A driver may refuse to enable VLAN filtering for any reason beyond what
the DSA framework cares about, such as:
- having tc-flower rules that rely on the switch being VLAN-aware
- the particular switch does not support VLAN, even if the driver does
(the DSA framework just checks for the presence of the .port_vlan_add
and .port_vlan_del pointers)
- simply not supporting this configuration to be toggled at runtime
Currently, when a driver rejects a configuration it cannot support, it
does this from the commit phase, which triggers various warnings in
switchdev.
So propagate the prepare phase to drivers, to give them the ability to
refuse invalid configurations cleanly and avoid the warnings.
Since we need to modify all function prototypes and check for the
prepare phase from within the drivers, take that opportunity and move
the existing driver restrictions within the prepare phase where that is
possible and easy.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Landen Chao <Landen.Chao@mediatek.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Jonathan McDowell <noodles@earth.li>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rikard Falkeborn says:
====================
net: Constify struct genl_small_ops
Make a couple of static struct genl_small_ops const to allow the compiler
to put them in read-only memory. Patches are independent.
v2: Rebase on net-next, genl_ops -> genl_small_ops
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The only usage of these is to assign their address to the small_ops field
in the genl_family struct, which is a const pointer, and applying
ARRAY_SIZE() on them. Make them const to allow the compiler to put them
in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only usages of mptcp_pm_ops is to assign its address to the small_ops
field of the genl_family struct, which is a const pointer, and applying
ARRAY_SIZE() on it. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Keep the code for the normal (non-error) flow at the lowest
indentation level. And use "goto drop" for all error handling.
2. Replace code that pads short Ethernet frames with a "__skb_pad" call.
3. Change "dev_kfree_skb" to "kfree_skb" in error handling code.
"kfree_skb" is the correct function to call when dropping an skb due to
an error. "dev_kfree_skb", which is an alias of "consume_skb", is for
dropping skbs normally (not due to an error).
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: net-next updates.
This series starts off with the usual update of the firmware interface
spec. A new firmware status bit in the interface will be used in patch
add the infrastructure to read the firmware status very early during
driver probe and this will allow patch #4 to do the recovery if needed.
The rest of the patches add improvements to the current RX reset
logic by localizing the reset to the affected RX ring only and to
reset only if firmware has determined that the RX ring is in permanent
error state.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the driver will schedule RX ring reset when we get a buffer
error in the RX completion record. These RX buffer errors can be due
to normal out-of-buffer conditions or a permanent error in the RX
ring. Because the driver cannot distinguish between these 2
conditions, we assume all these buffer errors require reset.
This is very disruptive when it is just a normal out-of-buffer
condition. Newer firmware will now monitor the rings for the permanent
failure and will send a notification to the driver when it happens.
This allows the driver to reset only when such a notification is
received. In environments where we have predominently out-of-buffer
conditions, we now can avoid these unnecessary resets.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is logic in the RX path to detect unexpected handles in the
RX completion. We'll print a warning and schedule a reset. The
next expected handle is then set to 0xffff which is guaranteed to
not match any valid handle. This will force all remaining packets in
the ring to be discarded before the reset. There can be hundreds of
these packets remaining in the ring and there is no need to print the
warnings for these forced errors.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a per ring rx_resets counter to count these RX resets.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some older chips, it is necessary to do a reset when we get buffer
errors associated with an RX ring. These buffer errors may become
frequent if the RX ring underruns under heavy traffic. The current
code does a global reset of all reasources when this happens. This
works but creates a big disruption of all rings when one RX ring is
having problem. This patch implements a localized RX ring reset of
just the RX ring having the issue. All other rings including all
TX rings will not be affected by this single RX ring reset.
Only the older chips prior to the P5 class supports this reset.
Because it is not a global reset, packets may still be arriving
while we are calling firmware to reset that ring. We need to be
sure that we don't post any buffers during this time while the
ring is undergoing reset. After firmware completes successfully,
the ring will be in the reset state with no buffers and we can start
filling it with new buffers and posting them.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_init_one_rx_ring() includes logic to initialize the BDs for one RX
ring and to allocate the buffers. Separate the allocation logic into a
new bnxt_alloc_one_rx_ring() function. The allocation function will be
used later to allocate new buffers for one specified RX ring when we
reset that RX ring.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_free_rx_skbs() frees all the allocated buffers and SKBs for
every RX ring. Refactor this function by calling a new function
bnxt_free_one_rx_ring_skbs() to free these buffers on one specified
RX ring at a time. This is preparation work for resetting one RX
ring during run-time.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If firmware does not come out of reset, log FW health status info
to provide more information on firmware status.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NS3 SoC platforms require assistance from the OP-TEE to recover
firmware if a crash occurs while no driver is bound. The
CRASHED_NO_MASTER condition is recorded in the firmware status register
during the crash to indicate when driver intervension is needed to
coordinate a firmware reload. This condition is detected during early
driver initialization in order to effect a firmware fastboot on
supported platforms when necessary.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Firmware now supports device independent discovery of the status
register location. This status register can provide more detailed
information about firmware errors, especially if problems occur
before the HWRM interface is functioning. Attempt to map this
register if it is present and report the firmware status on firmware
init failures.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The allocator for the firmware health structure conflates allocation
and capability checks, limiting the reusability of the code. This patch
separates out the capability check and disablement and improves the
warning message to better describe the consequences of an allocation
failure.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Main changes is to extend hwrm_nvm_get_dev_info_output() for stored
firmware versions and a new flag is added to fw_status_reg.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn says:
====================
mv88e6xxx: Add per port devlink regions
This patchset extends devlink regions to support per port regions, and
them makes use of them to support the ports of the mv88e6xxx switches.
root@rap:~# devlink region show
mdio_bus/gpio-0:00/global1: size 64 snapshot []
mdio_bus/gpio-0:00/global2: size 64 snapshot []
mdio_bus/gpio-0:00/atu: size 49152 snapshot []
mdio_bus/gpio-0:00/0/port: size 64 snapshot []
mdio_bus/gpio-0:00/1/port: size 64 snapshot []
mdio_bus/gpio-0:00/2/port: size 64 snapshot []
mdio_bus/gpio-0:00/3/port: size 64 snapshot []
mdio_bus/gpio-0:00/4/port: size 64 snapshot []
mdio_bus/gpio-0:00/5/port: size 64 snapshot []
mdio_bus/gpio-0:00/6/port: size 64 snapshot []
mdio_bus/gpio-0:00/7/port: size 64 snapshot []
mdio_bus/gpio-0:00/8/port: size 64 snapshot []
mdio_bus/gpio-0:00/9/port: size 64 snapshot []
mdio_bus/gpio-0:00/10/port: size 64 snapshot []
root@rap:~# devlink region new mdio_bus/gpio-0:00/1/port snapshot 42
root@rap:~# devlink region dump mdio_bus/gpio-0:00/1/port snapshot 42
0000000000000000 4f 1e 3e 20 00 01 01 39 3f 05 00 00 fd 07 00 00
0000000000000010 80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 91
0000000000000020 00 00 00 00 00 00 00 00 00 00 00 00 22 00 00 00
0000000000000030 07 3e 00 00 00 00 00 80 00 00 00 00 00 00 5b 00
In order to support all ports of the switch, a new devlink flavour has
been added for unused ports:
mdio_bus/gpio-0:00/0: type notset flavour unused splittable false
mdio_bus/gpio-0:00/1: type notset flavour cpu port 1 splittable false
mdio_bus/gpio-0:00/2: type eth netdev red flavour physical port 2 splittable fae
mdio_bus/gpio-0:00/3: type eth netdev blue flavour physical port 3 splittable fe
mdio_bus/gpio-0:00/4: type eth netdev green flavour physical port 4 splittable e
mdio_bus/gpio-0:00/5: type notset flavour unused splittable false
mdio_bus/gpio-0:00/6: type notset flavour unused splittable false
mdio_bus/gpio-0:00/7: type notset flavour unused splittable false
mdio_bus/gpio-0:00/8: type eth netdev waic0 flavour physical port 8 splittable e
mdio_bus/gpio-0:00/9: type notset flavour unused splittable false
mdio_bus/gpio-0:00/10: type notset flavour unused splittable false
The DSA core now creates the devlink port instances earlier, so that
the driver setup function can make use of them.
v3:
Whitespace cleanup
Added justification for devlink unused flavour
Added Tested-by, Reviewed-by:
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a devlink region to return the per port registers.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hide away from DSA drivers how devlink works.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow DSA drivers to make use of devlink port regions, via simple
wrappers.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow regions to be registered to a devlink port. The same netlink API
is used, but the port index is provided to indicate when a region is a
port region as opposed to a device region.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA drivers want to create regions on devlink ports as well as the
devlink device instance, in order to export registers and other tables
per port. To keep all this code together in the drivers, have the
devlink ports registered early, so the setup() method can setup both
device and port devlink regions.
v3:
Remove dp->setup
Move common code out of switch statement.
Fix wrong goto
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a port is unused, still create a devlink port for it, but set the
flavour to unused. This allows us to attach devlink regions to the
port, etc.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all ports of a switch need to be used, particularly in embedded
systems. Add a port flavour for ports which physically exist in the
switch, but are not connected to the front panel etc, and so are
unused. By having unused ports present in devlink, it gives a more
accurate representation of the hardware. It also allows regions to be
associated to such ports, so allowing, for example, to determine
unused ports are correctly powered off, or to compare probable reset
defaults of unused ports to used ports experiences issues.
Actually registering unused ports and setting the flavour to unused is
optional. The DSA core will register all such switch ports, but such
ports are expected to be limited in number. Bigger ASICs may decide
not to list unused ports.
v2:
Expand the description about why it is useful
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Rename 'searched' column to 'clashres' in conntrack /proc/ stats
to amend a recent patch, from Florian Westphal.
2) Remove unused nft_data_debug(), from YueHaibing.
3) Remove unused definitions in IPVS, also from YueHaibing.
4) Fix user data memleak in tables and objects, this is also amending
a recent patch, from Jose M. Guisado.
5) Use nla_memdup() to allocate user data in table and objects, also
from Jose M. Guisado
6) User data support for chains, from Jose M. Guisado
7) Remove unused definition in nf_tables_offload, from YueHaibing.
8) Use kvzalloc() in ip_set_alloc(), from Vasily Averin.
9) Fix false positive reported by lockdep in nfnetlink mutexes,
from Florian Westphal.
10) Extend fast variant of cmp for neq operation, from Phil Sutter.
11) Implement fast bitwise variant, also from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A typical use of bitwise expression is to mask out parts of an IP
address when matching on the network part only. Optimize for this common
use with a fast variant for NFT_BITWISE_BOOL-type expressions operating
on 32bit-sized values.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a boolean indicating NFT_CMP_NEQ. To include it into the match
decision, it is sufficient to XOR it with the data comparison's result.
While being at it, store the mask that is calculated during expression
init and free the eval routine from having to recalculate it each time.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
From time to time there are lockdep reports similar to this one:
WARNING: possible circular locking dependency detected
------------------------------------------------------
000000004f61aa56 (&table[i].mutex){+.+.}, at: nfnl_lock [nfnetlink]
but task is already holding lock:
[..] (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid [nf_tables]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&net->nft.commit_mutex){+.+.}:
[..]
nf_tables_valid_genid+0x18/0x60 [nf_tables]
nfnetlink_rcv_batch+0x24c/0x620 [nfnetlink]
nfnetlink_rcv+0x110/0x140 [nfnetlink]
netlink_unicast+0x12c/0x1e0
[..]
sys_sendmsg+0x18/0x40
linux_sparc_syscall+0x34/0x44
-> #0 (&table[i].mutex){+.+.}:
[..]
nfnl_lock+0x24/0x40 [nfnetlink]
ip_set_nfnl_get_byindex+0x19c/0x280 [ip_set]
set_match_v1_checkentry+0x14/0xc0 [xt_set]
xt_check_match+0x238/0x260 [x_tables]
__nft_match_init+0x160/0x180 [nft_compat]
[..]
sys_sendmsg+0x18/0x40
linux_sparc_syscall+0x34/0x44
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&net->nft.commit_mutex);
lock(&table[i].mutex);
lock(&net->nft.commit_mutex);
lock(&table[i].mutex);
Lockdep considers this an ABBA deadlock because the different nfnl subsys
mutexes reside in the same lockdep class, but this is a false positive.
CPU1 table[i] refers to the nftables subsys mutex, whereas CPU1 locks
the ipset subsys mutex.
Yi Che reported a similar lockdep splat, this time between ipset and
ctnetlink subsys mutexes.
Time to place them in distinct classes to avoid these warnings.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently netadmin inside non-trusted container can quickly allocate
whole node's memory via request of huge ipset hashtable.
Other ipset-related memory allocations should be restricted too.
v2: fixed typo ALLOC -> ACCOUNT
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The MPTCP ADD_ADDR suboption with echo-flag=1 has no HMAC, the size is
smaller than the one initially sent without echo-flag=1. We then need to
use the correct size everywhere when we need this echo bit.
Before this patch, the wrong size was reserved but the correct amount of
bytes were written (and read): the remaining bytes contained garbage.
Fixes: 6a6c05a8b0 ("mptcp: send out ADD_ADDR with echo flag")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/95
Reported-and-tested-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no such property as duplex-full. It's called full-duplex. Leading to
reduced speed when using the example as base for a real device tree.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The unit address should be 1e, because the unit address is supposed
to be in hexadecimal.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a strictly cosmetic change that renames some macros in
sja1105_dynamic_config.c. They were copy-pasted in haste and this has
resulted in them having the driver prefix twice.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
net/sched: Add actions for MPLS L2 VPNs
This patch series adds the necessary TC actions for supporting layer 2
MPLS VPNs (VPLS).
The objective is to give the possibility to add an MPLS header right
before an skb's mac header, then to prepend this MPLS packet with a
new Ethernet header with the MAC address of the next hop.
Patch 1 implements the actions for adding and removing the external
Ethernet header.
Patch 2 adds the possibility to push an MPLS header before the mac
header.
Most of the code already exists as these operations were first
implemented in openvswitch.
Practical example, with encap on Host-A and decap on Host-B:
Host-A# tc filter add dev ethAx ingress matchall \
action mpls mac_push label 20 \
action vlan push_eth dst_mac 02:00:00:00:00:02 \
src_mac 02:00:00:00:00:01 \
action mirred egress redirect dev ethAy
Host-B# tc filter add dev ethBx ingress protocol mpls_uc \
flower mpls_label 20 mpls_bos 1 \
action vlan pop_eth \
action mpls pop proto teb \
action mirred egress redirect dev ethBy
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the MAC_PUSH action which pushes an MPLS LSE before the mac
header (instead of between the mac and the network headers as the
plain PUSH action does).
The only special case is when the skb has an offloaded VLAN. In that
case, it has to be inlined before pushing the MPLS header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to
respectively pop and push a base Ethernet header at the beginning of a
frame.
POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any,
must be stripped before calling POP_ETH.
PUSH_ETH is restricted to skbs with no mac_header, and only the MAC
addresses can be configured. The Ethertype is automatically set from
skb->protocol. These restrictions ensure that all skb's fields remain
consistent, so that this action can't confuse other part of the
networking stack (like GSO).
Since openvswitch already had these actions, consolidate the code in
skbuff.c (like for vlan and mpls push/pop).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the comparisons of u16 integers value and sopass_val with
less than zero for error checking is always false because the values
are unsigned. Fix this by making these variables int. This does not
affect the shift and mask operations performed on these variables
Addresses-Coverity: ("Unsigned compared against zero")
Fixes: 49fc23018e ("net: phy: dp83869: support Wake on LAN")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check for old hardware versions that did not have SMCDv2 support was
using suspicious pointer magic. Address the fields using an array.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building a CLC proposal message then the list of ISM devices does
not need to contain multiple devices that have the same chid value,
all these devices use the same function at the end.
Improve smc_find_ism_v2_device_clnt() to collect only ISM devices that
have unique chid values.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
===================
Add Seville Ethernet switch to T1040RDB
Seville is a DSA switch that is embedded inside the T1040 SoC, and
supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot.
This series adds this switch to the SoC's dtsi files and to the T1040RDB
board file.
I would like to send this series through net-next. There is no conflict
with other patches submitted to T1040 device tree. Maybe this could at
least get an ACK from devicetree maintainers.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the network interface names for the switch ports and hook them up
to the 2 QSGMII PHYs that are onboard.
A conscious decision was taken to go along with the numbers that are
written on the front panel of the board and not with the hardware
numbers of the switch chip ports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the description of the embedded L2 switch inside the SoC dtsi file
for NXP T1040.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The retransmission refactoring patch
686989700c ("tcp: simplify tcp_mark_skb_lost")
does not properly update the total lost packet counter which may
break the policer mode in BBR. This patch fixes it.
Fixes: 686989700c ("tcp: simplify tcp_mark_skb_lost")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
net/iucv: updates 2020-10-01
Just two (rare) patches, and both deal with smatch warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
