function. (Ander)
Reviewed-by(v1): Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the vblank evasion up from the low-level, hw-specific
update_plane() handlers to the general plane commit operation.
Everything inside commit should now be non-sleeping, so this brings us
closer to how vblank evasion will behave once we move over to atomic.
v2:
- Restore lost intel_crtc->active check on vblank evasion
v3:
- Replace assert_pipe_enabled() in intel_disable_primary_hw_plane()
with an intel_crtc->active test; it turns out assert_pipe_enabled()
grabs some mutexes and can sleep, which we can't do with interrupts
disabled.
v4:
- Equivalent to v2; v3 change is now squashed into an earlier patch
of the series. (Ander).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Once we integrate our work into the atomic pipeline, plane commit
operations will need to happen with interrupts disabled, due to vblank
evasion. Our commit functions today include sleepable work, so those
operations need to be split out and run either before or after the
atomic register programming.
The solution here calculates which of those operations will need to be
performed during the 'check' phase and sets flags in an intel_crtc
sub-struct. New intel_begin_crtc_commit() and
intel_finish_crtc_commit() functions are added before and after the
actual register programming; these will eventually be called from the
atomic plane helper's .atomic_begin() and .atomic_end() entrypoints.
v2: Fix broken sprite code split
v3: Make the pre/post commit work crtc-based to match how we eventually
want this to be called from the atomic plane helpers.
v4: Some platforms that haven't had their watermark code reworked were
waiting for vblank, then calling update_sprite_watermarks in their
platform-specific disable code. These also need to be flagged out
of the critical section.
v5: Sprite plane test for primary show/hide should just set the flag to
wait for pending flips, not actually perform the wait. (Ander)
v6:
- Rebase onto latest di-nightly; picks up an important runtime PM fix.
- Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander)
- Use wait_for_flips flag for primary plane update rather than
performing the wait in the check routine.
- Added kerneldoc to pre_disable/post_enable functions that are no
longer static. (Ander)
- Replace assert_pipe_enabled() in intel_disable_primary_hw_plane()
with an intel_crtc->active test; it turns out assert_pipe_enabled()
grabs some mutexes and can sleep, which we can't do with interrupts
disabled.
v7:
- Check for fb != NULL when deciding whether the sprite plane hides the
primary plane during a sprite update. (PRTS)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If CONFIG_BUG=n __WARN_printf won't be defined leading to the below
build failure. The double underscores should have told us to steer clear
of it anyway.
drivers/gpu/drm/i915/intel_display.c: In function ‘assert_pll’:
drivers/gpu/drm/i915/intel_display.c:1027:2: error: implicit declaration
of function ‘__WARN_printf’ [-Werror=implicit-function-declaration]
I915_STATE_WARN(cur_state != state,
Use WARN(1, ...) instead. It handles CONFIG_BUG=n gracefully and, with
the constant condition, a sane compiler should reduce it to
__WARN_printf.
This is a regression introduced by
commit e2c719b75c
Author: Rob Clark <robdclark@gmail.com>
Date: Mon Dec 15 13:56:32 2014 -0500
drm/i915: tame the chattermouth (v2)
Reported-by: Jim Davis <jim.epost@gmail.com>
Reference: http://mid.gmane.org/CA+r1ZhgHTi7bS2irhtuSUs9aO=Br1dumN8=oAOeaMJDZ_ZhwBw@mail.gmail.com
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Conflicts:
drivers/gpu/drm/i915/intel_runtime_pm.c
Separate branch so that Takashi can also pull just this refactoring
into sound-next.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel merged two things in 72a3697097,
but he merged this code twice, Dan's static checker spotted it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If CONFIG_DEBUG_MUTEXES is set, the mutex->owner field is only cleared
if the mutex debugging is enabled which introduces a race in our
mutex_is_locked_by() - i.e. we may inspect the old owner value before it
is acquired by the new task.
This is the root cause of this error:
diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c
index 5cf6731..3ef3736 100644
--- a/kernel/locking/mutex-debug.c
+++ b/kernel/locking/mutex-debug.c
@@ -80,13 +80,13 @@ void debug_mutex_unlock(struct mutex *lock)
DEBUG_LOCKS_WARN_ON(lock->owner != current);
DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next);
- mutex_clear_owner(lock);
}
/*
* __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug
* mutexes so that we can do it here after we've verified state.
*/
+ mutex_clear_owner(lock);
atomic_set(&lock->count, 1);
}
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87955
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Like Ivybridge, we have reports that we get random hangs when flipping
with multiple pipes. Extend
commit 2a92d5bca1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Jul 8 10:40:29 2014 +0100
drm/i915: Disable RCS flips on Ivybridge
to also apply to Haswell.
Reported-and-tested-by: Scott Tsai <scottt.tw@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87759
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org # 2a92d5bca1 drm/i915: Disable RCS flips on Ivybridge
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We apply the RPS interrupt workaround on VLV everywhere except when
writing the mask directly during idling the GPU. For consistency do this
also there.
While at it also extend the code comment about affected platforms.
I couldn't reproduce the issue on VLV fixed by this workaround, by
removing the workaround from everywhere, while it's 100% reproducible on
SNB using igt/gem_reset_stats/ban-ctx-render. So also add a note that
it hasn't been verified if the workaround really applies to VLV/CHV.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In
commit dbea3cea69
Author: Imre Deak <imre.deak@intel.com>
Date: Mon Dec 15 18:59:28 2014 +0200
drm/i915: sanitize RPS resetting during GPU reset
we disable RPS interrupts during GPU resetting, but don't apply the
necessary GEN6 HW workaround. This leads to a HW lockup during a
subsequent "looping batchbuffer" workload. This is triggered by the
testcase that submits exactly this kind of workload after a simulated
GPU reset. I'm not sure how likely the bug would have triggered
otherwise, since we would have applied the workaround anyway shortly
after the GPU reset, when enabling GT powersaving from the deferred
work.
This may also fix unrelated issues, since during driver loading /
suspending we also disable RPS interrupts and so we also had a short
window during the rest of the loading / resuming where a similar
workload could run without the workaround applied.
v2:
- separate the fix to route RPS interrupts to the CPU on GEN9 too
to a separate patch (Daniel)
Bisected-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Testcase: igt/gem_reset_stats/ban-ctx-render
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87429
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
GEN8+ HW has the option to route PM interrupts to either the CPU or to
GT. For GEN8 this was already set correctly to routing to CPU, but not
for GEN9, so fix this. Note that when disabling RPS interrupts this was
set already correctly, though in that case it didn't matter much except
for the possibility of spurious interrupts.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
After switching to using the component interface this API isn't needed
any more.
v2-3: unchanged
v4:
- move the removal of i915_powerwell.h to this patch (Takashi)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Register a component to be used to interface with the snd_hda_intel
driver. This is meant to replace the same interface that is currently
based on module symbol lookup.
v2:
- change roles between the hda and i915 components (Daniel)
- add the implementation to a new file (Jani)
- use better namespacing (Jani)
v3:
- move the implementation to intel_audio.c (Daniel)
- rename display_component to audio_component (Daniel)
- add kerneldoc (Daniel)
v4:
- run forgotten git rm i915_component.c (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will be needed by later patches, so factor it out.
No functional change.
v2:
- s/dev_to_i915_priv/dev_to_i915/ (Jani)
- don't use the helper in i915_pm_suspend (Chris)
- simplify the helper (Chris)
v3:
- remove redundant upcasting in the helper (Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- plane handling refactoring from Matt Roper and Gustavo Padovan in prep for
atomic updates
- fixes and more patches for the seqno to request transformation from John
- docbook for fbc from Rodrigo
- prep work for dual-link dsi from Gaurav Signh
- crc fixes from Ville
- special ggtt views infrastructure from Tvrtko Ursulin
- shadow patch copying for the cmd parser from Brad Volkin
- execlist and full ppgtt by default on gen8, for testing for now
* tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (131 commits)
drm/i915: Update DRIVER_DATE to 20141219
drm/i915: Hold runtime PM during plane commit
drm/i915: Organize bind_vma funcs
drm/i915: Organize INSTDONE report for future.
drm/i915: Organize PDP regs report for future.
drm/i915: Organize PPGTT init
drm/i915: Organize Fence registers for future enablement.
drm/i915: tame the chattermouth (v2)
drm/i915: Warn about missing context state workarounds only once
drm/i915: Use true PPGTT in Gen8+ when execlists are enabled
drm/i915: Skip gunit save/restore for cherryview
drm/i915/chv: Use timeout mode for RC6 on chv
drm/i915: Add GPGPU_THREADS_DISPATCHED to the register whitelist
drm/i915: Tidy up execbuffer command parsing code
drm/i915: Mark shadow batch buffers as purgeable
drm/i915: Use batch length instead of object size in command parser
drm/i915: Use batch pools with the command parser
drm/i915: Implement a framework for batch buffer pools
drm/i915: fix use after free during eDP encoder destroying
drm/i915/skl: Skylake also supports DP MST
...
This patch change the calls throughout the amdkfd driver from the old kfd-->kgd
interface to the new kfd gtt sa inside amdkfd
v2: change the new call in sdma code that appeared because of the sdma feature
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch changes the calls to allocate the gart memory for amdkfd from the
old interface (radeon_sa) to the new one (kfd_gtt_sa)
The new gart sub-allocator is initialized with chunk size equal to 512 bytes.
This is because the KV MQD is 512 Bytes and most of the sub-allocations are
MQDs.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch makes the gart's buffer size calculation more accurate. This buffer
is needed per GPU.
It takes into account maximum number of MQDs, runlist packets, kernel queues
and reserves 512KB for other misc allocations.
The total size is just shy of 4MB, for 32 processes and 128 queues per
process, which are the defaults for amdkfd kernel module parameters.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds new kfd gtt sub-allocator functions that service the amdkfd
driver when it wants to use gtt memory.
The sub-allocator uses a bitmap to handle the memory area that was transferred
to it during init. It divides the memory area into chunks, according to chunk
size parameter.
The allocation function will allocate contiguous chunks from that memory area,
according to the requested size. If the requested size is smaller than the
chunk size, a single chunk will be allocated.
v2: Do some more verifications on parameters that are passed into
kfd_gtt_sa_init()
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds new fields to kfd_dev struct that are necessary for the new kfd
gtt sa module
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the implementation of the gtt interface functions.
The allocate function will allocate a single bo, pin and map it to kernel
memory. It will return the gpu address and cpu ptr as arguments.
v2:
The bulk of the allocations in the GART is for MQDs. MQDs represent active
user-mode queues, which are on the current runlist. It is important to
remember that active queues doesn't necessarily mean scheduled/running
queues, especially if there is over-subscription of queues or more than a
single HSA process.
Because the scheduling of the user-mode queues is done by the CP firmware,
amdkfd doesn't have any indication if the queue is scheduled or not. If the
CP will try to schedule a queue, and its MQD is not present, this will
probably stuck the CP permanently, as it will load garbage from the GART
(the address of the MQD is given to the CP inside the runlist packet).
In addition, there are a couple of small allocations which also should
always be pinned - runlist packets (2 packets) and HPDs. runlist packets can
be quite large, depending on number of processes and queues.
This new allocate function represents the short/mid-term solution of limiting
the total memory consumption to around 4MB by default.
The long-term solution is to create a mechanism through which radeon/ttm can
ask amdkfd to clear GART/VRAM memory due to memory pressure.
Then, amdkfd will preempt the running queues and wait until the memory pressure
is over. After that, amdkfd will reschedule the queues.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds two new functions to the kfd-->kgd interface:
init_gtt_mem_allocation, which allocate a large enough buffer on the amdkfd
needs, such as mqds, hpds, kernel queue, fence and runlists. This function
is only called once per GPU device. The size of the allocated buffer is
based on the maximum number of HSA processes and maximum number of queues
per HSA process (two amdkfd kernel module parameters).
free_gtt_mem, which frees a buffer that was allocated on the gart aperture.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alexey Skidanov <Alexey.skidanov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds to radeon the enablement of sdma preemption.
This is needed to support HWS of SDMA user-mode queues.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch passes the correct queue type to pqm_create_queue() instead of a
fixed KFD_QUEUE_TYPE_COMPUTE type.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a check to the create queue ioctl path, which identifies SDMA
queue type that is sent by userspace.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for SDMA user-mode queues to the QCM - the Queue
management system that manages queues-per-device and queues-per-process.
v2: Remove calls to interface function that initializes sdma engines.
v3: Use the new names of some of the defines.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for SDMA mqd operations:
- init_mqd_sdma
- uninit_mqd_sdma
- load_mqd_sdma
- update_mqd_sdma
- destroy_mqd_sdma
- is_occupied_sdma
It also adds SDMA queue information to some private structures of amdkfd.
v3: Use the new names of some of the defines.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch implements the new SDMA interface functions. It also adds defines
and structures related to SDMA registers.
v2: Removed init_sdma_engines() from interface. Initialization is done in
radeon.
v3:
- Removed unused defines.
- Added SDMA_ prefix to defines that didn't have them.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds three new functions to the kfd2kgd interface:
- hqd_sdma_load() - Loads SDMA mqd to a H/W SDMA hqd slot. Used only in no HWS
mode.
- hqd_sdma_is_occupied() - Checks if an SDMA hqd slot is occupied. Used only
in no HWS mode.
- hqd_sdma_destroy() - Destructs and preempts the SDMA queue assigned to
that SDMA hqd slot. Used only in no HWS mode.
These functions are needed to support SDMA queues scheduling when using no HWS
mode (used for debug or bring-up).
v2: Removed init_sdma_engines() from interface. Initialization is done in
radeon.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch splits the current kfd_get_process_device_data() to two
functions, one that specifically creates a pdd and another one which
just do lookup.
This is done to enhance the readability and maintainability of the code.
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This patch adds the number of watch points to the node capabilities in the
topology module
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
dma_alloc_attrs() returns NULL if it cannot allocate a dma buffer (or
mapping), not a negative error code.
Rerported-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Next batch of atomic work. Most important is the propertification from Rob
and the nth iteration of the actual atomic ioctl originally from Ville.
Big differences compared to earlier revisions:
- Core properties are now fully handled by the core, drivers can only
handle driver-specific properties.
- Atomic props&ioctl are opt-in per file_priv, userspace needs to
explicitly ask for it (like universal plane support).
- For now all hidden behind the atomic module option until this has
settled a bit.
- Atomic modesets are currently not possible since the exact abi for how
to handle the mode property is still under discussion.
Besides this some cleanup patches from me and the addition of per-object
state to global state backpointers to simplify drivers.
* tag 'topic/atomic-core-2015-01-05' of git://anongit.freedesktop.org/drm-intel:
drm: Ensure universal_planes is set for atomic
drm/atomic: Hide drm.ko internal interfaces
drm: Atomic modeset ioctl
drm/atomic: atomic connector properties
drm/atomic: atomic plane properties
drm: small property creation cleanup
drm/atomic: atomic_check functions
drm: add atomic properties
drm: refactor getproperties/getconnector
drm: tweak getconnector locking
drm: add atomic_get_property
drm: add atomic_set_property wrappers
drm: get rid of direct property value access
drm: store property instead of id in obj attachment
drm: allow property validation for refcnted props
drm/atomic: Introduce state->obj backpointers
drm/atomic-helper: Again check modeset *before* plane states
drm/atomic-helper: Export both plane and modeset check helpers
Misc drm patches with mostly polish patches from Thierry, with a bit of
generic mode validation from Ville and a few other oddball things.
* tag 'topic/core-stuff-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (25 commits)
drm: Include drm_crtc_helper.h in DocBook
drm: Make drm_crtc_helper.h standalone includible
drm: Move IRQ related fields to proper section
drm: Remove stale comment
drm: Do basic sanity checks for user modes
drm: Perform basic sanity checks on probed modes
drm: Reorganize probed mode validation
drm/doc: Remove duplicate "by"
drm/info: Remove unused code
drm/cache: Use wbinvd helpers
drm/plane-helper: Test for plane disable earlier
drm/doc: Document drm_add_modes_noedid() usage
drm: bit of spell-check / editorializing.
drm: Prefer sizeof(type) over sizeof type
drm: Remove useless else block
drm: Remove unneeded braces for single statement blocks
drm: Do not assign in if condition
drm: Prefer kmalloc_array() over kmalloc() with multiply
drm: Prefer kcalloc() over kzalloc() with multiply
drm: Miscellaneous checkpatch whitespace cleanups
...
We need to wait for the GPUVM flush to complete. There
was some confusion as to how this mechanism was supposed
to work. The operation is not atomic. For GPU initiated
invalidations you need to read back a VM register to
introduce enough latency for the update to complete.
v2: drop gart changes
v3: just read back rather than polling
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We need to wait for the GPUVM flush to complete. There
was some confusion as to how this mechanism was supposed
to work. The operation is not atomic. For GPU initiated
invalidations you need to read back a VM register to
introduce enough latency for the update to complete.
v2: drop gart changes
v3: just read back rather than polling
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We need to wait for the GPUVM flush to complete. There
was some confusion as to how this mechanism was supposed
to work. The operation is not atomic. For GPU initiated
invalidations you need to read back a VM register to
introduce enough latency for the update to complete.
v2: drop gart changes
v3: just read back rather than polling
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If not pinned VMA can become an eviction target just before it needs to be
executed which breaks the internal object lifetime rules.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87399
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The work queue couldn't reliably prevent the SW ring buffer from
overflowing, so dmesg was spammed by
kfd kfd: Interrupt ring overflow, dropping interrupt.
messages when running e.g. the Atlantis Substance demo from
https://wiki.unrealengine.com/Linux_Demos on Kaveri.
Since the SW ring buffer doesn't actually do anything at this point, just
remove it for now. When actual interrupt processing code is added to
amdkfd, it should try to do things immediately and only defer to work
queues when necessary.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
- Complete overhaul to the main IOCTL function, kfd_ioctl(), according to
drm_ioctl() example. This includes changing the IOCTL definitions, so it
breaks compatibility with previous versions of the userspace. However,
because the kernel was not officialy released yet, and this the first
kernel that includes amdkfd, I assume I can still do that at this stage.
- A couple of bug fixes for the non-HWS path (used for bring-ups and
debugging purposes only).
* tag 'amdkfd-fixes-2015-01-06' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl()
drm/amdkfd: reformat IOCTL definitions to drm-style
drm/amdkfd: Do copy_to/from_user in general kfd_ioctl()
drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS)
drm/radeon: Assign VMID to PASID for IH in non-HWS mode
drm/radeon: do not leave queue acquired if timeout happens in kgd_hqd_destroy()
drm/amdkfd: Load mqd to hqd in non-HWS mode
drm/amd: Fixing typos in kfd<->kgd interface
some minor radeon fixes.
* 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: integer underflow in radeon_cp_dispatch_texture()
drm/radeon: adjust default bapm settings for KV
drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw
drm/radeon: fix sad_count check for dce3
drm/radeon: KV has three PPLLs (v2)
- Fix BUG() on !SMP builds
- Fix for OOPS on pre-NV50 that snuck into -next
- MCP7[789A] hang fix where firmware hasn't already setup NISO pollers
- NV4x IGP MSI disable, it doesn't appear to work correctly
- Add GK208B to recognised boards (no code change aside from adding
chipset recognition)
* 'linux-3.19' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP
drm/nv4c/mc: disable msi
drm/nouveau/fb/ram/mcp77: enable NISO poller
drm/nouveau/fb/ram/mcp77: use carveout reg to determine size
drm/nouveau/fb/ram/mcp77: subclass nouveau_ram
drm/nouveau: wake up the card if necessary during gem callbacks
drm/nouveau/device: Add support for GK208B, resolves bug 86935
drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate
drm/nouveau/bios: fix oops on pre-nv50 chipsets
We do not need to track the state of the IPU DI's clock flags by having
each display bridge calling back into imx-drm-core, and then back out
into ipuv3-crtc.c.
ipuv3-crtc can instead just scan the list of encoders to retrieve their
type, and build up a picture of which types of encoders are attached.
We can then use this information to configure the IPU DI clocking mode
without any uncertainty - if we have multiple bridges connected to the
same DI, if one of them requires a synchronous DI clock, that's what we
must use.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We can use the DIV_ROUND_CLOSEST() macro when calculating the DI
clock divider, rounded to nearest int.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch changes struct ipu_di_signal_cfg to use struct videomode
to define video timings and flags.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The encoder ->prepare() and ->mode_set() methods need to use the
hw adjusted mode, not the original mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Ask the IPU display interface, via ipu_di_adjust_videomode(), to
adjust a video mode to meet any DI restrictions. The function takes
a subsystem independent videomode, so the drm_display_mode must be
converted to videomode first, and then the adjusted mode converted
back to a drm_display_mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add conversion from drm_display_mode to videomode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
h_total and v_total were calculated in ipu_di_init_sync_panel()
but never actually used. Remove.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On some monitors, high resolution modes are not working, exhibiting
pixel column truncation problems (for example, 1280x1024 displays as
1280x1022).
The function ipu_di_adjust_videomode() aims to fix these issues by
adjusting a passed videomode to IPU restrictions. The function can
be called from the drm_crtc_helper_funcs->mode_fixup() methods.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Deepak Das <deepak_das@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
To build the rockchip dw_hdmi driver as a module, the
rockchip_drm_encoder_get_mux_id and rockchip_drm_crtc_mode_config
functions need to be exported.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Otherwise a spurious interrupt might trigger (and crash) the interrupt handler
before probing finished.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Rockchip RK3288 hdmi is compatible with dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
RK3288 HDMI will not work without the spare bit of
HDMI_PHY_CONF0 enable
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
HDMI_IH_I2CMPHY_STAT0 is a clear on write register, which indicates i2cm
operation status(i2c transfer done or error), every hdmi phy register
configuration must check this register to make sure the configuration
has complete. But the indication bit should be cleared after check, otherwise
the corresponding bit will hold on forever, this may give a wrong signal for
next check.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
some platform may not support all the display mode,
add mode_valid interface check it
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On rockchip rk3288, only word(32-bit) accesses are
permitted for hdmi registers. Byte width accesses (writeb,
readb) generate an imprecise external abort.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
the original imx hdmi driver is under drm/imx/,
which depends on imx-drm, so move the imx hdmi
driver out to drm/bridge and rename it to dw_hdmi
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Sometimes we wish to tweak how an individual context behaves. Since we
always create a context for every filp, this means that individual
processes can fine tune their behaviour even if they do not explicitly
create a context.
The first example parameter here is to enable multi-process GPU testing,
but the interface should be able to cope with passing arbitrarily complex
parameters.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Testcase: igt/gem_reset_stats/ban-period-*
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It is platform/output depenedent when exactly the pipe will start
running. Sometimes we just need the (cpu) pipe enabled, in other cases
the pch transcoder is enough and in yet other cases the (DP) port is
sending the frame start signal.
In a perfect world we'd put the drm_crtc_vblank_on call exactly where
the pipe starts running, but due to cloning and similar things this
will get messy. And the current approach of picking the most
conservative place for all combinations also doesn't work since that
results in legit vblank waits (in encoder->enable hooks, e.g. the 2
vblank waits for sdvo) failing.
Completely going back to the old world before
commit 51e31d49c8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Sep 15 12:36:02 2014 +0200
drm/i915: Use generic vblank wait
isn't great either since screaming when the vblank wait work because
the pipe is off is kinda nice.
Pick a compromise and move the drm_crtc_vblank_on right before the
encoder->enable call. This is a lie on some outputs/platforms, but
after the ->enable callback the pipe is guaranteed to run everywhere.
So not that bad really. Suggested by Ville.
v2: Same treatment for drm_crtc_vblank_off and encoder->disable: I've
missed the ibx pipe B select w/a, which also has a vblank wait in the
disable function (while the pipe is obviously still running).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This will allow us to set per-file, or even per-context, periods in the
future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 371abae844.
This data seems unreliable and causing many issues and blocking other
teams and feature implementation. Safest way is to revert that for now.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88081
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88039
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87671
Cc: Vandana Kannan <vandana.kannan@intel.com>
Cc: Deepak M <m.deepak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch changes kfd_ioctl() to be very similar to drm_ioctl().
The patch defines an array of amdkfd_ioctls, which maps IOCTL definition to the
ioctl function.
The kfd_ioctl() uses that mapping to call the appropriate ioctl function,
through a function pointer.
This patch also declares a new typedef for the ioctl function pointer.
v2: Renamed KFD_COMMAND_(START|END) to AMDKFD_...
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
This patch reformats the ioctl definitions in kfd_ioctl.h to be similar to the
drm ioctls definition style.
v2: Renamed KFD_COMMAND_(START|END) to AMDKFD_...
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
This patch moves the copy_to_user() and copy_from_user() calls from the
different ioctl functions in amdkfd to the general kfd_ioctl() function, as
this is a common code for all ioctls.
This was done according to example taken from drm_ioctl.c
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
hdmi phy configuration is platform specific, which can be adjusted
according to the board to get the best SI
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
IMX6 and Rockchip RK3288 and JZ4780 (Ingenic Xburst/MIPS)
use the interface compatible Designware HDMI IP, but they
also have some lightly differences, such as phy pll configuration,
register width, 4K support, clk useage, and the crtc mux configuration
is also platform specific.
To reuse the imx hdmi driver, convert it to drm_bridge
handle encoder in imx-hdmi_pltfm.c, as most of the encoder
operation are platform specific such as crtc select and
panel format set
This patch depends on Russell King's patch:
drm: imx: convert imx-drm to use the generic DRM OF helper
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2014-July/053484.html
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
drm driver may probe before the i2c bus, so the driver should
defer probing until it is available
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
CHECK: Alignment should match open parenthesis
+ if ((hdmi->vic == 10) || (hdmi->vic == 11) ||
+ (hdmi->vic == 12) || (hdmi->vic == 13) ||
CHECK: braces {} should be used on all arms of this statement
+ if (hdmi->hdmi_data.video_mode.mdvi)
[...]
+ else {
[...]
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The functions ipu_dc_enable() and ipu_dc_disable() enable/disable the DC
globally in the IPU_CONF register, but the DC is used by multiple clients
on different DC channels. So make sure to only disable/enable the DC
globally based on a use counter.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use the generic DRM OF helper to locate the possible CRTCs for the
encoder, thereby shrinking the imx-drm driver some more.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
If edid was allocated during bind, it must be freed again during unbind.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
If edid was allocated during bind, it must be freed again during unbind.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch provides support to create write-combining virtual mappings of
GEM object. It intends to provide the same funtionality of 'mmap_gtt'
interface without the constraints and contention of a limited aperture
space, but requires clients handles the linear to tile conversion on their
own. This is for improving the CPU write operation performance, as with such
mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar
to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache
flush after update from CPU side, when object is passed onto GPU. This
type of mapping is specially useful in case of sub-region update,
i.e. when only a portion of the object is to be updated. Using a CPU mmap
in such cases would normally incur a clflush of the whole object, and
using a GTT mmapping would likely require eviction of an active object or
fence and thus stall. The write-combining CPU mmap avoids both.
To ensure the cache coherency, before using this mapping, the GTT domain
has been reused here. This provides the required cache flush if the object
is in CPU domain or synchronization against the concurrent rendering.
Although the access through an uncached mmap should automatically
invalidate the cache lines, this may not be true for non-temporal write
instructions and also not all pages of the object may be updated at any
given point of time through this mapping. Having a call to get_pages in
set_to_gtt_domain function, as added in the earlier patch 'drm/i915:
Broaden application of set-domain(GTT)', would guarantee the clflush and
so there will be no cachelines holding the data for the object before it
is accessed through this map.
The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been
extended with a new flags field (defaulting to 0 for existent users). In
order for userspace to detect the extended ioctl, a new parameter
I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface.
v2: Fix error handling, invalid flag detection, renaming (ickle)
v3: Rebase to latest drm-intel-nightly codebase
The new mmapping is exercised by igt/gem_mmap_wc,
igt/gem_concurrent_blit and igt/gem_gtt_speed.
Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Previously, this was restricted to only operate on bound objects - to
make pointer access through the GTT to the object coherent with writes
to and from the GPU. A second usecase is drm_intel_bo_wait_rendering()
which at present does not function unless the object also happens to
be bound into the GGTT (on current systems that is becoming increasingly
rare, especially for the typical requests from mesa). A third usecase is
a future patch wishing to extend the coverage of the GTT domain to
include objects not bound into the GGTT but still in its coherent cache
domain. For the latter pair of requests, we need to operate on the
object regardless of its bind state.
v2: After discussion with Akash, we came to the conclusion that the
get-pages was required in order for accurate domain tracking in the
corner cases (like the shrinker) and also useful for ensuring memory
coherency with earlier cached CPU mmaps in case userspace uses exotic
cache bypass (non-temporal) instructions.
v3: Fix the inactive object check.
v4: Rebase to latest drm-intel-nightly codebase
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Use WARN_ONs (Daniel)
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've written these long before we've had a reasonable docbook
structure, and naturally they've gone stale. Fix this up asap.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Haswell significantly improved the performance of sampler_c messages,
but the optimization appears to be off by default. Later platforms
remove this bit, and apparently always enable the optimization.
Improves performance in "Counter Strike: Global Offensive" by 18%
at default settings on Iris Pro.
This may break sampling of paletted formats (P8/A8P8/P8A8). It's
unclear whether it affects sampling of paletted formats in general,
or just the sample_c message (which is never used).
While libva does have support for using paletted formats (primarily
for OSDs), that support appears to have been broken for at least a
year, so I couldn't observe a regression from this:
I tried to get libva-intel to use paletted formats, and observe a
regression...but the only thing I found that used it was mplayer's OSD
(on screen display). Even without my patch, the colors were totally
wrong with that, and it's according to a few distro wikis, that's been
the case for over a year.
If libva's code for paletted formats /is/ broken, they could always
add code to disable this bit using the command validator when fixing
it.
Further investigation from Haihao shows that libva mplayer OSD seems
to work at least on his setup (still unclear what's wron with Ken's),
and that it's not affected by this patch. Quoting the discussion
between Haihao and Ken:
> > > If you use "-vo gl" or "-vo xv", the OSD is solid white text with a black
> > > border around it. I presume that it's supposed to be white with vaapi as
> > > well, but I guess I'm not entirely sure.
> > >
> > > It's possible that the optimization doesn't affect the palette as long as
> > > you never use sample_c with the paletted textures.
> >
> > I verified the palette takes effect in the following way:
> >
> > 1. Only support P8A8 format in the driver
> >
> > 2. ran the above command and I saw white OSD text
> >
> > 3. Only support P4A4 format in the driver and don't use
> > 3DSTATE_SAMPLER_PALETTE_LOAD0 to load the value to the texture palette,
> > so the palette keeps unchanged.
> >
> > 4. ran the above command and I saw black OSD text.
> >
> > 5. Load the right value to the texture palette and ran the above command
> > again, I saw white OSD text.
> >
> > Hence I think sample_c with the paletted textures is used in the driver.
>
> That sounds like the palette is actually working, then. Great :)
>
> I doubt that libva would use sample_c - sampling with a shadow comparison?
> It looks like it just uses sample and sample+killpix.
You are right, libva driver doesn't use sample_c message.
> I'm pretty sure the sample_c optimization just uses the palette memory as
> storage for some stuff, so it's quite possible it just works if you're
> only using sample and sample+killpix.
Thanks for the explanation, it makes sense to me.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
[danvet: Add wa name from Ville's review to the comment and copypaste
the explanation why we don't care about libva (already broken) from
Ken. Also add conclusion from libva devs that&why this is all fine.]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Xiang, Haihao" <haihao.xiang@intel.com>
Cc: libva@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The test:
if (size > RADEON_MAX_TEXTURE_SIZE) {
"size" is an integer and it's controled by the user so it can be
negative and the test can underflow. Later we use "size" in:
dwords = size / 4;
...
RADEON_COPY_MT(buffer, data, (int)(dwords * sizeof(u32)));
It causes memory corruption to copy a negative size buffer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling bapm seems to cause clocking problems on some
KV configurations. Disable it by default for now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The check was already in place in the dp mode_valid check, but
radeon_dp_get_dp_link_clock() never returned the high clock
mode_valid was checking for because that function clipped the
clock based on the hw capabilities. Add an explicit check
in the mode_valid function.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=87172
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc:stable@vge.kernel.org
Enable all three in the driver. Early documentation
indicated the 3rd one was used for something else, but
that is not the case.
v2: handle disable as well
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch fixes a bug where deallocate_vmid() didn't actually unmap the
VMID<-->PASID mapping (in the registers).
That can cause undefined behavior.
This bug only occurs in non-HWS mode.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Atomic doesn't really work without universal planes anyway. But make
sure that evil userspace doesn't pull the kernel over the table
because we didn't consider a cornercase that just doesn't make sense,
just for safety.
v2: Just force ->universal_planes to the same value to avoid imposing
restrictions on userspace.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This is just a bit fallout from patch polishing and moving the
get_prop logic fully into the core:
- Drop EXPORT_SYMBOL and make the helpers static.
- Drop kerneldoc since not used by drivers.
- Move the cross-file function declarations only used by drm.ko
internally to an internal header.
v2: keep the gist of the comments, requested by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The atomic modeset ioctl can be used to push any number of new values
for object properties. The driver can then check the full device
configuration as single unit, and try to apply the changes atomically.
The ioctl simply takes a list of object IDs and property IDs and their
values.
Originally based on a patch from Ville Syrjälä, although it has mutated
(mutilated?) enough since then that you probably shouldn't blame it on
him ;-)
The atomic support is hidden behind the DRM_CLIENT_CAP_ATOMIC cap (to
protect legacy userspace) and drm.atomic module param (for now).
v2: Check for file_priv->atomic to make sure we only allow userspace
in-the-know to use atomic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Expose the core connector state as properties so it can be updated via
atomic ioctl.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Expose the core plane state as properties, so they can be updated via
atomic ioctl.
v2: atomic property flag
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Getting ready to add a lot more standard properties for atomic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Realign function paramaters where the lines shrunk
massively.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add functions to check core plane/crtc state.
v2: comments, int-overflow checks, call from core rather than
helpers to be sure drivers can't find a way to bypass core
checks
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Once a driver is using atomic helpers for modeset, the next step is to
switch over to atomic properties. To do this, make sure that any
modeset objects have their ->atomic_{get,set}_property() vfuncs suitably
populated if they have custom properties (you did already remember to
plug in atomic-helper func for the legacy ->set_property() vfuncs,
right?), and then set DRIVER_ATOMIC bit in driver_features flag.
A new cap is introduced, DRM_CLIENT_CAP_ATOMIC, for the purposes of
shielding legacy userspace from atomic properties. Mostly for the
benefit of legacy DDX drivers that do silly things like getting/setting
each property at startup (since some of the new atomic properties will
be able to trigger modeset).
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Squash in fixup patch to check for DRM_MODE_PROP_ATOMIC
instaed of the CAP define when filtering properties. Reported by
Tvrtko Uruslin, acked by Rob.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Highlights:
- Link order changes in drm/Makefile and drivers/Makefile to fix issue
when amdkfd, radeon and amd_iommu_v2 are compiled inside the kernel
image.
- Consider kernel configuration (using #IFDEFs) when radeon initializes
amdkfd, due to a specific configuration that makes symbol_request()
return a non-NULL value when a symbol doesn't exists. Rusty Russel
is helping me to find the root cause, but it may take a while because
of year-end so I'm sending this as a band-aid solution.
* tag 'amdkfd-fixes-2014-12-30' of git://people.freedesktop.org/~gabbayo/linux:
drm/radeon: Init amdkfd only if it was compiled
amdkfd: actually allocate longs for the pasid bitmask
drm: Put amdkfd before radeon in drm Makefile
drivers: Move iommu/ before gpu/ in Makefile
amdkfd: Remove duplicate include
amdkfd: Fixing topology bug in building sysfs nodes
amdkfd: Fix accounting of device queues
I've had these since before -rc1, but they missed my last pull
request. Real bug fixes and mostly cc: stable material.
* tag 'drm-intel-next-fixes-2014-12-30' of git://anongit.freedesktop.org/drm-intel:
drm/i915: add missing rpm ref to i915_gem_pwrite_ioctl
Revert "drm/i915: Preserve VGACNTR bits from the BIOS"
drm/i915: Don't call intel_prepare_page_flip() multiple times on gen2-4
drm/i915: Kill check_power_well() calls
Digital Video Out connector driver LCD panels.
Like HDMI and HDA it create bridge, encoder and connector
drm object.
Add binding description.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
This patch changes the radeon_kfd_init(), which is used to initialize the
interface between radeon and amdkfd, so the interface will be initialized only
if amdkfd was build, either as module or inside the kernel image.
In the modules case, the symbol_request() will be used (same as old code). In
the in-image compilation case, a direct call to kgd2kfd_init() will be done.
For other cases, radeon_kfd_init() will just return false.
This patch is necessary because in case of the following specific
configuration: kernel 32-bit, no modules support, random kernel base and no
hibernation, the symbol_request() doesn't work as expected - it doesn't return
NULL if the symbol doesn't exists - which makes the kernel panic.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Commit "amdkfd: use sizeof(long) granularity for the pasid bitmask" calculated
the number of longs it will need, but ended up allocating that number of
bytes rather than longs.
Fix that silly error and allocate the amount of data really required.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
This reverts commit 355a701838.
This had some bad side effects under normal operation, and should
have been dropped earlier.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Display MEC fw version in topology. Without this, the HSA userspace
stack is broken.
- Init apertures information only once per process
* tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: init aperture once per process
amdkfd: Display MEC fw version in topology node
drm/radeon: Add implementation of get_fw_version
drm/amd: Add get_fw_version to kfd-->kgd interface
Accept interlaced modes on the VGA and HDMI connectors and configure the
hardware accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The intermediate DPMS standby and suspend states are a thing from the
past. They only matter in practice for VGA CRT monitors, and are just a
power saving vs. resume time optimization. Given that they have never
been implemented properly in the rcar-du driver and that the Intel
driver has dropped them on the vga port years ago, it's safe to only
care about the on and off states.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
As HDMI support hotplug detection, enable HPD-based poll on HDMI
connectors.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU outputs by default a composite sync signal (XOR of the horizontal
and vertical sync signals) on the HSYNC output pin. As this can confuse
devices and isn't needed by any of the supported encoders, configure the
HSYNC pin to output the horizontal sync signal.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU uses the module functional clock as the default pixel clock, but
supports using an externally supplied pixel clock instead. Support this
by adding the external pixel clock to the DT bindings, and selecting the
clock automatically at runtime based on the requested mode pixel
frequency.
The input clock pins to DU channels routing is configurable, but
currently hardcoded to connect input clock i to channel i.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Rename the feature from RCAR_DU_FEATURE_DEFR8 to
RCAR_DU_FEATURE_EXT_CTRL_REGS to cover all extended control registers in
addition to the DEFR8 register.
Usage of the feature is refactored to optimize runtime operation and
prepare for external clock support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar-du driver refuses connecting an LVDS output to an HDMI encoder.
There is not technical reason for that restriction, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The PnMWR register containing the plane stride must be programmed with
correct stride values for both the luma and chroma planes when using a
multiplanar format. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
If an encoder fails to initialize the device can still be used without
the failed encoder. Don't propagate the error out of the probe function
but just skip the failed encoder.
As a special case a deferred probe request from the encoder is still
propagated out of the probe function in order not to break the deferred
probing mechanism.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The ADV7511 supports interlaced modes fine, there's no need to reject
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
This is a set of fixes for two regressions and one bug in the IOMMU
mapping code. It turns out that all of these issues turn up primarily
on Tegra30 hardware. The IOMMU mapping bug only manifests on buffers
that aren't multiples of the page size. I happened to be testing HDMI
with 1080p while writing the code and framebuffers for that happen to
fit exactly within 2025 pages of 4 KiB each.
One of the regressions is caused by the IOMMU code allocating pages from
shmem which can have associated cache lines. If the pages aren't flushed
then these cache lines may be flushed later on and cause framebuffer
corruption. I'm not sure why I didn't see this before. Perhaps the board
that I was using had enough RAM so that the pages shmem would hand out
had a better chance of being unused. Or maybe I didn't look too closely.
The fix for this is to fake up an SG table so that it can be passed to
the DMA API. Ideally this would use drm_clflush_*(), but implementing
that for ARM causes DRM to fail to build as a module since some of the
low-level cache maintenance functions aren't exported. Hopefully we can
get a suitable API exported on ARM for the next release.
The second regression is caused by a mismatch between the hardware pipe
number and the CRTC's DRM index. These were used inconsistently, which
could cause one code location to call drm_vblank_get() with a different
pipe than the corresponding drm_vblank_put(), thereby causing the
reference count to become unbalanced. Alexandre also reported a possible
race condition related to this, which this series also fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=eVlK
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-3.19-rc1-fixes' of git://people.freedesktop.org/~tagr/linux into drm-fixes
drm/tegra: Fixes for v3.19-rc1
This is a set of fixes for two regressions and one bug in the IOMMU
mapping code. It turns out that all of these issues turn up primarily
on Tegra30 hardware. The IOMMU mapping bug only manifests on buffers
that aren't multiples of the page size. I happened to be testing HDMI
with 1080p while writing the code and framebuffers for that happen to
fit exactly within 2025 pages of 4 KiB each.
One of the regressions is caused by the IOMMU code allocating pages from
shmem which can have associated cache lines. If the pages aren't flushed
then these cache lines may be flushed later on and cause framebuffer
corruption. I'm not sure why I didn't see this before. Perhaps the board
that I was using had enough RAM so that the pages shmem would hand out
had a better chance of being unused. Or maybe I didn't look too closely.
The fix for this is to fake up an SG table so that it can be passed to
the DMA API. Ideally this would use drm_clflush_*(), but implementing
that for ARM causes DRM to fail to build as a module since some of the
low-level cache maintenance functions aren't exported. Hopefully we can
get a suitable API exported on ARM for the next release.
The second regression is caused by a mismatch between the hardware pipe
number and the CRTC's DRM index. These were used inconsistently, which
could cause one code location to call drm_vblank_get() with a different
pipe than the corresponding drm_vblank_put(), thereby causing the
reference count to become unbalanced. Alexandre also reported a possible
race condition related to this, which this series also fixes.
* tag 'drm/tegra/for-3.19-rc1-fixes' of git://people.freedesktop.org/~tagr/linux:
drm/tegra: dc: Select root window for event dispatch
drm/tegra: gem: Use the proper size for GEM objects
drm/tegra: gem: Flush buffer objects upon allocation
drm/tegra: dc: Fix a potential race on page-flip completion
drm/tegra: dc: Consistently use the same pipe
drm/irq: Add drm_crtc_vblank_count()
drm/irq: Add drm_crtc_handle_vblank()
drm/irq: Add drm_crtc_send_vblank_event()
misc i915 fixes.
* tag 'drm-intel-next-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Disable PSMI sleep messages on all rings around context switches
drm/i915: Force the CS stall for invalidate flushes
drm/i915: Invalidate media caches on gen7
drm/i915: sanitize RPS resetting during GPU reset
drm/i915: move RPS PM_IER enabling to gen6_enable_rps_interrupts
drm/i915: vlv: fix IRQ masking when uninstalling interrupts
Yeah a pull for one patch is a bit overkill but I started to assemble the
various patches for 3.20 in a branch for atomic props/ioctl and didn't
realize that this bugfix here at the beginnning of the branch should be in
3.19 (because msm is using the helpers arleady). So if you'd merge we'd
have it twice or or I need to shuffle branches again. Can do if you want.
* tag 'topic/atomic-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: fix potential null ptr on plane enable
A few msm fixes for 3.19:
* hdmi regulators fix
* hdmi fix for spurious HPD interrupts
* fix for sync atomic update after async update (which could show
up with a setcrtc following a pageflip)
* couple little Coccinelle cleanups
* 'msm-fixes-3.19' of git://people.freedesktop.org/~robclark/linux:
drm/msm/hdmi: rework HDMI IRQ handler
drm/msm/hdmi: enable regulators before clocks to avoid warnings
drm/msm/mdp5: update irqs on crtc<->encoder link change
drm/msm: block incoming update on pending updates
drm/msm: Deletion of unnecessary checks before the function call "release_firmware"
drm/msm: Deletion of unnecessary checks before two function calls
nouveau userspace back at 1.0.1 used to call the X server
DRIOpenDRMMaster interface even for DRI2 (doh!), this attempts
to map the sarea and fails if it can't.
Since 884c6dabb0 from Daniel,
this fails, but only ancient drivers would see it.
Revert the nouveau bits of that fix.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # 3.18
Signed-off-by: Dave Airlie <airlied@redhat.com>
On !SMP systems spinlocks do not exist. Thus checking of they
are active will always fail.
Use
assert_spin_locked(lock);
instead of
BUG_ON(!spin_is_locked(lock));
to not BUG() on all UP systems.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The failure paths if we fail to wake the card are less than desirable,
but there's not really a graceful way to handle this case currently.
I'll keep this situation in mind when I get to fixing other vm-related
issues.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nouveau_ttm_tt_unpopulate() is supposed to return right after calling
ttm_dma_unpopulate() in the case of a coherent buffer. The return
statement was omitted, leading to the pages being unmapped twice. Fix
this.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
