Make sure to freeze the configuration of the chip during the programming
of 32-bit registers. This avoids the processing of invalid intermediate
states.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-9-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clock skip function of this chip is not necessarily desirable in
all hardware appliances. This patch makes the feature configurable
through a device-tree property.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-8-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The CS2000 chip features two input clocks, REF_CLK and CLK_IN.
In static mode, the output clock (CLK_OUT) is directly derived from
REF_CLK, and CLK_IN is ignored. In dynamic mode, CLK_IN is used by the
digital PLL.
In dynamic mode, a low-frequency ratio configuration that uses a higher
multiplier factor.
Until now, only the static mode and high-frequency divider rations of
the hardware was supported by the driver. This patch adds support for
dynamic mode and both ratios:
* Parse a new OF property 'cirrus,dynamic-mode' to determine the mode
* In dynamic mode, present CLK_IN as parent clock, else use REF_CLK
* The low-frequency ratio mode is automatically selected, depending
on the mode of operation and the given input and output rates
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-7-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The aux output pin can be configured to output either of the two clock
inputs, the generated clock or the pll lock status. Allow access to
this feature through a new optional device-tree property.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220125093336.226787-6-daniel@zonque.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
and one oops fix.
- Fix license on recent MediaTek drivers
- Initialize a variable before use in the new Visconti driver
- Avoid an oops by unregistering the clk provider in si5341
-----BEGIN PGP SIGNATURE-----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=rPL2
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Some hot fixes for clk driver patches merged last week and one oops
fix:
- Fix license on recent MediaTek drivers
- Initialize a variable before use in the new Visconti driver
- Avoid an oops by unregistering the clk provider in si5341"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: relicense mt7986 clock driver to GPL-2.0
clk: visconti: Fix uninitialized variable in printk
clk: si5341: Fix clock HW provider cleanup
The previous mt7986 clock drivers were incorrectly marked as GPL-1.0.
This patch changes the driver to the standard GPL-2.0 license.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Link: https://lore.kernel.org/r/20220119123658.10095-2-sam.shih@mediatek.com
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The "pll_clck" variable is uninitialized. The "ret" error code was
supposed to be printed instead.
Fixes: b4cbe606dc ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220111072529.GJ11243@kili
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The call to of_clk_add_hw_provider was not undone on remove or on probe
failure, which could cause an oops on a subsequent attempt to retrieve
clocks for the removed device. Switch to the devm version of the
function to avoid this issue.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220112203816.1784610-1-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support. Per usual (or maybe just recent trends), Qualcomm gains a
handful of SoC drivers additions and has the largest diffstat. After
that there are quite a few updates to the Allwinner (sunxi) drivers to
support modular drivers and Renesas is heavily updated to add more
support for various clks. Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock
drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers
-----BEGIN PGP SIGNATURE-----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=jB+l
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support.
Per usual (or maybe just recent trends), Qualcomm gains a handful of
SoC drivers additions and has the largest diffstat. After that there
are quite a few updates to the Allwinner (sunxi) drivers to support
modular drivers and Renesas is heavily updated to add more support for
various clks.
Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in
drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2
clock drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits)
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
clk: bm1880: remove kfrees on static allocations
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
clk: Enable/Disable runtime PM for clk_summary
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
...
- Clock and reset driver for Toshiba Visconti SoCs
* clk-socfpga:
clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource()
clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource()
clk: socfpga: remove redundant assignment after a mask operation
clk: socfpga: remove redundant assignment on division
* clk-toshiba:
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC
dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC
* clk-st:
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
* clk-bitmain:
clk: bm1880: remove kfrees on static allocations
* clk-x86:
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: Introduce clk-tps68470 driver
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
* clk-stm:
clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell
* clk-amlogic:
clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB
* clk-allwinner:
clk: sunxi-ng: Add support for the D1 SoC clocks
clk: sunxi-ng: gate: Add macros for gates with fixed dividers
clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw
clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw
clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw
dt-bindings: clk: Add compatibles for D1 CCUs
clk: sunxi-ng: Allow the CCU core to be built as a module
clk: sunxi-ng: Convert early providers to platform drivers
clk: sunxi-ng: Allow drivers to be built as modules
clk: sunxi-ng: Export symbols used by CCU drivers
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement
-----BEGIN PGP SIGNATURE-----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=MByd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
This adds support for the StarFive JH7100, including the necessary
device drivers and DT files for the BeagleV Starlight prototype
board, with additional boards to be added later. This SoC promises
to be the first usable low-cost platform for RISC-V.
I've taken this through the SoC tree in the anticipation of adding
a few other Arm based SoCs as well, but those did not pass the
review in time, so it's only this one.
-----BEGIN PGP SIGNATURE-----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=X5uk
-----END PGP SIGNATURE-----
Merge tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull RISC-V SoC updates from Arnd Bergmann:
"Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary
device drivers and DT files for the BeagleV Starlight prototype board,
with additional boards to be added later. This SoC promises to be the
first usable low-cost platform for RISC-V.
I've taken this through the SoC tree in the anticipation of adding a
few other Arm based SoCs as well, but those did not pass the review in
time, so it's only this one"
* tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
reset: starfive-jh7100: Fix 32bit compilation
RISC-V: Add BeagleV Starlight Beta device tree
RISC-V: Add initial StarFive JH7100 device tree
serial: 8250_dw: Add StarFive JH7100 quirk
dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
pinctrl: starfive: Add pinctrl driver for StarFive SoCs
dt-bindings: pinctrl: Add StarFive JH7100 bindings
dt-bindings: pinctrl: Add StarFive pinctrl definitions
reset: starfive-jh7100: Add StarFive JH7100 reset driver
dt-bindings: reset: Add Starfive JH7100 reset bindings
dt-bindings: reset: Add StarFive JH7100 reset definitions
clk: starfive: Add JH7100 clock generator driver
dt-bindings: clock: starfive: Add JH7100 bindings
dt-bindings: clock: starfive: Add JH7100 clock definitions
dt-bindings: interrupt-controller: Add StarFive JH7100 plic
dt-bindings: timer: Add StarFive JH7100 clint
RISC-V: Add StarFive SoC Kconfig option
As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms.
All the newly supported SoCs belong into existing families
this time:
- Qualcomm gets support for two newly announced platforms, both
of which can now work in production environments: the SDX65
5G modem that can run a minimal Linux on its Cortex-A7 core,
and the Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3
family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread
i.MX8 series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that
we have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013,
while MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two
new SoCs, plus a number of Chromebook variants and phones based
on the Snapdragon 7c, 845 and 888 SoCs, including various
Sony Xperia devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit
chips out of the box, including a number of ASUS Transformer
tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top
box based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908.
-----BEGIN PGP SIGNATURE-----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=IF3G
-----END PGP SIGNATURE-----
Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
Clang warns:
drivers/clk/visconti/pll.c:292:20: warning: address of array 'ctx->clk_data.hws' will always evaluate to 'true' [-Wpointer-bool-conversion]
if (ctx->clk_data.hws && id)
~~~~~~~~~~~~~~^~~ ~~
1 warning generated.
This array cannot be NULL if ctx is not NULL, which is allocated in
visconti_init_pll(), so just remove the check, which matches other clk
drivers.
Fixes: b4cbe606dc ("clk: visconti: Add support common clock driver and reset driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1564
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220107183303.2337676-1-nathan@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MT7986 clock support, include topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Link: https://lore.kernel.org/r/20211217121148.6753-4-sam.shih@mediatek.com
Reviewed-by: Ryder Lee <ryder.lee@kernel.org>
[sboyd@kernel.org: Fix typos in Kconfig, there are more existing typos
from where they were copied from of but whatever]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Appropriately change calls to regmap_update_bits() with regmap_set_bits()
and regmap_clear_bits() for improved readability.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220103143712.46675-2-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a clockgating bit check helper and use it in functions
mtk_cg_bit_is_cleared(), mtk_cg_bit_is_set() to shrink the
file size.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220103143712.46675-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In newer SoC we have to clear bit for disabling 48MHz oscillator
clock gate. Remove CLK_GATE_SET_TO_DISABLE flag for proper enable
and disable of 48MHz clock.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-6-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Replace hard coded con_id string with fch_data->name. We have clk
consumers looking up with different clock names, hence use dynamic
con_id string during clk lookup registration. fch_data->name will
be initialized in acpi driver based on fmw property value.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-5-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
FCH controller clock configuration slightly differs across AMD's
SOC architectures. Newer family of SOC only support a 48MHz fix
clock while stoney SOC family has a clk_mux to choose 48MHz and
25 MHz clk. At present fixed clk support is only enabled for RV
architecture using "is-rv" device property initialized from boot
loader. This limit 48MHz fixed clock gate support to RV platform
unless we add similar device property in boot loader for other
architectures.
Add pci_device_id table with Stoney platform id and replace "is-rv"
device property check with pci id match to add clk mux support with
25MHz and 48MHz clk support based on clk mux selection. This enable
48Mhz fixed fch clock support by default on all newer SOC's except
stoney. Also replace RV with FIXED as a generic naming conventions
across all platforms and changed module description.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Link: https://lore.kernel.org/r/20211212180527.1641362-2-AjitKumar.Pandey@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Ingenic JZ4760 and JZ4770 both have an extra DMA core named BDMA
dedicated to the NAND and BCH controller, but which can also do
memory-to-memory transfers. The JZ4760 additionally has a DMA core named
MDMA dedicated to memory-to-memory transfers. The programming manual for
the JZ4770 does have a bit for a MDMA clock, but does not seem to have
the hardware wired in.
Add the BDMA and MDMA clocks to the JZ4760 CGU code, and the BDMA clock
to the JZ4770 code, so that the BDMA and MDMA controllers can be used.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211220193319.114974-3-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
bm1880_clk_unregister_pll & bm1880_clk_unregister_div both try to
free statically allocated variables, so remove those kfrees.
For example, if we take L703 kfree(div_hw):
- div_hw is a bm1880_div_hw_clock pointer
- in bm1880_clk_register_plls this is pointed to an element of arg1:
struct bm1880_div_hw_clock *clks
- in the probe, where bm1880_clk_register_plls is called arg1 is
bm1880_div_clks, defined on L371:
static struct bm1880_div_hw_clock bm1880_div_clks[]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 1ab4601da5 ("clk: Add common clock driver for BM1880 SoC")
Link: https://lore.kernel.org/r/20211223154244.1024062-1-conor.dooley@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit 21e743300d ("clk: stm32mp1: new compatible for secure RCC support")
introduced a new Kconfig option COMMON_CLK_STM32MP157_SCMI which is not
used anywhere.
Further, it looks like this Kconfig option is just to select bunch of other
options which doesn't sound correct to me. There is no need for another
SCMI firmware based clock driver and hence the same applies for the config
option too.
Let us just drop the unused COMMON_CLK_STM32MP157_SCMI before it gives
someone idea to write a specific clock driver for this SoC/platform.
Cc: Etienne Carriere <etienne.carriere@foss.st.com>
Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20211015150043.140793-1-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to avoid having duplicated addresses within the DT,
only have one unit-address per clockgen and each driver within
the clockgen should look at the parent node (overall clockgen)
to figure out the reg property. Such behavior is already in
place in other STi platform clock drivers such as clk-flexgen
and clkgen-pll. Keep backward compatibility by first looking
at reg within the node before looking into the parent node.
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lore.kernel.org/r/20211218211157.188214-3-avolmat@me.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to avoid having duplicated addresses within the DT,
only have one unit-address per clockgen and each driver within
the clockgen should look at the parent node (overall clockgen)
to figure out the reg property. Such behavior is already in
place in other STi platform clock drivers such as clk-flexgen
and clkgen-pll. Keep backward compatibility by first looking
at reg within the node before looking into the parent node.
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lore.kernel.org/r/20211218211157.188214-2-avolmat@me.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The registers for some clocks in the SOC area, which are under the power
domain are required to be enabled before accessing them. During the
clk_summary if the power-domains are not enabled they could result into
NoC errors.
Thus ensure the register access of the clock controller is done with
pm_untime_get/put functions.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-3-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for common interface of the common clock and reset driver
for Toshiba Visconti5 and its SoC, TMPV7708. The PIPLLCT provides the PLL,
and the PISMU provides clock and reset functionality.
Each drivers are provided in this patch.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211025031038.4180686-4-nobuhiro1.iwamatsu@toshiba.co.jp
[sboyd@kernel.org: Add bitfield.h include to pll.c]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210907085144.4458-1-caihuoqing@baidu.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210907085137.4407-1-caihuoqing@baidu.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The assignment operation after a & mask operation is redundant, the
variables being assigned are not used afterwards. Replace the &=
operator with just & operator.
Cleans up two clang-scan warnings:
drivers/clk/socfpga/clk-gate.c:37:10: warning: Although the value stored
to 'l4_src' is used in the enclosing expression, the value is never
actually read from 'l4_src' [deadcode.DeadStores]
return l4_src &= 0x1;
^ ~~~
drivers/clk/socfpga/clk-gate.c:46:10: warning: Although the value stored
to 'perpll_src' is used in the enclosing expression, the value is never
actually read from 'perpll_src' [deadcode.DeadStores]
return perpll_src &= 0x3;
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211230150321.167576-1-colin.i.king@gmail.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The variable parent_rate is being divided by div and the result
is re-assigned to parent_rate before being returned. The assignment
is redundant, replace /= operator with just / operator.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211221003750.212780-1-colin.i.king@gmail.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This introduces bindings and drivers for the global clock controllers
found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for
SDX65 and SM8450.
It cleans up the SMD RPM clock driver and it adds includes for
clk-provider.h throughout the clock providers that was lacking this.
-----BEGIN PGP SIGNATURE-----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=PGNc
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull qcom clk driver updates from Bjorn Andersson:
This introduces bindings and drivers for the global clock controllers
found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for
SDX65 and SM8450.
It cleans up the SMD RPM clock driver and it adds includes for
clk-provider.h throughout the clock providers that was lacking this.
* tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
clk: qcom: turingcc-qcs404: explicitly include clk-provider.h
clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h
clk: qcom: mmcc-apq8084: explicitly include clk-provider.h
clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h
clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h
clk: qcom: gcc-sm6350: explicitly include clk-provider.h
clk: qcom: gcc-msm8994: explicitly include clk-provider.h
clk: qcom: gcc-sm8350: explicitly include clk-provider.h
clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver
dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller
clk: qcom: Add clock driver for SM8450
clk: qcom: Add SDX65 GCC support
clk: qcom: Add LUCID_EVO PLL type for SDX65
dt-bindings: clock: Add SM8450 GCC clock bindings
dt-bindings: clock: Add SDX65 GCC clock bindings
clk: qcom: rpmh: add support for SM8450 rpmh clocks
dt-bindings: clock: Add RPMHCC bindings for SM8450
clk: qcom: smd-rpm: Drop binary value handling for buffered clock
clk: qcom: smd-rpm: Drop the use of struct rpm_cc
clk: qcom: smd-rpm: Drop MFD qcom-rpm reference
...
The gcc cfg noc lpass clock is required to be always enabled for the
LPASS core and audio drivers to be functional.
Fixes: a3cc092196 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
PLL poll for lock detection can take more than 100us for certain type
of Lucid PLLs and also the new PLLs types(Lucid EVO), thus update to 200us.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-9-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-8-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-7-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-6-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-5-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-4-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-3-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-2-vkoul@kernel.org
This is an initial implementation adding basic clocks, such as UART,
USI, I2C, WDT, ect. and their parent clocks. It is heavily based on the
Exynos850 clock driver at 'drivers/clk/samsung/clk-exynos850.c' which
was made by Sam Protsenko, thus the copyright and author lines were
kept.
Bus clocks are enabled by default as well to avoid hangs while trying to
access CMU registers.
Only the parts of CMU_TOP needed for CMU_CORE and CMU_PERI, a bit of
CMU_CORE, and most of CMU_PERI is implemented as of now.
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206153124.427102-7-virag.david003@gmail.com
pll1417x is used in Exynos7885 SoC for top-level integer PLLs.
It is similar enough to pll0822x that practically the same code can
handle both. The difference that's to be noted is that when defining a
pl1417x PLL, the "con" parameter of the PLL macro should be set to the
CON1 register instead of CON3, like this:
PLL(pll_1417x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON0_PLL_SHARED0,
NULL),
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211206153124.427102-6-virag.david003@gmail.com
Rename exynos850_register_cmu to exynos_arm64_register_cmu and move it
to a new file called "clk-exynos-arm64.c".
This should have no functional changes, but it will allow this code to
be shared between other arm64 Exynos SoCs, like the Exynos7885 and
possibly ExynosAuto V9.
Signed-off-by: David Virag <virag.david003@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206153124.427102-5-virag.david003@gmail.com
System Register is used to configure system behavior, like USI protocol,
etc. SYSREG clocks should be provided to corresponding syscon nodes, to
make it possible to modify SYSREG registers.
While at it, add also missing PMU and GPIO clocks, which looks necessary
and might be needed for corresponding Exynos850 features soon.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20211217161549.24836-3-semen.protsenko@linaro.org