When enter elseif branch, the the MB_CHECK_ASSERT will never fail.
In addtion, the only illegal combination is 0/0, which can be caught
by the first if branch.
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220404152243.13556-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abstract away implementation details from file systems by providing a
block_device based helper to retrieve the discard granularity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the excess description of @bh in ext4_mb_clear_bb() kernel-doc
comment to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
fs/ext4/mballoc.c:5895: warning: Excess function parameter 'bh'
description in 'ext4_mb_clear_bb'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220301092136.34764-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds an extra checks in ext4_mb_mark_bb() function
to make sure we mark & report error if we were to mark/clear any
of the critical FS metadata specific bitmaps (&bail out) to prevent
from any accidental corruption.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/53cbb6f2573db162a57f935365050d8b1df202ee.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_mb_clear_bb() & ext4_group_add_blocks() only checks
whether the given block ranges (which is to be freed) belongs to any FS
metadata blocks or not, of the block's respective block group.
But to detect any FS error early, it is better to add more strict
checkings in those functions which checks whether the given blocks
belongs to any critical FS metadata or not within system-zone.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ddd9143d064774e32d6364a99667817c6e8bfdc0.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_set_bits() should actually be mb_set_bits() for uniform API naming
convention.
This is via below cmd -
grep -nr "ext4_set_bits" fs/ext4/ | cut -d ":" -f 1 | xargs sed -i 's/ext4_set_bits/mb_set_bits/g'
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f1f6ece1405b76a7a987e9145d1adfaf71e30695.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_free_blocks() function became too long and confusing, this patch
just pulls out the ext4_mb_clear_bb() function logic from it
which clears the block bitmap and frees it.
No functionality change in this patch
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/22c30fbb26ba409cf8aa5f0c7912970272c459e8.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
<...>
[ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters
[ 74.533214] EXT4-fs (loop3): shut down requested (2)
[ 74.536705] Aborting journal on device loop3-8.
[ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000
[ 74.703727] Faulting instruction address: 0xc0000000007bffb8
cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060]
pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0
lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0
sp: c000000015db7300
msr: 800000000280b033
dar: c00000005e980000
dsisr: 40000000
current = 0xc000000027af6880
paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01
pid = 5167, comm = mount
<...>
enter ? for help
[c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410
[c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000
[c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0
[c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0
[c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0
[c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10
[c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350
[c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40
[c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100
[c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70
[c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550
[c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0
[c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/2609bc8f66fc15870616ee416a18a3d392a209c4.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and
flex_group->free_clusters. This patch fixes that.
Identified based on code review of ext4_mb_mark_bb() function.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fix regression introduced as part of moving to the new mount API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmH7/AUACgkQ8vlZVpUN
gaOsuQf/TFH8QNBSeEkT5ybnrS51KGTv88mdUVMcsmSMhmAFxiGJLFtMLFu9LG7b
bJYCg+Q9Rieb1qqqtGNyLe4p3ewShSzBFu8p7hzKMfu0EEcrJwTYVywSX0oYhMMm
9o+V6CPcGYVZtImihdsmDvgMRRkzoevHQFx+OLhkaq4Qd9ZEdohchYIhRFNXwd+w
CJiL0TFAnrb4QfWgtq3HyY7aoQumf8YI15C+RTfykzCBhZRFRKXjVXPdIjfGe4O2
Fpjr4gSsgYK0Er0LLJvESeFFVpFz+NV7q9W/Vj5ahaKJDpiVGzL/OPZsnafzHPPy
CSa+iP3ZLcTb+KRTOZ1mgjvS34Cmyw==
=DpdZ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
For now in ext4_mb_new_blocks_simple, if we found a block which
should be excluded then will switch to next group, this may
probably cause 'group' run out of range.
Change to check next block in the same group when get a block should
be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP
and add error checking.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Remove PDE_DATA() completely and replace it with pde_data().
[akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c]
[akpm@linux-foundation.org: now fix it properly]
Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no good reason for the s_last_trim_minblks to be atomic. There is
no data integrity needed and there is no real danger in setting and
reading it in a racy manner. Change it to be unsigned long, the same type
as s_clusters_per_group which is the maximum that's allowed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20211103145122.17338-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason. After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.
CC: Lukas Czerner <lczerner@redhat.com>
Fixes: 5c2ed62fd4 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We found on older kernel (3.10) that in the scenario of insufficient
disk space, system may trigger an ABBA deadlock problem, it seems that
this problem still exists in latest kernel, try to fix it here. The
main process triggered by this problem is that task A occupies the PA
and waits for the jbd2 transaction finish, the jbd2 transaction waits
for the completion of task B's IO (plug_list), but task B waits for
the release of PA by task A to finish discard, which indirectly forms
an ABBA deadlock. The related calltrace is as follows:
Task A
vfs_write
ext4_mb_new_blocks()
ext4_mb_mark_diskspace_used() JBD2
jbd2_journal_get_write_access() -> jbd2_journal_commit_transaction()
->schedule() filemap_fdatawait()
| |
| Task B |
| do_unlinkat() |
| ext4_evict_inode() |
| jbd2_journal_begin_ordered_truncate() |
| filemap_fdatawrite_range() |
| ext4_mb_new_blocks() |
-ext4_mb_discard_group_preallocations() <-----
Here, try to cancel ext4_mb_discard_group_preallocations() internal
retry due to PA busy, and do a limited number of retries inside
ext4_mb_discard_preallocations(), which can circumvent the above
problems, but also has some advantages:
1. Since the PA is in a busy state, if other groups have free PAs,
keeping the current PA may help to reduce fragmentation.
2. Continue to traverse forward instead of waiting for the current
group PA to be released. In most scenarios, the PA discard time
can be reduced.
However, in the case of smaller free space, if only a few groups have
space, then due to multiple traversals of the group, it may increase
CPU overhead. But in contrast, I feel that the overall benefit is
better than the cost.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1637630277-23496-1-git-send-email-brookxu.cn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
As commit 6920b39132 ("ext4: add new helper interface
ext4_try_to_trim_range()") moves some code into the separate function
ext4_try_to_trim_range(), the use of the variable ret within that
function is more limited and can be adjusted as well.
Scope the use of the variable ret locally and drop dead assignments.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210820120853.23134-1-lukas.bulwahn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add sparse annotations to suppress false positive context imbalance
warnings, and use NULL instead of 0 in EXT_MAX_{EXTENT,INDEX}.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The background discard kwork tries to mark blocks used and issue
discard. This can make filesystem suffer from NOSPC error, xfstest
generic/371 can fail due to it. Fix it by flushing discard kwork
in ext4_should_retry_alloc. At the same time, give up discard at
the moment.
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Link: https://lore.kernel.org/r/20210830075246.12516-6-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Right now, discard is issued and waited to be completed in jbd2
commit kthread context after the logs are committed. When large
amount of files are deleted and discard is flooding, jbd2 commit
kthread can be blocked for long time. Then all of the metadata
operations can be blocked to wait the log space.
One case is the page fault path with read mm->mmap_sem held, which
wants to update the file time but has to wait for the log space.
When other threads in the task wants to do mmap, then write mmap_sem
is blocked. Finally all of the following read mmap_sem requirements
are blocked, even the ps command which need to read the /proc/pid/
-cmdline. Our monitor service which needs to read /proc/pid/cmdline
used to be blocked for 5 mins.
This patch frees the blocks back to buddy after commit and then do
discard in a async kworker context in fstrim fashion, namely,
- mark blocks to be discarded as used if they have not been allocated
- do discard
- mark them free
After this, jbd2 commit kthread won't be blocked any more by discard
and we won't get NOSPC even if the discard is slow or throttled.
Link: https://marc.info/?l=linux-kernel&m=162143690731901&w=2
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Link: https://lore.kernel.org/r/20210830075246.12516-5-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no functional change in this patch but just split the
codes, which serachs free block and does trim, into a new function
ext4_try_to_trim_range. This is preparing for the following async
backgroup discard.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210724074124.25731-3-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Get rid of the 'group' parameter of ext4_trim_extent as we can get
it from the 'e4b'.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210724074124.25731-2-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 5d1b1b3f49 ("ext4: fix BUG when calling ext4_error with locked
block group") introduces ext4_grp_locked_error to handle unlocking a
group in error cases. Otherwise, there is a possibility of a sleep while
atomic. However, since 43c73221b3 ("ext4: replace BUG_ON with WARN_ON
in mb_find_extent()"), mb_find_extent() has contained a ext4_error()
call while a group spinlock is held. Replace this with
ext4_grp_locked_error.
Fixes: 43c73221b3 ("ext4: replace BUG_ON with WARN_ON in mb_find_extent()")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20210623232114.34457-1-stephen.s.brennan@oracle.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Made suggested modifications from checkpatch in reference to ERROR:
trailing whitespace
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20210409042035.15516-1-jack.qiu@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of traversing through groups linearly, scan groups in specific
orders at cr 0 and cr 1. At cr 0, we want to find groups that have the
largest free order >= the order of the request. So, with this patch,
we maintain lists for each possible order and insert each group into a
list based on the largest free order in its buddy bitmap. During cr 0
allocation, we traverse these lists in the increasing order of largest
free orders. This allows us to find a group with the best available cr
0 match in constant time. If nothing can be found, we fallback to cr 1
immediately.
At CR1, the story is slightly different. We want to traverse in the
order of increasing average fragment size. For CR1, we maintain a rb
tree of groupinfos which is sorted by average fragment size. Instead
of traversing linearly, at CR1, we traverse in the order of increasing
average fragment size, starting at the most optimal group. This brings
down cr 1 search complexity to log(num groups).
For cr >= 2, we just perform the linear search as before. Also, in
case of lock contention, we intermittently fallback to linear search
even in CR 0 and CR 1 cases. This allows us to proceed during the
allocation path even in case of high contention.
There is an opportunity to do optimization at CR2 too. That's because
at CR2 we only consider groups where bb_free counter (number of free
blocks) is greater than the request extent size. That's left as future
work.
All the changes introduced in this patch are protected under a new
mount option "mb_optimize_scan".
With this patchset, following experiment was performed:
Created a highly fragmented disk of size 65TB. The disk had no
contiguous 2M regions. Following command was run consecutively for 3
times:
time dd if=/dev/urandom of=file bs=2M count=10
Here are the results with and without cr 0/1 optimizations introduced
in this patch:
|---------+------------------------------+---------------------------|
| | Without CR 0/1 Optimizations | With CR 0/1 Optimizations |
|---------+------------------------------+---------------------------|
| 1st run | 5m1.871s | 2m47.642s |
| 2nd run | 2m28.390s | 0m0.611s |
| 3rd run | 2m26.530s | 0m1.255s |
|---------+------------------------------+---------------------------|
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A few arrays in mballoc.c use the total number of valid orders as
their size. Currently, this value is set as "sb->s_blocksize_bits +
2". This makes code harder to read. So, instead add a new macro
MB_NUM_ORDERS(sb) to make the code more readable.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
s_mb_buddies_generated gets used later in this patch series to
determine if the cr 0 and cr 1 optimziations should be performed or
not. Currently, s_mb_buddies_generated is protected under a
spin_lock. In the allocation path, it is better if we don't depend on
the lock and instead read the value atomically. In order to do that,
we drop s_bal_lock altogether and we convert the only two protected
fields by it s_mb_buddies_generated and s_mb_generation_time to atomic
type.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
syzbot found UBSAN: shift-out-of-bounds in ext4_mb_init [1], when
1 << sbi->s_es->s_log_groups_per_flex is bigger than UINT_MAX,
where sbi->s_mb_prefetch is unsigned integer type.
32 is the maximum allowed power of s_log_groups_per_flex. Following if
check will also trigger UBSAN shift-out-of-bound:
if (1 << sbi->s_es->s_log_groups_per_flex >= UINT_MAX) {
So I'm checking it against the raw number, perhaps there is another way
to calculate UINT_MAX max power. Also use min_t as to make sure it's
uint type.
[1] UBSAN: shift-out-of-bounds in fs/ext4/mballoc.c:2713:24
shift exponent 60 is too large for 32-bit type 'int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x137/0x1be lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
ext4_mb_init_backend fs/ext4/mballoc.c:2713 [inline]
ext4_mb_init+0x19bc/0x19f0 fs/ext4/mballoc.c:2898
ext4_fill_super+0xc2ec/0xfbe0 fs/ext4/super.c:4983
Reported-by: syzbot+a8b4b0c60155e87e9484@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210224095800.3350002-1-snovitoll@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit cfd7323772 ("ext4: add prefetching for block allocation
bitmaps") introduced block bitmap prefetch, and expects to read block
bitmaps of flex_bg through an IO. However, it seems to ignore the
value range of s_log_groups_per_flex. In the scenario where the value
of s_log_groups_per_flex is greater than 27, s_mb_prefetch or
s_mb_prefetch_limit will overflow, cause a divide zero exception.
In addition, the logic of calculating nr is also flawed, because the
size of flexbg is fixed during a single mount, but s_mb_prefetch can
be modified, which causes nr to fail to meet the value condition of
[1, flexbg_size].
To solve this problem, we need to set the upper limit of
s_mb_prefetch. Since we expect to load block bitmaps of a flex_bg
through an IO, we can consider determining a reasonable upper limit
among the IO limit parameters. After consideration, we chose
BLK_MAX_SEGMENT_SIZE. This is a good choice to solve divide zero
problem and avoiding performance degradation.
[ Some minor code simplifications to make the changes easy to follow -- TYT ]
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Samuel Liao <samuelliao@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1607051143-24508-1-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When freeing metadata, we will create an ext4_free_data and
insert it into the pending free list. After the current
transaction is committed, the object will be freed.
ext4_mb_free_metadata() will check whether the area to be freed
overlaps with the pending free list. If true, return directly. At this
time, ext4_free_data is leaked. Fortunately, the probability of this
problem is small, since it only occurs if the file system is corrupted
such that a block is claimed by more one inode and those inodes are
deleted within a single jbd2 transaction.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/1604764698-4269-8-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The code of mb_find_order_for_block is a bit obscure, but we can
simplify it with mb_find_buddy(), make the code more concise.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-3-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After this patch (163a203), if an abnormal bitmap is detected, we
will mark the group as corrupt, and we will not use this group in
the future. Therefore, it should be meaningless to regenerate the
buddy bitmap of this group, It might be better to delete it.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604764698-4269-2-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit file system states are recorded in
sbi->s_mount_flags. Fast commit expects these bit manipulations to be
atomic. This patch adds helpers to make those modifications atomic.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-21-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Smatch complains that "i" can be uninitialized if we don't enter the
loop. I don't know if it's possible but we may as well silence this
warning.
[ Initialize i to sb->s_blocksize instead of 0. The only way the for
loop could be skipped entirely is the in-memory data structures, in
particular the bh->b_data for the on-disk superblock has gotten
corrupted enough that calculated value of group is >= to
ext4_get_groups_count(sb). In that case, we want to exit
immediately without allocating a block. -- TYT ]
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201030114620.GB3251003@mwanda
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Delete repeated words in fs/ext4/.
{the, this, of, we, after}
Also change spelling of "xttr" in inline.c to "xattr" in 2 places.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200805024850.12129-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_discard_group_preallocations() can be releasing group lock with
preallocations accumulated on its local list. Thus although
discard_pa_seq was incremented and concurrent allocating processes will
be retrying allocations, it can happen that premature ENOSPC error is
returned because blocks used for preallocations are not available for
reuse yet. Make sure we always free locally accumulated preallocations
before releasing group lock.
Fixes: 07b5b8e1ac ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924150959.4335-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As we test disk offline/online with running fsstress, we find fsstress
process is keeping running state.
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
....
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
ext4_mb_new_blocks
repeat:
ext4_mb_discard_preallocations_should_retry(sb, ac, &seq)
freed = ext4_mb_discard_preallocations
ext4_mb_discard_group_preallocations
this_cpu_inc(discard_pa_seq);
---> freed == 0
seq_retry = ext4_get_discard_pa_seq_sum
for_each_possible_cpu(__cpu)
__seq += per_cpu(discard_pa_seq, __cpu);
if (seq_retry != *seq) {
*seq = seq_retry;
ret = true;
}
As we see seq_retry is sum of discard_pa_seq every cpu, if
ext4_mb_discard_group_preallocations return zero discard_pa_seq in this
cpu maybe increase one, so condition "seq_retry != *seq" have always
been met.
Ritesh Harjani suggest to in ext4_mb_discard_group_preallocations function we
only increase discard_pa_seq when there is some PA to free.
Fixes: 07b5b8e1ac ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200916113859.1556397-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.
After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:
Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s
Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reorganize the if statement of ext4_mb_release_context(), make it
easier to read.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/5439ac6f-db79-ad68-76c1-a4dda9aa0cc3@gmail.com
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lost chunks are when some other process raced with the current thread
to grab a particular block allocation. Add mb_debug log for
developers who wants to see how often this is happening for a
particular workload.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/0a165ac0-1912-aebd-8a0d-b42e7cd1aea1@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
seq_puts is a lot cheaper than seq_printf, so use that to print
literal strings.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200810022158.9167-1-vulab@iscas.ac.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It might be better to adjust the code in two places:
1. Determine whether grp is currupt or not should be placed first.
2. (cr<=2 && free <ac->ac_g_ex.fe_len)should may belong to the crx
strategy, and it may be more appropriate to put it in the
subsequent switch statement block. For cr1, cr2, the conditions
in switch potentially realize the above judgment. For cr0, we
should add (free <ac->ac_g_ex.fe_len) judgment, and then delete
(free / fragments) >= ac->ac_g_ex.fe_len), because cr0 returns
true by default.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/e20b2d8f-1154-adb7-3831-a9e11ba842e9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These comments do not seem to be related to ext4_mb_check_limits(),
it may be invalid.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c49faf0c-d5d5-9c51-6911-9e0ff57c6bfa@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, system zones just track ranges of block, that are "important"
fs metadata (bitmaps, group descriptors, journal blocks, etc.). This
however complicates how extent tree (or indirect blocks) can be checked
for inodes that actually track such metadata - currently the journal
inode but arguably we should be treating quota files or resize inode
similarly. We cannot run __ext4_ext_check() on such metadata inodes when
loading their extents as that would immediately trigger the validity
checks and so we just hack around that and special-case the journal
inode. This however leads to a situation that a journal inode which has
extent tree of depth at least one can have invalid extent tree that gets
unnoticed until ext4_cache_extents() crashes.
To overcome this limitation, track inode number each system zone belongs
to (0 is used for zones not belonging to any inode). We can then verify
inode number matches the expected one when verifying extent tree and
thus avoid the false errors. With this there's no need to to
special-case journal inode during extent tree checking anymore so remove
it.
Fixes: 0a944e8a6c ("ext4: don't perform block validity checks on the journal inode")
Reported-by: Wolfgang Frisch <wolfgang.frisch@suse.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For file systems where we can afford to keep the buddy bitmaps cached,
we can speed up initial writes to large file systems by starting to
load the block allocation bitmaps as soon as the file system is
mounted. This won't work well for _super_ large file systems, or
memory constrained systems, so we only enable this when it is
requested via a mount option.
Addresses-Google-Bug: 159488342
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
cr=0 is supposed to be an optimization to save CPU cycles, but if
buddy data (in memory) is not initialized then all this makes no sense
as we have to do sync IO taking a lot of cycles. Also, at cr=0
mballoc doesn't choose any available chunk. cr=1 also skips groups
using heuristic based on avg. fragment size. It's more useful to skip
such groups and switch to cr=2 where groups will be scanned for
available chunks. However, we always read the first block group in a
flex_bg so metadata blocks will get read into the first flex_bg if
possible.
Using sparse image and dm-slow virtual device of 120TB was
simulated, then the image was formatted and filled using debugfs to
mark ~85% of available space as busy. mount process w/o the patch
couldn't complete in half an hour (according to vmstat it would take
~10-11 hours). With the patch applied mount took ~20 seconds.
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-12988
Signed-off-by: Alex Zhuravlev <azhuravlev@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Artem Blagodarenko <artem.blagodarenko@gmail.com>
This should significantly improve bitmap loading, especially for flex
groups as it tries to load all bitmaps within a flex.group instead of
one by one synchronously.
Prefetching is done in 8 * flex_bg groups, so it should be 8
read-ahead reads for a single allocating thread. At the end of
allocation the thread waits for read-ahead completion and initializes
buddy information so that read-aheads are not lost in case of memory
pressure.
At cr=0 the number of prefetching IOs is limited per allocation
context to prevent a situation when mballoc loads thousands of bitmaps
looking for a perfect group and ignoring groups with good chunks.
Together with the patch "ext4: limit scanning of uninitialized groups"
the mount time (which includes few tiny allocations) of a 1PB
filesystem is reduced significantly:
0% full 50%-full unpatched patched
mount time 33s 9279s 563s
[ Restructured by tytso; removed the state flags in the allocation
context, so it can be used to lazily prefetch the allocation bitmaps
immediately after the file system is mounted. Skip prefetching
block groups which are uninitialized. Finally pass in the
REQ_RAHEAD flag to the block layer while prefetching. ]
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently while doing block allocation grp->bb_free may be getting
modified if discard is happening in parallel.
For e.g. consider a case where there are lot of threads who have
preallocated lot of blocks and there is a thread which is trying
to discard all of this group's PA. Now it could happen that
we see all of those group's bb_free is zero and fail the allocation
while there is sufficient space if we free up all the PA.
So this patch adds another flag "EXT4_MB_STRICT_CHECK" which will be set
if we are unable to allocate any blocks in the first try (since we may
not have considered blocks about to be discarded from PA lists).
So during retry attempt to allocate blocks we will use ext4_lock_group()
for checking if the group is good or not.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/9cb740a117c958c36596f167b12af1beae9a68b7.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_good_group() definition was changed some time back
and now it even initializes the buddy cache (via ext4_mb_init_group()),
if in case the EXT4_MB_GRP_NEED_INIT() is true for a group.
Note that ext4_mb_init_group() could sleep and so should not be called
under a spinlock held.
This is fine as of now because ext4_mb_good_group() is called before
loading the buddy bitmap without ext4_lock_group() held
and again called after loading the bitmap, only this time with
ext4_lock_group() held.
But still this whole thing is confusing.
So this patch refactors out ext4_mb_good_group_nolock() which should be
called when without holding ext4_lock_group().
Also in further patches we hold the spinlock (ext4_lock_group()) while
doing any calculations which involves grp->bb_free or grp->bb_fragments.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/d9f7d031a5fbe1c943fae6bf1ff5cdf0604ae722.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There could be a race in function ext4_mb_discard_group_preallocations()
where the 1st thread may iterate through group's bb_prealloc_list and
remove all the PAs and add to function's local list head.
Now if the 2nd thread comes in to discard the group preallocations,
it will see that the group->bb_prealloc_list is empty and will return 0.
Consider for a case where we have less number of groups
(for e.g. just group 0),
this may even return an -ENOSPC error from ext4_mb_new_blocks()
(where we call for ext4_mb_discard_group_preallocations()).
But that is wrong, since 2nd thread should have waited for 1st thread
to release all the PAs and should have retried for allocation.
Since 1st thread was anyway going to discard the PAs.
The algorithm using this percpu seq counter goes below:
1. We sample the percpu discard_pa_seq counter before trying for block
allocation in ext4_mb_new_blocks().
2. We increment this percpu discard_pa_seq counter when we either allocate
or free these blocks i.e. while marking those blocks as used/free in
mb_mark_used()/mb_free_blocks().
3. We also increment this percpu seq counter when we successfully identify
that the bb_prealloc_list is not empty and hence proceed for discarding
of those PAs inside ext4_mb_discard_group_preallocations().
Now to make sure that the regular fast path of block allocation is not
affected, as a small optimization we only sample the percpu seq counter
on that cpu. Only when the block allocation fails and when freed blocks
found were 0, that is when we sample percpu seq counter for all cpus using
below function ext4_get_discard_pa_seq_sum(). This happens after making
sure that all the PAs on grp->bb_prealloc_list got freed or if it's empty.
It can be well argued that why don't just check for grp->bb_free to
see if there are any free blocks to be allocated. So here are the two
concerns which were discussed:-
1. If for some reason the blocks available in the group are not
appropriate for allocation logic (say for e.g.
EXT4_MB_HINT_GOAL_ONLY, although this is not yet implemented), then
the retry logic may result into infinte looping since grp->bb_free is
non-zero.
2. Also before preallocation was clubbed with block allocation with the
same ext4_lock_group() held, there were lot of races where grp->bb_free
could not be reliably relied upon.
Due to above, this patch considers discard_pa_seq logic to determine if
we should retry for block allocation. Say if there are are n threads
trying for block allocation and none of those could allocate or discard
any of the blocks, then all of those n threads will fail the block
allocation and return -ENOSPC error. (Since the seq counter for all of
those will match as no block allocation/discard was done during that
duration).
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/7f254686903b87c419d798742fd9a1be34f0657b.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Implement ext4_mb_discard_preallocations_should_retry()
which we will need in later patches to add more logic
like check for sequence number match to see if we should
retry for block allocation or not.
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/1cfae0098d2aa9afbeb59331401258182868c8f2.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_discard_preallocations() only checks for grp->bb_prealloc_list
of every group to discard the group's PA to free up the space if
allocation request fails. Consider below race:-
Process A Process B
1. allocate blocks
1. Fails block allocation from
ext4_mb_regular_allocator()
ext4_lock_group()
allocated blocks
more than ac_o_ex.fe_len
ext4_unlock_group()
2. Scans the
grp->bb_prealloc_list (under
ext4_lock_group()) and
find nothing and thus return
-ENOSPC.
2. Add the additional blocks to PA list
ext4_lock_group()
add blocks to grp->bb_prealloc_list
ext4_unlock_group()
Above race could be avoided if we add those additional blocks to
grp->bb_prealloc_list at the same time with block allocation when
ext4_lock_group() was still held.
With this discard-PA will know if there are actually any blocks which
could be freed from the PA
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/a2217dd782585b42328981832e6d396abaaccb80.1589955723.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mb_debug() msg had only 1 control level for all type of msgs.
And if we enable mballoc_debug then all of those msgs would be enabled.
Instead of adding multiple debug levels for mb_debug() msgs, use
pr_debug() with which we could have finer control to print msgs at all
of different levels (i.e. at file, func, line no.).
Also add process name/pid, superblk id, and other info in mb_debug()
msg. This also kills the mballoc_debug module parameter, since it is
not needed any more.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/f0c660cbde9e2edbe95c67942ca9ad80dd2231eb.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make sure to check for e4b->bd_info->bb_bitmap == NULL, in
mb_cmp_bitmaps() and return if NULL, to avoid possible NULL ptr
dereference. Similar to how we do this in other ifdef DOUBLE_CHECK
functions.
Also remove the BUG_ON() logic if kmalloc() or ext4_read_block_bitmap()
fails. We should simply mark grp->bb_bitmap as NULL if above happens.
In fact ext4_read_block_bitmap() may even return an error in case of resize
ioctl. Hence remove this BUG_ON logic (fstests ext4/032 may trigger
this).
Link: https://lore.kernel.org/r/9a54f8a696ff17c057cd571be3d15ac3ec1407f1.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch implemets mb_group_bb_bitmap_alloc() and
mb_group_bb_bitmap_free() function to remove #ifdef DOUBLE_CHECK macro
and it's related code from inside
ext4_mb_add_groupinfo()/ext4_mb_release().
There should be no functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8c2095d74b779f0254a19b24982490dc6f07c4f9.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds some more debugging mb_debug() msgs to help improve
mballoc code debugging.
Other than adding more mb_debug() msgs at few more places,
there should be no other functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/5fc8e7788b924e211fcfa4a4c1d2f8503511661a.1589086800.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover. In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.
Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using a separate function, ext4_set_errno() to set the errno is
problematic because it doesn't do the right thing once
s_last_error_errorcode is non-zero. It's also less racy to set all of
the error information all at once. (Also, as a bonus, it shrinks code
size slightly.)
Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu
Fixes: 878520ac45 ("ext4: save the error code which triggered...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
list_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200213152558.7070-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During an online resize an array of s_flex_groups structures gets replaced
so it can get enlarged. If there is a concurrent access to the array and
this memory has been reused then this can lead to an invalid memory access.
The s_flex_group array has been converted into an array of pointers rather
than an array of structures. This is to ensure that the information
contained in the structures cannot get out of sync during a resize due to
an accessor updating the value in the old structure after it has been
copied but before the array pointer is updated. Since the structures them-
selves are no longer copied but only the pointers to them this case is
mitigated.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
During an online resize an array of pointers to s_group_info gets replaced
so it can get enlarged. If there is a concurrent access to the array in
ext4_get_group_info() and this memory has been reused then this can lead to
an invalid memory access.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-3-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Balbir Singh <sblbir@amazon.com>
Cc: stable@kernel.org
This allows the cause of an ext4_error() report to be categorized
based on whether it was triggered due to an I/O error, or an memory
allocation error, or other possible causes. Most errors are caused by
a detected file system inconsistency, so the default code stored in
the superblock will be EXT4_ERR_EFSCORRUPTED.
Link: https://lore.kernel.org/r/20191204032335.7683-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The sanity check in mb_find_extent() only checked that returned extent
does not extend past blocksize * 8, however it should not extend past
EXT4_CLUSTERS_PER_GROUP(sb). This can happen when clusters_per_group <
blocksize * 8 and the tail of the bitmap is not properly filled by 1s
which happened e.g. when ancient kernels have grown the filesystem.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
There is a function which clearly conveys the objective of checking
i_writecount. Additionally the usage in ext4_mb_initialize_context was
wrong, since a node would have wrongfully been reported as writable if
i_writecount had a negative value (MMAP_DENY_WRITE).
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Modify ext4_ext_remove_space() and the code it calls to correct the
reserved cluster count for pending reservations (delayed allocated
clusters shared with allocated blocks) when a block range is removed
from the extent tree. Pending reservations may be found for the clusters
at the ends of written or unwritten extents when a block range is removed.
If a physical cluster at the end of an extent is freed, it's necessary
to increment the reserved cluster count to maintain correct accounting
if the corresponding logical cluster is shared with at least one
delayed and unwritten extent as found in the extents status tree.
Add a new function, ext4_rereserve_cluster(), to reapply a reservation
on a delayed allocated cluster sharing blocks with a freed allocated
cluster. To avoid ENOSPC on reservation, a flag is applied to
ext4_free_blocks() to briefly defer updating the freeclusters counter
when an allocated cluster is freed. This prevents another thread
from allocating the freed block before the reservation can be reapplied.
Redefine the partial cluster object as a struct to carry more state
information and to clarify the code using it.
Adjust the conditional code structure in ext4_ext_remove_space to
reduce the indentation level in the main body of the code to improve
readability.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The err is not used after initalization. So just remove the variable.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
'ac->ac_g_ex.fe_len' is a user-controlled value which is used in the
derivation of 'ac->ac_2order'. 'ac->ac_2order', in turn, is used to
index arrays which makes it a potential spectre gadget. Fix this by
sanitizing the value assigned to 'ac->ac2_order'. This covers the
following accesses found with the help of smatch:
* fs/ext4/mballoc.c:1896 ext4_mb_simple_scan_group() warn: potential
spectre issue 'grp->bb_counters' [w] (local cap)
* fs/ext4/mballoc.c:445 mb_find_buddy() warn: potential spectre issue
'EXT4_SB(e4b->bd_sb)->s_mb_offsets' [r] (local cap)
* fs/ext4/mballoc.c:446 mb_find_buddy() warn: potential spectre issue
'EXT4_SB(e4b->bd_sb)->s_mb_maxs' [r] (local cap)
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
maliciously crafted file system image can result in a kernel OOPS or
hang. At least one fix addresses an inline data bug could be
triggered by userspace without the need of a crafted file system
(although it does require that the inline data feature be enabled).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAltBmcYACgkQ8vlZVpUN
gaPDJgf/cEa9QuiYTbNOmcOMorK9LEk5XO8qsiJdUVNQtLsHZfl0QowbkF9/F/W5
andTJzNpFvXeLADMTTjpsDnQ90i8LKD11Kol3dPJcMhJhELtQsjxUBguxpQBP86R
dvHuCl2/AaqX7rr6Co80yYSinRCquqkzJNhdM5/MLNGziSpkQL3dPSs93rmV+YbU
8DkUwmhDhoiToLBTLaldrAsAzKvor3uyjNPJ3qhxeE2kXrnuI1V4XfstBGjhVKFB
/5aYWexDZkL5qiCo+lZnqdITqUnPx3uAkUdBn0dj7V+nDow+/R/8nApvlvJu6usF
OfMoKr098/pmPAjE5aZ8QpBNVtLFpg==
=njzR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes for ext4; most of which relate to vulnerabilities where a
maliciously crafted file system image can result in a kernel OOPS or
hang.
At least one fix addresses an inline data bug could be triggered by
userspace without the need of a crafted file system (although it does
require that the inline data feature be enabled)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: check superblock mapped prior to committing
ext4: add more mount time checks of the superblock
ext4: add more inode number paranoia checks
ext4: avoid running out of journal credits when appending to an inline file
jbd2: don't mark block as modified if the handle is out of credits
ext4: never move the system.data xattr out of the inode body
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: only look at the bg_flags field if it is valid
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: always verify the magic number in xattr blocks
ext4: add corruption check in ext4_xattr_set_entry()
ext4: add warn_on_error mount option
The bg_flags field in the block group descripts is only valid if the
uninit_bg or metadata_csum feature is enabled. We were not
consistently looking at this field; fix this.
Also block group #0 must never have uninitialized allocation bitmaps,
or need to be zeroed, since that's where the root inode, and other
special inodes are set up. Check for these conditions and mark the
file system as corrupted if they are detected.
This addresses CVE-2018-10876.
https://bugzilla.kernel.org/show_bug.cgi?id=199403
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
file systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlsWmXcACgkQ8vlZVpUN
gaMGmAf+JGK4XysAvlJuj9tJfFPHHwgXSBBe/GAgyjhW9XhtNRHprUM2SpvwpIdI
Isl5O8Ec+FywBJB0I4AGy6yds6DE6jn38FFRFEhVmkp4EoROJiIr8+a7spfVuC3m
cWrHBgc7FwK4qYlyuGtH2+6NYva+KNFr+wwbvvUusvldyZAWMzflfrcdHM6D+/JE
+Sd5I7aniqnP5fICq0b4xrP2zWO4XJEKMbZO2dJ9yRtMmUnbaSj6G+bTGDRyfrNk
L3wJhqIu93o7zjDaEC0UfXSLAXzoDGWHeq7fBssaJiXj/hNtAvAGPaRMbgFR9a3h
uHmhvf84iyJuM+8GgG25UqeGwCuWiA==
=b0VQ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of cleanups and bug fixes, especially dealing with corrupted
file systems"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: fix fencepost error in check for inode count overflow during resize
ext4: correctly handle a zero-length xattr with a non-zero e_value_offs
ext4: bubble errors from ext4_find_inline_data_nolock() up to ext4_iget()
ext4: do not allow external inodes for inline data
ext4: report delalloc reserve as non-free in statfs for project quota
ext4: remove NULL check before calling kmem_cache_destroy()
jbd2: remove NULL check before calling kmem_cache_destroy()
jbd2: remove bunch of empty lines with jbd2 debug
ext4: handle errors on ext4_commit_super
ext4: do not update s_last_mounted of a frozen fs
ext4: factor out helper ext4_sample_last_mounted()
vfs: add the sb_start_intwrite_trylock() helper
ext4: update mtime in ext4_punch_hole even if no blocks are released
ext4: add verifier check for symlink with append/immutable flags
fs: ext4: add new return type vm_fault_t
ext4: fix hole length detection in ext4_ind_map_blocks()
ext4: mark block bitmap corrupted when found
ext4: mark inode bitmap corrupted when found
ext4: add new ext4_mark_group_bitmap_corrupted() helper
ext4: fix wrong return value in ext4_read_inode_bitmap()
...
Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls. Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are still some cases that we missed to set
block bitmaps corrupted bit properly:
1) block bitmap number is wrong.
2) failed to read block bitmap due to disk errors.
3) double free block bitmaps..
4) some mismatch check with bitmaps vs buddy information.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Since there are many places to set inode/block bitmap
corrupt bit, add a new helper for it, which will make
codes more clear.
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
We could use 'sbi' instead of 'EXT4_SB(sb)' to make code more elegant.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
A number of ext4 source files were skipped due because their copyright
permission statements didn't match the expected text used by the
automated conversion utilities. I've added SPDX tags for the rest.
While looking at some of these files, I've noticed that we have quite
a bit of variation on the licenses that were used --- in particular
some of the Red Hat licenses on the jbd2 files use a GPL2+ license,
and we have some files that have a LGPL-2.1 license (which was quite
surprising).
I've not attempted to do any license changes. Even if it is perfectly
legal to relicense to GPL 2.0-only for consistency's sake, that should
be done with ext4 developer community discussion.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds support for online resizing on bigalloc file system by
implementing EXT4_IOC_RESIZE_FS ioctl. Old resize interfaces (add
block groups and extend last block group) are left untouched. Tests
performed with cluster sizes of 1, 2, 4 and 8 blocks (of size 4k) per
cluster. I will add these tests to xfstests.
Signed-off-by: Harshad Shirwadkar <harshads@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Arnd Bergmann <arnd@arndb.de>
As Stefan pointed out, I misremembered what clang can do specifically,
and it turns out that the variable-length array at the end of the
structure did not work (a flexible array would have worked here
but not solved the problem):
fs/ext4/mballoc.c:2303:17: error: fields must have a constant size:
'variable length array in structure' extension will never be supported
ext4_grpblk_t counters[blocksize_bits + 2];
This reverts part of my previous patch, using a fixed-size array
again, but keeping the check for the array overflow.
Fixes: 2df2c3402f ("ext4: fix warning about stack corruption")
Reported-by: Stefan Agner <stefan@agner.ch>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 62d1034f53e3 ("fortify: use WARN instead of BUG for now"),
we get a warning about possible stack overflow from a memcpy that
was not strictly bounded to the size of the local variable:
inlined from 'ext4_mb_seq_groups_show' at fs/ext4/mballoc.c:2322:2:
include/linux/string.h:309:9: error: '__builtin_memcpy': writing between 161 and 1116 bytes into a region of size 160 overflows the destination [-Werror=stringop-overflow=]
We actually had a bug here that would have been found by the warning,
but it was already fixed last year in commit 30a9d7afe7 ("ext4: fix
stack memory corruption with 64k block size").
This replaces the fixed-length structure on the stack with a variable-length
structure, using the correct upper bound that tells the compiler that
everything is really fine here. I also change the loop count to check
for the same upper bound for consistency, but the existing code is
already correct here.
Note that while clang won't allow certain kinds of variable-length arrays
in structures, this particular instance is fine, as the array is at the
end of the structure, and the size is strictly bounded.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've changed the discard command handling into parallel manner.
But, in this change, I forgot decreasing the usage count of the bio
which was used to send discard request. I'm sorry about that.
Fixes: a015434480 ("ext4: send parallel discards on commit completions")
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Trivial fix to spelling mistake in mb_debug debug message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now, when we mount ext4 filesystem with '-o discard' option, we have to
issue all the discard commands for the blocks to be deallocated and
wait for the completion of the commands on the commit complete phase.
Because this procedure might involve a lot of sequential combinations of
issuing discard commands and waiting for that, the delay of this
procedure might be too much long, even to 17.0s in our test,
and it results in long commit delay and fsync() performance degradation.
To reduce this kind of delay, instead of adding callback for each
extent and handling all of them in a sequential manner on commit phase,
we instead add a separate list of extents to free to the superblock and
then process this list at once after transaction commits so that
we can issue all the discard commands in a parallel manner like XFS
filesystem.
Finally, we could enhance the discard command handling performance.
The result was such that 17.0s delay of a single commit in the worst
case has been enhanced to 4.8s.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Tested-by: Kitae Lee <kitae87.lee@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
IS_NOQUOTA() indicates whether quota is disabled for an inode. Ext4
also uses it to check whether an inode is for a quota file. The
distinction currently doesn't matter because quota is disabled only
for the quota files. When we start disabling quota for other inodes
in the future, we will want to make the distinction clear.
Replace IS_NOQUOTA() call with ext4_is_quota_file() at places where
we are checking for quota files.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I've got another report about breaking ext4 by ENOMEM error returned from
ext4_mb_load_buddy() caused by memory shortage in memory cgroup.
This time inside ext4_discard_preallocations().
This patch replaces ext4_error() with ext4_warning() where errors returned
from ext4_mb_load_buddy() are not fatal and handled by caller:
* ext4_mb_discard_group_preallocations() - called before generating ENOSPC,
we'll try to discard other group or return ENOSPC into user-space.
* ext4_trim_all_free() - just stop trimming and return ENOMEM from ioctl.
Some callers cannot handle errors, thus __GFP_NOFAIL is used for them:
* ext4_discard_preallocations()
* ext4_mb_discard_lg_preallocations()
Fixes: adb7ef600c ("ext4: use __GFP_NOFAIL in ext4_free_blocks()")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
Patch series "kvmalloc", v5.
There are many open coded kmalloc with vmalloc fallback instances in the
tree. Most of them are not careful enough or simply do not care about
the underlying semantic of the kmalloc/page allocator which means that
a) some vmalloc fallbacks are basically unreachable because the kmalloc
part will keep retrying until it succeeds b) the page allocator can
invoke a really disruptive steps like the OOM killer to move forward
which doesn't sound appropriate when we consider that the vmalloc
fallback is available.
As it can be seen implementing kvmalloc requires quite an intimate
knowledge if the page allocator and the memory reclaim internals which
strongly suggests that a helper should be implemented in the memory
subsystem proper.
Most callers, I could find, have been converted to use the helper
instead. This is patch 6. There are some more relying on __GFP_REPEAT
in the networking stack which I have converted as well and Eric Dumazet
was not opposed [2] to convert them as well.
[1] http://lkml.kernel.org/r/20170130094940.13546-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/1485273626.16328.301.camel@edumazet-glaptop3.roam.corp.google.com
This patch (of 9):
Using kmalloc with the vmalloc fallback for larger allocations is a
common pattern in the kernel code. Yet we do not have any common helper
for that and so users have invented their own helpers. Some of them are
really creative when doing so. Let's just add kv[mz]alloc and make sure
it is implemented properly. This implementation makes sure to not make
a large memory pressure for > PAGE_SZE requests (__GFP_NORETRY) and also
to not warn about allocation failures. This also rules out the OOM
killer as the vmalloc is a more approapriate fallback than a disruptive
user visible action.
This patch also changes some existing users and removes helpers which
are specific for them. In some cases this is not possible (e.g.
ext4_kvmalloc, libcfs_kvzalloc) because those seems to be broken and
require GFP_NO{FS,IO} context which is not vmalloc compatible in general
(note that the page table allocation is GFP_KERNEL). Those need to be
fixed separately.
While we are at it, document that __vmalloc{_node} about unsupported gfp
mask because there seems to be a lot of confusion out there.
kvmalloc_node will warn about GFP_KERNEL incompatible (which are not
superset) flags to catch new abusers. Existing ones would have to die
slowly.
[sfr@canb.auug.org.au: f2fs fixup]
Link: http://lkml.kernel.org/r/20170320163735.332e64b7@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170306103032.2540-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andreas Dilger <adilger@dilger.ca> [ext4 part]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support the GETFSMAP ioctls so that we can use the xfs free space
management tools to probe ext4 as well. Note that this is a partial
implementation -- we only report fixed-location metadata and free space;
everything else is reported as "unknown".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Constify static data in ext4 that is never (intentionally) modified so
that it is placed in .rodata and benefits from memory protection.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.
This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'
Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.
[geliangtang@gmail.com: truncate: use i_blocksize()]
Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a filesystem is created using:
mkfs.ext4 -b 4096 -E stride=512 <dev>
and we try to allocate 64MB extent, we will end up directly in
ext4_mb_complex_scan_group(). This is because the request is detected
as power-of-two allocation (so we start in ext4_mb_regular_allocator()
with ac_criteria == 0) however the check before
ext4_mb_simple_scan_group() refuses the direct buddy scan because the
allocation request is too large. Since cr == 0, the check whether we
should use ext4_mb_scan_aligned() fails as well and we fall back to
ext4_mb_complex_scan_group().
Fix the problem by checking for upper limit on power-of-two requests
directly when detecting them.
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If filesystem groups are artifically small (using parameter -g to
mkfs.ext4), ext4_mb_normalize_request() can result in a request that is
larger than a block group. Trim the request size to not confuse
allocation code.
Reported-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
The last BUG_ON in mb_find_extent() is apparently triggering in some
rare cases. Most of the time it indicates a bug in the buddy bitmap
algorithms, but there are some weird cases where it can trigger when
buddy bitmap is still in memory, but the block bitmap has to be read
from disk, and there is disk or memory corruption such that the block
bitmap and the buddy bitmap are out of sync.
Google-Bug-Id: #33702157
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The number of 'counters' elements needed in 'struct sg' is
super_block->s_blocksize_bits + 2. Presently we have 16 'counters'
elements in the array. This is insufficient for block sizes >= 32k. In
such cases the memcpy operation performed in ext4_mb_seq_groups_show()
would cause stack memory corruption.
Fixes: c9de560ded
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
'border' variable is set to a value of 2 times the block size of the
underlying filesystem. With 64k block size, the resulting value won't
fit into a 16-bit variable. Hence this commit changes the data type of
'border' to 'unsigned int'.
Fixes: c9de560ded
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Pull vfs updates from Al Viro:
"Assorted cleanups and fixes.
Probably the most interesting part long-term is ->d_init() - that will
have a bunch of followups in (at least) ceph and lustre, but we'll
need to sort the barrier-related rules before it can get used for
really non-trivial stuff.
Another fun thing is the merge of ->d_iput() callers (dentry_iput()
and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all
except the one in __d_lookup_lru())"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
fs/dcache.c: avoid soft-lockup in dput()
vfs: new d_init method
vfs: Update lookup_dcache() comment
bdev: get rid of ->bd_inodes
Remove last traces of ->sync_page
new helper: d_same_name()
dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
vfs: clean up documentation
vfs: document ->d_real()
vfs: merge .d_select_inode() into .d_real()
unify dentry_iput() and dentry_unlink_inode()
binfmt_misc: ->s_root is not going anywhere
drop redundant ->owner initializations
ufs: get rid of redundant checks
orangefs: constify inode_operations
missed comment updates from ->direct_IO() prototype change
file_inode(f)->i_mapping is f->f_mapping
trim fsnotify hooks a bit
9p: new helper - v9fs_parent_fid()
debugfs: ->d_parent is never NULL or negative
...
If we hit this error when mounted with errors=continue or
errors=remount-ro:
EXT4-fs error (device loop0): ext4_mb_mark_diskspace_used:2940: comm ext4.exe: Allocating blocks 5090-6081 which overlap fs metadata
then ext4_mb_new_blocks() will call ext4_mb_release_context() and try to
continue. However, ext4_mb_release_context() is the wrong thing to call
here since we are still actually using the allocation context.
Instead, just error out. We could retry the allocation, but there is a
possibility of getting stuck in an infinite loop instead, so this seems
safer.
[ Fixed up so we don't return EAGAIN to userspace. --tytso ]
Fixes: 8556e8f3b6 ("ext4: Don't allow new groups to be added during block allocation")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
If there are no pending blocks to be released after a commit, forcing
a journal commit has no hope of helping. It's possible that a commit
had just completed, so if there are now free blocks available for
allocation, it's worth retrying the commit.
Reported-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
it's not needed for file_operations of inodes located on fs defined
in the hosting module and for file_operations that go into procfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently, in ext4_mb_init(), there's a loop like the following:
do {
...
offset += 1 << (sb->s_blocksize_bits - i);
i++;
} while (i <= sb->s_blocksize_bits + 1);
Note that the updated offset is used in the loop's next iteration only.
However, at the last iteration, that is at i == sb->s_blocksize_bits + 1,
the shift count becomes equal to (unsigned)-1 > 31 (c.f. C99 6.5.7(3))
and UBSAN reports
UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2621:15
shift exponent 4294967295 is too large for 32-bit type 'int'
[...]
Call Trace:
[<ffffffff818c4d25>] dump_stack+0xbc/0x117
[<ffffffff818c4c69>] ? _atomic_dec_and_lock+0x169/0x169
[<ffffffff819411ab>] ubsan_epilogue+0xd/0x4e
[<ffffffff81941cac>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
[<ffffffff81941ab1>] ? __ubsan_handle_load_invalid_value+0x158/0x158
[<ffffffff814b6dc1>] ? kmem_cache_alloc+0x101/0x390
[<ffffffff816fc13b>] ? ext4_mb_init+0x13b/0xfd0
[<ffffffff814293c7>] ? create_cache+0x57/0x1f0
[<ffffffff8142948a>] ? create_cache+0x11a/0x1f0
[<ffffffff821c2168>] ? mutex_lock+0x38/0x60
[<ffffffff821c23ab>] ? mutex_unlock+0x1b/0x50
[<ffffffff814c26ab>] ? put_online_mems+0x5b/0xc0
[<ffffffff81429677>] ? kmem_cache_create+0x117/0x2c0
[<ffffffff816fcc49>] ext4_mb_init+0xc49/0xfd0
[...]
Observe that the mentioned shift exponent, 4294967295, equals (unsigned)-1.
Unless compilers start to do some fancy transformations (which at least
GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the
such calculated value of offset is never used again.
Silence UBSAN by introducing another variable, offset_incr, holding the
next increment to apply to offset and adjust that one by right shifting it
by one position per loop iteration.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161
Cc: stable@vger.kernel.org
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, in mb_find_order_for_block(), there's a loop like the following:
while (order <= e4b->bd_blkbits + 1) {
...
bb += 1 << (e4b->bd_blkbits - order);
}
Note that the updated bb is used in the loop's next iteration only.
However, at the last iteration, that is at order == e4b->bd_blkbits + 1,
the shift count becomes negative (c.f. C99 6.5.7(3)) and UBSAN reports
UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1281:11
shift exponent -1 is negative
[...]
Call Trace:
[<ffffffff818c4d35>] dump_stack+0xbc/0x117
[<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
[<ffffffff819411bb>] ubsan_epilogue+0xd/0x4e
[<ffffffff81941cbc>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
[<ffffffff81941ac1>] ? __ubsan_handle_load_invalid_value+0x158/0x158
[<ffffffff816e93a0>] ? ext4_mb_generate_from_pa+0x590/0x590
[<ffffffff816502c8>] ? ext4_read_block_bitmap_nowait+0x598/0xe80
[<ffffffff816e7b7e>] mb_find_order_for_block+0x1ce/0x240
[...]
Unless compilers start to do some fancy transformations (which at least
GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the
such calculated value of bb is never used again.
Silence UBSAN by introducing another variable, bb_incr, holding the next
increment to apply to bb and adjust that one by right shifting it by one
position per loop iteration.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161
Cc: stable@vger.kernel.org
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Messages passed to ext4_warning() or ext4_error() don't need trailing
newlines, because these function add the newlines themselves.
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This might be unexpected but pages allocated for sbi->s_buddy_cache are
charged to current memory cgroup. So, GFP_NOFS allocation could fail if
current task has been killed by OOM or if current memory cgroup has no
free memory left. Block allocator cannot handle such failures here yet.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now, ext4_free_blocks() doesn't revoke data blocks of per-file data
journalled inode and it can cause file data inconsistency problems.
Even though data blocks of per-file data journalled inode are already
forgotten by jbd2_journal_invalidatepage() in advance of invoking
ext4_free_blocks(), we still need to revoke the data blocks here.
Moreover some of the metadata blocks, which are not found by
sb_find_get_block(), are still needed to be revoked, but this is also
missing here.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This patch adds a line break for proc mb_groups display.
Signed-off-by: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Switch everything to the new and more capable implementation of abs().
Mainly to give the new abs() a bit of a workout.
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ext4_fsblk_t type is a long long, which should not be used
with abs(), as is done in ext4_mb_check_group_pa().
This patch modifies ext4_mb_check_group_pa() to use abs64()
instead.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When you repeatly execute xfstest generic/269 with bigalloc_1k option
enabled using the below command:
"./kvm-xfstests -c bigalloc_1k -m nodelalloc -C 1000 generic/269"
you can easily see the below bug message.
"JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh);"
This means that an already revoked buffer is erroneously revoked again
and it is caused by doing revoke for the buffer at the wrong position
in ext4_free_blocks(). We need to re-position the buffer revoke
procedure for an unspecified buffer after checking the cluster boundary
for bigalloc option. If not, some part of the cluster can be doubly
revoked.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Make the bitmap reaading routines return real error codes (EIO,
EFSCORRUPTED, EFSBADCRC) which can then be reflected back to
userspace for more precise diagnosis work.
In particular, this means that mballoc no longer claims that we're out
of memory if the block bitmaps become corrupt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This allows us to refactor the procfs code, which saves a bit of
compiled space. More importantly it isolates most of the procfs
support code into a single file, so it's easier to #ifdef it out if
the proc file system has been disabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* address corner cases for indirect blocks->extent migration
* fix reserved block accounting invalidate_page when
page_size != block_size (i.e., ppc or 1k block size file systems)
* fix deadlocks when a memcg is under heavy memory pressure
* fix fencepost error in lazytime optimization
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVmW27AAoJEPL5WVaVDYGjmEkIAJsGHVIKur1Kp//FhejSB/wI
B0d+UuQt5kdAE3lNxC7lHO1NqIhvnS7eBho+52LG8V4JDRrzTbE1GdbsBhAIk6FW
CcsQvsHAI99QJMdqOCachu/+nhCwIINGkxmbumhNaZoJPn6wmGQzCA3Cn5qmnGnK
Ctbk6li1HuMXyzbbvxCLfaD/xCUs1NCdufEnRU44i0U4OfaYNpiAhddeGIQ8WMEQ
G14l2JvhIfye6fG8lnCzfacFvnT9zvvSGfRO3ZQjC4Az1EogIUbhCPLvq0ebDbPp
i4eRfrSRdXmMojqmW/knET8skXQVZVnD7LWuvkue+n47UbTH2c0roTbp4l76W+U=
=x8Cc
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes (all for stable kernels) for ext4:
- address corner cases for indirect blocks->extent migration
- fix reserved block accounting invalidate_page when
page_size != block_size (i.e., ppc or 1k block size file systems)
- fix deadlocks when a memcg is under heavy memory pressure
- fix fencepost error in lazytime optimization"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: replace open coded nofail allocation in ext4_free_blocks()
ext4: correctly migrate a file with a hole at the beginning
ext4: be more strict when migrating to non-extent based file
ext4: fix reservation release on invalidatepage for delalloc fs
ext4: avoid deadlocks in the writeback path by using sb_getblk_gfp
bufferhead: Add _gfp version for sb_getblk()
ext4: fix fencepost error in lazytime optimization
ext4_free_blocks is looping around the allocation request and mimics
__GFP_NOFAIL behavior without any allocation fallback strategy. Let's
remove the open coded loop and replace it with __GFP_NOFAIL. Without the
flag the allocator has no way to find out never-fail requirement and
cannot help in any way.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
Making a function call with 20 arguments is rather expensive in both
stack and .text. In this case, doing the formatting manually doesn't
make it any less readable, so we might as well save 155 bytes of .text
and 112 bytes of stack.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Currently ext4_mb_good_group() only returns 0 or 1 depending on whether
the allocation group is suitable for use or not. However we might get
various errors and fail while initializing new group including -EIO
which would never get propagated up the call chain. This might lead to
an endless loop at writeback when we're trying to find a good group to
allocate from and we fail to initialize new group (read error for
example).
Fix this by returning proper error code from ext4_mb_good_group() and
using it in ext4_mb_regular_allocator(). In ext4_mb_regular_allocator()
we will always return only the first occurred error from
ext4_mb_good_group() and we only propagate it back to the caller if we
do not get any other errors and we fail to allocate any blocks.
Note that with other modes than errors=continue, we will fail
immediately in ext4_mb_good_group() in case of error, however with
errors=continue we should try to continue using the file system, that's
why we're not going to fail immediately when we see an error from
ext4_mb_good_group(), but rather when we fail to find a suitable block
group to allocate from due to an problem in group initialization.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently on the machines with page size > block size when initializing
block group buddy cache we initialize it for all the block group bitmaps
in the page. However in the case of read error, checksum error, or if
a single bitmap is in any way corrupted we would fail to initialize all
of the bitmaps. This is problematic because we will not have access to
the other allocation groups even though those might be perfectly fine
and usable.
Fix this by reading all the bitmaps instead of error out on the first
problem and simply skip the bitmaps which were either not read properly,
or are not valid.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.
This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it. c files
which need access to more backing-dev details now include
backing-dev.h directly. This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.
v2: fs/fat build failure fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
The iput() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We must use GFP_NOFS instead GFP_KERNEL inside ext4_mb_add_groupinfo
and ext4_calculate_overhead() because they are called from inside a
journal transaction. Call trace:
ioctl
->ext4_group_add
->journal_start
->ext4_setup_new_descs
->ext4_mb_add_groupinfo -> GFP_KERNEL
->ext4_flex_group_add
->ext4_update_super
->ext4_calculate_overhead -> GFP_KERNEL
->journal_stop
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
optimizations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vWic
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A large number of cleanups and bug fixes, with some (minor) journal
optimizations"
[ This got sent to me before -rc1, but was stuck in my spam folder. - Linus ]
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (67 commits)
ext4: check s_chksum_driver when looking for bg csum presence
ext4: move error report out of atomic context in ext4_init_block_bitmap()
ext4: Replace open coded mdata csum feature to helper function
ext4: delete useless comments about ext4_move_extents
ext4: fix reservation overflow in ext4_da_write_begin
ext4: add ext4_iget_normal() which is to be used for dir tree lookups
ext4: don't orphan or truncate the boot loader inode
ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT
ext4: optimize block allocation on grow indepth
ext4: get rid of code duplication
ext4: fix over-defensive complaint after journal abort
ext4: fix return value of ext4_do_update_inode
ext4: fix mmap data corruption when blocksize < pagesize
vfs: fix data corruption when blocksize < pagesize for mmaped data
ext4: fold ext4_nojournal_sops into ext4_sops
ext4: support freezing ext2 (nojournal) file systems
ext4: fold ext4_sync_fs_nojournal() into ext4_sync_fs()
ext4: don't check quota format when there are no quota files
jbd2: simplify calling convention around __jbd2_journal_clean_checkpoint_list
jbd2: avoid pointless scanning of checkpoint lists
...
Pull percpu consistent-ops changes from Tejun Heo:
"Way back, before the current percpu allocator was implemented, static
and dynamic percpu memory areas were allocated and handled separately
and had their own accessors. The distinction has been gone for many
years now; however, the now duplicate two sets of accessors remained
with the pointer based ones - this_cpu_*() - evolving various other
operations over time. During the process, we also accumulated other
inconsistent operations.
This pull request contains Christoph's patches to clean up the
duplicate accessor situation. __get_cpu_var() uses are replaced with
with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().
Unfortunately, the former sometimes is tricky thanks to C being a bit
messy with the distinction between lvalues and pointers, which led to
a rather ugly solution for cpumask_var_t involving the introduction of
this_cpu_cpumask_var_ptr().
This converts most of the uses but not all. Christoph will follow up
with the remaining conversions in this merge window and hopefully
remove the obsolete accessors"
* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
irqchip: Properly fetch the per cpu offset
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
Revert "powerpc: Replace __get_cpu_var uses"
percpu: Remove __this_cpu_ptr
clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
sparc: Replace __get_cpu_var uses
avr32: Replace __get_cpu_var with __this_cpu_write
blackfin: Replace __get_cpu_var uses
tile: Use this_cpu_ptr() for hardware counters
tile: Replace __get_cpu_var uses
powerpc: Replace __get_cpu_var uses
alpha: Replace __get_cpu_var
ia64: Replace __get_cpu_var uses
s390: cio driver &__get_cpu_var replacements
s390: Replace __get_cpu_var uses
mips: Replace __get_cpu_var uses
MIPS: Replace __get_cpu_var uses in FPU emulator.
arm: Replace __this_cpu_ptr with raw_cpu_ptr
...
