Factor out machine__idle_thread() so it can be re-used for guest machines.
A thread is needed to find executable code, even for the guest kernel. To
avoid possible future pid number conflicts, the idle thread can be used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out machines__find_guest() so it can be re-used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PIP packet NR (non-root) flag indicates whether or not a virtual
machine is being traced (NR=1 => VM). Add support for tracking its value.
In particular note that the PIP packet (outside of PSB+) will be
associated with a TIP packet from which address the NR value takes
effect. At that point, there is a branch from_ip, to_ip with
corresponding from_nr and to_nr.
In the event of VM-Entry failure, there should still PIP and TIP packets
that can be followed in the same way.
Also note that this assumes that a host VMM is not employing VMX controls
that affect Intel PT, e.g. to hide the host from a guest using Intel PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Retain the PIP packet payload as is, instead of just the CR3, because it
contains also the VMX NR flag which is needed to track VM-Entry.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to support Intel PT decoding of virtual machine traces, add
vmlaunch and vmresume as branch instructions.
Note, sample flags will show "VMentry" even if the VM-Entry fails.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to support Intel PT decoding of virtual machine traces, add
branch types for VM-Entry and VM-Exit.
Note they are both treated as "calls" because the VM-Exit transfers control
to a different address.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
aux-output events need to have an AUX area event as the group leader.
However, grouping events does not allow the AUX area event to be given
an address filter because the --filter option must come after the event,
which conflicts with the grouping syntax.
To allow filtering in that case, automatically create a group since that
is the requirement anyway.
Example: (requires Intel Tremont)
perf record -c 500 -e 'intel_pt//u' --filter 'filter main @ /bin/ls' -e 'cycles/aux-output/pp' ls
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210121140418.14705-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ubsan reported the following error. It was because sample's raw
data missed u32 padding at the end. So it broke the alignment of the
array after it.
The raw data contains an u32 size prefix so the data size should have
an u32 padding after 8-byte aligned data.
27: Sample parsing :util/synthetic-events.c:1539:4:
runtime error: store to misaligned address 0x62100006b9bc for type
'__u64' (aka 'unsigned long long'), which requires 8 byte alignment
0x62100006b9bc: note: pointer points here
00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
#0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13
#1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8
#2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9
#3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9
#4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9
#5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4
#6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9
#7 0x56153264e796 in run_builtin perf.c:312:11
#8 0x56153264cf03 in handle_internal_command perf.c:364:8
#9 0x56153264e47d in run_argv perf.c:408:2
#10 0x56153264c9a9 in main perf.c:538:3
#11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc)
#12 0x561532596828 in _start ...
SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use
util/synthetic-events.c:1539:4 in
Fixes: 045f8cd854 ("perf tests: Add a sample parsing test")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For X86, the var2_w field of PERF_SAMPLE_WEIGHT_STRUCT stands for the
instruction latency. Current perf forces the var2_w to the data->ins_lat
in the generic code. It works well for now because X86 is the only
architecture that supports the PERF_SAMPLE_WEIGHT_STRUCT, but it may
bring problems once other architectures support the sample type. For
example, the var2_w may be used to capture something else on PowerPC.
Create two architecture specific functions to parse and synthesize the
weight related samples. Move the X86 specific codes to the X86 version
functions. Other architectures can implement their own functions later
separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/1612540912-6562-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code assumed every CYC-eligible packet has a CYC packet, which is not
the case when CYC thresholds are used. Fix by checking if a CYC packet is
actually present in that case.
Fixes: 5b1dc0fd1d ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code assumed a change in cycle count means accurate IPC. That is not
correct, for example when sampling both branches and instructions, or at
a FUP packet (which is not CYC-eligible) address. Fix by using an explicit
flag to indicate when IPC can be sampled.
Fixes: 5b1dc0fd1d ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20210205175350.23817-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing CYC packet processing when walking through PSB+. This
improves the accuracy of timestamps that follow PSB+, until the next
MTC.
Fixes: 3d49807870 ("perf tools: Add new Intel PT packet definitions")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When locating the DWARF module for a given address, __find_debuginfo()
requires a 'struct dso' passed via the userdata argument.
However, this field is only set in __report_module() if the module is
found in via dwfl_addrmodule(), not if it is found later via
dwfl_report_elf().
Set userdata irrespective of how the DWARF module was found, as long as
we found a module.
Fixes: bf53fc6b5f ("perf unwind: Fix separate debug info files when using elfutils' libdw's unwinder")
Signed-off-by: Dave Rigby <d.rigby@me.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211801
Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/linux-perf-users/20210218165654.36604-1-d.rigby@me.com/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit da231338ec ("perf record: Use an eventfd to wakeup when
done") uses eventfd() to solve a rare race where the setting and
checking of 'done' which add done_fd to pollfd. When draining buffer,
revents of done_fd is 0 and evlist__filter_pollfd function returns a
non-zero value. As a result, perf record does not stop profiling.
The following simple scenarios can trigger this condition:
# sleep 10 &
# perf record -p $!
After the sleep process exits, perf record should stop profiling and exit.
However, perf record keeps running.
If pollfd revents contains only POLLERR or POLLHUP, perf record
indicates that buffer is draining and need to stop profiling. Use
fdarray_flag__nonfilterable() to set done eventfd to nonfilterable
objects, so that evlist__filter_pollfd() does not filter and check done
eventfd.
Fixes: da231338ec ("perf record: Use an eventfd to wakeup when done")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhangjinhao2@huawei.com
Link: http://lore.kernel.org/lkml/20210205065001.23252-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the following coccicheck warnings:
./tools/perf/util/header.c:3809:18-20: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/1612497255-87189-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not jump when 'k' is pressed, the cursor show stay where it is.
Right now, it jumps to the currently selected hot instruction.
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/65416cff-4eb6-713c-a174-2aa43fa64332@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eliminate the following coccicheck warning:
./tools/perf/util/metricgroup.c:382:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yang li <yang.lee@linux.alibaba.com>
Link: http://lore.kernel.org/lkml/1612165277-95878-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Detect symbols generated by the OCaml compiler based on their prefix.
Demangle OCaml symbols, returning a newly allocated string (like the
existing Java demangling functionality).
Move a helper function (hex) from tests/code-reading.c to util/string.c
To test:
echo 'Printf.printf "%d\n" (Random.int 42)' > test.ml
perf record ocamlopt.opt test.ml
perf report -d ocamlopt.opt
Signed-off-by: Fabian Hemmer <copy@copy.sh>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LPU-Reference: 20210203211537.b25ytjb6dq5jfbwx@nyu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With LTO, there are symbols like these:
/usr/lib/debug/usr/lib64/libantlr4-runtime.so.4.8-4.8-1.4.x86_64.debug
10305: 0000000000955fa4 0 NOTYPE LOCAL DEFAULT 29 Predicate.cpp.2bc410e7
This comes from a runtime/debug split done by the standard way:
objcopy --only-keep-debug $runtime $debug
objcopy --add-gnu-debuglink=$debugfn -R .comment -R .GCC.command.line --strip-all $runtime
perf currently cannot resolve such symbols (relicts of LTO), as section
29 exists only in the debug file (29 is .debug_info). And perf resolves
symbols only against runtime file. This results in all symbols from such
a library being unresolved:
0.38% main2 libantlr4-runtime.so.4.8 [.] 0x00000000000671e0
So try resolving against the debug file first. And only if it fails (the
section has NOBITS set), try runtime file. We can do this, as "objcopy
--only-keep-debug" per documentation preserves all sections, but clears
data of some of them (the runtime ones) and marks them as NOBITS.
The correct result is now:
0.38% main2 libantlr4-runtime.so.4.8 [.] antlr4::IntStream::~IntStream
Note that these LTO symbols are properly skipped anyway as they belong
neither to *text* nor to *data* (is_label && !elf_sec__filter(&shdr,
secstrs) is true).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210217122125.26416-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sample structure contains the field 'data_src' which is used to
tell the data operation attributions, e.g. operation type is loading or
storing, cache level, it's snooping or remote accessing, etc. At the
end, the 'data_src' will be parsed by perf mem/c2c tools to display
human readable strings.
This patch is to fill the 'data_src' field in the synthesized samples
base on different types. Currently perf tool can display statistics for
L1/L2/L3 caches but it doesn't support the 'last level cache'. To fit
to current implementation, 'data_src' field uses L3 cache for last level
cache.
Before this commit, perf mem report looks like this:
# Samples: 75K of event 'l1d-miss'
# Total weight : 75951
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access
# ........ ....... ............ ............. ...................... ............. ...................... ........... ..... ..........
#
81.56% 61945 0 N/A [.] 0x00000000000009d8 serial_c [.] 0000000000000000 [unknown] N/A N/A
18.44% 14003 0 N/A [.] 0x0000000000000828 serial_c [.] 0000000000000000 [unknown] N/A N/A
Now on a system with Arm SPE, addresses and access types are displayed:
# Samples: 75K of event 'l1d-miss'
# Total weight : 75951
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access
# ........ ....... ............ ............. ...................... ............. ...................... ........... ..... ..........
#
0.43% 324 0 L1 miss [.] 0x00000000000009d8 serial_c [.] 0x0000ffff80794e00 anon N/A Walker hit
0.42% 322 0 L1 miss [.] 0x00000000000009d8 serial_c [.] 0x0000ffff80794580 anon N/A Walker hit
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-6-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The memory event can deliver two benefits:
- The first benefit is the memory event can give out global view for
memory accessing, rather than organizing events with scatter mode
(e.g. uses separate event for L1 cache, last level cache, etc) which
which can only display a event for single memory type, memory events
include all memory accessing so it can display the data accessing
cross memory levels in the same view;
- The second benefit is the sample generation might introduce a big
overhead and need to wait for long time for Perf reporting, we can
specify itrace option '--itrace=M' to filter out other events and only
output memory events, this can significantly reduce the overhead
caused by generating samples.
This patch is to enable memory event for Arm SPE.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To properly handle memory and branch samples, this patch divides into
two functions for generating samples: arm_spe__synth_mem_sample() is for
synthesizing memory and TLB samples; arm_spe__synth_branch_sample() is
to synthesize branch samples.
Arm SPE backend decoder has passed virtual and physical address through
packets, the address info is stored into the synthesize samples in the
function arm_spe__synth_mem_sample().
Committer notes:
Fixed this:
36 46.77 fedora:27 : FAIL clang version 5.0.2 (tags/RELEASE_502/final)
util/arm-spe.c:269:34: error: missing field 'pid' initializer [-Werror,-Wmissing-field-initializers]
struct perf_sample sample = { 0 };
^
util/arm-spe.c:288:34: error: missing field 'pid' initializer [-Werror,-Wmissing-field-initializers]
struct perf_sample sample = { 0 };
By using = { .ip = 0, };
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf failed to add a kretprobe event with debuginfo of vmlinux which is
compiled by gcc with -fpatchable-function-entry option enabled. The
same issue with kernel module.
Issue:
# perf probe -v 'kernel_clone%return $retval'
......
Writing event: r:probe/kernel_clone__return _text+599624 $retval
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
# cat /sys/kernel/debug/tracing/error_log
[156.75] trace_kprobe: error: Retprobe address must be an function entry
Command: r:probe/kernel_clone__return _text+599624 $retval
^
# llvm-dwarfdump vmlinux |grep -A 10 -w 0x00df2c2b
0x00df2c2b: DW_TAG_subprogram
DW_AT_external (true)
DW_AT_name ("kernel_clone")
DW_AT_decl_file ("/home/code/linux-next/kernel/fork.c")
DW_AT_decl_line (2423)
DW_AT_decl_column (0x07)
DW_AT_prototyped (true)
DW_AT_type (0x00dcd492 "pid_t")
DW_AT_low_pc (0xffff800010092648)
DW_AT_high_pc (0xffff800010092b9c)
DW_AT_frame_base (DW_OP_call_frame_cfa)
# cat /proc/kallsyms |grep kernel_clone
ffff800010092640 T kernel_clone
# readelf -s vmlinux |grep -i kernel_clone
183173: ffff800010092640 1372 FUNC GLOBAL DEFAULT 2 kernel_clone
# objdump -d vmlinux |grep -A 10 -w \<kernel_clone\>:
ffff800010092640 <kernel_clone>:
ffff800010092640: d503201f nop
ffff800010092644: d503201f nop
ffff800010092648: d503233f paciasp
ffff80001009264c: a9b87bfd stp x29, x30, [sp, #-128]!
ffff800010092650: 910003fd mov x29, sp
ffff800010092654: a90153f3 stp x19, x20, [sp, #16]
The entry address of kernel_clone converted by debuginfo is _text+599624
(0x92648), which is consistent with the value of DW_AT_low_pc attribute.
But the symbolic address of kernel_clone from /proc/kallsyms is
ffff800010092640.
This issue is found on arm64, -fpatchable-function-entry=2 is enabled when
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y;
Just as objdump displayed the assembler contents of kernel_clone,
GCC generate 2 NOPs at the beginning of each function.
kprobe_on_func_entry detects that (_text+599624) is not the entry address
of the function, which leads to the failure of adding kretprobe event.
kprobe_on_func_entry
->_kprobe_addr
->kallsyms_lookup_size_offset
->arch_kprobe_on_func_entry // FALSE
The cause of the issue is that the first instruction in the compile unit
indicated by DW_AT_low_pc does not include NOPs.
This issue exists in all gcc versions that support
-fpatchable-function-entry option.
I have reported it to the GCC community:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98776
Currently arm64 and PA-RISC may enable fpatchable-function-entry option.
The kernel compiled with clang does not have this issue.
FIX:
This GCC issue only cause the registration failure of the kretprobe event
which doesn't need debuginfo. So, stop using debuginfo for retprobe.
map will be used to query the probe function address.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210210062646.2377995-1-Jianlin.Lv@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The first time dso__load() was called on a PE file it always returned -1
error. This caused the first call to map__find_symbol() to always fail
on a PE file so the first sample from each PE file always had symbol
<unknown>. Subsequent samples succeed however because the DSO is already
loaded.
This fixes dso__load() to return 0 when successfully loading a DSO with
libbfd.
Fixes: eac9a4342e ("perf symbols: Try reading the symbol table with libbfd")
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/1671b43b-09c3-1911-dbf8-7f030242fbf7@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__load_bfd_symbols() attempts to load a DSO at its original path,
then closes it and loads the file in the debug cache. This is incorrect.
It should ignore the original file and work with only the debug cache.
The original file may have changed or may not even exist, for example if
the debug cache has been transferred to another machine via "perf
archive".
This fix makes it only load the file in the debug cache.
Further notes from Nicholas:
dso__load_bfd_symbols() is called in a loop from dso__load() for a variety
of paths. These are generated by the various DSO_BINARY_TYPEs in the
binary_type_symtab list at the top of util/symbol.c. In each case the
debugfile passed to dso__load_bfd_symbols() is the path to try.
One of those iterations (the first one I believe) passes the original path
as the debugfile. If the file still exists at the original path, this is
the one that ends up being used in case the debugcache was deleted or the
PE file doesn't have a build-id.
A later iteration (BUILD_ID_CACHE) passes debugfile as the file in the
debugcache if it has a build-id. Even if the file was previously loaded at
its original path, (if I understand correctly) this load will override it
so the debugcache file ends up being used.
Committer notes:
So if it fails to find in the cache, it will eventually hope for the
best and look at the path in the local filesystem, which in many cases
is enough.
At some point we need to switch from this "hope for the best" approach
to one that warns the user that there is no guarantee, if no buildid is
present, that just by looking at the pathname the symbolisation will
work.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/e58e1237-94ab-e1c9-a7b9-473531906954@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to store operation type in packet structure.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to store virtual and physical memory addresses in packet,
which will be used for memory samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210211133856.2137-2-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to enable sample type PERF_SAMPLE_DATA_SRC for Arm SPE in
the perf data, when output the tracing data, it tells tools that it
contains data source in the memory event.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210211133856.2137-1-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Minor cleanup.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210211183914.4093187-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Migrated to libperf in:
4b247fa731 ("libperf: Adopt xyarray class from perf")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210212043803.365993-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC (GCC) 8.4.0 20200304 fails to build perf with:
: util/symbol.c: In function 'dso__load_bfd_symbols':
: util/symbol.c:1626:16: error: comparison of integer expressions of different signednes
: for (i = 0; i < symbols_count; ++i) {
: ^
: util/symbol.c:1632:16: error: comparison of integer expressions of different signednes
: while (i + 1 < symbols_count &&
: ^
: util/symbol.c:1637:13: error: comparison of integer expressions of different signednes
: if (i + 1 < symbols_count &&
: ^
: cc1: all warnings being treated as errors
It's unlikely that the symtable will be that big, but the fix is an
oneliner and as perf has CORE_CFLAGS += -Wextra, which makes build to
fail together with CORE_CFLAGS += -Werror
Fixes: eac9a4342e ("perf symbols: Try reading the symbol table with libbfd")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Jacek Caban <jacek@codeweavers.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Link: http://lore.kernel.org/lkml/20210209145148.178702-1-dima@arista.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Considering the following testcase:
int
foo(int a, int b)
{
for (unsigned i = 0; i < 1000000000; i++)
a += b;
return a;
}
int main()
{
foo (3, 4);
return 0;
}
'perf annotate' displays:
86.52 │40055e: → ja 40056c <foo(int, int)+0x26>
13.37 │400560: mov -0x18(%rbp),%eax
│400563: add %eax,-0x14(%rbp)
│400566: addl $0x1,-0x4(%rbp)
0.11 │40056a: → jmp 400557 <foo(int, int)+0x11>
│40056c: mov -0x14(%rbp),%eax
│40056f: pop %rbp
and the 'ja 40056c' does not link to the location in the function. It's
caused by fact that comma is wrongly parsed, it's part of function
signature.
With my patch I see:
86.52 │ ┌──ja 26
13.37 │ │ mov -0x18(%rbp),%eax
│ │ add %eax,-0x14(%rbp)
│ │ addl $0x1,-0x4(%rbp)
0.11 │ │↑ jmp 11
│26:└─→mov -0x14(%rbp),%eax
and 'o' output prints:
86.52 │4005┌── ↓ ja 40056c <foo(int, int)+0x26>
13.37 │4005│0: mov -0x18(%rbp),%eax
│4005│3: add %eax,-0x14(%rbp)
│4005│6: addl $0x1,-0x4(%rbp)
0.11 │4005│a: ↑ jmp 400557 <foo(int, int)+0x11>
│4005└─→ mov -0x14(%rbp),%eax
On the contrary, compiling the very same file with gcc -x c, the parsing
is fine because function arguments are not displayed:
jmp 400543 <foo+0x1d>
Committer testing:
Before:
$ cat cpp_args_annotate.c
int
foo(int a, int b)
{
for (unsigned i = 0; i < 1000000000; i++)
a += b;
return a;
}
int main()
{
foo (3, 4);
return 0;
}
$ gcc --version |& head -1
gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9)
$ gcc -g cpp_args_annotate.c -o cpp_args_annotate
$ perf record ./cpp_args_annotate
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.275 MB perf.data (7188 samples) ]
$ perf annotate --stdio2 foo
Samples: 7K of event 'cycles:u', 4000 Hz, Event count (approx.): 7468429289, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo>:
foo():
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
↓ jmp 1d
a += b;
13.45 13: mov -0x18(%rbp),%eax
add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.09 1d: cmpl $0x3b9ac9ff,-0x4(%rbp)
86.46 ↑ jbe 13
return a;
mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
I.e. works for C, now lets switch to C++:
$ g++ -g cpp_args_annotate.c -o cpp_args_annotate
$ perf record ./cpp_args_annotate
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.268 MB perf.data (6976 samples) ]
$ perf annotate --stdio2 foo
Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo(int, int)>:
foo(int, int):
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
cmpl $0x3b9ac9ff,-0x4(%rbp)
86.53 → ja 40112c <foo(int, int)+0x26>
a += b;
13.32 mov -0x18(%rbp),%eax
0.00 add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.15 → jmp 401117 <foo(int, int)+0x11>
return a;
mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
Reproduced.
Now with this patch:
Reusing the C++ built binary, as we can see here:
$ readelf -wi cpp_args_annotate | grep producer
<c> DW_AT_producer : (indirect string, offset: 0x2e): GNU C++14 10.2.1 20201125 (Red Hat 10.2.1-9) -mtune=generic -march=x86-64 -g
$
And furthermore:
$ file cpp_args_annotate
cpp_args_annotate: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=4fe3cab260204765605ec630d0dc7a7e93c361a9, for GNU/Linux 3.2.0, with debug_info, not stripped
$ perf buildid-list -i cpp_args_annotate
4fe3cab260204765605ec630d0dc7a7e93c361a9
$ perf buildid-list | grep cpp_args_annotate
4fe3cab260204765605ec630d0dc7a7e93c361a9 /home/acme/c/cpp_args_annotate
$
It now works:
$ perf annotate --stdio2 foo
Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo(int, int)>:
foo(int, int):
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
11: cmpl $0x3b9ac9ff,-0x4(%rbp)
86.53 ↓ ja 26
a += b;
13.32 mov -0x18(%rbp),%eax
0.00 add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.15 ↑ jmp 11
return a;
26: mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lore.kernel.org/lkml/13e1a405-edf9-e4c2-4327-a9b454353730@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As started by commit 05a5f51ca5 ("Documentation: Replace lkml.org
links with lore"), replace lkml.org links with lore to better use a
single source that's more likely to stay available long-term.
Signed-off-by: Kees Kook <keescook@chromium.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lore.kernel.org/lkml/20210210234220.2401035-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'lock' command ensuring only one instance
of daemon can run over one base directory.
Committer testing:
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 793255
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [793506]'
signal 12 sent to session 'test [793506]'
test daemon ping
test daemon lock
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-25-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'ping' command. The tests verifies the
ping command gets proper answer from sessions.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 792143
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [792415]'
signal 12 sent to session 'test [792415]'
test daemon ping
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'signal' command. The test sends a signal
to configured sessions and verifies the perf data files were generated
accordingly.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 790017
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [790268]'
signal 12 sent to session 'test [790268]'
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'stop' command. The test stops the daemon
and verifies all the configured sessions are properly terminated.
Committer testing:
[root@five ~]# time perf test daemon
76: daemon operations : Ok
[root@five ~]# time perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 788560
test daemon list
test daemon reconfig
test daemon stop
test child finished with 0
---- end ----
daemon operations: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for daemon reconfiguration. The test changes the
configuration file and checks that the session is changed properly.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# time perf test daemon
76: daemon operations : Ok
real 0m6.055s
user 0m0.174s
sys 0m0.147s
[root@five ~]# time perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 786863
test daemon list
test daemon reconfig
test child finished with 0
---- end ----
daemon operations: Ok
real 0m6.127s
user 0m0.222s
sys 0m0.165s
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test for basic perf daemon listing via the CSV output mode (-x
option).
Check that the configured sessions display expected values.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]#
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 785037
test daemon list
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add usage examples to the man page.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the 'stop' control command to stop perf record session. If that
fails, fall back to current SIGTERM/SIGKILL pair.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'ping' command to verify that the 'perf record' session is up and
operational.
It's used in the following patches via test code to make sure 'perf
record' is ready to receive signals.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Start the daemon:
# perf daemon start
Ping all sessions:
# perf daemon ping
OK cycles
OK sched
Ping specific session:
# perf daemon ping --session sched
OK sched
Committer notes:
Fixed up bug pointed by clang:
Buggy:
if (!pollfd.revents & POLLIN)
Correct code:
if (!(pollfd.revents & POLLIN))
clang warning:
builtin-daemon.c:560:6: error: logical not is only applied to the left hand side of this bitwise operator [-Werror,-Wlogical-not-parentheses]
if (!pollfd.revents & POLLIN) {
^ ~
builtin-daemon.c:560:6: note: add parentheses after the '!' to evaluate the bitwise operator first
Also use designated initialized with pollfd, i.e.:
struct pollfd pollfd = { .events = POLLIN, };
Instead of:
struct pollfd pollfd = { 0, };
To get past:
builtin-daemon.c:510:30: error: missing field 'events' initializer [-Werror,-Wmissing-field-initializers]
struct pollfd pollfd = { 0, };
^
1 error generated.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
