tpm_transmit() does not offer an explicit interface to indicate the number
of valid bytes in the communication buffer. Instead, it relies on the
commandSize field in the TPM header that is encoded within the buffer.
Therefore, ensure that a) enough data has been written to the buffer, so
that the commandSize field is present and b) the commandSize field does not
announce more data than has been written to the buffer.
This should have been fixed with CVE-2011-1161 long ago, but apparently
a correct version of that patch never made it into the kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The TPM can choose one of two ways to react to the TPM2_SelfTest command.
It can either run all self tests synchronously and then return RC_SUCCESS
once all tests were successful. Or it can choose to run the tests
asynchronously and return RC_TESTING immediately while the self tests still
execute in the background.
The previous implementation apparently was not aware of those possibilities
and attributed RC_TESTING to some prototype chips instead. With this change
the return code of TPM2_SelfTest is interpreted correctly, i.e. the self
test result is polled if and only if RC_TESTING is received.
Unfortunately, the polling cannot be done in the most straightforward way.
If RC_TESTING is received, ideally the code should now poll the
selfTestDone bit in the STS register, as this avoids sending more commands,
that might interrupt self tests executing in the background and thus
prevent them from ever completing. But it cannot be guaranteed that this
bit is correctly implemented for all devices, so the next best thing would
be to use TPM2_GetTestResult to query the test result. But the response to
that command can be very long, and the code currently lacks the
capabilities for efficient unmarshalling, so it is difficult to execute
this command.
Therefore, we simply run the TPM2_SelfTest command in a loop, which should
complete eventually, since we only request the execution of self tests that
have not yet been done.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In order to avoid delaying the code longer than necessary while still
giving the TPM enough time to execute the self tests asynchronously, start
with a small delay between two polls and increase it each round.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm2_do_selftest is only used during initialization of the TPM to ensure
that the device functions correctly. Therefore, it is sufficient to request
only missing self tests (parameter full_test=0), not a reexecution of all
self tests, as was done before. This allows for a faster execution of this
command.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The buffers used as tx_buf/rx_buf in a SPI transfer need to be DMA-safe.
This cannot be guaranteed for the buffers passed to tpm_tis_spi_read_bytes
and tpm_tis_spi_write_bytes. Therefore, we need to use our own DMA-safe
buffer and copy the data to/from it.
The buffer needs to be allocated separately, to ensure that it is
cacheline-aligned and not shared with other data, so that DMA can work
correctly.
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch gets rid of dealing with intermediate flag for start method
and use start method value from ACPI table directly.
For ARM64, the locality is handled by Trust Zone in FW. The layout
does not have crb_regs_head. It is hitting the following line.
dev_warn(dev, FW_BUG "Bad ACPI memory layout");
Current code excludes CRB_FL_ACPI_START for this check. Now since
ARM64 support for TPM CRB is added, CRB_FL_CRB_SMC_START should also be
excluded from this check.
For goIdle and cmdReady where code was excluding CRB_FL_ACPI_START only
(do nothing for ACPI start method), CRB_FL_CRB_SMC_START was also
excluded as ARM64 SMC start method does not have TPM_CRB_CTRL_REQ.
However with special PPT workaround requiring CRB_FL_CRB_START to be
set in addition to CRB_FL_ACPI_START and the addition flag of SMC
start method CRB_FL_CRB_SMC_START, the code has become difficult to
maintain and undrestand. It is better to make code deal with start
method value from ACPI table directly.
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Making cmd_getticks 'const' introduced a couple of harmless warnings:
drivers/char/tpm/tpm_tis_core.c: In function 'probe_itpm':
drivers/char/tpm/tpm_tis_core.c:469:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:477:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:255:12: note: expected 'u8 * {aka unsigned char *}' but argument is of type 'const u8 * {aka const unsigned char *}'
static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
This changes the related functions to all take 'const' pointers
so that gcc can see this as being correct. I had to slightly
modify the logic around tpm_tis_spi_transfer() for this to work
without introducing ugly casts.
Cc: stable@vger.kernel.org
Fixes: 5e35bd8e06b9 ("tpm_tis: make array cmd_getticks static const to shink object code size")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Don't populate array cmd_getticks on the stack, instead make it static
const. Makes the object code smaller by over 160 bytes:
Before:
text data bss dec hex filename
18813 3152 128 22093 564d drivers/char/tpm/tpm_tis_core.o
After:
text data bss dec hex filename
18554 3248 128 21930 55aa drivers/char/tpm/tpm_tis_core.o
Cc: stable@vger.kernel.org
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Migrated pubek_show to struct tpm_buf and cleaned up its implementation.
Previously the output parameter structure was declared but left
completely unused. Now it is used to refer different fields of the
output. We can move it to tpm-sysfs.c as it does not have any use
outside of that file.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Pull TPM updates from James Morris:
"Here are the TPM updates from Jarkko for v4.14, which I've placed in
their own branch (next-tpm). I ended up cherry-picking them as other
changes had been made in Jarkko's branch after he sent me his original
pull request.
I plan on maintaining a separate branch for TPM (and other security
subsystems) from now on.
From Jarkko: 'Not much this time except a few fixes'"
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: ibmvtpm: simplify crq initialization and document crq format
tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers
Documentation: tpm: add powered-while-suspended binding documentation
tpm: tpm_crb: constify acpi_device_id.
tpm: vtpm: constify vio_device_id
The crq is passed in registers and is the same on BE and LE hosts.
However, current implementation allocates a structure on-stack to
represent the crq, initializes the members swapping them to BE, and
loads the structure swapping it from BE. This is pointless and causes
GCC warnings about ununitialized members. Get rid of the structure and
the warnings.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The patch simply replaces all msleep function calls with usleep_range calls
in the generic drivers.
Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a
thousand PCR extends, we see results going from 1m57s unpatched to 40s
with the new patch. We obtain similar results when using the original and
patched tpm_infineon driver, which is also part of the patch.
Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per
extend unpatched and around 7ms with the new patch.
Note that the PCR consistency is untouched with this patch, each TPM has
been tested with 10 million extends and the aggregated PCR value is
continuously verified to be correct.
As an extension of this work, this could potentially and easily be applied
to other vendor's drivers. Still, these changes are not included in the
proposed patch as they are untested.
Signed-off-by: Hamza Attak <hamza@hpe.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4198 608 0 4806 12c6 drivers/char/tpm/tpm_crb.o
File size After adding 'const':
text data bss dec hex filename
4262 520 0 4782 12ae drivers/char/tpm/tpm_crb.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
As seen from the implementation of the single class shutdown hook this
is not very sound design.
Rename the class shutdown hook to shutdown_pre to make it clear it runs
before the driver shutdown hook.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The suspend/resume behavior of the TPM can be controlled by setting
"powered-while-suspended" in the DTS. This is useful for the cases
when hardware does not power-off the TPM.
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
tpm2_do_selftest() performs a PCR read during the TPM initialization phase.
This patch replaces the PCR read code with a call to tpm2_pcr_read().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
tpm2_pcr_read() now builds the PCR read command buffer with tpm_buf
functions. This solution is preferred to using a tpm2_cmd structure,
as tpm_buf functions provide protection against buffer overflow.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The pointer ilb_base_addr does not need to be in global scope, so make
it static.
Cleans up sparse warning:
"symbol 'ilb_base_addr' was not declared. Should it be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Consolidated all the "manual" TPM startup code to a single function
in order to make code flows a bit cleaner and migrate to tpm_buf.
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
To overcome a hardware limitation on Intel Braswell systems,
disable CLKRUN protocol during TPM transactions and re-enable
once the transaction is completed.
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
priv->cmd_size is never initialised if the cmd and rsp buffers reside
at different addresses. Initialise it in the exit path of the function
when rsp buffer has also been successfully allocated.
Fixes: aa77ea0e43 ("tpm/tpm_crb: cache cmd_size register value.").
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
While cleaning up sysfs callback that prints EK we discovered a kernel
memory leak. This commit fixes the issue by zeroing the buffer used for
TPM command/response.
The leak happen when we use either tpm_vtpm_proxy, tpm_ibmvtpm or
xen-tpmfront.
Cc: stable@vger.kernel.org
Fixes: 0883743825 ("TPM: sysfs functions consolidation")
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
If a TPM2 loses power without a TPM2_Shutdown command being issued (a
"disorderly reboot"), it may lose some state that has yet to be
persisted to NVRam, and will increment the DA counter. After the DA
counter gets sufficiently large, the TPM will lock the user out.
NOTE: This only changes behavior on TPM2 devices. Since TPM1 uses sysfs,
and sysfs relies on implicit locking on chip->ops, it is not safe to
allow this code to run in TPM1, or to add sysfs support to TPM2, until
that locking is made explicit.
Signed-off-by: Josh Zimmerman <joshz@google.com>
Cc: stable@vger.kernel.org
Fixes: 74d6b3ceaa ("tpm: fix suspend/resume paths for TPM 2.0")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull security layer updates from James Morris:
- a major update for AppArmor. From JJ:
* several bug fixes and cleanups
* the patch to add symlink support to securityfs that was floated
on the list earlier and the apparmorfs changes that make use of
securityfs symlinks
* it introduces the domain labeling base code that Ubuntu has been
carrying for several years, with several cleanups applied. And it
converts the current mediation over to using the domain labeling
base, which brings domain stacking support with it. This finally
will bring the base upstream code in line with Ubuntu and provide
a base to upstream the new feature work that Ubuntu carries.
* This does _not_ contain any of the newer apparmor mediation
features/controls (mount, signals, network, keys, ...) that
Ubuntu is currently carrying, all of which will be RFC'd on top
of this.
- Notable also is the Infiniband work in SELinux, and the new file:map
permission. From Paul:
"While we're down to 21 patches for v4.13 (it was 31 for v4.12),
the diffstat jumps up tremendously with over 2k of line changes.
Almost all of these changes are the SELinux/IB work done by
Daniel Jurgens; some other noteworthy changes include a NFS v4.2
labeling fix, a new file:map permission, and reporting of policy
capabilities on policy load"
There's also now genfscon labeling support for tracefs, which was
lost in v4.1 with the separation from debugfs.
- Smack incorporates a safer socket check in file_receive, and adds a
cap_capable call in privilege check.
- TPM as usual has a bunch of fixes and enhancements.
- Multiple calls to security_add_hooks() can now be made for the same
LSM, to allow LSMs to have hook declarations across multiple files.
- IMA now supports different "ima_appraise=" modes (eg. log, fix) from
the boot command line.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits)
apparmor: put back designators in struct initialisers
seccomp: Switch from atomic_t to recount_t
seccomp: Adjust selftests to avoid double-join
seccomp: Clean up core dump logic
IMA: update IMA policy documentation to include pcr= option
ima: Log the same audit cause whenever a file has no signature
ima: Simplify policy_func_show.
integrity: Small code improvements
ima: fix get_binary_runtime_size()
ima: use ima_parse_buf() to parse template data
ima: use ima_parse_buf() to parse measurements headers
ima: introduce ima_parse_buf()
ima: Add cgroups2 to the defaults list
ima: use memdup_user_nul
ima: fix up #endif comments
IMA: Correct Kconfig dependencies for hash selection
ima: define is_ima_appraise_enabled()
ima: define Kconfig IMA_APPRAISE_BOOTPARAM option
ima: define a set of appraisal rules requiring file signatures
ima: extend the "ima_policy" boot command line to support multiple policies
...
- Update the ACPICA code in the kernel to upstream revision
revision 20170531 (which covers all of the new material from
ACPI 6.2) including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value
for HEST, header support for TPM2 table changes, and BGRT
Status field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ImFw
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These mostly update the ACPICA code in the kernel to upstream revision
20170531 which covers all of the new material from ACPI 6.2, including
new tables (WSMT, HMAT, PPTT), new subtables and definition changes
for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource
descriptor macros for pin control, support for new predefined methods
(_LSI, _LSR, _LSW, _HMA), fixes and cleanups.
On top of that, an additional ACPICA change from Kees (which also is
upstream already) switches all of the definitions of function pointer
structures in ACPICA to use designated initializers so as to make the
structure layout randomization GCC plugin work with it.
The rest is a few fixes and cleanups in the EC driver, an xpower PMIC
driver update, a new backlight blacklist entry, and update of the
tables configfs interface and a messages formatting cleanup.
Specifics:
- Update the ACPICA code in the kernel to upstream revision revision
20170531 (which covers all of the new material from ACPI 6.2)
including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value for
HEST, header support for TPM2 table changes, and BGRT Status
field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll)"
* tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
ACPI / EC: Add quirk for GL720VMK
ACPI / EC: Fix media keys not working problem on some Asus laptops
ACPI / EC: Add support to skip boot stage DSDT probe
ACPI / EC: Enhance boot EC sanity check
ACPI / video: Add quirks for the Dell Precision 7510
ACPI: EC: Fix EC command visibility for dynamic debug
ACPI: EC: Fix an EC event IRQ storming issue
ACPICA: Use designated initializers
ACPICA: Update version to 20170531
ACPICA: Update a couple of debug output messages
ACPICA: acpiexec: enhance local signal handler
ACPICA: Simplify output for the ACPI Debug Object
ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
ACPICA: Improvements for debug output only
ACPICA: Disassembler: allow conflicting external declarations to be emitted.
ACPICA: Disassembler: add external op to namespace on first pass
ACPICA: Disassembler: prevent external op's from opening a new scope
ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
ACPICA: Changing External to a named object
ACPICA: Update two error messages to emit control method name
...
Remove unnecessary NULL check.
Pointer _chip_ cannot be NULL in this instance.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> (compilation)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify
error path and fix potentially wrong assignment if ->probe() fails.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> (compilation)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
To prevent userspace from sending the TPM driver command to set
the locality, we need to check every command that is sent from
user space. To distinguish user space commands from internally
sent commands we introduce an additional state flag
STATE_DRIVER_COMMAND that is set while the driver sends this
command. Similar to the TPM 2 space commands we return an error
code when this command is detected.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Implement the request_locality function. To set the locality on the
backend we define vendor-specific TPM 1.2 and TPM 2 ordinals and send
a command to the backend to set the locality for the next commands.
To avoid recursing into requesting the locality, we set the
TPM_TRANSMIT_RAW flag when calling tpm_transmit_cmd. To avoid recursing
into TPM 2 space related commands, we set the space parameter to NULL.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Introduce the flag TPM_TRANSMIT_RAW that allows us to transmit
a command without recursing into the requesting of locality.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Suppress the error logging when the core TPM driver sends commands
to the VTPM proxy driver and -EPIPE is returned in case the VTPM
proxy driver is 'closed' (closed anonymous file descriptor). This
error code is only returned by the send function and by tpm_transmit
when the VTPM proxy driver is being used.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
sparse complains that tpmrm_write can be made static, and since it is
right we make it static.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Removed struct tpm_pcrextend_in as it is not used for anything anymore.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
The memory copy from rodata to stack is useless.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
You should not do arithmetic with __be32 or __le32 types because
sometimes it results incorrect results. Calculations must be done only
with integers that are in in the CPU byte order. This commit migrates
tpm_getcap() to struct tpm_buf in order to sort out these issues.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
When the I2C Infineon part is attached to an I2C adapter that imposes
a size limitation, large requests will fail with -EOPNOTSUPP. Retry
them with a sane minimum size without re-issuing the 0x05 command
as this appears to occasionally put the TPM in a bad state.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
[rework the patch to adapt to the feedback received]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Now that the platform device was merged for OF support we can use the
platform device to match ACPI devices as well and run everything
through tpm_tis_init.
pnp_acpi_device is replaced with ACPI_COMPANION, and ACPI_HANDLE is
pushed further down.
platform_get_resource is used instead of acpi_dev_get_resources.
The itpm global module parameter is no longer changed during itpm
detection, instead the phy specific bit is set directly.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> (with TPM 2.0)
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (with TPM 1.2)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Replace the open coded IORESOURCE_IRQ with platform_get_irq, which
supports more cases.
Fixes: 00194826e6 ("tpm_tis: Clean up the force=1 module parameter")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> (with TPM 2.0)
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (with TPM 1.2)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The test was backwards, triggering IRQ autoprobing if the firmware
did not specify an IRQ, instead of triggering it only when the
module force parameter was specified.
Since autoprobing is not enabled on !x86 and the platform device is
currently only used on !x86, or with force, this has gone unnoticed.
Fixes: 00194826e6 ("tpm_tis: Clean up the force=1 module parameter")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> (with TPM 2.0)
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (with TPM 1.2)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In preparation of the modifications to tpm_pcr_extend(), which will
allow callers to supply a digest for each PCR bank of a TPM 2.0,
the TPM 1.2 specific code has been moved to tpm1_pcr_extend().
tpm1_pcr_extend() uses tpm_buf_init() to prepare the command buffer,
which offers protection against buffer overflow. It is called by
tpm_pcr_extend() and tpm_pm_suspend().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Move CPU native value to big-endian conversion of ordinals to the
tpm_input_header declarations.
With the previous and this patch it will now be possible to modify TPM 1.2
functions to use tpm_buf_init(), which expects CPU native value for the
tag and ordinal arguments.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In the long term, TPM 1.2 functions in the driver interface will be
modified to use tpm_buf_init().
However, tag and ordinals cannot be passed directly to tpm_buf_init(),
because this function performs CPU native to big-endian conversion of these
arguments. Since TPM_TAG_RQU_COMMAND and TPM_ORD_ are already converted,
passing them to the function will undo the previous conversion.
This patch moves the conversion of TPM_TAG_RQU_COMMAND from the tpm.h
header file in the driver directory to the tpm_input_header declarations
in the driver interface and tpm-sysfs.c.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
ACPICA commit b922ecaf9053dae3b8933664e951ed1ee8f86f07
Update to new version of the TCG/ACPI spec.
Does not include table compiler or disassembler support.
Link: https://github.com/acpica/acpica/commit/b922ecaf
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.
acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware drivers
from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and
a bunch of other driver updates. Nothing major, except if you happen to
have the hardware for these drivers, and then you will be happy :)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQvAgg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yknsACgzkAeyz16Z97J3UTaeejbR7nKUCAAoKY4WEHY
8O9f9pr9gj8GMBwxeZQa
=OIfB
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware
drivers from Google, more auxdisplay drivers, extcon drivers, fpga
drivers, and a bunch of other driver updates. Nothing major, except if
you happen to have the hardware for these drivers, and then you will
be happy :)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
firmware: google memconsole: Fix return value check in platform_memconsole_init()
firmware: Google VPD: Fix return value check in vpd_platform_init()
goldfish_pipe: fix build warning about using too much stack.
goldfish_pipe: An implementation of more parallel pipe
fpga fr br: update supported version numbers
fpga: region: release FPGA region reference in error path
fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
mei: drop the TODO from samples
firmware: Google VPD sysfs driver
firmware: Google VPD: import lib_vpd source files
misc: lkdtm: Add volatile to intentional NULL pointer reference
eeprom: idt_89hpesx: Add OF device ID table
misc: ds1682: Add OF device ID table
misc: tsl2550: Add OF device ID table
w1: Remove unneeded use of assert() and remove w1_log.h
w1: Use kernel common min() implementation
uio_mf624: Align memory regions to page size and set correct offsets
uio_mf624: Refactor memory info initialization
uio: Allow handling of non page-aligned memory regions
hangcheck-timer: Fix typo in comment
...
The main device is currently not properly released due to one additional
reference to the 'devs' device which is only released in case of a TPM 2.
So, also get the additional reference only in case of a TPM2.
Fixes: fdc915f7f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch converts tpm_tis to use of the new tpm class ops
request_locality, and relinquish_locality.
With the move to using the callbacks, release_locality is changed so
that we now release the locality even if there is no request pending.
This required some changes to the tpm_tis_core_init code path to
make sure locality is requested when needed:
- tpm2_probe code path will end up calling request/release through
callbacks, so request_locality prior to tpm2_probe not needed.
- probe_itpm makes calls to tpm_tis_send_data which no longer calls
request_locality, so add request_locality prior to tpm_tis_send_data
calls. Also drop release_locality call in middleof probe_itpm, and
keep locality until release_locality called at end of probe_itpm.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Marcel Selhorst <tpmdd@selhorst.net>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When TPM2 log has entries with more than 3 digests, or with digests
not listed in the log header, log gets misparsed, eventually
leading to kernel complaint that code tried to vmalloc 512MB of
memory (I have no idea what would happen on bigger system).
So code should not parse only first 3 digests: both event header
and event itself are already in memory, so we can parse any number
of digests, as long as we do not try to parse whole memory when
given count of 0xFFFFFFFF.
So this change:
* Rejects event entry with more digests than log header describes.
Digest types should be unique, and all should be described in
log header, so there cannot be more digests in the event than in
the header.
* Reject event entry with digest that is not described in the
log header. In theory code could hardcode information about
digest IDs already assigned by TCG, but if firmware authors
cannot get event log format right, why should anyone believe
that they got event log content right.
Cc: stable@vger.kernel.org
Fixes: 4d23cc323c ("tpm: add securityfs support for TPM 2.0 firmware event log")
Signed-off-by: Petr Vandrovec <petr@vmware.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove a useless constant that slipped through me when I did the code
review. This commit fixes the issue.
Cc: Jiandi An <anjiandi@codeaurora.org>
Fixes: 69c558de63c7 ("tpm/tpm_crb: Enable TPM CRB interface for ARM64")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This enables TPM Command Response Buffer interface driver for
ARM64 and implements an ARM specific TPM CRB start method that
invokes a Secure Monitor Call (SMC) to request the TrustZone
Firmware to execute or cancel a TPM 2.0 command.
In ARM, TrustZone security extensions enable a secure software
environment with Secure Monitor mode. A Secure Monitor Call
(SMC) is used to enter the Secure Monitor mode and perform a
Secure Monitor service to communicate with TrustZone firmware
which has control over the TPM hardware.
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (on x86/PTT)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This commit adds support for requesting and relinquishing locality 0 in
tpm_crb for the course of command transmission.
In order to achieve this, two new callbacks are added to struct
tpm_class_ops:
- request_locality
- relinquish_locality
With CRB interface you first set either requestAccess or relinquish bit
from TPM_LOC_CTRL_x register and then wait for locAssigned and
tpmRegValidSts bits to be set in the TPM_LOC_STATE_x register.
The reason why were are doing this is to make sure that the driver
will work properly with Intel TXT that uses locality 2. There's no
explicit guarantee that it would relinquish this locality. In more
general sense this commit enables tpm_crb to be a well behaving
citizen in a multi locality environment.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Since check_locality is checking to see if a certain
locality is active, return true if active otherwise
return false.
Cc: Christophe Ricard <christophe.ricard@gmail.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Marcel Selhorst <tpmdd@selhorst.net>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When PM_SLEEP is disabled crb_pm_suspend and crb_pm_resume are not used by
SET_SYSTEM_SLEEP_PM_OPS even if PM is enabled:
drvers/char/tpm/tpm_crb.c:540:12: warning: ‘crb_pm_suspend’ defined but not
used [-Wunused-function]
static int crb_pm_suspend(struct device *dev)
^
drivers/char/tpm/tpm_crb.c:551:12: warning: ‘crb_pm_resume’ defined but not
used [-Wunused-function]
static int crb_pm_resume(struct device *dev)
^
The preprocessor condition should be on CONFIG_PM_SLEEP, not on CONFIG_PM.
However, this patch fixes this warning by using __maybe_unused on function
that are in the preprocessor condition.
Fixes: 848efcfb560c ("tpm/tpm_crb: enter the low power state upon device suspend")
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently, there is an unnecessary 1 msec delay added in
i2c_nuvoton_write_status() for the successful case. This
function is called multiple times during send() and recv(),
which implies adding multiple extra delays for every TPM
operation.
This patch calls usleep_range() only if retry is to be done.
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org (linux-4.8)
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The current code passes the address of tpm_chip as the argument to
dev_get_drvdata() without prior NULL check in
tpm_ibmvtpm_get_desired_dma. This resulted an oops during kernel
boot when vTPM is enabled in Power partition configured in active
memory sharing mode.
The vio_driver's get_desired_dma() is called before the probe(), which
for vtpm is tpm_ibmvtpm_probe, and it's this latter function that
initializes the driver and set data. Attempting to get data before
the probe() caused the problem.
This patch adds a NULL check to the tpm_ibmvtpm_get_desired_dma.
fixes: 9e0d39d8a6 ("tpm: Remove useless priv field in struct tpm_vendor_specific")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkine <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Make sure size of response buffer is at least 6 bytes, or
we will underflow and pass large size_t to memcpy_fromio().
This was encountered while testing earlier version of
locality patchset.
Cc: stable@vger.kernel.org
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Sessions are different from transient objects in that their handles
may not be virtualized (because they're used for some hmac
calculations). Additionally when a session is context saved, a
vestigial memory remains in the TPM and if it is also flushed, that
will be lost and the session context will refuse to load next time, so
the code is updated to flush only transient objects after a context
save. Add a separate array (chip->session_tbl) to save and restore
sessions by handle. Use the failure of a context save or load to
signal that the session has been flushed from the TPM and we can
remove its memory from chip->session_tbl.
Sessions are also isolated during each instance of a tpm space. This
means that spaces shouldn't be able to see each other's sessions and
is enforced by ensuring that a space user may only refer to sessions
handles that are present in their own chip->session_tbl. Finally when
a space is closed, all the sessions belonging to it should be flushed
so the handles may be re-used by other spaces.
Note that if we get a session save or load error, all sessions are
effectively flushed. Even though we restore the session buffer, all
the old sessions will refuse to load after the flush and they'll be
purged from our session memory. This means that while transient
context handling is still soft in the face of errors, session handling
is hard (any failure of the model means all sessions are lost).
Fixes-from: Colin Ian King <colin.king@canonical.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently the tpm spaces are not exposed to userspace. Make this
exposure via a separate device, which can now be opened multiple times
because each read/write transaction goes separately via the space.
Concurrency is protected by the chip->tpm_mutex for each read/write
transaction separately. The TPM is cleared of all transient objects
by the time the mutex is dropped, so there should be no interference
between the kernel and userspace.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Added an ability to virtualize TPM commands into an isolated context
that we call a TPM space because the word context is already heavily
used in the TPM specification. Both the handle areas and bodies (where
necessary) are virtualized.
The mechanism works by adding a new parameter struct tpm_space to the
tpm_transmit() function. This new structure contains the list of virtual
handles and a buffer of page size (currently) for backing storage.
When tpm_transmit() is called with a struct tpm_space instance it will
execute the following sequence:
1. Take locks.
2. Load transient objects from the backing storage by using ContextLoad
and map virtual handles to physical handles.
3. Perform the transaction.
4. Save transient objects to backing storage by using ContextSave and
map resulting physical handle to virtual handle if there is such.
This commit does not implement virtualization support for hmac and
policy sessions.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Check for every TPM 2.0 command that the command code is supported and
the command buffer has at least the length that can contain the header
and the handle area.
For ContextSave and FlushContext we mark the body to be part of the
handle area. This gives validation for these commands at zero
cost, including the body of the command.
The more important reason for this is that we can virtualize these
commands in the same way as you would virtualize the handle area of a
command.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Check that the length matches the length reported by the response
header already in tpm_transmit() to improve validation.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Encapsulated crb_wait_for_reg32() so that state changes in other CRB
registers than TPM_CRB_CTRL_REQ_x can be waited.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Gang Wei <gang.wei@intel.com>
In order to provide access to locality registers, this commits adds
mapping of the head of the CRB registers, which are located right
before the control area.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Gang Wei <gang.wei@intel.com>
Testing the implementation with a Raspberry Pi 2 showed that under some
circumstances its SPI master erroneously releases the CS line before the
transfer is complete, i.e. before the end of the last clock. In this case
the TPM ignores the transfer and misses for example the GO command. The
driver is unable to detect this communication problem and will wait for a
command response that is never going to arrive, timing out eventually.
As a workaround, the small delay ensures that the CS line is held long
enough, even with a faulty SPI master. Other SPI masters are not affected,
except for a negligible performance penalty.
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Limiting transfers to MAX_SPI_FRAMESIZE was not expected by the upper
layers, as tpm_tis has no such limitation. Add a loop to hide that
limitation.
v2: Moved scope of spi_message to the top as requested by Jarkko
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Wait states are signaled in the last byte received from the TPM in
response to the header, not the first byte. Check rx_buf[3] instead of
rx_buf[0].
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Abort the transfer with ETIMEDOUT when the TPM signals more than
TPM_RETRY wait states. Continuing with the transfer in this state
will only lead to arbitrary failures in other parts of the code.
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The algorithm for sending data to the TPM is mostly identical to the
algorithm for receiving data from the TPM, so a single function is
sufficient to handle both cases.
This is a prequisite for all the other fixes, so we don't have to fix
everything twice (send/receive)
v2: u16 instead of u8 for the length.
Cc: <stable@vger.kernel.org>
Fixes: 0edbfea537 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This fix enables a platform to enter the idle state (suspend-to-idle)
The driver needs to request explicitly go_idle upon completion
from the pm suspend handler.
The runtime pm is disabled on suspend during prepare state by calling
pm_runtime_get_noresume, hence we cannot relay on runtime pm to leave
the device in low power state. Symmetrically cmdReady is called
upon resume.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Siged-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
We get a newly introduced harmless warning when CONFIG_CRYPTO is disabled:
warning: (TCG_TPM && TRUSTED_KEYS && IMA) selects CRYPTO_HASH_INFO which has unmet direct dependencies (CRYPTO)
This adds another select to avoid the warning, consistent with other users
of the crypto code.
Fixes: c1f92b4b04 ("tpm: enhance TPM 2.0 PCR extend to support multiple banks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Commit 500462a9de "timers: Switch to a non-cascading wheel" replaced
the 'classic' timer wheel, which aimed for near 'exact' expiry of the
timers. Their analysis was that the vast majority of timeout timers
are used as safeguards, not as real timers, and are cancelled or
rearmed before expiration. The only exception noted to this were
networking timers with a small expiry time.
Not included in the analysis was the TPM polling timer, which resulted
in a longer normal delay and, every so often, a very long delay. The
non-cascading wheel delay is based on CONFIG_HZ. For a description of
the different rings and their delays, refer to the comments in
kernel/time/timer.c.
Below are the delays given for rings 0 - 2, which explains the longer
"normal" delays and the very, long delays as seen on systems with
CONFIG_HZ 250.
* HZ 1000 steps
* Level Offset Granularity Range
* 0 0 1 ms 0 ms - 63 ms
* 1 64 8 ms 64 ms - 511 ms
* 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s)
* HZ 250
* Level Offset Granularity Range
* 0 0 4 ms 0 ms - 255 ms
* 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s)
* 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s)
Below is a comparison of extending the TPM with 1000 measurements,
using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250
hz, before and after commit 500462a9de.
linux-4.7 | msleep() usleep_range()
1000 hz: 0m44.628s | 1m34.497s 29.243s
250 hz: 1m28.510s | 4m49.269s 32.386s
linux-4.7 | min-max (msleep) min-max (usleep_range)
1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s
250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s
This patch replaces the msleep() with usleep_range() calls in the
i2c nuvoton driver with a consistent max range value.
Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org (linux-4.8)
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The expectation is that the if the CRB cmd/rsp buffer falls within the
ACPI region that the entire buffer will be within the reason. Otherwise
resource reservation will fail when it crosses regions.
Work around this BIOS bug by limiting the cmd/rsp buffer to the length
of the declared ACPI region. BIOS vendors should fix this by making
the ACPI and register length declarations consistent.
Reported-by: Davide Guerri <davide.guerri@gmail.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Davide Guerri <davide.guerri@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
TIS v1.3 for TPM 1.2 and PTP for TPM 2.0 disagree about which timeout
value applies to reading a valid burstcount. It is TIMEOUT_D according to
TIS, but TIMEOUT_A according to PTP, so choose the appropriate value
depending on whether we deal with a TPM 1.2 or a TPM 2.0.
This is important since according to the PTP TIMEOUT_D is much smaller
than TIMEOUT_A. So the previous implementation could run into timeouts
with a TPM 2.0, even though the TPM was behaving perfectly fine.
During tpm2_probe TIMEOUT_D will be used even with a TPM 2.0, because
TPM_CHIP_FLAG_TPM2 is not yet set. This is fine, since the timeout values
will only be changed afterwards by tpm_get_timeouts. Until then
TIS_TIMEOUT_D_MAX applies, which is large enough.
Cc: stable@vger.kernel.org
Fixes: aec04cbdf7 ("tpm: TPM 2.0 FIFO Interface")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Replace the open coded registration of the cdev and dev with the
new device_add_cdev() helper. The helper replaces a common pattern by
taking the proper reference against the parent device and adding both
the cdev and the device.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to export tpm2_get_pcr_alloation() because it is only
a helper function for tpm2_auto_startup(). For the same reason it does
not make much sense to maintain documentation for it.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The TPM1.2 PCR Extend operation only returns 20 bytes in the body,
which is the size of the PCR state.
This fixes a problem where IMA gets errors with every PCR Extend.
Fixes: c659af78eb ("tpm: Check size of response before accessing data")
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The call that used chip was dropped in 1f0f30e404. Drop the
leftover declaration and initialization.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
I typoed "facilitate" as "faciltate" a few years back...
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add the missing platform_driver_unregister() and remove the duplicate
platform_device_unregister(force_pdev) in the error handling case.
Fixes: 00194826e6 ("tpm_tis: Clean up the force=1 module parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
We should check that we're within bounds first before checking that
"chip->active_banks[i] != TPM2_ALG_ERROR" so I've re-ordered the two
checks.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In cap_t the size of the type bool is assumed to be one byte. This
commit sorts out the issue by changing the type to u8.
Fixes: c659af78eb ("tpm: Check size of response before accessing data")
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Unlike the device driver support for TPM 1.2, the TPM 2.0 does
not support the securityfs pseudo files for displaying the
firmware event log.
This patch enables support for providing the TPM 2.0 event log in
binary form. TPM 2.0 event log supports a crypto agile format that
records multiple digests, which is different from TPM 1.2. This
patch enables the tpm_bios_log_setup for TPM 2.0 and adds the
event log parser which understand the TPM 2.0 crypto agile format.
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Physical TPMs use Open Firmware Device Tree bindings that are similar
to the IBM Power virtual TPM to support event log. However, these
properties store the values in different endianness for Physical
and Virtual TPM.
This patch fixes the endianness issue by doing appropriate conversion
based on Physical or Virtual TPM.
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The current TPM 2.0 device driver extends only the SHA1 PCR bank
but the TCG Specification[1] recommends extending all active PCR
banks, to prevent malicious users from setting unused PCR banks with
fake measurements and quoting them.
The existing in-kernel interface(tpm_pcr_extend()) expects only a
SHA1 digest. To extend all active PCR banks with differing
digest sizes, the SHA1 digest is padded with trailing 0's as needed.
This patch reuses the defined digest sizes from the crypto subsystem,
adding a dependency on CRYPTO_HASH_INFO module.
[1] TPM 2.0 Specification referred here is "TCG PC Client Specific
Platform Firmware Profile for TPM 2.0"
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch implements the TPM 2.0 capability TPM_CAP_PCRS to
retrieve the active PCR banks from the TPM. This is needed
to enable extending all active banks as recommended by TPM 2.0
TCG Specification.
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The error code handling is broken as any error code that has the same
bits set as TPM_RC_HASH passes. Implemented tpm2_rc_value() helper to
parse the error value from FMT0 and FMT1 error codes so that these types
of mistakes are prevented in the future.
Fixes: 5ca4c20cfd ("keys, trusted: select hash algorithm for TPM2 chips")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
probe_itpm() function is supposed to send command without an itpm flag set
and if this fails to repeat it, this time with the itpm flag set.
However, commit 41a5e1cf1f ("tpm/tpm_tis: Split tpm_tis driver into a
core and TCG TIS compliant phy") moved the itpm flag from an "itpm"
variable to a TPM_TIS_ITPM_POSSIBLE chip flag, so setting the
(now function-local) itpm variable no longer had any effect.
Finally, this function-local itpm variable was removed by
commit 56af322156 ("tpm/tpm_tis: remove unused itpm variable")
Tested only on non-iTPM TIS TPM.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
For a long time the cdev read/write interface had this strange
idea that userspace had to read the result within 60 seconds otherwise
it is discarded. Perhaps this made sense under some older locking regime,
but in the modern kernel it is not required and is just dangerous.
Since something may be relying on this, double the timeout and print a
warning. We can remove the code in a few years, but this should be
enough to prevent new users.
Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
These are non-generic functions and do not belong to tpm.h.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Make sure that we have not received less bytes than what is indicated
in the header of the TPM response. Also, check the number of bytes in
the response before accessing its data.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Since commit 1107d065fd ("tpm_tis: Introduce intermediate layer for
TPM access") Atmel 3203 TPM on ThinkPad X61S (TPM firmware version 13.9)
no longer works. The initialization proceeds fine until we get and
start using chip-reported timeouts - and the chip reports C and D
timeouts of zero.
It turns out that until commit 8e54caf407 ("tpm: Provide a generic
means to override the chip returned timeouts") we had actually let
default timeout values remain in this case, so let's bring back this
behavior to make chips like Atmel 3203 work again.
Use a common code that was introduced by that commit so a warning is
printed in this case and /sys/class/tpm/tpm*/timeouts correctly says the
timeouts aren't chip-original.
Fixes: 1107d065fd ("tpm_tis: Introduce intermediate layer for TPM access")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This is a regression when this code was reworked and made the error
print unconditional. The original code deliberately suppressed printing
of the first error message so it could quietly sense
TPM_ERR_INVALID_POSTINIT.
Fixes: a502feb67b47 ("tpm: Clean up reading of timeout and duration capabilities")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
crb_check_resource() in TPM CRB driver calls
acpi_dev_resource_memory() which only handles 32-bit resources.
Adding a call to acpi_dev_resource_address_space() in TPM CRB
driver which handles 64-bit resources.
Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Drop duplicate header module.h from tpm_tis_spi.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm/st33zp24/st33zp24.c does not use any miscdevice so this patch remove
this unnecessary inclusion.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use corret kdoc format for function description and eliminate warning
of type:
tpm_ibmvtpm.c:66: warning: No description found for parameter 'count'
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The tpm stack uses pdev name convention for the parent device.
Fix that also in tpm_chip_alloc().
Fixes: 3897cd9c8d ("tpm: Split out the devm stuff from tpmm_chip_alloc")'
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use correct kdoc format, describe correct parameters and return values.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Functions tpm_transmit and transmit_cmd are referenced
from other functions kdoc hence deserve documentation.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Merge more updates from Andrew Morton:
- a few misc things
- kexec updates
- DMA-mapping updates to better support networking DMA operations
- IPC updates
- various MM changes to improve DAX fault handling
- lots of radix-tree changes, mainly to the test suite. All leading up
to reimplementing the IDA/IDR code to be a wrapper layer over the
radix-tree. However the final trigger-pulling patch is held off for
4.11.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
radix tree test suite: delete unused rcupdate.c
radix tree test suite: add new tag check
radix-tree: ensure counts are initialised
radix tree test suite: cache recently freed objects
radix tree test suite: add some more functionality
idr: reduce the number of bits per level from 8 to 6
rxrpc: abstract away knowledge of IDR internals
tpm: use idr_find(), not idr_find_slowpath()
idr: add ida_is_empty
radix tree test suite: check multiorder iteration
radix-tree: fix replacement for multiorder entries
radix-tree: add radix_tree_split_preload()
radix-tree: add radix_tree_split
radix-tree: add radix_tree_join
radix-tree: delete radix_tree_range_tag_if_tagged()
radix-tree: delete radix_tree_locate_item()
radix-tree: improve multiorder iterators
btrfs: fix race in btrfs_free_dummy_fs_info()
radix-tree: improve dump output
radix-tree: make radix_tree_find_next_bit more useful
...
idr_find_slowpath() is not intended to be part of the public API, it's
an implementation detail. There's no reason to skip straight to the
slowpath here.
Link: http://lkml.kernel.org/r/1480369871-5271-64-git-send-email-mawilcox@linuxonhyperv.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Marcel Selhorst <tpmdd@selhorst.net>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull security subsystem updates from James Morris:
"Generally pretty quiet for this release. Highlights:
Yama:
- allow ptrace access for original parent after re-parenting
TPM:
- add documentation
- many bugfixes & cleanups
- define a generic open() method for ascii & bios measurements
Integrity:
- Harden against malformed xattrs
SELinux:
- bugfixes & cleanups
Smack:
- Remove unnecessary smack_known_invalid label
- Do not apply star label in smack_setprocattr hook
- parse mnt opts after privileges check (fixes unpriv DoS vuln)"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (56 commits)
Yama: allow access for the current ptrace parent
tpm: adjust return value of tpm_read_log
tpm: vtpm_proxy: conditionally call tpm_chip_unregister
tpm: Fix handling of missing event log
tpm: Check the bios_dir entry for NULL before accessing it
tpm: return -ENODEV if np is not set
tpm: cleanup of printk error messages
tpm: replace of_find_node_by_name() with dev of_node property
tpm: redefine read_log() to handle ACPI/OF at runtime
tpm: fix the missing .owner in tpm_bios_measurements_ops
tpm: have event log use the tpm_chip
tpm: drop tpm1_chip_register(/unregister)
tpm: replace dynamically allocated bios_dir with a static array
tpm: replace symbolic permission with octal for securityfs files
char: tpm: fix kerneldoc tpm2_unseal_trusted name typo
tpm_tis: Allow tpm_tis to be bound using DT
tpm, tpm_vtpm_proxy: add kdoc comments for VTPM_PROXY_IOC_NEW_DEV
tpm: Only call pm_runtime_get_sync if device has a parent
tpm: define a generic open() method for ascii & bios measurements
Documentation: tpm: add the Physical TPM device tree binding documentation
...
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The event log is an optional firmware feature, if the firmware
does not support it then the securityfs files should not be created
and no other notification given.
- Uniformly return -ENODEV from the tpm_bios_log_setup cone if
no event log is detected.
- Check in ACPI if this node was discovered via ACPI.
- Improve the check in OF to make sure there is a parent and to
fail detection if the two log properties are not declared
- Pass through all other error codes instead of filtering just some
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Check the bios_dir entry for NULL before accessing it. Currently
this crashes the driver when a TPM 2 is attached and the entries
are NULL.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
device_node np contains a garbage value from the stack and it
is only set if chip->dev.parent->of_node is not null. Thus the
check for a null np won't spot a garbage value of np from the
stack if chip->dev.parent->of_node is null and if np contains
an garbage non-null value.
I believe the correct fix is to return -ENODEV if and only if
chip->dev.parent->of_node is null.
Found with static analysis by CoverityScan, CID 1377755
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch removes the unnecessary error messages on failing to
allocate memory and replaces pr_err/printk with dev_dbg/dev_info
as applicable.
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Using the device of_node property is a better way to refer to the
device tree node rather than of_find_node_by_name().
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently, read_log() has two implementations: one for ACPI platforms
and the other for device tree(OF) based platforms. The proper one is
selected at compile time using Kconfig and #ifdef in the Makefile,
which is not the recommended approach.
This patch removes the #ifdef in the Makefile by defining a single
read_log() method, which checks for ACPI/OF event log properties at
runtime.
[jarkko.sakkinen@linux.intel.com: added tpm_ prefix to read_log*]
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch fixes the missing .owner field in
tpm_bios_measurements_ops definition.
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Move the backing memory for the event log into tpm_chip and push
the tpm_chip into read_log. This optimizes read_log processing by
only doing it once and prepares things for the next patches in the
series which require the tpm_chip to locate the event log via
ACPI and OF handles instead of searching.
This is straightfoward except for the issue of passing a kref through
i_private with securityfs. Since securityfs_remove does not have any
removal fencing like sysfs we use the inode lock to safely get a
kref on the tpm_chip.
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Check for TPM2 chip in tpm_sysfs_add_device, tpm_bios_log_setup and
tpm_bios_log_teardown in order to make code flow cleaner and to enable
to implement TPM 2.0 support later on. This is partially derived from
the commit by Nayna Jain with the extension that also tpm1_chip_register
is dropped.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com>
This commit is based on a commit by Nayna Jain. Replaced dynamically
allocated bios_dir with a static array as the size is always constant.
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
checkpatch.pl flags warning for symbolic permissions and suggests
to replace with octal value.
This patch changes securityfs pseudo files permission
to octal values in tpm_bios_log_setup().
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This provides an open firwmare driver binding for tpm_tis. OF
is useful on arches where ACPI/PNP is not used.
The tcg,tpm-tis-mmio register map interface is specified by the TCG.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Added kdoc comments for VTPM_PROXY_IOC_NEW_DEV so that these can be
imported to the kernel documentation written with rst markup and
generated with Sphinx.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Only call pm_runtime_get_sync if the device has a parent. This
change fixes a crash in the tpm_vtpm_proxy driver since that
driver does not have a parent device.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
open() method for event log ascii and binary bios measurements file
operations are very similar. This patch refactors the code into a
single open() call by passing seq_operations as i_node->private data.
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This is no longer necessary, all calls to tpm_chip_unregister happen
in remove() callbacks.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm_chip_unregister can only be called after tpm_chip_register.
devm manages the allocation so no unwind is needed here.
Cc: stable@vger.kernel.org
Fixes: afb5abc262 ("tpm: two-phase chip management functions")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The tis driver does a tpm_get_timeouts out side of tpm_chip_register,
and tpm_get_timeouts can print a message, resulting in two prints, eg:
tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 10000->750000us B 10000->2000000us C 10000->750000us D 10000->750000us
Keep track and prevent tpm_get_timeouts from running a second time, and
clarify the purpose of the call in tpm_tis_core to only be connected to
irq testing.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
If the TPM we're connecting to uses a static burst count, it will report
a burst count of zero throughout the response read. However, get_burstcount
assumes that a response of zero indicates that the TPM is not ready to
receive more data. In this case, it returns a negative error code, which
is passed on to tpm_tis_{write,read}_bytes as a u16, causing
them to read/write far too many bytes.
This patch checks for negative return codes and bails out from recv_data
and tpm_tis_send_data.
Cc: stable@vger.kernel.org
Fixes: 1107d065fd (tpm_tis: Introduce intermediate layer for TPM access)
Signed-off-by: Josh Zimmerman <joshz@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Place kdoc just above tpm_pcr_extend so it can be parsed correctly.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use cpu_to_b32 at the time it is needed in enum tpm_capabilities and
enum tpm_sub_capabilities in order to be consistent with the other
enums in drivats/char/tpm/tpm.h.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Call tpm_getcap() from tpm_get_timeouts() to eliminate redundant
code. Return all errors to the caller rather than swallowing them
(e.g. when tpm_transmit_cmd() returns nonzero).
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In some weird cases it might be possible that the TPM does not set
STS.VALID within the given timeout time (or ever) but sets STS.EXPECT
(STS=0x0C) In this case the driver gets stuck in the while loop of
tpm_tis_send_data and loops endlessly.
Checking the return value of wait_for_tpm_stat fixes this and the driver
bails out correctly. While at it fixing all other users since if the
TPM does not manage to set STS.VALID within the reasonable timeframe
something is definitely wrong and the driver should react correctly.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Utilize runtime_pm for driving tpm crb idle states.
The framework calls cmd_ready from the pm_runtime_resume handler
and go idle from the pm_runtime_suspend handler.
The TPM framework should wake the device before transmit and receive.
In case the runtime_pm framework is not compiled in or enabled, the device
will be in the permanent ready state.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This is preparation step for implementing tpm crb
runtime pm. We need to have tpm chip allocated
and populated before we access the runtime handlers.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
There is a HW bug in Skylake, and Broxton PCH Intel PTT device, where
most of the registers in the control area except START, REQUEST, CANCEL,
and LOC_CTRL lost retention when the device is in the idle state. Hence
we need to bring the device to ready state before accessing the other
registers. The fix brings device to ready state before trying to read
command and response buffer addresses in order to remap the for access.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinn@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinn@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The register TPM_CRB_CTRL_REQ_x contains bits goIdle and cmdReady for
SW to indicate that the device can enter or should exit the idle state.
The legacy ACPI-start (SMI + DMA) based devices do not support these
bits and the idle state management is not exposed to the host SW.
Thus, this functionality only is enabled only for a CRB start (MMIO)
based devices.
Based on Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
original patch:
'tpm_crb: implement power tpm crb power management'
To keep the implementation local to the hw we don't use wait_for_tpm_stat
for polling the TPM_CRB_CTRL_REQ.
[jarkko.sakkinen@linux.intel.com: removed cmdReady debug trace on a
success case due the heavy amount of log traffic it causes.]
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use xenbus_read_unsigned() instead of xenbus_scanf() when possible.
This requires to change the type of one read from int to unsigned,
but this case has been wrong before: negative values are not allowed
for the modified case.
Cc: peterhuewe@gmx.de
Cc: tpmdd@selhorst.net
Cc: jarkko.sakkinen@linux.intel.com
Cc: jgunthorpe@obsidianresearch.com
Cc: tpmdd-devel@lists.sourceforge.net
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Removal of this check was not properly amended to the original commit.
Cc: stable@vger.kernel.org
Fixes: 0c54133223 ("tpm: use tpm_pcr_read_dev() in tpm_do_selftest()")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Utilize runtime_pm for driving tpm crb idle states.
The framework calls cmd_ready from the pm_runtime_resume handler
and go idle from the pm_runtime_suspend handler.
The TPM framework should wake the device before transmit and receive.
In case the runtime_pm framework is not enabled, the device will be in
ready state.
[jarkko.sakkinen@linux.intel.com: changed pm_runtime_put_sync()
to pm_runtime_put()]
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This is preparation step for implementing tpm crb
runtime pm. We need to have tpm chip allocated
and populated before we access the runtime handlers.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinn@linux.intel.com>
There is a HW bug in Skylake, and Broxton PCH Intel PTT device, where
most of the registers in the control area except START, REQUEST, CANCEL,
and LOC_CTRL lost retention when the device is in the idle state. Hence
we need to bring the device to ready state before accessing the other
registers. The fix brings device to ready state before trying to read
command and response buffer addresses in order to remap the for access.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinn@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinn@linux.intel.com>
The register TPM_CRB_CTRL_REQ_x contains bits goIdle and cmdReady for
SW to indicate that the device can enter or should exit the idle state.
The legacy ACPI-start (SMI + DMA) based devices do not support these
bits and the idle state management is not exposed to the host SW.
Thus, this functionality only is enabled only for a CRB start (MMIO)
based devices.
Based on Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
original patch:
'tpm_crb: implement power tpm crb power management'
To keep the implementation local to the hw we don't use wait_for_tpm_stat
for polling the TPM_CRB_CTRL_REQ.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm_transmit() does not check that bufsiz is at least TPM_HEADER_SIZE
before accessing data. This commit adds this check and returns -EINVAL
if it fails.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Constify TPM 1.x header structures in order to move them to rodata
section as they are meant to be never changed during runtime.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Because of the line break in the debug print the chackpatch is
not silent on 80 characters limitation.
The easiest fix is to straighten the lines, it's also more readable.
WARNING: line over 80 characters
+ FW_BUG "TPM2 ACPI table does not define a memory
resource\n");
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Don't apply endianity conversion when writing to the registers
this is already handled by the system.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Instead of expensive register access on retrieving cmd_size
on each send, save the value during initialization in the private
context. The value doesn't change.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The platform device is not used in this driver, drop the
include to linux/platform_device.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fixes the warning:
drivers/char/tpm/tpm_tis_core.c:443:7: warning: variable ‘itpm’ set but
not used [-Wunused-but-set-variable]
bool itpm;
^~~~
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Renamed CRB protocol specific constants to match the TCG PC Client
Platform TPM Profile (PTP) Specification and driver status constants
to be explicit that they are driver specific.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The req_canceled() callback is used by tpm_transmit() periodically to
check whether the request has been canceled while it is receiving a
response from the TPM.
The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel
callback, which has two consequences:
* Cancel might not happen.
* req_canceled() always returns zero.
A better place to clear the register is when starting to send a new
command. The behavior of TPM_CRB_CTRL_CANCEL is described in the
section 5.5.3.6 of the PTP specification.
CC: stable@vger.kernel.org
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Instead of a ad-hoc protocol message construction it is better to
call tpm_pcr_read_dev().
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
It is better to tpm_transmit_cmd() in tpm2_probe() in order to get
consistent command handling throughout the subsystem.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Since tpm_gen_interrupt() is only used in tpm_tis_core.c this commit
replaces it with an internal tpm_tis_gen_interrupt(). The semantics
also changed in a way that on a system error the driver initialization
is failed.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Removed unnecessary externs from tpm.h.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
This function should only be called as part of an IRQ probing protocol
and st33 does not have any code to detect that the IRQ it tries to
generate was not generated and disable the IRQ.
Since st33 is primarily a DT binding driver it should not be doing
IRQ probing anyhow, so let us just delete this useless call.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Unseal and load operations should be done as an atomic operation. This
commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted()
can do the locking by itself.
Fixes: 0fe5480303 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
The driver emits invalid self test error message even though the init
succeeds.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fixes: cae8b441fc ("tpm: Factor out common startup code")
Reviewed-by: James Morris <james.l.morris@oracle.com>
The command flow is exactly the same, the core simply needs to be
told to enable TPM2 mode when the compatible string indicates a
TPM2.
Signed-off-by: Andrew Azmansky <andrew.zamansky@nuvoton.com>
Tested-by: Andrew Zamansky <andrew.zamansky@nuvoton.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The TCG standard startup sequence (get timeouts, tpm startup, etc) for
TPM and TPM2 chips is being open coded in many drivers, move it into
the core code.
tpm_tis and tpm_crb are used as the basis for the core code
implementation and the easy drivers are converted. In the process
several small drivers bugs relating to error handling this flow
are fixed.
For now the flag TPM_OPS_AUTO_STARTUP is optional to allow a staged
driver roll out, but ultimately all drivers should use this flow and
the flag removed. Some drivers still do not implement the startup
sequence at all and will need to be tested with it enabled.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Andrew Zamansky <andrew.zamansky@nuvoton.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
If devm_add_action() fails we are explicitly calling put_device() to
free the resources allocated. Lets use the helper
devm_add_action_or_reset() and return directly in case of error, as we
know that the cleanup function has been already called by the helper if
there was any error.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In 570a3609 IRQ path is incorrectly always exercised while it should be
exercised only when there is an IRQ number allocated. This commit
reverts the old behavior.
[jarkko.sakkinen@linux.intel.com: updated description]
Fixes: 570a36097f ("tpm: drop 'irq' from struct tpm_vendor_specific")
Signed-off-by: Andrew Zamansky <andrew.zamansky@nuvoton.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Some chips incorrectly support partial reads from TPM_STS register
at non-zero offsets. Read the entire 32-bits register instead of
making two 8-bit reads to support such devices and reduce the number
of bus transactions when obtaining the burstcount from TPM_STS.
Fixes: 27084efee0 ("tpm: driver for next generation TPM chips")
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The result must be converted from BE byte order, which is used by the
TPM2 protocol. This has not popped out because tpm2_get_tpm_pt() has
been only used for probing.
Fixes: 7a1d7e6dd7 ("tpm: TPM 2.0 baseline support")
Change-Id: I7d71cd379b1a3b7659d20a1b6008216762596590
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm_tis_core was missing conversion from msec when assigning max
timeouts from constants.
Fixes: aec04cbdf7 ("tpm: TPM 2.0 FIFO Interface")
Signed-off-by: Andrey Pronin <apronin@chromium.org>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Spi protocol standardized by the TCG is now supported by most of TPM
vendors.
It supports SPI Bit Protocol as describe in the TCG PTP
specification (chapter 6.4.6 SPI Bit Protocol).
Irq mode is not supported.
This commit is based on the initial work by Peter Huewe.
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To avoid code duplication between the old tpm_tis and the new and future
native tcg tis driver(ie: spi, i2c...), the tpm_tis driver was reworked,
so that all common logic is extracted and can be reused from all drivers.
The core methods can also be used from other TIS like drivers.
itpm workaround is now managed with a specific tis flag
TPM_TIS_ITPM_POSSIBLE.
This commit is based on the initial work by Peter Huewe.
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This splits tpm_tis in a high-level protocol part and a low-level interface
for the actual TPM communication. The low-level interface can then be
implemented by additional drivers to provide access to TPMs using other
mechanisms, for example native I2C or SPI transfers, while still reusing
the same TIS protocol implementation.
Though the ioread/iowrite calls cannot fail, other implementations of this
interface might want to return error codes if their communication fails.
This follows the usual pattern of negative values representing errors and
zero representing success. Positive values are not used (yet).
Errors are passed back to the caller if possible. If the interface of a
function does not allow that, it tries to do the most sensible thing it
can, but this might also mean ignoring the error in this instance.
This commit is based on the initial work by Peter Huewe.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Split priv_data structure in common and phy specific structures. This will
allow in future patches to reuse the same tis logic on top of new phy such
as spi and i2c. Ultimately, other drivers may reuse this tis logic.
(e.g: st33zp24...)
iobase field is specific to TPM addressed on 0xFED4xxxx on LPC/SPI bus.
This commit is based on the initial work by Peter Huewe.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add missing include guards in tpm.h
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fix the suspend regression due to the wrong way of retrieving the
chip structure. The suspend functions are attached to the hardware
device, not the chip and thus must rely on drvdata.
Fixes: e89f8b1ade9cc1a ("tpm: Remove all uses of drvdata from the TPM Core")
Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Jeremiah Mahler <jmmahler@gmail.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Fixes: 28157164b056 ("tpm: Remove useless priv field in struct tpm_vendor_specific")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The newly added vtpmx driver fails to build if CONFIG_ANON_INODES
is disabled:
drivers/char/built-in.o: In function `vtpmx_fops_ioctl':
(.text+0x97f8): undefined reference to `anon_inode_getfile'
This adds a Kconfig 'select' statement to ensure it's always there
when we need it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 794c38e01358 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Acked-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The devm for the IRQ was placed on the chip, not the pdev. This can
cause the irq to be still callable after the pdev has been cleaned up
(eg priv kfree'd).
Found by CONFIG_DEBUG_SHIRQ=y
Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Fixes: 233a065e0cd0 ("tpm: Get rid of chip->pdev")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch implements a proxy driver for supporting multiple emulated TPMs
in a system.
The driver implements a device /dev/vtpmx that is used to created
a client device pair /dev/tpmX (e.g., /dev/tpm10) and a server side that
is accessed using a file descriptor returned by an ioctl.
The device /dev/tpmX is the usual TPM device created by the core TPM
driver. Applications or kernel subsystems can send TPM commands to it
and the corresponding server-side file descriptor receives these
commands and delivers them to an emulated TPM.
The driver retrievs the TPM 1.2 durations and timeouts. Since this requires
the startup of the TPM, we send a startup for TPM 1.2 as well as TPM 2.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
CC: linux-kernel@vger.kernel.org
CC: linux-doc@vger.kernel.org
CC: linux-api@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Introduce TPM_CHIP_FLAG_VIRTUAL to be used when the chip device has no
parent device.
Prevent sysfs entries requiring a parent device from being created.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The final thing preventing this was the way the sysfs files were
attached to the pdev. Follow the approach developed for ppi and move
the sysfs files to the chip->dev with symlinks from the pdev
for compatibility. Everything in the core now sanely uses container_of
to get the chip.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove useless priv field in struct tpm_vendor_specific and take benefit
of chip->dev.driver_data. As priv is the latest field available in
struct tpm_vendor_specific, remove any reference to that structure.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Move tpm_vendor_specific data related to TCG PTP specification to tpm_chip.
Move all fields directly linked with well known TCG concepts and used in
TPM drivers (tpm_i2c_atmel, tpm_i2c_infineon, tpm_i2c_nuvoton, tpm_tis
and xen-tpmfront) as well as in TPM core files (tpm-sysfs, tpm-interface
and tpm2-cmd) in tpm_chip.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Dropped the field 'locality' from struct tpm_vendor_specific migrated it to
the private structures of st33zp24, tpm_i2c_infineon and tpm_tis.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Dropped the field 'read_queue' from struct tpm_vendor_specific and make it
available to the various private structures in the drivers.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Dropped the field 'irq' from struct tpm_vendor_specific and make it
available to the various private structures in the drivers using irqs.
A dedicated flag TPM_CHIP_FLAG_IRQ is added for the upper layers.
In st33zp24, struct st33zp24_dev declaration is moved to st33zp24.h in
order to make accessible irq from other phy's(i2c, spi).
In tpm_i2c_nuvoton, chip->vendor.priv is not directly allocated. We can
access irq field from priv_data in a cleaner way.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Dropped the field 'iobase' from struct tpm_vendor_specific and migrated
it to the private structures of tpm_atmel and tpm_tis.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Dropped list from struct tpm_vendor_specific as it is not used in any
place.
It is initialized in tpm_i2c_infineon but not used at all in the code.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Removed the field because it is not used for anything.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Dropped the field 'base' from struct tpm_vendor_specific and migrated
it to the private structures of tpm_atmel and tpm_nsc.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Dropped manufacturer_id from struct tpm_vendor_specific and redeclared
it in the private struct priv_data that tpm_tis uses because the field
is only used tpm_tis.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Introduced a private struct tpm_atmel_priv that contains the variables
have_region and region_size that were previously located in struct
tpm_vendor_specific. These fields were only used by tpm_atmel.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Drop field int_queue from tpm_vendor_specific as it is used only by
tpm_tis. Probably all of the fields should be eventually dropped and
moved to the private structures of different drivers but it is better to
do this one step at a time in order not to break anything.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Fixes: 20e0152393b41 ("tpm: fix crash in tpm_tis deinitialization")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
On my Lenovo x250 the following situation occurs:
[18697.813871] tpm_crb MSFT0101:00: can't request region for resource
[mem 0xacdff080-0xacdfffff]
The mapping of the control area overlaps the mapping of the command
buffer. The control area is mapped over page, which is not right. It
should mapped over sizeof(struct crb_control_area).
Fixing this issue unmasks another issue. Command and response buffers
can overlap and they do interleave on this machine. According to the PTP
specification the overlapping means that they are mapped to the same
buffer.
The commit has been also on a Haswell NUC where things worked before
applying this fix so that the both code paths for response buffer
initialization are tested.
Cc: stable@vger.kernel.org
Fixes: 1bd047be37 ("tpm_crb: Use devm_ioremap_resource")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
We can get rid of tpm_reg variable in get_burstcount.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When st33zp24_spi_acpi_request_resources() gets called we
already know that the entries in ->acpi_match_table have matched ACPI ID
of the device.
In addition spi_device pointer cannot be NULL in any case (otherwise I2C
core would not call ->probe() for the driver in the first place).
Drop the two useless checks from the driver.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When st33zp24_i2c_acpi_request_resources() gets called we
already know that the entries in ->acpi_match_table have matched ACPI ID
of the device.
In addition I2C client pointer cannot be NULL in any case (otherwise I2C
core would not call ->probe() for the driver in the first place).
Drop the two useless checks from the driver.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The iomem resource is needed only temporarily so it is better to pass
it on instead of storing it permanently. Named the variable as io_res
so that the code better documents itself.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
rmmod crashes the driver because tpm_chip_unregister() already sets ops
to NULL. This commit fixes the issue by moving tpm2_shutdown() to
tpm_chip_unregister(). This commit is also cleanup because it removes
duplicate code from tpm_crb and tpm_tis to the core.
Fixes: 4d3eac5e156a ("tpm: Provide strong locking for device removal")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Created a local variable pointing to the INT_ENABLE_x register. The
expression clearing INT_ENABLE_x.globalIntEnable is unreadable and
hard to modify without surpassing the 80 char boundary.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Christophe Ricard <christophe-h.ricard@st.com>
A cleanup patch changed the prototype of the regular tpm_bios_log_setup
function, but not that of the stub that is used when the TPM is disabled,
causing a harmless build warning:
drivers/char/tpm/tpm-chip.c: In function 'tpm1_chip_register':
drivers/char/tpm/tpm-chip.c:287:38: error: passing argument 1 of 'tpm_bios_log_setup' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
chip->bios_dir = tpm_bios_log_setup(dev_name(&chip->dev));
In file included from ../drivers/char/tpm/tpm-chip.c:30:0:
../drivers/char/tpm/tpm_eventlog.h:83:31: note: expected 'char *' but argument is of type 'const char *'
static inline struct dentry **tpm_bios_log_setup(char *name)
This changes the stub function to match the normal prototype,
avoiding that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aca8db8088c3 ("tpm: Get rid of devname")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Replace the device number bitmap with IDR. Extend the number of devices we
can create to 64k.
Since an IDR allows us to associate a pointer with an ID, we use this now
to rewrite tpm_chip_find_get() to simply look up the chip pointer by the
given device ID.
Protect the IDR calls with a mutex.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm_chip_alloc becomes a typical subsystem allocate call.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Now that the tpm core has strong locking around 'ops' it is possible
to remove a TPM driver, module and all, even while user space still
has things like /dev/tpmX open. For consistency and simplicity, drop
the module locking entirely.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add a read/write semaphore around the ops function pointers so
ops can be set to null when the driver un-registers.
Previously the tpm core expected module locking to be enough to
ensure that tpm_unregister could not be called during certain times,
however that hasn't been sufficient for a long time.
Introduce a read/write semaphore around 'ops' so the core can set
it to null when unregistering. This provides a strong fence around
the driver callbacks, guaranteeing to the driver that no callbacks
are running or will run again.
For now the ops_lock is placed very high in the call stack, it could
be pushed down and made more granular in future if necessary.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Now that we have a proper struct device just use dev_name() to
access this value instead of keeping two copies.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This is a hold over from before the struct device conversion.
- All prints should be using &chip->dev, which is the Linux
standard. This changes prints to use tpm0 as the device name,
not the PnP/etc ID.
- The few places involving sysfs/modules that really do need the
parent just use chip->dev.parent instead
- We no longer need to get_device(pdev) in any places since it is no
longer used by any of the code. The kref on the parent is held
by the device core during device_add and dropped in device_del
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Simplify st33zp24_spi_acpi_request_resources, st33zp24_spi_of_request_resources
and st33zp24_spi_request_resources to have the same prototype and using
spi_get_drvdata.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Simplify st33zp24_i2c_acpi_request_resources, st33zp24_i2c_of_request_resources
and st33zp24_i2c_request_resources to have the same prototype and using
i2c_get_clientdata.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add check in st33zp24_spi_evaluate_latency helping to diagnose if the chip
is present or in a bad state.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
DT headers already define NOOP routines when CONFIG_OF is not defined.
[jarkko.sakkinen@linux.intel.com: I tested that the driver compiles
without warnings and errors with and without CONFIG_OF flag.]
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove spi_xfer from st33zp24_spi_phy structure and declare local spi_xfer
when needed instead.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
An affectation is enough when copying 1 byte. Remove memcpy usage where
possible.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Make sure every function name use st33zp24_spi_ prefix.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
nbr_dummy_bytes variable could be easily replaced by phy->latency in
st33zp24_spi_send and st33zp24_spi_recv.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Simplify st33zp24_spi_acpi_request_resources, st33zp24_spi_of_request_resources
and st33zp24_spi_request_resources to have the same prototype and using
spi_get_drvdata.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Simplify st33zp24_i2c_acpi_request_resources, st33zp24_i2c_of_request_resources
and st33zp24_i2c_request_resources to have the same prototype and using
i2c_get_clientdata.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add check in st33zp24_spi_evaluate_latency helping to diagnose if the chip
is present or in a bad state.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The core st33zp24 module is useless without either the I2C or the
SPI access module. So hide NFC_ST_NCI and select it automatically
if either TCG_TIS_ST33ZP24_I2C or TCG_TIS_ST33ZP24_SPI is selected.
This avoids presenting TCG_TIS_ST33ZP24 when neither TCG_TIS_ST33ZP24_I2C
nor TCG_TIS_ST33ZP24_SPI can be selected.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
DT headers already define NOOP routines when CONFIG_OF is not defined.
[jarkko.sakkinen@linux.intel.com: I tested that the driver compiles
without warnings and errors with and without CONFIG_OF flag.]
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove spi_xfer from st33zp24_spi_phy structure and declare local spi_xfer
when needed instead.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
An affectation is enough when copying 1 byte. Remove memcpy usage where
possible.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Make sure every function name use st33zp24_spi_ prefix.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
nbr_dummy_bytes variable could be easily replaced by phy->latency in
st33zp24_spi_send and st33zp24_spi_recv.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
drivers/char/tpm/tpm_tis.c:838: warning: ‘tpm_tis_resume’ defined but
not used
Reported-by: James Morris <jmorris@namei.org>
Fixes: 00194826e6 ("tpm_tis: Clean up the force=1 module parameter")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: stable@vger.kernel.org
In all cases use dev_name() for the mapped resources. This is both
for sake of consistency and also with some platforms resource name
given by ACPI object seems to return garbage.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fixes: 1bd047be37 ("tpm_crb: Use devm_ioremap_resource")
The commit 0cc698af36 ("vTPM: support little endian guests") copied
the event, but without the event data, did an endian conversion on the
size and tried to output the event data from the copied version, which
has only have one byte of the data, resulting in garbage event data.
[jarkko.sakkinen@linux.intel.com: fixed minor coding style issues and
renamed the local variable tempPtr as temp_ptr now that there is an
excuse to do this.]
Signed-off-by: Harald Hoyer <harald@redhat.com>
Fixes: 0cc698af36 ("vTPM: support little endian guests")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: stable@vger.kernel.org
Call put_device() and return error code if devm_add_action() fails.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Fixes: 8e0ee3c9fa ("tpm: fix the cleanup of struct tpm_chip")
It's better to set the continueSession attribute for the unseal
operation so that the session object is not removed as a side-effect
when the operation is successful. Since a user process created the
session, it should be also decide when the session is destroyed.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fixes: 5beb0c435b ("keys, trusted: seal with a TPM2 authorization policy")
If the initialization fails before tpm_chip_register(), put_device()
will be not called, which causes release callback not to be called.
This patch fixes the issue by adding put_device() to devres list of
the parent device.
Fixes: 313d21eeab ("tpm: device class for tpm")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Fixed the rollback and gave more self-documenting names for the
functions.
Fixes: d972b0523f ("tpm: fix call order in tpm-chip.c")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
To support the force mode in tpm_tis we need to use resource locking
in tpm_crb as well, via devm_ioremap_resource.
The light restructuring better aligns crb and tis and makes it easier
to see the that new changes make sense.
The control area and its associated buffers do not always fall in the
range of the iomem resource given by the ACPI object. This patch fixes
the issue by mapping the buffers if this is the case.
[jarkko.sakkinen@linux.intel.com: squashed update described in the
last paragraph.]
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
ioread32 and readl are defined to read from PCI style memory, ie little
endian and return the result in host order. On platforms where a
swap is required ioread32/readl do the swap internally (eg see ppc).
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
The TPM core has long assumed that every device has a driver attached,
however the force path was attaching the TPM core outside of a driver
context. This isn't generally reliable as the user could detatch the
driver using sysfs or something, but commit b8b2c7d845 ("base/platform:
assert that dev_pm_domain callbacks are called unconditionally")
forced the issue by leaving the driver pointer NULL if there is
no probe.
Rework the TPM setup to create a platform device with resources and
then allow the driver core to naturally bind and probe it through the
normal mechanisms. All this structure is needed anyhow to enable TPM
for OF environments.
Finally, since the entire flow is changing convert the init/exit to use
the modern ifdef-less coding style when possible
Reported-by: "Wilck, Martin" <martin.wilck@ts.fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
This does a request_resource under the covers which means tis holds a
lock on the memory range it is using so other drivers cannot grab it.
When doing probing it is important to ensure that other drivers are
not using the same range before tis starts touching it.
To do this flow the actual struct resource from the device right
through to devm_ioremap_resource. This ensures all the proper resource
meta-data is carried down.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
If the ACPI tables do not declare a memory resource for the TPM2
then do not just fall back to the x86 default base address.
Also be stricter when checking the ancillary TPM2 ACPI data and error
out if any of this data is wrong rather than blindly assuming TPM1.
Fixes: 399235dc6e ("tpm, tpm_tis: fix tpm_tis ACPI detection issue with TPM 2.0")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
Instead of clearing the global interrupts flag when any device
does not have an interrupt just pass -1 through tpm_info.irq.
The only thing that asks for autoprobing is the force=1 path.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
include/acpi/actbl2.h is the proper place for these definitions
and the needed TPM2 ones have been there since
commit 413d4a6def ("ACPICA: Update TPM2 ACPI table")
This also drops a couple of le32_to_cpu's for members of this table,
the existing swapping was not done consistently, and the standard
used by other Linux callers of acpi_get_table is unswapped.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
