After a somewhat quiet 5.17 release, the size of the DT changes
is a bit larger again. There are nine new SoC that get added,
all of them related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
LG Nexus 5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
along with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added all
over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)
-----BEGIN PGP SIGNATURE-----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=v98T
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
Enable the driver for the Layerscape SFP (Security Fuse Processor) found
on most Layerscape SoCs. For example, a per-device unique serial number
is stored in the fuses.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the CVP driver in the standard arm64 defconfig.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYgZfpgAKCRCKwlD9ZEnx
cM5XAP4nyb1rxKQpDWbdozSOmItkytpfC2+NTS9+Ul0mAVz98QD/YfuW1awSR8EE
6iyGVM2WqFbaKKGNEqogHI2eNGvbyAk=
=HkeI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=G8H0
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.18
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Disable unneeded 8250 serial options
arm64: defconfig: Enable Audio Graph Card2 driver
Link: https://lore.kernel.org/r/cover.1644587198.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add a new defconfig for Cortex-M based i.MXRT family.
- A series from Marcel Ziswiler to rebuild arm64 defconfig with
'savedefconfig', and then enable various relevant options needed by
Toradex verdin-imx8mm device.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmIUkysUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7+rwgAh6O4IeWd9PFgNsocVV5gjJUSr3HE
N6kODKwbd6xbVt+JA6kAUfhqaDAOO5daicnB+BIjTxnttflZXxpER10G5HBZL1qH
ACglN1NQPzz38RzfeJd/PaNqixMFsOdn4RsHbwQicX8aHUBP7MpfFh0FT50/fpgo
nYeW5itpyvcSHzTrmgXNveriVz7/UiE5i/0FSvwEjjraD2hWVFI3nZgHFtzQcVhe
KLD8Q8f1bH40wEAH4KAlWY0m5VD5jmnAkeRMlvYzWnKaG1sl2gsZlGb1w1zOrC41
lD+mU/SvcNoe4Bupn3J6BjA1MISfaKClYWbJ0iOVj3S6RUQKC8ToUxHVJA==
=ozsC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ce1L
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.18:
- Add a new defconfig for Cortex-M based i.MXRT family.
- A series from Marcel Ziswiler to rebuild arm64 defconfig with
'savedefconfig', and then enable various relevant options needed by
Toradex verdin-imx8mm device.
* tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable verdin-imx8mm relevant drivers as modules
arm64: defconfig: build r8169 as a module
arm64: defconfig: build imx-sdma as a module
arm64: defconfig: enable imx8m pcie phy driver
arm64: defconfig: enable bpf/cgroup firewalling
arm64: defconfig: rebuild default configuration
arm64: defconfig: re-order default configuration
arm64: defconfig: enable pcieaer configuration
arm64: defconfig: enable taskstats configuration
ARM: imxrt_defconfig: Add i.MXRT family defconfig
Link: https://lore.kernel.org/r/20220222075226.160187-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable drivers for USB and SERDES IPs on TI K3 SoC
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmHEEI0QHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW4+qvB/9bn7oXiHF0tdkgeFu1naq0gIBXbcbH6xxU
O9EAbRlVn3NC6XApDx/KuKaIHtogjV4n+PkLaStLcyBd3SYEB2k/VvnKI0IFlhPG
L8u+t6O5/pNUK9MZzT6+VsY67CAOHjdy/kU83UboD4EsgXn2NS0EosGTQFs/RCVt
0LQONv5+6Tu8UaBg0tt3r6Q6THMcSsLzqCVfMZgehhCOJmk1yQ/7VeiFZtJr0RX5
M1G+IWYhgaWNpzO3AAxkM3iWXo3xL7vDi8eNhMX1nSLygfkQ4TSyoYHxo32VfoWH
U9js6HwDj7+KaPDfvGlkGW/4vjGgPiFN/iJXTGEeFZdap41jc9aN
=L/gY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OX1P
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/defconfig
ARM64 defconfig changes for TI K3 platforms for v5.17 merge window:
- Enable drivers for USB and SERDES IPs on TI K3 SoC
* tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable USB controller drivers for TI K3 SoC
Link: https://lore.kernel.org/r/20211223094040.15349-1-vigneshr@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable various drivers which support peripherals as found on the
Verdin iMX8M Mini et al. computer/system on modules:
- CONFIG_CAN_MCP251XFD
At least one Microchip MCP2518FDT SPI CAN controller which this driver
also supports may be found on the Verdin iMX8M Mini computer/system on
module.
- CONFIG_BT_HCIUART_MRVL, CONFIG_BT_MRVL, CONFIG_BT_MRVL_SDIO and
CONFIG_MWIFIEX_SDIO
The AzureWave AW-CM276NF which these Bluetooth and Wi-Fi drivers also
support may be found on the Verdin iMX8M Mini (as well as the Apalis
iMX8, Colibri iMX8X and Verdin iMX8M Plus for that matter) computer/
system on module.
- CONFIG_SENSORS_LM75
The TI TMP75C temperature sensor which this driver also supports may be
found on the Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for
that matter) computer/system on module.
- CONFIG_SND_SOC_NAU8822
The Nuvoton Technology Corporation (NTC) NAU88C22YG which this driver
also supports may be found on the Verdin Development Board a carrier
board for the Verdin family of computer/system on module which the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
may be mated in.
- CONFIG_TI_ADS1015
The TLA2024 ADC which this driver also supports may be found on the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
computer/system on module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Build Realtek Gigabit Ethernet driver as a module.
Network cards based on chipsets this driver supports are ubiquitous both
in regular PCIe as well as mini-PCIe and nowadays even various M.2
formats. It is therefore a suitable card to be used for any kind of PCIe
and/or Gigabit Ethernet testing. As it is not designed in, just enabling
it as a module seems most suitable.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This avoids the following systemd warning:
[ 2.618538] systemd[1]: system-getty.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
[ 2.630916] systemd[1]: (This warning is only shown for the first
unit using IP firewalling.)
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make defconfig; make savedefconfig" to rebuild defconfig.
This dropped the following configuration options which are nowaday's
already enabled (resp. disabled) by default:
CONFIG_MEMCG_SWAP=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_FSL_MC_BUS=y
CONFIG_QCOM_SCM=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_XHCI_PCI=m
CONFIG_SDM_GCC_845=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_POWER_AVS was renamed to POWER_AVS_OMAP in commit bca815d620
("PM: AVS: smartreflex Move driver to soc specific drivers"). As there
are no 64-bit Arm OMAPs it getting dropped seems fair.
Note that the following user-selectable configuration options have been
preserved:
CONFIG_SECCOMP=y
CONFIG_SLIMBUS=m
CONFIG_INTERCONNECT=y
CONFIG_CONFIGFS_FS=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_PCIEAER which is required for CONFIG_ACPI_APEI_PCIEAER.
Commit 8c8ff55b4d ("PCI/AER: Don't select CONFIG_PCIEAER by default")
changed it to no longer being enabled by default.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_TASKSTATS which is required for CONFIG_TASK_XACCT (and
subsequently CONFIG_TASK_IO_ACCOUNTING). Previously, taskstats got
pulled in by KVM but that got changed in commit 63b3f96e1a
("kvm: Select SCHED_INFO instead of TASK_DELAY_ACCT").
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Renesas RSPI, RZ/G2L thermal, RZ/G2L WDT watchdog, and OSTM timer,
as used on the RZ/G2L SMARC EVK board,
- R-Car Image Signal Processor (ISP) and Display Unit embedded MIPI
DSI encoder on R-Car V3U, as used on the Falcon board.
All of the above are modular, except for thermal, watchdog, and timer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c9800d67f91a90d418a3ce44c59109ae0a87b2d8.1643373223.git.geert+renesas@glider.be
Enable the following drivers as modular:
- NAND controller with CONFIG_MTD_NAND_BRCMNAND
- AHCI/SATA controller driver with CONFIG_AHCI_BRCM
- Starfighter 2 Ethernet switch driver with CONFIG_NET_DSA_BCM_SF2
- USB drivers (OHCI, EHCI, XHCI) with CONFIG_USB_BRCMSTB
- Watchdog with CONFIG_BCM7038_WDT
- PWM with CONFIG_PWM_BRCMSTB
- SYSTEMPORT Ethernet controller with CONFIG_SYSTEMPORT
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The MediaTek CPUFreq driver provides control of CPU frequency/voltage
on MediaTek SoCs. Since there's no device-tree node to bind it to, the
driver needs to be enabled built-in. Enable it so.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20211217154452.868419-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The MT6397 RTC is part of the Mediatek MT6397 PMIC, which is present in
the mt8173-elm base board.
The driver for the PMIC is already enabled through CONFIG_MFD_MT6397, so
enable just the driver for the RTC.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20211217162445.876034-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable Cadence USB, TI USB and required SERDES drivers to support USB on
TI K3 SoCs.
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/r/20211221152140.15151-1-vigneshr@ti.com
Add the SM8450 GCC config as built-in so that platform can boot to shell
with defconfig
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216065444.650357-2-vkoul@kernel.org
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9iKYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Giwf+OjKD1fwYzsSRFVyY5m+Vn1iZANCi
sXb5mVQks435oeBV44O5AEsaTLb+qQEyFQZBL6IdbIlPm+LwHu2GYTn2F84bilww
vO7mVbIpeh7bInD3eELWdrE6BdhcsenlLi3Tg0oeMQ7HAk4FT7GzcWk2laVemOnU
RoWjTn0S97Bh4aWfGEg22c+wfh1Egp6rLmHxaXCUJDrCexyA4CLZ6+r/ZgFUlb2q
FbdmPyjPnasiyM1RsY+hWY6dELl8xJwNg8hCA1DBddDsDLj8gMYXvZmR3oYHOG/1
/6Z4y6gbJ7NK9h4xPvjJ/XCdlXaEpZAIwr3OB+aEpCIXHNTaTzQL3v240A==
=BPLr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rJsW
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.17:
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
* tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
arm64: defconfig: enable drivers for booting i.MX8ULP
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
arm64: defconfig: Enable OV5640
arm64: defconfig: Enable VIDEO_IMX_MEDIA
Link: https://lore.kernel.org/r/20211218071427.26745-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the device tree in place, enable missing drivers as modules, if
possible. PHY driver needs built-in for interrupt support.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon EmbeddedWorks imx8mm development kit has a TD Next 5640
Camera. Enable the OV5640 driver to use the camera.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To use a camera, the CSIS and CSI drivers need to be enabled with
VIDEO_IMX_MEDIA.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
-----BEGIN PGP SIGNATURE-----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=xuCz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DfL5
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfigs
Qualcomm ARM64 defconfig updates for v5.16
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
* tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm LMH driver
arm64: defconfig: Enable Qualcomm prima/pronto drivers
arm64: defconfig: Enable Sleep stats driver
arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnect
arm64: defconfig: Disable firmware sysfs fallback
Link: https://lore.kernel.org/r/20211026134953.1204327-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom:
sdm845: Add support for LMh node")' the CPUfreq gained a reference for
the two interrupts from the LMh. This means that if the LMh driver isn't
enabled CPUfreq will not probe and there's no frequency scaling.
Enable LMh to make CPUfreq functional again on SDM845.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211017204036.2761122-1-bjorn.andersson@linaro.org
The Qualcomm prima/pronto drivers consists of a remoteproc driver boot
the combined WiFi and Bluetooth firmware on the related co-processor, a
control driver to load calibration and settings firmware, the wcn36xx
WiFi driver and the SMD based Bluetooth driver.
Enable these in the defconfig to provide Bluetooth and WiFi on devices
such as the Qualcomm Dragonboard 410c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211008192840.3593362-1-bjorn.andersson@linaro.org
Enable the QTI SC7280 pinctrl, gcc and interconnect drivers required
for kernel to boot to console.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007052812.3717-1-quic_saipraka@quicinc.com
Part of the enablement of SDMA on the IMX platforms, '7f4e4afa140c
("arm64: defconfig: Enable SDMA on i.mx8mq/8mm")' also enabled
CONFIG_FW_LOADER_USER_HELPER_FALLBACK, to allow "firmware loaded by
udev".
Unfortunately having the fallback enabled does, due to the 60 second
timeout, essentially requiring userspace to provide a firmware loader.
But systemd dropped the support for this interface back in 2014 and
because arm64 is the only architecture that has this enabled, there
doesn't seem to be any standard solution available.
Examples of this problem can be found in e.g. the ath10k driver, which
with a standard distro can take about 10 minutes before wlan0 appears.
The alternative to this patch would be to change these drivers to use
firmware_request_direct(), to avoid the sysfs fallback. But that would
prevent other systems, such as Android, to rely on a userspace firmware
loader to pick the firmware from a non-standard place, with just a
custom defconfig.
This patch therefor attempts to align the arm64 defconfig will all other
architectures in the upstream kernel.
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210930215300.60290-1-bjorn.andersson@linaro.org
This enables drivers for the various audio processors found on Tegra210
and later.
-----BEGIN PGP SIGNATURE-----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=v2qB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7sxf
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfigs
arm64: tegra: Default configuration changes for v5.16-rc1
This enables drivers for the various audio processors found on Tegra210
and later.
* tag 'tegra-for-5.16-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable few Tegra210 based AHUB drivers
Link: https://lore.kernel.org/r/20211008201132.1678814-8-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable configs for following modules:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These configs are used on Tegra186 and later SoCs as well.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
