The statement which decides if an extent allocation on a zoned device is
for the dedicated tree-log block group or not and if we can use the block
group we picked for this allocation is not easy to read but an important
part of the allocator.
Rewrite into an if condition instead of a plain boolean test to make it
stand out more, like the version which tests for the dedicated
data-relocation block group.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs code we have two functions called setup_extent_mapping, one in
the extent_map code and one in the relocation code. While both are
private to their respective implementation, this can still be confusing
for the reader.
So rename the version in relocation.c to setup_relocation_extent_mapping.
No functional changes.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we use a dedicated block group and regular writes for data
relocation, we can preallocate the space needed for a relocated inode,
just like we do in regular mode.
Essentially this reverts commit 32430c6148 ("btrfs: zoned: enable
relocation on a zoned filesystem") as it is not needed anymore.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prepare for allowing preallocation for relocation inodes.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have a dedicated block group for relocation, we can use
REQ_OP_WRITE instead of REQ_OP_ZONE_APPEND for writing out the data on
relocation.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Don't allow more than one process to add pages to a relocation inode on
a zoned filesystem, otherwise we cannot guarantee the sequential write
rule once we're filling preallocated extents on a zoned filesystem.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Relocation in a zoned filesystem can fail with a transaction abort with
error -22 (EINVAL). This happens because the relocation code assumes that
the extents we relocated the data to have the same size the source extents
had and ensures this by preallocating the extents.
But in a zoned filesystem we currently can't preallocate the extents as
this would break the sequential write required rule. Therefore it can
happen that the writeback process kicks in while we're still adding pages
to a delalloc range and starts writing out dirty pages.
This then creates destination extents that are smaller than the source
extents, triggering the following safety check in get_new_location():
1034 if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
1035 ret = -EINVAL;
1036 goto out;
1037 }
Temporarily create a dedicated block group for the relocation process, so
no non-relocation data writes can interfere with the relocation writes.
This is needed that we can switch the relocation process on a zoned
filesystem from the REQ_OP_ZONE_APPEND writing we use for data to a scheme
like in a non-zoned filesystem using REQ_OP_WRITE and preallocation.
Fixes: 32430c6148 ("btrfs: zoned: enable relocation on a zoned filesystem")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several places in our codebase where we check if a root is the
root of the data reloc tree and subsequent patches will introduce more.
Factor out the check into a small helper function instead of open coding
it multiple times.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function repair_io_failure() is no longer used out of extent_io.c since
commit 8b9b6f2554 ("btrfs: scrub: cleanup the remaining nodatasum
fixup code"), which removes the last external caller.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a regular file in full sync mode, we are currently committing
its delayed inode item. This is to ensure that we never miss copying the
inode item, with its most up to date data, into the log tree.
However that is not necessary since commit e4545de5b0 ("Btrfs: fix fsync
data loss after append write"), because even if we don't find the leaf
with the inode item when looking for leaves that changed in the current
transaction, we end up logging the inode item later using the in-memory
content. In case we find the leaf containing the inode item, we already
end up using the in-memory inode for filling the inode item in the log
tree, and not the inode item that is in the fs/subvolume tree, as it
might be not up to date (copy_items() -> fill_inode_item()).
So don't commit the delayed inode item, which brings a couple of benefits:
1) Avoid writing the inode item to the fs/subvolume btree, saving time and
reducing lock contention on the btree;
2) In case no other item for the inode was changed, added or deleted in
the same leaf where the inode item is located, we ended up copying
all the items in that leaf to the log tree - it's harmless from a
functional point of view, but it wastes time and log tree space.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 10/10 and the following test results compare a branch with
the whole patch set applied versus a branch without any of the patches
applied.
The following script was used to test dbench with 8 and 16 jobs on a
machine with 12 cores, 64G of RAM, a NVME device and using a non-debug
kernel config (Debian's default):
$ cat test.sh
#!/bin/bash
if [ $# -ne 1 ]; then
echo "Use $0 NUM_JOBS"
exit 1
fi
NUM_JOBS=$1
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-m single -d single"
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 120 $NUM_JOBS
umount $MNT
The results were the following:
8 jobs, before patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4113896 0.009 238.665
Close 3021699 0.001 0.590
Rename 174215 0.082 238.733
Unlink 830977 0.049 238.642
Deltree 96 2.232 8.022
Mkdir 48 0.003 0.005
Qpathinfo 3729013 0.005 2.672
Qfileinfo 653206 0.001 0.152
Qfsinfo 683866 0.002 0.526
Sfileinfo 335055 0.004 1.571
Find 1441800 0.016 4.288
WriteX 2049644 0.010 3.982
ReadX 6449786 0.003 0.969
LockX 13400 0.002 0.043
UnlockX 13400 0.001 0.075
Flush 288349 2.521 245.516
Throughput 1075.73 MB/sec 8 clients 8 procs max_latency=245.520 ms
8 jobs, after patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4154282 0.009 156.675
Close 3051450 0.001 0.843
Rename 175912 0.072 4.444
Unlink 839067 0.048 66.050
Deltree 96 2.131 5.979
Mkdir 48 0.002 0.004
Qpathinfo 3765575 0.005 3.079
Qfileinfo 659582 0.001 0.099
Qfsinfo 690474 0.002 0.155
Sfileinfo 338366 0.004 1.419
Find 1455816 0.016 3.423
WriteX 2069538 0.010 4.328
ReadX 6512429 0.003 0.840
LockX 13530 0.002 0.078
UnlockX 13530 0.001 0.051
Flush 291158 2.500 163.468
Throughput 1105.45 MB/sec 8 clients 8 procs max_latency=163.474 ms
+2.7% throughput, -40.1% max latency
16 jobs, before patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5457602 0.033 337.098
Close 4008979 0.002 2.018
Rename 231051 0.323 254.054
Unlink 1102209 0.202 337.243
Deltree 160 6.521 31.720
Mkdir 80 0.003 0.007
Qpathinfo 4946147 0.014 6.988
Qfileinfo 867440 0.001 1.642
Qfsinfo 907081 0.003 1.821
Sfileinfo 444433 0.005 2.053
Find 1912506 0.067 7.854
WriteX 2724852 0.018 7.428
ReadX 8553883 0.003 2.059
LockX 17770 0.003 0.350
UnlockX 17770 0.002 0.627
Flush 382533 2.810 353.691
Throughput 1413.09 MB/sec 16 clients 16 procs max_latency=353.696 ms
16 jobs, after patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5393156 0.034 303.181
Close 3961986 0.002 1.502
Rename 228359 0.320 253.379
Unlink 1088920 0.206 303.409
Deltree 160 6.419 30.088
Mkdir 80 0.003 0.004
Qpathinfo 4887967 0.015 7.722
Qfileinfo 857408 0.001 1.651
Qfsinfo 896343 0.002 2.147
Sfileinfo 439317 0.005 4.298
Find 1890018 0.073 8.347
WriteX 2693356 0.018 6.373
ReadX 8453485 0.003 3.836
LockX 17562 0.003 0.486
UnlockX 17562 0.002 0.635
Flush 378023 2.802 315.904
Throughput 1454.46 MB/sec 16 clients 16 procs max_latency=315.910 ms
+2.9% throughput, -11.3% max latency
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging an extent, in the fast fsync path, we always attempt do drop
or trim any existing extents with a range that match or overlap the range
of the extent we are about to log. We do that through a call to
btrfs_drop_extents().
However this is not needed when we are logging the inode for the first
time in the current transaction, since we have no inode items of the
inode in the log tree. Calling btrfs_drop_extents() does a deletion search
on the log tree, which is expensive when we have concurrent tasks
accessing the log tree because a deletion search always acquires a write
lock on the extent buffers at levels 2, 1 and 0, adding significant lock
contention, specially taking into account the height of a log tree rarely
(if ever) goes beyond 2 or 3, due to its short life.
So skip the call to btrfs_drop_extents() when the inode was not previously
logged in the current transaction.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 9/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we are logging that an inode exists and the inode was not logged
before, we can avoid searching in the log tree for the inode item since we
know it does not exists. That wastes time and adds more lock contention on
the extent buffers of the log tree when there are other tasks that are
logging other inodes.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 8/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whenever we are logging a file inode in full sync mode we call
btrfs_truncate_inode_items() to delete items of the inode we may have
previously logged.
That results in doing a btree search for deletion, which is expensive
because it always acquires write locks for extent buffers at levels 2, 1
and 0, and it balances any node that is less than half full. Acquiring
the write locks can block the task if the extent buffers are already
locked by another task or block other tasks attempting to lock them,
which is specially bad in case of log trees since they are small due to
their short life, with a root node at a level typically not greater than
level 2.
If we know that we are logging the inode for the first time in the current
transaction, we can skip the call to btrfs_truncate_inode_items(), avoiding
the deletion search. This change does that.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 7/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the call to btrfs_truncate_inode_items(), and the surrounding retry
loop, into a local helper function. This avoids some repetition and avoids
making the next change a bit awkward due to a bit of too much indentation.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 6/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whenever we are logging a directory inode, logging that an inode exists or
logging an inode that has changes in its references or xattrs, we attempt
to delete items of this inode we may have previously logged (through calls
to drop_objectid_items()).
That attempt does a btree search for deletion, which is expensive because
it always acquires write locks for extent buffers at levels 2, 1 and 0,
and it balances any node that is less than half full. Acquiring the write
locks can block the task if the extent buffers are already locked or block
other tasks attempting to lock them, which is specially bad in case of log
trees since they are small due to their short life, with a root node at a
level typically not greater than level 2.
If we know that we are logging the inode for the first time in the current
transaction, we can skip the search. This change does that.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 5/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we are logging a new name for an inode, due to a link or rename
operation, if the inode has ancestor inodes that are new, created in the
current transaction, we need to log that these inodes exist. To ensure
that a subsequent explicit fsync on one of these ancestor inodes does
sync the log, we don't set the logged_trans field of these inodes.
This was done in commit 75b463d2b4 ("btrfs: do not commit logs and
transactions during link and rename operations"), to avoid syncing a
log after a rename or link operation.
In order to allow for future changes to do some optimizations, change
this behaviour to always update the logged_trans of any logged inode
and don't update the last_log_commit of the inode if we are logging
that it exists. This accomplishes that same objective with simpler
logic, allowing for some optimizations in the next patches.
So just do that simplification.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 4/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a new name for an inode, due to a link or rename operation,
we don't need to log all new dentries of the parent directories and their
subdirectories. We only want to log the names of the inode and that any
new parent directories exist. So in this case don't trigger logging of
the new dentries, that is only need when doing an explicit fsync on a
directory or on a file which requires logging its parent directories.
This avoids unnecessary work and reduces contention on the extent buffers
of a log tree.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 3/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 75b463d2b4 ("btrfs: do not commit logs and transactions
during link and rename operations"), we always pass a non-NULL log context
to btrfs_log_inode_parent() and therefore to all the functions that it
calls. So remove the checks we have all over the place that test for a
NULL log context, making the code shorter and easier to read, as well as
reducing the size of the generated code.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 2/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In case an inode was never logged since it was loaded from disk and was
modified in the current transaction (its ->last_trans matches the ID of
the current transaction), inode_logged() returns true even if there's no
existing log tree. In this case we can simply check if a log tree exists
and return false if it does not. This avoids a caller of inode_logged()
doing some unnecessary, but harmless, work.
For btrfs_log_new_name() it avoids it logging an inode in case it was
never logged since it was loaded from disk and there is currently no log
tree for the inode's root. For the remaining callers of inode_logged(),
btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log(), it has
no effect since they already check if a log tree exists through their
calls to join_running_log_trans().
So just add a check to inode_logged() to verify if a log tree exists, and
return false if it does not.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 1/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There were few lockdep warnings because btrfs_show_devname() was using
device_list_mutex as recorded in the commits:
0ccd05285e ("btrfs: fix a possible umount deadlock")
779bf3fefa ("btrfs: fix lock dep warning, move scratch dev out of device_list_mutex and uuid_mutex")
And finally, commit 88c14590cd ("btrfs: use RCU in btrfs_show_devname
for device list traversal") removed the device_list_mutex from
btrfs_show_devname for performance reasons.
This patch removes a stale comment about the function
btrfs_show_devname and device_list_mutex.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The test case btrfs/238 reports the warning below:
WARNING: CPU: 3 PID: 481 at fs/btrfs/super.c:2509 btrfs_show_devname+0x104/0x1e8 [btrfs]
CPU: 2 PID: 1 Comm: systemd Tainted: G W O 5.14.0-rc1-custom #72
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
btrfs_show_devname+0x108/0x1b4 [btrfs]
show_mountinfo+0x234/0x2c4
m_show+0x28/0x34
seq_read_iter+0x12c/0x3c4
vfs_read+0x29c/0x2c8
ksys_read+0x80/0xec
__arm64_sys_read+0x28/0x34
invoke_syscall+0x50/0xf8
do_el0_svc+0x88/0x138
el0_svc+0x2c/0x8c
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x198/0x19c
Reason:
While btrfs_prepare_sprout() moves the fs_devices::devices into
fs_devices::seed_list, the btrfs_show_devname() searches for the devices
and found none, leading to the warning as in above.
Fix:
latest_dev is updated according to the changes to the device list.
That means we could use the latest_dev->name to show the device name in
/proc/self/mounts, the pointer will be always valid as it's assigned
before the device is deleted from the list in remove or replace.
The RCU protection is sufficient as the device structure is freed after
synchronization.
Reported-by: Su Yue <l@damenly.su>
Tested-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation to fix a bug in btrfs_show_devname().
Convert fs_devices::latest_bdev type from struct block_device to struct
btrfs_device and, rename the member to fs_devices::latest_dev.
So that btrfs_show_devname() can use fs_devices::latest_dev::name.
Tested-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We will no longer write to a relocating block group. So, we can finish it
now.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have written to the zone capacity, the device automatically
deactivates the zone. Sync up block group side (the active BG list and
zone_is_active flag) with it.
We need to do it both on data BGs and metadata BGs. On data side, we add a
hook to btrfs_finish_ordered_io(). On metadata side, we use
end_extent_buffer_writeback().
To reduce excess lookup of a block group, we mark the last extent buffer in
a block group with EXTENT_BUFFER_ZONE_FINISH flag. This cannot be done for
data (ordered_extent), because the address may change due to
REQ_OP_ZONE_APPEND.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current extent allocator tries to allocate a new block group when the
existing block groups do not have enough space. On a ZNS device, a new
block group means a new active zone. If the number of active zones has
already reached the max_active_zones, activating a new zone needs to finish
an existing zone, leading to wasting the free space there.
So, instead, it should reuse the existing active block groups as much as
possible when we can't activate any other zones without sacrificing an
already activated block group.
While at it, I converted find_free_extent_update_loop() to check the
found_extent() case early and made the other conditions simpler.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are passing too many variables as it is from btrfs_reserve_extent() to
find_free_extent(). The next commit will add min_alloc_size to ffe_ctl, and
that means another pass-through argument. Take this opportunity to move
ffe_ctl one level up and drop the redundant arguments.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Activate new block group at btrfs_make_block_group(). We do not check the
return value. If failed, we can try again later at the actual extent
allocation phase.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Activate a block group when trying to allocate an extent from it. We check
read-only case and no space left case before trying to activate a block
group not to consume the number of active zones uselessly.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Load activeness of underlying zones of a block group. When underlying zones
are active, we add the block group to the fs_info->zone_active_bgs list.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add zone_is_active flag to btrfs_block_group. This flag indicates the
underlying zones are all active. Such zone active block groups are tracked
by fs_info->active_bg_list.
btrfs_dev_{set,clear}_active_zone() take responsibility for the underlying
device part. They set/clear the bitmap to indicate zone activeness and
count the number of zones we can activate left.
btrfs_zone_{activate,finish}() take responsibility for the logical part and
the list management. In addition, btrfs_zone_finish() wait for any writes
on it and send REQ_OP_ZONE_FINISH to the zone.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We will use a block group's physical location to track active zones and
finish fully written zones in the following commits. Since the zone
activation is done in the extent allocation context which already holding
the tree locks, we can't query the chunk tree for the physical locations.
So, copy the location info into a block group and use it for activation.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ZNS specification defines a limit on the number of zones that can be in
the implicit open, explicit open or closed conditions. Any zone with such
condition is defined as an active zone and correspond to any zone that is
being written or that has been only partially written. If the maximum
number of active zones is reached, we must either reset or finish some
active zones before being able to chose other zones for storing data.
Load queue_max_active_zones() and track the number of active zones left on
the device.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If there is no more space left for a new superblock in a superblock zone,
then it is better to ZONE_FINISH the zone and frees up the active zone
count.
Since btrfs_advance_sb_log() can now issue REQ_OP_ZONE_FINISH, we also need
to convert it to return int for the error case.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
sb_write_pointer() returns the write position of next superblock. For READ,
we need a previous location. When the pointer is at the head, the previous
one is the last one of the other zone. Calculate the last one's position
from zone capacity.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot write beyond zone capacity. So, we should consider a zone as
"full" when the write pointer goes beyond capacity - the size of super
info.
Also, take this opportunity to replace a subtle duplicated code with a loop
and fix a typo in comment.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the introduction of zone capacity, the range [capacity, length] is
always zone unusable. Counting this region as a reclaim target will
cause reclaiming too early. Reclaim block groups based on bytes that can
be usable after resetting.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we introduced capacity in a block group, we need to calculate free
space using the capacity instead of the length. Thus, bytes we account
capacity - alloc_pointer as free, and account bytes [capacity, length] as
zone unusable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_free_excluded_extents() is not neccessary for
btrfs_calc_zone_unusable() and it makes btrfs_calc_zone_unusable()
difficult to reuse. Move it out and call btrfs_free_excluded_extents()
in proper context.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ZNS specification introduces the concept of a Zone Capacity. A zone
capacity is an additional per-zone attribute that indicates the number of
usable logical blocks within each zone, starting from the first logical
block of each zone. It is always smaller or equal to the zone size.
With the SINGLE profile, we can set a block group's "capacity" as the same
as the underlying zone's Zone Capacity. We will limit the allocation not
to exceed in a following commit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the new infrastructure which has taken subpage into consideration,
now we should be safe to allow defrag to work for subpage case.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now the old infrastructure can all be removed, defrag
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function defrag_one_cluster() is able to defrag one range well
enough, we only need to do preparation for it, including:
- Clamp and align the defrag range
- Exclude invalid cases
- Proper inode locking
The old infrastructures will not be removed in this patch, as it would
be too noisy to review.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new helper, defrag_one_cluster(), will defrag one cluster (at most
256K):
- Collect all initial targets
- Kick in readahead when possible
- Call defrag_one_range() on each initial target
With some extra range clamping.
- Update @sectors_defragged parameter
This involves one behavior change, the defragged sectors accounting is
no longer as accurate as old behavior, as the initial targets are not
consistent.
We can have new holes punched inside the initial target, and we will
skip such holes later.
But the defragged sectors accounting doesn't need to be that accurate
anyway, thus I don't want to pass those extra accounting burden into
defrag_one_range().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A new helper, defrag_one_range(), is introduced to defrag one range.
This function will mostly prepare the needed pages and extent status for
defrag_one_locked_target().
As we can only have a consistent view of extent map with page and extent
bits locked, we need to re-check the range passed in to get a real
target list for defrag_one_locked_target().
Since defrag_collect_targets() will call defrag_lookup_extent() and lock
extent range, we also need to teach those two functions to skip extent
lock. Thus new parameter, @locked, is introduced to skip extent lock if
the caller has already locked the range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A new helper, defrag_one_locked_target(), introduced to do the real part
of defrag.
The caller needs to ensure both page and extents bits are locked, and no
ordered extent exists for the range, and all writeback is finished.
The core defrag part is pretty straight-forward:
- Reserve space
- Set extent bits to defrag
- Update involved pages to be dirty
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a helper, defrag_collect_targets(), to collect all possible
targets to be defragged.
This function will not consider things like max_sectors_to_defrag, thus
caller should be responsible to ensure we don't exceed the limit.
This function will be the first stage of later defrag rework.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In cluster_pages_for_defrag(), we have complex code block inside one
for() loop.
The code block is to prepare one page for defrag, this will ensure:
- The page is locked and set up properly.
- No ordered extent exists in the page range.
- The page is uptodate.
This behavior is pretty common and will be reused by later defrag
rework.
So factor out the code into its own helper, defrag_prepare_one_page(),
for later usage, and cleanup the code by a little.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When testing subpage defrag support, I always find some strange inode
nbytes error, after a lot of debugging, it turns out that
defrag_lookup_extent() is using PAGE_SIZE as size for
lookup_extent_mapping().
Since lookup_extent_mapping() is calling __lookup_extent_mapping() with
@strict == 1, this means any extent map smaller than one page will be
ignored, prevent subpage defrag to grab a correct extent map.
There are quite some PAGE_SIZE usage in ioctl.c, but most of them are
correct usages, and can be one of the following cases:
- ioctl structure size check
We want ioctl structure to be contained inside one page.
- real page operations
The remaining cases in defrag_lookup_extent() and
check_defrag_in_cache() will be addressed in this patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function cluster_pages_for_defrag() we have a window where we unlock
page, either start the ordered range or read the content from disk.
When we re-lock the page, we need to make sure it still has the correct
page->private for subpage.
Thus add the extra PagePrivate check here to handle subpage cases
properly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
