It's possible that dev_set_name() returns -ENOMEM, catch and handle this.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220708015948.4091-1-liubo03@inspur.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The Foxconn e0c3 device identifies itself as a T99W175 X55, add support
for this to the pci_generic driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220627170717.2252335-1-bjorn.andersson@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
During runtime, the MHI endpoint may be powered up/down several times.
So instead of allocating and destroying the IRQs all the time, let's just
enable/disable IRQs during power up/down.
The IRQs will be allocated during mhi_register_controller() and freed
during mhi_unregister_controller(). This works well for things like PCI
hotplug also as once the PCI device gets removed, the controller will
get unregistered. And once it comes back, it will get registered back
and even if the IRQ configuration changes (MSI), that will get accounted.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1655952183-66792-1-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cinterion MV31-W modem with a new baseline (firmware) is sold as a separate
product with different device ID. So add support for the same reusing the
config.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220622032544.17713-1-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The product's enumeration align with previous Quectel EM120R-GL, so the
EM120 FCCL would use the same config as Quectel EM120R-GL.
Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/MEYP282MB2374837FFCB18B12BFDEDE80FDCF9@MEYP282MB2374.AUSP282.PROD.OUTLOOK.COM
[mani: added pci_generic prefix to subject and aligned the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
Including:
- Intel VT-d driver updates
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU
legacy binding
- Minor cleanups
- Patches to fix a BUG_ON in the vfio_iommu_group_notifier
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group
is either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Patches to make forcing of cache-coherent DMA more coherent
between IOMMU drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmKWCbUACgkQK/BELZcB
GuPHmRAAuoH9iK/jrC3SgrqpBfH2iRN7ovIX8dFvgbQWX27lhXF4gvj2/nYdIvPK
75j/LmdibuzV3Iez4kjbGKNG1AikwK3dKIH21a84f3ctnoamQyL6nMfCVBFaVD/D
kvPpTHyjbGPNf6KZyWQdkJ5DXD1aoG1DKkBnslH5pTNPqGuNqbcnRTg0YxiJFLBv
5w2B6jL06XRzunh+Sp1Dbj+po8ROjLRCEU+tdrndO8W/Dyp6+ZNNuxL9/3BM9zMj
py0M4piFtGnhmJSdym1eeHm7r1YRjkZw+MN+e8NcrcSihmDutEWo7nRRxA5uVaa+
3O2DNERqCvQUYxfNRUOKwzV8v51GYQHEPhvOe/MLgaEQDmDmlF2dHNGm93eCMdrv
m1cT011oU7pa4qHomwLyTJxSsR7FzJ37igq/WeY++MBhl+frqfzEQPVxF+W7GLb8
QvT/+woCPzLVpJbE7s0FUD4nbPd8c1dAz4+HO1DajxILIOTq1bnPIorSjgXODRjq
yzsiP1rAg0L0PsL7pXn3cPMzNCE//xtOsRsAGmaVv6wBoMLyWVFCU/wjPEdjrSWA
nXpAuCL84uxCEl/KLYMsg9UhjT6ko7CuKdsybIG9zNIiUau43uSqgTen0xCpYt0i
m//O/X3tPyxmoLKRW+XVehGOrBZW+qrQny6hk/Zex+6UJQqVMTA=
=W0hj
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
We can get "failed to disable" clock_unprepare warnings on unbind at least
for the serial console device if the unbind is done before the device has
been idled.
As some devices are using deferred idle, we must check the status for
pending idle work to idle the device.
Fixes: 76f0f772e4 ("bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init")
Cc: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220512053021.61650-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MHI Host
--------
Support for new modems:
- Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
- Telit FN980 v1 based on SDX55
- Telit FN990 based on SDX65
- Foxconn T99W373/T99W368 based on SDX62/SDX65
Core changes:
- During the recycle of event ring elements, compute the ctxt_wp based on the
local cached value instead of reading from shared memory. This is to prevent
the possible corruption of the ctxt_wp as some of the endpoint devices could
modify the value in shared memory.
- Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
spec allows the host to hard reset the device in the case of an unrecoverable
error and all other reset mechanisms have failed.
- During MHI shutdown, wait for the endpoint device to enter the ready state
post reset before proceeding. This is to avoid a possible race where host
would remove the interrupt handler and device will send ready state
interrupt, resulting in IOMMU fault.
- Bail out updating the MHI register if the read has failed during
read/modify/write.
- Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
register fields in mhi_init_mmio().
MAINTAINERS change:
- Since Qualcomm has moved the email domain for its employess from codeaurora
domain to quicinc, update the same for Hemant.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmJ6AVoACgkQVZ8R5v6R
zvW6mAf+J9D7EWR4W8YTJwN3Pdmu0tkeYQXg3ThOrDFLnljBOle0j3wOdHdMRR5t
vzn66NfPJIJkugff0diasE07qRZk3ZV7xw+1IZMnHVNCTj4lOyO12jcz/WVIybjl
6klnm/YEXdmtK5Owt01yNIA1GZYRdfmZw2E2hR6T05Pe/ov2wff/CJ6UcHFrb3Es
0AdxQ/kpMhQvOzv53wB6ZYL611mMJMrDtcGb5pOH0LWJYN8nbhvh5JfULKBuyWCb
NsZschX0veYA82OfxhejOiarO6/qKi6cdIfaqzbx26WxfGV2A4Iiqj5UzhTX3sWO
zl0HyVPKtZIWOm3WvygvXR/1tvdMgg==
=6jsl
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-work-next
Manivannan writes:
MHI changes for v5.19
MHI Host
--------
Support for new modems:
- Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
- Telit FN980 v1 based on SDX55
- Telit FN990 based on SDX65
- Foxconn T99W373/T99W368 based on SDX62/SDX65
Core changes:
- During the recycle of event ring elements, compute the ctxt_wp based on the
local cached value instead of reading from shared memory. This is to prevent
the possible corruption of the ctxt_wp as some of the endpoint devices could
modify the value in shared memory.
- Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
spec allows the host to hard reset the device in the case of an unrecoverable
error and all other reset mechanisms have failed.
- During MHI shutdown, wait for the endpoint device to enter the ready state
post reset before proceeding. This is to avoid a possible race where host
would remove the interrupt handler and device will send ready state
interrupt, resulting in IOMMU fault.
- Bail out updating the MHI register if the read has failed during
read/modify/write.
- Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
register fields in mhi_init_mmio().
MAINTAINERS change:
- Since Qualcomm has moved the email domain for its employess from codeaurora
domain to quicinc, update the same for Hemant.
* tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (29 commits)
bus: mhi: host: Add support for Foxconn T99W373 and T99W368
bus: mhi: host: pci_generic: add Telit FN990
bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
bus: mhi: host: Add support for Cinterion MV32-WA/MV32-WB
bus: mhi: host: Optimize and update MMIO register write method
bus: mhi: host: Bail on writing register fields if read fails
bus: mhi: host: Wait for ready state after reset
bus: mhi: host: Add soc_reset sysfs
bus: mhi: host: pci_generic: Sort mhi_pci_id_table based on the PID
bus: mhi: host: Use cached values for calculating the shared write pointer
MAINTAINERS: Update Hemant's email id
bus: mhi: ep: Add uevent support for module autoloading
bus: mhi: ep: Add support for suspending and resuming channels
bus: mhi: ep: Add support for queueing SKBs to the host
bus: mhi: ep: Add support for processing channel rings
bus: mhi: ep: Add support for reading from the host
bus: mhi: ep: Add support for processing command rings
bus: mhi: ep: Add support for handling SYS_ERR condition
bus: mhi: ep: Add support for handling MHI_RESET
bus: mhi: ep: Add support for powering down the MHI endpoint stack
...
Product's enumeration align with previous Foxconn
SDX55, so T99W373(SDX62)/T99W368(SDX65) would use
the same config as Foxconn SDX55.
Remove fw and edl for this new commit.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20220503024349.4486-1-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
-----BEGIN PGP SIGNATURE-----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=/Dqp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rjVH
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.19
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: pdr: use static for servreg_* variables
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
soc: qcom: socinfo: Sort out 8974PRO names
dt-bindings: soc: qcom,smp2p: convert to dtschema
dt-bindings: qcom: geni-se: Update UART schema reference
dt-bindings: qcom: geni-se: Update I2C schema reference
dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
bus: add driver for initializing the SSC bus on (some) qcom SoCs
dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
dt-bindings: soc: qcom,smd: convert to dtschema
firmware: qcom_scm: Add compatible for MSM8976 SoC
dt-bindings: firmware: qcom-scm: Document msm8976 bindings
soc: qcom: smem: validate fields of shared structures
soc: qcom: smem: map only partitions used by local HOST
...
Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix following coccicheck warning:
./drivers/bus/mhi/host/init.c:89:8-16: WARNING: use scnprintf or sprintf
Use sysfs_emit and sysfs_emit_at instead of snprintf.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220426125902.681258-1-wanjiabing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5.19, please pull the following:
- Qintao adds a missing NULL check to the Broadcom PMB driver after a
memory allocation
- Li removes the redundant suppress_bind_attrs from the brcmstb_gisb
driver which only has a probe and no remove function
-----BEGIN PGP SIGNATURE-----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=DrJC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ycAK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.19/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoCs drivers changes for
5.19, please pull the following:
- Qintao adds a missing NULL check to the Broadcom PMB driver after a
memory allocation
- Li removes the redundant suppress_bind_attrs from the brcmstb_gisb
driver which only has a probe and no remove function
* tag 'arm-soc/for-5.19/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Remove the suppress_bind_attrs attribute of the driver
soc: bcm: Check for NULL return of devm_kzalloc()
Link: https://lore.kernel.org/r/20220504210942.1838248-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge 5.18-rc5 into char-misc-next
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a small number of char/misc/other driver fixes for 5.18-rc5
Nothing major in here, this is mostly IIO driver fixes along with some
other small things:
- at25 driver fix for systems without a dma-able stack
- phy driver fixes for reported issues
- binder driver fixes for reported issues
All of these have been in linux-next without any reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYm1P1Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk13ACfRxwyYbH+qIg1Y1V1185Y6aAlazkAn0SsHVwU
A25QD2cjhLE/Ezby8IM1
=qpPl
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a small number of char/misc/other driver fixes for 5.18-rc5
Nothing major in here, this is mostly IIO driver fixes along with some
other small things:
- at25 driver fix for systems without a dma-able stack
- phy driver fixes for reported issues
- binder driver fixes for reported issues
All of these have been in linux-next without any reported problems"
* tag 'char-misc-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (31 commits)
eeprom: at25: Use DMA safe buffers
binder: Gracefully handle BINDER_TYPE_FDA objects with num_fds=0
binder: Address corner cases in deferred copy and fixup
phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()
iio: imu: inv_icm42600: Fix I2C init possible nack
iio: dac: ltc2688: fix voltage scale read
interconnect: qcom: sdx55: Drop IP0 interconnects
interconnect: qcom: sc7180: Drop IP0 interconnects
phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe
phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe
phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks
bus: mhi: host: pci_generic: Flush recovery worker during freeze
bus: mhi: host: pci_generic: Add missing poweroff() PM callback
phy: ti: tusb1210: Fix an error handling path in tusb1210_probe()
phy: samsung: exynos5250-sata: fix missing device put in probe error paths
phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl()
phy: ti: tusb1210: Make tusb1210_chg_det_states static
iio:dac:ad3552r: Fix an IS_ERR() vs NULL check
iio: sx9324: Fix default precharge internal resistance register
...
The devices on platform/amba/fsl-mc/PCI buses could be bound to drivers
with the device DMA managed by kernel drivers or user-space applications.
Unfortunately, multiple devices may be placed in the same IOMMU group
because they cannot be isolated from each other. The DMA on these devices
must either be entirely under kernel control or userspace control, never
a mixture. Otherwise the driver integrity is not guaranteed because they
could access each other through the peer-to-peer accesses which by-pass
the IOMMU protection.
This checks and sets the default DMA mode during driver binding, and
cleanups during driver unbinding. In the default mode, the device DMA is
managed by the device driver which handles DMA operations through the
kernel DMA APIs (see Documentation/core-api/dma-api.rst).
For cases where the devices are assigned for userspace control through the
userspace driver framework(i.e. VFIO), the drivers(for example, vfio_pci/
vfio_platfrom etc.) may set a new flag (driver_managed_dma) to skip this
default setting in the assumption that the drivers know what they are
doing with the device DMA.
Calling iommu_device_use_default_domain() before {of,acpi}_dma_configure
is currently a problem. As things stand, the IOMMU driver ignored the
initial iommu_probe_device() call when the device was added, since at
that point it had no fwspec yet. In this situation,
{of,acpi}_iommu_configure() are retriggering iommu_probe_device() after
the IOMMU driver has seen the firmware data via .of_xlate to learn that
it actually responsible for the given device. As the result, before
that gets fixed, iommu_use_default_domain() goes at the end, and calls
arch_teardown_dma_ops() if it fails.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220418005000.897664-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit e8604b1447 introduced a call to the helper function
msi_first_desc(), which needs MSI descriptor mutex lock before
call. However, the required mutex lock was not added. This results in
lockdep assertion:
WARNING: CPU: 4 PID: 119 at kernel/irq/msi.c:274 msi_first_desc+0xd0/0x10c
msi_first_desc+0xd0/0x10c
fsl_mc_msi_domain_alloc_irqs+0x7c/0xc0
fsl_mc_populate_irq_pool+0x80/0x3cc
Fix this by adding the mutex lock and unlock around the function call.
Fixes: e8604b1447 ("bus: fsl-mc-msi: Simplify MSI descriptor handling")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220412075636.755454-1-shinichiro.kawasaki@wdc.com
Even if platform_driver does not set suppress_bind_attrs attribute, when
registering with platform_driver_probe, the value of suppress_bind_attrs is
still true, see __platform_driver_probe().
Signed-off-by: lizhe <sensor1010@163.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add uevent support to MHI endpoint bus so that the client drivers can be
autoloaded by udev when the MHI endpoint devices gets created. The client
drivers are expected to provide MODULE_DEVICE_TABLE with the MHI id_table
struct so that the alias can be exported.
The MHI endpoint reused the mhi_device_id structure of the MHI bus.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-19-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for suspending and resuming the channels in MHI endpoint stack.
The channels will be moved to the suspended state during M3 state
transition and will be resumed during M0 transition.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-18-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for queueing SKBs to the host over the transfer ring of the
relevant channel. The mhi_ep_queue_skb() API will be used by the client
networking drivers to queue the SKBs to the host over MHI bus.
The host will add ring elements to the transfer ring periodically for
the device and the device will write SKBs to the ring elements. If a
single SKB doesn't fit in a ring element (TRE), it will be placed in
multiple ring elements and the overflow event will be sent for all ring
elements except the last one. For the last ring element, the EOT event
will be sent indicating the packet boundary.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for processing the channel rings from host. For the channel
ring associated with DL channel, the xfer callback will simply invoked.
For the case of UL channel, the ring elements will be read in a buffer
till the write pointer and later passed to the client driver using the
xfer callback.
The client drivers should provide the callbacks for both UL and DL
channels during registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Data transfer between host and the ep device happens over the transfer
ring associated with each bi-directional channel pair. Host defines the
transfer ring by allocating memory for it. The read and write pointer
addresses of the transfer ring are stored in the channel context.
Once host places the elements in the transfer ring, it increments the
write pointer and rings the channel doorbell. Device will receive the
doorbell interrupt and will process the transfer ring elements.
This commit adds support for reading the transfer ring elements from
the transfer ring till write pointer, incrementing the read pointer and
finally sending the completion event to the host through corresponding
event ring.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-15-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for processing the command rings. Command ring is used by the
host to issue channel specific commands to the ep device. Following
commands are supported:
1. Start channel
2. Stop channel
3. Reset channel
Once the device receives the command doorbell interrupt from host, it
executes the command and generates a command completion event to the
host in the primary event ring.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for handling SYS_ERR (System Error) condition in the MHI
endpoint stack. The SYS_ERR flag will be asserted by the endpoint device
when it detects an internal error. The host will then issue reset and
reinitializes MHI to recover from the error state.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for handling MHI_RESET in MHI endpoint stack. MHI_RESET will
be issued by the host during shutdown and during error scenario so that
it can recover the endpoint device without restarting the whole device.
MHI_RESET handling involves resetting the internal MHI registers, data
structures, state machines, resetting all channels/rings and setting
MHICTRL.RESET bit to 0. Additionally the device will also move to READY
state if the reset was due to SYS_ERR.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for MHI endpoint power_down that includes stopping all
available channels, destroying the channels, resetting the event and
transfer rings and freeing the host cache.
The stack will be powered down whenever the physical bus link goes down.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for MHI endpoint power_up that includes initializing the MMIO
and rings, caching the host MHI registers, and setting the MHI state to M0.
After registering the MHI EP controller, the stack has to be powered up
for usage.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for processing MHI endpoint interrupts such as control
interrupt, command interrupt and channel interrupt from the host.
The interrupts will be generated in the endpoint device whenever host
writes to the corresponding doorbell registers. The doorbell logic
is handled inside the hardware internally.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for managing the MHI state machine by controlling the state
transitions. Only the following MHI state transitions are supported:
1. Ready state
2. M0 state
3. M3 state
4. SYS_ERR state
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for sending the events to the host over MHI bus from the
endpoint. Following events are supported:
1. Transfer completion event
2. Command completion event
3. State change event
4. Execution Environment (EE) change event
An event is sent whenever an operation has been completed in the MHI EP
device. Event is sent using the MHI event ring and additionally the host
is notified using an IRQ if required.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for managing the MHI ring. The MHI ring is a circular queue
of data structures used to pass the information between host and the
endpoint.
MHI support 3 types of rings:
1. Transfer ring
2. Event ring
3. Command ring
All rings reside inside the host memory and the MHI EP device maps it to
the device memory using blocks like PCIe iATU. The mapping is handled in
the MHI EP controller driver itself.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for managing the Memory Mapped Input Output (MMIO) registers
of the MHI bus. All MHI operations are carried out using the MMIO registers
by both host and the endpoint device.
The MMIO registers reside inside the endpoint device memory (fixed
location based on the platform) and the address is passed by the MHI EP
controller driver during its registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for creating and destroying MHI endpoint devices.
The MHI endpoint devices binds to the MHI endpoint channels and are used
to transfer data between MHI host and endpoint device.
There is a single MHI EP device for each channel pair. The devices will be
created when the corresponding channels has been started by the host and
will be destroyed during MHI EP power down and reset.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for registering MHI endpoint client drivers
with the MHI endpoint stack. MHI endpoint client drivers bind to one
or more MHI endpoint devices inorder to send and receive the upper-layer
protocol packets like IP packets, modem control messages, and
diagnostics messages over MHI bus.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for registering MHI endpoint controller drivers
with the MHI endpoint stack. MHI endpoint controller drivers manage
the interaction with the host machines (such as x86). They are also the
MHI endpoint bus master in charge of managing the physical link between
the host and endpoint device. Eventhough the MHI spec is bus agnostic,
the current implementation is entirely based on PCIe bus.
The endpoint controller driver encloses all information about the
underlying physical bus like PCIe. The registration process involves
parsing the channel configuration and allocating an MHI EP device.
Channels used in the endpoint stack follows the perspective of the MHI
host stack. i.e.,
UL - From host to endpoint
DL - From endpoint to host
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code is really spurious.
It always returns an ERR_PTR, even when err is known to be 0 and calls
put_device() after a successful device_register() call.
It is likely that the return statement in the normal path is missing.
Add 'return rdev;' to fix it.
Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr
MV32-WA is designed based on Qualcomm SDX62, and
MV32-WB is designed based on QUalcomm SDX65. Both
products' enumeration would align with previous
product MV31-W.So we merge MV31 and MV32 to MV3X
for some common settings.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220421092141.3984-1-slark_xiao@163.com
[mani: removed the fixes tag that's not needed]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
As of now, MMIO writes done after ready state transition use the
mhi_write_reg_field() API even though the whole register is being
written in most cases. Optimize this process by using mhi_write_reg()
API instead for those writes and use the mhi_write_reg_field()
API for MHI config registers only.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650304226-11080-3-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Helper API to write register fields relies on successful reads
of the register/address prior to the write. Bail out if a failure
is seen when reading the register before the actual write is
performed.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650304226-11080-2-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
After the device has signaled the end of reset by clearing the reset bit,
it will automatically reinit MHI and the internal device structures. Once
That is done, the device will signal it has entered the ready state.
Signaling the ready state involves sending an interrupt (MSI) to the host
which might cause IOMMU faults if it occurs at the wrong time.
If the controller is being powered down, and possibly removed, then the
reset flow would only wait for the end of reset. At which point, the host
and device would start a race. The host may complete its reset work, and
remove the interrupt handler, which would cause the interrupt to be
disabled in the IOMMU. If that occurs before the device signals the ready
state, then the IOMMU will fault since it blocked an interrupt. While
harmless, the fault would appear like a serious issue has occurred so let's
silence it by making sure the device hits the ready state before the host
completes its reset processing.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1650302562-30964-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
