Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Fixes: 37564ed834 ("s390/uv: add prot virt guest/host indication files")
Link: https://lore.kernel.org/r/2f7d62a4-3e75-b2b4-951b-75ef8ef59d16@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
prot_virt_host is only available if CONFIG_KVM is enabled. So lets use
a variable initialized to zero and overwrite it when that config
option is set with prot_virt_host.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: 37564ed834 ("s390/uv: add prot virt guest/host indication files")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let's export the prot_virt_guest and prot_virt_host variables into the
UV sysfs firmware interface to make them easily consumable by
administrators.
prot_virt_host being 1 indicates that we did the UV
initialization (opt-in)
prot_virt_guest being 1 indicates that the UV indicates the share and
unshare ultravisor calls which is an indication that we are running as
a protected guest.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The number reported by the query is N-1 and I think people reading the
sysfs file would expect N instead. For users creating VMs there's no
actual difference because KVM's limit is currently below the UV's
limit.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a0f60f8431 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Cc: stable@vger.kernel.org
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Older firmware can return rc=0x107 rrc=0xd for destroy page if the
page is already non-secure. This should be handled like a success
as already done by newer firmware.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 1a80b54d1c ("s390/uv: add destroy page call")
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Currently the kernel crashes in Kasan instrumentation code if
CONFIG_KASAN_S390_4_LEVEL_PAGING is used on protected virtualization
capable machine where the ultravisor imposes addressing limitations on
the host and those limitations are lower then KASAN_SHADOW_OFFSET.
The problem is that Kasan has to know in advance where vmalloc/modules
areas would be. With protected virtualization enabled vmalloc/modules
areas are moved down to the ultravisor secure storage limit while kasan
still expects them at the very end of 4-level paging address space.
To fix that make Kasan recognize when protected virtualization is enabled
and predefine vmalloc/modules areas position which are compliant with
ultravisor secure storage limit.
Kasan shadow itself stays in place and might reside above that ultravisor
secure storage limit.
One slight difference compaired to a kernel without Kasan enabled is that
vmalloc/modules areas position is not reverted to default if ultravisor
initialization fails. It would still be below the ultravisor secure
storage limit.
Kernel layout with kasan, 4-level paging and protected virtualization
enabled (ultravisor secure storage limit is at 0x0000800000000000):
---[ vmemmap Area Start ]---
0x0000400000000000-0x0000400080000000
---[ vmemmap Area End ]---
---[ vmalloc Area Start ]---
0x00007fe000000000-0x00007fff80000000
---[ vmalloc Area End ]---
---[ Modules Area Start ]---
0x00007fff80000000-0x0000800000000000
---[ Modules Area End ]---
---[ Kasan Shadow Start ]---
0x0018000000000000-0x001c000000000000
---[ Kasan Shadow End ]---
0x001c000000000000-0x0020000000000000 1P PGD I
Kernel layout with kasan, 4-level paging and protected virtualization
disabled/unsupported:
---[ vmemmap Area Start ]---
0x0000400000000000-0x0000400060000000
---[ vmemmap Area End ]---
---[ Kasan Shadow Start ]---
0x0018000000000000-0x001c000000000000
---[ Kasan Shadow End ]---
---[ vmalloc Area Start ]---
0x001fffe000000000-0x001fffff80000000
---[ vmalloc Area End ]---
---[ Modules Area Start ]---
0x001fffff80000000-0x0020000000000000
---[ Modules Area End ]---
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Avoid potential crash due to lack of secure storage limit. Check that
max_sec_stor_addr is not 0 before adjusting vmalloc position.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To make early kernel address space layout definition possible parse
prot_virt option in the decompressor and pass it to the uncompressed
kernel. This enables kasan to take ultravisor secure storage limit into
consideration and pre-define vmalloc position correctly.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We don't need to export pages if we destroy the VM configuration
afterwards anyway. Instead we can destroy the page which will zero it
and then make it accessible to the host.
Destroying is about twice as fast as the export.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/kvm/20200907124700.10374-2-frankja@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
snprintf() returns the number of bytes that would be written,
which may be greater than the the actual length to be written.
uv_query_facilities() should return the number of bytes printed
into the buffer. This is the return value of scnprintf().
The other functions are the same.
Link: https://lkml.kernel.org/r/20200509085608.41061-4-chenzhou10@huawei.com
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The kernel fails to compile with CONFIG_PROTECTED_VIRTUALIZATION_GUEST
set but CONFIG_KVM unset.
This patch fixes the issue by making the needed variable always available.
Link: https://lkml.kernel.org/r/20200423120114.2027410-1-imbrenda@linux.ibm.com
Fixes: a0f60f8431 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Philipp Rudo <prudo@linux.ibm.com>
Suggested-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
That information, e.g. the maximum number of guests or installed
Ultravisor facilities, is interesting for QEMU, Libvirt and
administrators.
Let's provide an easily parsable API to get that information.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This provides the basic ultravisor calls and page table handling to cope
with secure guests:
- provide arch_make_page_accessible
- make pages accessible after unmapping of secure guests
- provide the ultravisor commands convert to/from secure
- provide the ultravisor commands pin/unpin shared
- provide callbacks to make pages secure (inacccessible)
- we check for the expected pin count to only make pages secure if the
host is not accessing them
- we fence hugetlbfs for secure pages
- add missing radix-tree include into gmap.h
The basic idea is that a page can have 3 states: secure, normal or
shared. The hypervisor can call into a firmware function called
ultravisor that allows to change the state of a page: convert from/to
secure. The convert from secure will encrypt the page and make it
available to the host and host I/O. The convert to secure will remove
the host capability to access this page.
The design is that on convert to secure we will wait until writeback and
page refs are indicating no host usage. At the same time the convert
from secure (export to host) will be called in common code when the
refcount or the writeback bit is already set. This avoids races between
convert from and to secure.
Then there is also the concept of shared pages. Those are kind of secure
where the host can still access those pages. We need to be notified when
the guest "unshares" such a page, basically doing a convert to secure by
then. There is a call "pin shared page" that we use instead of convert
from secure when possible.
We do use PG_arch_1 as an optimization to minimize the convert from
secure/pin shared.
Several comments have been added in the code to explain the logic in
the relevant places.
Co-developed-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Before being able to host protected virtual machines, donate some of
the memory to the ultravisor. Besides that the ultravisor might impose
addressing limitations for memory used to back protected VM storage. Treat
that limit as protected virtualization host's virtual memory limit.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add "prot_virt" command line option which controls if the kernel
protected VMs support is enabled at early boot time. This has to be
done early, because it needs large amounts of memory and will disable
some features like STP time sync for the lpar.
Extend ultravisor info definitions and expose it via uv_info struct
filled in during startup.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
