commit f814bdda77 upstream.
The detection of dirty-throttled tasks in blk-wbt has been subtly broken
since its beginning in 2016. Namely if we are doing cgroup writeback and
the throttled task is not in the root cgroup, balance_dirty_pages() will
set dirty_sleep for the non-root bdi_writeback structure. However
blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback
structure. Thus detection of recently throttled tasks is not working in
this case (we noticed this when we switched to cgroup v2 and suddently
writeback was slow).
Since blk-wbt has no easy way to get to proper bdi_writeback and
furthermore its intention has always been to work on the whole device
rather than on individual cgroups, just move the dirty_sleep timestamp
from bdi_writeback to backing_dev_info. That fixes the checking for
recently throttled task and saves memory for everybody as a bonus.
CC: stable@vger.kernel.org
Fixes: b57d74aff9 ("writeback: track if we're sleeping on progress in balance_dirty_pages()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz
[axboe: fixup indentation errors]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9319b64790 upstream.
(struct dirty_throttle_control *)->thresh is an unsigned long, but is
passed as the u32 divisor argument to div_u64(). On architectures where
unsigned long is 64 bytes, the argument will be implicitly truncated.
Use div64_u64() instead of div_u64() so that the value used in the "is
this a safe division" check is the same as the divisor.
Also, remove redundant cast of the numerator to u64, as that should happen
implicitly.
This would be difficult to exploit in memcg domain, given the ratio-based
arithmetic domain_drity_limits() uses, but is much easier in global
writeback domain with a BDI_CAP_STRICTLIMIT-backing device, using e.g.
vm.dirty_bytes=(1<<32)*PAGE_SIZE so that dtc->thresh == (1<<32)
Link: https://lkml.kernel.org/r/20240118181954.1415197-1-zokeefe@google.com
Fixes: f6789593d5 ("mm/page-writeback.c: fix divide by zero in bdi_dirty_limits()")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Cc: Maxim Patlasov <MPatlasov@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since now bdi->max_ratio is part per million, fix the wrong arithmetic for
max_prop_frac when setting max_ratio. Otherwise the miscalculated
max_prop_frac will affect the incrementing of writeout completion count
when max_ratio is not 100%.
Link: https://lkml.kernel.org/r/20231219142508.86265-3-jefflexu@linux.alibaba.com
Fixes: efc3e6ad53 ("mm: split off __bdi_set_max_ratio() function")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since now bdi->min_ratio is part per million, fix the wrong arithmetic.
Otherwise it will fail with -EINVAL when setting a reasonable min_ratio,
as it tries to set min_ratio to (min_ratio * BDI_RATIO_SCALE) in
percentage unit, which exceeds 100% anyway.
# cat /sys/class/bdi/253\:0/min_ratio
0
# cat /sys/class/bdi/253\:0/max_ratio
100
# echo 1 > /sys/class/bdi/253\:0/min_ratio
-bash: echo: write error: Invalid argument
Link: https://lkml.kernel.org/r/20231219142508.86265-2-jefflexu@linux.alibaba.com
Fixes: 8021fb3232 ("mm: split off __bdi_set_min_ratio() function")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio_wait_stable waits for writeback to finish before modifying the
contents of a folio again, e.g. to support check summing of the data
in the block integrity code.
Currently this behavior is controlled by the SB_I_STABLE_WRITES flag
on the super_block, which means it is uniform for the entire file system.
This is wrong for the block device pseudofs which is shared by all
block devices, or file systems that can use multiple devices like XFS
witht the RT subvolume or btrfs (although btrfs currently reimplements
folio_wait_stable anyway).
Add a per-address_space AS_STABLE_WRITES flag to control the behavior
in a more fine grained way. The existing SB_I_STABLE_WRITES is kept
to initialize AS_STABLE_WRITES to the existing default which covers
most cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-2-hch@lst.de
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Match how folio_unlock() works by combining the test for PG_waiters with
the clearing of PG_writeback. This should have a small performance win,
and removes the last user of folio_wake().
Link: https://lkml.kernel.org/r/20231004165317.1061855-18-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than check the result of test-and-clear, just check that we have
the writeback bit set at the start. This wouldn't catch every case, but
it's good enough (and enables the next patch).
Link: https://lkml.kernel.org/r/20231004165317.1061855-17-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change to use new address space operation dirty_folio().
Link: https://lkml.kernel.org/r/20230917-trycontrib1-v1-1-db22630b8839@gmail.com
Fixes: 6f31a5a261 ("fs: Add aops->dirty_folio")
Signed-off-by: Jianguo Bau <roidinev@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fold folio_account_redirty into folio_redirty_for_writepage now
that all other users except for the also unused account_page_redirty
wrapper are gone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
nr_to_write is a count of pages, so we need to decrease it by the number
of pages in the folio we just wrote, not by 1. Most callers specify
either LONG_MAX or 1, so are unaffected, but writeback_sb_inodes() might
end up writing 512x as many pages as it asked for.
Dave added:
: XFS is the only filesystem this would affect, right? AFAIA, nothing
: else enables large folios and uses writeback through
: write_cache_pages() at this point...
:
: In which case, I'd be surprised if much difference, if any, gets
: noticed by anyone.
Link: https://lkml.kernel.org/r/20230628185548.981888-1-willy@infradead.org
Fixes: 793917d997 ("mm/readahead: Add large folio readahead")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit c7c3dec1c9 ("mm: rmap: remove lock_page_memcg()"),
no more user, kill lock_page_memcg() and unlock_page_memcg().
Link: https://lkml.kernel.org/r/20230614143612.62575-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The last remaining user of folio_write_one through the write_one_page
wrapper is jfs, so move the functionality there and hard code the
call to metapage_writepage.
Note that the use of the pagecache by the JFS 'metapage' buffer cache
is a bit odd, and we could probably do without VM-level dirty tracking
at all, but that's a change for another time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Patch series "Convert writepage_t to use a folio".
More folioisation. I split out the mpage work from everything else
because it completely dominated the patch, but some implementations I just
converted outright.
This patch (of 2):
We always write back an entire folio, but that's currently passed as the
head page. Convert all filesystems that use write_cache_pages() to expect
a folio instead of a page.
Link: https://lkml.kernel.org/r/20230126201255.1681189-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230126201255.1681189-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert function to use folios throughout. This is in preparation for the
removal of find_get_pages_range_tag(). This change removes 8 calls to
compound_head(), and the function now supports large folios.
Link: https://lkml.kernel.org/r/20230104211448.4804-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcow (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zap_page_range was originally designed to unmap pages within an address
range that could span multiple vmas. While working on [1], it was
discovered that all callers of zap_page_range pass a range entirely within
a single vma. In addition, the mmu notification call within zap_page
range does not correctly handle ranges that span multiple vmas. When
crossing a vma boundary, a new mmu_notifier_range_init/end call pair with
the new vma should be made.
Instead of fixing zap_page_range, do the following:
- Create a new routine zap_vma_pages() that will remove all pages within
the passed vma. Most users of zap_page_range pass the entire vma and
can use this new routine.
- For callers of zap_page_range not passing the entire vma, instead call
zap_page_range_single().
- Remove zap_page_range.
[1] https://lore.kernel.org/linux-mm/20221114235507.294320-2-mike.kravetz@oracle.com/
Link: https://lkml.kernel.org/r/20230104002732.232573-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com> [s390]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that all external callers are gone, just fold it into do_writepages.
Link: https://lkml.kernel.org/r/20221229161031.391878-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Deactivate_page() has already been converted to use folios, this change
converts it to take in a folio argument instead of calling page_folio().
It also renames the function folio_deactivate() to be more consistent with
other folio functions.
[akpm@linux-foundation.org: fix left-over comments, per Yu Zhao]
Link: https://lkml.kernel.org/r/20221221180848.20774-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This introduces bdi_set_min_ratio_no_scale(). It uses the max
granularity for the ratio. This function by the new sysfs knob
min_ratio_fine.
Link: https://lkml.kernel.org/r/20221119005215.3052436-19-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This introduces bdi_set_max_ratio_no_scale(). It uses the max
granularity for the ratio. This function by the new sysfs knob
max_ratio_fine.
Link: https://lkml.kernel.org/r/20221119005215.3052436-16-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This introduces the bdi_set_min_bytes() function. The min_bytes function
does not store the min_bytes value. Instead it converts the min_bytes
value into the corresponding ratio value.
Link: https://lkml.kernel.org/r/20221119005215.3052436-13-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This splits off the __bdi_set_min_ratio() function from the
bdi_set_min_ratio() function. The __bdi_set_min_ratio() function will
also be called from the bdi_set_min_bytes() function, which will be
introduced in the next patch.
Link: https://lkml.kernel.org/r/20221119005215.3052436-12-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds a function to return the specified value for min_bytes. It
converts the stored min_ratio of the bdi to the corresponding bytes
value. This is an approximation as it is based on the value that is
returned by global_dirty_limits(), which can change. The returned
value can be different than the value when the min_bytes value was set.
Link: https://lkml.kernel.org/r/20221119005215.3052436-11-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This introduces the bdi_set_max_bytes() function. The max_bytes function
does not store the max_bytes value. Instead it converts the max_bytes
value into the corresponding ratio value.
Link: https://lkml.kernel.org/r/20221119005215.3052436-8-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This splits off __bdi_set_max_ratio() from bdi_set_max_ratio().
__bdi_set_max_ratio() will also be called from bdi_set_max_bytes(),
which will be introduced in the next patch.
Link: https://lkml.kernel.org/r/20221119005215.3052436-7-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds a function to return the specified value for max_bytes. It
converts the stored max_ratio of the bdi to the corresponding bytes
value. It introduces the bdi_get_bytes helper function to do the
conversion. This is an approximation as it is based on the value that is
returned by global_dirty_limits(), which can change. The helper function
will also be used by the min_bytes bdi knob.
Link: https://lkml.kernel.org/r/20221119005215.3052436-6-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To get finer granularity for ratio calculations use part per million
instead of percentiles. This is especially important if we want to
automatically convert byte values to ratios. Otherwise the values that
are actually used can be quite different. This is also important for
machines with more main memory (1% of 256GB is already 2.5GB).
Link: https://lkml.kernel.org/r/20221119005215.3052436-5-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/block: add bdi sysfs knobs", v4.
At meta network block devices (nbd) are used to implement remote block
storage. In testing and during production it has been observed that these
network block devices can consume a huge portion of the dirty writeback
cache and writeback can take a considerable time.
To be able to give stricter limits, I'm proposing the following changes:
1) introduce strictlimit knob
Currently the max_ratio knob exists to limit the dirty_memory. However
this knob only applies once (dirty_ratio + dirty_background_ratio) / 2
has been reached.
With the BDI_CAP_STRICTLIMIT flag, the max_ratio can be applied without
reaching that limit. This change exposes that knob.
This knob can also be useful for NFS, fuse filesystems and USB devices.
2) Use part of 1000000 internal calculation
The max_ratio is based on percentage. With the current machine sizes
percentage values can be very high (1% of a 256GB main memory is already
2.5GB). This change uses part of 1000000 instead of percentages for the
internal calculations.
3) Introduce two new sysfs knobs: min_bytes and max_bytes.
Currently all calculations are based on ratio, but for a user it often
more convenient to specify a limit in bytes. The new knobs will not
store bytes values, instead they will translate the byte value to a
corresponding ratio. As the internal values are now part of 1000, the
ratio is closer to the specified value. However the value should be more
seen as an approximation as it can fluctuate over time.
3) Introduce two new sysfs knobs: min_ratio_fine and max_ratio_fine.
The granularity for the existing sysfs bdi knobs min_ratio and max_ratio
is based on percentage values. The new sysfs bdi knobs min_ratio_fine
and max_ratio_fine allow to specify the ratio as part of 1 million.
This patch (of 20):
This adds the bdi_set_strict_limit function to be able to set/unset the
BDI_CAP_STRICTLIMIT flag.
Link: https://lkml.kernel.org/r/20221119005215.3052436-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20221119005215.3052436-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chris Mason <clm@meta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Export the function balance_dirty_pages_ratelimited_flags(). It is now
also called from btrfs.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a disk is removed, bdi_unregister gets called to stop further
writeback and wait for associated delayed work to complete. However,
wb_inode_writeback_end() may schedule bandwidth estimation dwork after
this has completed, which can result in the timer attempting to access the
just freed bdi_writeback.
Fix this by checking if the bdi_writeback is alive, similar to when
scheduling writeback work.
Since this requires wb->work_lock, and wb_inode_writeback_end() may get
called from interrupt, switch wb->work_lock to an irqsafe lock.
Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com
Fixes: 45a2966fd6 ("writeback: fix bandwidth estimate for spiky workload")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds the helper function balance_dirty_pages_ratelimited_flags().
It adds the parameter flags to balance_dirty_pages_ratelimited().
The flags parameter is passed to balance_dirty_pages(). For async
buffered writes the flag value will be BDP_ASYNC.
If balance_dirty_pages() gets called for async buffered write, we don't
want to wait. Instead we need to indicate to the caller that throttling
is needed so that it can stop writing and offload the rest of the write
to a context that can block.
The new helper function is also used by balance_dirty_pages_ratelimited().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623175157.1715274-4-shr@fb.com
[axboe: fix kerneltest bot 'ret' issue]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Transition of wb->dirty_exceeded from 0 to 1 happens before we go to
sleep in balance_dirty_pages() while transition from 1 to 0 happens when
exiting from balance_dirty_pages(), possibly based on old values. This
does not make a lot of sense since wb->dirty_exceeded should simply
reflect whether wb is over dirty limit and so we should ratelimit
entering to balance_dirty_pages() less. Move the two updates together.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220623175157.1715274-3-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We start background writeback if we are over background threshold after
exiting the main loop in balance_dirty_pages(). This may result in
basing the decision on already stale values (we may have slept for
significant amount of time) and it is also inconvenient for refactoring
needed for async dirty throttling. Move the check into the main waiting
loop.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220623175157.1715274-2-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and
all this caused merge conflicts with one susbystem or another.
This tree was put together to help try to avoid conflicts with these cleanups
going on different trees at time. So nothing exciting on this pull request,
just cleanups.
I actually had this sysctl-next tree up since v5.18 but I missed sending a
pull request for it on time during the last merge window. And so these changes
have been being soaking up on sysctl-next and so linux-next for a while.
The last change was merged May 4th.
Most of the compile issues were reported by 0day and fixed.
To help avoid a conflict with bpf folks at Daniel Borkmann's request
I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which
moves the BPF sysctls from kernel/sysctl.c to BPF core.
Possible merge conflicts and known resolutions as per linux-next:
bfp:
https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au
rcu:
https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au
powerpc:
https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----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=btwh
-----END PGP SIGNATURE-----
Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
The previous comment was not terribly helpful. Be a bit more explicit
about the necessary locking environment.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
In function bdi_set_min_ratio, min_ratio is unsigned int, it will
result underflow when setting min_ratio below bdi->min_ratio, it
is confusing. Rework it, no functional change.
Link: https://lkml.kernel.org/r/20220422095159.2858305-1-chenwandun@huawei.com
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_SYSCTL=n the variable dirty_bytes_min which is just used
as a minimum to a proc handler is not used. So just move this under
the ifdef for CONFIG_SYSCTL.
Fixes: aa779e5102 ("mm: move page-writeback sysctls to their own file")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we just
care about the core logic.
So move the page-writeback sysctls to its own file.
[akpm@linux-foundation.org: coding-style cleanups]
akpm@linux-foundation.org: fix CONFIG_SYSCTL=n warnings]
Link: https://lkml.kernel.org/r/20220129012955.26594-1-zhanglianjie@uniontech.com
Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
filemap_unaccount_folio() has a WARN_ON_ONCE(folio_test_dirty(folio)). It
is good to warn of late dirtying on a persistent filesystem, but late
dirtying on tmpfs can only lose data which is expected to be thrown away;
and it's a pity if that warning comes ONCE on tmpfs, then hides others
which really matter. Make it conditional on mapping_cap_writeback().
Cleanup: then folio_account_cleaned() no longer needs to check that for
itself, and so no longer needs to know the mapping.
Link: https://lkml.kernel.org/r/b5a1106c-7226-a5c6-ad41-ad4832cae1f@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
Since commit a804552b9a ("mm/page-writeback.c: fix
dirty_balance_reserve subtraction from dirtyable memory"), local
variable x can not be negative. And it can not overflow when it is the
total number of dirtyable highmem pages. Thus remove the unneeded
comment and overflow check.
Link: https://lkml.kernel.org/r/20220224115416.46089-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With all implementations converted to ->dirty_folio, we can stop calling
this fallback method and remove it entirely.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a mechanical change.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Convert all callers; mostly this is just changing the aops to point
at it, but a few implementations need a little more work.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This replaces ->set_page_dirty(). It returns a bool instead of an int
and takes the address_space as a parameter instead of expecting the
implementations to retrieve the address_space from the page. This is
particularly important for filesystems which use FS_OPS for swap.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Add some notes about how this function needs to be called.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
Neil Brown raised concerns about callers of reclaim_throttle specifying
a timeout value. The original timeout values to congestion_wait() were
probably pulled out of thin air or copy&pasted from somewhere else.
This patch centralises the timeout values and selects a timeout based on
the reason for reclaim throttling. These figures are also pulled out of
the same thin air but better values may be derived
Running a workload that is throttling for inappropriate periods and
tracing mm_vmscan_throttled can be used to pick a more appropriate
value. Excessive throttling would pick a lower timeout where as
excessive CPU usage in reclaim context would select a larger timeout.
Ideally a large value would always be used and the wakeups would occur
before a timeout but that requires careful testing.
Link: https://lkml.kernel.org/r/20211022144651.19914-7-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Darrick J . Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
