Before this patch, some gfs2 code locked the freeze glock with LM_FLAG_NOEXP
(Do not freeze) flag, and some did not. We never want to freeze the freeze
glock, so this patch makes it consistently use LM_FLAG_NOEXP always.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, the freeze code in gfs2 specified GL_NOCACHE in
several places. That's wrong because we always want to know the state
of whether the file system is frozen.
There was also a problem with freeze/thaw transitioning the glock from
frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX
to processes that request it in SH mode, unless GL_EXACT is specified.
Therefore, the freeze/thaw code, which tried to reacquire the glock in
SH mode would get the glock in EX mode, and miss the transition from EX
to SH. That made it think the thaw had completed normally, but since the
glock was still cached in EX, other nodes could not freeze again.
This patch removes the GL_NOCACHE flag to allow the freeze glock to be
cached. It also adds the GL_EXACT flag so the glock is fully transitioned
from EX to SH, thereby allowing future freeze operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function freeze_go_sync, called when promoting
the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag.
That's only set for read-write mounts. Read-only mounts don't use a
journal, so the bit is never set, so the freeze never happened.
This patch removes the check for SDF_JOURNAL_LIVE for freeze requests
but still checks it when deciding whether to flush a journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.
This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Two critical mm related fixes that affect booting of m68k/ColdFire devices.
Both fix problems caused by recent system init memblock changes.
-----BEGIN PGP SIGNATURE-----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=odtP
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu mm fixes from Greg Ungerer:
"Two critical mm related fixes that affect booting of m68k/ColdFire
devices.
Both fix problems caused by recent system init memblock changes"
* tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: mm: fix node memblock init
m68k: nommu: register start of the memory with memblock
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
warnings
- Various fixes for DT binding check warnings
- A couple of build fixes/improvements for binding checks
- ReST formatting improvements for writing-schema.rst
- Document reference fixes
-----BEGIN PGP SIGNATURE-----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=/l5U
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
warnings
- Various fixes for DT binding check warnings
- A couple of build fixes/improvements for binding checks
- ReST formatting improvements for writing-schema.rst
- Document reference fixes
* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: clock: imx: Fix e-mail address
dt-bindings: thermal: k3: Fix the reg property
dt-bindings: thermal: Remove soc unit address
dt-bindings: display: arm: versatile: Pass the sysreg unit name
dt-bindings: usb: aspeed: Remove the leading zeroes
dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
dt-bindings: mailbox: zynqmp_ipi: fix unit address
dt-bindings: bus: uniphier-system-bus: fix warning in example
scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
doc: devicetree: bindings: fix spelling mistake
docs: dt: minor adjustments at writing-schema.rst
dt: fix reference to olpc,xo1.75-ec.txt
dt: Fix broken references to renamed docs
dt: fix broken links due to txt->yaml renames
dt: update a reference for reneases pcar file renamed to yaml
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXv20ggAKCRCRxhvAZXjc
osYAAQD4Lp5ORPJv5jtYScxRM1RiUh8hp2MBle+4iYCAQX/UowD/QtMPtiLWaMIw
6bMMBAj1gVBmlIOmu7DhBs8hVtKugQY=
=kNpi
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull data race annotation from Christian Brauner:
"This contains an annotation patch for a data race in copy_process()
reported by KCSAN when reading and writing nr_threads.
The data race is intentional and benign. This is obvious from the
comment above the relevant code and based on general consensus when
discussing this issue. So simply using data_race() to annotate this as
an intentional race seems the best option"
* tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fork: annotate data race in copy_process()
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXv4UMCAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0kq/AQDC9w/N2eKgCl1S
uxALoPLsc2W5OITMQP/aDQuayd+hWAEA9WYajToL4wP55q23xS3w1fd70lkX58cH
vbP64TyofgI=
=B4wJ
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"These are just fixes for bugs found lately.
All of them are small scale things here and there, and all of them are
for previous kernel releases (the oldest appeared in v2.6.17)"
* tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm_tis: Remove the HID IFX0102
tpm_tis_spi: Prefer async probe
tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes
tpm/st33zp24: fix spelling mistake "drescription" -> "description"
tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
tpm_tis_spi: Don't send anything during flow control
tpm: Fix TIS locality timeout problems
This kselftest fixes update for Linux 5.8-rc4 consists of tpm test
fixes from arkko Sakkinen.
-----BEGIN PGP SIGNATURE-----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=RDv/
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"tpm test fixes from Jarkko Sakkinen"
* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tpm: Use /bin/sh instead of /bin/bash
selftests: tpm: Use 'test -e' instead of 'test -f'
Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
This kunit fixes update for Linux 5.8-rc4 consists of fixes to build
and run-times failures. Also includes troubleshooting tips updates
to kunit user documentation.
-----BEGIN PGP SIGNATURE-----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=XeG4
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan
"Fixes for build and run-times failures.
Also includes troubleshooting tips updates to kunit user
documentation"
* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Add some troubleshooting tips to the FAQ
kunit: kunit_tool: Fix invalid result when build fails
kunit: show error if kunit results are not present
kunit: kunit_config: Fix parsing of CONFIG options with space
leak and a module unloading bug in the /proc/fs/nfsd/clients/ code, and
a compile warning.
-----BEGIN PGP SIGNATURE-----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=wF3M
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Fixes for a umask bug on exported filesystems lacking ACL support, a
leak and a module unloading bug in the /proc/fs/nfsd/clients/ code,
and a compile warning"
* tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
nfsd: fix nfsdfs inode reference count leak
nfsd4: fix nfsdfs reference count loop
nfsd: apply umask on fs without ACL support
Fix a typo in SENSORS_IR35221 option: module name should be "ir35221"
instead of "ir35521".
Fixes: 8991ebd9c9 ("hwmon: (pmbus) Add client driver for IR35221")
Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Link: https://lore.kernel.org/r/20200702221349.18139-1-rentao.bupt@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-----BEGIN PGP SIGNATURE-----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=4lvI
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"One fix in here, for a regression in 5.7 where a task is waiting in
the kernel for a condition, but that condition won't become true until
task_work is run. And the task_work can't be run exactly because the
task is waiting in the kernel, so we'll never make any progress.
One example of that is registering an eventfd and queueing io_uring
work, and then the task goes and waits in eventfd read with the
expectation that it'll get woken (and read an event) when the io_uring
request completes. The io_uring request is finished through task_work,
which won't get run while the task is looping in eventfd read"
* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
Today xenbus_map_ring_valloc() can return either a negative errno
value (-ENOMEM or -EINVAL) or a grant status value. This is a mess as
e.g -ENOMEM and GNTST_eagain have the same numeric value.
Fix that by turning all grant mapping errors into -ENOENT. This is
no problem as all callers of xenbus_map_ring_valloc() only use the
return value to print an error message, and in case of mapping errors
the grant status value has already been printed by __xenbus_map_ring()
before.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-3-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
xenbus_map_ring_valloc() and its sub-functions are putting quite large
structs and arrays on the stack. This is problematic at runtime, but
might also result in build failures (e.g. with clang due to the option
-Werror,-Wframe-larger-than=... used).
Fix that by moving most of the data from the stack into a dynamically
allocated struct. Performance is no issue here, as
xenbus_map_ring_valloc() is used only when adding a new PV device to
a backend driver.
While at it move some duplicated code from pv/hvm specific mapping
functions to the single caller.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Fix sparse build warning:
block/bio-integrity.c:27:6: warning:
symbol '__bio_integrity_free' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe fixes from Christoph.
* 'nvme-5.8' of git://git.infradead.org/nvme:
nvme: fix a crash in nvme_mpath_add_disk
nvme: fix identify error status silent ignore
Acer C720 running Linux v5.3 reports this in klog:
tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis tpm_tis: Could not get TPM timeouts and durations
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis 00:08: Could not get TPM timeouts and durations
ima: No TPM chip found, activating TPM-bypass!
tpm_inf_pnp 00:08: Found TPM with ID IFX0102
% git --no-pager grep IFX0102 drivers/char/tpm
drivers/char/tpm/tpm_infineon.c: {"IFX0102", 0},
drivers/char/tpm/tpm_tis.c: {"IFX0102", 0}, /* Infineon */
Obviously IFX0102 was added to the HID table for the TCG TIS driver by
mistake.
Fixes: 93e1b7d42e ("[PATCH] tpm: add HID module parameter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877
Cc: stable@vger.kernel.org
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Reported-by: Ferry Toth: <ferry.toth@elsinga.info>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
On a Chromebook I'm working on I noticed a big (~1 second) delay
during bootup where nothing was happening. Right around this big
delay there were messages about the TPM:
[ 2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2
[ 3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ...
I put a few printouts in and saw that tpm_tis_spi_init() (specifically
tpm_chip_register() in that function) was taking the lion's share of
this time, though ~115 ms of the time was in cr50_print_fw_version().
Let's make a one-line change to prefer async probe for tpm_tis_spi.
There's no reason we need to block other drivers from probing while we
load.
NOTES:
* It's possible that other hardware runs through the init sequence
faster than Cr50 and this isn't such a big problem for them.
However, even if they are faster they are still doing _some_
transfers over a SPI bus so this should benefit everyone even if to
a lesser extent.
* It's possible that there are extra delays in the code that could be
optimized out. I didn't dig since once I enabled async probe they
no longer impacted me.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued,
which will need the use of the internal command/response buffer. But,
we're issuing this *before* we've waited to make sure that buffer is
allocated.
This can result in intermittent failures to probe if the hypervisor / TPM
implementation doesn't respond quickly enough. I find it fails almost
every time with an 8 vcpu guest under KVM with software emulated TPM.
To fix it, just move the tpm2_get_cc_attrs_tlb() call after the
existing code to wait for initialization, which will ensure the buffer
is allocated.
Fixes: 18b3670d79 ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Trivial fix, the spelling of "drescription" is incorrect
in function comment.
Fix this.
Signed-off-by: Binbin Zhou <zhoubinbin@uniontech.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
variable dereferenced before check 'chip->ops' (see line 979)
'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
During flow control we are just reading from the TPM, yet our spi_xfer
has the tx_buf and rx_buf both non-NULL which means we're requesting a
full duplex transfer.
SPI is always somewhat of a full duplex protocol anyway and in theory
the other side shouldn't really be looking at what we're sending it
during flow control, but it's still a bit ugly to be sending some
"random" data when we shouldn't.
The default tpm_tis_spi_flow_control() tries to address this by
setting 'phy->iobuf[0] = 0'. This partially avoids the problem of
sending "random" data, but since our tx_buf and rx_buf both point to
the same place I believe there is the potential of us sending the
TPM's previous byte back to it if we hit the retry loop.
Another flow control implementation, cr50_spi_flow_control(), doesn't
address this at all.
Let's clean this up and just make the tx_buf NULL before we call
flow_control(). Not only does this ensure that we're not sending any
"random" bytes but it also possibly could make the SPI controller
behave in a slightly more optimal way.
NOTE: no actual observed problems are fixed by this patch--it's was
just made based on code inspection.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command. This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d124843 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Mario Limonciello <Mario.Limonciello@dell.com>
Tested-by: Alex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When building very large kernels, the logic that emits replacement
sequences for alternatives fails when relative branches are present
in the code that is emitted into the .altinstr_replacement section
and patched in at the original site and fixed up. The reason is that
the linker will insert veneers if relative branches go out of range,
and due to the relative distance of the .altinstr_replacement from
the .text section where its branch targets usually live, veneers
may be emitted at the end of the .altinstr_replacement section, with
the relative branches in the sequence pointed at the veneers instead
of the actual target.
The alternatives patching logic will attempt to fix up the branch to
point to its original target, which will be the veneer in this case,
but given that the patch site is likely to be far away as well, it
will be out of range and so patching will fail. There are other cases
where these veneers are problematic, e.g., when the target of the
branch is in .text while the patch site is in .init.text, in which
case putting the replacement sequence inside .text may not help either.
So let's use subsections to emit the replacement code as closely as
possible to the patch site, to ensure that veneers are only likely to
be emitted if they are required at the patch site as well, in which
case they will be in range for the replacement sequence both before
and after it is transported to the patch site.
This will prevent alternative sequences in non-init code from being
released from memory after boot, but this is tolerable given that the
entire section is only 512 KB on an allyesconfig build (which weighs in
at 500+ MB for the entire Image). Also, note that modules today carry
the replacement sequences in non-init sections as well, and any of
those that target init code will be emitted into init sections after
this change.
This fixes an early crash when booting an allyesconfig kernel on a
system where any of the alternatives sequences containing relative
branches are activated at boot (e.g., ARM64_HAS_PAN on TX2)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave P Martin <dave.martin@arm.com>
Link: https://lore.kernel.org/r/20200630081921.13443-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.
Fixes: b2ce4d9069 ("nvme-multipath: set bdi capabilities once")
Reported-by: Avinash M N <Avinash.M.N@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Commit 59c7c3caaa intended to only silently ignore non retry-able
errors (DNR bit set) such that we can still identify misbehaving
controllers, and in the other hand propagate retry-able errors (DNR bit
cleared) so we don't wrongly abandon a namespace just because it happens
to be temporarily inaccessible.
The goal remains the same as the original commit where this was
introduced but unfortunately had the logic backwards.
Fixes: 59c7c3caaa ("nvme: fix possible hang when ns scanning fails during error recovery")
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The wait_event_... defines evaluate to long so we should not assign it an int as this may truncate
the value.
Reported-by: Marshall Midden <marshallmidden@gmail.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When xfstest generic/035, we found the target file was deleted
if the rename return -EACESS.
In cifs_rename2, we unlink the positive target dentry if rename
failed with EACESS or EEXIST, even if the target dentry is positived
before rename. Then the existing file was deleted.
We should just delete the target file which created during the
rename.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
The flag from the primary tcon needs to be copied into the volume info
so that cifs_get_tcon will try to enable extensions on the per-user
tcon. At that point, since posix extensions must have already been
enabled on the superblock, don't try to needlessly adjust the mount
flags.
Fixes: ce558b0e17 ("smb3: Add posix create context for smb3.11 posix mounts")
Fixes: b326614ea2 ("smb3: allow "posix" mount option to enable new SMB311 protocol extensions")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Fixes: ca567eb2b3 ("SMB3: Allow persistent handle timeout to be configurable on mount")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Without this:
- persistent handles will only be enabled for per-user tcons if the
server advertises the 'Continuous Availabity' capability
- resilient handles would never be enabled for per-user tcons
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Ensure multiuser SMB3 mounts use encryption for all users' tcons if the
mount options are configured to require encryption. Without this, only
the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user
tcons would only be encrypted if the server was configured to require
encryption.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This is useful for distinguishing SMB sessions on a multiuser mount.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl78z3sTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXgvYB/j68NUgtrRt9jG+ggn57QvYmctycX1O
xpkSTf20jpxMIWWuBST+lceGnvlCaS1u2G3GaIvas7M34NzxU3I/bxRZgrsCHARY
tyu6eetLG8qGixipNJ1KGznyakQlP+vLEdgns0xMGMFqKA+Q5lUsF5Ypon1c2c93
5i10eEA1TM4w1VSR+ByE+syM+GtFZJqVBS+LOJP3wJUqxk46ItTDuIgz3sWZaiqX
fjXt2wqqiQEJel4Mx5aHhFwRxmHu09QnTBZYrbgtbN+jeGBQaPCPMo31vu6YmYXr
ekohrdfvO+cLSR/nihPv4wbF7lPUaRq+IFlRtjIYo6t5VfRHXJq/2Zs=
=DqIR
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Joseph to make panic reporting contain more useful
information"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Change flag to write log level in panic msg to false
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Programs added 'userprogs' should be compiled for the target
architecture i.e. the same architecture as the kernel.
GCC does this correctly since the target architecture is implied
by the toolchain prefix.
Clang builds userspace programs always for the host architecture
because the target triple is currently missing.
Fix this.
Fixes: 7f3a59db27 ("kbuild: add infrastructure to build userspace programs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
scripts/cc-can-link.sh tests if the compiler can link userspace
programs.
When $(CC) is GCC, it is checked against the target architecture
because the toolchain prefix is specified as a part of $(CC).
When $(CC) is Clang, it is checked against the host architecture
because --target option is missing.
Pass $(CLANG_FLAGS) to scripts/cc-can-link.sh to evaluate the link
capability for the target architecture.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
There are 3 types that are not parsed by the debug info logic.
Add support for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Instead of just changing the helper window to show a
dependency, also navigate to it at the config and menu
widgets.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
the goback button does nothing on splitMode. So, why display
it?
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The goBack() logic is used only for the configList, as
it only makes sense on singleMode. So, let's simplify the
code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
