mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
2e7451fb57
1084588 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Anup Patel
|
2e7451fb57
|
RISC-V: Enable profiling by default
Let us enable profiling by default in RV32 and RV64 defconfigs so that we can use RISC-V PMU drivers on various RISC-V platforms. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Wu Caize
|
617487600b
|
RISC-V: module: fix apply_r_riscv_rcv_branch_rela typo
This function name was spelled incorrectly, likely to do a typo. Signed-off-by: Wu Caize <zepan@sipeed.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Atish Patra
|
f1de125766
|
RISC-V: Declare per cpu boot data as static
The per cpu boot data is only used within the cpu_ops_sbi.c. It can
be delcared as static.
Fixes:
|
||
Atish Patra
|
8a122a66c7
|
RISC-V: Fix a comment typo in riscv_of_parent_hartid()
This fixes a typo in a comment that is both obvious and went unnoticed.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Fixes:
|
||
Dmitry Vyukov
|
b81d591386
|
riscv: Increase stack size under KASAN
KASAN requires more stack space because of compiler instrumentation.
Increase stack size as other arches do.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+0600986d88e2d4d7ebb8@syzkaller.appspotmail.com
Fixes:
|
||
Nikita Shubin
|
2b2b574ac5
|
riscv: Fix fill_callchain return value
perf_callchain_store return 0 on success, -1 otherwise,
fix fill_callchain to return correct bool value.
Fixes:
|
||
Niklas Cassel
|
6846d65610
|
riscv: dts: canaan: Fix SPI3 bus width
According to the K210 Standalone SDK Programming guide: https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf Section 15.4.3.3: SPI0 and SPI1 supports: standard, dual, quad and octal transfers. SPI3 supports: standard, dual and quad transfers (octal is not supported). In order to support quad transfers (Quad SPI), SPI3 must have four IO wires connected to the SPI flash. Update the device tree to specify the correct bus width. Tested on maix bit, maix dock and maixduino, which all have the same SPI flash (gd25lq128d) connected to SPI3. maix go is untested, but it would not make sense for this k210 board to be designed differently. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Fixes: |
||
Palmer Dabbelt
|
bee7fbc385
|
RISC-V CPU Idle Support
This series adds RISC-V CPU Idle support using SBI HSM suspend function. The RISC-V SBI CPU idle driver added by this series is highly inspired from the ARM PSCI CPU idle driver. Special thanks Sandeep Tripathy for providing early feeback on SBI HSM support in all above projects (RISC-V SBI specification, OpenSBI, and Linux RISC-V). * palmer/riscv-idle: RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine dt-bindings: Add common bindings for ARM and RISC-V idle states cpuidle: Add RISC-V SBI CPU idle driver cpuidle: Factor-out power domain related code from PSCI domain driver RISC-V: Add SBI HSM suspend related defines RISC-V: Add arch functions for non-retentive suspend entry/exit RISC-V: Rename relocate() and make it global RISC-V: Enable CPU_IDLE drivers |
||
Kees Cook
|
fdecfea093
|
riscv: Rename "sp_in_global" to "current_stack_pointer"
To follow the existing per-arch conventions, rename "sp_in_global" to "current_stack_pointer". This will let it be used in non-arch places (like HARDENED_USERCOPY). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Fangrui Song
|
60210a3d86
|
riscv module: remove (NOLOAD)
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt, .got, and .got.plt sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error (later changed to a warning). Just remove (NOLOAD) to
fix the warning.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Link: https://github.com/ClangBuiltLinux/linux/issues/1597
Fixes:
|
||
Linus Torvalds
|
aa5b537b0e |
RISC-V Patches for the 5.18 Merge Window, Part 1
* Support for Sv57-based virtual memory. * Various improvements for the MicroChip PolarFire SOC and the associated Icicle dev board, which should allow upstream kernels to boot without any additional modifications. * An improved memmove() implementation. * Support for the new Ssconfpmf and SBI PMU extensions, which allows for a much more useful perf implementation on RISC-V systems. * Support for restartable sequences. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmI96FcTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiQBFD/425+6xmoOru6Wiki3Ja0fqQToNrQyW IbmE/8AxUP7UxMvJSNzvQm8deXgklzvmegXCtnjwZZins971vMzzDSI83k/zn8I7 m5thVC9z01BjodV+pvIp/44hS6FesolOLzkVHksX0Zh6h0iidrc34Qf5HrqvvNfN CZ/4K1+E9ig5r9qZp4WdvocCXj+FzwF/30GjKoW9vwA599CEG/dCo+TNN9GKD6XS k+xiUGwlIRA+kCLSPFCi7ev9XPr1tCmQB7uB8Igcvr7Y3mWl8HKfajQVXBnXNRC3 ifbDxpx1elJiLPyf7Rza8jIDwDhLQdxBiwPgDgP9h9R4x0uF4efq8PzLzFlFmaE+ 9Z9thfykBb5dXYDFDje9bAOXvKnGk7Iqxdsz0qWo/ChEQawX1+11bJb0TNN8QTT9 YvlQfUXgb1dmEcj5yG2uVE1Y8L7YNLRMsZU3W3FbmPJZoavSOuU4x0yCGeLyv597 76af3nuBJ5v80Db97gu6St+HIACeevKflsZUf/8GS/p7d1DlvmrWzQUMEycxPTG9 UZpZak58jh7AqQ9JbLnavhwmeacY50vpZOw6QHGAHSN+8daCPlOHDG7Ver7Z+kNj +srJ7iKMvLnnaEjGNgavfxdqTOme1gv4LWs/JdHYMkpphqVN92xBDJnhXTPRVZiQ 0x39vK86qtB46A== =Omc6 -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for Sv57-based virtual memory. - Various improvements for the MicroChip PolarFire SOC and the associated Icicle dev board, which should allow upstream kernels to boot without any additional modifications. - An improved memmove() implementation. - Support for the new Ssconfpmf and SBI PMU extensions, which allows for a much more useful perf implementation on RISC-V systems. - Support for restartable sequences. * tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits) rseq/selftests: Add support for RISC-V RISC-V: Add support for restartable sequence MAINTAINERS: Add entry for RISC-V PMU drivers Documentation: riscv: Remove the old documentation RISC-V: Add sscofpmf extension support RISC-V: Add perf platform driver based on SBI PMU extension RISC-V: Add RISC-V SBI PMU extension definitions RISC-V: Add a simple platform driver for RISC-V legacy perf RISC-V: Add a perf core library for pmu drivers RISC-V: Add CSR encodings for all HPMCOUNTERS RISC-V: Remove the current perf implementation RISC-V: Improve /proc/cpuinfo output for ISA extensions RISC-V: Do no continue isa string parsing without correct XLEN RISC-V: Implement multi-letter ISA extension probing framework RISC-V: Extract multi-letter extension names from "riscv, isa" RISC-V: Minimal parser for "riscv, isa" strings RISC-V: Correctly print supported extensions riscv: Fixed misaligned memory access. Fixed pointer comparison. MAINTAINERS: update riscv/microchip entry riscv: dts: microchip: add new peripherals to icicle kit device tree ... |
||
Linus Torvalds
|
d710d370c4 |
s390 updates for the 5.18 merge window
- Raise minimum supported machine generation to z10, which comes with various cleanups and code simplifications (usercopy/spectre mitigation/etc). - Rework extables and get rid of anonymous out-of-line fixups. - Page table helpers cleanup. Add set_pXd()/set_pte() helper functions. Covert pte_val()/pXd_val() macros to functions. - Optimize kretprobe handling by avoiding extra kprobe on __kretprobe_trampoline. - Add support for CEX8 crypto cards. - Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans. - Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT group sections which simplifies kpatch support. - Always use the packed stack layout and extend kernel unwinder tests. - Add sanity checks for ftrace code patching. - Add s390dbf debug log for the vfio_ap device driver. - Various virtual vs physical address confusion fixes. - Various small fixes and improvements all over the code. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmI94dsACgkQjYWKoQLX FBiaCggAm9xYJ06Qt9c+T9B7aA4Lt50w7Bnxqx1/Q7UHQQgDpkNhKzI1kt/xeKY4 JgZQ9lJC4YRLlyfIVzffLI2DWGbl8BcTpuRWVLhPI5D2yHZBXr2ARe7IGFJueddy MVqU/r+U3H0r3obQeUc4TSrHtSRX7eQZWIoVuDU75b9fCniee/bmGZqs6yXPXXh4 pTZQ/gsIhF/o6eBJLEXLjUAcIasxCk15GXWXmkaSwKHAhfYiintwGmtKqQ8etCvw 17vdlTjA4ce+3ooD/hXGPa8TqeiGKsIB2Xr89x/48f1eJyp2zPJZ1ZvAUBHJBCNt b4sF4ql8303Lj7Be+LeqdlbXfa5PZg== =meZf -----END PGP SIGNATURE----- Merge tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Raise minimum supported machine generation to z10, which comes with various cleanups and code simplifications (usercopy/spectre mitigation/etc). - Rework extables and get rid of anonymous out-of-line fixups. - Page table helpers cleanup. Add set_pXd()/set_pte() helper functions. Covert pte_val()/pXd_val() macros to functions. - Optimize kretprobe handling by avoiding extra kprobe on __kretprobe_trampoline. - Add support for CEX8 crypto cards. - Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans. - Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT group sections which simplifies kpatch support. - Always use the packed stack layout and extend kernel unwinder tests. - Add sanity checks for ftrace code patching. - Add s390dbf debug log for the vfio_ap device driver. - Various virtual vs physical address confusion fixes. - Various small fixes and improvements all over the code. * tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits) s390/test_unwind: add kretprobe tests s390/kprobes: Avoid additional kprobe in kretprobe handling s390: convert ".insn" encoding to instruction names s390: assume stckf is always present s390/nospec: move to single register thunks s390: raise minimum supported machine generation to z10 s390/uaccess: Add copy_from/to_user_key functions s390/nospec: align and size extern thunks s390/nospec: add an option to use thunk-extern s390/nospec: generate single register thunks if possible s390/pci: make zpci_set_irq()/zpci_clear_irq() static s390: remove unused expoline to BC instructions s390/irq: use assignment instead of cast s390/traps: get rid of magic cast for per code s390/traps: get rid of magic cast for program interruption code s390/signal: fix typo in comments s390/asm-offsets: remove unused defines s390/test_unwind: avoid build warning with W=1 s390: remove .fixup section s390/bpf: encode register within extable entry ... |
||
Linus Torvalds
|
744465da70 |
Xtensa updates for v5.18
- remove dependency on the compiler's libgcc - allow selection of internal kernel ABI via Kconfig - enable compiler plugins support for gcc-12 or newer - various minor cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmI94NwTHGpjbXZia2Jj QGdtYWlsLmNvbQAKCRBR+cyR+D+gRK+fD/4pAT0LLsDYi3mh7mkyUPZhMAtYLIIk /pQy2+DbBttGFCWIx0YsLbgxcbzDG2zbkGN3q+wi+1eGLn5TySudd7GOvJ5T4eBb A3a4mH31TPihCnusXVfY580pfJrJq8y10fa2FBm8n/NglVsRN6SZykQcelqjXObn jxvZYmiZPbVP3+w/9iHA+KaSovpeQTKFZ7p7lmUnd6GexnlNy/as3laiWDMB7IJ5 hb2baKeKoDpWtHuvHlUsMaKOTw7o4L+jNUDrRM6S72diu0FkGqXreGPjn56TffdP p3L7u0DeaO6rV6j4lgylHDYASsZXShhq6b/bBm3FQP9hAZVN1SIgNYjl+xLplJ3D uXV+04hFpRBVpbbCnFJvyuTbtzD5LazuGPv68EjbK9+qE0NcyVS3xbu/MvemXXqx XCEoz+yWFJCcAMCDJ1WXlNLP2GsrMccJxDhRbFelk0/KPNl4VG9hQvxOqjh1uJe2 vD/xS/DNwiHaKwqU9+XPu6t5QmjlvxqkUwDs+VbU1P8jzU3dptnaJTQlFp7SACEJ +URWDKiyeho84fqd6FKH+/ULkisuuMZqFWQ+heIkQf8sYCBy8kWNpbg6yPYFciIv x0qvMViuSeY3eWlWJi4ELDu6DCCa2sg9bTGuVfH8p3pfK6KwWOvpX6oaq+ZR9cKt bpxpQvOh/vgaOA== =LW3T -----END PGP SIGNATURE----- Merge tag 'xtensa-20220325' of https://github.com/jcmvbkbc/linux-xtensa Pull Xtensa updates from Max Filippov: - remove dependency on the compiler's libgcc - allow selection of internal kernel ABI via Kconfig - enable compiler plugins support for gcc-12 or newer - various minor cleanups and fixes * tag 'xtensa-20220325' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: define update_mmu_tlb function xtensa: fix xtensa_wsr always writing 0 xtensa: enable plugin support xtensa: clean up kernel exit assembly code xtensa: rearrange NMI exit path xtensa: merge stack alignment definitions xtensa: fix DTC warning unit_address_format xtensa: fix stop_machine_cpuslocked call in patch_text xtensa: make secondary reset vector support conditional xtensa: add kernel ABI selection to Kconfig xtensa: don't link with libgcc xtensa: add helpers for division, remainder and shifts xtensa: add missing XCHAL_HAVE_WINDOWED check xtensa: use XCHAL_NUM_AREGS as pt_regs::areg size xtensa: rename PT_SIZE to PT_KERNEL_SIZE xtensa: Remove unused early_read_config_byte() et al declarations xtensa: use strscpy to copy strings net: xtensa: use strscpy to copy strings |
||
Linus Torvalds
|
1f1c153e40 |
powerpc updates for 5.18
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603. - Add support for livepatch to 32-bit. - Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS. - Merge vdso64 and vdso32 into a single directory. - Fix build errors with newer binutils. - Add support for UADDR64 relocations, which are emitted by some toolchains. This allows powerpc to build with the latest lld. - Fix (another) potential userspace r13 corruption in transactional memory handling. - Cleanups of function descriptor handling & related fixes to LKDTM. Thanks to: Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET, Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar, Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek, Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding, Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean, Wedson Almeida Filho, YueHaibing. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmI9TtQTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLp2D/0dwoliEJubRCfoawYUGhxTRZuo6ZYw EQzprOiFA/MtrZyPfbrX/FwxeeetzQWysaw2r5JAuQwx5Jb7Od9dNIrVmueFEktC hD4fkO8YT+QuOD3Xhp/rDQTImdw4fkeofIjnWIqEAtz0XGInmiRQKOnojVe/Po7f 72Yi1u80LxYBAnkN/Hhpmi/BsVmu0Nh3wELu+JZopQXjINj4RyD49ayCBSLbmiNc uo7oYzJ0/WsZHNTpX9kAzzCq+XmI3dKZPyf2AOCvoRxJTmUPCRZF9QCwsmQFikiI vZOdz4fI5e+C0aYJj8ODmWMrXiS+JUQdEShjGg9t9K6EN8idC8joKWpAuXjTA9KN kRjzXX7AvjxaMEGbLe8gjU0PmEjY3eSzMOy15Oc/C0DRRswXRzrXdx2AF+/J6bQb MWMM4aCKfcYs5/TENkEnV0xpbOCOy4ikHM1KZbxvVrShvjSlNIL9XTOnl/pNK5BJ XSSI2mfnjKkbI1+l0KQ4NBXIRTo6HLpu5jwY3Xh97Tq7kaEfqDbO5p2P2HoOCiLa ZjdzmpP99zM6wnqUSj+lyvjob7btyhoq6TKmPtxfKbR6OaSfRJ760BCJ5y15Y9Hc rHey4Y/NL7LqsVYFZxi4/T6Ncq1hNeYr2Fiis4gH+/1zjr6Cd4othnvw3Slaxhst AaHpN3pyx1QI6g== =8r2c -----END PGP SIGNATURE----- Merge tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Livepatch support for 32-bit is probably the standout new feature, otherwise mostly just lots of bits and pieces all over the board. There's a series of commits cleaning up function descriptor handling, which touches a few other arches as well as LKDTM. It has acks from Arnd, Kees and Helge. Summary: - Enforce kernel RO, and implement STRICT_MODULE_RWX for 603. - Add support for livepatch to 32-bit. - Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS. - Merge vdso64 and vdso32 into a single directory. - Fix build errors with newer binutils. - Add support for UADDR64 relocations, which are emitted by some toolchains. This allows powerpc to build with the latest lld. - Fix (another) potential userspace r13 corruption in transactional memory handling. - Cleanups of function descriptor handling & related fixes to LKDTM. Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET, Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar, Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek, Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding, Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean, Wedson Almeida Filho, and YueHaibing" * tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc/pseries: Fix use after free in remove_phb_dynamic() powerpc/time: improve decrementer clockevent processing powerpc/time: Fix KVM host re-arming a timer beyond decrementer range powerpc/tm: Fix more userspace r13 corruption powerpc/xive: fix return value of __setup handler powerpc/64: Add UADDR64 relocation support powerpc: 8xx: fix a return value error in mpc8xx_pic_init powerpc/ps3: remove unneeded semicolons powerpc/64: Force inlining of prevent_user_access() and set_kuap() powerpc/bitops: Force inlining of fls() powerpc: declare unmodified attribute_group usages const powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n powerpc/secvar: fix refcount leak in format_show() powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E powerpc: Move C prototypes out of asm-prototypes.h powerpc/kexec: Declare kexec_paca static powerpc/smp: Declare current_set static powerpc: Cleanup asm-prototypes.c powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S ... |
||
Linus Torvalds
|
9a8b3d5f71 |
- added support for QCN550x (ath79)
- enabled KCSAN - removed TX39XX support - various cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmI91VkaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBFDQ/9FA6rU1FgoHbwBPDUSWdq sdUwm4ndfzPa1zm9vH0jl9ZGEeDJq9f/ntmdouvnW4YIpUYcRx+BhRN/m0W84Pm5 WDvL6FxsWnwgeugbpCKiTE+fJR1febEehyTWxDX3qoQPh1DabnGlHSQUhYhZPwD+ 1ZaGMuWfKdstwR5dYiHLR1BGqunuc/ENoqYrwY+bDvjTL5VL6ZPB1D2JEIZGmmCl d4/DvbXSHcXCY5JGu6Il9SjI5o8LpDJx7IueAxiiLn0m/MoZ7Bt7OHyOYZgMaJob XYUG8UipREGZaOy4DMy1DRgXBVGSEOr/3oWIFJWFzDxw7J99TWvy+lkMdNiiW/lO QRt/2hb1Rfa1LinpbF+ac1hhj+SMI8T+tuMaiv4oG8/qwttMssMoLQN5h+f2fJf+ QkGVEMkvpi/xWkjZ3sQj9SCMKDpBG7az7fleRowX1ahCRApGUkw2pPdl5bt75kpv Qx5J1fpmofzPW63NHRjsvjEq7Z9BhDf/O0aZnAEnmIhw44sM9zpoorQcvvIUYBzr zLPzOCIegJISNiV28oinov1CrwaR/ZF3y4HabbsrAs9VxBBUOjJIERbkB7KKvjYG GN30xtoX3tjNfeIy98kyWm4m0lvc4+eCdUIHbCsEnEAmgMEbRpxZXCBlVF5Ulh2q eaEO9aRVCz1wGY1DW7HVRLc= =xFZN -----END PGP SIGNATURE----- Merge tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for QCN550x (ath79) - enabled KCSAN - removed TX39XX support - various cleanups and fixes * tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (31 commits) MIPS: Fix build error for loongson64 and sgi-ip27 MIPS: ingenic: correct unit node address MIPS: Fix wrong comments in asm/prom.h MIPS: Remove redundant definitions of device_tree_init() MIPS: Remove redundant check in device_tree_init() MIPS: pgalloc: fix memory leak caused by pgd_free() MIPS: RB532: fix return value of __setup handler MIPS: Only use current_stack_pointer on GCC MIPS: boot/compressed: Use array reference for image bounds mips: cdmm: Fix refcount leak in mips_cdmm_phys_base mips: remove reference to "newer Loongson-3" mips: Always permit to build u-boot images MIPS: Sanitise Cavium switch cases in TLB handler synthesizers DEC: Limit PMAX memory probing to R3k systems mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n MIPS: fix fortify panic when copying asm exception handlers mips: ralink: fix a refcount leak in ill_acc_of_setup() mips: Implement "current_stack_pointer" MIPS: Remove TX39XX support MIPS: Modernize READ_IMPLIES_EXEC ... |
||
Linus Torvalds
|
34af78c4e6 |
IOMMU Updates for Linux v5.18
Including: - IOMMU Core changes: - Removal of aux domain related code as it is basically dead and will be replaced by iommu-fd framework - Split of iommu_ops to carry domain-specific call-backs separatly - Cleanup to remove useless ops->capable implementations - Improve 32-bit free space estimate in iova allocator - Intel VT-d updates: - Various cleanups of the driver - Support for ATS of SoC-integrated devices listed in ACPI/SATC table - ARM SMMU updates: - Fix SMMUv3 soft lockup during continuous stream of events - Fix error path for Qualcomm SMMU probe() - Rework SMMU IRQ setup to prepare the ground for PMU support - Minor cleanups and refactoring - AMD IOMMU driver: - Some minor cleanups and error-handling fixes - Rockchip IOMMU driver: - Use standard driver registration - MSM IOMMU driver: - Minor cleanup and change to standard driver registration - Mediatek IOMMU driver: - Fixes for IOTLB flushing logic -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmI8OUkACgkQK/BELZcB GuNz9xAAvlgEg3byMx1y6LY9IctVGyLsegweVGM4+m6XR7qvT5Llc1E2Yw4Gooe4 EAceOihDKW2T9VnMlz9g/cG7Modrx60chcB22KKfxDXPl6yF3R89EMd7DE43T6n/ KPrP9+EsBnI8QSXyYu9ZowioX4CYwWhWD0dKHKAwDvw0BWHHUJ4hTaoHqEoIqLdP vubeHziIok/g1sylSpJjTzV7r/Na8Q3TGcb/Mi5qC8uiyiyx40vtaduMGNW+/ToN EqOKszxPmHfHv/xf0IHo0eUZ2L/JAe0mAlZzOb09f5F2sXJrbC05jlmRaDmSjT+u iEc1r2By/0xo6iOuQC3wD6kTvwwO/ecpNYGhXYXdTbtLquYfL5PSXjRHEU9gf2BO i/llPDsnytPvm/hnmbi26ChNR6yrDPz5bkoCUl5mnB1jZcaZtIURN7cRlEPPZUWo 62VDNdqWDB6AvALc1/SwYdJX/i5eaBf+niS7/BJ/IkLp2oJxFzrGsU8SRJFHNYsa zdFIUUoTw647Ul6derSpGzHow169/RwVKYPiXMsaA8/viPNjpBOtfg56abn1WLW6 N4CtwNu6tt+sPfftFdFx2cDEMW2zpWg5doMddBfEx9FAk0HJ4WLZiTpaO2PxcLyd kCAsGHj+ViAZHINVKFV4nQN/V9yQtcIc4UPmSGJBtKCK3KUYujw= =bcqr -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - IOMMU Core changes: - Removal of aux domain related code as it is basically dead and will be replaced by iommu-fd framework - Split of iommu_ops to carry domain-specific call-backs separatly - Cleanup to remove useless ops->capable implementations - Improve 32-bit free space estimate in iova allocator - Intel VT-d updates: - Various cleanups of the driver - Support for ATS of SoC-integrated devices listed in ACPI/SATC table - ARM SMMU updates: - Fix SMMUv3 soft lockup during continuous stream of events - Fix error path for Qualcomm SMMU probe() - Rework SMMU IRQ setup to prepare the ground for PMU support - Minor cleanups and refactoring - AMD IOMMU driver: - Some minor cleanups and error-handling fixes - Rockchip IOMMU driver: - Use standard driver registration - MSM IOMMU driver: - Minor cleanup and change to standard driver registration - Mediatek IOMMU driver: - Fixes for IOTLB flushing logic * tag 'iommu-updates-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (47 commits) iommu/amd: Improve amd_iommu_v2_exit() iommu/amd: Remove unused struct fault.devid iommu/amd: Clean up function declarations iommu/amd: Call memunmap in error path iommu/arm-smmu: Account for PMU interrupts iommu/vt-d: Enable ATS for the devices in SATC table iommu/vt-d: Remove unused function intel_svm_capable() iommu/vt-d: Add missing "__init" for rmrr_sanity_check() iommu/vt-d: Move intel_iommu_ops to header file iommu/vt-d: Fix indentation of goto labels iommu/vt-d: Remove unnecessary prototypes iommu/vt-d: Remove unnecessary includes iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO iommu/vt-d: Remove domain and devinfo mempool iommu/vt-d: Remove iova_cache_get/put() iommu/vt-d: Remove finding domain in dmar_insert_one_dev_info() iommu/vt-d: Remove intel_iommu::domains iommu/mediatek: Always tlb_flush_all when each PM resume iommu/mediatek: Add tlb_lock in tlb_flush_all iommu/mediatek: Remove the power status checking in tlb flush all ... |
||
Linus Torvalds
|
6f2689a766 |
SCSI misc on 20220324
This series consists of the usual driver updates (qla2xxx, pm8001, libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates and bug fixes. The high blast radius core update is the removal of write same, which affects block and several non-SCSI devices. The other big change, which is more local, is the removal of the SCSI pointer. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV 6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J Ec1HDuUCE18H1H2QAh0= =/Ty9 -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (qla2xxx, pm8001, libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates and bug fixes. The high blast radius core update is the removal of write same, which affects block and several non-SCSI devices. The other big change, which is more local, is the removal of the SCSI pointer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits) scsi: scsi_ioctl: Drop needless assignment in sg_io() scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn() scsi: lpfc: Copyright updates for 14.2.0.0 patches scsi: lpfc: Update lpfc version to 14.2.0.0 scsi: lpfc: SLI path split: Refactor BSG paths scsi: lpfc: SLI path split: Refactor Abort paths scsi: lpfc: SLI path split: Refactor SCSI paths scsi: lpfc: SLI path split: Refactor CT paths scsi: lpfc: SLI path split: Refactor misc ELS paths scsi: lpfc: SLI path split: Refactor VMID paths scsi: lpfc: SLI path split: Refactor FDISC paths scsi: lpfc: SLI path split: Refactor LS_RJT paths scsi: lpfc: SLI path split: Refactor LS_ACC paths scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4 scsi: lpfc: SLI path split: Refactor lpfc_iocbq scsi: lpfc: Use kcalloc() ... |
||
Linus Torvalds
|
b1f8ccdaae |
- Significant refactoring and fixing of how DM core does bio-based IO
accounting with focus on fixing wildly inaccurate IO stats for dm-crypt (and other DM targets that defer bio submission in their own workqueues). End result is proper IO accounting, made possible by targets being updated to use the new dm_submit_bio_remap() interface. - Add hipri bio polling support (REQ_POLLED) to bio-based DM. - Reduce dm_io and dm_target_io structs so that a single dm_io (which contains dm_target_io and first clone bio) weighs in at 256 bytes. For reference the bio struct is 128 bytes. - Various other small cleanups, fixes or improvements in DM core and targets. - Update MAINTAINERS with my kernel.org email address to allow distinction between my "upstream" and "Red" Hats. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmI7ghIACgkQxSPxCi2d A1q04wgAzaRu186WjfCO8MK0uyv3S52Rw1EsgYealAqoPwQJ9KkW2icvjtwRL+fJ 1+w6qE/Da6QdwXj9lGtp1XIXJFipNJSw3PSaE/tV2cXiBemZlzJ5vR6F6dfeYKmV /sGas46H2l+aD4Xr7unUmcN/AYrNIFtnucClY3+DlJFPesXQQc9a/XmL9RX9MrN4 MS9wLkh/5QSG3zReEct/4GVmNSJAjFfLkkeFHtLN82jvvDmnszRT5+aJ06WkXeOz OZmQfOPnJv5MnFUz9DOaRb/fTCoyxzxLnNM5Lt3jyFPk9Jf8Qz9TJ2rgskxsE83u UsCD/Y/QAdDcrRVB5SS6+yx4AS6uSA== =cinj -----END PGP SIGNATURE----- Merge tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Significant refactoring and fixing of how DM core does bio-based IO accounting with focus on fixing wildly inaccurate IO stats for dm-crypt (and other DM targets that defer bio submission in their own workqueues). End result is proper IO accounting, made possible by targets being updated to use the new dm_submit_bio_remap() interface. - Add hipri bio polling support (REQ_POLLED) to bio-based DM. - Reduce dm_io and dm_target_io structs so that a single dm_io (which contains dm_target_io and first clone bio) weighs in at 256 bytes. For reference the bio struct is 128 bytes. - Various other small cleanups, fixes or improvements in DM core and targets. - Update MAINTAINERS with my kernel.org email address to allow distinction between my "upstream" and "Red" Hats. * tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (46 commits) dm: consolidate spinlocks in dm_io struct dm: reduce size of dm_io and dm_target_io structs dm: switch dm_target_io booleans over to proper flags dm: switch dm_io booleans over to proper flags dm: update email address in MAINTAINERS dm: return void from __send_empty_flush dm: factor out dm_io_complete dm cache: use dm_submit_bio_remap dm: simplify dm_sumbit_bio_remap interface dm thin: use dm_submit_bio_remap dm: add WARN_ON_ONCE to dm_submit_bio_remap dm: support bio polling block: add ->poll_bio to block_device_operations dm mpath: use DMINFO instead of printk with KERN_INFO dm: stop using bdevname dm-zoned: remove the ->name field in struct dmz_dev dm: remove unnecessary local variables in __bind dm: requeue IO if mapping table not yet available dm io: remove stale comment block for dm_io() dm thin metadata: remove unused dm_thin_remove_block and __remove ... |
||
Linus Torvalds
|
2dacc1e57b |
v5.18 merge window pull request
Patchces for the merge window: - Minor bug fixes in mlx5, mthca, pvrdma, rtrs, mlx4, hfi1, hns - Minor cleanups: coding style, useless includes and documentation - Reorganize how multicast processing works in rxe - Replace a red/black tree with xarray in rxe which improves performance - DSCP support and HW address handle re-use in irdma - Simplify the mailbox command handling in hns - Simplify iser now that FMR is eliminated -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmI7d8gACgkQOG33FX4g mxq9TRAAm/3rEBtDyVan4Dm3mzq8xeJOTdYtQ29QNWZcwvhStNTo4c29jQJITZ9X Xd+m8VEPWzjkkZ4+hDFM9HhWjOzqDcCCFcbF88WDO0+P1M3HYYUE6AbIcSilAaT2 GIby3+kAnsTOAryrSzHLehYJKUYJuw5NRGsVAPY3r6hz3UECjNb/X1KTWhXaIfNy 2OTqFx5wMQ6hZO8e4a2Wz4bBYAYm95UfK+TgfRqUwhDLCDnkDELvHMPh9pXxJecG xzVg7W7Nv+6GWpUrqtM6W6YpriyjUOfbrtCJmBV3T/EdpiD6lZhKpkX23aLgu2Bi XoMM67aZ0i1Ft2trCIF8GbLaejG6epBkeKkUMMSozKqFP5DjhNbD2f3WAlMI15iW CcdyPS5re1ymPp66UlycTDSkN19wD8LfgQPLJCNM3EV8g8qs9LaKzEPWunBoZmw1 a+QX2zK8J07S21F8iq2sf/Qe1EDdmgOEOf7pmB/A5/PKqgXZPG7lYNYuhIKyFsdL mO+BqWWp0a953JJjsiutxyUCyUd8jtwwxRa0B66oqSQ1jO+xj6XDxjEL8ACuT8Iq 9wFJluTCN6lfxyV8mrSfweT0fQh/W/zVF7EJZHWdKXEzuADxMp9X06wtMQ82ea+k /wgN7DUpBZczRtlqaxt1VSkER75QwAMy/oSpA974+O120QCwLMQ= =aux1 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma updates from Jason Gunthorpe: - Minor bug fixes in mlx5, mthca, pvrdma, rtrs, mlx4, hfi1, hns - Minor cleanups: coding style, useless includes and documentation - Reorganize how multicast processing works in rxe - Replace a red/black tree with xarray in rxe which improves performance - DSCP support and HW address handle re-use in irdma - Simplify the mailbox command handling in hns - Simplify iser now that FMR is eliminated * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (93 commits) RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit() IB/iser: Fix error flow in case of registration failure IB/iser: Generalize map/unmap dma tasks IB/iser: Use iser_fr_desc as registration context IB/iser: Remove iser_reg_data_sg helper function RDMA/rxe: Use standard names for ref counting RDMA/rxe: Replace red-black trees by xarrays RDMA/rxe: Shorten pool names in rxe_pool.c RDMA/rxe: Move max_elem into rxe_type_info RDMA/rxe: Replace obj by elem in declaration RDMA/rxe: Delete _locked() APIs for pool objects RDMA/rxe: Reverse the sense of RXE_POOL_NO_ALLOC RDMA/rxe: Replace mr by rkey in responder resources RDMA/rxe: Fix ref error in rxe_av.c RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT RDMA/irdma: Add support for address handle re-use RDMA/qib: Fix typos in comments RDMA/mlx5: Fix memory leak in error flow for subscribe event routine Revert "RDMA/core: Fix ib_qp_usecnt_dec() called when error" RDMA/rxe: Remove useless argument for update_state() ... |
||
Linus Torvalds
|
85c7000fda |
The highlights are:
- several changes to how snap context and snap realms are tracked (Xiubo Li). In particular, this should resolve a long-standing issue of high kworker CPU usage and various stalls caused by needless iteration over all inodes in the snap realm. - async create fixes to address hangs in some edge cases (Jeff Layton) - support for getvxattr MDS op for querying server-side xattrs, such as file/directory layouts and ephemeral pins (Milind Changire) - average latency is now maintained for all metrics (Venky Shankar) - some tweaks around handling inline data to make it fit better with netfs helper library (David Howells) Also a couple of memory leaks got plugged along with a few assorted fixups. Last but not least, Xiubo has stepped up to serve as a CephFS co-maintainer. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmI8qE4THGlkcnlvbW92 QGdtYWlsLmNvbQAKCRBKf944AhHzi9UvB/kBZt4mkyjqRC+KJ5rukw5q7lyAYGC1 QYVbuTuIJydyDvqQp9pXYFndlj10pb7ULnUlQlcBfntVAr9s7xx7ZKrKciE48MPT vLiJmq3MpEedM4oE4FgcJbmHtltDgZWvOxXB7renpHNeHuPeezNpKzaKQXGUHUDo +7cX5XWBzZk+AYbEvxQUsjDozcgDp31qf015mAX3r0P7XFkBB7xwZA7sb7Cw1GEr S6ZdlNoFcWUq0ULUdh2C7l5a2mKQnVnpOO3TMjE6tSqJ74iozRy4tO9aFgj99NEn D1rQbCLr3JPfY//JFyqEOIDYf3hepOMmEkoGHOFukckFKUe3yfJJxa3r =ESr5 -----END PGP SIGNATURE----- Merge tag 'ceph-for-5.18-rc1' of https://github.com/ceph/ceph-client Pull ceph updates from Ilya Dryomov: "The highlights are: - several changes to how snap context and snap realms are tracked (Xiubo Li). In particular, this should resolve a long-standing issue of high kworker CPU usage and various stalls caused by needless iteration over all inodes in the snap realm. - async create fixes to address hangs in some edge cases (Jeff Layton) - support for getvxattr MDS op for querying server-side xattrs, such as file/directory layouts and ephemeral pins (Milind Changire) - average latency is now maintained for all metrics (Venky Shankar) - some tweaks around handling inline data to make it fit better with netfs helper library (David Howells) Also a couple of memory leaks got plugged along with a few assorted fixups. Last but not least, Xiubo has stepped up to serve as a CephFS co-maintainer" * tag 'ceph-for-5.18-rc1' of https://github.com/ceph/ceph-client: (27 commits) ceph: fix memory leak in ceph_readdir when note_last_dentry returns error ceph: uninitialized variable in debug output ceph: use tracked average r/w/m latencies to display metrics in debugfs ceph: include average/stdev r/w/m latency in mds metrics ceph: track average r/w/m latency ceph: use ktime_to_timespec64() rather than jiffies_to_timespec64() ceph: assign the ci only when the inode isn't NULL ceph: fix inode reference leakage in ceph_get_snapdir() ceph: misc fix for code style and logs ceph: allocate capsnap memory outside of ceph_queue_cap_snap() ceph: do not release the global snaprealm until unmounting ceph: remove incorrect and unused CEPH_INO_DOTDOT macro MAINTAINERS: add Xiubo Li as cephfs co-maintainer ceph: eliminate the recursion when rebuilding the snap context ceph: do not update snapshot context when there is no new snapshot ceph: zero the dir_entries memory when allocating it ceph: move to a dedicated slabcache for ceph_cap_snap ceph: add getvxattr op libceph: drop else branches in prepare_read_data{,_cont} ceph: fix comments mentioning i_mutex ... |
||
Linus Torvalds
|
b1b07ba356 |
New code for 5.18:
- Fix some incorrect mapping state being passed to iomap during COW - Don't create bogus selinux audit messages when deciding to degrade gracefully due to lack of privilege - Fix setattr implementation to use VFS helpers so that we drop setgid consistently with the other filesystems - Fix link/unlink/rename to check quota limits - Constify xfs_name_dotdot to prevent abuse of in-kernel symbols - Fix log livelock between the AIL and inodegc threads during recovery - Fix a log stall when the AIL races with pushers - Fix stalls in CIL flushes due to pinned inode cluster buffers during recovery - Fix log corruption due to incorrect usage of xfs_is_shutdown vs xlog_is_shutdown because during an induced fs shutdown, AIL writeback must continue until the log is shut down, even if the filesystem has already shut down -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmI3UQ8ACgkQ+H93GTRK tOttpBAAjz05QkClIYKlHREiWt4a2a0FnRBvkz2fvZb0Nk3kST/drJ14VAb1Q3g1 HvvOGwssyJShkbd6DBGTqrp9AzZ0mfhSYPpARtCNwOvUNV4tXwLdiBZ86H4/l3qy seS1tXW4pUKm6xhN9fnMw1sk4oJmPXq67JW+1h35oDaE6tpdd9lehFMpMxaTMjED 4WsU0UwKCWr4l1lKP1EXvh+ENJeo0QZpccNHV3ChLnWx0mPMRpf4tQP2A01oBPkh oXHSms0TV7FHDIv+Zil3kBgkfh266WhcPdZ4pfIqyQc51LzbgrxEqcrZHGI5XJjB zcQd8RkzOI68XIDchijOorOkQZmDEDIGlCgSY6q/JV4N2iFyF84hHedk2le5j97l Jmout2Xng3bgstl4963IjXk8SvPTebnI76a62XoEcHnf4KBROLKIU7wNCh5LXNvk CI6AWJGy6EAGEc3BHyPFZxZF72D9rUmRbPIJBc7rBhJgMoIy4L4sFlvVtyppbERb gMH9PNTLjY5/abQkV044iLOsEDh5FEPBIehoaENNo252vj2R/WsAAQL13l0cMsrN vAryGdAEelZEyg62k+HT4W87zjH0Kgtgli6zMdx7akYdjKbMOIZALEu61iBH7KT+ heAz8pU/krTy+Q583XU13eCWnY1wPrHRMwdGF+i4WUGiKuJSoYg= =uHT0 -----END PGP SIGNATURE----- Merge tag 'xfs-5.18-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs updates from Darrick Wong: "The biggest change this cycle is bringing XFS' inode attribute setting code back towards alignment with what the VFS does. IOWs, setgid bit handling should be a closer match with ext4 and btrfs behavior. The rest of the branch is bug fixes around the filesystem -- patching gaps in quota enforcement, removing bogus selinux audit messages, and fixing log corruption and problems with log recovery. There will be a second pull request later on in the merge window with more bug fixes. Dave Chinner will be taking over as XFS maintainer for one release cycle, starting from the day 5.18-rc1 drops until 5.19-rc1 is tagged so that I can focus on starting a massive design review for the (feature complete after five years) online repair feature. Summary: - Fix some incorrect mapping state being passed to iomap during COW - Don't create bogus selinux audit messages when deciding to degrade gracefully due to lack of privilege - Fix setattr implementation to use VFS helpers so that we drop setgid consistently with the other filesystems - Fix link/unlink/rename to check quota limits - Constify xfs_name_dotdot to prevent abuse of in-kernel symbols - Fix log livelock between the AIL and inodegc threads during recovery - Fix a log stall when the AIL races with pushers - Fix stalls in CIL flushes due to pinned inode cluster buffers during recovery - Fix log corruption due to incorrect usage of xfs_is_shutdown vs xlog_is_shutdown because during an induced fs shutdown, AIL writeback must continue until the log is shut down, even if the filesystem has already shut down" * tag 'xfs-5.18-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: xfs_is_shutdown vs xlog_is_shutdown cage fight xfs: AIL should be log centric xfs: log items should have a xlog pointer, not a mount xfs: async CIL flushes need pending pushes to be made stable xfs: xfs_ail_push_all_sync() stalls when racing with updates xfs: check buffer pin state after locking in delwri_submit xfs: log worker needs to start before intent/unlink recovery xfs: constify xfs_name_dotdot xfs: constify the name argument to various directory functions xfs: reserve quota for target dir expansion when renaming files xfs: reserve quota for dir expansion when linking/unlinking files xfs: refactor user/group quota chown in xfs_setattr_nonsize xfs: use setattr_copy to set vfs inode attributes xfs: don't generate selinux audit messages for capability testing xfs: add missing cmap->br_state = XFS_EXT_NORM update |
||
Linus Torvalds
|
f0614eefbf |
dax for 5.18
- Fix a crash due to a missing rcu_barrier() in dax_fs_exit() - Fix two miscellaneous doc issues -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYjp4zgAKCRDfioYZHlFs ZwgDAQD/jJE/uyFozwZR/YD8G293Hzs/acPUEQ/09t06W68SIAEAtwBr3WHKiFJL M+utFlm05fShOQl3lGwqiPS5/mQvzwc= =7AnI -----END PGP SIGNATURE----- Merge tag 'dax-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull DAX updates from Dan Williams: "Andrew has been shepherding major dax features that touch the core -mm through his tree, but I still collect the dax updates that are core-mm independent. - Fix a crash due to a missing rcu_barrier() in dax_fs_exit() - Fix two miscellaneous doc issues" * tag 'dax-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix missing kdoc for dax_device dax: make sure inodes are flushed before destroy cache fsdax: fix function description |
||
Linus Torvalds
|
b9132c32e0 |
cxl for 5.18
- Add a driver for 'struct cxl_memdev' objects responsible for CXL.mem operation as distinct from 'cxl_pci' mailbox operations. Its primary responsibility is enumerating an endpoint 'struct cxl_port' and all the 'struct cxl_port' instances between an endpoint and the CXL platform root. - Add a driver for 'struct cxl_port' objects responsible for enumerating and operating all Host-managed Device Memory (HDM) decoder resources between the platform-level CXL memory description, all intervening host bridges / switches, and the HDM resources in endpoints. - Update the cxl_pci driver to validate CXL.mem operation precursors to HDM decoder operation like ready-polling, and legacy CXL 1.1 DVSEC based CXL.mem configuration. - Add basic lockdep coverage for usage of device_lock() on CXL subsystem objects similar to what exists for LIBNVDIMM. Include a compile-time switch for which subsystem to validate at run-time. - Update cxl_test to emulate a one level switch topology. - Document a "Theory of Operation" for the subsystem. - Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs - Include miscellaneous fixes for spec / QEMU CXL emulation compatibility and static analysis reports. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYjpX6AAKCRDfioYZHlFs ZzyxAQCztxAXj7mzkm1Qt5zZz4e7p/6sR49B03jBTfPtrEF9kQEAl9R15WVt6U+o Ooof1XhRic3kT6e8zS3ZVKHzGduYxwM= =mR94 -----END PGP SIGNATURE----- Merge tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL (Compute Express Link) updates from Dan Williams: "This development cycle extends the subsystem to discover CXL resources throughout a CXL/PCIe switch topology and respond to hot add/remove events anywhere in that topology. This is more foundational infrastructure in preparation for dynamic memory region provisioning support. Recall that CXL memory regions, as the new "Theory of Operation" section of Documentation/driver-api/cxl/memory-devices.rst describes, bring storage volume striping semantics to memory. The hot add/remove behavior is validated with extensions to the cxl_test unit test environment and this test in the cxl-cli test suite: https://github.com/pmem/ndctl/blob/djbw/for-74/cxl/test/cxl-topology.sh Summary: - Add a driver for 'struct cxl_memdev' objects responsible for CXL.mem operation as distinct from 'cxl_pci' mailbox operations. Its primary responsibility is enumerating an endpoint 'struct cxl_port' and all the 'struct cxl_port' instances between an endpoint and the CXL platform root. - Add a driver for 'struct cxl_port' objects responsible for enumerating and operating all Host-managed Device Memory (HDM) decoder resources between the platform-level CXL memory description, all intervening host bridges / switches, and the HDM resources in endpoints. - Update the cxl_pci driver to validate CXL.mem operation precursors to HDM decoder operation like ready-polling, and legacy CXL 1.1 DVSEC based CXL.mem configuration. - Add basic lockdep coverage for usage of device_lock() on CXL subsystem objects similar to what exists for LIBNVDIMM. Include a compile-time switch for which subsystem to validate at run-time. - Update cxl_test to emulate a one level switch topology. - Document a "Theory of Operation" for the subsystem. - Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs - Include miscellaneous fixes for spec / QEMU CXL emulation compatibility and static analysis reports" * tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (48 commits) cxl/core/port: Fix NULL but dereferenced coccicheck error cxl/port: Hold port reference until decoder release cxl/port: Fix endpoint refcount leak cxl/core: Fix cxl_device_lock() class detection cxl/core/port: Fix unregister_port() lock assertion cxl/regs: Fix size of CXL Capability Header Register cxl/core/port: Handle invalid decoders cxl/core/port: Fix / relax decoder target enumeration tools/testing/cxl: Add a physical_node link tools/testing/cxl: Enumerate mock decoders tools/testing/cxl: Mock one level of switches tools/testing/cxl: Fix root port to host bridge assignment tools/testing/cxl: Mock dvsec_ranges() cxl/core/port: Add endpoint decoders cxl/core: Move target_list out of base decoder attributes cxl/mem: Add the cxl_mem driver cxl/core/port: Add switch port enumeration cxl/memdev: Add numa_node attribute cxl/pci: Emit device serial number cxl/pci: Implement wait for media active ... |
||
Linus Torvalds
|
b14ffae378 |
drm for 5.18-rc1
dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmI71h4ACgkQDHTzWXnE hr6wKg//SvKFiEOhptua8Ao8XYkhXpg1/tgdAs4D7bZ0YgJyF4Im0RuFOKMmF3mN 0Y8AwguqrsmrOAFbK8B1WEysB66DmGlZN/V2Q75X7fui8xs4uGF2Fcxyr+265zhf vONPwAoxYr+KXqwOI1p1BP2QEL6bJTdu+nrXRsXIBIrWnw8ehXJlw3fDhgvG5QBn RPdbU7lQnd47hdYxkbe5SiZvWnPC46dJmpqsRJir0xjskR6juU36f34C4IKhTGwO NDPeWVgusVXtIC/F4X6RebCWG0f66h+CUFa9zeYIleI/2/5yZWXfcw6Obx8HgPkt gieiI0R4TpkVxeHCApCQ5UpxWgfSOXdoDoyw172bKQw7JCHVEkSwenyMEEwNet6r SCJrRmlB1PBI/iTWmhm9qgrU46ZZyAnQoTlCsXGzJncdP3hzGlA1embl00yfEl7f wzM35N20qd5T4VKUEF8QYF0fLZYmKw4cWVASu4hQ3qmGal6frilphz2J8JK8hQNq KhFqNbVTnZsQNr9LBCbrf0kOPaMzpmW+2vQG9ApdAb1N3gNPZT7ctti0Xq5N2OUR AipWFAsDPS2NPADKmBtDU55PgFH9MqUIsoHHXLV4Qi76dvCqYoN68qRQxrL7rpSu b0gr0YKU2QcIB/uytjOPHcgtI5Xvrh+q8JPz/dJ38/Esgjmk4wo= =uRsT -----END PGP SIGNATURE----- Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "Lots of work all over, Intel improving DG2 support, amdkfd CRIU support, msm new hw support, and faster fbdev support. dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device" * tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits) drm/i915/display: Do not re-enable PSR after it was marked as not reliable drm/i915/display: Fix HPD short pulse handling for eDP drm/amdgpu: Use drm_mode_copy() drm/radeon: Use drm_mode_copy() drm/amdgpu: Use ternary operator in `vcn_v1_0_start()` drm/amdgpu: Remove pointless on stack mode copies drm/amd/pm: fix indenting in __smu_cmn_reg_print_error() drm/amdgpu/dc: fix typos in comments drm/amdgpu: fix typos in comments drm/amd/pm: fix typos in comments drm/amdgpu: Add stolen reserved memory for MI25 SRIOV. drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations. drm/amdkfd: evict svm bo worker handle error drm/amdgpu/vcn: fix vcn ring test failure in igt reload test drm/amdgpu: only allow secure submission on rings which support that drm/amdgpu: fixed the warnings reported by kernel test robot drm/amd/display: 3.2.177 drm/amd/display: [FW Promotion] Release 0.0.108.0 drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2 drm/amd/display: Wait for hubp read line for Pollock ... |
||
Linus Torvalds
|
52deda9551 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ... |
||
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmI7YBcACgkQMUZtbf5S IrveSBAAmSNJlUK6vPsnNzs7IhsZnfI/AUjm2TCLZnlhKttbpI4A/4Pohk33V7RS FGX7f8kjEfhUwrIiLDgeCnztNHRECrCmk6aZc/jLEvecmTauJ+f6kjShkDY/wix+ AkPHmrZnQeLPAEVuljDdV+sL6ik08+zQL7PazIYHsaSKKC0MGQptRwcri8PLRAKE KPBAhVhleq2rAZ/ntprSN52F4Af6rpFTrPIWuN8Bqdbc9dy5094LT0mpOOWYvgr3 /DLvvAPuLemwyIQkjWknVKBRUAQcmNPC+BY3J8K3LRaiNhekGqOFan46BfqP+k2J 6DWu0Qrp2yWt4BMOeEToZR5rA6v5suUAMIBu8PRZIDkINXQMlIxHfGjZyNm0rVfw 7edNri966yus9OdzwPa32MIG3oC6PnVAwYCJAjjBMNS8sSIkp7wgHLkgWN4UFe2H K/e6z8TLF4UQ+zFM0aGI5WZ+9QqWkTWEDF3R3OhdFpGrznna0gxmkOeV2YvtsgxY cbS0vV9Zj73o+bYzgBKJsw/dAjyLdXoHUGvus26VLQ78S/VGunVKtItwoxBAYmZo krW964qcC89YofzSi8RSKLHuEWtNWZbVm8YXr75u6jpr5GhMBu0CYefLs+BuZcxy dw8c69cGneVbGZmY2J3rBhDkchbuICl8vdUPatGrOJAoaFdYKuw= =ELpe -----END PGP SIGNATURE----- Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ... |
||
Linus Torvalds
|
7403e6d826 |
VFIO updates for v5.18-rc1
- Introduce new device migration uAPI and implement device specific mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe, Yishai Hadas, Leon Romanovsky) - New HiSilicon acc vfio-pci variant driver, also supporting migration interface (Shameer Kolothum, Longfang Liu) - D3hot fixes for vfio-pci-core (Abhishek Sahu) - Document new vfio-pci variant driver acceptance criteria (Alex Williamson) - Fix UML build unresolved ioport_{un}map() functions (Alex Williamson) - Fix MAINTAINERS due to header movement (Lukas Bulwahn) -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmI6HGwbHGFsZXgud2ls bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsiyxcP/18Mh4eYJudvqU7ARH/H 8E2V+5YhkdVG088KZcB/sTEfVKAbROZrJ3zxkZMXU/OU2cYELHG2pgaI8yCMzHJK krz+kZ2p+nA/AMKp8V0xB0MCspTpX/3/6zHV2wDals+gTTLH34N0r6swh0wCjoSa wN+3ahE+c6KkX41H8X2Dup5YVM4ohg8MbCd3jSIFBrRDj6SMRGr7zytezCdLhnVs TwadlReOYSqKsuvcVnHObWbsOj5WCmuld2u9j0kTPknRm6VtxkfNFQTpKk3sbAcO SaPwDP0485plwCVZkNJELZVaF+qYIFW5WZLD5wlJNoH/mZE68a5BKbYFKSLt1gs3 ntYdktcmsBLVQxTNxcZ6/gwEV2/wuY6v7C3cm0jT0AqXgPIdOqrwlzafTwP+Z/KU TC9x4EzPPvdsnBCut0XJZg4QUNlJ7Cp+62vxXqhLGPA2cd4tjGO/8B1KOm05B7VQ 2XiDtlsW7pwx4v6jRPPdvoqUMd5qqjKF9RepTktirUSXv8z6NIjSyzGn3HZLrk6f 7AHnlltUg56y/c6hmLxe25PrXKpGqO1fFIcuPYpC+IbBHrE4NVqOhi3ieoonO5GZ nwe6IT/fLxsLOudUG/dJ3swuoE8o2Glf17rV9e53K8zF9J9LoFJQsqSFbUzR17pD NGN+nA8dWFmmLDS4uYiY9WBg =Sv96 -----END PGP SIGNATURE----- Merge tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio Pull VFIO updates from Alex Williamson: - Introduce new device migration uAPI and implement device specific mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe, Yishai Hadas, Leon Romanovsky) - New HiSilicon acc vfio-pci variant driver, also supporting migration interface (Shameer Kolothum, Longfang Liu) - D3hot fixes for vfio-pci-core (Abhishek Sahu) - Document new vfio-pci variant driver acceptance criteria (Alex Williamson) - Fix UML build unresolved ioport_{un}map() functions (Alex Williamson) - Fix MAINTAINERS due to header movement (Lukas Bulwahn) * tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits) vfio-pci: Provide reviewers and acceptance criteria for variant drivers MAINTAINERS: adjust entry for header movement in hisilicon qm driver hisi_acc_vfio_pci: Use its own PCI reset_done error handler hisi_acc_vfio_pci: Add support for VFIO live migration crypto: hisilicon/qm: Set the VF QM state register hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices hisi_acc_qm: Move VF PCI device IDs to common header crypto: hisilicon/qm: Move few definitions to common header crypto: hisilicon/qm: Move the QM header to include/linux vfio/mlx5: Fix to not use 0 as NULL pointer PCI/IOV: Fix wrong kernel-doc identifier vfio/mlx5: Use its own PCI reset_done error handler vfio/pci: Expose vfio_pci_core_aer_err_detected() vfio/mlx5: Implement vfio_pci driver for mlx5 devices vfio/mlx5: Expose migration commands over mlx5 device vfio: Remove migration protocol v1 documentation vfio: Extend the device migration protocol with RUNNING_P2P vfio: Define device migration protocol v2 ... |
||
Linus Torvalds
|
66711cfea6 |
hyperv-next for 5.18
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmI6MhgTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXiBkB/9FEaebcytvBMNVnz/fprfQWfYxdrUB wmDB9dnJVPX6UcWg6DuDv7KqatimDp7JrnKrNsrqlgF6Wafn/wI3Cdf8ZUi8CgtZ Walq8m2QM9j8WCm4EtgmluzGkHjAn6llmjE7XoLmo/A8MYp0FZhJzghKfCEu54EB 9DhgqQX+zzy7n32CxoAWrGrHegnGeqMpj3rhQ4qVuNn+bOzZ/wTyJQPmXTu4hSW1 0PrXRnfzqnODkB6QDUantABZM5bh1VsqwIlENp+xAFQVsQpsc35lW7AUg7JXczVn ES0+UHG7wVWPJCtIfD4FgIFT1xekPKxRYX9U66LMRbWGYhXfohQX+wFt =u62V -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: "Minor patches from various people" * tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Output host build info as normal Windows version number hv_balloon: rate-limit "Unhandled message" warning drivers: hv: log when enabling crash_kexec_post_notifiers hv_utils: Add comment about max VMbus packet size in VSS driver Drivers: hv: Compare cpumasks and not their weights in init_vp_index() Drivers: hv: Rename 'alloced' to 'allocated' Drivers: hv: vmbus: Use struct_size() helper in kmalloc() |
||
Linus Torvalds
|
1ebdbeb03e |
ARM:
- Proper emulation of the OSLock feature of the debug architecture - Scalibility improvements for the MMU lock when dirty logging is on - New VMID allocator, which will eventually help with SVA in VMs - Better support for PMUs in heterogenous systems - PSCI 1.1 support, enabling support for SYSTEM_RESET2 - Implement CONFIG_DEBUG_LIST at EL2 - Make CONFIG_ARM64_ERRATUM_2077057 default y - Reduce the overhead of VM exit when no interrupt is pending - Remove traces of 32bit ARM host support from the documentation - Updated vgic selftests - Various cleanups, doc updates and spelling fixes RISC-V: - Prevent KVM_COMPAT from being selected - Optimize __kvm_riscv_switch_to() implementation - RISC-V SBI v0.3 support s390: - memop selftest - fix SCK locking - adapter interruptions virtualization for secure guests - add Claudio Imbrenda as maintainer - first step to do proper storage key checking x86: - Continue switching kvm_x86_ops to static_call(); introduce static_call_cond() and __static_call_ret0 when applicable. - Cleanup unused arguments in several functions - Synthesize AMD 0x80000021 leaf - Fixes and optimization for Hyper-V sparse-bank hypercalls - Implement Hyper-V's enlightened MSR bitmap for nested SVM - Remove MMU auditing - Eager splitting of page tables (new aka "TDP" MMU only) when dirty page tracking is enabled - Cleanup the implementation of the guest PGD cache - Preparation for the implementation of Intel IPI virtualization - Fix some segment descriptor checks in the emulator - Allow AMD AVIC support on systems with physical APIC ID above 255 - Better API to disable virtualization quirks - Fixes and optimizations for the zapping of page tables: - Zap roots in two passes, avoiding RCU read-side critical sections that last too long for very large guests backed by 4 KiB SPTEs. - Zap invalid and defunct roots asynchronously via concurrency-managed work queue. - Allowing yielding when zapping TDP MMU roots in response to the root's last reference being put. - Batch more TLB flushes with an RCU trick. Whoever frees the paging structure now holds RCU as a proxy for all vCPUs running in the guest, i.e. to prolongs the grace period on their behalf. It then kicks the the vCPUs out of guest mode before doing rcu_read_unlock(). Generic: - Introduce __vcalloc and use it for very large allocations that need memcg accounting -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmI4fdwUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMq8gf/WoeVHtw2QlL5Mmz6McvRRmPAYPLV wLUIFNrRqRvd8Tw4kivzZoh/xTpwmnojv0YdK5SjKAiMjgv094YI1LrNp1JSPvmL pitocMkA10RSJNWHeEMg9cMSKH0rKiqeYl6S1e2XsdB+UZZ2BINOCVtvglmjTAvJ dFBdKdBkqjAUZbdXAGIvz4JEEER3N/LkFDKGaUGX+0QIQOzGBPIyLTxynxIDG6mt RViCCFyXdy5NkVp5hZFm96vQ2qAlWL9B9+iKruQN++82+oqWbeTdSqPhdwF7GyFz BfOv3gobQ2c4ef/aMLO5LswZ9joI1t/4kQbbAn6dNybpOAz/NXfDnbNefg== =keox -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Proper emulation of the OSLock feature of the debug architecture - Scalibility improvements for the MMU lock when dirty logging is on - New VMID allocator, which will eventually help with SVA in VMs - Better support for PMUs in heterogenous systems - PSCI 1.1 support, enabling support for SYSTEM_RESET2 - Implement CONFIG_DEBUG_LIST at EL2 - Make CONFIG_ARM64_ERRATUM_2077057 default y - Reduce the overhead of VM exit when no interrupt is pending - Remove traces of 32bit ARM host support from the documentation - Updated vgic selftests - Various cleanups, doc updates and spelling fixes RISC-V: - Prevent KVM_COMPAT from being selected - Optimize __kvm_riscv_switch_to() implementation - RISC-V SBI v0.3 support s390: - memop selftest - fix SCK locking - adapter interruptions virtualization for secure guests - add Claudio Imbrenda as maintainer - first step to do proper storage key checking x86: - Continue switching kvm_x86_ops to static_call(); introduce static_call_cond() and __static_call_ret0 when applicable. - Cleanup unused arguments in several functions - Synthesize AMD 0x80000021 leaf - Fixes and optimization for Hyper-V sparse-bank hypercalls - Implement Hyper-V's enlightened MSR bitmap for nested SVM - Remove MMU auditing - Eager splitting of page tables (new aka "TDP" MMU only) when dirty page tracking is enabled - Cleanup the implementation of the guest PGD cache - Preparation for the implementation of Intel IPI virtualization - Fix some segment descriptor checks in the emulator - Allow AMD AVIC support on systems with physical APIC ID above 255 - Better API to disable virtualization quirks - Fixes and optimizations for the zapping of page tables: - Zap roots in two passes, avoiding RCU read-side critical sections that last too long for very large guests backed by 4 KiB SPTEs. - Zap invalid and defunct roots asynchronously via concurrency-managed work queue. - Allowing yielding when zapping TDP MMU roots in response to the root's last reference being put. - Batch more TLB flushes with an RCU trick. Whoever frees the paging structure now holds RCU as a proxy for all vCPUs running in the guest, i.e. to prolongs the grace period on their behalf. It then kicks the the vCPUs out of guest mode before doing rcu_read_unlock(). Generic: - Introduce __vcalloc and use it for very large allocations that need memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits) KVM: use kvcalloc for array allocations KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2 kvm: x86: Require const tsc for RT KVM: x86: synthesize CPUID leaf 0x80000021h if useful KVM: x86: add support for CPUID leaf 0x80000021 KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()" kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU KVM: arm64: fix typos in comments KVM: arm64: Generalise VM features into a set of flags KVM: s390: selftests: Add error memop tests KVM: s390: selftests: Add more copy memop tests KVM: s390: selftests: Add named stages for memop test KVM: s390: selftests: Add macro as abstraction for MEM_OP KVM: s390: selftests: Split memop tests KVM: s390x: fix SCK locking RISC-V: KVM: Implement SBI HSM suspend call RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function RISC-V: Add SBI HSM suspend related defines RISC-V: KVM: Implement SBI v0.3 SRST extension ... |
||
Linus Torvalds
|
efee6c7929 |
A patch to avoid unnecessarily leaking kernel command line arguments.
TOMOYO: fix __setup handlers return values security/tomoyo/load_policy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJiOZ6XAAoJEEJfEo0MZPUqzwMQAIdvnEHjVOm3jdtTjaOAHAQF 6ElOMwb0fD4dxSSwcXIy7PaMSr7J/ZgT74Gx/7Cv9UODAqqwoRw0ip5TeTp6NyJT jjqXGAr5Ft3JQnM0CuxXaRrUqr5eb+9bafGS0XQV/BS/Hhhbmk7FtkfHqEiYLqNr d6nWi1rkvNbBeDthYquWfHS0QJQlwFToFe/DiyomE+t5txZYzqITPknPj811I4jj MA7KxAvvQh4nHi2nM9nUXf6FPSqnyfEOyMrF/xriXE3w0iI2WWOFTNGMKKCwaSzV 0TwzcAHDbcW1tfgBEL/7t+REpZDl5vW35po0qskyLYZIdX0xPl/0qifFlzN9h4qB Ls0NJlVaZL/F51I4Es3CHkpHOyqUnUhFGvaSjunnadH6frQ+xgTjjZfwQ2U0WJlM 0695Lflt+WCyw1RUmGiyNEdpISLFHhueFuvUWHx1Wn5PI2P/JCYKU3Dz3yx3o30a vwpVyyXP9tuyCnF35EQQIl2nuMRwHzlizsYdIz3UVtxkDNK3Vj9QdPYXrSMFrrTO 2OAYoIm8gBKic8YYM/J2L3TL/Tb4Xn2ilxGGEjTmAUkC4XiutqbNjEVY5Aqk7PnW izqhWwE+Jlg5GGW+YUPNT839M8sLfTq3VI5dBaloxWUQy5nCPUuSSFfU/ge20DVK kjpJBEAVHDA7rOAV/gIq =ZBqm -----END PGP SIGNATURE----- Merge tag 'tomoyo-pr-20220322' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1 Pull tomoyo update from Tetsuo Handa: "Avoid unnecessarily leaking kernel command line arguments" * tag 'tomoyo-pr-20220322' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: TOMOYO: fix __setup handlers return values |
||
Linus Torvalds
|
3ce62cf4dc |
flexible-array transformations for 5.18-rc1
Hi Linus, Please, pull the following treewide patch that replaces zero-length arrays with flexible-array members. This patch has been baking in linux-next for a whole development cycle. Thanks -- Gustavo -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmI6GIUACgkQRwW0y0cG 2zFLWw/+OB1gZeQD3boKpUMntWnn6wjhUxdrO8CYkpzG+B+8TFECXNjy8HV1CSiw GKKRndYELOyYaD5o/F2vtPe10iPHbrdIlMFRPBRoht0/cvSZgzHlfT8EjWQwerYY dieztUFKjeSj0MXivdNDnKOTm8o9cz8KmCrWFP+My37Fasn/9+nBX8iNVIvAX4xy T+IVmjtDifQUsTs298UGnBvDeuZOiGHhXXU5rq6lIX0Rl554OsWZW94d6jUPj/h7 t1v6jdojNuyaMKn45/xnPj9VvmDiSu3K67m3fjRdzLPDOhISjr2fw4KEUOKdsebh yJ9t5u8IufyPbm9kyI+rZt+T8ZlV2/qt2+mt6QgtDMnWrs+4nU15JY0SHImMSBZQ rBEZcQlrIcGJ+CsNB8Y7jIGYO0SSkhodAvfl0LRA0AbTqLGqq0OkAQS5D52r3H2r uz6xdYb7kG43XaRyaAIPqhZsp/jk2NrXvEvin2tSaXZFR1cxp+oxcV2UajmnOU6i EIBS4PzJnYx2RZRa+h8YbBa/+D4N6+fj/tjmwBawiUBPjjaLAsGFNwUHqvBoD05S bk6oXi654NBwVjsknZ0grVz0TtSvdZ3uJL5FZApTOHITqH8vlxlNefmHri4vZRZO NN7NIQ0yaUCnorzMg+vP8ZtflhQwrMJbjwIS9YD0RHd7MBhYX8k= =xZD2 -----END PGP SIGNATURE----- Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array transformations from Gustavo Silva: "Treewide patch that replaces zero-length arrays with flexible-array members. This has been baking in linux-next for a whole development cycle" * tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: treewide: Replace zero-length arrays with flexible-array members |
||
Linus Torvalds
|
cd4699c5fd |
prlimit and set/getpriority tasklist_lock optimizations
The tasklist_lock popped up as a scalability bottleneck on some testing workloads. The readlocks in do_prlimit and set/getpriority are not necessary in all cases. Based on a cycles profile, it looked like ~87% of the time was spent in the kernel, ~42% of which was just trying to get *some* spinlock (queued_spin_lock_slowpath, not necessarily the tasklist_lock). The big offenders (with rough percentages in cycles of the overall trace): - do_wait 11% - setpriority 8% (this patchset) - kill 8% - do_exit 5% - clone 3% - prlimit64 2% (this patchset) - getrlimit 1% (this patchset) I can't easily test this patchset on the original workload for various reasons. Instead, I used the microbenchmark below to at least verify there was some improvement. This patchset had a 28% speedup (12% from baseline to set/getprio, then another 14% for prlimit). One interesting thing is that my libc's getrlimit() was calling prlimit64, so hoisting the read_lock(tasklist_lock) into sys_prlimit64 had no effect - it essentially optimized the older syscalls only. I didn't do that in this patchset, but figured I'd mention it since it was an option from the previous patch's discussion. v3: https://lkml.kernel.org/r/20220106172041.522167-1-brho@google.com v2: https://lore.kernel.org/lkml/20220105212828.197013-1-brho@google.com/ - update_rlimit_cpu on the group_leader instead of for_each_thread. - update_rlimit_cpu still returns 0 or -ESRCH, even though we don't care about the error here. it felt safer that way in case someone uses that function again. v1: https://lore.kernel.org/lkml/20211213220401.1039578-1-brho@google.com/ int main(int argc, char **argv) { pid_t child; struct rlimit rlim[1]; fork(); fork(); fork(); fork(); fork(); fork(); for (int i = 0; i < 5000; i++) { child = fork(); if (child < 0) exit(1); if (child > 0) { usleep(1000); kill(child, SIGTERM); waitpid(child, NULL, 0); } else { for (;;) { setpriority(PRIO_PROCESS, 0, getpriority(PRIO_PROCESS, 0)); getrlimit(RLIMIT_CPU, rlim); } } } return 0; } Barret Rhoden (3): setpriority: only grab the tasklist_lock for PRIO_PGRP prlimit: make do_prlimit() static prlimit: do not grab the tasklist_lock include/linux/posix-timers.h | 2 +- include/linux/resource.h | 2 - kernel/sys.c | 127 +++++++++++++++++---------------- kernel/time/posix-cpu-timers.c | 12 +++- 4 files changed, 76 insertions(+), 67 deletions(-) I have dropped the first change in this series as an almost identical change was merged as commit |
||
Linus Torvalds
|
2e2d4650b3 |
fs.rt.v5.18
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYjr50AAKCRCRxhvAZXjc oroBAQC0daGrkl6XJirLzyMVjNWWbuSEdB+Q3ipMrwySxjYmtwD/XSPGAKGBbHQz 13EtvTMT8FlqSyDIKHYBM5uDyrWQZgs= =uJdq -----END PGP SIGNATURE----- Merge tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull mount attributes PREEMPT_RT update from Christian Brauner: "This contains Sebastian's fix to make changing mount attributes/getting write access compatible with CONFIG_PREEMPT_RT. The change only applies when users explicitly opt-in to real-time via CONFIG_PREEMPT_RT otherwise things are exactly as before. We've waited quite a long time with this to make sure folks could take a good look" * tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs/namespace: Boost the mount_lock.lock owner instead of spinning on PREEMPT_RT. |
||
Linus Torvalds
|
15f2e3d6c1 |
fs.v5.18
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYjrxKAAKCRCRxhvAZXjc oi77AQDdLziGyeKSHlyPw1xeWiqsZVRLhhD07F8kVaAkjg3ZWwEAs3jL0Pzfnd7J IIx//6YK46cbfc471FdVuUDfMjkfVAw= =VaFd -----END PGP SIGNATURE----- Merge tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull mount_setattr updates from Christian Brauner: "This contains a few more patches to massage the mount_setattr() codepaths and one minor fix to reuse a helper we added some time back. The final two patches do similar cleanups in different ways. One patch is mine and the other is Al's who was nice enough to give me a branch for it. Since his came in later and my branch had been sitting in -next for quite some time we just put his on top instead of swap them" * tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: mount_setattr(): clean the control flow and calling conventions fs: clean up mount_setattr control flow fs: don't open-code mnt_hold_writers() fs: simplify check in mount_setattr_commit() fs: add mnt_allow_writers() and simplify mount_setattr_prepare() |
||
Feiyang Chen
|
f8f9f21c78 |
MIPS: Fix build error for loongson64 and sgi-ip27
Select HAVE_ARCH_NODEDATA_EXTENSION for loongson64 to fix build error when CONFIG_NUMA=y: mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init': (.init.text+0x1714): undefined reference to `node_data' mips64el-unknown-linux-gnu-ld: (.init.text+0x1730): undefined reference to `node_data' Also, select HAVE_ARCH_NODEDATA_EXTENSION for sgi-ip27 to fix build error: mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init': page_alloc.c:(.init.text+0x1ba8): undefined reference to `node_data' mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bcc): undefined reference to `node_data' mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1be4): undefined reference to `node_data' mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bf4): undefined reference to `node_data' Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
Marco Elver
|
b027471ada |
Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
This reverts commit |
||
Miaohe Lin
|
0cbcc92917 |
kernel/resource: fix kfree() of bootmem memory again
Since commit |
||
Aleksandr Nogikh
|
b3d7fe86fb |
kcov: properly handle subsequent mmap calls
Allocate the kcov buffer during KCOV_MODE_INIT in order to untie mmapping of a kcov instance and the actual coverage collection process. Modify kcov_mmap, so that it can be reliably used any number of times once KCOV_MODE_INIT has succeeded. These changes to the user-facing interface of the tool only weaken the preconditions, so all existing user space code should remain compatible with the new version. Link: https://lkml.kernel.org/r/20220117153634.150357-3-nogikh@google.com Signed-off-by: Aleksandr Nogikh <nogikh@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Taras Madan <tarasmadan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Aleksandr Nogikh
|
17581aa136 |
kcov: split ioctl handling into locked and unlocked parts
Patch series "kcov: improve mmap processing", v3. Subsequent mmaps of the same kcov descriptor currently do not update the virtual memory of the task and yet return 0 (success). This is counter-intuitive and may lead to unexpected memory access errors. Also, this unnecessarily limits the functionality of kcov to only the simplest usage scenarios. Kcov instances are effectively forever attached to their first address spaces and it becomes impossible to e.g. reuse the same kcov handle in forked child processes without mmapping the memory first. This is exactly what we tried to do in syzkaller and inadvertently came upon this behavior. This patch series addresses the problem described above. This patch (of 3): Currently all ioctls are de facto processed under a spinlock in order to serialise them. This, however, prohibits the use of vmalloc and other memory management functions in the implementations of those ioctls, unnecessary complicating any further changes to the code. Let all ioctls first be processed inside the kcov_ioctl() function which should execute the ones that are not compatible with spinlock and then pass control to kcov_ioctl_locked() for all other ones. KCOV_REMOTE_ENABLE is processed both in kcov_ioctl() and kcov_ioctl_locked() as the steps are easily separable. Although it is still compatible with a spinlock, move KCOV_INIT_TRACE handling to kcov_ioctl(), so that the changes from the next commit are easier to follow. Link: https://lkml.kernel.org/r/20220117153634.150357-1-nogikh@google.com Link: https://lkml.kernel.org/r/20220117153634.150357-2-nogikh@google.com Signed-off-by: Aleksandr Nogikh <nogikh@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Taras Madan <tarasmadan@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Guilherme G. Piccoli
|
f953f140f3 |
panic: move panic_print before kmsg dumpers
The panic_print setting allows users to collect more information in a panic event, like memory stats, tasks, CPUs backtraces, etc. This is an interesting debug mechanism, but currently the print event happens *after* kmsg_dump(), meaning that pstore, for example, cannot collect a dmesg with the panic_print extra information. This patch changes that in 2 steps: (a) The panic_print setting allows to replay the existing kernel log buffer to the console (bit 5), besides the extra information dump. This functionality makes sense only at the end of the panic() function. So, we hereby allow to distinguish the two situations by a new boolean parameter in the function panic_print_sys_info(). (b) With the above change, we can safely call panic_print_sys_info() before kmsg_dump(), allowing to dump the extra information when using pstore or other kmsg dumpers. The additional messages from panic_print could overwrite the oldest messages when the buffer is full. The only reasonable solution is to use a large enough log buffer, hence we added an advice into the kernel parameters documentation about that. Link: https://lkml.kernel.org/r/20220214141308.841525-1-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Guilherme G. Piccoli
|
8d470a45d1 |
panic: add option to dump all CPUs backtraces in panic_print
Currently the "panic_print" parameter/sysctl allows some interesting debug information to be printed during a panic event. This is useful for example in cases the user cannot kdump due to resource limits, or if the user collects panic logs in a serial output (or pstore) and prefers a fast reboot instead of a kdump. Happens that currently there's no way to see all CPUs backtraces in a panic using "panic_print" on architectures that support that. We do have "oops_all_cpu_backtrace" sysctl, but although partially overlapping in the functionality, they are orthogonal in nature: "panic_print" is a panic tuning (and we have panics without oopses, like direct calls to panic() or maybe other paths that don't go through oops_enter() function), and the original purpose of "oops_all_cpu_backtrace" is to provide more information on oopses for cases in which the users desire to continue running the kernel even after an oops, i.e., used in non-panic scenarios. So, we hereby introduce an additional bit for "panic_print" to allow dumping the CPUs backtraces during a panic event. Link: https://lkml.kernel.org/r/20211109202848.610874-3-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: Feng Tang <feng.tang@intel.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Guilherme G. Piccoli
|
a1ff1de00d |
docs: sysctl/kernel: add missing bit to panic_print
Patch series "Some improvements on panic_print". This is a mix of a documentation fix with some additions to the "panic_print" syscall / parameter. The goal here is being able to collect all CPUs backtraces during a panic event and also to enable "panic_print" in a kdump event - details of the reasoning and design choices in the patches. This patch (of 3): Commit |
||
Lukas Bulwahn
|
92333baace |
taskstats: remove unneeded dead assignment
make clang-analyzer on x86_64 defconfig caught my attention with:
kernel/taskstats.c:120:2: warning: Value stored to 'rc' is never read \
[clang-analyzer-deadcode.DeadStores]
rc = 0;
^
Commit
|
||
Tiezhu Yang
|
e7ce750037 |
kasan: no need to unset panic_on_warn in end_report()
panic_on_warn is unset inside panic(), so no need to unset it before calling panic() in end_report(). Link: https://lkml.kernel.org/r/1644324666-15947-6-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Xuefeng Li <lixuefeng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Tiezhu Yang
|
d83ce027a5 |
ubsan: no need to unset panic_on_warn in ubsan_epilogue()
panic_on_warn is unset inside panic(), so no need to unset it before calling panic() in ubsan_epilogue(). Link: https://lkml.kernel.org/r/1644324666-15947-5-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Xuefeng Li <lixuefeng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Tiezhu Yang
|
1a2383e8b8 |
panic: unset panic_on_warn inside panic()
In the current code, the following three places need to unset panic_on_warn before calling panic() to avoid recursive panics: kernel/kcsan/report.c: print_report() kernel/sched/core.c: __schedule_bug() mm/kfence/report.c: kfence_report_error() In order to avoid copy-pasting "panic_on_warn = 0" all over the places, it is better to move it inside panic() and then remove it from the other places. Link: https://lkml.kernel.org/r/1644324666-15947-4-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Xuefeng Li <lixuefeng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Tiezhu Yang
|
ae6694c1aa |
docs: kdump: add scp example to write out the dump file
Except cp and makedumpfile, add scp example to write out the dump file. Link: https://lkml.kernel.org/r/1644324666-15947-3-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Baoquan He <bhe@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Xuefeng Li <lixuefeng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Tiezhu Yang
|
b2377d4b94 |
docs: kdump: update description about sysfs file system support
Patch series "Update doc and fix some issues about kdump", v2.
This patch (of 5):
After commit
|
||
Jisheng Zhang
|
d339f1584f |
arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and increase compile coverage. Link: https://lkml.kernel.org/r/20211206160514.2000-5-jszhang@kernel.org Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jisheng Zhang
|
4ece09be99 |
x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and increase compile coverage. Link: https://lkml.kernel.org/r/20211206160514.2000-4-jszhang@kernel.org Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Baoquan He <bhe@redhat.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |