The reset flags used by the reset thread are currently a mix of
hard-coded values and a specific flag which is passed from the context
that initiates the reset.
To make it easier to pass more flags in future from this context to the
reset thread, modify it to pass all the original reset flags to the
thread.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because info ioctl is used to retrieve data, some of its opcodes may be
used during hard reset.
Other ioctls should be blocked while device is not operational.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For debug purpose, add SOB address and SOB initial counter value
before current submission to uAPI output.
Using SOB address and initial counter, user can calculate how much of
the submmision has been completed.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reporting FW errors involves reading of the error registers.
In case we have a corrupted FW descriptor we cannot do that since the
dynamic scratchpad is potentially corrupted as well and may cause kernel
crush when attempting access to a corrupted register offset.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver should handle events during soft-reset as F/W is not
going through reset and it keeps sending events towards host.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently we dump the physical IRQ line index in host if an event
is received during reset. This ID is confusing as it means nothing
to the user.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In new f/w versions, it is required to explicitly indicate the power
information type when querying the F/W for power info.
When getting the current power level it should be set to power_input.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some info ioctls can be served even if the device is disabled or
in reset. Hence, we enable more info ioctls during reset, as these
ioctls do not require any H/W nor F/W communication.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Race example scenario:
1. User have 2 threads that waits on multi CS:
- thread_0 waits on QID 0 and uses multi CS context 0.
- thread_1 waits on QID 1 and uses multi CS context 1.
2. thread_1 got completion and release multi CS context 1.
3. CS related to multi CS of thread_0 starts executing
complete_multi_cs function, the first iteration of the loop
completes the multi CS of thread_0, hence multi CS context 0
is released.
4. thread_1 waits on QID 1 and uses multi CS context 0.
5. thread_0 waits on QID 0 and uses multi CS context 1.
6. The second iterattion of the loop (from step 3) starts, which
means, start checking multi CS context 1:
- multi CS contetxt is being used by thread_0 waiting on QID 0.
- The fence of the CS (still CS from step 3) has QID map the same
as the multi CS context 1.
- multi CS context 1 (thread_0) gets completion on CS that triggered
already thread_0 (with multi CS context 0) and is no longer
being waited on.
Fixed by exiting the loop in complete_multi_cs after getting completion
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As device boot warnings clears the indication from the error mask,
they must be located together before the unknown error validation.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
GAUDI supports only hard-reset. Therefore, this function should
return an error of operation not permitted.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The ASIC-specific soft_reset_late_init() is now called after either
soft-reset or reset-upon-device-release. Therefore, it needs a more
appropriate name.
No need to split it to two functions, as an ASIC either supports
soft-reset or reset-upon-device-release.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reset upon device release is not a soft-reset from user/system point
of view. As such, we shouldn't count that reset in the statistics we
gather and expose to the monitoring applications.
We also shouldn't print soft-reset when doing the reset upon device
release.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Changing the frequency automatically is only done in Goya. In future
ASICs this is done inside the firmware. Therefore, move the common code
into the Goya specific files.
Main changes as part of the commit are:
1. The thread for setting frequency is moved from device_late_init
to goya_late_init
2. hl_device_set_frequency is removed from hl_device_open as it is
not relevant for other ASICs and for Goya it is taken care by
the thread
3. hl_device_set_frequency is renamed as goya_set_frequency
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Hard-reset is mutually exclusive with reset-on-device-release.
Therefore, if such a request arrives to the reset function, abort
the reset and return an error to the callee.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently there is a deadlock in driver in scenarios where MMU
cache invalidation fails. The issue is basically device reset
being performed without releasing the MMU mutex.
The solution is to skip device reset as it is not necessary.
In addition we introduce a slight code refactor that prints the
invalidation error from a single location.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Getting the used PLL index with which to send the CPUPU packet relies on
the CPUCP info packet.
In case CPU queues are not enabled getting the PLL index will issue an
error and in some ASICs will also fail the driver load.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If a device reset has started, there is a chance that the heartbeat
function will fail because the device is disabled at the beginning
of the reset function.
In that case, we don't want the error message to appear in the log.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
A new uAPI is added for debug purposes of the user-space to retrieve
errors related data from previous session (before device reset was
performed).
Inforamtion is filled when a razwi or CS timeout happens and can
contain one of the following:
1. Retrieve timestamp of last time the device was opened and razwi or
CS timeout happened.
2. Retrieve information about last CS timeout.
3. Retrieve information about last razwi error.
This information doesn't contain user data, so no danger of data
leakage between users.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
AS TPM error indication is not fatal, driver should dump a warning
and continue booting.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
I2C debugfs support is limited to 1 byte. We extend functionality
to more than 1 byte by using one of the pad fields as a length.
No backward compatibility issues as new F/W versions will treat 0
length as a 1 byte length transaction.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Divide the code into 3 different parts:
- Copy kernel parameters
- Setting device behaivor per asic
- Fixup of various device parameters according to the device behaivor.
In addition, remove non-relevant code for upstream (simulator support).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add implementation for new opcodes in the INFO IOCTL:
1. Retrieve the replaced DRAM rows from f/w.
2. Retrieve the pending DRAM rows from f/w.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Refactor the wait-for-user-interrupt routine to make it more
generic for re-use for other user exposed h/w interfaces in future
ASICs.
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In Signaling-From-Graph case, the driver didn't set the hw_sob pointer
at the right place, which is needed for the cs completion
check prior to start sending all the master/slaves jobs to device.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In addition to the clock throttling reason, user should be able
to obtain also the start time and the duration of the throttling
event.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to increase maximum wait-for-interrupt timeout, change it
to 64 bit variable. This wait is used only by newer ASICs, so no
problem in changing this interface at this time.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
CPUCP_PACKET_POWER_GET packet type was used for both
hl_get_power() and hl_set_power().
To align with other sensor functions hl_set_power()
should use CPUCP_PACKET_POWER_SET.
This packet will only be used with newer ASICs, so need to add
a compatibility flag to the asic properties to indicate whether to use
this packet or the GET packet.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case of device reset, the driver does a force trigger on all waiting
users to release them from waiting. However, the driver does not handle
error scenario while waiting.
hl_interrupt_wait_ioctl() now exits the wait in case of an error with
abort status.
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once we read indication of whether f/w is doing the reset, we don't
want to clear it, until the next time we read this indication.
Otherwise, we might be in a state of wrong indication.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Using a variable poll interval for fw loading allows us to support
much slower environments (emulation) while changing only a single
line in the code, instead of choosing a different interval in each
function that polls.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Up until now the driver stored indication if Linux was loaded on the
device CPU. This was needed in order to coordinate some tasks that are
performed by the Linux.
In future ASICs, many of those tasks will be performed by the boot
fit, so now we need the same indication of boot fit load status.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The PCI MMU cache is two layered. The upper layer, memcache, uses cache
lines, the bottom layer doesn't.
Hence, after PMMU map operation we have to invalidate memcache, to avoid
the situation where the new entry is already in the cache due to its
cache line being fully in the cache.
However, we do not have to invalidate the lower cache, and here we can
optimize, since cache invalidation is time consuming.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The enum vm_type was abused, used once as a value (indication
memory type for map) and once as a flag (for cache invalidation).
This makes it hard to add new and still keep it meaningful, hence it
is better to split into one enum for values and one for flags.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently LAST_MASK is a global, but really it is an MMU implementation
specific. We need this change for future ASICs.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
VA blocks are currently stored in an inconsistent way. Sometimes block
end is inclusive, sometimes exclusive. This leads to wrong size
calculations in certain cases, plus could lead to a segmentation fault
in case mapping process fails in the middle and we try to roll it back.
Need to make this consistent - start inclusive till end inclusive.
For example, the regions table may now look like this:
0x0000 - 0x1fff : allocated
0x2000 - 0x2fff : free
0x3000 - 0x3fff : allocated
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Do not use a dma channel for debugfs requested transfer if it's
QM is not idle.
Signed-off-by: Guy Zadicario <gzadicario@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The boot status flag "SRAM available" can be set by f/w Linux (in the
general case) or by f/w uboot (in some specific debug scenario) but
never by f/w preboot.
Hence, when polling the boot status flags in the preboot stage we do not
want to poll on "SRAM Avialable".
The special case in which uboot set this flag is when we are running
special debug scenario without Linux. In this case, at some point during
the boot, the uboot relocates its code to the DRAM and then set the
specified flag.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
VA range info could assist in debugging VA allocation bugs.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are rare cases where the device CPU's watchdog has expired and as
a result, the watchdog reset has happened and the CPU will now move to
running its preboot f/w.
When that happens, the driver will only know that a heartbeat failure
occurred. As a result, the driver will send a message to the CPU's main
f/w asking it to reset the device, but because the CPU is now running
preboot, it won't respond and the re-initialization process will later
fail when trying to load the f/w.
The solution is to send the request to the preboot as well, only if the
reset was caused because of HB failure.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the dynamic FW load protocol the boot status is updated to
"Ready to Boot" once uboot is active.
Polling on other boot status values is a residue of code duplication
from the static protocol and should be removed.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Return value from ocxl_context_attach() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211215060438.441918-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of invoking a synchronize_rcu() to free a pointer
after a grace period we can directly make use of new API
that does the same but in more efficient way.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lore.kernel.org/r/20211215111845.2514-6-urezki@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the sysfs_emit to replace sprintf. sprintf may cause
output defect in sysfs content, it is better to use new
added sysfs_emit function which knows the size of the
temporary buffer.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Link: https://lore.kernel.org/r/20211206104724.11559-1-yekai13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return value from ocxl_context_attach() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211215060438.441918-1-chi.minghao@zte.com.cn
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
-----BEGIN PGP SIGNATURE-----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=JLZP
-----END PGP SIGNATURE-----
Merge tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next
Kees writes:
lkdtm updates for v5.17-rc1
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
* tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftest/lkdtm: Skip stack-entropy test if lkdtm is not available
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
lkdtm: avoid printk() in recursive_loop()
lkdtm: Note that lkdtm_kernel_info should be removed in the future
On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA
test leads to "Illegal instruction" failure.
Looking at the content of rodata_objcopy.o, we see that the
function content zeroes only:
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 00 00 00 00 .long 0x0
Add the contents flag in order to keep the content of the section
while renaming it.
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 4e 80 00 20 blr
Fixes: e9e08a0738 ("lkdtm: support llvm-objcopy")
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu
The recursive_loop() function is intended as a diagnostic to ensure that
exhausting the stack is caught and mitigated. Currently, it uses
pr_info() to ensure that the function has side effects that the compiler
cannot simply optimize away, so that the stack footprint does not get
reduced inadvertently.
The typical mitigation for stack overflow is to kill the task, and this
overflow may occur inside the call to pr_info(), which means it could be
holding the console lock when this happens. This means that the console
lock is never going to be released again, preventing the diagnostic
prints related to the stack overflow handling from being visible on the
console.
So let's replace the call to pr_info() with a call to
memzero_explicit(), which is not a 'magic' function name like memset()
or memcpy(), which the compiler may replace with plain loads and stores.
To ensure that the stack frames are nested rather than tail-called, put
the call to memzero_explicit() after the recursive call.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211007081235.382697-1-ardb@kernel.org
Microchip EEPROM 24xx1025 is like a 24c1024. The only difference
between them is that the I2C address bit used to select between the
two banks is bit 2 for the 1025 and not bit 0 as in the 1024.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
We need the fixes in here as well, and also resolve some merge conflicts
in:
drivers/misc/eeprom/at25.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compiling out hash support code when CONFIG_PPC_64S_HASH_MMU=n saves
128kB kernel image size (90kB text) on powernv_defconfig minus KVM,
350kB on pseries_defconfig minus KVM, 40kB on a tiny config.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup defined(ARCH_HAS_MEMREMAP_COMPAT_ALIGN), which needs CONFIG.
Fix radix_enabled() use in setup_initial_memory_limit(). Add some
stubs to reduce number of ifdefs.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-18-npiggin@gmail.com
This adds Kconfig selection which allows 64s hash MMU support to be
disabled. It can be disabled if radix support is enabled, the minimum
supported CPU type is POWER9 (or higher), and KVM is not selected.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-17-npiggin@gmail.com
We want to use the same behavior as on Tegra186 and Tegra194, so add
this the compatible string for Tegra234 SYSRAM to the list.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211208140541.520238-1-thierry.reding@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 5b4258f672 ("misc: rtsx: rts5249 support runtime PM"), when the
rtsx controller is runtime suspended, bring CPUs offline and back online, the
runtime resume of the controller will fail:
[ 47.319391] smpboot: CPU 1 is now offline
[ 47.414140] x86: Booting SMP configuration:
[ 47.414147] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 47.571334] smpboot: CPU 2 is now offline
[ 47.686055] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 47.808174] smpboot: CPU 3 is now offline
[ 47.878146] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 48.003679] smpboot: CPU 4 is now offline
[ 48.086187] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 48.239627] smpboot: CPU 5 is now offline
[ 48.326059] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 48.472193] smpboot: CPU 6 is now offline
[ 48.574181] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 48.743375] smpboot: CPU 7 is now offline
[ 48.838047] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 48.965447] __common_interrupt: 1.35 No irq handler for vector
[ 51.174065] mmc0: error -110 doing runtime resume
[ 54.978088] I/O error, dev mmcblk0, sector 21479 op 0x1:(WRITE) flags 0x0 phys_seg 11 prio class 0
[ 54.978108] Buffer I/O error on dev mmcblk0p1, logical block 19431, lost async page write
[ 54.978129] Buffer I/O error on dev mmcblk0p1, logical block 19432, lost async page write
[ 54.978134] Buffer I/O error on dev mmcblk0p1, logical block 19433, lost async page write
[ 54.978137] Buffer I/O error on dev mmcblk0p1, logical block 19434, lost async page write
[ 54.978141] Buffer I/O error on dev mmcblk0p1, logical block 19435, lost async page write
[ 54.978145] Buffer I/O error on dev mmcblk0p1, logical block 19436, lost async page write
[ 54.978148] Buffer I/O error on dev mmcblk0p1, logical block 19437, lost async page write
[ 54.978152] Buffer I/O error on dev mmcblk0p1, logical block 19438, lost async page write
[ 54.978155] Buffer I/O error on dev mmcblk0p1, logical block 19439, lost async page write
[ 54.978160] Buffer I/O error on dev mmcblk0p1, logical block 19440, lost async page write
[ 54.978244] mmc0: card aaaa removed
[ 54.978452] FAT-fs (mmcblk0p1): FAT read failed (blocknr 4257)
There's interrupt immediately raised on rtsx_pci_write_register() in
runtime resume routine, but the IRQ handler hasn't registered yet.
So we can either move rtsx_pci_write_register() after rtsx_pci_acquire_irq(),
or just stop mangling IRQ on runtime PM. Choose the latter to save some
CPU cycles.
Fixes: 5b4258f672 ("misc: rtsx: rts5249 support runtime PM")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1951784
Link: https://lore.kernel.org/r/20211126003246.1068770-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make multi-line comment style aligned.
While at it, drop filename from the file.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split headers to three groups and sort alphabetically in each of them.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the similar way as it's done for EEPROM, factor out
a new helper function for FRAM.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's obvious that custom approach of getting power of 2 number with
int_pow() kinda interesting. Replace it and some others approaches
by using a simple BIT() operation.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to copy twice the same data. Drop needless local
variable.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Access to platform data via dev_get_platdata() getter to make code cleaner.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_property_read_u32() may return different error codes.
Unshadow them in the at25_fw_to_chip() to give better error
report.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently some values are compared against the contents of the chip structure
and most are from its updated copy in at25->chip. Use the latter one everywhere
in ->probe().
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Obviously the byte_len value should be checked from the chip
and not from at25->chip.
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125212729.86585-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even if we know that we are going to fill everything later on
it's bad style and fragile to copy garbage from the stack to
the data structure that will be used in the driver.
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125212729.86585-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit f60e707490 ("misc: at25: Make use of device property API")
made a good job by enabling the driver for non-OF platforms, but the
recent commit 604288bc61 ("nvmem: eeprom: at25: fix type compiler warnings")
brought that back.
Restore greatness of the driver once again.
Fixes: eab61fb1cc ("nvmem: eeprom: at25: fram discovery simplification")
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125212729.86585-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit fd307a4ad3 ("nvmem: prepare basics for FRAM support") added
support for FRAM devices such as the Cypress FM25V. During testing, it
was found that the FRAM detects properly, however reads and writes fail.
Upon further investigation, two problem were found in at25_probe() routine.
1) In the case of an FRAM device without platform data, eg.
fram == true && spi->dev.platform_data == NULL
the stack local variable "struct spi_eeprom chip" is not initialized
fully, prior to being copied into at25->chip. The chip.flags field in
particular can cause problems.
2) The byte_len of FRAM is computed from its ID register, and is stored
into the stack local "struct spi_eeprom chip" structure. This happens
after the same structure has been copied into at25->chip. As a result,
at25->chip.byte_len does not contain the correct length of the device.
In turn this can cause checks at beginning of at25_ee_read() to fail
(or equally, it could allow reads beyond the end of the device length).
Fix both of these issues by eliminating the on-stack struct spi_eeprom.
Instead use the one inside at25_data structure, which starts of zeroed.
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Link: https://lore.kernel.org/r/20211108181627.645638-1-ralph.siemsen@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buffer list is sorted and this is not being considered while
calculating packet size. This would lead to improper copy length
calculation for non-dmaheap buffers which would eventually cause
sending improper buffers to DSP.
Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Link: https://lore.kernel.org/r/1637771481-4299-1-git-send-email-jeyr@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use member client only to get a reference to the associated struct
device, via &client->dev. However we can get the same reference from
the associated regmap, via regmap_get_device(regmap).
Therefore struct at24_client can be removed and replaced with a regmap
pointer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Expose the client dma mapping via mei client bus interface.
The client dma has to be mapped before the device is enabled,
therefore we need to create device linking already during mapping
and we need to unmap after the client is disable hence we need to
postpone the unlink and flush till unmapping or when
destroying the device.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Co-developed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210420172755.12178-1-emmanuel.grumbach@intel.com
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-1-emmanuel.grumbach@intel.com
- Add support for new ACPI device configuration object called _DSC
to allow certain devices to be probed without changing their power
states, document it and make two drivers use it (Sakari Ailus,
Rajmohan Mani).
- Fix device wakeup power reference counting broken recently by
mistake (Rafael Wysocki).
- Drop unused symbol and macros depending on it from acgcc.h (Rafael
Wysocki).
- Add HP ZHAN 66 Pro to the "no EC wakeup" quirk list (Binbin Zhou).
- Add Xiaomi Mi Pad 2 to the backlight quirk list and drop an unused
piece of data from all of the list entries (Hans de Goede).
- Fix register read accesses handling in the Intel PMIC operation
region driver (Hans de Goede).
- Clean up static variables initialization in the EC driver
(wangzhitong).
-----BEGIN PGP SIGNATURE-----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=k8+T
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add support for a new ACPI device configuration object called
_DSC, fix some issues including one recent regression, add two new
items to quirk lists and clean up assorted pieces of code.
Specifics:
- Add support for new ACPI device configuration object called _DSC
("Deepest State for Configuration") to allow certain devices to be
probed without changing their power states, document it and make
two drivers use it (Sakari Ailus, Rajmohan Mani).
- Fix device wakeup power reference counting broken recently by
mistake (Rafael Wysocki).
- Drop unused symbol and macros depending on it from acgcc.h (Rafael
Wysocki).
- Add HP ZHAN 66 Pro to the "no EC wakeup" quirk list (Binbin Zhou).
- Add Xiaomi Mi Pad 2 to the backlight quirk list and drop an unused
piece of data from all of the list entries (Hans de Goede).
- Fix register read accesses handling in the Intel PMIC operation
region driver (Hans de Goede).
- Clean up static variables initialization in the EC driver
(wangzhitong)"
* tag 'acpi-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: ACPI: Fix non-D0 probe _DSC object example
ACPI: Drop ACPI_USE_BUILTIN_STDARG ifdef from acgcc.h
ACPI: PM: Fix device wakeup power reference counting error
ACPI: video: use platform backlight driver on Xiaomi Mi Pad 2
ACPI: video: Drop dmi_system_id.ident settings from video_detect_dmi_table[]
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
ACPI: EC: Remove initialization of static variables to false
ACPI: EC: Use ec_no_wakeup on HP ZHAN 66 Pro
at24: Support probing while in non-zero ACPI D state
media: i2c: imx319: Support device probe in non-zero ACPI D state
ACPI: Add a convenience function to tell a device is in D0 state
Documentation: ACPI: Document _DSC object usage for enum power state
i2c: Allow an ACPI driver to manage the device's power state during probe
ACPI: scan: Obtain device's desired enumeration power state
- Remove support for TI TPS80031/TPS80032 PMICs
- New Device Support
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
- New Functionality
- Add support for Power Off to Rockchip RK817
- Fix-ups
- Simplify Regmap passing to child devices; hi6421-spmi-pmic
- SPDX licensing updates; ti_am335x_tscadc
- Improve error handling; ti_am335x_tscadc
- Expedite clock search; ti_am335x_tscadc
- Generic simplifications; ti_am335x_tscadc
- Use generic macros/defines; ti_am335x_tscadc
- Remove unused code; ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD; wcd934x
- Add namespacing; ti_am335x_tscadc
- Restrict compilation to relevant arches; intel_pmt
- Provide better description/documentation; exynos_lpass
- Add SPI device ID table; altera-a10sr, motorola-cpcap, sprd-sc27xx-spi
- Change IRQ handling; qcom-pm8xxx
- Split out I2C and SPI code; arizona
- Explicitly include used headers; altera-a10sr
- Convert sysfs show() function to; sysfs_emit
- Standardise *_exit() and *_remove() return values; mc13xxx, stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups; ti_am335x_tscadc, qcom-spmi-pmic,
max77686-private
- Device Tree fix-ups; ti,am3359-tscadc, samsung,s2mps11, samsung,s2mpa01,
samsung,s5m8767, brcm,misc, brcm,cru, syscon, qcom,tcsr,
xylon,logicvc, max77686, x-powers,ac100, x-powers,axp152,
x-powers,axp209-gpio, syscon, qcom,spmi-pmic
- Bug Fixes
- Balance refcounting (get/put); ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type; sec-irq, max77693, max14577
- Repair off-by-one; altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C
-----BEGIN PGP SIGNATURE-----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=SJ7N
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Removed Drivers:
- Remove support for TI TPS80031/TPS80032 PMICs
New Device Support:
- Add support for Magnetic Reader to TI AM335x
- Add support for DA9063_EA to Dialog DA9063
- Add support for SC2730 PMIC to Spreadtrum SC27xx
- Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
- Add support for lots of new PMICS in QCom SPMI PMIC
- Add support for ADC to Diolan DLN2
New Functionality:
- Add support for Power Off to Rockchip RK817
Fix-ups:
- Simplify Regmap passing to child devices in hi6421-spmi-pmic
- SPDX licensing updates in ti_am335x_tscadc
- Improve error handling in ti_am335x_tscadc
- Expedite clock search in ti_am335x_tscadc
- Generic simplifications in ti_am335x_tscadc
- Use generic macros/defines in ti_am335x_tscadc
- Remove unused code in ti_am335x_tscadc, cros_ec_dev
- Convert to GPIOD in wcd934x
- Add namespacing in ti_am335x_tscadc
- Restrict compilation to relevant arches in intel_pmt
- Provide better description/documentation in exynos_lpass
- Add SPI device ID table in altera-a10sr, motorola-cpcap,
sprd-sc27xx-spi
- Change IRQ handling in qcom-pm8xxx
- Split out I2C and SPI code in arizona
- Explicitly include used headers in altera-a10sr
- Convert sysfs show() function to in sysfs_emit
- Standardise *_exit() and *_remove() return values in mc13xxx,
stmpe, tps65912
- Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc,
qcom-spmi-pmic, max77686-private
- Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11,
samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon,
qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100,
x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic
Bug Fixes:
- Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core
- Fix IRQ trigger type in sec-irq, max77693, max14577
- Repair off-by-one in altera-sysmgr
- Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C"
* tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits)
mfd: simple-mfd-i2c: Select MFD_CORE to fix build error
mfd: tps80031: Remove driver
mfd: max77686: Correct tab-based alignment of register addresses
mfd: wcd934x: Replace legacy gpio interface for gpiod
dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible
mfd: dln2: Add cell for initializing DLN2 ADC
mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
mfd: qcom-spmi-pmic: Document ten more PMICs in the binding
mfd: qcom-spmi-pmic: Sort compatibles in the driver
mfd: qcom-spmi-pmic: Sort the compatibles in the binding
mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit
mfd: altera-a10sr: Include linux/module.h
mfd: tps65912: Make tps65912_device_exit() return void
mfd: stmpe: Make stmpe_remove() return void
mfd: mc13xxx: Make mc13xxx_common_exit() return void
dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible
mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion
dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
dt-bindings: mfd: syscon: Add rk3368 QoS register compatible
mfd: arizona: Split of_match table into I2C and SPI versions
...
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up open
coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs. 'cxl_test'
is a module built from tools/testing/cxl/ that mocks up a CXL topology
to augment the nascent support for emulation of CXL devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver and
core-infrastructure buckets. For example, mailbox handling is now a
generic core capability consumed by the PCI and cxl_test drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYYRtyQAKCRDfioYZHlFs
Z7UsAP9DzUN6IWWnYk1R95YXYVxFriRtRsBjujAqTg49EMghawEAoHaA9lxO3Hho
l25TLYUOmB/zFTlUbe6YQptMJZ5YLwY=
=im9j
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"More preparation and plumbing work in the CXL subsystem.
From an end user perspective the highlight here is lighting up the CXL
Persistent Memory related commands (label read / write) with the
generic ioctl() front-end in LIBNVDIMM.
Otherwise, the ability to instantiate new persistent and volatile
memory regions is still on track for v5.17.
Summary:
- Fix support for platforms that do not enumerate every ACPI0016 (CXL
Host Bridge) in the CHBS (ACPI Host Bridge Structure).
- Introduce a common pci_find_dvsec_capability() helper, clean up
open coded implementations in various drivers.
- Add 'cxl_test' for regression testing CXL subsystem ABIs.
'cxl_test' is a module built from tools/testing/cxl/ that mocks up
a CXL topology to augment the nascent support for emulation of CXL
devices in QEMU.
- Convert libnvdimm to use the uuid API.
- Complete the definition of CXL namespace labels in libnvdimm.
- Tunnel libnvdimm label operations from nd_ioctl() back to the CXL
mailbox driver. Enable 'ndctl {read,write}-labels' for CXL.
- Continue to sort and refactor functionality into distinct driver
and core-infrastructure buckets. For example, mailbox handling is
now a generic core capability consumed by the PCI and cxl_test
drivers"
* tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
ocxl: Use pci core's DVSEC functionality
cxl/pci: Use pci core's DVSEC functionality
PCI: Add pci_find_dvsec_capability to find designated VSEC
cxl/pci: Split cxl_pci_setup_regs()
cxl/pci: Add @base to cxl_register_map
cxl/pci: Make more use of cxl_register_map
cxl/pci: Remove pci request/release regions
cxl/pci: Fix NULL vs ERR_PTR confusion
cxl/pci: Remove dev_dbg for unknown register blocks
cxl/pci: Convert register block identifiers to an enum
cxl/acpi: Do not fail cxl_acpi_probe() based on a missing CHBS
cxl/pci: Disambiguate cxl_pci further from cxl_mem
Documentation/cxl: Add bus internal docs
cxl/core: Split decoder setup into alloc + add
tools/testing/cxl: Introduce a mock memory device + driver
cxl/mbox: Move command definitions to common location
cxl/bus: Populate the target list at decoder create
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy
cxl/pmem: Add support for multiple nvdimm-bridge objects
cxl/pmem: Translate NVDIMM label commands to CXL label commands
...
-----BEGIN PGP SIGNATURE-----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=nsMh
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
In certain use cases (where the chip is part of a camera module, and the
camera module is wired together with a camera privacy LED), powering on
the device during probe is undesirable. Add support for the at24 to
execute probe while being in ACPI D state other than 0 (which means fully
powered on).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB
-----BEGIN PGP SIGNATURE-----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=jdhH
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Summary below. i915 starts to add support for DG2 GPUs, enables DG1
and ADL-S support by default, lots of work to enable DisplayPort 2.0
across drivers. Lots of documentation updates and fixes across the
board.
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB"
* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
drm/amd/display: MST support for DPIA
drm/amdgpu: Fix even more out of bound writes from debugfs
drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
drm/amdgpu/UAPI: rearrange header to better align related items
drm/amd/display: Enable dpia in dmub only for DCN31 B0
drm/amd/display: Fix USB4 hot plug crash issue
drm/amd/display: Fix deadlock when falling back to v2 from v3
drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
drm/amd/display: move FPU associated DCN301 code to DML folder
drm/amd/display: fix link training regression for 1 or 2 lane
drm/amd/display: add two lane settings training options
drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
drm/amd/display: implement decide lane settings
drm/amd/display: adopt DP2.0 LT SCR revision 8
drm/amd/display: FEC configuration for dpia links in MST mode
drm/amd/display: FEC configuration for dpia links
drm/amd/display: Add workaround flag for EDID read on certain docks
drm/amd/display: Set phy_mux_sel bit in dmub scratch register
...
Reduce maintenance burden of DVSEC query implementation by using the
centralized PCI core implementation.
There are two obvious places to simply drop in the new core
implementation. There remains find_dvsec_from_pos() which would benefit
from using a core implementation. As that change is less trivial it is
reserved for later.
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> (v1)
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/163379789065.692348.7117946955275586530.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it go through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to better track where in the kernel the dma-buf code is used,
put the symbols in the namespace DMA_BUF and modify all users of the
symbols to properly import the namespace to not break the build at the
same time.
Now the output of modinfo shows the use of these symbols, making it
easier to watch for users over time:
$ modinfo drivers/misc/fastrpc.ko | grep import
import_ns: DMA_BUF
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20211010124628.17691-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce REPORT_STACK_CANARY to check for differing stack canaries
between two processes (i.e. that an architecture is correctly implementing
per-task stack canaries), using the task_struct canary as the hint to
locate in the stack. Requires that one of the processes being tested
not be pid 1.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211022223826.330653-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211022090604.1065367-1-ye.guojin@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pdev->driver with to_pci_driver(). This is a step toward removing
pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Save the struct pci_driver and struct pci_error_handlers pointers from
pdev->driver instead of chasing the pointers several times. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
To avoid checking if fence exists multipled times, changed fence
handling to depend only on the fence status field:
Busy, which means CS still did not completed :
Add its QID so multi CS wait on its completion.
Finished, which means CS completed and fence exists:
Raise its completion bit if it finished mcs handling and
update if necessary the earliest timestamp.
Gone, which means CS already completed and fence deleted:
Update multi CS data to ignore timestamp and raise its
completion bit.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
No need to check the return value if the following action is the same for
both cases. In addition, now that hl_ctx_free() doesn't print if the
context is not released, its name can be misleading as the context might
stay alive after it is executed with no indication for that.
Hence we can discard it and simply put the refcount.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Remove the flag that determines whether to take a timestamp once the
interrupt arrives.
Instead, always take the timestamp once per interrupt.
This is a must for the user-space to measure its graph operations
to evaluate the graph computation time.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When adding a new node to the hpriv list, the driver should
initialize its fields before adding the new node.
Otherwise, there may be some small chance of another thread traversing
that list and accessing the new node's fields without them being
initialized.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Make the frequency set/get functionality common to all ASICs.
This makes more code reusable when adding support for newer ASICs.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix the following build/link error by adding a dependency on the CRC32
routines:
ld: drivers/misc/habanalabs/common/firmware_if.o: in function `hl_fw_dynamic_request_descriptor':
firmware_if.c:(.text.unlikely+0xc89): undefined reference to `crc32_le'
Fixes: 8a43c83fec ("habanalabs: load boot fit to device")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implement the calls to the dma-buf kernel api to create a dma-buf
object backed by FD.
We block the option to mmap the DMA-BUF object because we don't support
DIRECT_IO and implicit P2P. We only implement support for explicit P2P
through importing the FD of the DMA-BUF.
In the export phase, we provide to the DMA-BUF object an array of pages
that represent the device's memory area. During the map callback,
we convert the array of pages into an SGT. We split/merge the pages
according to the dma max segment size of the importer.
To get the DMA address of the PCI bar, we use the dma_map_resources()
kernel API, because our device memory is not backed by page struct
and this API doesn't need page struct to map the physical address to
a DMA address.
We set the orig_nents member of the SGT to be 0, to indicate to other
drivers that we don't support CPU mappings.
Note that in Habanalabs's ASICs, the device memory is pinned and
immutable. Therefore, there is no need for dynamic mappings and pinning
callbacks.
Also note that in GAUDI we don't have an MMU towards the device memory
and the user works on physical addresses. Therefore, the user doesn't
pass through the kernel driver to allocate memory there. As a result,
only for GAUDI we receive from the user a device memory physical address
(instead of a handle) and a size.
We check the p2p distance using pci_p2pdma_distance_many() and refusing
to map dmabuf in case the distance doesn't allow p2p.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When polling fences for multi CS, it is possible that fence is
no longer exists (its corresponding CS completed and the fence was
deleted) but we still accessing its parameters, causing NULL pointer
dereference.
Fixed by checking if fence exits before accessing its parameters.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Race condition occurs when CS fence completes and multi CS did not
completed yet, while waiting for multi CS ends and returns indication
to user that the CS completed. Next wait for multi CS may be triggered
by previous multi CS completion without any current CS completed,
causing an error.
Example scenario :
1. User do multi CS wait for CSs 1 and 2 on master QID 0
2. CS 1 and 2 reached the "cs release" code. The thread of CS 1
completed both the CS and multi CS handling but the completion
thread of CS 2 completed the CS but still did not executed
complete_multi_cs (note that in CS completion the sequence is to
first do complete all for the CS and then another complete all to
signal the multi_cs)
3. User received indication that CS 1 and 2 completed (since we check
the CS fence and both indicated as completed) and immediately waits
on CS 3 and 4, also on master QID 0.
4. Completion thread of CS2 executed complete_multi_cs before
completion of CS 3 and 4 and so will trigger the multi CS wait of
CSs 3 and 4 as they wait on master QID 0.
This will trigger multi CS completion although none of its
current CS has been completed.
Fixed by adding multi CS complete handling indication for each CS.
CS will be marked to the user as completed only if its fence completed
and multi CS handling is done.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There may be a situation where drivers receives continuous fatal H/W
error events from FW immediately post reset cycle.
This may be due to some fault on the silicon itself.
In such case its better to bypass reset cycle so we won't be stuck in
endless loop of resets.
This commit bypasses reset request in case driver received two back to
back FW fatal error before first occurrence of heartbeat event.
Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Taking an accurate timestamp in a close proximity of the interrupt is
required for user side statistics management.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The driver allows only a single process to open a device's FD at any
single time. This is done by checking "hdev->compute_ctx" under mutex.
Therefore, to prevent a race between the moment a user closes it's FD
and when another user tries to open the device, we need to make sure
that clearing this variable is the very last thing that is done in the
code of the FD's release.
I'm moving the idle check before clearing this variable and the
"reset on device release". btw, if the reset happens it will prevent
any other user from opening the device until the reset is finished.
An important thing to note is that we need to remove the user process
that is closing the device from the process list BEFORE calling the
reset function. That is to prevent a case where the reset code will
try to kill that user process and it is unnecessary as the process
doesn't hold any device/driver resources anymore.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reset to the device is not necessarily due to an error, so print it
as info instead of error.
In addition, print the type of reset we are doing:
- reset of the entire device (aka hard reset)
- reset of the device after user have released it (less than hard reset)
- lighter reset of an inference device (aka soft reset)
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Soft-reset is the procedure where we reset only the compute/DMA engines
of the device, without requiring the current user-space process to
release the device.
This type of reset can happen if TDR event occurred (a workload got
stuck) or by a root request through sysfs.
This is only relevant for inference ASICs, as there is no real-world
use-case to do that in training, because training runs on multiple
devices.
In addition, we also do (in certain ASICs) a reset upon device release.
That reset uses the same code as the soft-reset.
Therefore, to better differentiate between the two resets, it is better
to rename the soft-reset support as "inference soft-reset", to make
the code more self-explanatory.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The translation in debugfs of device memory MMU virtual addresses was
wrong as it did not take into consideration the fact that the page
sizes there can be not power of 2.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to avoid user target value wraparound, we modify the
current interface so user will be able to wait for an 8-byte
target value rather than a 4-byte value.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During TDR handling, we check multiple times if CS is valid.
No need to perform this check as CS must be valid at all time
during the TDR handling.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support to retrieve following power info via HWMON:
- instantaneous power value
- highest value since last reset
- reset the highest place holder
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of having dedicated function per message that we want to send
to the firmware in COMMS protocol, have a generic function that we can
call to from other parts of the driver
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of using the Linux kernel HWMON enums definition when
communicating with the firmware, use proprietary HWMON based enums
i.e. map hwmon.h header enum to cpucp_if.h based enum while.
This is needed because the HWMON enums are not forcing backward
compatibility and therefore changes can break compatibility between
newer driver and older firmware.
The driver will check for CPU_BOOT_DEV_STS0_MAP_HWMON_EN bit to
validate if f/w supports cpucp->hwmon enum mapping to support older
firmware where this mapping won't be available.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Command submission timeout is currently determined during driver
loading time. As some environments requires this timeout to be
modified in runtime, we introduce a new debugfs node that controls
the timeout value without the need to reload the driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The newly added SPI device ID table does not work because the
entry is incorrectly copied from the OF device table.
During build testing, this shows as a compile failure when building
it as a loadable module:
drivers/misc/eeprom/eeprom_93xx46.c:424:1: error: redefinition of '__mod_of__eeprom_93xx46_of_table_device_table'
MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
Change the entry to refer to the correct symbol.
Fixes: 137879f7ff ("eeprom: 93xx46: Add SPI device ID table")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211014153730.3821376-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Up to now ad_dpot_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211012153945.2651412-12-u.kleine-koenig@pengutronix.de
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Up to now lis3lv02d_remove_fs() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211012153945.2651412-13-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop HBM responses also in the early shutdown phase where
the usual traffic is allowed.
Extend the rule that drop HBM responses received during the shutdown phase
by also in MEI_DEV_POWERING_DOWN state.
This resolves the stall if the driver is stopping in the middle
of the link init or link reset.
Fixes: da3eb47c90 ("mei: hbm: drop hbm responses on shutdown")
Fixes: 36edb1407c ("mei: allow clients on bus to communicate in remove callback")
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20211013074552.2278419-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc_put_args is copying all the output buffers to user. For large
number of output context buffers, this might cause performance
degradation. Copying is not needed for DMA-BUF heap buffers.
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Link: https://lore.kernel.org/r/1632386272-18139-1-git-send-email-jeyr@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For latest chipsets, upto 13 fastrpc sessions can be
supported. This includes 12 compute sessions and 1 cpz
session. Not updating this might result to out of bounds
memory access issues if more than 9 context bank nodes
are added to the DT file.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Link: https://lore.kernel.org/r/1632123274-32054-1-git-send-email-jeyr@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210922184048.34770-1-broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210923172453.4921-1-broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MFD_CORE depends on HAS_IOMEM so anything that selects MFD_CORE should
also depend on HAS_IOMEM since 'select' does not check any dependencies
of the symbol that is being selected.
Prevents this kconfig warning:
WARNING: unmet direct dependencies detected for MFD_CORE
Depends on [n]: HAS_IOMEM [=n]
Selected by [m]:
- HI6421V600_IRQ [=m] && OF [=y] && SPMI [=m]
Fixes: bb3b6552a5 ("staging: hikey9xx: split hi6421v600 irq into a separate driver")
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211004001641.23180-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc driver is using find_vma() without any protection, as a
result we see below warning due to recent patch 5b78ed24e8
("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()")
which added mmap_assert_locked() in find_vma() function.
This bug went un-noticed in previous versions. Fix this issue by adding
required protection while calling find_vma().
CPU: 0 PID: 209746 Comm: benchmark_model Not tainted 5.15.0-rc2-00445-ge14fe2bf817a-dirty #969
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : find_vma+0x64/0xd0
lr : find_vma+0x60/0xd0
sp : ffff8000158ebc40
...
Call trace:
find_vma+0x64/0xd0
fastrpc_internal_invoke+0x570/0xda8
fastrpc_device_ioctl+0x3e0/0x928
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x44/0x100
el0_svc_common.constprop.3+0x70/0xf8
do_el0_svc+0x24/0x88
el0_svc+0x3c/0x138
el0t_64_sync_handler+0x90/0xb8
el0t_64_sync+0x180/0x184
Fixes: 80f3afd72b ("misc: fastrpc: consider address offset before sending to DSP")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210922154326.8927-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clang-14 complains about an unusual way of converting a pointer to
an integer:
drivers/misc/cb710/sgbuf2.c:50:15: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]
return ((ptr - NULL) & 3) != 0;
Replace this with a normal cast to uintptr_t.
Fixes: 5f5bac8272 ("mmc: Driver for CB710/720 memory card reader (MMC part)")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210927121408.939246-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI ID table entry
for the device name part of the compatible - currently only the full
compatible is listed which isn't very idiomatic and won't match the
modalias that is generated.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Cc: stable <stable@vger.kernel.org>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210923194609.52647-1-broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are lots of fields in struct hi6421_spmi_pmic that aren't
used. As a matter of fact, only regmap is needed.
So, drop the struct as a whole, and set regmap as the drvdata.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/1828cb783b1ebca0b98bf0b3077d8701adb228f7.1630586862.git.mchehab+huawei@kernel.org
In wait for CS IOCTL code, the driver resets the incoming args structure
before returning to the user, regardless of the return value of the
IOCTL.
In case the IOCTL returns EINTR, resetting the args will result in error
in case the userspace will repeat the ioctl call immediately (which is
the behavior in the hl-thunk userspace library).
The solution is to reset the args only if the driver returns success (0)
as a return value for the IOCTL.
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
Finally, Arnd Bergmann reminded that the documentation was updated 11 years
ago to only describe the modern linux/dma-mapping.h interfaces and mark the
old bus-specific ones as no longer recommended, see commit 216bf58f40
("Documentation: convert PCI-DMA-mapping.txt to use the generic DMA API").
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/b5296677f92f7bace957e66479b3d57a5a824ca1.1631942796.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to set the tty class-device driver data before registering the
tty to avoid having a racing open() dereference a NULL pointer.
Fixes: 91ca10d6fa ("misc: bcm-vk: add ttyVK support")
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917115736.5816-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
Finally, Arnd Bergmann reminded that the documentation was updated 11 years
ago to only describe the modern linux/dma-mapping.h interfaces and mark the
old bus-specific ones as no longer recommended, see commit 216bf58f40
("Documentation: convert PCI-DMA-mapping.txt to use the generic DMA API").
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
@@ @@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL@@
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/590154f2ab113088346ae76c3f13f8b1cbebccbb.1631942274.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Staged submission consists of multiple command submissions.
In order to be explicit, driver should return a single cs sequence
for every cs in the submission, or else user may try to wait on
an internal CS rather than waiting for the whole submission.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add handling for case where the user doesn't set wait offset,
and keeps it as 0. In such a case the driver will decrement one
from this zero value which will cause the code to wait for
wrong number of signals.
The solution is to treat this case as in legacy wait cs,
and wait for the next signal.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As user can send wrong arguments to multi CS API, we rate limit
the amount of errors dumped to dmesg, in addition we change the
severity to warning.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Couple of fixes to the LBW RR configuration:
1. Add missing configuration of the SM RR registers in the DMA_IF.
2. Remove HBW range that doesn't belong.
3. Add entire gap + DBG area, from end of TPC7 to end of entire
DBG space.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As collective wait operation is required only when NIC ports are
available, we disable the option to submit a CS in case all the ports
are disabled, which is the current situation in the upstream driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to FLR scenario when running inside a VM, we must not use indirect
MSI because it might cause some issues on VM destroy.
In a VM we use single MSI mode in contrary to multi MSI mode which is
used in bare-metal.
Hence direct MSI should be used in single MSI mode only.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case of single staged cs with both first/last indications
set, we reach a scenario where in cs_release function flow
we don't cancel the TDR work before freeing the cs memory,
this lead to kernel OOPs since when the timer expires
the work pointer will be freed already.
In addition treat wait encaps cs "not found" handle
as "OK" for the user in order to keep the user interface
for both legacy and encpas signal/wait features the same.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We have a potential race where a user interrupt can be received
in between user thread value comparison and before request was
added to wait list. This means that if no consecutive interrupt
will be received, user thread will timeout and fail.
The solution is to add the request to wait list before we
perform the comparison.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + size * count" in the kzalloc() function.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210905153707.9638-1-len.baker@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have different style on where we place module_*() and MODULE_*() macros.
Inherit the style from the original module (now pvpanic-mmio.c).
Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210829124354.81653-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As there's no upstream DT bindings for this driver, let's
update its DT schema, while it is not too late.
While here, add error messages, in order to help discovering
problems during probing time.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/746237a6bdbb84d4271a77994c82bccf524680c7.1630659949.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 505b08777d ("misc: genwqe: Use dma_set_mask_and_coherent to simplify code")
changed the logic in the code.
Instead of a ||, a && should have been used to keep the code the same.
Fixes: 505b08777d ("misc: genwqe: Use dma_set_mask_and_coherent to simplify code")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/be49835baa8ba6daba5813b399edf6300f7fdbda.1631130862.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit it
as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
"obviously correct" when reviewing it locally :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYT4IaQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykQjwCgpMt1Tscv4Ek1iIigZTvygsgnBcgAniQH3nC7
iE5oyKRtQ3LolPGkAExd
=oC1V
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single patch for 5.15-rc1, for the lkdtm misc driver.
It resolves a build issue that many people were hitting with your
current tree, and Kees and others felt would be good to get merged
before -rc1 comes out, to prevent them from having to constantly hit
it as many development trees restart on -rc1, not older -rc releases.
It has NOT been in linux-next, but has passed 0-day testing and looks
'obviously correct' when reviewing it locally :)"
* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: Use init_uts_ns.name instead of macros
Here is a second round of misc driver patches for 5.15-rc1.
In here is only updates for the Habanalabs driver. This request is late
because the previously-objected-to dma-buf patches are all removed and
some fixes that you and others found are now included in here as well.
All of these have been in linux-next for well over a week with no
reports of problems, and they are all self-contained to only this one
driver. Full details are in the shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYTtnnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldxgCfeXoRaaCBSzpbejgf48CQRd/m/v0AmgMRVUxB
kJ58eqBrDMdeExOkvkh8
=6d/9
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull habanalabs updates from Greg KH:
"Here is another round of misc driver patches for 5.15-rc1.
In here is only updates for the Habanalabs driver. This request is
late because the previously-objected-to dma-buf patches are all
removed and some fixes that you and others found are now included in
here as well.
All of these have been in linux-next for well over a week with no
reports of problems, and they are all self-contained to only this one
driver. Full details are in the shortlog"
* tag 'char-misc-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (61 commits)
habanalabs/gaudi: hwmon default card name
habanalabs: add support for f/w reset
habanalabs/gaudi: block ICACHE_BASE_ADDERESS_HIGH in TPC
habanalabs: cannot sleep while holding spinlock
habanalabs: never copy_from_user inside spinlock
habanalabs: remove unnecessary device status check
habanalabs: disable IRQ in user interrupts spinlock
habanalabs: add "in device creation" status
habanalabs/gaudi: invalidate PMMU mem cache on init
habanalabs/gaudi: size should be printed in decimal
habanalabs/gaudi: define DC POWER for secured PMC
habanalabs/gaudi: unmask out of bounds SLM access interrupt
habanalabs: add userptr_lookup node in debugfs
habanalabs/gaudi: fetch TPC/MME ECC errors from F/W
habanalabs: modify multi-CS to wait on stream masters
habanalabs/gaudi: add monitored SOBs to state dump
habanalabs/gaudi: restore user registers when context opens
habanalabs/gaudi: increase boot fit timeout
habanalabs: update to latest firmware headers
habanalabs/gaudi: minimize number of register reads
...
Using generated/compile.h triggered a full LKDTM rebuild with every
build. Avoid this by using the exported strings instead.
Fixes: b8661450bc ("lkdtm: Add kernel version to failure hints")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210901233406.2571643-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Highlights:
- Move all the Intel drivers into their own subdir(s) (mostly Kate's work)
- New meraki-mx100 platform driver
- Asus WMI driver enhancements, including
/sys/firmware/acpi/platform_profile support
- New BIOS SAR driver for Intel M.2 WWAM modems
- Alder Lake support for the Intel PMC driver
- A whole bunch of cleanups + fixes all over the place
The following is an automated git shortlog grouped by driver:
BIOS SAR driver for Intel M.2 Modem:
- BIOS SAR driver for Intel M.2 Modem
ISST:
- use semi-colons instead of commas
- Fix optimization with use of numa
Replace deprecated CPU-hotplug functions.:
- Replace deprecated CPU-hotplug functions.
Update Mario Limonciello's email address in the docs:
- Update Mario Limonciello's email address in the docs
acer-wmi:
- Add Turbo Mode support for Acer PH315-53
add meraki-mx100 platform driver:
- add meraki-mx100 platform driver
asus-nb-wmi:
- Add tablet_mode_sw=lid-flip quirk for the TP200s
- Allow configuring SW_TABLET_MODE method with a module option
asus-wmi:
- Fix "unsigned 'retval' is never less than zero" smatch warning
- Delete impossible condition
- Add support for platform_profile
- Add egpu enable method
- Add dgpu disable method
- Add panel overdrive functionality
dell-smbios:
- Remove unused dmi_system_id table
dell-smbios-wmi:
- Add missing kfree in error-exit from run_smbios_call
- Avoid false-positive memcpy() warning
dell-smo8800:
- Convert to be a platform driver
dual_accel_detect:
- Use the new i2c_acpi_client_count() helper
gigabyte-wmi:
- add support for B450M S2H V2
- add support for X570 GAMING X
hp_accel:
- Convert to be a platform driver
- Remove _INI method call
i2c:
- acpi: Add an i2c_acpi_client_count() helper function
i2c-multi-instantiate:
- Use the new i2c_acpi_client_count() helper
ideapad-laptop:
- Fix Legion 5 Fn lock LED
intel-hid:
- Move to intel sub-directory
intel-rst:
- Move to intel sub-directory
intel-smartconnect:
- Move to intel sub-directory
intel-uncore-frequency:
- Move to intel sub-directory
intel-vbtn:
- Move to intel sub-directory
intel-wmi-sbl-fw-update:
- Move to intel sub-directory
intel-wmi-thunderbolt:
- Move to intel sub-directory
intel_atomisp2:
- Move to intel sub-directory
intel_bxtwc_tmu:
- Move to intel sub-directory
intel_cht_int33fe:
- Use the new i2c_acpi_client_count() helper
intel_chtdc_ti_pwrbtn:
- Move to intel sub-directory
intel_int0002_vgpio:
- Move to intel sub-directory
intel_mrfld_pwrbtn:
- Move to intel sub-directory
intel_oaktrail:
- Move to intel sub-directory
intel_pmc_core:
- Move to intel sub-directory
- Prevent possibile overflow
intel_pmt_telemetry:
- Ignore zero sized entries
intel_punit_ipc:
- Move to intel sub-directory
intel_scu_ipc:
- Fix doc of intel_scu_ipc_dev_command_with_size()
intel_speed_select_if:
- Move to intel sub-directory
intel_telemetry:
- Move to intel sub-directory
intel_turbo_max_3:
- Move to intel sub-directory
lg-laptop:
- Use correct event for keyboard backlight FN-key
- Use correct event for touchpad toggle FN-key
- Support for battery charge limit on newer models
platform/mellanox:
- mlxbf-pmc: fix kernel-doc notation
platform/surface:
- aggregator: Use y instead of objs in Makefile
- surface3_power: Use i2c_acpi_get_i2c_resource() helper
platform/x86/intel:
- pmc/core: Add GBE Package C10 fix for Alder Lake PCH
- pmc/core: Add Alder Lake low power mode support for pmc core
- pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake
- pmc/core: Add Alderlake support to pmc core driver
- int3472: Use y instead of objs in Makefile
- pmt: Use y instead of objs in Makefile
- int33fe: Use y instead of objs in Makefile
- Move Intel PMT drivers to new subfolder
thermal/drivers/intel:
- Move intel_menlow to thermal drivers
think-lmi:
- add debug_cmd
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmEw1KAUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wk7Qf/dsaaDgx7aC6DfKzdcMgfeLIdTaGm
a6svNXM2t/JFdvhjYzxA+4QlQgco7zkN06iRlWbObEonSUsHlGlwEOHX60VgcopO
qJaqnznmfdXUocFTnA+5acJXabNaw7xkKHS0K61UWgk+mm6aMuygpKxULnNTa4X+
p3HoU6uXFckpoA/Jstzo5UfegNYhg11bflNd7XN4F3rMCbbNHAsWlf4oVr2YsEHa
wECW+1e8wZl4BInUzoXQhilRoybJWXWJ8sLsvQfDXLs9aNoLdDqu9p0MuXEW5QqE
wNt26SNNAP2L49BD6kaJszV5Ry/jNSEtVkWwkrzHbGTZoOEyMYas8pm6Uw==
=iK1W
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Move all the Intel drivers into their own subdir(s) (mostly Kate's
work)
- New meraki-mx100 platform driver
- Asus WMI driver enhancements, including support for
/sys/firmware/acpi/platform_profile
- New BIOS SAR driver for Intel M.2 WWAM modems
- Alder Lake support for the Intel PMC driver
- A whole bunch of cleanups + fixes all over the place"
* tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call
platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning
platform/x86: ISST: use semi-colons instead of commas
platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning
platform/x86: asus-wmi: Delete impossible condition
platform/x86: hp_accel: Convert to be a platform driver
platform/x86: hp_accel: Remove _INI method call
platform/mellanox: mlxbf-pmc: fix kernel-doc notation
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH
platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core
platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver
platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory
platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory
platform/x86: intel-vbtn: Move to intel sub-directory
platform/x86: intel_oaktrail: Move to intel sub-directory
platform/x86: intel_int0002_vgpio: Move to intel sub-directory
platform/x86: intel-hid: Move to intel sub-directory
platform/x86: intel_atomisp2: Move to intel sub-directory
platform/x86: intel_speed_select_if: Move to intel sub-directory
...
- Add max-virtual-functions to endpoint binding (Kishon Vijay Abraham I)
- Add pci_epf_add_vepf() API to add virtual function to endpoint (Kishon
Vijay Abraham I)
- Add pci_epf_vepf_link() to link virtual function to endpoint physical
function (Kishon Vijay Abraham I)
- Add virtual function number to pci_epc_ops endpoint ops interfaces
(Kishon Vijay Abraham I)
- Simplify register base address computation for endpoint BAR configuration
(Kishon Vijay Abraham I)
- Add support to configure virtual functions in cadence endpoint driver
(Kishon Vijay Abraham I)
- Add SR-IOV configuration to endpoint test driver (Kishon Vijay Abraham I)
- Document configfs usage to create virtual functions for endpoints (Kishon
Vijay Abraham I)
* remotes/lorenzo/pci/endpoint:
Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV
misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV device
PCI: cadence: Add support to configure virtual functions
PCI: cadence: Simplify code to get register base address for configuring BAR
PCI: endpoint: Add virtual function number in pci_epc ops
PCI: endpoint: Add support to link a physical function to a virtual function
PCI: endpoint: Add support to add virtual function in endpoint core
dt-bindings: PCI: pci-ep: Add binding to specify virtual function
Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more cleanups
on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS9/lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZNwCggKViEViSGqJFIafAZZjmI3Nt6tUAoMkRlhcd
n1MS3snS0Sq+7BdJs37M
=GyxP
-----END PGP SIGNATURE-----
Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had been
maintained out-of-tree by Larry with the end goal of actually being able
to get this driver out of staging eventually. Despite that driver being
"newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to see,
that is why there are additions to the mfc and misc driver subsystems.
All of these were acked by the various subsystem maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+BKg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yku5gCgyMykJ2mwtEiQxfAWu13e2iZX29AAnjk38ANp
Un2sQXYnL9RVlcnjLg+X
=jMWL
-----END PGP SIGNATURE-----
Merge tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO and staging driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had
been maintained out-of-tree by Larry with the end goal of actually
being able to get this driver out of staging eventually. Despite that
driver being "newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to
see, that is why there are additions to the mfc and misc driver
subsystems. All of these were acked by the various subsystem
maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
[ Note: the r8188eu merge clashed with commit 89939e8906 ("staging:
rtlwifi: use siocdevprivate") from the networking tree. When resolving
the issue, I noted that the whole r8188eu rtw_android code is dead
since commit ae7471cae0 ("staging: r8188eu: remove rtw_ioctl
function").
End result: the merge resolution was to throw all of that away,
rather than do the mindless fixup to code that isn't actually
reachable - Linus ]
* tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits)
staging: vt6655: Remove filenames in files
staging: r8188eu: add extra TODO entries
staging: vt6656: Remove filenames in files
staging: wlan-ng: fix invalid assignment warning
staging: r8188eu: rename fields of struct rtl_ps
staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS()
staging: r8188eu: rename fields of struct dyn_primary_cca
staging: r8188eu: rename struct field Wifi_Error_Status
staging: r8188eu: Provide a TODO file for this driver
staging: r8188eu: remove unneeded variable
staging: r8188eu: remove unneeded conversions to bool
staging: r8188eu: remove {read,write}_macreg
staging: r8188eu: core: remove condition with no effect
staging: r8188eu: remove ethernet.h header file
staging: r8188eu: remove ip.h header file
staging: r8188eu: remove if_ether.h header file
staging: r8188eu: make rtw_deinit_intf_priv return void
staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
This commit corrects CARD NAME for Gaudi as "HL205"
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When the f/w runs in secured mode, it can reset the ASIC when certain
events occur. In unsecured mode, the driver asks the f/w to reset the
ASIC for those events.
We need to perform the entire reset procedure but without accessing the
ASIC. i.e. without halting the engines and without sending messages
to the f/w.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix 2 areas in the code where it's possible the code will
go to sleep while holding a spinlock.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
copy_from_user might sleep so we can never call it when we have
a spinlock.
Moreover, it is not necessary in waiting for user interrupt, because
if multiple threads will call this function on the same interrupt,
each one will have it's own fence object inside the driver. The
user address might be the same, but it doesn't really matter to us,
as we only read from it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Checking if the device is operational when entering the function to
wait for user interrupt is not something that is useful or necessary.
It is not done in any other wait_for_cs ioctl path.
If the device becomes non-operational during the wait, the reset
function will make sure the process wait is interrupted.
Instead, move the check to the beginning of hl_wait_ioctl(). It will
block any attempt to wait on CS or user interrupt once the device
is already marked as non-operational.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because this spinlock is taken in an interrupt handler, we must use
the spin_lock_irqsave/irqrestore version to disable the interrupts
on the local CPU. Otherwise, we can have a potential deadlock (if
the interrupt handler is scheduled to run on the same cpu that the
code who took the lock was running on).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
On init, the disabled state is cleared right before hw_init and that
causes the device to report on "Operational" state before the device
initialization is finished. Although the char device is not yet exposed
to the user at this stage, the sysfs entries are exposed.
This can cause errors in monitoring applications that use the sysfs
entries.
In order to avoid this, a new state "in device creation" is introduced
to ne reported when the device is not disabled but is still in init
flow.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This must be done to clear the internal mem cache so we won't get
ecc errors on the first invalidation.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In secured mode, the CGM is disabled. Therefore, the DC power is
higher. Without taking it into consideration, the utilization is
12-15% at idle.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The out of bounds SLM access TPC interrupt indicates a severe compiler
bug and needs to be informed to user.
This interrupt is currently masked so unmask it.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is useful to have the ability to see which user address was pinned
to which physical address during the initial mapping. We already have
all that info stored, but no means to search this data (which may be
quite large).
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case F/W security is enabled driver cannot access ECC registers,
hence driver must fetch the ECC info from F/W.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During the integration, the multi-CS requirements were refined:
- The multi CS call shall wait on "per-ASIC" predefined stream masters
instead of set of streams.
- Stream masters are set of QIDs used by the upper SW layers (synapse)
for completion (must be an external/HW queue).
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current "state dump" is lacking of monitored SOB IDs. Add for
convenience.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because we don't have multiple contexts in GAUDI, and to minimize
calls to is_idle function (which uses many register reads), move
the call to clear the user registers to the opening of the single
user context.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Various f/w versions have different timeouts, so increase the default
timeout to accommodate all the options.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add several new packets between driver and firmware.
Add matching compatibility bits for backward compatibility.
Add support for 4K event types.
Add information about pcie errors.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because the register reads might be trapped by the hypervisor in
certain deployments, minimize the number of reads during runtime by
moving static initializations to functions that occur during device
initialization instead of context open.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The address resolution via debugfs was not taking into consideration the
page offset, resulting in a wrong address.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently userptr endpoint in debugfs prints out virtual addresses
in the user process memory space, without specifying their owner process
ID. User space virtual address is meaningless without knowing the owner
process.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
HW init is mostly about configuring registers. Therefore, it is better
to activate DMAs only in late init and afterwards.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to enhance debuggability, we will scrub the whole HBM to
a specific value, in case HBM scrubbing is enabled. Scrubbing will be
performed after reset and after user closes the FD.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently there is no validity check for event ID received from F/W,
Thus exposing driver to memory overrun.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For some ASICs, the f/w reads the msg_to_cpu_reg value after
reset, and for some it doesn't.
Therefore, to be sure f/w doesn't read a wrong value after reset, we
need to clear this register before the reset occurs.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to better support variants of the same ASIC
the set_pci_regions function is now an ASIC function which
allows each ASIC to implement it internally, thus keeping
all definitions static to the file.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Done as the bar size can exceed 4GB.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add the server type property to the hl_info_hw_ip_info structure
that is exposed to the user via the INFO IOCTL.
This is needed by the userspace s/w stack to know the connections map
of the internal links that connect the ASIC among themselves inside the
server.
The F/W will tell us, as part of the NIC information, the server type
that the GAUDI is located in.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This warning is redundant as we will print a notice in case the device
is still in use after the FD was closed. No need to print the same
message per context.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit is the second part of the encapsulated signals feature.
It contains the driver support for submission of cs with encapsulated
signals and the wait for them.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The signaling from within encapsulated OP capability is merged into the
existing stream architecture, such that one can trigger multiple
signaling from an encapsulated op, according to the time the event
was done in the graph execution and avoid the need to wait for the
whole encapsulated OP execution to be complete before the stream can
signal.
This commit implements only the reserve/unreserve part.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the SOB reset was in fence release function which happens
only at the CS wraparound during the CS allocation time.
In order to support the new encapsulated signals reservation feature,
we need to move the SOB reset to an earlier phase because this SOB
could reach it's max value very fast using the signal reservation.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When user sends multiple CSs, waiting for each CS is not efficient
as it involves many user-kernel context switches.
In order to address this issue we add support to "wait on multiple CSs"
using a new uAPI which can wait on maximum of 32 CSs. The new uAPI is
defined using a new flag - WAIT_FOR_MULTI_CS - in the wait_for_cs IOCTL.
The input parameters for this uAPI will be:
@seq: user pointer to an array of up to 32 CS's sequence numbers.
@seq_array_len: length of sequence array.
@timeout_us: timeout for waiting for any CS.
The output paramateres for this API will be:
@status: multi CS ioctl completion status (dedicated status was added as
well).
@flags: bitmap of output flags of the CS.
@cs_completion_map: bitmap for multi CS, if CS sequence that was placed
in index N in input seq array has completed- the N-th
bit in cs_completion_map will be 1, otherwise it will
be 0.
@timestamp_nsec: timestamp of the first completed CS
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To add proper support for wait-for-multi-CS, locking the CS lock
for each CS fence in the list is not efficient.
Instead, this patch add support to lock the CS lock once to get all
required fences.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The driver quietly handles memory mappings that were not freed so no
need to print a warning about that when user closes the FD.
Accordingly, revise the text that is printed in case the device is
still in use after the user process closed the FD.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a scenario where an ongoing soft reset would race with an
ongoing heartbeat routine, eventually causing heartbeat to fail and
thus to escalate into a hard reset.
With this fix, soft-reset procedure will disable heartbeat CPU messages
and flush the (ongoing) current one before continuing with reset code.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
