`dev->of_node` already has a reference to the device_node and calling
of_node_get on it is unnecessary. All conresponding calls to
of_node_put are also removed.
Signed-off-by: Shresth Prasad <shresthprasad7@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240502172121.8695-2-shresthprasad7@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The mp3309 has two configuration registers, named according to their
address (0x00 and 0x01).
In the second register (0x01), the bit DIMS (Dimming Mode Select) must
be always 0 (zero), in both analog (via I2C commands) and PWM dimming
mode.
In the initial driver version, the DIMS bit was set in PWM mode and
reset in analog mode.
But if the DIMS bit is set in pwm dimming mode and other devices are
connected on the same I2C bus, every I2C commands on the bus generates a
flickering on the LEDs powered by the mp3309c.
This change concerns the chip initialization and does not impact any
existing device-tree configuration.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240417153105.1794134-2-f.suligoi@asem.it
Signed-off-by: Lee Jones <lee@kernel.org>
Core in spi_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240327174714.519577-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The backlight driver supports getting passed platform data. However this
isn't used. This allows to remove quite some dead code from the driver
because bl->pdata is always NULL, and so bl->mode is always
LP8788_BL_REGISTER_ONLY.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240329133839.550065-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the lcd_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/2024032809-enchanted-conducive-3677@gregkh
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the backlight_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240305-class_cleanup-backlight-v1-1-c0e15cc25be1@marliere.net
Signed-off-by: Lee Jones <lee@kernel.org>
The "num_levels" variable is used to store error codes from
device_property_count_u32() so it needs to be signed. This doesn't
cause an issue at runtime because devm_kcalloc() won't allocate negative
sizes. However, it's still worth fixing.
Fixes: b54c828bdb ("backlight: mp3309c: Make use of device properties")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/74347f67-360d-4513-8939-595e3c4764fa@moroto.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-14-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-13-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-12-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-11-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-10-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-9-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-8-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-7-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-6-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-5-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-4-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-3-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-2-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
'struct lcd_ops' passed in lcd_device_register() is not modified by core
backlight code, so it can be made const for code safety. This allows
drivers to also define the structure as const.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-1-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Remove the field fb_blank from struct backlight_properties and remove
all code that still sets or reads it. Backlight blank status is now
tracked exclusively in struct backlight_properties.state.
The core backlight code keeps the fb_blank and state fields in sync,
but doesn't do anything else with fb_blank. Several drivers initialize
fb_blank to FB_BLANK_UNBLANK to enable the backlight. This is already
the default for the state field. So we can delete the fb_blank code
from core and drivers and rely on the state field.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240319093915.31778-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
The backlight is on for fb_blank eq FB_BLANK_UNBLANK, or off for
any other value in fb_blank. But the field fb_blank in struct
backlight_properties is deprecated and should not be used any
longer.
Replace the test for fb_blank in omap's backlight code with a
simple boolean parameter and push the test into the update_status
helper. Instead of reading fb_blank directly, decode the backlight
device's status with backlight_is_blank().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240319093915.31778-4-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
The callback set_power in struct omap_backlight_config is not
implemented anywhere. Remove it from the structure and driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240319093915.31778-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace check_fb with controls_device in struct backlight_ops. The
new callback interface takes a Linux device instead of a framebuffer.
Resolves one of the dependencies of backlight.h on fb.h.
The few drivers that had custom implementations of check_fb can easily
use the framebuffer's Linux device instead. Update them accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240305162425.23845-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
The internal check_fb callback from struct pwm_bl_data is never
implemented. The driver's implementation of check_fb always
returns true, which is the backlight core's default if no
implementation has been set. So remove the code from the driver.
v2:
* reword commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240305162425.23845-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
The driver's implementation of check_fb always returns true, which
is the default if no implementation has been set. So remove the code
from the driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240305162425.23845-6-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Framebuffer drivers for devices with dedicated backlight are supposed
to set struct fb_info.bl_dev to the backlight's respective device. Use
the value to match backlight and framebuffer in the backlight core code.
The code first tests against struct backlight_ops.check_ops. If this
test succeeds, it performs the test against fbdev. So backlight drivers
can override the later test as before.
Fbdev's backlight support depends on CONFIG_FB_BACKLIGHT. To avoid
ifdef in the code, the new helper fb_bl_device() returns the backlight
device, or NULL if the config option has been disabled. The test in
the backlight code will then do nothing.
v4:
* declare empty fb_bl_device() as static inline
* export fb_bl_device()
v3:
* hide ifdef in fb_bl_device() (Lee)
* no if-else blocks (Andy)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240305162425.23845-2-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Core code already prints detailed information about failure of memory
allocation.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240305-backlight-probe-v2-7-609b0cf24bde@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Code can be simpler: return directly when devm_gpiod_get_optional()
failed.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240305-backlight-probe-v2-6-609b0cf24bde@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Don't pollute dmesg on deferred probe and simplify the code with
dev_err_probe().
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240305-backlight-probe-v2-5-609b0cf24bde@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Don't pollute dmesg on deferred probe and simplify the code with
dev_err_probe().
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240305-backlight-probe-v2-4-609b0cf24bde@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Don't pollute dmesg on deferred probe and simplify the code with
dev_err_probe().
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240305-backlight-probe-v2-3-609b0cf24bde@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240305-backlight-probe-v2-2-609b0cf24bde@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240305-backlight-probe-v2-1-609b0cf24bde@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!
Fixes: c5a51053cf ("backlight: add new lp8788 backlight driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-4-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!
Fixes: 0f59858d51 ("backlight: add new lm3639 backlight driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-3-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!
Fixes: 6ede3d832a ("backlight: add driver for DA9052/53 PMIC v1")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-2-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
As per documentation "drivers are expected to use this function in their
update_status() operation to get the brightness value.".
With this we can also drop the manual backlight_is_blank() handling
since backlight_get_brightness() is already handling this correctly.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-3-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
There's no need to set bl->props.brightness, the get_brightness function
is just supposed to return the current brightness and not touch the
struct.
With that done we can also remove the 'goto out' and just return the
value.
Fixes: 0c2a665a64 ("backlight: add Backlight driver for lm3630 chip")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-2-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
The backlight_properties struct should be initialized to zero before
using, otherwise there will be some random values in the struct.
Fixes: 0c2a665a64 ("backlight: add Backlight driver for lm3630 chip")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-1-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
props is stack allocated and, although this driver initializes all the
fields that are not "owned" by the framework, we'd still like to ensure
it is zeroed to avoid problems from this driver if the fields change.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-5-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
We have a temporary variable to keep pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20240208184313.2224579-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Replace dev_err() with dev_err_probe().
This helps in simplifing code and standardizing the error output.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240208184313.2224579-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240208184313.2224579-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
We have a temporary variable to keep pointer to struct device.
Utilise it inside the ->probe() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240201144951.294215-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Simplify the error handling in probe function by switching from
dev_err() to dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240201144951.294215-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Move OF table near to the user.
While at it, drop comma at terminator entry.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240201144951.294215-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
