In order to add an iteration -1 to indicate that the memory population
phase has not yet completed, convert the interations counters to ints.
No functional change intended.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu pointed out that a log message printed while waiting for the
memory population phase of the dirty_log_perf_test will flood the debug
logs as there is no delay after printing the message. Since the message
does not provide much value anyway, remove it.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In response to some earlier comments from Peter Xu, rename
timespec_diff_now to the much more sensible timespec_elapsed.
No functional change intended.
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Makarand Sonare <makarandsonare@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210112214253.463999-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a guest is using xAPIC KVM allocates a backing page for the required
EPT entry for the APIC access address set in the VMCS. If mm decides to
move that page the KVM mmu notifier will update the VMCS with the new
HPA. This test induces a page move to test that APIC access continues to
work correctly. It is a directed test for
commit e649b3f018 "KVM: x86: Fix APIC page invalidation race".
Tested: ran for 1 hour on a skylake, migrating backing page every 1ms
Depends on patch "selftests: kvm: Add exception handling to selftests"
from aaronlewis@google.com that has not yet been queued.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20201105223823.850068-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's not conventional C to put non-inline functions in header
files. Create a source file for the functions instead. Also
reduce the amount of globals and rename the functions to
something less generic.
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201218141734.54359-4-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201218141734.54359-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
demand_paging_test, dirty_log_test, and dirty_log_perf_test have
redundant guest mode code. Factor it out.
Also, while adding a new include, remove the ones we don't need.
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201218141734.54359-2-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
-----BEGIN PGP SIGNATURE-----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=hf4L
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.11
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
The selftest even triggers a non-critical bug that is unrelated
to diag318, fix will follow later.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hT2c
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and Test for 5.11
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
The selftest even triggers a non-critical bug that is unrelated
to diag318, fix will follow later.
Both user_msr_test and userspace_msr_exit_test tests the functionality
of kvm_msr_filter. Instead of testing this feature in two tests, merge
them together, so there is only one test for this feature.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201204172530.2958493-1-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a selftest to test that when the ioctl KVM_X86_SET_MSR_FILTER is
called with an MSR list, those MSRs exit to userspace.
This test uses 3 MSRs to test this:
1. MSR_IA32_XSS, an MSR the kernel knows about.
2. MSR_IA32_FLUSH_CMD, an MSR the kernel does not know about.
3. MSR_NON_EXISTENT, an MSR invented in this test for the purposes of
passing a fake MSR from the guest to userspace. KVM just acts as a
pass through.
Userspace is also able to inject a #GP. This is demonstrated when
MSR_IA32_XSS and MSR_IA32_FLUSH_CMD are misused in the test. When this
happens a #GP is initiated in userspace to be thrown in the guest which is
handled gracefully by the exception handling framework introduced earlier
in this series.
Tests for the generic instruction emulator were also added. For this to
work the module parameter kvm.force_emulation_prefix=1 has to be enabled.
If it isn't enabled the tests will be skipped.
A test was also added to ensure the MSR permission bitmap is being set
correctly by executing reads and writes of MSR_FS_BASE and MSR_GS_BASE
in the guest while alternating which MSR userspace should intercept. If
the permission bitmap is being set correctly only one of the MSRs should
be coming through at a time, and the guest should be able to read and
write the other one directly.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-5-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DIAGNOSE 0x0318 instruction, unique to s390x, is a privileged call
that must be intercepted via SIE, handled in userspace, and the
information set by the instruction is communicated back to KVM.
To test the instruction interception, an ad-hoc handler is defined which
simply has a VM execute the instruction and then userspace will extract
the necessary info. The handler is defined such that the instruction
invocation occurs only once. It is up to the caller to determine how the
info returned by this handler should be used.
The diag318 info is communicated from userspace to KVM via a sync_regs
call. This is tested during a sync_regs test, where the diag318 info is
requested via the handler, then the info is stored in the appropriate
register in KVM via a sync registers call.
If KVM does not support diag318, then the tests will print a message
stating that diag318 was skipped, and the asserts will simply test
against a value of 0.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Link: https://lore.kernel.org/r/20201207154125.10322-1-walling@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The current memory region move test correctly handles the situation that
the second (realigning) memslot move operation would temporarily trigger
MMIO until it completes, however it does not handle the case in which the
first (misaligning) move operation does this, too.
This results in false test assertions in case it does so.
Fix this by handling temporary MMIO from the first memslot move operation
in the test guest code, too.
Fixes: 8a0639fe92 ("KVM: sefltests: Add explicit synchronization to move mem region test")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <0fdddb94bb0e31b7da129a809a308d91c10c0b5e.1606941224.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DEMUX register presence depends on the host's hardware (the
CLIDR_EL1 register to be precise). This means there's no set
of them that we can bless and that it's possible to encounter
new ones when running on different hardware (which would
generate "Consider adding them ..." messages, but we'll never
want to add them.)
Remove the ones we have in the blessed list and filter them
out of the new list, but also provide a new command line switch
to list them if one so desires.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201126134641.35231-3-drjones@redhat.com
Almost all tests do this anyway and the ones that don't don't
appear to care. Only vmx_set_nested_state_test assumes that
a feature (VMX) is disabled until later setting the supported
CPUIDs. It's better to disable that explicitly anyway.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-11-drjones@redhat.com>
[Restore CPUID_VMX, or vmx_set_nested_state breaks. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-12-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-10-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new vm_create variants that also takes a number of vcpus,
an amount of per-vcpu pages, and optionally a list of vcpuids. These
variants will create default VMs with enough additional pages to
cover the vcpu stacks, per-vcpu pages, and pagetable pages for all.
The new 'default' variant uses VM_MODE_DEFAULT, whereas the other
new variant accepts the mode as a parameter.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-6-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code is almost 100% the same anyway. Just move it to common
and add a few arch-specific macros.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201111122636.73346-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing sets USE_CLEAR_DIRTY_LOG anymore, so anything it surrounds
is dead code.
However, it is the recommended way to use the dirty page bitmap
for new enough kernel, so use it whenever KVM has the
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 capability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's only used to override the existing dirty ring size/count. If
with a bigger ring count, we test async of dirty ring. If with a
smaller ring count, we test ring full code path. Async is default.
It has no use for non-dirty-ring tests.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012241.6208-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously the dirty ring test was working in synchronous way, because
only with a vmexit (with that it was the ring full event) we'll know
the hardware dirty bits will be flushed to the dirty ring.
With this patch we first introduce a vcpu kick mechanism using SIGUSR1,
which guarantees a vmexit and also therefore the flushing of hardware
dirty bits. Once this is in place, we can keep the vcpu dirty work
asynchronous of the whole collection procedure now. Still, we need
to be very careful that when reaching the ring buffer soft limit
(KVM_EXIT_DIRTY_RING_FULL) we must collect the dirty bits before
continuing the vcpu.
Further increase the dirty ring size to current maximum to make sure
we torture more on the no-ring-full case, which should be the major
scenario when the hypervisors like QEMU would like to use this feature.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012239.6159-1-peterx@redhat.com>
[Use KVM_SET_SIGNAL_MASK+sigwait instead of a signal handler. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the initial dirty ring buffer test.
The current test implements the userspace dirty ring collection, by
only reaping the dirty ring when the ring is full.
So it's still running synchronously like this:
vcpu main thread
1. vcpu dirties pages
2. vcpu gets dirty ring full
(userspace exit)
3. main thread waits until full
(so hardware buffers flushed)
4. main thread collects
5. main thread continues vcpu
6. vcpu continues, goes back to 1
We can't directly collects dirty bits during vcpu execution because
otherwise we can't guarantee the hardware dirty bits were flushed when
we collect and we're very strict on the dirty bits so otherwise we can
fail the future verify procedure. A follow up patch will make this
test to support async just like the existing dirty log test, by adding
a vcpu kick mechanism.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012237.6111-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a hook for the checks after vcpu_run() completes. Preparation
for the dirty ring test because we'll need to take care of another
exit reason.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012235.6063-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_HV_CPUID is now supported as both vCPU and VM ioctl,
test that.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200929150944.1235688-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend the KVM_SET_SREGS test to verify that all supported CR4 bits, as
enumerated by KVM, can be set before KVM_SET_CPUID2, i.e. without first
defining the vCPU model. KVM is supposed to skip guest CPUID checks
when host userspace is stuffing guest state.
Check the inverse as well, i.e. that KVM rejects KVM_SET_REGS if CR4
has one or more unsupported bits set.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201007014417.29276-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even though one iteration is not enough for the dirty log performance
test (due to the cost of building page tables, zeroing memory etc.)
two is okay and it is the default. Without this patch,
"./dirty_log_perf_test" without any further arguments fails.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dirty log perf test will time verious dirty logging operations
(enabling dirty logging, dirtying memory, getting the dirty log,
clearing the dirty log, and disabling dirty logging) in order to
quantify dirty logging performance. This test can be used to inform
future performance improvements to KVM's dirty logging infrastructure.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We also check the input number of vcpus against the maximum supported.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-8-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vcpu_memory_bytes to something with "percpu" in it
in order to be less ambiguous. Also make it global to
simplify things.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-7-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201104212357.171559-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrfract will be used by the dirty logging perf test introduced later in
this series to dirty memory sparsely.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function to get the current time and return the time since
a given start time. Use that function to simplify the timekeeping in the
demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rounding the address the guest writes to a host page boundary
will only have an effect if the host page size is larger than the guest
page size, but in that case the guest write would still go to the same
host page. There's no reason to round the address down, so remove the
rounding to simplify the demand paging test.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Much of the code in demand_paging_test can be reused by other, similar
multi-vCPU-memory-touching-perfromance-tests. Factor that common code
out for reuse.
No functional change expected.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the clear_dirty_log test, instead merge it into the existing
dirty_log_test. It should be cleaner to use this single binary to do
both tests, also it's a preparation for the upcoming dirty ring test.
The default behavior will run all the modes in sequence.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012233.6013-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG
would overwrite it the next time it copies the dirty log onto it.
In the upcoming dirty ring tests we'll start to fetch dirty pages from
a ring buffer, so no one is going to clear the dirty bitmap for us.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012228.5916-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SVE registers to get-reg-list and create a
new test, get-reg-list-sve, which tests them when running on a
machine with SVE support.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for KVM_GET_REG_LIST regressions. The blessed list was
created by running on v4.15 with the --core-reg-fixup option.
The following script was also used in order to annotate system
registers with their names when possible. When new system
registers are added the names can just be added manually using
the same grep.
while read reg; do
if [[ ! $reg =~ ARM64_SYS_REG ]]; then
printf "\t$reg\n"
continue
fi
encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//")
if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then
printf "\t$reg\n"
continue
fi
name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//")
printf "\t$reg\t/* $name */\n"
done < <(aarch64/get-reg-list --core-reg-fixup --list)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a set of tests that ensure the guest cannot access paravirtual msrs
and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf.
Expect a #GP in the case of msr accesses and -KVM_ENOSYS from
hypercalls.
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201027231044.655110-7-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the infrastructure needed to enable exception handling in selftests.
This allows any of the exception and interrupt vectors to be overridden
in the guest.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure the out value 'uc' in get_ucall() is properly reporting
UCALL_NONE if the call fails. The return value will be correctly
reported, however, the out parameter 'uc' will not be. Clear the struct
to ensure the correct value is being reported in the out parameter.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added
later in this series relies on this and crashes if this layout is not
correct.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unless we want to test with THP, then we shouldn't require it to be
configured by the host kernel. Unfortunately, even advising with
MADV_NOHUGEPAGE does require it, so check for THP first in order
to avoid madvise failing with EINVAL.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-2-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a regression test for commit 671ddc700f ("KVM: nVMX: Don't leak
L1 MMIO regions to L2").
First, check to see that an L2 guest can be launched with a valid
APIC-access address that is backed by a page of L1 physical memory.
Next, set the APIC-access address to a (valid) L1 physical address
that is not backed by memory. KVM can't handle this situation, so
resuming L2 should result in a KVM exit for internal error
(emulation).
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201026180922.3120555-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM special-cases writes to MSR_IA32_TSC so that all CPUs have
the same base for the TSC. This logic is complicated, and we
do not want it to have any effect once the VM is started.
In particular, if any guest started to synchronize its TSCs
with writes to MSR_IA32_TSC rather than MSR_IA32_TSC_ADJUST,
the additional effect of kvm_write_tsc code would be uncharted
territory.
Therefore, this patch makes writes to MSR_IA32_TSC behave
essentially the same as writes to MSR_IA32_TSC_ADJUST when
they come from the guest. A new selftest (which passes
both before and after the patch) checks the current semantics
of writes to MSR_IA32_TSC and MSR_IA32_TSC_ADJUST originating
from both the host and the guest.
Upcoming work to remove the special side effects
of host-initiated writes to MSR_IA32_TSC and MSR_IA32_TSC_ADJUST
will be able to build onto this test, adjusting the host side
to use the new APIs and achieve the same effect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have the ability to handle MSRs from user space and also to
select which ones we do want to prevent in-kernel KVM code from handling,
let's add a selftest to show case and verify the API.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20200925143422.21718-9-graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
