korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-29 07:04:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
1,089,688 Commits 113 Branches 5,292 Tags 3.5 GiB
2d41dc2380
Commit Graph

8368 Commits

Author SHA1 Message Date
Jason A. Donenfeld
35a33ff380 random: use memmove instead of memcpy for remaining 32 bytes 
In order to immediately overwrite the old key on the stack, before
servicing a userspace request for bytes, we use the remaining 32 bytes
of block 0 as the key. This means moving indices 8,9,a,b,c,d,e,f ->
4,5,6,7,8,9,a,b. Since 4 < 8, for the kernel implementations of
memcpy(), this doesn't actually appear to be a problem in practice. But
relying on that characteristic seems a bit brittle. So let's change that
to a proper memmove(), which is the by-the-books way of handling
overlapping memory copies.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-04-16 12:53:31 +02:00
Jason A. Donenfeld
b0c3e796f2 random: make random_get_entropy() return an unsigned long 
Some implementations were returning type `unsigned long`, while others
that fell back to get_cycles() were implicitly returning a `cycles_t` or
an untyped constant int literal. That makes for weird and confusing
code, and basically all code in the kernel already handled it like it
was an `unsigned long`. I recently tried to handle it as the largest
type it could be, a `cycles_t`, but doing so doesn't really help with
much.

Instead let's just make random_get_entropy() return an unsigned long all
the time. This also matches the commonly used `arch_get_random_long()`
function, so now RDRAND and RDTSC return the same sized integer, which
means one can fallback to the other more gracefully.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-04-13 13:58:57 +02:00
Jason A. Donenfeld
5209aed513 random: allow partial reads if later user copies fail 
Rather than failing entirely if a copy_to_user() fails at some point,
instead we should return a partial read for the amount that succeeded
prior, unless none succeeded at all, in which case we return -EFAULT as
before.

This makes it consistent with other reader interfaces. For example, the
following snippet for /dev/zero outputs "4" followed by "1":

  int fd;
  void *x = mmap(NULL, 4096, PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
  assert(x != MAP_FAILED);
  fd = open("/dev/zero", O_RDONLY);
  assert(fd >= 0);
  printf("%zd\n", read(fd, x, 4));
  printf("%zd\n", read(fd, x + 4095, 4));
  close(fd);

This brings that same standard behavior to the various RNG reader
interfaces.

While we're at it, we can streamline the loop logic a little bit.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-04-13 13:58:57 +02:00
Jason A. Donenfeld
e3c1c4fd9e random: check for signals every PAGE_SIZE chunk of /dev/[u]random 
In 1448769c9c ("random: check for signal_pending() outside of
need_resched() check"), Jann pointed out that we previously were only
checking the TIF_NOTIFY_SIGNAL and TIF_SIGPENDING flags if the process
had TIF_NEED_RESCHED set, which meant in practice, super long reads to
/dev/[u]random would delay signal handling by a long time. I tried this
using the below program, and indeed I wasn't able to interrupt a
/dev/urandom read until after several megabytes had been read. The bug
he fixed has always been there, and so code that reads from /dev/urandom
without checking the return value of read() has mostly worked for a long
time, for most sizes, not just for <= 256.

Maybe it makes sense to keep that code working. The reason it was so
small prior, ignoring the fact that it didn't work anyway, was likely
because /dev/random used to block, and that could happen for pretty
large lengths of time while entropy was gathered. But now, it's just a
chacha20 call, which is extremely fast and is just operating on pure
data, without having to wait for some external event. In that sense,
/dev/[u]random is a lot more like /dev/zero.

Taking a page out of /dev/zero's read_zero() function, it always returns
at least one chunk, and then checks for signals after each chunk. Chunk
sizes there are of length PAGE_SIZE. Let's just copy the same thing for
/dev/[u]random, and check for signals and cond_resched() for every
PAGE_SIZE amount of data. This makes the behavior more consistent with
expectations, and should mitigate the impact of Jann's fix for the
age-old signal check bug.

---- test program ----

  #include <unistd.h>
  #include <signal.h>
  #include <stdio.h>
  #include <sys/random.h>

  static unsigned char x[~0U];

  static void handle(int) { }

  int main(int argc, char *argv[])
  {
    pid_t pid = getpid(), child;
    signal(SIGUSR1, handle);
    if (!(child = fork())) {
      for (;;)
        kill(pid, SIGUSR1);
    }
    pause();
    printf("interrupted after reading %zd bytes\n", getrandom(x, sizeof(x), 0));
    kill(child, SIGTERM);
    return 0;
  }

Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-04-07 01:36:37 +02:00
Jann Horn
1448769c9c random: check for signal_pending() outside of need_resched() check 
signal_pending() checks TIF_NOTIFY_SIGNAL and TIF_SIGPENDING, which
signal that the task should bail out of the syscall when possible. This
is a separate concept from need_resched(), which checks
TIF_NEED_RESCHED, signaling that the task should preempt.

In particular, with the current code, the signal_pending() bailout
probably won't work reliably.

Change this to look like other functions that read lots of data, such as
read_zero().

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-04-06 15:09:33 +02:00
Jason A. Donenfeld
aba120cc10 random: do not allow user to keep crng key around on stack 
The fast key erasure RNG design relies on the key that's used to be used
and then discarded. We do this, making judicious use of
memzero_explicit().  However, reads to /dev/urandom and calls to
getrandom() involve a copy_to_user(), and userspace can use FUSE or
userfaultfd, or make a massive call, dynamically remap memory addresses
as it goes, and set the process priority to idle, in order to keep a
kernel stack alive indefinitely. By probing
/proc/sys/kernel/random/entropy_avail to learn when the crng key is
refreshed, a malicious userspace could mount this attack every 5 minutes
thereafter, breaking the crng's forward secrecy.

In order to fix this, we just overwrite the stack's key with the first
32 bytes of the "free" fast key erasure output. If we're returning <= 32
bytes to the user, then we can still return those bytes directly, so
that short reads don't become slower. And for long reads, the difference
is hopefully lost in the amortization, so it doesn't change much, with
that amortization helping variously for medium reads.

We don't need to do this for get_random_bytes() and the various
kernel-space callers, and later, if we ever switch to always batching,
this won't be necessary either, so there's no need to change the API of
these functions.

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Fixes: c92e040d57 ("random: add backtracking protection to the CRNG")
Fixes: 186873c549 ("random: use simpler fast key erasure flow on per-cpu keys")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-04-06 15:05:10 +02:00
Jason A. Donenfeld
48bff1053c random: opportunistically initialize on /dev/urandom reads 
In 6f98a4bfee ("random: block in /dev/urandom"), we tried to make a
successful try_to_generate_entropy() call *required* if the RNG was not
already initialized. Unfortunately, weird architectures and old
userspaces combined in TCG test harnesses, making that change still not
realistic, so it was reverted in 0313bc278d ("Revert "random: block in
/dev/urandom"").

However, rather than making a successful try_to_generate_entropy() call
*required*, we can instead make it *best-effort*.

If try_to_generate_entropy() fails, it fails, and nothing changes from
the current behavior. If it succeeds, then /dev/urandom becomes safe to
use for free. This way, we don't risk the regression potential that led
to us reverting the required-try_to_generate_entropy() call before.

Practically speaking, this means that at least on x86, /dev/urandom
becomes safe. Probably other architectures with working cycle counters
will also become safe. And architectures with slow or broken cycle
counters at least won't be affected at all by this change.

So it may not be the glorious "all things are unified!" change we were
hoping for initially, but practically speaking, it makes a positive
impact.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-04-05 16:13:13 +02:00
Jan Varho
527a9867af random: do not split fast init input in add_hwgenerator_randomness() 
add_hwgenerator_randomness() tries to only use the required amount of input
for fast init, but credits all the entropy, rather than a fraction of
it. Since it's hard to determine how much entropy is left over out of a
non-unformly random sample, either give it all to fast init or credit
it, but don't attempt to do both. In the process, we can clean up the
injection code to no longer need to return a value.

Signed-off-by: Jan Varho <jan.varho@gmail.com>
[Jason: expanded commit message]
Fixes: 73c7733f12 ("random: do not throw away excess input to crng_fast_load")
Cc: stable@vger.kernel.org # 5.17+, requires af704c856e
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-04-04 19:34:49 +02:00
Linus Torvalds
478f74a3d8 Random number generator fixes for Linux 5.18-rc1. 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmJGFgQACgkQSfxwEqXe
 A64CbBAAmi1I+wOVtO8BAC/Two4yH9s9WC0nBc7c70ZIhVnNF+hi2KmJuVGnj8Id
 Lj3yIVKDqfZuoqqqOTlDKwPPsNLHPX2h/XrhrYju/nJBY6Eh8cSbOHRA26Xnziq5
 cGfOW85eQpKyxDTWH3R4SDs7ng+omPYtn54tDnUsN/obJYiSsX7yT7IFFJgCtRpA
 9tboSO9Wb6u9+wR1TnxvLYDEXwrUjmz2UKNlKlMlgeAVCvmnfvzD47ez/vo9B44+
 IOPa8QM5PCHIxBvWDyVlMHZs6lK6fDZF4TWAwe5etJda972eQWDb9mpQZ2ft9INX
 9gBN6g7CLCSb9047ItaPqkgzdhRqnxww8Pd1ccxf/6tW/5+kVedaA7Eypy1UcuA/
 WrQIqx6lh+Qx4YcWyO8ULUiky64zad7pahtaFXzjdEGjQuylqjPHCxxCmiltpSZ9
 PTbR5r+2wEdVlm4I2u3cIVSLy+lgS5sgF5YA2UKOB32fqlB3y2Cykq4FfOiJZK6Z
 9VdQqqhWs3zE5d6olfFiNewDLyKTfnJ1FBOOxMNLhOKEL0qDFcjd9UXmrkpZHdv2
 yz4Ps4k+d3gqGpcIue97zEBA7mU9UyP9rzX6pMEMTb+i8WpZa8rrdxak1AmJBwfI
 FINjZl4fe6ZmDPBTW9FZB2ibjRAt7wtzEsQjNI7sfT9hKnGZlYI=
 =NfL4
 -----END PGP SIGNATURE-----

Merge tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:

 - If a hardware random number generator passes a sufficiently large
   chunk of entropy to random.c during early boot, we now skip the
   "fast_init" business and let it initialize the RNG.

   This makes CONFIG_RANDOM_TRUST_BOOTLOADER=y actually useful.

 - We already have the command line `random.trust_cpu=0/1` option for
   RDRAND, which let distros enable CONFIG_RANDOM_TRUST_CPU=y while
   placating concerns of more paranoid users.

   Now we add `random.trust_bootloader=0/1` so that distros can
   similarly enable CONFIG_RANDOM_TRUST_BOOTLOADER=y.

 - Re-add a comment that got removed by accident in the recent revert.

 - Add the spec-compliant ACPI CID for vmgenid, which Microsoft added to
   the vmgenid spec at Ard's request during earlier review.

 - Restore build-time randomness via the latent entropy plugin, which
   was lost when we transitioned to using a hash function.

* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: mix build-time latent entropy into pool at init
  virt: vmgenid: recognize new CID added by Hyper-V
  random: re-add removed comment about get_random_{u32,u64} reseeding
  random: treat bootloader trust toggle the same way as cpu trust toggle
  random: skip fast_init if hwrng provides large chunk of entropy
 2022-03-31 14:51:34 -07:00
Jason A. Donenfeld
1754abb3e7 random: mix build-time latent entropy into pool at init 
Prior, the "input_pool_data" array needed no real initialization, and so
it was easy to mark it with __latent_entropy to populate it during
compile-time. In switching to using a hash function, this required us to
specifically initialize it to some specific state, which means we
dropped the __latent_entropy attribute. An unfortunate side effect was
this meant the pool was no longer seeded using compile-time random data.
In order to bring this back, we declare an array in rand_initialize()
with __latent_entropy and call mix_pool_bytes() on that at init, which
accomplishes the same thing as before. We make this __initconst, so that
it doesn't take up space at runtime after init.

Fixes: 6e8ec2552c ("random: use computational hash for entropy extraction")
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-31 16:43:27 -04:00
Linus Torvalds
9ae2a14308 dma-mapping updates for Linux 5.18 
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
  - fix return value of dma-debug __setup handlers (Randy Dunlap)
  - swiotlb cleanups (Robin Murphy)
  - remove most remaining users of the pci-dma-compat.h API
    (Christophe JAILLET)
  - share the ABI header for the DMA map_benchmark with userspace
    (Tian Tao)
  - update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
  - remove CONFIG_DMA_REMAP (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmJDDgsLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYM9oBAAxm93DZCXsqektM2qJ34o1KCyfAhvTvZ1r38ab+cl
 wJwmMPF6/S9MCj6XZEnCzUnXL//TnhcuYVztNpPTWqhx6QaqWmmx9yJKjoYAnHce
 svVMef7iipn35w7hAPpiVR/AVwWyxQCkSC+5sgp6XX8mp7l7I3ajfO0fZ52JCcxw
 12d4k1E0yjC096Kw8wXQv+rzmCAoQcK9Jj20COUO3rkgOr68ZIXse2HXUJjn76Fy
 wym2rJfqJ9mdKrDHqphe1ntIzkcQNWx9xR0UVh7/e4p7Si5H8Lp8QWwC7Zw6Y2Gb
 paeotIMu1uTKkcZI4K54J8PXRLA7PLrDSDFdxnKOsWNZU/inIwt9b11kr9FOaYqR
 BLJ+w6bF1/PmM6q2gkOwNuoiJD5YQfwF7y+wi84VyaauM0J8ssIHYnVrCWXn0m1E
 4veAkWasAYb1oaoNlDhmZEbpI+kcN3xwDyK1WbtHuGvR00oSvxl0d1viGTVXYfDA
 k5rBjb7CovK8JIrFIJoMiDM4TvdauxL66IlEL7ohLDh6l1f09Q0+gsdVcAM0ObX6
 zOkoulyHCFqkePvoH/xpyIrZZ9cHA228fZYC7QiBcxdWlD3dFMWkKvhajiSDQJSW
 SAz94CeEDWn64Q462N+ecivKlLwz7j/TqOig5xU+/6UoMC/2a7+HIim+p6bjh8Pc
 5Gg=
 =C+Es
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)

 - fix return value of dma-debug __setup handlers (Randy Dunlap)

 - swiotlb cleanups (Robin Murphy)

 - remove most remaining users of the pci-dma-compat.h API
   (Christophe JAILLET)

 - share the ABI header for the DMA map_benchmark with userspace
   (Tian Tao)

 - update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)

 - remove CONFIG_DMA_REMAP (me)

* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: benchmark: extract a common header file for map_benchmark definition
  dma-debug: fix return value of __setup handlers
  dma-mapping: remove CONFIG_DMA_REMAP
  media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
  rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
  sparc: Remove usage of the deprecated "pci-dma-compat.h" API
  agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
  alpha: Remove usage of the deprecated "pci-dma-compat.h" API
  MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
  swiotlb: simplify array allocation
  swiotlb: tidy up includes
  swiotlb: simplify debugfs setup
  swiotlb: do not zero buffer in set_memory_decrypted()
 2022-03-29 08:50:14 -07:00
Linus Torvalds
a701f370b5 xen: branch for v5.18-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYkF9UwAKCRCAXGG7T9hj
 vsXpAPwKXI4WIQcvnVCdULQfuXpA1TbD5XZuS9OuiN/OxWHbzAEA1VHWTmS+tpZ1
 ptOyoGhAWhTGeplToobDSGz5qTXEPAI=
 =FaKX
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

 - A bunch of minor cleanups

 - A fix for kexec in Xen dom0 when executed on a high cpu number

 - A fix for resuming after suspend of a Xen guest with assigned PCI
   devices

 - A fix for a crash due to not disabled preemption when resuming as Xen
   dom0

* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: fix is_xen_pmu()
  xen: don't hang when resuming PCI device
  arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
  xen/grant-table: remove readonly parameter from functions
  xen/grant-table: remove gnttab_*transfer*() functions
  drivers/xen: use helper macro __ATTR_RW
  x86/xen: Fix kerneldoc warning
  xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
  xen: use time_is_before_eq_jiffies() instead of open coding it
 2022-03-28 14:32:39 -07:00
Linus Torvalds
02e2af20f4 Char/Misc and other driver updates for 5.18-rc1 
Here is the big set of char/misc and other small driver subsystem
 updates for 5.18-rc1.
 
 Included in here are merges from driver subsystems which contain:
 	- iio driver updates and new drivers
 	- fsi driver updates
 	- fpga driver updates
 	- habanalabs driver updates and support for new hardware
 	- soundwire driver updates and new drivers
 	- phy driver updates and new drivers
 	- coresight driver updates
 	- icc driver updates
 
 Individual changes include:
 	- mei driver updates
 	- interconnect driver updates
 	- new PECI driver subsystem added
 	- vmci driver updates
 	- lots of tiny misc/char driver updates
 
 There will be two merge conflicts with your tree, one in MAINTAINERS
 which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
 which also should be easy to resolve.
 
 All of these have been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
 R4bgCjfg8BWIBcVVXg3/
 =WWXC
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  updates for 5.18-rc1.

  Included in here are merges from driver subsystems which contain:

   - iio driver updates and new drivers

   - fsi driver updates

   - fpga driver updates

   - habanalabs driver updates and support for new hardware

   - soundwire driver updates and new drivers

   - phy driver updates and new drivers

   - coresight driver updates

   - icc driver updates

  Individual changes include:

   - mei driver updates

   - interconnect driver updates

   - new PECI driver subsystem added

   - vmci driver updates

   - lots of tiny misc/char driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
  firmware: google: Properly state IOMEM dependency
  kgdbts: fix return value of __setup handler
  firmware: sysfb: fix platform-device leak in error path
  firmware: stratix10-svc: add missing callback parameter on RSU
  arm64: dts: qcom: add non-secure domain property to fastrpc nodes
  misc: fastrpc: Add dma handle implementation
  misc: fastrpc: Add fdlist implementation
  misc: fastrpc: Add helper function to get list and page
  misc: fastrpc: Add support to secure memory map
  dt-bindings: misc: add fastrpc domain vmid property
  misc: fastrpc: check before loading process to the DSP
  misc: fastrpc: add secure domain support
  dt-bindings: misc: add property to support non-secure DSP
  misc: fastrpc: Add support to get DSP capabilities
  misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
  misc: fastrpc: separate fastrpc device from channel context
  dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
  dt-bindings: nvmem: make "reg" property optional
  nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
  nvmem: dt-bindings: Fix the error of dt-bindings check
  ...
 2022-03-28 12:27:35 -07:00
Linus Torvalds
52d543b549 Minor fixes for IPMI 
Little fixes for various things people have noticed.
 
 One enhancement, the IPMI over IPMB (I2c) is modified to allow it to
 take a separate sender and receiver device.  The Raspberry Pi has an
 I2C slave device that cannot send.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmI8qi4ACgkQYfOMkJGb
 /4EVoBAAqHQ0DlNxMDF/oLLqV1j+Hw6BEo8s5IoYpN/U9A5lfz0YnWPXxSd00Cvx
 S49bVVnF+PhjWnB7t6UTqqOQIOJFSr9fAdrWGKUbO6tneO9Sq3EIWNHlzuTw4ZRw
 A/BL4MnCkDI4pxqvI3zOdghEBuY2nIsMHV3SrFsQ7XSYE0Llf1KRn+VFPidfDAO7
 4zHbu2+I7kGYU1zXw/IuTTyFEUbXbMhJjdxDCzOmXny5lta1jBvviL760uWSTT2c
 Hz14bCX4typA3dVdvfTMOQOOF1X6j+3fNT+Yq4mSIDBuib0pZxycx0/DkyiG3tVb
 8rTWnZFQWx6b5z6zKSTF522GwhFjHubKp04CHdNxwp0hhULSEVhn7JULzRbBz3Wm
 dVHGcX7uJFtazZy2ckGgRy0hLiKa11h/tE5ZIi3fgDOX0HkSxObJ7M75LfzkqAhP
 1KIQc2YPkQkj/XOVGX2o2fCRZ/4DG5uSkq/RFmDYmTyrHLnioyZthzWvhrBYR6r4
 hrCb89zwiow9HYxaOxLx3GygRitExdTlmv1ORsXioVls024ulYs0arefH04zqVt3
 J/QvaO1+hsh681IBelsxj+TCwYSZXZ1zWH4MnS6A8bTkiwHny3xrAtQG9Qq1qivd
 EhhB3Z6VIsQ0ry5Hdp+TLgU3fTHUFcas4DqVRZwDfydlz7/pPdQ=
 =FQQz
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.17-1' of https://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:

 - Little fixes for various things people have noticed.

 - One enhancement, the IPMI over IPMB (I2c) is modified to allow it to
   take a separate sender and receiver device. The Raspberry Pi has an
   I2C slave device that cannot send.

* tag 'for-linus-5.17-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: initialize len variable
  ipmi: kcs: aspeed: Remove old bindings support
  ipmi:ipmb: Add the ability to have a separate slave and master device
  ipmi:ipmi_ipmb: Unregister the SMI on remove
  ipmi: kcs: aspeed: Add AST2600 compatible string
  ipmi: ssif: replace strlcpy with strscpy
  ipmi/watchdog: Constify ident
  ipmi: Add the git repository to the MAINTAINERS file
 2022-03-25 17:46:22 -07:00
Jason A. Donenfeld
dd7aa36e53 random: re-add removed comment about get_random_{u32,u64} reseeding 
The comment about get_random_{u32,u64}() not invoking reseeding got
added in an unrelated commit, that then was recently reverted by
0313bc278d ("Revert "random: block in /dev/urandom""). So this adds
that little comment snippet back, and improves the wording a bit too.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-25 08:49:40 -06:00
Jason A. Donenfeld
d97c68d178 random: treat bootloader trust toggle the same way as cpu trust toggle 
If CONFIG_RANDOM_TRUST_CPU is set, the RNG initializes using RDRAND.
But, the user can disable (or enable) this behavior by setting
`random.trust_cpu=0/1` on the kernel command line. This allows system
builders to do reasonable things while avoiding howls from tinfoil
hatters. (Or vice versa.)

CONFIG_RANDOM_TRUST_BOOTLOADER is basically the same thing, but regards
the seed passed via EFI or device tree, which might come from RDRAND or
a TPM or somewhere else. In order to allow distros to more easily enable
this while avoiding those same howls (or vice versa), this commit adds
the corresponding `random.trust_bootloader=0/1` toggle.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Graham Christensen <graham@grahamc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://github.com/NixOS/nixpkgs/pull/165355
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-25 08:49:40 -06:00
Jason A. Donenfeld
af704c856e random: skip fast_init if hwrng provides large chunk of entropy 
At boot time, EFI calls add_bootloader_randomness(), which in turn calls
add_hwgenerator_randomness(). Currently add_hwgenerator_randomness()
feeds the first 64 bytes of randomness to the "fast init"
non-crypto-grade phase. But if add_hwgenerator_randomness() gets called
with more than POOL_MIN_BITS of entropy, there's no point in passing it
off to the "fast init" stage, since that's enough entropy to bootstrap
the real RNG. The "fast init" stage is just there to provide _something_
in the case where we don't have enough entropy to properly bootstrap the
RNG. But if we do have enough entropy to bootstrap the RNG, the current
logic doesn't serve a purpose. So, in the case where we're passed
greater than or equal to POOL_MIN_BITS of entropy, this commit makes us
skip the "fast init" phase.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-25 08:49:40 -06:00
Linus Torvalds
b14ffae378 drm for 5.18-rc1 
dma-buf:
 - rename dma-buf-map to iosys-map
 
 core:
 - move buddy allocator to core
 - add pci/platform init macros
 - improve EDID parser deep color handling
 - EDID timing type 7 support
 - add GPD Win Max quirk
 - add yes/no helpers to string_helpers
 - flatten syncobj chains
 - add nomodeset support to lots of drivers
 - improve fb-helper clipping support
 - add default property value interface
 
 fbdev:
 - improve fbdev ops speed
 
 ttm:
 - add a backpointer from ttm bo->ttm resource
 
 dp:
 - move displayport headers
 - add a dp helper module
 
 bridge:
 - anx7625 atomic support, HDCP support
 
 panel:
 - split out panel-lvds and lvds bindings
 - find panels in OF subnodes
 
 privacy:
 - add chromeos privacy screen support
 
 fb:
 - hot unplug fw fb on forced removal
 
 simpledrm:
 - request region instead of marking ioresource busy
 - add panel oreintation property
 
 udmabuf:
 - fix oops with 0 pages
 
 amdgpu:
 - power management code cleanup
 - Enable freesync video mode by default
 - RAS code cleanup
 - Improve VRAM access for debug using SDMA
 - SR-IOV rework special register access and fixes
 - profiling power state request ioctl
 - expose IP discovery via sysfs
 - Cyan skillfish updates
 - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
 - expose benchmark tests via debugfs
 - add module param to disable XGMI for testing
 - GPU reset debugfs register dumping support
 
 amdkfd:
 - CRIU support
 - SDMA queue fixes
 
 radeon:
 - UVD suspend fix
 - iMac backlight fix
 
 i915:
 - minimal parallel submission for execlists
 - DG2-G12 subplatform added
 - DG2 programming workarounds
 - DG2 accelerated migration support
 - flat CCS and CCS engine support for XeHP
 - initial small BAR support
 - drop fake LMEM support
 - ADL-N PCH support
 - bigjoiner updates
 - introduce VMA resources and async unbinding
 - register definitions cleanups
 - multi-FBC refactoring
 - DG1 OPROM over SPI support
 - ADL-N platform enabling
 - opregion mailbox #5 support
 - DP MST ESI improvements
 - drm device based logging
 - async flip optimisation for DG2
 - CPU arch abstraction fixes
 - improve GuC ADS init to work on aarch64
 - tweak TTM LRU priority hint
 - GuC 69.0.3 support
 - remove short term execbuf pins
 
 nouveau:
 - higher DP/eDP bitrates
 - backlight fixes
 
 msm:
 - dpu + dp support for sc8180x
 - dp support for sm8350
 - dpu + dsi support for qcm2290
 - 10nm dsi phy tuning support
 - bridge support for dp encoder
 - gpu support for additional 7c3 SKUs
 
 ingenic:
 - HDMI support for JZ4780
 - aux channel EDID support
 
 ast:
 - AST2600 support
 - add wide screen support
 - create DP/DVI connectors
 
 omapdrm:
 - fix implicit dma_buf fencing
 
 vc4:
 - add CSC + full range support
 - better display firmware handoff
 
 panfrost:
 - add initial dual-core GPU support
 
 stm:
 - new revision support
 - fb handover support
 
 mediatek:
 - transfer display binding document to yaml format.
 - add mt8195 display device binding.
 - allow commands to be sent during video mode.
 - add wait_for_event for crtc disable by cmdq.
 
 tegra:
 - YUV format support
 
 rcar-du:
 - LVDS support for M3-W+ (R8A77961)
 
 exynos:
 - BGR pixel format for FIMD device
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmI71h4ACgkQDHTzWXnE
 hr6wKg//SvKFiEOhptua8Ao8XYkhXpg1/tgdAs4D7bZ0YgJyF4Im0RuFOKMmF3mN
 0Y8AwguqrsmrOAFbK8B1WEysB66DmGlZN/V2Q75X7fui8xs4uGF2Fcxyr+265zhf
 vONPwAoxYr+KXqwOI1p1BP2QEL6bJTdu+nrXRsXIBIrWnw8ehXJlw3fDhgvG5QBn
 RPdbU7lQnd47hdYxkbe5SiZvWnPC46dJmpqsRJir0xjskR6juU36f34C4IKhTGwO
 NDPeWVgusVXtIC/F4X6RebCWG0f66h+CUFa9zeYIleI/2/5yZWXfcw6Obx8HgPkt
 gieiI0R4TpkVxeHCApCQ5UpxWgfSOXdoDoyw172bKQw7JCHVEkSwenyMEEwNet6r
 SCJrRmlB1PBI/iTWmhm9qgrU46ZZyAnQoTlCsXGzJncdP3hzGlA1embl00yfEl7f
 wzM35N20qd5T4VKUEF8QYF0fLZYmKw4cWVASu4hQ3qmGal6frilphz2J8JK8hQNq
 KhFqNbVTnZsQNr9LBCbrf0kOPaMzpmW+2vQG9ApdAb1N3gNPZT7ctti0Xq5N2OUR
 AipWFAsDPS2NPADKmBtDU55PgFH9MqUIsoHHXLV4Qi76dvCqYoN68qRQxrL7rpSu
 b0gr0YKU2QcIB/uytjOPHcgtI5Xvrh+q8JPz/dJ38/Esgjmk4wo=
 =uRsT
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Lots of work all over, Intel improving DG2 support, amdkfd CRIU
  support, msm new hw support, and faster fbdev support.

  dma-buf:
   - rename dma-buf-map to iosys-map

  core:
   - move buddy allocator to core
   - add pci/platform init macros
   - improve EDID parser deep color handling
   - EDID timing type 7 support
   - add GPD Win Max quirk
   - add yes/no helpers to string_helpers
   - flatten syncobj chains
   - add nomodeset support to lots of drivers
   - improve fb-helper clipping support
   - add default property value interface

  fbdev:
   - improve fbdev ops speed

  ttm:
   - add a backpointer from ttm bo->ttm resource

  dp:
   - move displayport headers
   - add a dp helper module

  bridge:
   - anx7625 atomic support, HDCP support

  panel:
   - split out panel-lvds and lvds bindings
   - find panels in OF subnodes

  privacy:
   - add chromeos privacy screen support

  fb:
   - hot unplug fw fb on forced removal

  simpledrm:
   - request region instead of marking ioresource busy
   - add panel oreintation property

  udmabuf:
   - fix oops with 0 pages

  amdgpu:
   - power management code cleanup
   - Enable freesync video mode by default
   - RAS code cleanup
   - Improve VRAM access for debug using SDMA
   - SR-IOV rework special register access and fixes
   - profiling power state request ioctl
   - expose IP discovery via sysfs
   - Cyan skillfish updates
   - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
   - expose benchmark tests via debugfs
   - add module param to disable XGMI for testing
   - GPU reset debugfs register dumping support

  amdkfd:
   - CRIU support
   - SDMA queue fixes

  radeon:
   - UVD suspend fix
   - iMac backlight fix

  i915:
   - minimal parallel submission for execlists
   - DG2-G12 subplatform added
   - DG2 programming workarounds
   - DG2 accelerated migration support
   - flat CCS and CCS engine support for XeHP
   - initial small BAR support
   - drop fake LMEM support
   - ADL-N PCH support
   - bigjoiner updates
   - introduce VMA resources and async unbinding
   - register definitions cleanups
   - multi-FBC refactoring
   - DG1 OPROM over SPI support
   - ADL-N platform enabling
   - opregion mailbox #5 support
   - DP MST ESI improvements
   - drm device based logging
   - async flip optimisation for DG2
   - CPU arch abstraction fixes
   - improve GuC ADS init to work on aarch64
   - tweak TTM LRU priority hint
   - GuC 69.0.3 support
   - remove short term execbuf pins

  nouveau:
   - higher DP/eDP bitrates
   - backlight fixes

  msm:
   - dpu + dp support for sc8180x
   - dp support for sm8350
   - dpu + dsi support for qcm2290
   - 10nm dsi phy tuning support
   - bridge support for dp encoder
   - gpu support for additional 7c3 SKUs

  ingenic:
   - HDMI support for JZ4780
   - aux channel EDID support

  ast:
   - AST2600 support
   - add wide screen support
   - create DP/DVI connectors

  omapdrm:
   - fix implicit dma_buf fencing

  vc4:
   - add CSC + full range support
   - better display firmware handoff

  panfrost:
   - add initial dual-core GPU support

  stm:
   - new revision support
   - fb handover support

  mediatek:
   - transfer display binding document to yaml format.
   - add mt8195 display device binding.
   - allow commands to be sent during video mode.
   - add wait_for_event for crtc disable by cmdq.

  tegra:
   - YUV format support

  rcar-du:
   - LVDS support for M3-W+ (R8A77961)

  exynos:
   - BGR pixel format for FIMD device"

* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
  drm/i915/display: Do not re-enable PSR after it was marked as not reliable
  drm/i915/display: Fix HPD short pulse handling for eDP
  drm/amdgpu: Use drm_mode_copy()
  drm/radeon: Use drm_mode_copy()
  drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
  drm/amdgpu: Remove pointless on stack mode copies
  drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
  drm/amdgpu/dc: fix typos in comments
  drm/amdgpu: fix typos in comments
  drm/amd/pm: fix typos in comments
  drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
  drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
  drm/amdkfd: evict svm bo worker handle error
  drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
  drm/amdgpu: only allow secure submission on rings which support that
  drm/amdgpu: fixed the warnings reported by kernel test robot
  drm/amd/display: 3.2.177
  drm/amd/display: [FW Promotion] Release 0.0.108.0
  drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
  drm/amd/display: Wait for hubp read line for Pollock
  ...
 2022-03-24 16:19:43 -07:00
Linus Torvalds
b4bc93bd76 ARM driver updates for 5.18 
There are a few separately maintained driver subsystems that we merge through
 the SoC tree, notable changes are:
 
  - Memory controller updates, mainly for Tegra and Mediatek SoCs,
    and clarifications for the memory controller DT bindings
 
  - SCMI firmware interface updates, in particular a new transport based
    on OPTEE and support for atomic operations.
 
  - Cleanups to the TEE subsystem, refactoring its memory management
 
 For SoC specific drivers without a separate subsystem, changes include
 
  - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
    Layerscape SoCs.
 
  - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
    and Qualcomm SM8450.
 
  - Better power management on Mediatek MT81xx, NXP i.MX8MQ
    and older NVIDIA Tegra chips
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmI4nOUACgkQmmx57+YA
 GNlNNhAApPQw+FKQ6yVj2EZYcaAgik8PJAJoNQWYED52iQfm5uXgjt3aQewvrPNW
 nkKx5Mx+fPUfaKx5mkVOFMhME5Bw9tYbXHm2/RpRp+n8jOdUlQpAhzIPOyWPHOJS
 QX6qu4t+agrQzjbOCGouAJXgyxhTJFUMviM2EgVHbQHXPtdF8i2kyanfCP7Rw8cx
 sVtLwpvhbLm849+deYRXuv2Xw9I3M1Np7018s5QciimI2eLLEb+lJ/C5XWz5pMYn
 M1nZ7uwCLKPCewpMETTuhKOv0ioOXyY9C1ghyiGZFhHQfoCYTu94Hrx9t8x5gQmL
 qWDinXWXVk8LBegyrs8Bp4wcjtmvMMLnfWtsGSfT5uq24JOGg22OmtUNhNJbS9+p
 VjEvBgkXYD7UEl5npI9v9/KQWr3/UDir0zvkuV40gJyeBWNEZ/PB8olXAxgL7wZv
 cXRYSaUYYt3DKQf1k5I4GUyQtkP/4RaBy6AqvH5Sx0lCwuY6G6ISK+kCPaaSRKnX
 WR+nFw84dKCu7miehmW9qSzMQ4kiSCKIDqk7ilHcwv0J2oXDrlqVPKGGGTzZjUc8
 +feqM/eSoYvDDEDemuXNSnl3hc1Zlvm7Apd5AN6kdTaNgoACDYdyvGuJ3CvzcA+K
 1gBHUBvGS/ODA25KnYabr7wCMgxYqf7dXfkyKIBwFHwxOnRHtgs=
 =Cfbk
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Arnd Bergmann:
 "There are a few separately maintained driver subsystems that we merge
  through the SoC tree, notable changes are:

   - Memory controller updates, mainly for Tegra and Mediatek SoCs, and
     clarifications for the memory controller DT bindings

   - SCMI firmware interface updates, in particular a new transport
     based on OPTEE and support for atomic operations.

   - Cleanups to the TEE subsystem, refactoring its memory management

  For SoC specific drivers without a separate subsystem, changes include

   - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
     Layerscape SoCs.

   - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
     and Qualcomm SM8450.

   - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
     NVIDIA Tegra chips"

* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
  ARM: spear: fix typos in comments
  soc/microchip: fix invalid free in mpfs_sys_controller_delete
  soc: s4: Add support for power domains controller
  dt-bindings: power: add Amlogic s4 power domains bindings
  ARM: at91: add support in soc driver for new SAMA5D29
  soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
  dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
  memory: emif: check the pointer temp in get_device_details()
  memory: emif: Add check for setup_interrupts
  dt-bindings: arm: mediatek: mmsys: add support for MT8186
  dt-bindings: mediatek: add compatible for MT8186 pwrap
  soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
  soc: mediatek: mmsys: add mmsys reset control for MT8186
  soc: mediatek: mtk-infracfg: Disable ACP on MT8192
  soc: ti: k3-socinfo: Add AM62x JTAG ID
  soc: mediatek: add MTK mutex support for MT8186
  soc: mediatek: mmsys: add mt8186 mmsys routing table
  soc: mediatek: pm-domains: Add support for mt8186
  dt-bindings: power: Add MT8186 power domains
  soc: mediatek: pm-domains: Add support for mt8195
  ...
 2022-03-23 18:23:13 -07:00
Linus Torvalds
0313bc278d Revert "random: block in /dev/urandom" 
This reverts commit 6f98a4bfee.

It turns out we still can't do this.  Way too many platforms that don't
have any real source of randomness at boot and no jitter entropy because
they don't even have a cycle counter.

As reported by Guenter Roeck:

 "This causes a large number of qemu boot test failures for various
  architectures (arm, m68k, microblaze, sparc32, xtensa are the ones I
  observed).

  Common denominator is that boot hangs at 'Saving random seed:'"

This isn't hugely unexpected - we tried it, it failed, so now we'll
revert it.

Link: https://lore.kernel.org/all/20220322155820.GA1745955@roeck-us.net/
Reported-and-bisected-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2022-03-22 09:17:20 -07:00
Linus Torvalds
8565d64430 bounds-fixes updates for v5.18-rc1 
- Various buffer and array bounds related fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmI4nPQWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJi/gD/9UctJGcKAi28EVVcS11oLSxl97
 LuIOJ4lWr8WUpCUqHcN65biUoODjshkIJRTx6Vxx9diLm3u6NO58+oJJCveKvE7w
 LtFjkbXBZ2sTxUoMZiva7qW8A6pYTfpiGq2lyUWVZRLOAMnNlCVuhcIonkzkR7js
 xdMZ2AmiQ0LJqT8paw4UUtSxGXGpLkcbuEoWHVWbqd3jgUbDwA4WR4xJw3ZUyh9i
 ONHOsfl/nFCNcLU69ppGJWPlXqNr5hHjjCeRzlcMfnwD/kxA7Qgt5TmpdEeAD4zx
 csNbvXbaW2Y+5IUWKXHT2Rt0rW1u+Zi5c+mtstTJf7XqK6slvTdLugY5TCtI6oXf
 x4qOMbqDjPbTr9Gpw3289WlqZYNJs1pGdeD4zL2HiOmwXq75GCNgxe0bv1hjnhNG
 b/bggAkpN/0n9r5BCQ32FWBg6S26VPOzg7//l6M38EBtQyakBVnS/064SP3aGTx4
 8oCKmrNLQXyQz7mdskOA9hwyEkF1+hCX2kJFsoZ9iN0TDYKzzJYP8cBLzZe6bfPE
 dqsAc36W8FIHATfo7wrbTVABP61wJcHgocSLICRYmGQrSMTqREl9P+nDDEWl/wcc
 vKd1kyYhnskcz7GVdFtSDnpcHp6W/aiLwJUFCpAkgz2GBzrt1MtGxnFrXl6s8cc4
 bSK/JClIBhMvBas4Tw==
 =gm8R
 -----END PGP SIGNATURE-----

Merge tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull bounds fixes from Kees Cook:
 "These are a handful of buffer and array bounds fixes that I've been
  carrying in preparation for the coming memcpy improvements and the
  enabling of '-Warray-bounds' globally.

  There are additional similar fixes in other maintainer's trees, but
  these ended up getting carried by me. :)"

* tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  media: omap3isp: Use struct_group() for memcpy() region
  tpm: vtpm_proxy: Check length to avoid compiler warning
  alpha: Silence -Warray-bounds warnings
  m68k: cmpxchg: Dereference matching size
  intel_th: msu: Use memset_startat() for clearing hw header
  KVM: x86: Replace memset() "optimization" with normal per-field writes
 2022-03-21 19:58:27 -07:00
Linus Torvalds
ad9c6ee642 spi: Updates for v5.18 
The overwhelming bulk of this pull request is a change from Uwe
 Kleine-König which changes the return type of the remove() function to
 void as part of some wider work he's doing to do this for all bus types,
 causing updates to most SPI device drivers.  The branch with that on has
 been cross merged with a couple of other trees which added new SPI
 drivers this cycle, I'm not expecting any build issues resulting from
 the change.
 
 Otherwise it's been a relatively quiet release with some new device
 support, a few minor features and the welcome completion of the
 conversion of the subsystem to use GPIO descriptors rather than numbers:
 
  - Change return type of remove() to void.
  - Completion of the conversion of SPI controller drivers to use GPIO
    descriptors rather than numbers.
  - Quite a few DT schema conversions.
  - Support for multiple SPI devices on a bus in ACPI systems.
  - Big overhaul of the PXA2xx SPI driver.
  - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
    MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
    Sunplus SP7021.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
 h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
 fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
 TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
 dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
 Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
 s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
 =4tlR
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The overwhelming bulk of this pull request is a change from Uwe
  Kleine-König which changes the return type of the remove() function to
  void as part of some wider work he's doing to do this for all bus
  types, causing updates to most SPI device drivers. The branch with
  that on has been cross merged with a couple of other trees which added
  new SPI drivers this cycle, I'm not expecting any build issues
  resulting from the change.

  Otherwise it's been a relatively quiet release with some new device
  support, a few minor features and the welcome completion of the
  conversion of the subsystem to use GPIO descriptors rather than
  numbers:

   - Change return type of remove() to void.

   - Completion of the conversion of SPI controller drivers to use GPIO
     descriptors rather than numbers.

   - Quite a few DT schema conversions.

   - Support for multiple SPI devices on a bus in ACPI systems.

   - Big overhaul of the PXA2xx SPI driver.

   - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
     MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
     Sunplus SP7021"

[ And this is obviously where that spi change that snuck into the
  regulator tree _should_ have been :^]

* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
  spi: fsi: Implement a timeout for polling status
  spi: Fix erroneous sgs value with min_t()
  spi: tegra20: Use of_device_get_match_data()
  spi: mediatek: add ipm design support for MT7986
  spi: Add compatible for MT7986
  spi: sun4i: fix typos in comments
  spi: mediatek: support tick_delay without enhance_timing
  spi: Update clock-names property for arm pl022
  spi: rockchip-sfc: fix platform_get_irq.cocci warning
  spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
  spi: dt-bindings: samsung: Add fsd spi compatible
  spi: topcliff-pch: Prevent usage of potentially stale DMA device
  spi: tegra210-quad: combined sequence mode
  spi: tegra210-quad: add acpi support
  spi: npcm-fiu: Fix typo ("npxm")
  spi: Fix Tegra QSPI example
  spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
  spi: cadence: fix platform_get_irq.cocci warning
  spi: Update NXP Flexspi maintainer details
  dt-bindings: mfd: maxim,max77802: Convert to dtschema
  ...
 2022-03-21 18:33:57 -07:00
Linus Torvalds
616355cc81 for-5.18/block-2022-03-18 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI0+GcQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgprUpD/9aTJEnj7VCw7UouSsg098sdjtoy9ilslU3
 ew47K8CIXHbCB4CDqLnFyvCwAdG1XGgS+fUmFAxvTr29R9SZeS5d+bXL6sZzEo0C
 bwxsJy9MM2QRtMvB+giAt1myXbwB8cG+ketMBWXqwXXRHRzPbbQfMZia7FqWMnfY
 KQanH9IwYHp1oa5U/W6Qcjm4oCnLgBMRwqByzUCtiF3y9qgaLkK+3IgkNwjJQjLA
 DTeUJ/9CgxGQQbzA+LPktbw2xfTqiUfcKq0mWx6Zt4wwNXn1ClqUDUXX6QSM8/5u
 3OimbscSkEPPTIYZbVBPkhFnAlQb4JaJEgOrbXvYKVV2Dh+eZY81XwNeE/E8gdBY
 TnHOTOCjkN/4sR3hIrWazlJzPLdpPA0eOYrhguCraQsX9mcsYNxlJ9otRv/Ve99g
 uqL0RZg3+NoK84fm79FCGy/ZmPQJvJttlBT9CKVwylv/Lky42xWe7AdM3OipKluY
 2nh+zN5Ai7WxZdTKXQFRhCSWfWQ+1qW51tB3dcGW+BooZr/oox47qKQVcHsEWbq1
 RNR45F5a4AuPwYUHF/P36WviLnEuq9AvX7OTTyYOplyVQohKIoDXp9chVzLNzBiZ
 KBR00W6MLKKKN+8foalQWgNyb2i2PH7Ib4xRXvXj/22Vwxg5UmUoBmSDSas9SZUS
 +dMo7CtNgA==
 =DpgP
 -----END PGP SIGNATURE-----

Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo)

 - blk-rq-qos completion fix (Tejun)

 - blk-cgroup merge fix (Tejun)

 - Add offline error return value to distinguish it from an IO error on
   the device (Song)

 - IO stats fixes (Zhang, Christoph)

 - blkcg refcount fixes (Ming, Yu)

 - Fix for indefinite dispatch loop softlockup (Shin'ichiro)

 - blk-mq hardware queue management improvements (Ming)

 - sbitmap dead code removal (Ming, John)

 - Plugging merge improvements (me)

 - Show blk-crypto capabilities in sysfs (Eric)

 - Multiple delayed queue run improvement (David)

 - Block throttling fixes (Ming)

 - Start deprecating auto module loading based on dev_t (Christoph)

 - bio allocation improvements (Christoph, Chaitanya)

 - Get rid of bio_devname (Christoph)

 - bio clone improvements (Christoph)

 - Block plugging improvements (Christoph)

 - Get rid of genhd.h header (Christoph)

 - Ensure drivers use appropriate flush helpers (Christoph)

 - Refcounting improvements (Christoph)

 - Queue initialization and teardown improvements (Ming, Christoph)

 - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng,
   Lukas, Nian, Yang, Eric, Chengming)

* tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits)
  block: cancel all throttled bios in del_gendisk()
  block: let blkcg_gq grab request queue's refcnt
  block: avoid use-after-free on throttle data
  block: limit request dispatch loop duration
  block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative"
  sr: simplify the local variable initialization in sr_block_open()
  block: don't merge across cgroup boundaries if blkcg is enabled
  block: fix rq-qos breakage from skipping rq_qos_done_bio()
  block: flush plug based on hardware and software queue order
  block: ensure plug merging checks the correct queue at least once
  block: move rq_qos_exit() into disk_release()
  block: do more work in elevator_exit
  block: move blk_exit_queue into disk_release
  block: move q_usage_counter release into blk_queue_release
  block: don't remove hctx debugfs dir from blk_mq_exit_queue
  block: move blkcg initialization/destroy into disk allocation/release handler
  sr: implement ->free_disk to simplify refcounting
  sd: implement ->free_disk to simplify refcounting
  sd: delay calling free_opal_dev
  sd: call sd_zbc_release_disk before releasing the scsi_device reference
  ...
 2022-03-21 16:48:55 -07:00
Linus Torvalds
93e220a62d Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 
Pull crypto updates from Herbert Xu:
 "API:
   - hwrng core now credits for low-quality RNG devices.

  Algorithms:
   - Optimisations for neon aes on arm/arm64.
   - Add accelerated crc32_be on arm64.
   - Add ffdheXYZ(dh) templates.
   - Disallow hmac keys < 112 bits in FIPS mode.
   - Add AVX assembly implementation for sm3 on x86.

  Drivers:
   - Add missing local_bh_disable calls for crypto_engine callback.
   - Ensure BH is disabled in crypto_engine callback path.
   - Fix zero length DMA mappings in ccree.
   - Add synchronization between mailbox accesses in octeontx2.
   - Add Xilinx SHA3 driver.
   - Add support for the TDES IP available on sama7g5 SoC in atmel"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits)
  crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST
  MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list
  crypto: dh - Remove the unused function dh_safe_prime_dh_alg()
  hwrng: nomadik - Change clk_disable to clk_disable_unprepare
  crypto: arm64 - cleanup comments
  crypto: qat - fix initialization of pfvf rts_map_msg structures
  crypto: qat - fix initialization of pfvf cap_msg structures
  crypto: qat - remove unneeded assignment
  crypto: qat - disable registration of algorithms
  crypto: hisilicon/qm - fix memset during queues clearing
  crypto: xilinx: prevent probing on non-xilinx hardware
  crypto: marvell/octeontx - Use swap() instead of open coding it
  crypto: ccree - Fix use after free in cc_cipher_exit()
  crypto: ccp - ccp_dmaengine_unregister release dma channels
  crypto: octeontx2 - fix missing unlock
  hwrng: cavium - fix NULL but dereferenced coccicheck error
  crypto: cavium/nitrox - don't cast parameter in bit operations
  crypto: vmx - add missing dependencies
  MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver
  crypto: xilinx - Add Xilinx SHA3 driver
  ...
 2022-03-21 16:02:36 -07:00
Linus Torvalds
5628b8de12 Random number generator changes for Linux 5.18-rc1. 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmIzwtEACgkQSfxwEqXe
 A67NCBAA1+U01HXx4ethmmy1m2pXHAIwngI7PP0QzyZtmoloWockdN1lRfQ1C0uJ
 Whk/9Hc9G7iujznsxOnCS+LeNwRzd7CjtFbTgK+yGIRKwL9GFcVwA5nrifP9TjqZ
 FWmTIomjjmA06YRYsNOdNSQdN6DdpQz8xLw0EqVOZerI4ITFErYlW8lLqOOKY99N
 f9glQK75kh41SUgo+K3JSn46fhB95HldL6dYSZzjQ6QsVKBQuQTDE9ryfrH2XZDw
 xI2nf/ycXPUBv7Bb+0op+7ES++CoDigM2nIyxapEj3ZkpplxL4M+cCIHq3Juzfwm
 jDdbZbs5SqDszOQM/dvCJSR+S/D3QIKdv3fwwWHDTigByZdgpudT3rr9k7dY60Z8
 aNvOzNWOzGH9/0boLl55WysF6cBQnazbgtzeWpzeuWFhAyfxN/DJx2sf8U+TmN6n
 3bDUafamAvmkkIOoHUzOXfjo2lhXxlmRZ40rWVNX5JvcJj5+5jRmTawrQj+9fn8/
 MhiIZ6KBDV1OxPwJzG6jm++JP6rgXfXsxduomO7cIEWs10itf/cE8WD9qJrtZTtg
 kfjYUguFOd/QyzY0A1w6FD865vy8YhATk71Ywgwj9AI+cfH8QUajpDkXOutjop8x
 8HBxIGx6Itgzilfuo5jpJxlVhNO3G6v1fX/A+mUMAfHufkmnfiQ=
 =cyDR
 -----END PGP SIGNATURE-----

Merge tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

Pull random number generator updates from Jason Donenfeld:
 "There have been a few important changes to the RNG's crypto, but the
  intent for 5.18 has been to shore up the existing design as much as
  possible with modern cryptographic functions and proven constructions,
  rather than actually changing up anything fundamental to the RNG's
  design.

  So it's still the same old RNG at its core as before: it still counts
  entropy bits, and collects from the various sources with the same
  heuristics as before, and so forth. However, the cryptographic
  algorithms that transform that entropic data into safe random numbers
  have been modernized.

  Just as important, if not more, is that the code has been cleaned up
  and re-documented. As one of the first drivers in Linux, going back to
  1.3.30, its general style and organization was showing its age and
  becoming both a maintenance burden and an auditability impediment.

  Hopefully this provides a more solid foundation to build on for the
  future. I encourage you to open up the file in full, and maybe you'll
  remark, "oh, that's what it's doing," and enjoy reading it. That, at
  least, is the eventual goal, which this pull begins working toward.

  Here's a summary of the various patches in this pull:

   - /dev/urandom and /dev/random now do the same thing, per the patch
     we discussed on the list. I think this is worth trying out. If it
     does appear problematic, I've made sure to keep it standalone and
     revertible without any conflicts.

   - Fixes and cleanups for numerous integer type problems, locking
     issues, and general code quality concerns.

   - The input pool's LFSR has been replaced with a cryptographically
     secure hash function, which has security and performance benefits
     alike, and consequently allows us to count entropy bits linearly.

   - The pre-init injection now uses a real hash function too, instead
     of an LFSR or vanilla xor.

   - The interrupt handler's fast_mix() function now uses one round of
     SipHash, rather than the fake crypto that was there before.

   - All additions of RDRAND and RDSEED now go through the input pool's
     hash function, in part to mitigate ridiculous hypothetical CPU
     backdoors, but more so to have a consistent interface for ingesting
     entropy that's easy to analyze, making everything happen one way,
     instead of a potpourri of different ways.

   - The crng now works on per-cpu data, while also being in accordance
     with the actual "fast key erasure RNG" design. This allows us to
     fix several boot-time race complications associated with the prior
     dynamically allocated model, eliminates much locking, and makes our
     backtrack protection more robust.

   - Batched entropy now erases doled out values so that it's backtrack
     resistant.

   - Working closely with Sebastian, the interrupt handler no longer
     needs to take any locks at all, as we punt the
     synchronized/expensive operations to a workqueue. This is
     especially nice for PREEMPT_RT, where taking spinlocks in irq
     context is problematic. It also makes the handler faster for the
     rest of us.

   - Also working with Sebastian, we now do the right thing on CPU
     hotplug, so that we don't use stale entropy or fail to accumulate
     new entropy when CPUs come back online.

   - We handle virtual machines that fork / clone / snapshot, using the
     "vmgenid" ACPI specification for retrieving a unique new RNG seed,
     which we can use to also make WireGuard (and in the future, other
     things) safe across VM forks.

   - Around boot time, we now try to reseed more often if enough entropy
     is available, before settling on the usual 5 minute schedule.

   - Last, but certainly not least, the documentation in the file has
     been updated considerably"

* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (60 commits)
  random: check for signal and try earlier when generating entropy
  random: reseed more often immediately after booting
  random: make consistent usage of crng_ready()
  random: use SipHash as interrupt entropy accumulator
  wireguard: device: clear keys on VM fork
  random: provide notifier for VM fork
  random: replace custom notifier chain with standard one
  random: do not export add_vmfork_randomness() unless needed
  virt: vmgenid: notify RNG of VM fork and supply generation ID
  ACPI: allow longer device IDs
  random: add mechanism for VM forks to reinitialize crng
  random: don't let 644 read-only sysctls be written to
  random: give sysctl_random_min_urandom_seed a more sensible value
  random: block in /dev/urandom
  random: do crng pre-init loading in worker rather than irq
  random: unify cycles_t and jiffies usage and types
  random: cleanup UUID handling
  random: only wake up writers after zap if threshold was passed
  random: round-robin registers as ulong, not u32
  random: clear fast pool, crng, and batches in cpuhp bring up
  ...
 2022-03-21 14:55:32 -07:00
Tom Rix
8d10ea152e ipmi: initialize len variable 
Clang static analysis reports this issue
ipmi_ssif.c:1731:3: warning: 4th function call
  argument is an uninitialized value
  dev_info(&ssif_info->client->dev,
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The 4th parameter is the 'len' variable.
len is only set by a successful call to do_cmd().
Initialize to len 0.

Signed-off-by: Tom Rix <trix@redhat.com>
Message-Id: <20220320135954.2258545-1-trix@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
 2022-03-20 12:37:15 -05:00
Randy Dunlap
fefb8a2a94 virtio_console: eliminate anonymous module_init & module_exit 
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Amit Shah <amit@kernel.org>
Cc: virtualization@lists.linux-foundation.org
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220316192010.19001-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2022-03-18 13:45:55 +01:00
Juergen Gross
c94b731da2 xen/grant-table: remove readonly parameter from functions 
The gnttab_end_foreign_access() family of functions is taking a
"readonly" parameter, which isn't used. Remove it from the function
parameters.

Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103429.12845-3-jgross@suse.com
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
 2022-03-15 20:34:40 -05:00
Miaoqian Lin
7f0f1f3ef6 hwrng: nomadik - Change clk_disable to clk_disable_unprepare 
The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable_unprepare.

Fix this by changing clk_disable to clk_disable_unprepare.

Fixes: beca35d05c ("hwrng: nomadik - use clk_prepare_enable()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2022-03-14 14:45:44 +12:00
Jason A. Donenfeld
3e504d2026 random: check for signal and try earlier when generating entropy 
Rather than waiting a full second in an interruptable waiter before
trying to generate entropy, try to generate entropy first and wait
second. While waiting one second might give an extra second for getting
entropy from elsewhere, we're already pretty late in the init process
here, and whatever else is generating entropy will still continue to
contribute. This has implications on signal handling: we call
try_to_generate_entropy() from wait_for_random_bytes(), and
wait_for_random_bytes() always uses wait_event_interruptible_timeout()
when waiting, since it's called by userspace code in restartable
contexts, where signals can pend. Since try_to_generate_entropy() now
runs first, if a signal is pending, it's necessary for
try_to_generate_entropy() to check for signals, since it won't hit the
wait until after try_to_generate_entropy() has returned. And even before
this change, when entering a busy loop in try_to_generate_entropy(), we
should have been checking to see if any signals are pending, so that a
process doesn't get stuck in that loop longer than expected.

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 20:51:39 -07:00
Jason A. Donenfeld
7a7ff644ae random: reseed more often immediately after booting 
In order to chip away at the "premature first" problem, we augment our
existing entropy accounting with more frequent reseedings at boot.

The idea is that at boot, we're getting entropy from various places, and
we're not very sure which of early boot entropy is good and which isn't.
Even when we're crediting the entropy, we're still not totally certain
that it's any good. Since boot is the one time (aside from a compromise)
that we have zero entropy, it's important that we shepherd entropy into
the crng fairly often.

At the same time, we don't want a "premature next" problem, whereby an
attacker can brute force individual bits of added entropy. In lieu of
going full-on Fortuna (for now), we can pick a simpler strategy of just
reseeding more often during the first 5 minutes after boot. This is
still bounded by the 256-bit entropy credit requirement, so we'll skip a
reseeding if we haven't reached that, but in case entropy /is/ coming
in, this ensures that it makes its way into the crng rather rapidly
during these early stages.

Ordinarily we reseed if the previous reseeding is 300 seconds old. This
commit changes things so that for the first 600 seconds of boot time, we
reseed if the previous reseeding is uptime / 2 seconds old. That means
that we'll reseed at the very least double the uptime of the previous
reseeding.

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 20:51:21 -07:00
Jason A. Donenfeld
a96cfe2d42 random: make consistent usage of crng_ready() 
Rather than sometimes checking `crng_init < 2`, we should always use the
crng_ready() macro, so that should we change anything later, it's
consistent. Additionally, that macro already has a likely() around it,
which means we don't need to open code our own likely() and unlikely()
annotations.

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:56 -07:00
Jason A. Donenfeld
f5eab0e2db random: use SipHash as interrupt entropy accumulator 
The current fast_mix() function is a piece of classic mailing list
crypto, where it just sort of sprung up by an anonymous author without a
lot of real analysis of what precisely it was accomplishing. As an ARX
permutation alone, there are some easily searchable differential trails
in it, and as a means of preventing malicious interrupts, it completely
fails, since it xors new data into the entire state every time. It can't
really be analyzed as a random permutation, because it clearly isn't,
and it can't be analyzed as an interesting linear algebraic structure
either, because it's also not that. There really is very little one can
say about it in terms of entropy accumulation. It might diffuse bits,
some of the time, maybe, we hope, I guess. But for the most part, it
fails to accomplish anything concrete.

As a reminder, the simple goal of add_interrupt_randomness() is to
simply accumulate entropy until ~64 interrupts have elapsed, and then
dump it into the main input pool, which uses a cryptographic hash.

It would be nice to have something cryptographically strong in the
interrupt handler itself, in case a malicious interrupt compromises a
per-cpu fast pool within the 64 interrupts / 1 second window, and then
inside of that same window somehow can control its return address and
cycle counter, even if that's a bit far fetched. However, with a very
CPU-limited budget, actually doing that remains an active research
project (and perhaps there'll be something useful for Linux to come out
of it). And while the abundance of caution would be nice, this isn't
*currently* the security model, and we don't yet have a fast enough
solution to make it our security model. Plus there's not exactly a
pressing need to do that. (And for the avoidance of doubt, the actual
cluster of 64 accumulated interrupts still gets dumped into our
cryptographically secure input pool.)

So, for now we are going to stick with the existing interrupt security
model, which assumes that each cluster of 64 interrupt data samples is
mostly non-malicious and not colluding with an infoleaker. With this as
our goal, we have a few more choices, simply aiming to accumulate
entropy, while discarding the least amount of it.

We know from <https://eprint.iacr.org/2019/198> that random oracles,
instantiated as computational hash functions, make good entropy
accumulators and extractors, which is the justification for using
BLAKE2s in the main input pool. As mentioned, we don't have that luxury
here, but we also don't have the same security model requirements,
because we're assuming that there aren't malicious inputs. A
pseudorandom function instance can approximately behave like a random
oracle, provided that the key is uniformly random. But since we're not
concerned with malicious inputs, we can pick a fixed key, which is not
secret, knowing that "nature" won't interact with a sufficiently chosen
fixed key by accident. So we pick a PRF with a fixed initial key, and
accumulate into it continuously, dumping the result every 64 interrupts
into our cryptographically secure input pool.

For this, we make use of SipHash-1-x on 64-bit and HalfSipHash-1-x on
32-bit, which are already in use in the kernel's hsiphash family of
functions and achieve the same performance as the function they replace.
It would be nice to do two rounds, but we don't exactly have the CPU
budget handy for that, and one round alone is already sufficient.

As mentioned, we start with a fixed initial key (zeros is fine), and
allow SipHash's symmetry breaking constants to turn that into a useful
starting point. Also, since we're dumping the result (or half of it on
64-bit so as to tax our hash function the same amount on all platforms)
into the cryptographically secure input pool, there's no point in
finalizing SipHash's output, since it'll wind up being finalized by
something much stronger. This means that all we need to do is use the
ordinary round function word-by-word, as normal SipHash does.
Simplified, the flow is as follows:

Initialize:

    siphash_state_t state;
    siphash_init(&state, key={0, 0, 0, 0});

Update (accumulate) on interrupt:

    siphash_update(&state, interrupt_data_and_timing);

Dump into input pool after 64 interrupts:

    blake2s_update(&input_pool, &state, sizeof(state) / 2);

The result of all of this is that the security model is unchanged from
before -- we assume non-malicious inputs -- yet we now implement that
model with a stronger argument. I would like to emphasize, again, that
the purpose of this commit is to improve the existing design, by making
it analyzable, without changing any fundamental assumptions. There may
well be value down the road in changing up the existing design, using
something cryptographically strong, or simply using a ring buffer of
samples rather than having a fast_mix() at all, or changing which and
how much data we collect each interrupt so that we can use something
linear, or a variety of other ideas. This commit does not invalidate the
potential for those in the future.

For example, in the future, if we're able to characterize the data we're
collecting on each interrupt, we may be able to inch toward information
theoretic accumulators. <https://eprint.iacr.org/2021/523> shows that `s
= ror32(s, 7) ^ x` and `s = ror64(s, 19) ^ x` make very good
accumulators for 2-monotone distributions, which would apply to
timestamp counters, like random_get_entropy() or jiffies, but would not
apply to our current combination of the two values, or to the various
function addresses and register values we mix in. Alternatively,
<https://eprint.iacr.org/2021/1002> shows that max-period linear
functions with no non-trivial invariant subspace make good extractors,
used in the form `s = f(s) ^ x`. However, this only works if the input
data is both identical and independent, and obviously a collection of
address values and counters fails; so it goes with theoretical papers.
Future directions here may involve trying to characterize more precisely
what we actually need to collect in the interrupt handler, and building
something specific around that.

However, as mentioned, the morass of data we're gathering at the
interrupt handler presently defies characterization, and so we use
SipHash for now, which works well and performs well.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:56 -07:00
Jason A. Donenfeld
f3c2682bad random: provide notifier for VM fork 
Drivers such as WireGuard need to learn when VMs fork in order to clear
sessions. This commit provides a simple notifier_block for that, with a
register and unregister function. When no VM fork detection is compiled
in, this turns into a no-op, similar to how the power notifier works.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:56 -07:00
Jason A. Donenfeld
5acd35487d random: replace custom notifier chain with standard one 
We previously rolled our own randomness readiness notifier, which only
has two users in the whole kernel. Replace this with a more standard
atomic notifier block that serves the same purpose with less code. Also
unexport the symbols, because no modules use it, only unconditional
builtins. The only drawback is that it's possible for a notification
handler returning the "stop" code to prevent further processing, but
given that there are only two users, and that we're unexporting this
anyway, that doesn't seem like a significant drawback for the
simplification we receive here.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:56 -07:00
Jason A. Donenfeld
a4107d34f9 random: do not export add_vmfork_randomness() unless needed 
Since add_vmfork_randomness() is only called from vmgenid.o, we can
guard it in CONFIG_VMGENID, similarly to how we do with
add_disk_randomness() and CONFIG_BLOCK. If we ever have multiple things
calling into add_vmfork_randomness(), we can add another shared Kconfig
symbol for that, but for now, this is good enough. Even though
add_vmfork_randomess() is a pretty small function, removing it means
that there are only calls to crng_reseed(false) and none to
crng_reseed(true), which means the compiler can constant propagate the
false, removing branches from crng_reseed() and its descendants.

Additionally, we don't even need the symbol to be exported if
CONFIG_VMGENID is not a module, so conditionalize that too.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:56 -07:00
Jason A. Donenfeld
ae099e8e98 random: add mechanism for VM forks to reinitialize crng 
When a VM forks, we must immediately mix in additional information to
the stream of random output so that two forks or a rollback don't
produce the same stream of random numbers, which could have catastrophic
cryptographic consequences. This commit adds a simple API, add_vmfork_
randomness(), for that, by force reseeding the crng.

This has the added benefit of also draining the entropy pool and setting
its timer back, so that any old entropy that was there prior -- which
could have already been used by a different fork, or generally gone
stale -- does not contribute to the accounting of the next 256 bits.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jann Horn <jannh@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:56 -07:00
Jason A. Donenfeld
77553cf8f4 random: don't let 644 read-only sysctls be written to 
We leave around these old sysctls for compatibility, and we keep them
"writable" for compatibility, but even after writing, we should keep
reporting the same value. This is consistent with how userspaces tend to
use sysctl_random_write_wakeup_bits, writing to it, and then later
reading from it and using the value.

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:56 -07:00
Jason A. Donenfeld
d0efdf35a6 random: give sysctl_random_min_urandom_seed a more sensible value 
This isn't used by anything or anywhere, but we can't delete it due to
compatibility. So at least give it the correct value of what it's
supposed to be instead of a garbage one.

Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:56 -07:00
Jason A. Donenfeld
6f98a4bfee random: block in /dev/urandom 
This topic has come up countless times, and usually doesn't go anywhere.
This time I thought I'd bring it up with a slightly narrower focus,
updated for some developments over the last three years: we finally can
make /dev/urandom always secure, in light of the fact that our RNG is
now always seeded.

Ever since Linus' 50ee7529ec ("random: try to actively add entropy
rather than passively wait for it"), the RNG does a haveged-style jitter
dance around the scheduler, in order to produce entropy (and credit it)
for the case when we're stuck in wait_for_random_bytes(). How ever you
feel about the Linus Jitter Dance is beside the point: it's been there
for three years and usually gets the RNG initialized in a second or so.

As a matter of fact, this is what happens currently when people use
getrandom(). It's already there and working, and most people have been
using it for years without realizing.

So, given that the kernel has grown this mechanism for seeding itself
from nothing, and that this procedure happens pretty fast, maybe there's
no point any longer in having /dev/urandom give insecure bytes. In the
past we didn't want the boot process to deadlock, which was
understandable. But now, in the worst case, a second goes by, and the
problem is resolved. It seems like maybe we're finally at a point when
we can get rid of the infamous "urandom read hole".

The one slight drawback is that the Linus Jitter Dance relies on random_
get_entropy() being implemented. The first lines of try_to_generate_
entropy() are:

	stack.now = random_get_entropy();
	if (stack.now == random_get_entropy())
		return;

On most platforms, random_get_entropy() is simply aliased to get_cycles().
The number of machines without a cycle counter or some other
implementation of random_get_entropy() in 2022, which can also run a
mainline kernel, and at the same time have a both broken and out of date
userspace that relies on /dev/urandom never blocking at boot is thought
to be exceedingly low. And to be clear: those museum pieces without
cycle counters will continue to run Linux just fine, and even
/dev/urandom will be operable just like before; the RNG just needs to be
seeded first through the usual means, which should already be the case
now.

On systems that really do want unseeded randomness, we already offer
getrandom(GRND_INSECURE), which is in use by, e.g., systemd for seeding
their hash tables at boot. Nothing in this commit would affect
GRND_INSECURE, and it remains the means of getting those types of random
numbers.

This patch goes a long way toward eliminating a long overdue userspace
crypto footgun. After several decades of endless user confusion, we will
finally be able to say, "use any single one of our random interfaces and
you'll be fine. They're all the same. It doesn't matter." And that, I
think, is really something. Finally all of those blog posts and
disagreeing forums and contradictory articles will all become correct
about whatever they happened to recommend, and along with it, a whole
class of vulnerabilities eliminated.

With very minimal downside, we're finally in a position where we can
make this change.

Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Guo Ren <guoren@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
 2022-03-12 18:00:55 -07:00
James Bottomley
fb5abce6b2 tpm: use try_get_ops() in tpm-space.c 
As part of the series conversion to remove nested TPM operations:

https://lore.kernel.org/all/20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/

exposure of the chip->tpm_mutex was removed from much of the upper
level code.  In this conversion, tpm2_del_space() was missed.  This
didn't matter much because it's usually called closely after a
converted operation, so there's only a very tiny race window where the
chip can be removed before the space flushing is done which causes a
NULL deref on the mutex.  However, there are reports of this window
being hit in practice, so fix this by converting tpm2_del_space() to
use tpm_try_get_ops(), which performs all the teardown checks before
acquring the mutex.

Cc: stable@vger.kernel.org # 5.4.x
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
 2022-03-10 01:47:25 +02:00
Lino Sanfilippo
7e0438f83d tpm: fix reference counting for struct tpm_chip 
The following sequence of operations results in a refcount warning:

1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.

------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac
sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4
brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes
raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm
snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]
CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14)
[<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8)
[<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108)
[<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4)
[<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc)
[<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0:                   00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0: 0000006c beafe648 0001056c b6eb6944
---[ end trace d4b8409def9b8b1f ]---

The reason for this warning is the attempt to get the chip->dev reference
in tpm_common_write() although the reference counter is already zero.

Since commit 8979b02aaf ("tpm: Fix reference count to main device") the
extra reference used to prevent a premature zero counter is never taken,
because the required TPM_CHIP_FLAG_TPM2 flag is never set.

Fix this by moving the TPM 2 character device handling from
tpm_chip_alloc() to tpm_add_char_device() which is called at a later point
in time when the flag has been set in case of TPM2.

Commit fdc915f7f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
already introduced function tpm_devs_release() to release the extra
reference but did not implement the required put on chip->devs that results
in the call of this function.

Fix this by putting chip->devs in tpm_chip_unregister().

Finally move the new implementation for the TPM 2 handling into a new
function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the
good case and error cases.

Cc: stable@vger.kernel.org
Fixes: fdc915f7f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Fixes: 8979b02aaf ("tpm: Fix reference count to main device")
Co-developed-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
 2022-03-08 13:55:52 +02:00
Gustavo A. R. Silva
2dd634664d tpm: xen-tpmfront: Use struct_size() helper 
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.

Also, address the following sparse warning:
drivers/char/tpm/xen-tpmfront.c:131:16: warning: using sizeof on a flexible structure

Link: https://github.com/KSPP/linux/issues/160
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
 2022-03-08 10:33:18 +02:00
Tadeusz Struk
2e8e4c8f66 tpm: Fix error handling in async work 
When an invalid (non existing) handle is used in a TPM command,
that uses the resource manager interface (/dev/tpmrm0) the resource
manager tries to load it from its internal cache, but fails and
the tpm_dev_transmit returns an -EINVAL error to the caller.
The existing async handler doesn't handle these error cases
currently and the condition in the poll handler never returns
mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck
until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions
returned from tpm_dev_transmit they are also reflected in the poll mask
and a correct error code could passed back to the caller.

Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-integrity@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>

Fixes: 9e1b74a63f ("tpm: add support for nonblocking operation")
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
 2022-03-08 10:33:17 +02:00
Michael S. Tsirkin
0e7174b9d5 virtio_console: break out of buf poll on remove 
A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..

reset prevents new interrupts from arriving and waits for interrupt
handlers to finish.

However if - as is common - the handler queues a work request which is
flushed during the cleanup stage, we have code adding buffers / trying
to get buffers while device is reset. Not good.

This was reproduced by running
	modprobe virtio_console
	modprobe -r virtio_console
in a loop.

Fix this up by calling virtio_break_device + flush before reset.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 2022-03-04 08:33:22 -05:00
Wan Jiabing
e6205ad58a hwrng: cavium - fix NULL but dereferenced coccicheck error 
Fix following coccicheck warning:
./drivers/char/hw_random/cavium-rng-vf.c:182:17-20: ERROR:
pdev is NULL but dereferenced.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2022-03-03 10:49:22 +12:00
Claudiu Beznea
53e748c275 hwrng: atmel - remove extra line 
Remove extra line.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2022-03-03 10:46:19 +12:00
Claudiu Beznea
c4f51eab6c hwrng: atmel - add runtime pm support 
Add runtime PM support.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2022-03-03 10:46:19 +12:00
Claudiu Beznea
b953188525 hwrng: atmel - use __maybe_unused and pm_ptr() for pm ops 
Use __maybe_unused and pm_ptr() for pm ops.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2022-03-03 10:46:19 +12:00
Claudiu Beznea
9fbd8b306f hwrng: atmel - move set of TRNG_HALFR in atmel_trng_init() 
Move set of TRNG_HALFR in atmel_trng_init() as this function is
also called on resume path. In case of SAMA7G5 where backup and
self-refresh PM mode is available most of the SoC parts are
powered of (including TRNG) when entering suspend. In that case
on resuming path TRNG_HALFR should also be re-configured.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2022-03-03 10:46:19 +12:00