[ Upstream commit 4e7aaa6b82 ]
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbb (netfilter: ipset: Add list flush to cancel_gc).
Fixes: 97f7cf1cd8 (netfilter: ipset: fix performance regression in swap operation)
Reported-by: Lion Ackermann <nnamrec@gmail.com>
Tested-by: Lion Ackermann <nnamrec@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4ab9da85b ]
Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace.
Fixes: a150d122b6 ("netfilter: nft_meta: add inner match support")
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c695439d19 ]
The amp_id argument of l2cap_connect() was removed in
commit 84a4bb6548 ("Bluetooth: HCI: Remove HCI_AMP support")
It was always called with amp_id == 0, i.e. AMP_ID_BREDR == 0x00 (ie.
non-AMP controller). In the above commit, the code path for amp_id != 0
was preserved, although it should have used the amp_id == 0 one.
Restore the previous behavior of the non-AMP code path, to fix problems
with L2CAP connections.
Fixes: 84a4bb6548 ("Bluetooth: HCI: Remove HCI_AMP support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 806a5198c0 ]
This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.
In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:
TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout
Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 791b4089e3 ]
Move the vxlan_features_check() call to after we verified the packet is
a tunneled VXLAN packet.
Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might
wrongly not get offloaded.
In some cases, it worked by chance as GENEVE header is the same size as
VXLAN, but it is obviously incorrect.
Fixes: e3cfc7e6b7 ("net/mlx5e: TX, Add geneve tunnel stateless offload support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6ae073f59 ]
When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70 ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d029edefed ]
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Fixes: 1e264f9d29 ("net: dsa: qca8k: add LEDs basic support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d37fe4255a ]
tcp_v6_syn_recv_sock() calls ip6_dst_store() before
inet_sk(newsk)->pinet6 has been set up.
This means ip6_dst_store() writes over the parent (listener)
np->dst_cookie.
This is racy because multiple threads could share the same
parent and their final np->dst_cookie could be wrong.
Move ip6_dst_store() call after inet_sk(newsk)->pinet6
has been changed and after the copy of parent ipv6_pinfo.
Fixes: e994b2f0fb ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce62600c4d ]
Device managed panel bridge wrappers are created by calling to
drm_panel_bridge_add_typed() and registering a release handler for
clean-up when the device gets unbound.
Since the memory for this bridge is also managed and linked to the panel
device, the release function should not try to free that memory.
Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will
fail in this case and emit a warning because the panel bridge resource
is no longer on the device resources list (it has been removed from
there before the call to release handlers).
Fixes: 67022227ff ("drm/bridge: Add a devm_ allocator for panel bridge.")
Signed-off-by: Adam Miotk <adam.miotk@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610102739.139852-1-adam.miotk@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b880018edd ]
komeda_pipeline_get_state() may return an error-valued pointer, thus
check the pointer for negative or null value before dereferencing.
Fixes: 502932a03f ("drm/komeda: Add the initial scaler support for CORE")
Signed-off-by: Amjad Ouled-Ameur <amjad.ouled-ameur@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610102056.40406-1-amjad.ouled-ameur@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0579f27249 ]
Commit 070246e467 ("net: stmmac: Fix for mismatched host/device DMA
address width") added support in the stmmac driver for platform drivers
to indicate the host DMA width, but left it up to authors of the
specific platforms to indicate if their width differed from the addr64
register read from the MAC itself.
Qualcomm's EMAC4 integration supports only up to 36 bit width (as
opposed to the addr64 register indicating 40 bit width). Let's indicate
that in the platform driver to avoid a scenario where the driver will
allocate descriptors of size that is supported by the CPU which in our
case is 36 bit, but as the addr64 register is still capable of 40 bits
the device will use two descriptors as one address.
Fixes: 8c4d92e82d ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c44711b786 ]
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value,
but then it is unconditionally passed to skb_add_rx_frag() which looks
strange and could lead to null pointer dereference.
lio_vf_rep_copy_packet() call trace looks like:
octeon_droq_process_packets
octeon_droq_fast_process_packets
octeon_droq_dispatch_pkt
octeon_create_recv_info
...search in the dispatch_list...
->disp_fn(rdisp->rinfo, ...)
lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...)
In this path there is no code which sets pg_info->page to NULL.
So this check looks unneeded and doesn't solve potential problem.
But I guess the author had reason to add a check and I have no such card
and can't do real test.
In addition, the code in the function liquidio_push_packet() in
liquidio/lio_core.c does exactly the same.
Based on this, I consider the most acceptable compromise solution to
adjust this issue by moving skb_add_rx_frag() into conditional scope.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1f233f3279 ("liquidio: switchdev support for LiquidIO NIC")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 968fde8384 ]
Currently hns3 ring buffer init process would hold cpu too long with big
Tx/Rx ring depth. This could cause soft lockup.
So this patch adds cond_resched() to the process. Then cpu can break to
run other tasks instead of busy looping.
Fixes: a723fb8efe ("net: hns3: refine for set ring parameters")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12cda92021 ]
When link status change, the nic driver need to notify the roce
driver to handle this event, but at this time, the roce driver
may uninit, then cause kernel crash.
To fix the problem, when link status change, need to check
whether the roce registered, and when uninit, need to wait link
update finish.
Fixes: 45e92b7e4e ("net: hns3: add calling roce callback function when link status change")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e96b293315 ]
If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will
not be run. As a consequence, `sfp_hwmon_remove()` is not getting
run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()`
itself checks `sfp->sm_mod_state` anyways, so this check was not
really needed in the first place.
Fixes: d2e816c029 ("net: sfp: handle module remove outside state machine")
Signed-off-by: "Csókás, Bence" <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240605084251.63502-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9185afeac2 ]
Building with W=1 incorrectly emits the following warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in vmlinux.o
This check should apply only to modules.
Fixes: 1fffe7a34c ("script: modpost: emit a warning when the description is missing")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b536948e8 ]
Once sk->sk_state is changed to TCP_LISTEN, it never changes.
unix_accept() takes the advantage and reads sk->sk_state without
holding unix_state_lock().
Let's use READ_ONCE() there.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5703fc058e ]
These pointers are frequently the same and memcmp does not compare the
pointers before comparing their contents so this was wasting cycles
comparing 16 KiB of memory which will always be equal.
Fixes: bb6780aa5a ("drm/vmwgfx: Diff cursors when using cmds")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328190716.27367-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dde1de06bd ]
STDU has its own mode_valid function now so this logic can be removed from
the generic version.
Fixes: 935f795045 ("drm/vmwgfx: Refactor drm connector probing for display modes")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-4-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb5e19d2dd ]
This limit became a hard cap starting with the change referenced below.
Surface creation on the device will fail if the requested size is larger
than this limit so altering the value arbitrarily will expose modes that
are too large for the device's hard limits.
Fixes: 7ebb47c9f9 ("drm/vmwgfx: Read new register for GB memory when available")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-3-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4268269331 ]
SVGA requires individual surfaces to fit within graphics memory
(max_mob_pages) which means that modes with a final buffer size that would
exceed graphics memory must be pruned otherwise creation will fail.
Additionally llvmpipe requires its buffer height and width to be a multiple
of its tile size which is 64. As a result we have to anticipate that
llvmpipe will round up the mode size passed to it by the compositor when
it creates buffers and filter modes where this rounding exceeds graphics
memory.
This fixes an issue where VMs with low graphics memory (< 64MiB) configured
with high resolution mode boot to a black screen because surface creation
fails.
Fixes: d947d1b71d ("drm/vmwgfx: Add and connect connector helper function")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-2-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91215f70ea ]
Clang static checker (scan-build) warning:
o_uring/io-wq.c:line 1051, column 3
The expression is an uninitialized value. The computed value will
also be garbage.
'match.nr_pending' is used in io_acct_cancel_pending_work(), but it is
not fully initialized. Change the order of assignment for 'match' to fix
this problem.
Fixes: 42abc95f05 ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20240604121242.2661244-1-suhui@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a56530492 ]
Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq
to address potential data races.
The structure io_worker->flags may be accessed through various data
paths, leading to concurrency issues. When KCSAN is enabled, it reveals
data races occurring in io_worker_handle_work and
io_wq_activate_free_worker functions.
BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker
write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28:
io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569)
io_wq_worker (io_uring/io-wq.c:?)
<snip>
read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5:
io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285)
io_wq_enqueue (io_uring/io-wq.c:947)
io_queue_iowq (io_uring/io_uring.c:524)
io_req_task_submit (io_uring/io_uring.c:1511)
io_handle_tw_list (io_uring/io_uring.c:1198)
<snip>
Line numbers against commit 18daea77cc ("Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/virt/kvm/kvm").
These races involve writes and reads to the same memory location by
different tasks running on different CPUs. To mitigate this, refactor
the code to use atomic operations such as set_bit(), test_bit(), and
clear_bit() instead of basic "and" and "or" operations. This ensures
thread-safe manipulation of worker flags.
Also, move `create_index` to avoid holes in the structure.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240507170002.2269003-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 91215f70ea ("io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89e8a2366e ]
iommu_sva_bind_device() should return either a sva bond handle or an
ERR_PTR value in error cases. Existing drivers (idxd and uacce) only
check the return value with IS_ERR(). This could potentially lead to
a kernel NULL pointer dereference issue if the function returns NULL
instead of an error pointer.
In reality, this doesn't cause any problems because iommu_sva_bind_device()
only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA.
In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will
return an error, and the device drivers won't call iommu_sva_bind_device()
at all.
Fixes: 26b25a2b98 ("iommu: Bind process address spaces to devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240528042528.71396-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4aa2dcfbad ]
Syzkaller hit a warning [1] in a call to implement() when trying
to write a value into a field of smaller size in an output report.
Since implement() already has a warn message printed out with the
help of hid_warn() and value in question gets trimmed with:
...
value &= m;
...
WARN_ON may be considered superfluous. Remove it to suppress future
syzkaller triggers.
[1]
WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 implement drivers/hid/hid-core.c:1451 [inline]
WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863
Modules linked in:
CPU: 0 PID: 5084 Comm: syz-executor424 Not tainted 6.9.0-rc7-syzkaller-00183-gcf87f46fd34d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:implement drivers/hid/hid-core.c:1451 [inline]
RIP: 0010:hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863
...
Call Trace:
<TASK>
__usbhid_submit_report drivers/hid/usbhid/hid-core.c:591 [inline]
usbhid_submit_report+0x43d/0x9e0 drivers/hid/usbhid/hid-core.c:636
hiddev_ioctl+0x138b/0x1f00 drivers/hid/usbhid/hiddev.c:726
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Fixes: 95d1c8951e ("HID: simplify implement() a bit")
Reported-by: <syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90dd7de4ef ]
The TQMx86 GPIO controller only supports falling and rising edge
triggers, but not both. Fix this by implementing a software both-edge
mode that toggles the edge type after every interrupt.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Co-developed-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/515324f0491c4d44f4ef49f170354aca002d81ef.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08af509efd ]
irq_set_type() should not implicitly unmask the IRQ.
All accesses to the interrupt configuration register are moved to a new
helper tqmx86_gpio_irq_config(). We also introduce the new rule that
accessing irq_type must happen while locked, which will become
significant for fixing EDGE_BOTH handling.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/6aa4f207f77cb58ef64ffb947e91949b0f753ccd.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d6a811b52 ]
The TQMx86 GPIO controller uses the same register address for input and
output data. Reading the register will always return current inputs
rather than the previously set outputs (regardless of the current
direction setting). Therefore, using a RMW pattern does not make sense
when setting output values. Instead, the previously set output register
value needs to be stored as a shadow register.
As there is no reliable way to get the current output values from the
hardware, also initialize all channels to 0, to ensure that stored and
actual output values match. This should usually not have any effect in
practise, as the TQMx86 UEFI sets all outputs to 0 during boot.
Also prepare for extension of the driver to more than 8 GPIOs by using
DECLARE_BITMAP.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/d0555933becd45fa92a85675d26e4d59343ddc01.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1981b296f8 ]
When reading token data from sysfs on my Inspiron 3505, the token
locations and values are wrong. This happens because match_attribute()
blindly assumes that all entries in da_tokens have an associated
entry in token_attrs.
This however is not true as soon as da_tokens[] contains zeroed
token entries. Those entries are being skipped when initialising
token_attrs, breaking the core assumption of match_attribute().
Fix this by defining an extra struct for each pair of token attributes
and use container_of() to retrieve token information.
Tested on a Dell Inspiron 3050.
Fixes: 33b9ca1e53 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240528204903.445546-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1a1fdd709 ]
Fix the parsing if extra status bits (e.g. MORE) is present.
Fixes: 7fb42780d0 ("nvme: Convert NVMe errors to PR errors")
Signed-off-by: Weiwen Hu <huweiwen@linux.alibaba.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f42bdf59b ]
Commit eb50d0f250 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99bc9f2eb3 ]
dentry->d_fsdata is set to NFS_FSDATA_BLOCKED while unlinking or
renaming-over a file to ensure that no open succeeds while the NFS
operation progressed on the server.
Setting dentry->d_fsdata to NFS_FSDATA_BLOCKED is done under ->d_lock
after checking the refcount is not elevated. Any attempt to open the
file (through that name) will go through lookp_open() which will take
->d_lock while incrementing the refcount, we can be sure that once the
new value is set, __nfs_lookup_revalidate() *will* see the new value and
will block.
We don't have any locking guarantee that when we set ->d_fsdata to NULL,
the wait_var_event() in __nfs_lookup_revalidate() will notice.
wait/wake primitives do NOT provide barriers to guarantee order. We
must use smp_load_acquire() in wait_var_event() to ensure we look at an
up-to-date value, and must use smp_store_release() before wake_up_var().
This patch adds those barrier functions and factors out
block_revalidate() and unblock_revalidate() far clarity.
There is also a hypothetical bug in that if memory allocation fails
(which never happens in practice) we might leave ->d_fsdata locked.
This patch adds the missing call to unblock_revalidate().
Reported-and-tested-by: Richard Kojedzinszky <richard+debian+bugreport@kojedz.in>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1071501
Fixes: 3c59366c20 ("NFS: don't unhash dentry during unlink/rename")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28568c906c ]
In commit 4ca9f31a2b ("NFSv4.1 test and add 4.1 trunking transport"),
we introduce the ability to query the NFS server for possible trunking
locations of the existing filesystem. However, we never checked the
returned file system path for these alternative locations. According
to the RFC, the server can say that the filesystem currently known
under "fs_root" of fs_location also resides under these server
locations under the following "rootpath" pathname. The client cannot
handle trunking a filesystem that reside under different location
under different paths other than what the main path is. This patch
enforces the check that fs_root path and rootpath path in fs_location
reply is the same.
Fixes: 4ca9f31a2b ("NFSv4.1 test and add 4.1 trunking transport")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2607133196 ]
These clkdevs were unnecessary, because systems using this driver always
look up clocks using the devicetree. And as Russell King points out[1],
since the provided device name was truncated, lookups via clkdev would
never match.
Recently, commit 8d532528ff ("clkdev: report over-sized strings when
creating clkdev entries") caused clkdev registration to fail due to the
truncation, and this now prevents the driver from probing. Fix the
driver by removing the clkdev registration.
Link: https://lore.kernel.org/linux-clk/ZkfYqj+OcAxd9O2t@shell.armlinux.org.uk/ [1]
Fixes: 30b8e27e3b ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block")
Fixes: 8d532528ff ("clkdev: report over-sized strings when creating clkdev entries")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net/
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240528001432.1200403-1-samuel.holland@sifive.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6c3c83db1 ]
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
Fixes: 297e1dcdca ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85e833cd72 ]
In ondemand mode, when the daemon is processing an open request, if the
kernel flags the cache as CACHEFILES_DEAD, the cachefiles_daemon_write()
will always return -EIO, so the daemon can't pass the copen to the kernel.
Then the kernel process that is waiting for the copen triggers a hung_task.
Since the DEAD state is irreversible, it can only be exited by closing
/dev/cachefiles. Therefore, after calling cachefiles_io_error() to mark
the cache as CACHEFILES_DEAD, if in ondemand mode, flush all requests to
avoid the above hungtask. We may still be able to read some of the cached
data before closing the fd of /dev/cachefiles.
Note that this relies on the patch that adds reference counting to the req,
otherwise it may UAF.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-12-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b4391e77a ]
After installing the anonymous fd, we can now see it in userland and close
it. However, at this point we may not have gotten the reference count of
the cache, but we will put it during colse fd, so this may cause a cache
UAF.
So grab the cache reference count before fd_install(). In addition, by
kernel convention, fd is taken over by the user land after fd_install(),
and the kernel should not call close_fd() after that, i.e., it should call
fd_install() after everything is ready, thus fd_install() is called after
copy_to_user() succeeds.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-10-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4988e35e95 ]
Now every time the daemon reads an open request, it gets a new anonymous fd
and ondemand_id. With the introduction of "restore", it is possible to read
the same open request more than once, and therefore an object can have more
than one anonymous fd.
If the anonymous fd is not unique, the following concurrencies will result
in an fd leak:
t1 | t2 | t3
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
load->fd = fd0
ondemand_id = object_id0
------ restore ------
cachefiles_ondemand_restore
// restore REQ_A
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
load->fd = fd1
ondemand_id = object_id1
process_open_req(REQ_A)
write(devfd, ("copen %u,%llu", msg->msg_id, size))
cachefiles_ondemand_copen
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
kfree(REQ_A)
process_open_req(REQ_A)
// copen fails due to no req
// daemon close(fd1)
cachefiles_ondemand_fd_release
// set object closed
-- umount --
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object
cachefiles_ondemand_init_close_req
if (!cachefiles_ondemand_object_is_open(object))
return -ENOENT;
// The fd0 is not closed until the daemon exits.
However, the anonymous fd holds the reference count of the object and the
object holds the reference count of the cookie. So even though the cookie
has been relinquished, it will not be unhashed and freed until the daemon
exits.
In fscache_hash_cookie(), when the same cookie is found in the hash list,
if the cookie is set with the FSCACHE_COOKIE_RELINQUISHED bit, then the new
cookie waits for the old cookie to be unhashed, while the old cookie is
waiting for the leaked fd to be closed, if the daemon does not exit in time
it will trigger a hung task.
To avoid this, allocate a new anonymous fd only if no anonymous fd has
been allocated (ondemand_id == 0) or if the previously allocated anonymous
fd has been closed (ondemand_id == -1). Moreover, returns an error if
ondemand_id is valid, letting the daemon know that the current userland
restore logic is abnormal and needs to be checked.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-9-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e6d704f02 ]
The err_put_fd label is only used once, so remove it to make the code
more readable. In addition, the logic for deleting error request and
CLOSE request is merged to simplify the code.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-6-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da4a827416 ]
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60
Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963
CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564
Call Trace:
kasan_report+0x93/0xc0
cachefiles_ondemand_daemon_read+0xb41/0xb60
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 116:
kmem_cache_alloc+0x140/0x3a0
cachefiles_lookup_cookie+0x140/0xcd0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 792:
kmem_cache_free+0xfe/0x390
cachefiles_put_object+0x241/0x480
fscache_cookie_state_machine+0x5c8/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object(object)
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
msg->object_id = req->object->ondemand->ondemand_id
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
copy_to_user(_buffer, msg, n)
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
------ close(fd) ------
cachefiles_ondemand_fd_release
cachefiles_put_object
cachefiles_put_object
kmem_cache_free(cachefiles_object_jar, object)
REQ_A->object->ondemand->ondemand_id
// object UAF !!!
When we see the request within xa_lock, req->object must not have been
freed yet, so grab the reference count of object before xa_unlock to
avoid the above issue.
Fixes: 0a7e54c195 ("cachefiles: resend an open request if the read request's object is closed")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-5-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de3e26f9e5 ]
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0x609/0xab0
Write of size 4 at addr ffff888109164a80 by task ondemand-04-dae/4962
CPU: 11 PID: 4962 Comm: ondemand-04-dae Not tainted 6.8.0-rc7-dirty #542
Call Trace:
kasan_report+0x94/0xc0
cachefiles_ondemand_daemon_read+0x609/0xab0
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 626:
__kmalloc+0x1df/0x4b0
cachefiles_ondemand_send_req+0x24d/0x690
cachefiles_create_tmpfile+0x249/0xb30
cachefiles_create_file+0x6f/0x140
cachefiles_look_up_object+0x29c/0xa60
cachefiles_lookup_cookie+0x37d/0xca0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 626:
kfree+0xf1/0x2c0
cachefiles_ondemand_send_req+0x568/0x690
cachefiles_create_tmpfile+0x249/0xb30
cachefiles_create_file+0x6f/0x140
cachefiles_look_up_object+0x29c/0xa60
cachefiles_lookup_cookie+0x37d/0xca0
fscache_cookie_state_machine+0x43c/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
copy_to_user(_buffer, msg, n)
process_open_req(REQ_A)
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW);
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
write(devfd, ("copen %u,%llu", msg->msg_id, size));
cachefiles_ondemand_copen
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
kfree(REQ_A)
cachefiles_ondemand_get_fd(REQ_A)
fd = get_unused_fd_flags
file = anon_inode_getfile
fd_install(fd, file)
load = (void *)REQ_A->msg.data;
load->fd = fd;
// load UAF !!!
This issue is caused by issuing a restore command when the daemon is still
alive, which results in a request being processed multiple times thus
triggering a UAF. So to avoid this problem, add an additional reference
count to cachefiles_req, which is held while waiting and reading, and then
released when the waiting and reading is over.
Note that since there is only one reference count for waiting, we need to
avoid the same request being completed multiple times, so we can only
complete the request if it is successfully removed from the xarray.
Fixes: e73fa11a35 ("cachefiles: add restore command to recover inflight ondemand read requests")
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-4-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e73fa11a35 ]
Previously, in ondemand read scenario, if the anonymous fd was closed by
user daemon, inflight and subsequent read requests would return EIO.
As long as the device connection is not released, user daemon can hold
and restore inflight requests by setting the request flag to
CACHEFILES_REQ_NEW.
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-6-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 4b4391e77a ("cachefiles: defer exposing anon_fd until after copy_to_user() succeeds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a79004083 ]
The following concurrency may cause a read request to fail to be completed
and result in a hung:
t1 | t2
---------------------------------------------------------
cachefiles_ondemand_copen
req = xa_erase(&cache->reqs, id)
// Anon fd is maliciously closed.
cachefiles_ondemand_fd_release
xa_lock(&cache->reqs)
cachefiles_ondemand_set_object_close(object)
xa_unlock(&cache->reqs)
cachefiles_ondemand_set_object_open
// No one will ever close it again.
cachefiles_ondemand_daemon_read
cachefiles_ondemand_select_req
// Get a read req but its fd is already closed.
// The daemon can't issue a cread ioctl with an closed fd, then hung.
So add spin_lock for cachefiles_ondemand_info to protect ondemand_id and
state, thus we can avoid the above problem in cachefiles_ondemand_copen()
by using ondemand_id to determine if fd has been closed.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-8-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a7e54c195 ]
When an anonymous fd is closed by user daemon, if there is a new read
request for this file comes up, the anonymous fd should be re-opened
to handle that read request rather than fail it directly.
1. Introduce reopening state for objects that are closed but have
inflight/subsequent read requests.
2. No longer flush READ requests but only CLOSE requests when anonymous
fd is closed.
3. Enqueue the reopen work to workqueue, thus user daemon could get rid
of daemon_read context and handle that request smoothly. Otherwise,
the user daemon will send a reopen request and wait for itself to
process the request.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20231120041422.75170-4-zhujia.zj@bytedance.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 0a79004083 ("cachefiles: add spin_lock for cachefiles_ondemand_info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
