The use of kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Therefore, replace kmap() with kmap_local_page() in fuse_readdir_cached(),
it being the only call site of kmap() currently left in fs/fuse.
Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There's a race in fuse's readdir cache that can result in an uninitilized
page being read. The page lock is supposed to prevent this from happening
but in the following case it doesn't:
Two fuse_add_dirent_to_cache() start out and get the same parameters
(size=0,offset=0). One of them wins the race to create and lock the page,
after which it fills in data, sets rdc.size and unlocks the page.
In the meantime the page gets evicted from the cache before the other
instance gets to run. That one also creates the page, but finds the
size to be mismatched, bails out and leaves the uninitialized page in the
cache.
Fix by marking a filled page uptodate and ignoring non-uptodate pages.
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Fixes: 5d7bc7e868 ("fuse: allow using readdir cache")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_update_attributes() refreshes metadata for internal use.
Each use needs a particular set of attributes to be refreshed, but
currently that cannot be expressed and all but atime are refreshed.
Add a mask argument, which lets fuse_update_get_attr() to decide based on
the cache_mask and the inval_mask whether a GETATTR call is needed or not.
Reported-by: Yongji Xie <xieyongji@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Due to the introduction of kmap_local_*, the storage of slots used for
short-term mapping has changed from per-CPU to per-thread. kmap_atomic()
disable preemption, while kmap_local_*() only disable migration.
There is no need to disable preemption in several kamp_atomic places used
in fuse.
Link: https://lwn.net/Articles/836144/
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Server responds to LOOKUP and other ops (READDIRPLUS/CREATE/MKNOD/...)
with ourarg containing nodeid and generation.
If a fuse inode is found in inode cache with the same nodeid but different
generation, the existing fuse inode should be unhashed and marked "bad" and
a new inode with the new generation should be hashed instead.
This can happen, for example, with passhrough fuse filesystem that returns
the real filesystem ino/generation on lookup and where real inode numbers
can get recycled due to real files being unlinked not via the fuse
passthrough filesystem.
With current code, this situation will not be detected and an old fuse
dentry that used to point to an older generation real inode, can be used to
access a completely new inode, which should be accessed only via the new
dentry.
Note that because the FORGET message carries the nodeid w/o generation, the
server should wait to get FORGET counts for the nlookup counts of the old
and reused inodes combined, before it can free the resources associated to
that nodeid.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
inode_wrong_type(inode, mode) returns true if setting inode->i_mode
to given value would've changed the inode type. We have enough of
those checks open-coded to make a helper worthwhile.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jan Kara's analysis of the syzbot report (edited):
The reproducer opens a directory on FUSE filesystem, it then attaches
dnotify mark to the open directory. After that a fuse_do_getattr() call
finds that attributes returned by the server are inconsistent, and calls
make_bad_inode() which, among other things does:
inode->i_mode = S_IFREG;
This then confuses dnotify which doesn't tear down its structures
properly and eventually crashes.
Avoid calling make_bad_inode() on a live inode: switch to a private flag on
the fuse inode. Also add the test to ops which the bad_inode_ops would
have caught.
This bug goes back to the initial merge of fuse in 2.6.14...
Reported-by: syzbot+f427adf9324b92652ccc@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
We want to allow submounts for the same fuse_conn, but with different
superblocks so that each of the submounts has its own device ID. To do
so, we need to split all mount-specific information off of fuse_conn
into a new fuse_mount structure, so that multiple mounts can share a
single fuse_conn.
We need to take care only to perform connection-level actions once (i.e.
when the fuse_conn and thus the first fuse_mount are established, or
when the last fuse_mount and thus the fuse_conn are destroyed). For
example, fuse_sb_destroy() must invoke fuse_send_destroy() until the
last superblock is released.
To do so, we keep track of which fuse_mount is the root mount and
perform all fuse_conn-level actions only when this fuse_mount is
involved.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes coccicheck warning:
fs/fuse/readdir.c:335:1-19: WARNING: Assignment of 0/1 to bool variable
fs/fuse/file.c:1398:2-19: WARNING: Assignment of 0/1 to bool variable
fs/fuse/file.c:1400:2-20: WARNING: Assignment of 0/1 to bool variable
fs/fuse/cuse.c:454:1-20: WARNING: Assignment of 0/1 to bool variable
fs/fuse/cuse.c:455:1-19: WARNING: Assignment of 0/1 to bool variable
fs/fuse/inode.c:497:2-17: WARNING: Assignment of 0/1 to bool variable
fs/fuse/inode.c:504:2-23: WARNING: Assignment of 0/1 to bool variable
fs/fuse/inode.c:511:2-22: WARNING: Assignment of 0/1 to bool variable
fs/fuse/inode.c:518:2-23: WARNING: Assignment of 0/1 to bool variable
fs/fuse/inode.c:522:2-26: WARNING: Assignment of 0/1 to bool variable
fs/fuse/inode.c:526:2-18: WARNING: Assignment of 0/1 to bool variable
fs/fuse/inode.c:1000:1-20: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a filesystem returns negative inode sizes, future reads on the file were
causing the cpu to spin on truncate_pagecache.
Create a helper to validate the attributes. This now does two things:
- check the file mode
- check if the file size fits in i_size without overflowing
Reported-by: Arijit Banerjee <arijit@rubrik.com>
Fixes: d8a5ba4545 ("[PATCH] FUSE - core")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The old fuse_read_fill() helper can be deleted, now that the last user is
gone.
The fuse_io_args struct is moved to fuse_i.h so it can be shared between
readdir/read code.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This continues previous patch and introduces the same protection for
nlookup field.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the internal iversion counter to make sure modifications of the
directory through this filesystem are not missed by the mtime check (due to
mtime granularity).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Store the modification time of the directory in the cache, obtained before
starting to fill the cache.
When reading the cache, verify that the directory hasn't changed, by
checking if current modification time is the same as the one stored in the
cache.
This only needs to be done when the current file position is at the
beginning of the directory, as mandated by POSIX.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Allow the cache to be invalidated when page(s) have gone missing. In this
case increment the version of the cache and reset to an empty state.
Add a version number to the directory stream in struct fuse_file as well,
indicating the version of the cache it's supposed to be reading. If the
cache version doesn't match the stream's version, then reset the stream to
the beginning of the cache.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The cache is only used if it's completed, not while it's still being
filled; this constraint could be lifted later, if it turns out to be
useful.
Introduce state in struct fuse_file that indicates the position within the
cache. After a seek, reset the position to the beginning of the cache and
search the cache for the current position. If the current position is not
found in the cache, then fall back to uncached readdir.
It can also happen that page(s) disappear from the cache, in which case we
must also fall back to uncached readdir.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch just adds the cache filling functions, which are invoked if
FOPEN_CACHE_DIR flag is set in the OPENDIR reply.
Cache reading and cache invalidation are added by subsequent patches.
The directory cache uses the page cache. Directory entries are packed into
a page in the same format as in the READDIR reply. A page only contains
whole entries, the space at the end of the page is cleared. The page is
locked while being modified.
Multiple parallel readdirs on the same directory can fill the cache; the
only constraint is that continuity must be maintained (d_off of last entry
points to position of current entry).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
