Rename the member len in the structure rpoc_vring to num. And remove 'in
bytes' from the comment of it. This is misleading. Because this actually
refers to the size of the virtio vring to be created. The unit is not
bytes.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20220624025621.128843-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i.MX93 features a Cortex-M33 core which could be kicked by ROM/Bootloader
/Linux. Similar with i.MX8MN/P, we use SMC to trap into Arm Trusted
Firmware to start/stop the M33 core.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220429005346.2108279-3-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The SCP firmware blob differs between platforms and SoCs. We add
support in the SCP driver for reading the path of firmware file from
DT in order to allow these files to live in a generic file system
(or linux-firmware).
The firmware-name property is optional and the code falls back to the
old filename if the property isn't present.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220419123331.14377-3-allen-kh.cheng@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Among the subsystems in the Qualcomm sc8280xp platform we find an audio
and two compute DSPs. Add support for controlling these using the
peripheral authentication service (PAS) remoteproc driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220408220539.625301-2-bjorn.andersson@linaro.org
Resource table is used by Linux to get information published by
remote processor. It should be not be used for memory allocation, so
not create rproc mem entry.
Fixes: b29b4249f8 ("remoteproc: imx_rproc: add i.MX specific parse fw hook")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220415025737.1561976-1-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There is no mutex protection of these state checking for 'stop'
and 'detach' which can't guarantee there is no another instance
is trying to do same operation.
Consider two instances case:
Instance1: echo stop > /sys/class/remoteproc/remoteproc0/state
Instance2: echo stop > /sys/class/remoteproc/remoteproc0/state
The issue is that the instance2 case may success, Or it
may fail with -EINVAL, which is uncertain.
So move this state checking in rproc_cdev_write() and
state_store() for 'stop', 'detach' operation to
'rproc_shutdown' , 'rproc_detach' function under the mutex
protection.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1648434012-16655-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There is no mutex protection of the state checking before rproc_boot(),
which can't guarantee there is no another instance is trying to do
same operation.
Consider two instances case:
Instance1: echo start > /sys/class/remoteproc/remoteproc0/state
Instance2: echo start > /sys/class/remoteproc/remoteproc0/state
...
Instance2: echo stop > /sys/class/remoteproc/remoteproc0/state
...
Instance1: echo stop > /sys/class/remoteproc/remoteproc0/state
The one issue is that the instance2 case may success when 'start'
happens at same time as instance1, then rproc->power = 2; Or it
may fail with -BUSY, then rproc->power = 1; which is uncertain.
The another issue is for 'stop' operation, if the rproc->power = 1,
when instance2 'stop' the remoteproc the instance1 will be
impacted for it still needs the service at that time.
The reference counter rproc->power is used to manage state
changing and there is mutex protection in each operation
function for multi instance case.
So remove this state checking in rproc_cdev_write() and
state_store() for 'start' operation, just let reference
counter rproc->power to manage the behaviors.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1648434012-16655-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There are cases when we want to test a simple "hello world"
app on the DSP and we do not need a resource table.
remoteproc core allows us having an optional rsc_table.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220331103237.340796-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
remoteproc elf loader supports the specific case that segments
have PT_LOAD and memsz/filesz set to zero, so no duplicate
code.
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220413033038.1715945-3-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Per elf specification,
p_filesz: This member gives the number of bytes in the file image of
the segment; it may be zero.
p_memsz: This member gives the number of bytes in the memory image
of the segment; it may be zero.
There is a case that i.MX DSP firmware has segment with PT_LOAD and
p_memsz/p_filesz set to zero. Such segment needs to be ignored,
otherwize rproc_da_to_va would report error.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220413033038.1715945-2-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need
to free it explicitly in the remove function.
Fixes: c1407ac109 ("remoteproc: mtk_scp: Use devm variant of rproc_alloc()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/1d15023b4afb94591435c48482fe1276411b9a07.1648981531.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
DebugFS APIs are designed to return only the error pointers and not NULL
in the case of failure. So these return pointers are safe to be passed on
to the successive debugfs_create* APIs.
Therefore, let's just get rid of the checks.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220329154616.58902-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The definition of L1TCM_SRAM_PDN bits on mt8195 is different to mt8192.
L1TCM_SRAM_PDN bits[3:0] control the power of mt8195 L1TCM SRAM.
L1TCM_SRAM_PDN bits[7:4] control the access path to EMI for SCP.
These bits have to be powered on to allow EMI access for SCP.
Bits[7:4] also affect audio DSP because audio DSP and SCP are
placed on the same hardware bus. If SCP cannot access EMI, audio DSP is
blocked too.
L1TCM_SRAM_PDN bits[31:8] are not used.
This fix removes modification of bits[7:4] when power on/off mt8195 SCP
L1TCM. It's because the modification introduces a short period of time
blocking audio DSP to access EMI. This was not a problem until we have
to load both SCP module and audio DSP module. audio DSP needs to access
EMI because it has source/data on DRAM. Audio DSP will have unexpected
behavior when it accesses EMI and the SCP driver blocks the EMI path at
the same time.
Fixes: 79111df414 ("remoteproc: mediatek: Support mt8195 scp")
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220321060340.10975-1-tinghan.shen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In the remoteproc core, it's now possible to mark the sysfs attributes
read only on a per-instance basis, which is then used by the TI wkup M3
driver. The rproc_shutdown() interface propagates errors to the caller
and an array underflow is fixed in the debugfs interface. The
rproc_da_to_va() API is moved to the public API to allow e.g. child
rpmsg devices to acquire pointers to memory shared with the remote
processor.
The TI K3 R5F and DSP drivers gains support for attaching to instances
already started by the bootloader, aka IPC-only mode.
The Mediatek remoteproc driver gains support for the MT8186 SCP. The
driver's probe function is reordered and moved to use the devres version
of rproc_alloc() to save a few gotos. The driver's probe function is
also transitioned to use dev_err_probe() to provide better debug
support.
Support for the Qualcomm SC7280 Wireless Subsystem (WPSS) is introduced.
The Hexagon based remoteproc drivers gains support for voting for
interconnect bandwidth during launch of the remote processor. The modem
subsystem (MSS) driver gains support for probing the BAM-DMUX
driver, which provides the network interface towards the modem on a set
of older Qualcomm platforms.
In addition a number a bug fixes are introduces in the Qualcomm drivers.
Lastly Qualcomm ADSP DeviceTree binding is converted to YAML format, to
allow validation of DeviceTree source files.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmJDx6EbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FkEgQAN0rLCX4WeFFdkvErBcl
7vvkVfr8Yz8hpTT72Dx9lAuX/IwZSpIU2PaIkfhsjNOxDPodCLYz1aep/xzVyNT1
sFaQ7RSF3ejbkOJcBcrF4FuGb7ryDY839TmTOAX098I7U+kCKZG0zncBmNBpGI9+
O0yBMDcpKR8/RnrUTIb90rVnzEXrQG53yTakPXjk5Vsimb29SbkRhcrYFgF9I3/T
AwwFZiRlxQ0Q9bHz/junVJP4caRpMk2VTPBaDGaQhhnXZQQTCP+BnbtZDLj+VdfD
fpG0Puen9yqxdW5WnPfLz77vz9wGnhTTzUZeOM2cRBFOXQiP6vzOxdBi4UjT4R37
bpR4FqmxnE9EQlKuBau6OtBpCQMRKze3530EGGef+5cT3OXzWXYYMsZaJ3dkVdii
WTTd18qRgprlCB3QJBx4lsETruHSKIonZ5kmEiK3sNJDrdQdNs1OcSMiJcs6p1DP
P5eY8NW4w8+RrjSySmWDVcjUBEZkDTFiqetqMe46VCwU/8I8QKcqLHKZNw06WiD2
CU7vpxK/VEKpXU1c4dxA92uH/aKHUdx3yuigpV9GIRT67YSsqDQmOpYHc9iHBna7
PwAhD5GJo08dIpkhz/+4DIuhot6yKvWNHITHap6YcEBktZNQ8zavxUWFZRDZmgx7
/do4s7YzlvQlI/Qu407bVJFn
=lj/5
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"In the remoteproc core, it's now possible to mark the sysfs attributes
read only on a per-instance basis, which is then used by the TI wkup
M3 driver.
Also, the rproc_shutdown() interface propagates errors to the caller
and an array underflow is fixed in the debugfs interface. The
rproc_da_to_va() API is moved to the public API to allow e.g. child
rpmsg devices to acquire pointers to memory shared with the remote
processor.
The TI K3 R5F and DSP drivers gains support for attaching to instances
already started by the bootloader, aka IPC-only mode.
The Mediatek remoteproc driver gains support for the MT8186 SCP. The
driver's probe function is reordered and moved to use the devres
version of rproc_alloc() to save a few gotos. The driver's probe
function is also transitioned to use dev_err_probe() to provide better
debug support.
Support for the Qualcomm SC7280 Wireless Subsystem (WPSS) is
introduced. The Hexagon based remoteproc drivers gains support for
voting for interconnect bandwidth during launch of the remote
processor. The modem subsystem (MSS) driver gains support for probing
the BAM-DMUX driver, which provides the network interface towards the
modem on a set of older Qualcomm platforms. In addition a number a bug
fixes are introduces in the Qualcomm drivers.
Lastly Qualcomm ADSP DeviceTree binding is converted to YAML format,
to allow validation of DeviceTree source files"
* tag 'rproc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
remoteproc: qcom_q6v5_mss: Create platform device for BAM-DMUX
remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
remoteproc: k3-dsp: Add support for IPC-only mode for all K3 DSPs
remoteproc: k3-dsp: Refactor mbox request code in start
remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs
remoteproc: k3-r5: Refactor mbox request code in start
remoteproc: Change rproc_shutdown() to return a status
remoteproc: qcom: q6v5: Add interconnect path proxy vote
remoteproc: mediatek: Support mt8186 scp
dt-bindings: remoteproc: mediatek: Add binding for mt8186 scp
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
remoteproc: move rproc_da_to_va declaration to remoteproc.h
remoteproc: wkup_m3: Set sysfs_read_only flag
remoteproc: Introduce sysfs_read_only flag
remoteproc: Fix count check in rproc_coredump_write()
remoteproc: mtk_scp: Use dev_err_probe() where possible
...
The modem remoteproc on older Qualcomm SoCs (e.g. MSM8916 and MSM8974)
implements the BAM-DMUX protocol to allow access to the network data
channels of the modem. The hardware/firmware resources required to
implement the BAM-DMUX driver are described in an extra node in the
device tree (with the compatible "qcom,bam-dmux").
This node logically belongs below the modem remoteproc, so that both
control interfaces (rpmsg_wwan_ctrl) and network interfaces (bam_dmux)
have a common parent.
Unlike other child devices of the modem remoteproc, the bam-dmux device
currently does not follow the state of the remoteproc (i.e. it is not
added/removed when the remoteproc is started/stopped). However, this is
an implementation detail of the bam_dmux driver in Linux that might
change in the future.
To be flexible for future changes, create a standard platform device
specifically only for "qcom,bam-dmux", rather than populating all child
nodes. This is also more consistent with the way the other child nodes
are handled in the driver.
Note: of_platform_device_create() and of_node_put() have NULL-checks
internally, so there is no need to check if the "qcom,bam-dmux" node
actually exists in the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220228225400.146555-2-stephan@gerhold.net
Add support for PIL loading of WPSS processor for SC7280
- WPSS boot will be requested by the wifi driver and hence
disable auto-boot for WPSS.
- Add a separate shutdown sequence handler for WPSS.
- Add multiple power-domain voting support
- Parse firmware-name from dtsi entry
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1643712724-12436-4-git-send-email-quic_mpubbise@quicinc.com
Add support to the K3 DSP remoteproc driver to configure all the C66x
and C71x cores on J721E SoCs to be either in IPC-only mode or the
traditional remoteproc mode. The IPC-only mode expects that the remote
processors are already booted by the bootloader, and only perform the
minimum steps required to initialize and deinitialize the virtio IPC
transports. The remoteproc mode allows the kernel remoteproc driver to
do the regular load and boot and other device management operations for
a DSP.
The IPC-only mode for a DSP is detected and configured at driver probe
time by querying the System Firmware for the DSP power and reset state
and/or status and making sure that the DSP is indeed started by the
bootloaders, otherwise the device is configured for remoteproc mode.
Support for IPC-only mode is achieved through .attach(), .detach() and
.get_loaded_rsc_table() callback ops and zeroing out the regular rproc
ops .prepare(), .unprepare(), .start() and .stop(). The resource table
follows a design-by-contract approach and is expected to be at the base
of the DDR firmware region reserved for each remoteproc, it is mostly
expected to contain only the virtio device and trace resource entries.
NOTE:
The driver cannot configure a DSP core for remoteproc mode by any
means without rebooting the kernel if that DSP core has been started
by a bootloader. This is the current desired behavior and can be
enhanced in the future if the feature is needed.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220213201246.25952-6-s-anna@ti.com
Refactor out the mailbox request and associated ping logic code
from k3_dsp_rproc_start() function into its own separate function
so that it can be re-used in the soon to be added .attach() ops
callback.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220213201246.25952-5-s-anna@ti.com
Add support to the K3 R5F remoteproc driver to configure all the R5F
cores to be either in IPC-only mode or the traditional remoteproc mode.
The IPC-only mode expects that the remote processors are already booted
by the bootloader, and only performs the minimum steps required to
initialize and deinitialize the virtio IPC transports. The remoteproc
mode allows the kernel remoteproc driver to do the regular load and
boot and other device management operations for a R5F core.
The IPC-only mode for a R5F core is detected and configured at driver
probe time by querying the System Firmware for the R5F power and reset
state and/or status and making sure that the R5F core is indeed started
by the bootloaders, otherwise the device is configured for remoteproc
mode.
Support for IPC-only mode is achieved through .attach(), .detach() and
.get_loaded_rsc_table() callback ops and zeroing out the regular rproc
ops .prepare(), .unprepare(), .start() and .stop(). The resource table
follows a design-by-contract approach and is expected to be at the base
of the DDR firmware region reserved for each remoteproc, it is mostly
expected to contain only the virtio device and trace resource entries.
NOTE:
The driver cannot configure a R5F core for remoteproc mode by any
means without rebooting the kernel if that R5F core has been started
by a bootloader. This is the current desired behavior and can be
enhanced in the future if the feature is needed.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220213201246.25952-4-s-anna@ti.com
Refactor out the mailbox request and associated ping logic code
from k3_r5_rproc_start() function into its own separate function
so that it can be re-used in the soon to be added .attach() ops
callback.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220213201246.25952-3-s-anna@ti.com
The rproc_shutdown() function is currently not returning any
error code, and any failures within rproc_stop() are not passed
back to the users. Change the signature to return a success value
back to the callers.
The remoteproc sysfs and cdev interfaces are also updated to
return back this status to userspace.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220213201246.25952-2-s-anna@ti.com
Many remoteproc instances requires that Linux casts a proxy vote for an
interconnect path during boot, until they can do it themselves. Add
support for voting for a single path.
As this is a shared problem between both PAS and MSS drivers, the path
is acquired and votes casted from the common helper code.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20220225033224.2238425-1-bjorn.andersson@linaro.org
Add SCP support for mt8186
Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220225132747.31808-3-allen-kh.cheng@mediatek.com
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.
This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.
Fixes: 278d744c46 ("remoteproc: qcom: Fix potential device node leaks")
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308064522.13804-1-linmq006@gmail.com
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: aed361adca ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308063102.10049-1-linmq006@gmail.com
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: dc160e4491 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308031219.4718-1-linmq006@gmail.com
The rproc_da_to_va() API is an exported function, so move its
declaration from the remoteproc local remoteproc_internal.h
to the public remoteproc.h file.
This will allow drivers outside of the remoteproc folder to be
able to use this API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[adjusted line numbers to apply]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308172515.29556-1-dfustini@baylibre.com
The Wakeup M3 remote processor is controlled by the wkup_m3_ipc
client driver, so set the newly introduced 'sysfs_read_only' flag
to not allow any overriding of the remoteproc firmware, state,
recovery, or coredump from userspace.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Link: https://lore.kernel.org/r/20220216081224.9956-3-p-mohan@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The remoteproc framework provides sysfs interfaces for changing
the firmware name and for starting/stopping a remote processor
through the sysfs files 'state' and 'firmware'. The 'coredump'
file is used to set the coredump configuration. The 'recovery'
sysfs file can also be used similarly to control the error recovery
state machine of a remoteproc. These interfaces are currently
allowed irrespective of how the remoteprocs were booted (like
remoteproc self auto-boot, remoteproc client-driven boot etc).
These interfaces can adversely affect a remoteproc and its clients
especially when a remoteproc is being controlled by a remoteproc
client driver(s). Also, not all remoteproc drivers may want to
support the sysfs interfaces by default.
Add support to make the remoteproc sysfs files read only by
introducing a state flag 'sysfs_read_only' that the individual
remoteproc drivers can set based on their usage needs. The default
behavior is to allow the sysfs operations as before.
Implement attribute_group->is_visible() to make the sysfs
entries read only when 'sysfs_read_only' flag is set.
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Link: https://lore.kernel.org/r/20220216081224.9956-2-p-mohan@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).
It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.
The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.
The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.
The RPM power-domain driver gains MSM8226 support.
Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.
-----BEGIN PGP SIGNATURE-----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=okza
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vkG6
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.18
This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).
It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.
The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.
The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.
The RPM power-domain driver gains MSM8226 support.
Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.
* tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (37 commits)
soc: qcom: rpmpd: Add MSM8226 support
dt-bindings: power: rpmpd: Add MSM8226 to rpmpd binding
soc: qcom: mdt_loader: Fix split-firmware condition
dt-bindings: arm: msm: Add LLCC compatible for SM8450
dt-bindings: arm: msm: Add LLCC compatible for SM8350
soc: qcom: llcc: Add configuration data for SM8450 SoC
soc: qcom: llcc: Update register offsets for newer LLCC HW
soc: qcom: llcc: Add missing llcc configuration data
soc: qcom: llcc: Add write-cache cacheable support
soc: qcom: llcc: Update the logic for version info extraction
soc: qcom: llcc: Add support for 16 ways of allocation
soc: qcom: socinfo: Add some more PMICs and SoCs
firmware: qcom: scm: Add support for MC boot address API
firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()
firmware: qcom: scm: Simplify set_cold/warm_boot_addr()
cpuidle: qcom-spm: Check if any CPU is managed by SPM
remoteproc: qcom: pas: Add SM8450 remoteproc support
dt-bindings: remoteproc: qcom: pas: Add SM8450 PAS compatibles
remoteproc: qcom: pas: Carry PAS metadata context
soc: qcom: mdt_loader: Extract PAS operations
...
Link: https://lore.kernel.org/r/20220301042055.1804859-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add audio, compute, sensor and modem remoteproc compatibles to the PAS
remoteproc driver. The resources needed for each one matches those of
SM8350, so its descs are reused.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-12-bjorn.andersson@linaro.org
Starting with Qualcomm SM8450 the metadata object shared with the secure
world during authentication and booting of a remoteproc needs to be
alive from init_image() until auth_and_reset().
Use the newly introduced "PAS metadata context" object to track this
context from load until the firmware has been booted.
In the even that load is performed but the process for some reason
doesn't reach auth_and_reset the unprepare callback is used to clean up
the allocated memory.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-10-bjorn.andersson@linaro.org
It's been observed that some firmware found in a Qualcomm SM8450 device
has the hash table in a separate .bNN file. Use the newly extracted
helper function to load this segment from the separate file, if it's
determined that the hashes are not part of the already loaded firmware.
In order to do this, the function needs access to the firmware basename
and to provide more useful error messages a struct device to associate
the errors with.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-4-bjorn.andersson@linaro.org
Simplify the probe function, where possible, by using dev_err_probe().
While at it, as to increase human readability, also remove some
unnecessary forced void pointer casts that were previously used in
error checking.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220124120915.41292-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cleanup the scp_probe() function by reordering some calls in this
function, useful to reduce the usage of goto(s), and preparing
for one more usage of dev_err_probe().
In particular, we can get the clocks before mapping the memory region,
and move the mutexes initialization right before registering the ipi
handler (which is the first mutex user in this driver).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220124120915.41292-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
To simplify the probe function, switch from using rproc_alloc() to
devm_rproc_alloc(); while at it, also put everything on a single line,
as it acceptably fits in 82 columns.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220124120915.41292-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When CONFIG_QCOM_AOSS_QMP=m and CONFIG_QCOM_Q6V5_MSS=y, the builtin
driver cannot call into the loadable module's low-level service
functions. Trying to build with that config combo causes linker errors.
There are two problems here. First, drivers/remoteproc/qcom_q6v5.c
should #include <linux/soc/qcom/qcom_aoss.h> for the definitions of
the service functions, depending on whether CONFIG_QCOM_AOSS_QMP is
set/enabled or not. Second, the qcom remoteproc drivers should depend
on QCOM_AOSS_QMP iff it is enabled (=y or =m) so that the qcom
remoteproc drivers can be built properly.
This prevents these build errors:
aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `q6v5_load_state_toggle':
qcom_q6v5.c:(.text+0xc4): undefined reference to `qmp_send'
aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `qcom_q6v5_deinit':
(.text+0x2e4): undefined reference to `qmp_put'
aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `qcom_q6v5_init':
(.text+0x778): undefined reference to `qmp_get'
aarch64-linux-ld: (.text+0x7d8): undefined reference to `qmp_put'
Fixes: c1fe10d238 ("remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-remoteproc@vger.kernel.org
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220115011338.2973-1-rdunlap@infradead.org
When a stop is requested on a crash, it is useless to try to shutdown it
gracefully, it is crashed.
In this case don't send the STM32_MBX_SHUTDOWN mailbox message that
will block the recovery during 500 ms, waiting an answer from the
coprocessor.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20211221143129.18415-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
pm_runtime_get_sync can also return 1 on success, change
to use pm_runtime_resume_and_get which return 0 only on
success.
This bug has been discovered by Dan Carpenter by using Smatch
static checker.
Fixes: 285892a74f ("remoteproc: Add Renesas rcar driver")
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[Fixed blank line between tags]
Link: https://lore.kernel.org/r/20211216160653.203768-1-julien.massot@iot.bzh
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add a config for the CDSP present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-7-luca.weiss@fairphone.com
Add a config for the ADSP present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-5-luca.weiss@fairphone.com
Add a config for the MPSS present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-3-luca.weiss@fairphone.com
ENABLE_M4 should be set to 1 when loading code to TCM, otherwise
you will not able to replace the firmware after you stop m4.
Besides ENABLE_M4, we still need set SW_M4C_RST, because this bit
will be automatically set with SW_M4C_NON_SCLR_RST set.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210602064206.27004-1-peng.fan@oss.nxp.com
Renesas Gen3 platform includes a Cortex-r7 processor.
Both: the application cores (A5x) and the realtime core (CR7)
share access to the RAM and devices with the same address map,
so device addresses are equal to the Linux physical addresses.
In order to initialize this remote processor we need to:
- power on the realtime core
- put the firmware in a RAM area
- set the boot address for this firmware (reset vector)
- Deassert the reset
This initial driver allows to start and stop the Cortex R7
processor.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Link: https://lore.kernel.org/r/20211207165829.195537-3-julien.massot@iot.bzh
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
