Commit Graph

256 Commits

Author SHA1 Message Date
Sven Joachim
d1889589a4 builddeb: Fix rootless build in setuid/setgid directory
Building 5.10-rc1 in a setgid directory failed with the following
error:

dpkg-deb: error: control directory has bad permissions 2755 (must be
>=0755 and <=0775)

When building with fakeroot, the earlier chown call would have removed
the setgid bits, but in a rootless build they remain.

Fixes: 3e85418036 ("builddeb: Enable rootless builds")
Cc: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-11-02 11:31:00 +09:00
Masahiro Yamada
0fa21cf448 kbuild: deb-pkg: clean up package name variables
Hard-code the names of linux-headers and debug packages in the
control file.

The kernel package is different for ARCH=um. Change the code
for better readability.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-10-14 12:49:39 +09:00
Masahiro Yamada
bac977cbc0 kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
Since commit 269a535ca9 ("modpost: generate vmlinux.symvers and
reuse it for the second modpost"), with CONFIG_MODULES disabled,
"make deb-pkg" (or "make bindeb-pkg") fails with:

  find: ‘Module.symvers’: No such file or directory

If CONFIG_MODULES is disabled, it doesn't really make sense to build
the linux-headers package.

Fixes: 269a535ca9 ("modpost: generate vmlinux.symvers and reuse it for the second modpost")
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-10-14 12:49:34 +09:00
Guillem Jover
76c3766876 builddeb: Add support for all required debian/rules targets
These have been required by the Debian policy for a while, even though
the tooling can detect and workaround their omission, but are a hard
requirement when using rootless builds.

[masahiro:
The following Debian policy is particularly important for rootless builds:
"Both binary-* targets should depend on the build target, or on the
 appropriate build-arch or build-indep target, so that the package is
 built if it has not been already."
]

Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-10-10 00:41:35 +09:00
Guillem Jover
3e85418036 builddeb: Enable rootless builds
This makes it possible to build the Debian packages without requiring
(pseudo-)root privileges, when the build drivers support this mode
of operation.

See-Also: /usr/share/doc/dpkg/rootless-builds.txt.gz
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-10-09 23:59:16 +09:00
Guillem Jover
51ccdbfbed builddeb: Pass -n to gzip for reproducible packages
We should not be encoding the timestamp, otherwise we end up generating
unreproducible files that cascade into unreproducible packages.

Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-10-09 23:57:30 +09:00
Masahiro Yamada
596b0474d3 kbuild: preprocess module linker script
There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)

The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.

You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.

scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.

You can add arch-specific sections in <asm/module.lds.h>.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
2020-09-25 00:36:41 +09:00
Alexander A. Klimov
16a122c743 kbuild: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-10 01:32:59 +09:00
Domenico Andreoli
55a87cd858 kbuild: buildtar: add dtbs support
Make 'make tar-pkg' install dtbs.

Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-07 11:13:11 +09:00
Denis Efremov
e4a42c82e9 kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp.
GZIP, BZIP2, LZOP env variables are reserved by the tools. The original
attempt to redefine them internally doesn't work in makefiles/scripts
intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in
broken builds. There can be other broken build commands because of this,
so the universal solution is to use non-reserved env variables for the
compression tools.

Fixes: 8dfb61dcba ("kbuild: add variables for compression tools")
Signed-off-by: Denis Efremov <efremov@linux.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-11 20:14:41 +09:00
Denis Efremov
8dfb61dcba kbuild: add variables for compression tools
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2

Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.

The credit goes to @grsecurity.

As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"

Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06 23:42:01 +09:00
Reinhard Karcher
d9dac147a2 kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
Creating a Debian package without CONFIG_DEBUG_INFO produces
a warning that no debug package was created.

This patch excludes the debug package from the control file,
if no debug package is created by this configuration.

Signed-off-by: Reinhard Karcher <reinhard.karcher@gmx.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-30 09:23:00 +09:00
Masahiro Yamada
451dff37f0 builddeb: split libc headers deployment out into a function
Deploy user-space headers (linux-libc-dev package) in a separate
function for readability.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
3126c17d28 builddeb: split kernel headers deployment out into a function
Deploy kernel headers (linux-headers package) in a separate function
for readability.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
aae6a67124 builddeb: remove redundant make for ARCH=um
The kernel build has already been done before builddeb is invoked.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
9a92eee387 builddeb: avoid invoking sub-shells where possible
The commands surrounded by ( ... ) is run in a sub-shell, but you do
not have to spawn a sub-shell for every single line.

Use just one ( ... ) for creating debian/hdrsrcfiles.

For tar, use -C option instead.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
f9a4711ebb builddeb: remove redundant $objtree/
This script works only when it is invoked in the $objtree, that is,
it is already relying on $objtree is '.'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
1694e94e4f builddeb: match temporary directory name to the package name
The temporary directory names, debian/hdrtmp (linux-headers package)
vs debian/headertmp (linux-libc-dev package), are confusing.

Matching the directory name to the package name is clearer, IMHO.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
7e61b167eb builddeb: remove unneeded files in hdrobjfiles for headers package
- We do not need tools/objtool/fixdep or tools/objtool/sync-check.sh
   for building external modules. Including tools/objtool/objtool is
   enough.

 - gcc-common.h is a check-in file. I do not see any point to search
   for it in objtree.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Michał Mirosław
1a7f0a34ea builddeb: allow selection of .deb compressor
Select deb compression using KDEB_COMPRESS make variable. This allows to
use gzip compression for local or test builds, and that's way faster
than now-default xz compression.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-22 00:56:48 +09:00
Michał Mirosław
9945722afd builddeb: make headers package thinner
Remove a bunch of files not used during external module builds:
 - foreign architecture headers
 - subtree Makefiles
 - Kconfig files
 - perl scripts

On amd64 system this looses a third of the resulting .deb size.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-14 10:42:44 +09:00
Ard Biesheuvel
8ffdc54b6f kbuild/deb-pkg: annotate libelf-dev dependency as :native
Cross compiling the x86 kernel on a non-x86 build machine produces
the following error when CONFIG_UNWINDER_ORC is enabled, regardless
of whether libelf-dev is installed or not.

  dpkg-checkbuilddeps: error: Unmet build dependencies: libelf-dev
  dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
  dpkg-buildpackage: warning: (Use -d flag to override.)

Since this is a build time dependency for a build tool, we need to
depend on the native version of libelf-dev so add the appropriate
annotation.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-04 00:00:48 +09:00
Enrico Weigelt, metux IT consult
a11391b6f5 scripts: package: mkdebian: add missing rsync dependency
We've missed the dependency to rsync, so build fails on
minimal containers.

Fixes: 59b2bd05f5 ("kbuild: add 'headers' target to build up uapi headers in usr/include")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-12-17 19:23:10 +09:00
Matteo Croce
af7db99a1c kbuild: Add make dir-pkg build option
Add a 'dir-pkg' target which just creates the same directory structures
as in tar-pkg, but doesn't package anything.
Useful when the user wants to copy the kernel tree on a machine using
ssh, rsync or whatever.

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11 20:10:01 +09:00
Masahiro Yamada
000ec95fbe kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package
scripts/package/Makefile does not use $(obj) or $(src) at all.
It actually generates files and directories in the top of $(objtree).
I do not see much sense in descending into scripts/package/.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-25 07:42:00 +09:00
Masahiro Yamada
6a4f6a26d3 kbuild: pkg: add package targets to PHONY instead of FORCE
These are not real targets. Adding them to PHONY is preferred.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-25 07:39:26 +09:00
Masahiro Yamada
46a63d4b0d kbuild: pkg: clean up package files/dirs from the top Makefile
I am not a big fan of the $(objtree)/ hack for clean-files/clean-dirs.

These are created in the top of $(objtree), so let's clean them up
from the top Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-25 07:39:21 +09:00
Masahiro Yamada
b7dca6dd1e kbuild: create *.mod with full directory path and remove MODVERDIR
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.

To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.

Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.

$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.

Stephen Rothwell reported a race condition caused by a module name
conflict:

  https://lkml.org/lkml/2019/5/13/991

In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.

Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.

However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.

To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.

$(MODVERDIR) is no longer needed.

Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.

I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
2019-07-18 02:19:31 +09:00
Cedric Hombourger
5a46421789 builddeb: generate multi-arch friendly linux-libc-dev package
Debian-based distributions place libc header files in a machine
specific directory (/usr/include/<libc-machine>) instead of
/usr/include/asm to support installation of the linux-libc-dev
package from multiple architectures. Move headers installed by
"make headers_install" accordingly using Debian's tuple from
dpkg-architecture (stored in debian/arch).

Signed-off-by: Cedric Hombourger <Cedric_Hombourger@mentor.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17 10:25:10 +09:00
Masahiro Yamada
c93a0368aa kbuild: do not create wrappers for header-test-y
header-test-y does not work with headers in sub-directories.

For example, you may want to write a Makefile, like this:

include/linux/Kbuild:

  header-test-y += mtd/nand.h

This entry will create a wrapper include/linux/mtd/nand.hdrtest.c
with the following content:

  #include "mtd/nand.h"

To make this work, we need to add $(srctree)/include/linux to the
header search path. It would be tedious to add ccflags-y.

Instead, we could change the *.hdrtest.c rule to wrap:

  #include "nand.h"

This works for in-tree build since #include "..." searches in the
relative path from the header with this directive. For O=... build,
we need to add $(srctree)/include/linux/mtd to the header search path,
which will be even more tedious.

After all, I thought it would be handier to compile headers directly
without creating wrappers.

I added a new build rule to compile %.h into %.h.s

The target is %.h.s instead of %.h.o because it is slightly faster.
Also, as for GCC, an empty assembly is smaller than an empty object.

I wrote the build rule:

  $(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<

instead of:

  $(CC) $(c_flags) -S -o $@ -x c $<

Both work fine with GCC, but the latter is bad for Clang.

This comes down to the difference in the -Wunused-function policy.
GCC does not warn about unused 'static inline' functions at all.
Clang does not warn about the ones in included headers, but does
about the ones in the source. So, we should handle headers as
headers, not as source files.

In fact, this has been hidden since commit abb2ea7dfd ("compiler,
clang: suppress warning for unused static inline functions"), but we
should not rely on that.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
2019-07-09 10:10:27 +09:00
Masahiro Yamada
0315bb7a25 kbuild: deb-pkg: do not run headers_check
It is absolutely fine to add extra sanity checks in package scripts,
but it is not necessary to do so.

This is already covered by the daily compile-testing (0day bot etc.)
because headers_check is run as a part of the normal build process
when CONFIG_HEADERS_CHECK=y.

Replace it with the newly-added "make headers".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:02 +09:00
Trevor Bourget
a6e0487709 kbuild: tar-pkg: enable communication with jobserver
The buildtar script might want to invoke a make, so tell the parent
make to pass the jobserver token pipe to the subcommand by prefixing
the command with a +.

This addresses the issue seen here:

  /bin/sh ../scripts/package/buildtar tar-pkg
  make[3]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.

See https://www.gnu.org/software/make/manual/html_node/Job-Slots.html
for more information.

Signed-off-by: Trevor Bourget <tgb.kernel@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-05 02:33:10 +09:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Arseny Maslennikov
f6d9db6355 kbuild: deb-pkg: avoid implicit effects
* The man page for dpkg-source(1) notes:

>      -b, --build directory [format-specific-parameters]
>             Build  a  source  package  (--build since dpkg 1.17.14).
>             <...>
>
>             dpkg-source will build the source package with the first
>             format found in this ordered list: the format  indicated
>             with  the  --format  command  line  option,  the  format
>             indicated in debian/source/format, “1.0”.  The  fallback
>             to “1.0” is deprecated and will be removed at some point
>             in the future, you should always  document  the  desired
>             source   format  in  debian/source/format.  See  section
>             SOURCE PACKAGE FORMATS for an extensive  description  of
>             the various source package formats.

  Thus it would be more foolproof to explicitly use 1.0 (as we always
  did) than to rely on dpkg-source's defaults.

* In a similar vein, debian/rules is not made executable by mkdebian,
  and dpkg-source warns about that but still silently fixes the file.
  Let's be explicit once again.

Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17 12:56:23 +09:00
Masahiro Yamada
6fb7ef5a34 kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG
This will be a little more efficient since unset CONFIG options are
stripped away from auto.conf, and we can hard-code the path to auto.conf
since it is never overridden.

include/config/kernel.release is generated before %pkg is run.
So, it is guaranteed auto.conf is up-to-date.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-14 02:39:13 +09:00
Masahiro Yamada
515f4c633d kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb
I think is_enabled() and if_enable_echo() in scripts/package/mkdebian
are useful.

builddeb also has many repetitive greps over the kernel config, so I
borrowed the idea to clean it up.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-14 02:39:12 +09:00
Masahiro Yamada
7e548e9a54 kbuild: deb-pkg: add CONFIG_ prefix to kernel config options
This might be a kind of bike-shed, but I personally prefer grep'able
code.

I often do 'git grep CONFIG_FOO' instead of 'git grep FOO' when I
want to know where that CONFIG option is used.

This makes code longer, but I hope this is acceptable level.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-14 02:39:12 +09:00
Riku Voipio
e3a2285066 deb-pkg: generate correct build dependencies
bison/flex is now needed always for building for kconfig. Some build
dependencies depend on kernel configuration, enable them as needed:

- libelf-dev when UNWINDER_ORC is set
- libssl-dev for SYSTEM_TRUSTED_KEYRING

Since the libssl-dev is needed for extract_cert binary, denote with
:native to install the libssl-dev for the build machines architecture,
rather than for the architecture of the kernel being built.

Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <maks@stro.at>
[masahiro.yamada: change 'flex' to 'flex | flex:native' ]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-14 02:30:26 +09:00
Kacper Kołodziej
117948ac74 kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
DPKG_FLAGS variable lets user to add more flags to dpkg-buildpackage
command in deb-pkg and bindeb-pkg.

Signed-off-by: Kacper Kołodziej <kacper@kolodziej.it>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-28 22:50:54 +09:00
Masahiro Yamada
175209cce2 kbuild: pkg: use -f $(srctree)/Makefile to recurse to top Makefile
'$(MAKE) KBUILD_SRC=' changes the working directory back and forth
between objtree and srctree.

It is better to recurse to the top-level Makefile directly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-20 09:42:46 +09:00
Masahiro Yamada
5439f09f48 kbuild: remove redundant 'set -e' from cmd_* defines
These three cmd_* are invoked in the $(call cmd,*) form.

Now that 'set -e' moved to the 'cmd' macro, they do not need to
explicitly give 'set -e'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01 23:13:14 +09:00
Rob Herring
d5615e472d builddeb: Fix inclusion of dtbs in debian package
Commit 37c8a5fafa ("kbuild: consolidate Devicetree dtb build rules")
moved the location of 'dtbs_install' target which caused dtbs to not be
installed when building debian package with 'bindeb-pkg' target. Update
the builddeb script to use the same logic that determines if there's a
'dtbs_install' target which is presence of the arch dts directory. Also,
use CONFIG_OF_EARLY_FLATTREE instead of CONFIG_OF as that's a better
indication of whether we are building dtbs.

This commit will also have the side effect of installing dtbs on any
arch that has dts files. Previously, it was dependent on whether the
arch defined 'dtbs_install'.

Fixes: 37c8a5fafa ("kbuild: consolidate Devicetree dtb build rules")
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-11 23:04:53 +09:00
Masahiro Yamada
bbcde0a724 kbuild: deb-pkg: fix too low build version number
Since commit b41d920acf ("kbuild: deb-pkg: split generating packaging
and build"), the build version of the kernel contained in a deb package
is too low by 1.

Prior to the bad commit, the kernel was built first, then the number
in .version file was read out, and written into the debian control file.

Now, the debian control file is created before the kernel is actually
compiled, which is causing the version number mismatch.

Let the mkdebian script pass KBUILD_BUILD_VERSION=${revision} to require
the build system to use the specified version number.

Fixes: b41d920acf ("kbuild: deb-pkg: split generating packaging and build")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Doug Smythies <dsmythies@telus.net>
2018-11-11 23:04:52 +09:00
Masahiro Yamada
02826a6ba3 kbuild: deb-pkg: fix bindeb-pkg breakage when O= is used
Ard Biesheuvel reports bindeb-pkg with O= option is broken in the
following way:

  ...
    LD [M]  sound/soc/rockchip/snd-soc-rk3399-gru-sound.ko
    LD [M]  sound/soc/rockchip/snd-soc-rockchip-pcm.ko
    LD [M]  sound/soc/rockchip/snd-soc-rockchip-rt5645.ko
    LD [M]  sound/soc/rockchip/snd-soc-rockchip-spdif.ko
    LD [M]  sound/soc/sh/rcar/snd-soc-rcar.ko
   fakeroot -u debian/rules binary
  make KERNELRELEASE=4.19.0-12677-g19beffaf7a99-dirty ARCH=arm64 KBUILD_SRC= intdeb-pkg
  /bin/bash /home/ard/linux/scripts/package/builddeb
  Makefile:600: include/config/auto.conf: No such file or directory
  ***
  *** Configuration file ".config" not found!
  ***
  *** Please run some configurator (e.g. "make oldconfig" or
  *** "make menuconfig" or "make xconfig").
  ***
  make[12]: *** [syncconfig] Error 1
  make[11]: *** [syncconfig] Error 2
  make[10]: *** [include/config/auto.conf] Error 2
  make[9]: *** [__sub-make] Error 2
  ...

Prior to commit 80463f1b7b ("kbuild: add --include-dir flag only
for out-of-tree build"), both srctree and objtree were added to
--include-dir redundantly, and the wrong code '$MAKE image_name'
was working by relying on that. Now, the potential issue that had
previously been hidden just showed up.

'$MAKE image_name' recurses to the generated $(objtree)/Makefile and
ends up with running in srctree, which is incorrect. It should be
invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed
in objtree.

Fixes: 80463f1b7b ("kbuild: add --include-dir flag only for out-of-tree build")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-11-06 01:29:00 +09:00
Masahiro Yamada
21b42eb468 kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used
Zhenzhong Duan reported that running 'make O=/build/kernel binrpm-pkg'
failed with the following errors:

  Running 'make O=/build/kernel binrpm-pkg' failed with below two errors.

  Makefile:600: include/config/auto.conf: No such file or directory

  + cp make -C /mnt/root/kernel O=/build/kernel image_name make -f
  /mnt/root/kernel/Makefile ...
  cp: invalid option -- 'C'
  Try 'cp --help' for more information.

Prior to commit 80463f1b7b ("kbuild: add --include-dir flag only
for out-of-tree build"), both srctree and objtree were added to
--include-dir redundantly, and the wrong code 'make image_name'
was working by relying on that. Now, the potential issue that had
previously been hidden just showed up.

'make image_name' recurses to the generated $(objtree)/Makefile and
ends up with running in srctree, which is incorrect. It should be
invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed
in objtree.

Fixes: 80463f1b7b ("kbuild: add --include-dir flag only for out-of-tree build")
Reported-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-06 01:28:48 +09:00
Ben Hutchings
79a85b55e3 builddeb: Add automatic support for sh{3,4}{,eb} architectures
Different generations of the SH architecture are not very compatible,
so there are/were separate Debian ports for SH3 and SH4.

Move the fallback out of the "case" statement, so that it will also be
used in case we find some SH architecture version without a known
mapping.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-28 10:53:44 +09:00
Ben Hutchings
75ebcee769 builddeb: Add automatic support for riscv* architectures
Debian currently only defines "riscv64", but it seems safe to assume
that any 32-bit port will now be called "riscv32", also matching
$UTS_MACHINE.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-28 10:53:44 +09:00
Ben Hutchings
60ca40a064 builddeb: Add automatic support for m68k architecture
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-28 10:53:44 +09:00
Ben Hutchings
822f44fb5b builddeb: Add automatic support for or1k architecture
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-28 10:53:44 +09:00
Ben Hutchings
a27ae285d5 builddeb: Add automatic support for sparc64 architecture
We currently label 64-bit kernel packages as sparc (32-bit), mostly
because it was officially supported while sparc64 was not.  Now
neither is officially supported, so label these packages as sparc64.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-28 10:53:44 +09:00