(controllers set the flag, but there is no client to use it). Also,
CLASS_SPD support gets simplified to prepare removal in the future.
Class based instantiation is not recommended these days anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it. Then, there are also
quite some driver updates. Standing out are patches for the wmt-driver
which is refactored to support more variants. This is the rebased pull
request where a large series for the designware driver was dropped.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmWph0UPHHdzYUBrZXJu
ZWwub3JnAAoJEBQN5MwUoCm2kbIQAJotSmX0mM+nNPReYCMMiloxoxUwgpiErNwY
WDrYQSezthAJ1LDsGOEeLcE4f4I+UcUHBO1BoERtOZg3cGtE0Ii5N845sp100S9O
ktyaKS5utoErymThWFFrnZX60/8yKXUMzZmNzy96560gPcxbFyyyVhKfBSPzK9T+
O8CGu7GRNqgWHlvH3yqGeCbreWYrYVSrluEpBu6807cp3zDxrU+autOnsewm5+md
ka3DdqrbxJSblYK8fJKESAUgkRmZgYKbgl0iiCuqX+ib6I4OA3Z68ny7dl0fY3Ws
vwt7d88SaBKDdJmUZyb/sm4aJsW69GN+ECZolxrn4TIw45k4tes2s6Ma5+TV3E9h
Fd1RuqduFEqQ7cj31UPe2x8rgj5Fo5nbjCWxdZv+/3zF8+cHwi8iwkp2PScsPCsa
fmCdehUE5DrgobsRNANe6XJzxY5wp2VNpGEWKeaQz2Z0/d9T1YFS7a8aewvhXoPC
isZboi6GQh2XoE8UgGJa29VUuaIkUW513DwCGw8mz1yKN+kHGcsRXXjkjaZoQn3U
MMvh/zkI2Hpy/m2R8PWeIq5XhLJvmlZ19JJzUHJIjXh9Fn9EVtXhlUleh6mzMfeM
n8NOg7Eukep2sBgmaufkUKz2Jtogs59YDSXZEvqJjIkPM2Wi0hA18Qj+pilES1ff
3ckk3mxY
=8D3Q
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
The stm32mp25 has only a single interrupt line used for both
events and errors. In order to cope with that, reorganise the
error handling code so that it can be called either from the
common handler (used in case of SoC having only a single IT line)
and the error handler for others.
The CR1 register also embeds a new FMP bit, necessary when running
at Fast Mode Plus frequency. This bit should be used instead of
the SYSCFG bit used on other platforms.
Add a new compatible to distinguish between the SoCs and two
boolean within the setup structure in order to know if the
platform has a single/multiple IT lines and if the FMP bit
within CR1 is available or not.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Move readl_relaxed of I2C_ISR register at beginning of event isr
so that it done once for both master & slave handling.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Avoid usage of __func__ when reporting an error message
since dev_err/dev_dbg are already providing enough details
to identify the source of the message.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The irq handling is currently split between the irq handler
and the threaded irq handler. Some of the handling (such as
dma related stuffs) done within the irq handler might sleep or
take some time leading to issues if the kernel is built with
realtime constraints. In order to fix that, perform an overall
rework to perform most of the job within the threaded handler
and only keep fifo access in the non threaded handler.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert error handling upon calls of devm_request_irq functions during
the probe of the driver.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
On the Dell XPS 15 7590/0VYV0G, BIOS 1.24.0 09/11/2023, Linux prints the
warning below.
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
Following the same suggestions by Wolfram Sang as for the Dell Precision
3540 [1], the accelerometer can be successfully found on I2C bus 2 at
address 0x29.
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device
lis3lv02d 0x29
$ dmesg | tail -5
[ 549.522876] lis3lv02d_i2c 2-0029: supply Vdd not found, using dummy regulator
[ 549.522904] lis3lv02d_i2c 2-0029: supply Vdd_IO not found, using dummy regulator
[ 549.542486] lis3lv02d: 8 bits 3DC sensor found
[ 549.630022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input35
[ 549.630586] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29
So, the device has that accelerometer. Add the I2C address to the
mapping list, and test it successfully on the device.
[1]: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
On the Dell Precision 3540/0M14W7, BIOS 1.7.4 05/12/2020, Linux prints
the warning below.
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
With the help of Wolfram Sang, the test to probe it on I2C bus 6 at address
0x29 was successful.
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-6/new_device
[ 2110.787000] i2c i2c-6: new_device: Instantiated device lis3lv02d at 0x29
[ 2110.791932] lis3lv02d_i2c 6-0029: supply Vdd not found, using dummy regulator
[ 2110.791981] lis3lv02d_i2c 6-0029: supply Vdd_IO not found, using dummy regulator
[ 2110.809233] lis3lv02d: 8 bits 3DC sensor found
[ 2110.900668] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23
So, the device has that accelerometer. Add the I2C address to the
mapping list.
Link: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
[wsa: shortened commit message a little]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
These Settings for the same register, REG_CR,
can be put together to reduce code redundancy.
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use more appropriate parameter passing to reduce the amount of code
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The frequency setting mode is adjusted to reduce the code redundancy,
and it is also convenient to share with zhaoxin
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Put the handling of interrupt events in a function class
to reduce code redundancy.
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Put wmt_i2c_wait_bus_not_busy() in a more appropriate place
to reduce code redundancy
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Legacy class-based device auto-detection shouldn't be used in new code.
Therefore remove support in i2c-mux-reg as long as we don't have a
user of this feature yet.
Link: https://lore.kernel.org/linux-i2c/a22978a4-88e4-46f4-b71c-032b22321599@gmail.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Now that the driver core can properly handle constant struct bus_type,
move the i2c_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Note, the sound/soc/rockchip/rk3399_gru_sound.c also needed tweaking as
it decided to save off a pointer to a bus type for internal stuff, and
it was using the i2c_bus_type as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
sparse reports an error on some data that gets converted from be32.
That's because that data is typed u32 instead of __be32.
The type is correct, the be32_to_cpu() conversion is not.
Remove the conversion.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312042210.QL4DA8Av-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-By: Jochen Friedrich <jochen@scram.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Both i2c_generic_scl_recovery() and the debug output indicate that SDA is
purely optional for bus recovery. But devm_gpiod_get() never returns NULL
making it mandatory. Fix this by calling devm_gpiod_get_optional instead.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
I originally restricted i2c_register_spd() to only support systems
with up to 4 memory slots, so that we can experiment with it on
a limited numbers of systems. It's been more than 3 years and it
seems to work just fine, so the time has come to lift this arbitrary
limitation.
The maximum number of memory slots which can be connected to a single
I2C segment is 8, so support that many SPD EEPROMs. Any system with
more than 8 memory slots would have either multiple SMBus channels
or SMBus multiplexing, so it would need dedicated care. We'll get to
that later as needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Rockchip RV1126 is using old style i2c controller, the i2c2
bus uses a non-sequential offset in the grf register for the
mask/value bits for this bus.
This patch fixes i2c2 bus on rv1126 SoCs.
Signed-off-by: Tim Lunn <tim@feathertop.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add support for atomic transfers using polling mode with interrupts
intentionally disabled to get rid of the following warning introduced by
commit 63b96983a5 ("i2c: core: introduce callbacks for atomic
transfers") during system reboot and power-off:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1518 at drivers/i2c/i2c-core.h:40 i2c_transfer+0xe8/0xf4
No atomic I2C transfer handler for 'i2c-0'
...
---[ end trace 0000000000000000 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To properly handle ACK on the bus when transferring more than one
message in polling mode, move the polling handling loop from
s3c24xx_i2c_message_start() to s3c24xx_i2c_doxfer(). This way
i2c_s3c_irq_nextbyte() is always executed till the end, properly
acknowledging the IRQ bits and no recursive calls to
i2c_s3c_irq_nextbyte() are made.
While touching this, also fix finishing transfers in polling mode by
using common code path and always waiting for the bus to become idle
and disabled.
Fixes: 117053f77a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To properly handle read transfers in polling mode, no waiting for the ACK
state is needed as it will never come. Just wait a bit to ensure start
state is on the bus and continue processing next bytes.
Fixes: 117053f77a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To support FM+, we mainly need to turn the SMD constant into a parameter
and set it accordingly. That also means we can finally fix SMD to our
needs instead of bailing out. A sanity check for SMD then becomes a
sanity check for 'x == 0'. After all that, activating the enable bit for
FM+ is all we need to do. Tested with a Renesas Falcon board using R-Car
V3U.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
So far, we treated Gen4 as Gen3. But we are soon adding FM+ as a Gen4
specific feature, so prepare the code for the new devtype.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The I2C core now provides a per-adapter debugfs directory. Use it
instead of creating a custom one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The I2C core now provides a per-adapter debugfs directory. Use it
instead of creating a custom one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Jim Cromie <jim.cromie@gmail.com> # for SCX
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since commit aa49c90894 ("i2c: core: Run atomic i2c xfer when
!preemptible"), the whole reboot/power off sequence on non-preempt kernels
is using atomic i2c xfer, as !preemptible() always results to 1.
During device_shutdown(), the i2c might be used a lot and not all busses
have implemented an atomic xfer handler. This results in a lot of
avoidable noise, like:
[ 12.687169] No atomic I2C transfer handler for 'i2c-0'
[ 12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...
Fix this by allowing non-atomic xfer when the interrupts are enabled, as
it was before.
Link: https://lore.kernel.org/r/20231222230106.73f030a5@yea
Link: https://lore.kernel.org/r/20240102150350.3180741-1-mwalle@kernel.org
Link: https://lore.kernel.org/linux-i2c/13271b9b-4132-46ef-abf8-2c311967bb46@mailbox.org/
Fixes: aa49c90894 ("i2c: core: Run atomic i2c xfer when !preemptible")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Tor Vic <torvic9@mailbox.org>
[wsa: removed a comment which needs more work, code is ok]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.
"aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"
Fixes: f9eb91350b ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Possible deadlock scenario (on reboot):
rk3x_i2c_xfer_common(polling)
-> rk3x_i2c_wait_xfer_poll()
-> rk3x_i2c_irq(0, i2c);
--> spin_lock(&i2c->lock);
...
<rk3x i2c interrupt>
-> rk3x_i2c_irq(0, i2c);
--> spin_lock(&i2c->lock); (deadlock here)
Store the IRQ number and disable/enable it around the polling transfer.
This patch has been tested on NanoPC-T4.
Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add missing clk_disable_unprepare() and geni_se_resources_off() in the error
path in geni_i2c_probe().
Fixes: 14d02fbadb ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When an I2C device contains a wake IRQ subordinate to a regmap-irq chip,
the regmap-irq code must be able to perform I2C transactions during
suspend_device_irqs() and resume_device_irqs(). Therefore, the bus must
be suspended/resumed during the NOIRQ phase.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When running on a many core ARM64 server, errors were
happening in the ISR that looked like corrupted memory. These
corruptions would fix themselves if small delays were inserted
in the ISR. Errors reported by the driver included "i2c_designware
APMC0D0F:00: i2c_dw_xfer_msg: invalid target address" and
"i2c_designware APMC0D0F:00:controller timed out" during
in-band IPMI SSIF stress tests.
The problem was determined to be memory writes in the driver were not
becoming visible to all cores when execution rapidly shifted between
cores, like when a register write immediately triggers an ISR.
Processors with weak memory ordering, like ARM64, make no
guarantees about the order normal memory writes become globally
visible, unless barrier instructions are used to control ordering.
To solve this, regmap accessor functions configured by this driver
were changed to use non-relaxed forms of the low-level register
access functions, which include a barrier on platforms that require
it. This assures memory writes before a controller register access are
visible to all cores. The community concluded defaulting to correct
operation outweighed defaulting to the small performance gains from
using relaxed access functions. Being a low speed device added weight to
this choice of default register access behavior.
Signed-off-by: Jan Bottorff <janb@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This reverts commit 0b01392c18.
Conversion of PXA to generic I2C recovery, makes the I2C bus completely
lock up if recovery pinctrl is present in the DT and I2C recovery is
enabled.
So, until the generic I2C recovery can also work with PXA lets revert
to have working I2C and I2C recovery again.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: stable@vger.kernel.org # 5.11+
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
While the preamble field _is_ technically big-endian, its value is always 0x2A2A,
which is the same in either endianness. However, to avoid generating a warning,
we should still call `htons()` explicitly.
Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i2c-dev.c utilizes memdup_user() to copy a userspace array. This is done
without an overflow check.
Use the new wrapper memdup_array_user() to copy the array more safely.
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
During SMBus block data read process, we have seen high interrupt rate
because of TX_EMPTY irq status while waiting for block length byte (the
first data byte after the address phase). The interrupt handler does not
do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS.
Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives
first data byte from I2C device, then re-enable it to resume SMBus
transaction.
It takes 0.789 ms for host to receive data length from slave.
Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt.
And it is none after applying the patch.
Cc: stable@vger.kernel.org
Co-developed-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add the code to handle an invalid state when both bits S_RX_EVENT
(indicating a transaction) and S_START_BUSY (indicating the end
of transaction - transition of START_BUSY from 1 to 0) are set in
the interrupt status register during a slave read.
Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
Fixes: 1ca1b45160 ("i2c: iproc: handle Master aborted error")
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions... you
name it. The core got a memleak fix and better support for nested muxes.
-----BEGIN PGP SIGNATURE-----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=nfX/
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has largely driver updates for 6.7, i.e. feature additions (like
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions...
you name it.
The core got a memleak fix and better support for nested muxes"
* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
i2c: qcom-geni: add ACPI device id for sc8180x
Documentation: i2c: add fault code for not supporting 10 bit addresses
i2c: sun6i-p2wi: Prevent potential division by zero
i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
i2c: i801: Use new helper acpi_use_parent_companion
ACPI: Add helper acpi_use_parent_companion
MAINTAINERS: add YAML file for i2c-demux-pinctrl
i2c: core: fix lockdep warning for sparsely nested adapter chain
i2c: axxia: eliminate kernel-doc warnings
dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
i2c: stm32f7: Use devm_clk_get_enabled()
i2c: stm32f4: Use devm_clk_get_enabled()
i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
i2c: fix memleak in i2c_new_client_device()
i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
i2c: i801: Simplify class-based client device instantiation
i2c: exynos5: add support for atomic transfers
i2c: at91-core: Use devm_clk_get_enabled()
eeprom: at24: add ST M24C64-D Additional Write lockable page support
...
Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for new
hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi,
and i2c drivers for that type of device (all acked by the respective
subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems, EXCEPT for some merge conflicts that you will run
into in your tree. 2 of them are in device-tree files, which will be
trivial to resolve (accept both sides), and the last in the
drivers/gpio/gpio-ljca.c file, in the remove callback, resolution should
be pretty trivial (take the version in this branch), see here:
https://lore.kernel.org/all/20231016134159.11d8f849@canb.auug.org.au/
for details, or I can provide a resolved merge point if needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUStew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxgQCggUyfGo+JVV8XZVu5A9KwT6nr7mUAmwUgFxhZ
khK77t0KqF4hjXryeaHa
=iPd+
-----END PGP SIGNATURE-----
Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
- Allow all MFD Cell properties to be filled in dynamically at runtime
- Skip disabled device nodes and continue to look for subsequent devices
- New Device Support
- Add support for Lunar Lake-M PCI to Intel LPSS PCI
- Add support for Denverton to Intel ICH LPC
- New Functionality
- Add support for Clocks to Texas Instruments TWL* Core
- Add support for Interrupts to STMicroelectronics STM32 Timers
- Fix-ups
- Convert to new devm-* (managed) power-off API
- Remove superfluous code
- Bunch of Device Tree additions, conversions and adaptions
- Simplify obtaining resources (memory, device data) using unified API helpers
- Trivial coding-style / spelling type clean-ups
- Constify / staticify changes
- Expand or edit on existing documentation
- Convert some Regmap configurations to use the Maple Tree cache
- Apply new __counted_by() annotation to several data structures containing flexible arrays
- Replace strncpy() with strscpy()
- Bug Fixes
- Remove double put creating reference imbalances
- Ensure headphone/lineout detection sets set when booting with ACPI
-----BEGIN PGP SIGNATURE-----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=rwPH
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Allow all MFD Cell properties to be filled in dynamically at
runtime
- Skip disabled device nodes and continue to look for subsequent
devices
New Device Support:
- Add support for Lunar Lake-M PCI to Intel LPSS PCI
- Add support for Denverton to Intel ICH LPC
New Functionality:
- Add support for Clocks to Texas Instruments TWL* Core
- Add support for Interrupts to STMicroelectronics STM32 Timers
Fix-ups:
- Convert to new devm-* (managed) power-off API
- Remove superfluous code
- Bunch of Device Tree additions, conversions and adaptions
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Trivial coding-style / spelling type clean-ups
- Constify / staticify changes
- Expand or edit on existing documentation
- Convert some Regmap configurations to use the Maple Tree cache
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Replace strncpy() with strscpy()
Bug Fixes:
- Remove double put creating reference imbalances
- Ensure headphone/lineout detection gets set when booting with ACPI"
* tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
mfd: lpc_ich: Mark *_gpio_offsets data with const
spmi: rename spmi device lookup helper
spmi: document spmi_device_from_of() refcounting
dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
mfd: rk8xx: Add support for RK806 power off
mfd: rk8xx: Add support for standard system-power-controller property
dt-bindings: mfd: rk806: Allow system-power-controller property
dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller
dt-bindings: mfd: max8925: Convert to DT schema format
mfd: Use i2c_get_match_data() in a selection of drivers
mfd: Use device_get_match_data() in a bunch of drivers
mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data()
mfd: motorola-cpcap: Drop unnecessary of_match_device() call
mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs
mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL()
mfd: qcom-spmi-pmic: Fix revid implementation
mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
mfd: intel-m10-bmc: Change contact for ABI docs
mfd: max8907: Convert to use maple tree register cache
mfd: max77686: Convert to use maple tree register cache
...
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private gpio_chip
structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO code
- while there are still external users accessing struct gpio_chip, let's
make gpiochip_get_desc() public so that they at least use the preferred
helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that still
don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(), use
cleanup helpers, use dev_err_probe() where it makes sense, fully convert
to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers
-----BEGIN PGP SIGNATURE-----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=1QF8
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We don't have any new drivers. The loongson driver is getting extended
with support for new models. There's a big refactor of gpio-pca953x
and many small improvements to others.
The GPIO code in the kernel has acquired a lot of cruft over the years
as well as many abusers of the API across the kernel tree. This
release cycle we have started a major cleanup and improvement effort
that will most likely span several releases. We have started by
converting external users of struct gpio_chip to accessing the wrapper
around it - struct gpio_device. This is because the latter is
reference counted while the former is removed when the provider is
unbound. We also removed several instances of drivers accessing
private GPIOLIB structures and including the private header from
drivers/gpio/.
To that end you'll see several commits aimed at different subsystems
(acked by relevant maintainers) as well as two merges from the
x86/platform tree.
We'll then rework the locking in GPIOLIB which currently uses a big
spinlock for many different things and could use becoming more
fine-grained, especially as it doesn't even get the locking right.
We'll also use SRCU for protecting the gpio_chip pointer against
in-kernel hot-unplug crashes similar to what we saw triggered from
user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB
is still vulnerable to these use-cases. I'm just mentioning the plans
here, this is not part of this PR.
You'll see some new instances of using __free(). We've added a
gpio_device_put cleanup helper similar to the put_device one
introduced by Peter Zijlstra and used it according to the preferred
pattern except where it didn't make sense.
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private
gpio_chip structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO
code
- while there are still external users accessing struct gpio_chip,
let's make gpiochip_get_desc() public so that they at least use the
preferred helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need
them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that
still don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(),
use cleanup helpers, use dev_err_probe() where it makes sense,
fully convert to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing
properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers"
* tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits)
hte: tegra194: add GPIOLIB dependency
hte: tegra194: don't access struct gpio_chip
gpiolib: provide gpio_device_get_base()
i2c: mux: gpio: don't fiddle with GPIOLIB internals
gpiolib: provide gpiod_to_gpio_device()
gpiolib: provide gpio_device_to_device()
gpio: hisi: Fix format specifier
gpiolib: provide gpio_device_find_by_fwnode()
gpio: acpi: remove acpi_get_and_request_gpiod()
gpio: Use device_get_match_data()
gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles
platform/x86: int3472: Switch to devm_get_gpiod()
platform/x86: int3472: Stop using gpiod_toggle_active_low()
platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper
platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper
gpio: vf610: simplify code by dropping data check
gpio: vf610: add i.MX8ULP of_device_id entry
dt-bindings: gpio: vf610: add i.MX95 compatible
dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
dt-bindings: gpio: vf610: update gpio-ranges
...
- Add symbol definitions related to CDAT to the ACPICA code (Dave
Jiang).
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James Morse).
- Add __printf format attribute to acpi_os_vprintf() (Su Hui).
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh).
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt).
- Fail FPDT parsing on zero length records and add proper handling for
fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick).
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki).
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh).
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede).
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach).
- Allow _DSD buffer data only for byte accessors and document the _DSD
data buffer GUID (Andy Shevchenko).
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav).
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary).
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans
de Goede).
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede).
- Annotate struct prm_module_info with __counted_by (Kees Cook).
- Fix AER info corruption in aer_recover_queue() when error status data
has multiple sections (Shiju Jose).
- Make APEI use ERST maximum execution time for slow devices (Jeshua
Smith).
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li).
- Define common macros to use when referring to various bitfields in the
PCC generic communications channel command and status fields and use
them in some drivers (Sudeep Holla).
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose).
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET).
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav).
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav).
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki).
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki).
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski).
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt).
- Clean up coding style in pnp.h (GuoHua Cheng).
-----BEGIN PGP SIGNATURE-----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=p4Yo
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix issues, add new quirks, rearrange the IRQ override quirk
definitions, add new helpers and switch over code to using them,
rework a couple of interfaces to be more flexible, eliminate strncpy()
usage from PNP, extend the ACPI PCC mailbox driver and clean up code.
This is based on ACPI thermal driver changes that are present in the
thermal control updates for 6.7-rc1 pull request (they are depended on
by the ACPI utilities updates). However, the ACPI thermal driver
changes are not included in the list of specific ACPI changes below.
Specifics:
- Add symbol definitions related to CDAT to the ACPICA code (Dave
Jiang)
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James
Morse)
- Add __printf format attribute to acpi_os_vprintf() (Su Hui)
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh)
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt)
- Fail FPDT parsing on zero length records and add proper handling
for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick)
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki)
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh)
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede)
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach)
- Allow _DSD buffer data only for byte accessors and document the
_DSD data buffer GUID (Andy Shevchenko)
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav)
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary)
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets
(Hans de Goede)
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede)
- Annotate struct prm_module_info with __counted_by (Kees Cook)
- Fix AER info corruption in aer_recover_queue() when error status
data has multiple sections (Shiju Jose)
- Make APEI use ERST maximum execution time for slow devices (Jeshua
Smith)
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li)
- Define common macros to use when referring to various bitfields in
the PCC generic communications channel command and status fields
and use them in some drivers (Sudeep Holla)
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose)
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET)
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav)
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav)
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki)
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki)
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski)
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt)
- Clean up coding style in pnp.h (GuoHua Cheng)"
* tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
ACPI: resource: Do IRQ override on TongFang GMxXGxx
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
ACPI: acpi_pad: Rename ACPI device from device to adev
ACPI: acpi_pad: Use dev groups for sysfs
ACPI: acpi_pad: Replace acpi_driver with platform_driver
ACPI: APEI: Use ERST timeout for slow devices
ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration
PNP: replace deprecated strncpy() with memcpy()
PNP: ACPI: replace deprecated strncpy() with strscpy()
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
ACPI: scan: Use the acpi_device_is_present() helper in more places
ACPI: AC: Rename ACPI device from device to adev
...
Fix the following coccicheck warning:
drivers/i2c/busses/i2c-s3c2410.c:391:5-8: Unneeded variable: "ret".
Return "0" on line 552
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It adds ACPI device id for sc8180x platform, so that the devices can be
probed for ACPI boot.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The
variable set here is later used as a divisor.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[wsa: proper subject prefix]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
