Add the relevant GAUDI ASIC registers header files. These files are
generated automatically from a tool maintained by the VLSI engineers.
There are more files which are not upstreamed because only very few defines
from those files are used in the driver. For those files, we copied the
relevant defines into gaudi_regs.h and gaudi_masks.h, to reduce the size of
this patch.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For Gaudi the driver gets two new additional properties from the F/W:
1. The card's type - PCI or PMC
2. The card's location in the Gaudi's box (relevant only for PMC).
The card's location is also passed to the user in the HW IP info structure
as it needs this property for establishing communication between Gaudis.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Update the mapping to the latest one used by the Firmware. No impact on the
driver in this update.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Load CPU device boot loader during driver boot time in order to avoid flash
write for every boot loader update.
To preserve backward-compatibility, skip the device boot load if the device
doesn't request it.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add a new opcode to the INFO IOCTL that retrieves the device time
alongside the host time, to allow a user application that want to measure
device time together with host time (such as a profiler) to synchronize
these times.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Retrieve from the firmware the DMA mask value we need to set according to
the device's PCI controller configuration. This is needed when working on
POWER9 machines, as the device's PCI controller is configured in a
different way in those machines.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add comments for the various errors and states of the firmware during boot.
Add a mapping of a new register that will tell the driver whether the
firmware executed the request from the driver or if it has encountered an
error.
Add a new enum for the possible values of this register.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Move the code of device CPU initialization from being ASIC-Dependent to
common code. In addition, add support for the new error reporting feature
of the firmware boot code.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Stop-on-error mode in DMA is useful as it stops the transaction
immediately upon error e.g. page fault.
But it may cause the next command submission to fail as is leaves the DMA
in unstable state.
Therefore we remove the stop-on-error configuration from the DMA.
Stop-on-err is still available for debug.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add print upon clock slow down due to power consumption or overheating.
In addition, add print when back to optimal clock.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add support for hwmon_in_highest, hwmon_temp_highest and hwmon_curr_highest
attributes. These attributes retrieve the historical maximum voltage,
temperature and current that were sampled, respectively.
Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit adds support for offsetting the temperatures reading
by a specified value as defined in
https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
using the standard sysfs defined for hwmon.
This is required by system administrators to inject errors to test
their monitoring applications in data centers.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Split the properties used for MMU mappings to DRAM and PCI (host) types.
This is a prerequisite for future ASICs support.
Note that in Goya ASIC, the PMMU and DMMU are the same (except of page
sizes) as only one MMU mechanism is used for both of the mapping types.
Hence this patch should not have any effect on current behavior.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some cosmetics around the MMU code to make it more self-explanatory.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
ETR should always be non-secured as it is used by the users to record
profiling/trace data.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
We have a single ETR block in the SOC, so use explicit register
name defines for initializing this block. This makes it more readable and
maintainable.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
This patch adds a support for a new H/W queue type.
This type of queue is for DMA and compute engines jobs, for which
completion notification are sent by H/W.
Command buffer for this queue can be created either through the CB
IOCTL and using the retrieved CB handle, or by preparing a buffer on the
host or device SRAM/DRAM, and using the device address to that buffer.
The patch includes the handling of the 2 options, as well as the
initialization of the H/W queue and its jobs scheduling.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In case the F/W fails to initialize the thermal sensors, print an
appropriate error message to kernel log and fail the device
initialization.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We want to stop using the acronym KMD. Therefore, replace all locations
(except for register names we can't modify) where KMD is written to other
terms such as "Linux kernel driver" or "Host kernel driver", etc.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
To allow the user to use a custom file for the HWMON lm-sensors library
per card type, the driver needs to register the HWMON sensors with the
specific card type name.
The card name is supplied by the F/W running on the device. If the F/W is
old and doesn't supply a card name, a default card name is displayed as
the sensors group name.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Users and sysadmins usually want to know what is the device utilization as
a level 0 indication if they are efficiently using the device.
Add a new opcode to the INFO IOCTL that will return the device utilization
over the last period of 100-1000ms. The return value is 0-100,
representing as percentage the total utilization rate.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Add a meaningful name to the general PSOC application status register
which better describes its usage in keeping the HW state.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The PSOC scratch-pad registers are used for communication with the
device CPU. This patch adds new definitions for these registers which
are more descriptive than their general names.
The new set of definitions also gathers and documents the current usage
of the scratch-pad registers by the driver and the device CPU.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Packets that arrive from the user and need to be parsed by the driver are
assumed to be in LE format.
This patch fix all the places where the code handles these packets and use
the correct endianness macros to handle them, as the driver handles the
packets in CPU format (LE or BE depending on the arch).
Signed-off-by: Ben Segal <bpsegal20@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The patch updates the device idle check:
- Add reading the DMA core status register, because it is possible that
a QMAN has finished its work but the DMA itself is still running.
- Remove the MME shadow status check, as the MME ARCH status register
includes the status of all MME shadows.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The device's CPU accessible memory on host is managed in a dedicated
pool, except for 2 regions - Primary Queue (PQ) and Event Queue (EQ) -
which are allocated from generic DMA pools.
Due to address length limitations of the CPU, the addresses of all these
memory regions must have the same MSBs starting at bit 40.
This patch modifies the allocation of the PQ and EQ to be also from the
dedicated pool, to ensure compliance with the limitation.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the ASIC-specific function for GOYA to configure the
coresight components.
Most of the components have an enabled/disabled flag, depending on whether
the user wants to enable the component or disable it.
For some of the components, such as ETR and SPMU, the user can also
request to read values from them. Those values are needed for the user to
parse the trace data.
The ETR configuration is also checked for security purposes, to make sure
the trace data is written to the device's DRAM.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
GIT does not like extra blank lines at the end of the file, so this patch
removes those lines.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
This patch adds shadow mapping to the MMU module. The shadow mapping
allows traversing the page table in host memory rather reading each PTE
from the device memory.
It brings better performance and avoids reading from invalid device
address upon PCI errors.
Only at the end of map/unmap flow, writings to the device are performed in
order to sync the H/W page tables with the shadow ones.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Move duplicated PCI-related code from ASIC-specific files into the common
pci.c file.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The Event Queue MSI/X ID is different per ASIC. This patch renames the
current define to have the GOYA_ prefix to mark it only for Goya. It also
moves it from the common armcp_if.h file to the ASIC specific goya_fw_if.h
file.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch moves the code that is responsible of the communication
vs. the F/W to a dedicated file. This will allow us to share the code
between different ASICs.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This will prevent unneeded include of header files, which may increase
compilation time.
Signed-off-by: Dotan Barak <dbarak@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The goya_non_fatal_events array actually contains all the possible events
the driver can receive from the F/W. Therefore, use a proper name
for the array.
The patch also adds missing event Ids to the goya_async_event_id enum.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds a definition of a new status in the device CPU boot stages
and add the handling of the new status.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch fix a bug where DMA channel 0 completion address wasn't
initialized by the driver.
The patch sets the address to Sync Object no. 1007
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch provides a workaround for a H/W bug in Goya, where access to
RAZWI from TPC can cause PCI completion timeout.
The WA is to use the device MMU to map any unmapped DRAM memory to a
default page in the DRAM. That way, the TPC will never reach RAZWI upon
accessing a bad address in the DRAM.
When a DRAM page is mapped by the user, its default mapping is
overwritten. Once that page is unmapped, the MMU driver will map that page
to the default page.
To help debugging, the driver will set the default page area to 0x99 on
device initialization.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the Virtual Memory and MMU modules.
Goya has an internal MMU which provides process isolation on the internal
DDR. The internal MMU also performs translations for transactions that go
from Goya to the Host.
The driver is responsible for allocating and freeing memory on the DDR
upon user request. It also provides an interface to map and unmap DDR and
Host memory to the device address space.
The MMU in Goya supports 3-level and 4-level page tables. With 3-level, the
size of each page is 2MB, while with 4-level the size of each page is 4KB.
In the DDR, the physical pages are always 2MB.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for receiving events from Goya's control CPU and
for receiving MSI-X interrupts from Goya's DMA engines and CPU.
Goya's PCI controller supports up to 8 MSI-X interrupts, which only 6 of
them are currently used. The first 5 interrupts are dedicated for Goya's
DMA engine queues. The 6th interrupt is dedicated for Goya's control CPU.
The DMA queue will signal its MSI-X entry upon each completion of a command
buffer that was placed on its primary queue. The driver will then mark that
CB as completed and free the related resources. It will also update the
command submission object which that CB belongs to.
There is a dedicated event queue (EQ) between the driver and Goya's control
CPU. The EQ is located on the Host memory. The control CPU writes a new
entry to the EQ for various reasons, such as ECC error, MMU page fault, Hot
temperature. After writing the new entry to the EQ, the control CPU will
trigger its dedicated MSI-X entry to signal the driver that there is a new
entry in the EQ. The driver will then read the entry and act accordingly.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the H/W queues module and the code to initialize Goya's
various compute and DMA engines and their queues.
Goya has 5 DMA channels, 8 TPC engines and a single MME engine. For each
channel/engine, there is a H/W queue logic which is used to pass commands
from the user to the H/W. That logic is called QMAN.
There are two types of QMANs: external and internal. The DMA QMANs are
considered external while the TPC and MME QMANs are considered internal.
For each external queue there is a completion queue, which is located on
the Host memory.
The differences between external and internal QMANs are:
1. The location of the queue's memory. External QMANs are located on the
Host memory while internal QMANs are located on the on-chip memory.
2. The external QMAN write an entry to a completion queue and sends an
MSI-X interrupt upon completion of a command buffer that was given to
it. The internal QMAN doesn't do that.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the basic part of Goya's H/W initialization. It adds code
that initializes Goya's internal CPU, various registers that are related to
internal routing, scrambling, workarounds for H/W bugs, etc.
It also initializes Goya's security scheme that prevents the user from
abusing Goya to steal data from the host, crash the host, change
Goya's F/W, etc.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a basic support for the Goya device. The code initializes
the device's PCI controller and PCI bars. It also initializes various S/W
structures and adds some basic helper functions.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch just adds a lot of header files that contain description of
Goya's registers.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
