On SSD20X family SoCs the timers are connected to a 432MHz clock instead
of 12MHz that all the previous chips used. There is no way to reduce or
divide these clocks in the clktree yet as we do not know exactly where
the 432MHz clock comes from but it is enabled at boot.
The SSD20X timers have an input clock divider within the timer itself
to configure the frequency. timer0 is preconfigured at power up to run
at 12MHz so it is backwards compatible and doesn't need special handling
right now. timer1 and timer2 run at 432Mhz at power up so are not
backward compatible.
This commit adds support for the input clock divider register and sets
timer1 and timer2 to run at 48Mhz for clockevents.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Link: https://lore.kernel.org/r/20211217195727.8955-3-romain.perier@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The MSC313e-compatible SoCs have 3 timer hardware blocks. All of these
are free running 32-bit increasing counters and can generate interrupts.
Based onto a maximum value register, each timer can either count from 0
to max, one time then stop (which generates interrupts) or can count
from 0 to max and then roll. This commit adds basic support for these
timers, the first timer block being used as clocksource/sched_clock
and delay, while the others will be used as clockevents.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Co-developed-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20211217195727.8955-2-romain.perier@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
