The multi-link synchronization uses the same concept and registers,
but moved to the HDAudio extended links.
Add helpers for sync_arm and sync_go which are the basic for the bus
reset, bank switch and clock stop.
Since SoundWire is the only user of those helpers, only expose the
_unlocked versions for now.
Note that SYNCGO is a write-only bit, so no error can be reported. We
still return 0 for compatibility with the SoundWire stream management
headers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These helpers configure the ratio between the base clock and the
hardware signal used for link synchronization.
The SYNCPRD is written before the first sublink is powered-up. The
SYNCPU bit is set, but it will only be cleared after the link is
powered-up, hence the implementation with a set/wait pattern.
These helpers are currently only needed by SoundWire support, where
the lock is taken at a higher level, so only the _unlocked versions
are exposed for now.
Note that the _wait_bit() implementation is similar to previous
helpers in drivers/soundwire, but with sleep duration and timeout
aligned with hardware recommendations. If desired, this helper could
be modified in a second step with e.g. readl_poll_timeout().
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When INTC is set, LCTL exposes INTEN and INTSTS fields.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is needed for SoundWire integration.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The updated SoundWire Intel driver will need to rely on Extended
HDaudio links for power management, but it doesn't need to be aware of
all the HDaudio structures. Add convenience helpers to avoid polluting
SoundWire drivers too much with HDaudio information.
Since the SoundWire/Intel solution already takes the lock at a higher
level, the _unlocked PM helpers are used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helpers to program SPA/CPA bits, using a mutex to access the
shared LCTL register if required.
All links are managed with the same LCTLx.SPA bits. However there are
quite a few implementation details to be aware of:
Legacy HDaudio multi-links are powered-up when exiting reset, which
requires the ref_count to be manually set to one when initializing the
link.
Alternate links for SoundWire/DMIC/SSP need to be explicitly
powered-up before accessing the SHIM/IP/Vendor-Specific SHIM space for
each sublink. DMIC/SSP/SoundWire are all different cases with a
different device/dai/hlink relationship.
SoundWire will handle power management with the auxiliary device
resume/suspend routine. The ref_count is not necessary in this case.
The DMIC/SSP will by contrast handle the power management from DAI
.startup and .shutdown callbacks.
The SSP has a 1:1 mapping between sublink and DAI, but it's
bidirectional so the ref_count will help avoid turning off the sublink
when one of the two directions is still in use.
The DMIC has a single link but two DAIs for data generated at
different sampling frequencies, again the ref_count will make sure the
two DAIs can be used concurrently.
And last the SoundWire Intel require power-up/down and bank switch to
be handled with a lock already taken, so the 'eml_lock' is made
optional with the _unlocked versions of the helpers.
Note that the _check_power_active() implementation is similar to
previous helpers in sound/hda/ext, with sleep duration and timeout
aligned with hardware recommendations. If desired, this helper could
be modified in a second step with .e.g. readl_poll_timeout()
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For backwards compatibility, HDaudio/iDISP links are powered-on when
exiting reset, and the existing driver forces them to be powered-off
when entering S0ix. In addition, the get/put helpers are invoked
directly by the ASoC codec drivers, which a historical layering
violation.
Extended links are powered-on by software only, during the probe and
DAI startup phases. This calls for a different handling of the
'regular' and 'extended' audio links.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend hdac_ext_link to store information needed for ALT
links. Follow-up patches will include more functional patches for
power-up and down.
Note that this patch suggests the use of an 'eml_lock' to serialize
access to shared registers. SoundWire-specific sequence require the
lock to be taken at a higher level, as a result the helpers added in
follow-up patches will provide 'unlocked' versions when needed.
Also note that the low-level sequences with the 'hdaml_' prefix are
taken directly from the hardware specifications - naming conventions
included. The code will be split in two, with locking and linked-list
management handled separately to avoid mixing required hardware setup
and Linux-based resource management.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some of the functions will be used for SoundWire enumeration and power
management, to avoid cycles in module dependencies and simplify
integration all the HDaudio multi-link needs to move to a dedicated
module.
Drop no longer needed headers at the same time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add return value - this will need additional work in the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use list_for_each_entry_safe() instead of open-coding.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new definitions for the HDaudio Extended link support,
specifically new registers for SoundWire, Intel DMIC and INTEL SSP
interfaces.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add description of 'Skylake' multi-link structure added in 2015 and
recent extensions to support SoundWire/DMIC/SSP interfaces.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure SoundWire lcount helpers have unique error logs, but a
common pattern for reporting issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230406152937.15347-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
smatch reports
sound/soc/codecs/max98363.c:392:39: warning: symbol
'soc_codec_dev_max98363' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230406152300.1954292-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
Click/Pop Noise was a long pending issue with WSA Codecs which are prone
to accumlate DC when ports are active but without any data streams.
There are multiple places in the current setup, where this could happen
in both startup as well as shutdown path.
Smatch Warns:
sound/firewire/tascam/tascam-stream.c:493 snd_tscm_stream_start_duplex()
warn: missing unwind goto?
The direct return will cause the stream list of "&tscm->domain" unemptied
and the session in "tscm" unfinished if amdtp_domain_start() returns with
an error.
Fix this by changing the direct return to a goto which will empty the
stream list of "&tscm->domain" and finish the session in "tscm".
The snd_tscm_stream_start_duplex() function is called in the prepare
callback of PCM. According to "ALSA Kernel API Documentation", the prepare
callback of PCM will be called many times at each setup. So, if the
"&d->streams" list is not emptied, when the prepare callback is called
next time, snd_tscm_stream_start_duplex() will receive -EBUSY from
amdtp_domain_add_stream() that tries to add an existing stream to the
domain. The error handling code after the "error" label will be executed
in this case, and the "&d->streams" list will be emptied. So not emptying
the "&d->streams" list will not cause an issue. But it is more efficient
and readable to empty it on the first error by changing the direct return
to a goto statement.
The session in "tscm" has been begun before amdtp_domain_start(), so it
needs to be finished when amdtp_domain_start() fails.
Fixes: c281d46a51 ("ALSA: firewire-tascam: support AMDTP domain")
Signed-off-by: Xu Biang <xubiang@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230406132801.105108-1-xubiang@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
unpreparing/disabling and preparing/reenabling soundwire ports is not required
for every prepare call, this add lots of click and pop noise if we do this in
middle of playback or capture.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230323164403.6654-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On multiple prepare calls, its possible that the playback graphs are
not unloaded from the DSP, which can have some wierd side-effects,
one of them is that the data not consumed without any errors.
Fixes: c2ac3aec474d("ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230323164403.6654-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial codec driver for rt712 SDCA (Mic topology).
The host should connect with rt712 SdW2 interface.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230406085535.52002-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dapm_connect_dai_pair() handles
"Normal/Codec2Codec" x "CPU/Codec" x "Playback/Capture".
(A) is "Codec2Codec" case of "CPU" widget x "Playback/Capture",
(B) is "Normal" case of "CPU" widget x "Playback/Capture",
(C) is each case of "Codec" widget.
(X) is handling "Playback" case DAI connecting,
(Y) is handling "Capture" case DAI connecting.
static void dapm_connect_dai_pair(...)
{
...
(A) if (dai_link->params) {
playback_cpu = ...
capture_cpu = ...
(B) } else {
playback_cpu = ...
capture_cpu = ...
}
^ /* connect BE DAI playback if widgets are valid */
| stream = SNDRV_PCM_STREAM_PLAYBACK;
| (C) codec = codec_dai->playback_widget;
|
| if (playback_cpu && codec) {
(X) if (dai_link->params && !rtd->c2c_widget[stream]) {
| ...
| }
|
| (z) dapm_connect_dai_routes(...);
v }
capture:
^ /* connect BE DAI capture if widgets are valid */
| stream = SNDRV_PCM_STREAM_CAPTURE;
| (C) codec = codec_dai->capture_widget;
|
| if (codec && capture_cpu) {
(Y) if (dai_link->params && !rtd->c2c_widget[stream]) {
| ...
| }
|
| (z) dapm_connect_dai_routes(...);
v }
}
(X) part and (Y) part are almost same.
Main purpose of these parts (and this function) is calling
dapm_connect_dai_routes() (= z) on each cases.
The difference is "parameter"
(= Normal/Codec2Codec x CPU/Codec x Playback/Capture).
This patch cleanup these, but nothing changed for meaning.
Link: https://lore.kernel.org/r/87ilen6ni4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cuqvswc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The newer E-MU cards weren't mentioned at all.
The "partially supported" is removed ahead of it becoming mostly untrue.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230405201220.2197908-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It could have never worked, as snd_emu10k1_fx8010_playback_prepare() and
snd_emu10k1_fx8010_playback_hw_free() assume the emu10k1 offset for the
ETRAM, and the default DSP code includes no handler for it. It also
wouldn't make a lot of sense to make it work, as Audigy has an own, much
simpler, pass-through mechanism. So just skip creation of the device.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197938-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.
While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.
Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_cs8427_iec958_active() would always delete
SNDRV_CTL_ELEM_ACCESS_INACTIVE, even though the function has an
argument `active`.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201219.2197811-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is supporting Codec2Codec, but its parameter name is
"params" and "num_params" which are very unclear naming.
This patch-set clarifies it by replacing to c2c_params / num_c2c_params.
ASoC is now using c2c_params instead of params. This patch replace it.
num_c2c_params (was num_params) was not mandatory before,
but let's set it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzytc2kp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now using c2c_params instead of params. This patch replace it.
num_c2c_params (was num_params) was not mandatory before,
but let's set it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lej9c2ky.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_link has params/num_params, but it is unclear that
params for what. This patch clarify it is params for Codec2Codec.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7o5c2lk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the AK4458 audio DAC bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230328091831.55690-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With PCI if the device was suspended it is brought back to full
power and then suspended again.
This doesn't happen when device is described via DT.
We need to make sure that we tear down pipelines only if the device
was previously active (thus the pipelines were setup).
Otherwise, we can break the use_count:
[ 219.009743] sof-audio-of-imx8m 3b6e8000.dsp:
sof_ipc3_tear_down_all_pipelines: widget PIPELINE.2.SAI3.IN is still in use: count -1
and after this everything stops working.
Fixes: d185e0689a ("ASoC: SOF: pm: Always tear down pipelines before DSP suspend")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230405092655.19587-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series will add support for SOF Linux stack to run without using the DSP.
DSPless mode provides a good tool for verification that the hardware itself
works correctly by taking the DSP use out from the picture.
It can only work with interfaces which supports this mode: Intel HDA at the
moment but with LNL it could be possible to support other audio interfaces.
The main driver for this mode is to be able to test programming sequences,
low-level code and for low-level verification of a platform.
The feature is not targetted for end-users and it will not make the SOF stack
to work on hardware without DSP, but it is giving us a tool to debug and enable
platforms earlier (when for example t he firmware is not mature enough).
Smatch Warns:
sound/soc/tegra/tegra20_ac97.c:321 tegra20_ac97_platform_probe()
warn: missing unwind goto?
The goto will set the "soc_ac97_ops" and "soc_ac97_bus" operations to
NULL. But they are already NULL at this point so it is a no-op.
However, just for consistency, change the direct return to a goto. No
functional change.
Signed-off-by: Zihao Wang <u202012060@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230404084622.1202-1-u202012060@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for tgl/adl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for skl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for mtl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for icl/jsl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for cnl/cfl/cml family to
allow DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for apl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the DSP is disabled in the BIOS, the DSP_BAR and PP_BAR cannot be
accessed.
One possible objection noted in initial reviews is that this patch
adds a number of branches. However the number of branches is actually
limited in probe/suspend/resume routines mostly, so there isn't really
a degradation in terms of readability and maintainability. Adding yet
another level of abstraction/ops/callbacks would increase complexity
and not really help in terms of code reuse or readability and
maintainability. A split between controller and DSP driver would be
even more invasive.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Via the SOF_DBG_DSPLESS_MODE sof_debug flag the SOF stack can be asked to
not use the DSP for audio.
The use of DSPless mode is governed by the sdev->dspless_mode_selected
flag which is only going to be set if the user sets sof_debug=0x8000 and
the platform advertises that the DSPless mode is supported on them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not all interfaces (SSP/DMIC/HDA/SDW) are available on all platforms.
If the interface is not even supported then there is no point in executing
a probe or query for that interface.
Introduce a simple function (hda_get_interface_mask) to query the
interfaces supported on the platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
