When signals are hard-blocked in order to do time-travel
socket processing, we set signals_blocked and then handle
SIGIO signals by setting the SIGIO bit in signals_pending.
When unblocking, we first set signals_blocked to 0, and
then handle all pending signals. We have to set it first,
so that we can again properly block/unblock inside the
unblock, if the time-travel handlers need to be processed.
Unfortunately, this is racy. We can get into this situation:
// signals_pending = SIGIO_MASK
unblock_signals_hard()
signals_blocked = 0;
if (signals_pending && signals_enabled) {
block_signals();
unblock_signals()
...
sig_handler_common(SIGIO, NULL, NULL);
sigio_handler()
...
sigio_reg_handler()
irq_do_timetravel_handler()
reg->timetravel_handler() ==
vu_req_interrupt_comm_handler()
vu_req_read_message()
vhost_user_recv_req()
vhost_user_recv()
vhost_user_recv_header()
// reads 12 bytes header of
// 20 bytes message
<-- receive SIGIO here <--
sig_handler()
int enabled = signals_enabled; // 1
if ((signals_blocked || !enabled) && (sig == SIGIO)) {
if (!signals_blocked && time_travel_mode == TT_MODE_EXTERNAL)
sigio_run_timetravel_handlers()
_sigio_handler()
sigio_reg_handler()
... as above ...
vhost_user_recv_header()
// reads 8 bytes that were message payload
// as if it were header - but aborts since
// it then gets -EAGAIN
...
--> end signal handler -->
// continue in vhost_user_recv()
// full_read() for 8 bytes payload busy loops
// entire process hangs here
Conceptually, to fix this, we need to ensure that the
signal handler cannot run while we hard-unblock signals.
The thing that makes this more complex is that we can be
doing hard-block/unblock while unblocking. Introduce a
new signals_blocked_pending variable that we can keep at
non-zero as long as pending signals are being processed,
then we only need to ensure it's decremented safely and
the signal handler will only increment it if it's already
non-zero (or signals_blocked is set, of course.)
Note also that only the outermost call to hard-unblock is
allowed to decrement signals_blocked_pending, since it
could otherwise reach zero in an inner call, and leave
the same race happening if the timetravel_handler loops,
but that's basically required of it.
Fixes: d6b399a0e0 ("um: time-travel/signals: fix ndelay() in interrupt")
Link: https://patch.msgid.link/20240703110144.28034-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With ARCH=um, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/um/drivers/harddog.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240702-md-um-arch-um-drivers-v1-1-79e4f50b5bab@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With external time travel, a LOT of message can end up
being exchanged on the socket, taking a significant
amount of time just to do that.
Add a new shared memory optimisation to that, where a
number of changes are made:
- the controller sends a client ID and a shared memory FD
(and a logging FD we don't use) in the ACK message to
the initial START
- the shared memory holds the current time and the
free_until value, so that there's no need to exchange
messages for that
- if the client that's running has shared memory support,
any client (the running one included) can request the
next time it wants to run inside the shared memory,
rather than sending a message, by also updating the
free_until value
- when shared memory is enabled, RUN/WAIT messages no
longer have an ACK, further cutting down on messages
Together, this can reduce the number of messages very
significantly, and reduce overall test/simulation run time.
Co-developed-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://patch.msgid.link/20240702192118.6ad0a083f574.Ie41206c8ce4507fe26b991937f47e86c24ca7a31@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a message type to the time-travel protocol to broadcast
a small (64-bit) value to all participants in a simulation.
The main use case is to have an identical message come to
all participants in a simulation, e.g. to separate out logs
for different tests running in a single simulation.
Down in the guts of time_travel_handle_message() we can't
use printk() and not even printk_deferred(), so just store
the message and print it at the start of the userspace()
function.
Unfortunately this means that other prints in the kernel
can actually bypass the message, but in most cases where
this is used, for example to separate test logs, userspace
will be involved. Also, even if we could use
printk_deferred(), we'd still need to flush it out in the
userspace() function since otherwise userspace messages
might cross it.
As a result, this is a reasonable compromise, there's no
need to have any core changes and it solves the main use
case we have for it.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://patch.msgid.link/20240702192118.c4093bc5b15e.I2ca8d006b67feeb866ac2017af7b741c9e06445a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current calculation of max_low_pfn is introduced in commit af84eab208
("[PATCH] uml: fix LVM crash"). It is intended to set max_low_pfn to the
same value as max_pfn.
But I am not sure why the max_pfn is set to totalram_pages, which
represents the number of usable pages in system instead of an absolute
page frame number. (The change history stops there.)
While we have already calculate it in setup_physmem(), so not necessary
to do it again.
Also this would help changing totalram_pages accounting, since we plan
to move the accounting into __free_pages_core(). With this change,
totalram_pages may not represent the total usable pages at this point,
since some pages would be deferred initialized.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Alasdair G Kergon <agk@redhat.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Mike Rapoport (IBM) <rppt@kernel.org>
CC: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://patch.msgid.link/20240615034150.2958-1-richard.weiyang@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At present, Rust in the kernel only supports 64-bit x86, so UML has
followed suit. However, it's significantly easier to support 32-bit i386
on UML than on bare metal, as UML does not use the -mregparm option
(which alters the ABI), which is not yet supported by rustc[1].
Add support for CONFIG_RUST on um/i386, by adding a new target config to
generate_rust_target, and replacing various checks on CONFIG_X86_64 to
also support CONFIG_X86_32.
We still use generate_rust_target, rather than a built-in rustc target,
in order to match x86_64, provide a future place for -mregparm, and more
easily disable floating point instructions.
With these changes, the KUnit tests pass with:
kunit.py run --make_options LLVM=1 --kconfig_add CONFIG_RUST=y
--kconfig_add CONFIG_64BIT=n --kconfig_add CONFIG_FORTIFY_SOURCE=n
An earlier version of these changes was proposed on the Rust-for-Linux
github[2].
[1]: https://github.com/rust-lang/rust/issues/116972
[2]: https://github.com/Rust-for-Linux/linux/pull/966
Signed-off-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20240604224052.3138504-1-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently /proc/sysemu will never be registered, as sysemu_supported
is initialized to zero implicitly and no code updates it. And there is
also nothing to configure via sysemu in UML anymore.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240527134024.1539848-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit fb5d1d389c ("ubd: open the backing files in ubd_add")
removed the last use of ubd_mutex.
Remove it.
Build and kernel startup test only.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20240505001508.255096-1-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. UML supports these via its UML_IOMEM_EMULATION so let that
select HAS_IOPORT and also reflect this in NO_IOPORT_MAP.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://patch.msgid.link/20240403124300.65379-2-schnelle@linux.ibm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove the pcap driver in UML. It is obsolete. It does not build on
recent systems due to changes in libpcap and its dependencies.
The vector driver's raw transport in UML provides identical
functionality.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://patch.msgid.link/20240328132424.376456-1-anton.ivanov@cambridgegreys.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When in time-travel mode (infinite-cpu or external) time should not pass
for writing to the console. As such, it makes sense to put the FD for
the output side into blocking mode and simply let any write to it hang.
If we did not do this, then time could pass waiting for the console to
become writable again. This is not desirable as it has random effects on
the clock between runs.
Implement this by duplicating the FD if output is active in a relevant
mode and setting the duplicate to be blocking. This avoids changing the
input channel to be blocking should it exists. After this, use the
blocking FD for all write operations and do not allocate an IRQ it is
set.
Without time-travel mode fd_out will always match fd_in and IRQs are
registered.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20231018123643.1255813-4-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the next commit, we are going to set the output FD to be blocking.
Once that is done, the write() may be short if an interrupt happens
while it is writing out data. As such, to properly catch an EINTR error,
we need to retry the write.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20231018123643.1255813-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the read/write function returns an error then we expect to see an
event/IRQ later on. However, this will only happen after an EAGAIN as we
are using edge based event triggering.
As such, EINTR needs to be caught should it happen.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20231018123643.1255813-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When in time-travel mode, the eventfd events are read even when signals
are blocked as SIGIO still needs to be processed. In this case, the
event is cleared on the eventfd but the IRQ still needs to be fired
later.
We did already ensure that the SIGIO handler is run again. However, the
FDs are configured to be level triggered, so that eventfd will not
notify again. As such, add some logic to mark the IRQ as pending and
process it at the next opportunity.
To avoid duplication, reuse the logic used for the suspend/resume case.
This does not really change anything except for delaying running the
IRQs with timetravel_handler at a slightly later point in time (and
possibly running non-timetravel IRQs that shouldn't happen earlier).
While at it, move marking as pending into irq_event_handler as that is
the more logical place for it to happen.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20231018123643.1255813-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Fixes for -Wmissing-prototypes warnings and further cleanup
- Remove callback returning void from rtc and virtio drivers
- Fix bash location
-----BEGIN PGP SIGNATURE-----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=umlG
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Fixes for -Wmissing-prototypes warnings and further cleanup
- Remove callback returning void from rtc and virtio drivers
- Fix bash location
* tag 'uml-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (26 commits)
um: virtio_uml: Convert to platform remove callback returning void
um: rtc: Convert to platform remove callback returning void
um: Remove unused do_get_thread_area function
um: Fix -Wmissing-prototypes warnings for __vdso_*
um: Add an internal header shared among the user code
um: Fix the declaration of kasan_map_memory
um: Fix the -Wmissing-prototypes warning for get_thread_reg
um: Fix the -Wmissing-prototypes warning for __switch_mm
um: Fix -Wmissing-prototypes warnings for (rt_)sigreturn
um: Stop tracking host PID in cpu_tasks
um: process: remove unused 'n' variable
um: vector: remove unused len variable/calculation
um: vector: fix bpfflash parameter evaluation
um: slirp: remove set but unused variable 'pid'
um: signal: move pid variable where needed
um: Makefile: use bash from the environment
um: Add winch to winch_handlers before registering winch IRQ
um: Fix -Wmissing-prototypes warnings for __warp_* and foo
um: Fix -Wmissing-prototypes warnings for text_poke*
um: Move declarations to proper headers
...
Several new features here:
- virtio-net is finally supported in vduse.
- Virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmZN570PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2JUH/1K3fZOHymop6Y5Z3USFS7YdlF+dniedY/vg
TKyWERkXOlxq1d9DVxC0mN7tk72DweuWI0YJjLXofrEW1VuW29ecSbyFXxpeWJls
b7ErffxDAFRas5jkMCngD8TuFnbEegU0mGP5kbiHpEndBydQ2hH99Gg0x7swW+cE
xsvU5zonCCLwLGIP2DrVrn9qGOHtV6o8eZfVKDVXfvicn3lFBkUSxlwEYsO9RMup
aKxV4FT2Pb1yBicwBK4TH1oeEXqEGy1YLEn+kAHRbgoC/5L0/LaiqrkzwzwwOIPj
uPGkacf8CIbX0qZo5EzD8kvfcYL1xhU3eT9WBmpp2ZwD+4bINd4=
=nax1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
virtio core already sets the .owner, so driver does not need to.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-5-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are a few cross-architecture cleanup patches:
- Thomas Zimmermann works on separating fbdev support from the asm/video.h
contents that may be used by either the old fbdev drivers or the
newer drm display code.
- Thorsten Blum contributes cleanups for the generic bitops code
and asm-generic/bug.h
- I remove the orphaned include/asm-generic/page.h header that used to
included by long-removed mmu-less architectures.
-----BEGIN PGP SIGNATURE-----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=riCs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"These are a few cross-architecture cleanup patches:
- separate out fbdev support from the asm/video.h contents that may
be used by either the old fbdev drivers or the newer drm display
code (Thomas Zimmermann)
- cleanups for the generic bitops code and asm-generic/bug.h
(Thorsten Blum)
- remove the orphaned include/asm-generic/page.h header that used to
be included by long-removed mmu-less architectures (me)"
* tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: Fix name collision with ACPI's video.o
bug: Improve comment
asm-generic: remove unused asm-generic/page.h
arch: Rename fbdev header and source files
arch: Remove struct fb_info from video helpers
arch: Select fbdev helpers with CONFIG_VIDEO
bitops: Change function return types from long to int
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The per-architecture fbdev code has no dependencies on fbdev and can
be used for any video-related subsystem. Rename the files to 'video'.
Use video-sti.c on parisc as the source file depends on CONFIG_STI_CORE.
On arc, arm, arm64, sh, and um the asm header file is an empty wrapper
around the file in asm-generic. Let Kbuild generate the file. The build
system does this automatically. Only um needs to generate video.h
explicitly, so that it overrides the host architecture's header. The
latter would otherwise interfere with the build.
Further update all includes statements, include guards, and Makefiles.
Also update a few strings and comments to refer to video instead of
fbdev.
v3:
- arc, arm, arm64, sh: generate asm header via build system (Sam,
Helge, Arnd)
- um: rename fb.h to video.h
- fix typo in commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Move relevant declarations to this header. This will address
below -Wmissing-prototypes warnings:
arch/um/os-Linux/elf_aux.c:26:13: warning: no previous prototype for ‘scan_elf_aux’ [-Wmissing-prototypes]
arch/um/os-Linux/mem.c:213:13: warning: no previous prototype for ‘check_tmpexec’ [-Wmissing-prototypes]
arch/um/os-Linux/skas/process.c:107:6: warning: no previous prototype for ‘wait_stub_done’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Make it match its definition (size_t vs unsigned long). And declare
it in a shared header to fix the -Wmissing-prototypes warning, as it
is defined in the user code and called in the kernel code.
Fixes: 5b301409e8 ("UML: add support for KASAN under x86_64")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The get_thread_reg function is defined in the user code, and is
called by the kernel code. It should be declared in a shared header.
Fixes: dbba7f704a ("um: stop polluting the namespace with registers.h contents")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The __switch_mm function is defined in the user code, and is called
by the kernel code. It should be declared in a shared header.
Fixes: 4dc706c2f2 ("um: take um_mmu.h to asm/mmu.h, clean asm/mmu_context.h a bit")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The host PID tracked in 'cpu_tasks' is no longer used. Stopping
tracking it will also save some cycles.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This wrapps all external vmalloc allocation functions with the
alloc_hooks() wrapper, and switches internal allocations to _noprof
variants where appropriate, for the new memory allocation profiling
feature.
[surenb@google.com: arch/um: fix forward declaration for vmalloc]
Link: https://lkml.kernel.org/r/20240326073750.726636-1-surenb@google.com
[surenb@google.com: undo _noprof additions in the documentation]
Link: https://lkml.kernel.org/r/20240326231453.1206227-5-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-31-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The return value of fn() wasn't used for a long time,
so no need to assign it to a variable, addressing a
W=1 warning.
This seems to be - with patches from others posted to
the list before - the last W=1 warning in arch/um/.
Fixes: 22e2430d60 ("x86, um: convert to saner kernel_execve() semantics")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The len variable is unused, so not needed, remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
With W=1 the build complains about a pointer compared to
zero, clearly the result should've been compared.
Fixes: 9807019a62 ("um: Loadable BPF "Firmware" for vector drivers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The code doesn't use 'pid' here, just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Set Makefile SHELL to bash instead of /bin/bash for better portability.
Some systems do not install binaries to /bin, and therefore do not
provide /bin/bash. This includes Linux distros which intentionally avoid
implementing the Filesystem Hierarchy Standard (FHS), such as NixOS and
Guix System.
The recipies inside arch/um/Makefile don't require top-level Bash to
build, and setting "SHELL" to "bash" makes Make pick the Bash executable
from the environment, hence this patch.
Changes since last roll:
- Rebase onto a more recent commit on the master branch.
- Remove a dangling in-text citation from the change log.
- Reword the change log.
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net
Signed-off-by: Richard Weinberger <richard@nod.at>
Registering a winch IRQ is racy, an interrupt may occur before the winch is
added to the winch_handlers list.
If that happens, register_winch_irq() adds to that list a winch that is
scheduled to be (or has already been) freed, causing a panic later in
winch_cleanup().
Avoid the race by adding the winch to the winch_handlers list before
registering the IRQ, and rolling back if um_request_irq() fails.
Fixes: 42a359e31a ("uml: SIGIO support cleanup")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
These functions are not called explicitly. Let's just workaround
the -Wmissing-prototypes warnings by declaring them locally similar
to what was done in arch/x86/kernel/asm-offsets_32.c.
This will address below -Wmissing-prototypes warnings:
./arch/x86/um/shared/sysdep/kernel-offsets.h:9:6: warning: no previous prototype for ‘foo’ [-Wmissing-prototypes]
arch/um/os-Linux/main.c:187:7: warning: no previous prototype for ‘__wrap_malloc’ [-Wmissing-prototypes]
arch/um/os-Linux/main.c:208:7: warning: no previous prototype for ‘__wrap_calloc’ [-Wmissing-prototypes]
arch/um/os-Linux/main.c:222:6: warning: no previous prototype for ‘__wrap_free’ [-Wmissing-prototypes]
arch/x86/um/user-offsets.c:17:6: warning: no previous prototype for ‘foo’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The prototypes for text_poke* are declared in asm/text-patching.h
under arch/x86/include/. It's safe to include this header, as it's
UML-aware (by checking CONFIG_UML_X86).
This will address below -Wmissing-prototypes warnings:
arch/um/kernel/um_arch.c:461:7: warning: no previous prototype for ‘text_poke’ [-Wmissing-prototypes]
arch/um/kernel/um_arch.c:473:6: warning: no previous prototype for ‘text_poke_sync’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This will address below -Wmissing-prototypes warnings:
arch/um/kernel/initrd.c:18:12: warning: no previous prototype for ‘read_initrd’ [-Wmissing-prototypes]
arch/um/kernel/um_arch.c:408:19: warning: no previous prototype for ‘read_initrd’ [-Wmissing-prototypes]
arch/um/os-Linux/start_up.c:301:12: warning: no previous prototype for ‘parse_iomem’ [-Wmissing-prototypes]
arch/x86/um/ptrace_32.c:15:6: warning: no previous prototype for ‘arch_switch_to’ [-Wmissing-prototypes]
arch/x86/um/ptrace_32.c:101:5: warning: no previous prototype for ‘poke_user’ [-Wmissing-prototypes]
arch/x86/um/ptrace_32.c:153:5: warning: no previous prototype for ‘peek_user’ [-Wmissing-prototypes]
arch/x86/um/ptrace_64.c:111:5: warning: no previous prototype for ‘poke_user’ [-Wmissing-prototypes]
arch/x86/um/ptrace_64.c:171:5: warning: no previous prototype for ‘peek_user’ [-Wmissing-prototypes]
arch/x86/um/syscalls_64.c:48:6: warning: no previous prototype for ‘arch_switch_to’ [-Wmissing-prototypes]
arch/x86/um/tls_32.c:184:5: warning: no previous prototype for ‘arch_switch_tls’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This will address below -Wmissing-prototypes warnings:
arch/um/kernel/mem.c:202:8: warning: no previous prototype for ‘pgd_alloc’ [-Wmissing-prototypes]
arch/um/kernel/mem.c:215:7: warning: no previous prototype for ‘uml_kmalloc’ [-Wmissing-prototypes]
arch/um/kernel/process.c:207:6: warning: no previous prototype for ‘arch_cpu_idle’ [-Wmissing-prototypes]
arch/um/kernel/process.c:328:15: warning: no previous prototype for ‘arch_align_stack’ [-Wmissing-prototypes]
arch/um/kernel/reboot.c:45:6: warning: no previous prototype for ‘machine_restart’ [-Wmissing-prototypes]
arch/um/kernel/reboot.c:51:6: warning: no previous prototype for ‘machine_power_off’ [-Wmissing-prototypes]
arch/um/kernel/reboot.c:57:6: warning: no previous prototype for ‘machine_halt’ [-Wmissing-prototypes]
arch/um/kernel/skas/mmu.c:17:5: warning: no previous prototype for ‘init_new_context’ [-Wmissing-prototypes]
arch/um/kernel/skas/mmu.c:60:6: warning: no previous prototype for ‘destroy_context’ [-Wmissing-prototypes]
arch/um/kernel/skas/process.c:36:12: warning: no previous prototype for ‘start_uml’ [-Wmissing-prototypes]
arch/um/kernel/time.c:807:15: warning: no previous prototype for ‘calibrate_delay_is_known’ [-Wmissing-prototypes]
arch/um/kernel/tlb.c:594:6: warning: no previous prototype for ‘force_flush_all’ [-Wmissing-prototypes]
arch/x86/um/bugs_32.c:22:6: warning: no previous prototype for ‘arch_check_bugs’ [-Wmissing-prototypes]
arch/x86/um/bugs_32.c:44:6: warning: no previous prototype for ‘arch_examine_signal’ [-Wmissing-prototypes]
arch/x86/um/bugs_64.c:9:6: warning: no previous prototype for ‘arch_check_bugs’ [-Wmissing-prototypes]
arch/x86/um/bugs_64.c:13:6: warning: no previous prototype for ‘arch_examine_signal’ [-Wmissing-prototypes]
arch/x86/um/elfcore.c:10:12: warning: no previous prototype for ‘elf_core_extra_phdrs’ [-Wmissing-prototypes]
arch/x86/um/elfcore.c:15:5: warning: no previous prototype for ‘elf_core_write_extra_phdrs’ [-Wmissing-prototypes]
arch/x86/um/elfcore.c:42:5: warning: no previous prototype for ‘elf_core_write_extra_data’ [-Wmissing-prototypes]
arch/x86/um/elfcore.c:63:8: warning: no previous prototype for ‘elf_core_extra_data_size’ [-Wmissing-prototypes]
arch/x86/um/fault.c:18:5: warning: no previous prototype for ‘arch_fixup’ [-Wmissing-prototypes]
arch/x86/um/os-Linux/mcontext.c:7:6: warning: no previous prototype for ‘get_regs_from_mc’ [-Wmissing-prototypes]
arch/x86/um/os-Linux/tls.c:22:6: warning: no previous prototype for ‘check_host_supports_tls’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Make it match the declaration in asm-generic/switch_to.h. And
also include the header to allow the compiler to check it.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
These functions are not used anymore. Removing them will also address
below -Wmissing-prototypes warnings:
arch/um/kernel/process.c:51:5: warning: no previous prototype for ‘pid_to_processor_id’ [-Wmissing-prototypes]
arch/um/kernel/process.c:253:5: warning: no previous prototype for ‘copy_to_user_proc’ [-Wmissing-prototypes]
arch/um/kernel/process.c:263:5: warning: no previous prototype for ‘clear_user_proc’ [-Wmissing-prototypes]
arch/um/kernel/tlb.c:579:6: warning: no previous prototype for ‘flush_tlb_mm_range’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The definition of vfree has changed since commit b3bdda02aa
("vmalloc: add const to void* parameters"). Update the declaration
of vfree in um_malloc.h to match the latest definition.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This will also fix the warnings like:
warning: no previous prototype for ‘fork_handler’ [-Wmissing-prototypes]
140 | void fork_handler(void)
| ^~~~~~~~~~~~
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
