As usual, there are many patches addressing minor issues in existing
DTS files, such as DTC warnings, or adding support for additional
peripherals.
There are three added SoCs in existing product families:
- Amazon:
Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
otherwise known as AL73400 or first-generation Graviton, and following
the already supported Cortex-A1`5 and Cortex-A57 based Alpine chips.
This one is added together with the official Evaluation platform.
- Qualcomm:
The Snapdragon SDM630 platform is a family of mid-range mobile phone
chips from 2017 based on Cortex-A53 or Kryo 260 CPUs.
A total of five end-user products are added based on these, all
Android phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and
XA2 Ultra.
- Renesas:
RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
family, and apparently closely related to the RZ/G2N and RZ/G2M
models we already support but has a faster GPU and additional
on-chip peripherals.
It is added along with the HopeRun HiHope RZ/G2H development board
A small number of new boards for already supported SoCs also debut:
- Allwinner sunxi:
Only one new machine, revision v1.2 of the Pine64 PinePhone
(non-Android) smartphone, containing minor changes compared to
earlier versions.
- Amlogic Meson:
WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
- Aspeed:
EthanolX is AMD's EPYC data center rerence platform, using an
ASpeed AST2600 baseboard management controller.
- Mediatek:
Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook
based on the MT8183 (Helio P60t) SoC.
- Nvidia Tegra:
ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
Thanks to PostmarketOS, these can now run mainline kernels
and become useful again.
The Jetson Xavier NX Developer Kit uses a SoM and carrier board
for the Tegra194, their latest 64-bit chip based on Carmel CPU
cores and Volta graphics.
- NXP i.MX:
Five new boards based on the 32-bit i.MX6 series are added:
The MYiR MYS-6ULX single-board computer, and four different
models of industrial computers from Protonic.
- Qualcomm:
MikroTik RouterBoard 3011 is a rackmounted router based on the
32-bit IPQ8064 networking SoC
Three older phones get added, the Snapdragon 808 (msm8992) based
Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
Windows Phone, and the Snapdragon 810 (msm8994) based Sony
Xperia Z5.
- Renesas:
In addition to the HiHope RZ/G2H board mentioned above, we gain
support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
RZ/G2N reference boards.
Beacon EmbeddedWorks adds another SoM+Carrier development board
for RZ/G2M.
- Rockchips:
Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it
is based on, using the high-end 32-bit rk3288 SoC.
Notable updates to existing platforms are usually for added on-chip
peripherals, including:
- ASpeed AST2xxx (various)
- Allwinner (cpufreq, thermal, Pinephone touchscreen)
- Amlogic Meson (audio, gpu dvdfs, board updates)
- Arm Versatile
- Broadcom (board updates for switch ports, Raspberry pi clock updates)
- Hisilicon (various)
- Intel/Altera SoCFPGA (various)
- Marvell Armada 7xxx/8xxx (smmu)
- Marvell MMP (GPU on mmp2/mmp3)
- Mediatek mt8183 (USB, pericfg)
- NXP Layerscape (VPU, thermal, DSPI)
- NXP i.MX (VPU, bindings, board updates)
- Nvidia Tegra194 (GPU)
- Qualcomm (GPU, Interconnect, ...)
- Renesas R-Car (SPI, IPMMU, board updates)
- STMicroelectronics STM32 (various)
- Samsung Exynos (various)
- Socionext Uniphier (updates to serial, and pcie)
- TI K3 (serdes, usb3, audio, sd, chipid)
- TI OMAP (IPU/DSP remoteproc changes, dropping platform data)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl8j3zoACgkQmmx57+YA
GNlOAQ//RuU0v5AyUyZZGsYKcKltg0qCiUj+CWldlaHS41oJQ9UC4e2kqhZtR28V
Cqe853h976Xm74Fr7Hci4OCo9wxGrNLXFgNkNrYzR9ud76eEcSTQX8Jj9slZvLVu
fEzNOK4VD0cIDRkw5xNZfGHGUSN7ttOV+NClVSA2zBiKv8jNivRI24+vvc+f92yb
d5P7+aeex19xSOiMmuuj5yBbU+85pbR5aoRRS5Ohe5mVL5wW9LQTs7Otsk989FBe
jOCthKfPFtxTTYMrWmM3P0DcHku/MNAsRQKUysrJlMcSefXOgkfMuN6cw4xypXAS
OvFNnIp8cigt8MLWIyU2AiLkkr3FpEsZQliy4XTBl1n6mGlRHB5wD8i294cLtQlJ
EO5yu3I3UimIyG7i4aWCy0sJMYedDrnoYisQk00aDbzea7quSuXC9yo9IompdBsr
Fqn5D7tFnVs79v/2zDhqlMU8GmFSoqPyfPSE3dgLCOHlMdd2ToD9I4ahtsJVZTjk
1Ro9TMFK+b5LIQot1inOPff0aurpZPLA7wmxUfez51IwG4UdVsmtawwPCl6OrgYm
TttK+J1yuCMSxds7QC3rPfiubc+RLEy+IQxP1tR55THg72RDWRnwXTXb5AvAu/vx
GbY1AzGszdr1+mR04CKbFyICG0l0vlyuX9qSsknRW48MaYgn8GQ=
=Tpj3
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, there are many patches addressing minor issues in existing
DTS files, such as DTC warnings, or adding support for additional
peripherals.
There are three added SoCs in existing product families:
- Amazon:
Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
otherwise known as AL73400 or first-generation Graviton, and
following the already supported Cortex-A1`5 and Cortex-A57 based
Alpine chips. This one is added together with the official
Evaluation platform.
- Qualcomm:
The Snapdragon SDM630 platform is a family of mid-range mobile
phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
of five end-user products are added based on these, all Android
phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.
- Renesas:
RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
family, and apparently closely related to the RZ/G2N and RZ/G2M
models we already support but has a faster GPU and additional
on-chip peripherals. It is added along with the HopeRun HiHope
RZ/G2H development board
A small number of new boards for already supported SoCs also debut:
- Allwinner sunxi:
Only one new machine, revision v1.2 of the Pine64 PinePhone
(non-Android) smartphone, containing minor changes compared to
earlier versions.
- Amlogic Meson:
WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
- Aspeed:
EthanolX is AMD's EPYC data center rerence platform, using an
ASpeed AST2600 baseboard management controller.
- Mediatek:
Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
on the MT8183 (Helio P60t) SoC.
- Nvidia Tegra:
ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
Thanks to PostmarketOS, these can now run mainline kernels and
become useful again.
The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
the Tegra194, their latest 64-bit chip based on Carmel CPU cores
and Volta graphics.
- NXP i.MX:
Five new boards based on the 32-bit i.MX6 series are added: The
MYiR MYS-6ULX single-board computer, and four different models of
industrial computers from Protonic.
- Qualcomm:
MikroTik RouterBoard 3011 is a rackmounted router based on the
32-bit IPQ8064 networking SoC
Three older phones get added, the Snapdragon 808 (msm8992) based
Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
Z5.
- Renesas:
In addition to the HiHope RZ/G2H board mentioned above, we gain
support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
RZ/G2N reference boards. Beacon EmbeddedWorks adds another
SoM+Carrier development board for RZ/G2M.
- Rockchips:
Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
based on, using the high-end 32-bit rk3288 SoC.
Notable updates to existing platforms are usually for added on-chip
peripherals, including:
- ASpeed AST2xxx (various)
- Allwinner (cpufreq, thermal, Pinephone touchscreen)
- Amlogic Meson (audio, gpu dvdfs, board updates)
- Arm Versatile
- Broadcom (board updates for switch ports, Raspberry pi clock updates)
- Hisilicon (various)
- Intel/Altera SoCFPGA (various)
- Marvell Armada 7xxx/8xxx (smmu)
- Marvell MMP (GPU on mmp2/mmp3)
- Mediatek mt8183 (USB, pericfg)
- NXP Layerscape (VPU, thermal, DSPI)
- NXP i.MX (VPU, bindings, board updates)
- Nvidia Tegra194 (GPU)
- Qualcomm (GPU, Interconnect, ...)
- Renesas R-Car (SPI, IPMMU, board updates)
- STMicroelectronics STM32 (various)
- Samsung Exynos (various)
- Socionext Uniphier (updates to serial, and pcie)
- TI K3 (serdes, usb3, audio, sd, chipid)
- TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"
* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
arm64: dts: meson: odroid-n2: add jack audio output support
arm64: dts: meson: odroid-n2: enable audio loopback
ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
arm64: dts: qcom: msm8992: Add RPMCC node
arm64: dts: qcom: msm8992: Add PSCI support.
arm64: dts: qcom: msm8992: Add PMU node
arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
arm64: dts: qcom: msm8992: Add a SCM node
arm64: dts: qcom: msm8992: Add a proper CPU map
arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
arm64: dts: qcom: bullhead: Add qcom,msm-id
arm64: dts: qcom: msm8992: Fix SDHCI1
arm64: dts: qcom: msm8992: Modernize the DTS style
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: msm8992: Add a label to rpm-requests
...
For SC7180 this adds the necessary properties for blowing fuses in
qfprom, Coresight fixes, GPU interconnect votes and specifies max speed
for USB controller.
SM8150 and SM8250 gains Adreno SMMU, the graphics management unit and
the GPU nodes, to enable headless GPU usage.
SDM845 gains tracing support for deep idle, GPU bus bandwidth scaling
and DB845c gains the LT9611 HDMI bridge wired up.
MSM8994 gains SMD RPM and SCM support and a new dts for the Sony Xperia
Z5.
MSM8992 is refactored and modernized and gets support for SCM, SPMI,
BLSP2 UART and I2C nodes, PMU, RPM clock controller, PSCI and proper CPU
definitions. Support for the Xiaomi Libra and Microsoft Lumia 950 are
added.
-----BEGIN PGP SIGNATURE-----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=FfiE
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT additional updates for 5.9
For SC7180 this adds the necessary properties for blowing fuses in
qfprom, Coresight fixes, GPU interconnect votes and specifies max speed
for USB controller.
SM8150 and SM8250 gains Adreno SMMU, the graphics management unit and
the GPU nodes, to enable headless GPU usage.
SDM845 gains tracing support for deep idle, GPU bus bandwidth scaling
and DB845c gains the LT9611 HDMI bridge wired up.
MSM8994 gains SMD RPM and SCM support and a new dts for the Sony Xperia
Z5.
MSM8992 is refactored and modernized and gets support for SCM, SPMI,
BLSP2 UART and I2C nodes, PMU, RPM clock controller, PSCI and proper CPU
definitions. Support for the Xiaomi Libra and Microsoft Lumia 950 are
added.
* tag 'qcom-arm64-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
arm64: dts: qcom: msm8992: Add RPMCC node
arm64: dts: qcom: msm8992: Add PSCI support.
arm64: dts: qcom: msm8992: Add PMU node
arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
arm64: dts: qcom: msm8992: Add a SCM node
arm64: dts: qcom: msm8992: Add a proper CPU map
arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
arm64: dts: qcom: bullhead: Add qcom,msm-id
arm64: dts: qcom: msm8992: Fix SDHCI1
arm64: dts: qcom: msm8992: Modernize the DTS style
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: msm8992: Add a label to rpm-requests
arm64: dts: qcom: msm8994: Add SCM node
arm64: dts: qcom: sdm845-db845c: Add hdmi bridge nodes
arm64: dts: qcom: add sm8250 GPU nodes
...
Link: https://lore.kernel.org/r/20200730052003.649940-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for audio on jack socket of the odroid-n2
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200701094556.194498-3-jbrunet@baylibre.com
Add capture pcm interfaces and loopback routes to the odroid-n2
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200701094556.194498-2-jbrunet@baylibre.com
These are the latest device tree fixes for Arm SoCs:
- TI Keystone2 ethernet regressed after a driver change broke with
incorrect phy-mode in a board's DT source.
- A similar fix is needed for two i.MX boards that were missed in
an earlier bugfix.
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
- Two fixes for the Allwinner SoCs, one to relax the CMA allocation
ranges that were failing on older SoCs and one to fix Cedrus on the H6.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qXc9
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master
Pull ARM SoC DT fixes from Arnd Bergmann:
"These are the latest device tree fixes for Arm SoCs:
- TI Keystone2 ethernet regressed after a driver change broke with
incorrect phy-mode in a board's DT source.
- A similar fix is needed for two i.MX boards that were missed in an
earlier bugfix.
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
- Two fixes for the Allwinner SoCs, one to relax the CMA allocation
ranges that were failing on older SoCs and one to fix Cedrus on the
H6"
* tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy
ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2
ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2
arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
ARM: dts sunxi: Relax a bit the CMA pool allocation range
Add device tree support for the Microsoft Lumia 950 smartphone.
It is based on msm8992 and supports booting Linux via a custom
EDK2 port.
Currently it supports:
* Screen console via EFIFB
* Booting via EFI_STUB
* SDHCI
* I2C
* PSCI core bringup
Please note that there is an implementation of EL2 startup
on this board, but it requires the user to resign from
PSCI and use spin-table instead. This revision sticks with
PSCI.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-14-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit adds support for the Xiaomi Libra (Mi 4C)
smartphone. It's based on the Qualcomm msm8992 SoC.
It currently supports:
* Screen console from bootloader
* SDHCI
* Regulator configuration
* Serial console
* I2C
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-13-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This SoC's firmware does not fully support the PSCI
spec, but it's good enough to bring the cores up.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-11-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for I2C to enable support for peripherals
such as touchscreens or sensors. Also add BLSP_UART2 interface.
Please note that the naming scheme follows downstream and as
abominable as it is, that's what we get.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-9-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This pinout is common for every 8992-based device and
should therefore reside in the SoC device tree.
Also convert addresses into phandles.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-5-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the property required for the bootloader to select
the correct device tree blob. It has been removed from
the SoC device tree as it should be set on a per-device
basis.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-4-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit ensures the correct IRQ type is set
and disables the device by default.
The mmc-hs400-1_8v property is also moved to
Bullhead as it might not be present on all boards.
The node has been renamed to sdhci@ instead of mmc@
and the phandle was changed to sdhc_1 to comply with
the newer DTS style.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-3-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Following changes have been made:
- remove name, compatible and msm-id
- wrap clocks in clocks{}
- order nodes by name and by address
- clock_gcc -> gcc
- msmgpio -> tlmm
- retire msm8992-pins.dtsi
- add some of the missing pins
- make comments C-style
- make apcs a mailbox
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-2-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add device tree support for the Sony Xperia Z5 smartphone.
It's based on Sony Kitakami platform (msm8994) and hence
a Kitakami-common DTSI has been created so as to reduce
clutter when remaining devices are added.
The board currently supports
* Serial
* SDHCI
* I2C
* Regulator configuration
* pstore log dump
* GPIO keys
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-9-konradybcio@gmail.com
[bjorn: Changed vendor identifier in board compatible from somc to sony]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This was the only device using that dtsi, so no point
keeping it separate AND with a confusing name (bullhead
is based on msm8992 and the file contains regulator
values for that specific board).
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-8-konradybcio@gmail.com
[bjorn: Squashed with change that remove regulators from msm8992.dtsi]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add opp-peak-kBps bindings to the GPU opp table, listing the peak
GPU -> DDR bandwidth requirement for each opp level. This will be
used to scale the DDR bandwidth along with the GPU frequency dynamically.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/1594992579-20662-7-git-send-email-akhilpo@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds the interconnects property to the GPU node. This enables
the GPU->DDR path bandwidth voting.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/1594992579-20662-6-git-send-email-akhilpo@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds the interconnects property for the gpu node and the
opp-peak-kBps property to the opps of the gpu opp table. This should
help enable DDR bandwidth scaling dynamically and proportionally to the
GPU frequency.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/1594992579-20662-5-git-send-email-akhilpo@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add "qcom,replicator-loses-context" property to the replicator
in Always-on domain in SC7180 SoC to enable coresight replicator
driver to handle this variation of replicator designs.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/5072d94849cfaee46748d26ac997212fb2d783c2.1591708204.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add "qcom,skip-power-up" property to skip powering up ETM
on SC7180 SoC to workaround a hardware errata where CPU
watchdog counter is stopped when ETM power up bit is set
(i.e., when TRCPDCR.PU = 1).
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/8c5ff297d8c89d9d451352f189baf26c8938842a.1591708204.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5
I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
to silence the error, then (re)add it to the VIM3L dts.
Fixes: 4f26cc1c96 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi")
Fixes: 700ab8d839 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200721015950.11816-1-christianshewitt@gmail.com
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
- new board: WeTek Core2
- audio playback support on more boards
- add GPU DVFS
-----BEGIN PGP SIGNATURE-----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=ibOR
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: amlogic: updates for v5.9 (round 2)
- new board: WeTek Core2
- audio playback support on more boards
- add GPU DVFS
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS
arm64: dts: amlogic: meson-gxm: add the Mali OPP table and use DVFS
arm64: dts: amlogic: meson-gx: add the Mali-450 OPP table and use DVFS
arm64: dts: meson: add support for the WeTek Core 2
dt-bindings: arm: amlogic: add support for the WeTek Core 2
arm64: dts: meson: add audio playback to khadas-vim3l
arm64: dts: meson: add audio playback to odroid-c4
arm64: dts: meson: update spifc node name on Khadas VIM3/VIM3L
ARM: dts: meson: Align L2 cache-controller nodename with dtschema
arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
arm64: dts: meson: add missing gxl rng clock
soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
Link: https://lore.kernel.org/r/7h8sf8671u.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add SMMU support for the Marvell AP806 based SoCs (Armada 70xx and
Armada 80xx)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXxqifwAKCRALBhiOFHI7
1XNMAJ9hlYGp/3IgnOsGzobwdPcCzEPwAQCeO1PB6THGuxV/SMgRCgAnXTCQV3E=
=xYe1
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.9 (part 1)
Add SMMU support for the Marvell AP806 based SoCs (Armada 70xx and
Armada 80xx)
* tag 'mvebu-dt64-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: add SMMU support
- Add platforms chipid nodes for am65x and j721e
- Update latest data sheet values for MMC on am65x
- Add serdes and usb3 support for j721e
- Add analog audio support for j721e
- Add SD card support for am65x
- Rename DT nodes for gic-its/smmu to their standard counterparts am65x/j721e
- HTTP links replaced with HTTPS ones
-----BEGIN PGP SIGNATURE-----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=0bPs
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt
Texas Instruments K3 SoC DT updates for v5.9
- Add platforms chipid nodes for am65x and j721e
- Update latest data sheet values for MMC on am65x
- Add serdes and usb3 support for j721e
- Add analog audio support for j721e
- Add SD card support for am65x
- Rename DT nodes for gic-its/smmu to their standard counterparts am65x/j721e
- HTTP links replaced with HTTPS ones
* tag 'ti-k3-dt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line
arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux
arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
arm64: dts: ti: k3-am65/j721e-main: rename gic-its node to msi-controller
arm64: dts: ti: k3-j721e-main: rename smmu node to iommu
arm64: dts: ti: k3-*: Replace HTTP links with HTTPS ones
arm64: dts: ti: k3-am654-base-board: Add support for SD card
arm64: dts: ti: k3-am65-main: Add support for sdhci1
arm64: dts: ti: j721e-common-proc-board: Analog audio support
arm64: dts: ti: k3-j721e-common-proc-board: Remove duplicated main_i2c1_exp4_pins_default
arm64: dts: ti: k3-am654-main: Update otap-del-sel values
arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module node
arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node
Link: https://lore.kernel.org/r/3b3b9214-769d-ba1b-db5e-44414a8c5756@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds the initial support for the Amazon's Annapurna Labs
Alpine v3 Soc and Evaluation Platform (EVP).
Link: https://lore.kernel.org/r/20200724132654.16549-7-hhhawa@amazon.com
Signed-off-by: Ronen Krupnik <ronenk@amazon.com>
Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As preparation to add device tree binding for Amazon's Annapurna Labs
Alpine v3 support. Rename al device tree folder to be amazon.
Link: https://lore.kernel.org/r/20200724132654.16549-3-hhhawa@amazon.com
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes
with it as the underlying Dalang carrier board is shared by both
an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10).
Other than that rk3288 gets its ohci node added that only works
on the fixed rk3288w variant of the soc and some asorted fixes
and improvements for dt-binding-check.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl8YzOAQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgY9aB/0folCAovUA97bILQR/62PspVGR1i/S2GJe
sQqKuWDyBtJNM3IYNVMd/AtcrP+U0ZD4MX6TKbabs+ZuIc4EksXRroMTMm2azme1
rOrQuGSKcdhPobJOHlpbSC/QPWWi5GGGWDnwXY8T68NedeYLP/o8sOmZQtUi80R9
ueP5ZwiviwMrVzRITPb8sB89WEyRqaas2H0fc/4OjGRY/jeTKwCk9sP/JytA6gUB
/GXn+uUk5WcRkekujBi1LVi4BIhm7PMW9kM1AHWAV6+2Yd8uFyG4ut9MB7SmaQt8
QfEoPpLvQicpZCVB3VFOPJ38z4YuOXsqo85u8T3ZkgpLdInoa/J9
=GUhq
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Biggest part is the addition of the rk3288 variant of the VMARC
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes
with it as the underlying Dalang carrier board is shared by both
an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10).
Other than that rk3288 gets its ohci node added that only works
on the fixed rk3288w variant of the soc and some asorted fixes
and improvements for dt-binding-check.
* tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add PCIe for RockPI N10
ARM: dts: rockchip: Add HDMI out for RockPI N8/N10
ARM: dts: rockchip: Add USB for RockPI N8/N10
ARM: dts: rockchip: Add usb host0 ohci node for rk3288
ARM: dts: rockchip: Fix VBUS on rk3288-vyasa
ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support
ARM: dts: rockchip: Add VMARC RK3288 SOM initial support
dt-bindings: arm: rockchip: Add Rock Pi N8 binding
arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier
arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier
arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties
ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM
ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac
ARM: dts: rockchip: Add marvell BT irq config
ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio
Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
first tiny part of the rk3399 camera infrastructure and cleanups + making
dt-binding-check even happier.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl8YxwgQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgdXnB/0eoNoz+ZmX7L3gvPVejBiBBwSUVC21OW+A
c3TtumCUGbHk3lXhb91j+s+qN1sMjOn6tdEAcCVO7gm/FcASXwKcqyKa+/dhLzt5
3/FaXye6THGV/QNk9tZr/hd2XQsg5hwA9Rl3DYJzB4WVWmBiOV3JuwmRlvLqRh7m
AztbZiRvy9f3awWF1XVEW7MYDwVIPmeiGQh6voBYBjTfJyYKCKZDZPcPi4FmRP94
IIlG1NaH3jP8wZVD7yOhxtemY/IPsjFSoSinC7ZksAnRLEUax/AfMsBJQovEfL9M
pkkkI3dxDZ+TokWcGtIaxZSTguV7X2bf5Fxv9UfWCfZ1pvtPB38i
=47gX
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Fuel gauge for Pinebook Pro, the newly added periph-burst flag for pl330s,
first tiny part of the rk3399 camera infrastructure and cleanups + making
dt-binding-check even happier.
* tag 'v5.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac
arm64: dts: rockchip: remove bus-width from mmc nodes in px30 dts files
arm64: dts: rockchip: add rx0 mipi-phy for rk3399
arm64: dts: rockchip: rename and label gpio-led subnodes part 2
arm64: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio
arm64: dts: rockchip: fix rk3399-puma gmac reset gpio
arm64: dts: rockchip: fix rk3399-puma vcc5v0-host gpio
arm64: dts: rockchip: fix rk3368-lion gmac reset gpio
arm64: dts: rockchip: set rockpro64 usbc dr_mode as host
arm64: dts: rockchip: add fuel gauge to Pinebook Pro dts
Link: https://lore.kernel.org/r/2221560.KYr1Tee2JR@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board.
2. Fix silent hang after boot off Exynos7 Espresso board.
3. Minor DTS fixes and adjustments with dtschema.
-----BEGIN PGP SIGNATURE-----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=1MC3
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.9
1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board.
2. Fix silent hang after boot off Exynos7 Espresso board.
3. Minor DTS fixes and adjustments with dtschema.
* tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7
arm64: dts: exynos: Add unit address to soc node on Exynos5433
arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
arm64: dts: exynos: Keep LDO12 always-on on Espresso
arm64: dts: exynos: Fix silent hang after boot on Espresso
arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible
arm64: dts: exynos: Describe PWM interrupts on Exynos7
arm64: dts: exynos: Add UFS node to Exynos7
Link: https://lore.kernel.org/r/20200721180900.13844-3-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.
SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.
SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.
SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support
SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.
IPQ8074 gains USB and SDHCI support.
MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.
MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.
The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.
-----BEGIN PGP SIGNATURE-----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=i4yf
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.9
For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.
SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.
SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.
SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support
SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.
IPQ8074 gains USB and SDHCI support.
MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.
MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.
The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.
* tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (66 commits)
arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains
arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains
arm64: dts: qcom: sc7180: Move the fixed-perm property to SoC dtsi
arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer
arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c
arm64: dts: qcom: msm8916: Simplify pinctrl configuration
arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end of file
arm64: dts: qcom: sm8250: Drop tcsr_mutex syscon
arm64: dts: qcom: sc7180: Add missing properties for Wifi node
arm64: dts: qcom: Fix WiFi supplies on sc7180-idp
arm64: dts: sdm845: add Inline Crypto Engine registers and clock
arm64: dts: sc7180: Add sdhc opps and power-domains
arm64: dts: sdm845: Add sdhc opps and power-domains
arm64: dts: sc7180: Add OPP table for all qup devices
arm64: dts: sdm845: Add OPP table for all qup devices
arm64: dts: sc7180: Add qspi opps and power-domains
arm64: dts: sdm845: Add qspi opps and power-domains
arm64: dts: qcom: sdm845: Add cpu OPP tables
arm64: dts: qcom: sc7180: Drop the unused non-MSA SID
...
Link: https://lore.kernel.org/r/20200721044934.3430084-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refactor hi6220-hikey dts to use phandles for overriding nodes
- Align UART node name to fix dtschema validator warnings for hi6220
- Add basic usb gadget support on hikey960
- Update adv7533 nodes to meet with the binding for hikey and hikey960
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJfFk9pAAoJEAvIV27ZiWZcclYP/2OyRU1WLQr624IzkTunqshF
tgySbXVFC8v7sfUGHV5o4AbTVx27rWkQZXDac3yCiHuUDYzoK3kJtYAQf/3pm8yW
7M5t4GiwmFm0iK5IX3h3jpzz6RdyDT+wG1fbSq/9zvJ8hjfjm4wIO6GG4Cor8nxw
jmE42W7FYkzWkHBzevt46wURbiJvCL17f3eySKCl9wzokhCbJ1jYkt/55kq4Fl9Z
2TuqJ0L4ptviOBzNGACPyymHoXVZHX4kvuPCk3quJlcc/ZUjvCn/8XCg+JliLUVb
JZnkNIu/Hc2MbJclVBUnrofEIkd3nqoW6Vm+pmRCyY0oGuE17QHed8MJ49YHI/jB
bum2PEQwPw+ScIfK7kwx5esh+hUc7eVgf9Rm5woPyZIg9recYPvxWGp9GjzBCWZP
KTQQh2HgZhdGkAc58l+ODfSiQzZa8c042Q4jT+XtRUlrAWW2OxyI/lafvz9E4XEb
JMz1lg3gZKjfZ9Z4IhdsCv4wIMWidnMK4cLFIGLjISSipx5ojDjUDLYpIQ0tA8TP
qufZVhQCHCm8wHjxajgteCRuYs9Hbw8dMgG9J/bCvkpGy4aYLlx7W9tQ506scCJM
pSZKSF3vktbZ5A3wpE70rD/mPcMFSI9d9JIueHO7dORfzBucuFHU3K3BTLkpEym7
1OVZ9BINHqiF2ZL3tvIN
=GARv
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.9
- Refactor hi6220-hikey dts to use phandles for overriding nodes
- Align UART node name to fix dtschema validator warnings for hi6220
- Add basic usb gadget support on hikey960
- Update adv7533 nodes to meet with the binding for hikey and hikey960
* tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding
dts: hi3660: Add support for basic usb gadget on Hikey960
arm64: dts: hisilicon: Align UART nodename with dtschema
arm64: dts: hisilicon: Use phandles for overriding nodes in hi6220
Link: https://lore.kernel.org/r/5F165E8E.3030503@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
support, including:
- CPUFreq / Thermal throttling support for the H5
- Touchscreen support for the Pinephone
- New boards: PinePhone v1.2
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlZAAKCRDj7w1vZxhR
xft/AQCaR2CkyOVyK32yPUX0ZF2nS+LYzalJIUpOuLhy37GQVwEA+vlQTa7fKdtW
4IX58peBkRD8FwTszrwR/tImDPd8Rwg=
=z8pA
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual number of patches to improve the Allwinner Device Tree
support, including:
- CPUFreq / Thermal throttling support for the H5
- Touchscreen support for the Pinephone
- New boards: PinePhone v1.2
* tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPs
arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPs
arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones
arm64: dts: allwinner: h5: Add clock to CPU cores
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores
ARM: dts: sunxi: libretech-all-h3-cc: Add regulator supply to all CPU cores
arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V
arm64: dts: allwinner: Add support for PinePhone revision 1.2
dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings
arm64: dts: sun50i-a64-pinephone: Add touchscreen support
arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone
ARM: dts: orange-pi-zero-plus2: add leds configuration
ARM: dts: orange-pi-zero-plus2: enable USB OTG port
Link: https://lore.kernel.org/r/fa48ffcb-3404-41bb-b065-a16717cf5688.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update i.MX8M OCOTP device node name to match .yaml schema.
- Add ftm_alarm0 device support for layerscape SoCs.
- Add DSPI controller support for lx2160a device.
- A series from Peng Fan to add aliases for various devices on i.MX8
SoCs.
- Add Hantro G1/G2 VPU device support for imx8mq.
- Add more thermal zone support for ls1028a, ls1043a and ls1046a.
- Other small random changes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VVUkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4J8wf+JD5crdfw+/458BsgX30HBfgd++CG
RRJxeqx3CkHsPyMAza9wKWPZDASIDQaWIA3CKf2niQyR7jKxAd9JdMw+hBBMoG+I
4+uMRictK98rODP4bcGlLtUjdoncjCuAoa58tKSAiZ+SAEjlb5UHCXpbKtrPtQuY
r4v+ODV82U1gIdDaZeOS1L40iQHwGO5/Aq+Ua8UvraoMTgHMW6Il86XlbE3Gk1Ql
YrqAteG9SJm5cFRbrmmKisA3rLZoYqYYZ1Tb66kDKBrmTTzZTBmHE+5SE7DJwFh5
c74BHkARhw0lXhpQzcEK9jnR88+ZUqL+qbteVmotB4+54WbFrJEJ4/BejA==
=sjzz
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.9:
- Update i.MX8M OCOTP device node name to match .yaml schema.
- Add ftm_alarm0 device support for layerscape SoCs.
- Add DSPI controller support for lx2160a device.
- A series from Peng Fan to add aliases for various devices on i.MX8
SoCs.
- Add Hantro G1/G2 VPU device support for imx8mq.
- Add more thermal zone support for ls1028a, ls1043a and ls1046a.
- Other small random changes.
* tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
arm64: dts: lx2160a-rdb: fix shunt-resistor value
arm64: dts: ls1028a-qds: Add DSPI flash nodes
arm64: dts: lx2160a: Increase configuration space size
arm64: dts: zii-ultra: update MDIO speed and preamble
arm64: dts: ls1043a: update USB nodes status to match board config
arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board
arm64: dts: imx8mp: add ddr pmu device node
arm64: dts: ls1043a: add more thermal zone support
arm64: dts: ls1046a: add more thermal zone support
arm64: dts: layerscape: add ftm_alarm0 node
arm64: dts: ls1028a: Add ftm_alarm0 DT node
arm64: dts: lx2160a: add ftm_alarm0 DT node
arm64: dts: lx2160a: add DT node for all DSPI controller
arm64: dts: lx2160a: add dspi controller DT nodes
arm64: dts: imx8mp: Add fallback compatible to ocotp node
arm64: dts: imx8qxp: Add ethernet alias
arm64: dts: imx8qxp: add i2c aliases
arm64: dts: imx8qxp: add alias for lsio MU
arm64: dts: imx8m: add mu node
arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs
...
Link: https://lore.kernel.org/r/20200720085536.24138-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
