Commit Graph

285 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Helge Deller
d81f734462 parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge
A MegaRAID PCI card in my rp5470 acts as PCI-PCI bridge.
Resource allocation for PCI devices behind such a bridge is quite incomplete,
so that syslog reports those warnings:

 LBA 0:10: PCI host bridge to bus 0000:50
 pci_bus 0000:50: root bus resource [io  0x80000-0x8ffff] (bus address [0x0000-0xffff])
 pci_bus 0000:50: root bus resource [mem 0xffffffff94000000-0xffffffff95ffffff] (bus address [0x94000000-0x95ffffff])
 pci_bus 0000:50: root bus resource [bus 50-57]
 pci 0000:50:00.0: [8086:0964] type 01 class 0x060400
 pci 0000:50:00.1: [8086:1960] type 00 class 0x0e0001
 pci 0000:50:00.1: reg 0x10: [mem 0x00000000-0x003fffff pref]
 pci 0000:50:00.1: reg 0x30: [mem 0x00000000-0x00007fff pref]
 pci 0000:50:00.0: Changing bridge control from 0x00000000 to 0x00000023
 pci_bus 0000:51: busn_res: can not insert [bus 51-ff] under [bus 50-57] (conflicts with (null) [bus 50-57])
 pci 0000:50:00.0: PCI bridge to [bus 51-ff]
 pci 0000:50:00.0:   bridge window [io  0x80000-0x80fff]
 pci 0000:50:00.0:   bridge window [mem 0x00000000-0x000fffff]
 pci 0000:50:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
 pci 0000:50:00.0: can't claim BAR 14 [mem 0x00000000-0x000fffff]: no compatible bridge window
 pci 0000:50:00.0: can't claim BAR 15 [mem 0x00000000-0x000fffff pref]: no compatible bridge window
 pci 0000:50:00.0: can't claim BAR 16 [??? 0x00000000 flags 0x0]: no compatible bridge window
 pci_bus 0000:51: busn_res: [bus 51-ff] end is updated to 51
 pci 0000:50:00.0: BAR 16: [??? 0x00000000 flags 0x20000000] has bogus alignment
 pci 0000:50:00.1: BAR 0: assigned [mem 0xffffffff94000000-0xffffffff943fffff pref]
 pci 0000:50:00.0: BAR 14: assigned [mem 0xffffffff94400000-0xffffffff944fffff]
 pci 0000:50:00.0: BAR 15: assigned [mem 0xffffffff94500000-0xffffffff945fffff pref]
 pci 0000:50:00.1: BAR 6: assigned [mem 0xffffffff94600000-0xffffffff94607fff pref]
 pci 0000:50:00.0: PCI bridge to [bus 51]
 pci 0000:50:00.0:   bridge window [io  0x80000-0x80fff]
 pci 0000:50:00.0:   bridge window [mem 0xffffffff94400000-0xffffffff944fffff]
 pci 0000:50:00.0:   bridge window [mem 0xffffffff94500000-0xffffffff945fffff pref]

The patch below tries to improve the resource allocation.
Output is now:

 LBA 0:10: PCI host bridge to bus 0000:50
 pci_bus 0000:50: root bus resource [io  0x80000-0x8ffff] (bus address [0x0000-0xffff])
 pci_bus 0000:50: root bus resource [mem 0xffffffff94000000-0xffffffff95ffffff] (bus address [0x94000000-0x95ffffff])
 pci_bus 0000:50: root bus resource [bus 50-57]
 pci 0000:50:00.0: Changing bridge control from 0x00000000 to 0x00000023
 pci 0000:50:00.0: PCI bridge to [bus 51-ff]
 pci 0000:50:00.1: BAR 0: assigned [mem 0xffffffff94000000-0xffffffff943fffff pref]
 pci 0000:50:00.1: BAR 6: assigned [mem 0xffffffff94400000-0xffffffff94407fff pref]
 pci 0000:50:00.0: PCI bridge to [bus 51]
 pci 0000:50:00.0:   bridge window [io  0x80000-0x80fff]

Signed-off-by: Helge Deller <deller@gmx.de>
2017-08-24 18:46:44 +02:00
Helge Deller
cfe4fbfb23 parisc: Fix section mismatches in parisc core drivers
Signed-off-by: Helge Deller <deller@gmx.de>
2017-08-22 16:34:36 +02:00
Thomas Bogendoerfer
4098116039 parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo
For 64bit kernels the lmmio_space_offset of the host bridge window
isn't set correctly on systems with dino/cujo PCI host bridges.
This leads to not assigned memory bars and failing drivers, which
need to use these bars.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-08-16 09:50:39 +02:00
James Bottomley
93964fd4ea parisc: pdc_stable: Fix locking when creating sysfs links
There's no need to take the write lock when creating sysfs links.

This patch fixes the following BUG:
 BUG: sleeping function called from invalid context at mm/slab.h:416
 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc2-00110-g0b5477d9dabd #111
 Backtrace:
 [<0000000040217ac8>] show_stack+0x20/0x38
 [<00000000406fbbb0>] dump_stack+0xb0/0x128
 [<0000000040274090>] ___might_sleep+0x180/0x1b8
 [<0000000040274144>] __might_sleep+0x7c/0xe8
 [<0000000040373874>] kmem_cache_alloc+0x14c/0x1e0
 [<0000000040419514>] __kernfs_new_node+0x84/0x1b8
 [<000000004041b09c>] kernfs_new_node+0x3c/0x78
 [<000000004041e040>] kernfs_create_link+0x40/0xd8
 [<000000004041f320>] sysfs_do_create_link_sd.isra.0+0xb0/0x130
 [<000000004041f3d4>] sysfs_create_link+0x34/0x58
 [<000000004011b4a4>] pdc_stable_init+0x2c4/0x458
 [<0000000040200250>] do_one_initcall+0x70/0x1d8
 [<0000000040101644>] kernel_init_freeable+0x27c/0x390
 [<000000004020be44>] kernel_init+0x24/0x1c0

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-31 16:43:13 +02:00
Arvind Yadav
343fdfb7d0 parisc: pdc_stable: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-23 21:02:17 +02:00
Christoph Hellwig
227145eb38 parisc: ->mapping_error
DMA_ERROR_CODE already went away in linux-next, but parisc unfortunately
added a new instance of it without any review as far as I can tell.

Move the two iommu drivers to report errors through ->mapping_error.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-05 21:46:42 +02:00
Thomas Bogendoerfer
33f9e02495 parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
Enabling parport pc driver on a B2600 (and probably other 64bit PARISC
systems) produced following BUG:

CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e #156
task: 000000009e050000 task.stack: 000000009e04c000

     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001101111111100001111 Not tainted
r00-03  000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0
r04-07  0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200
r08-11  000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0
r12-15  0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0
r16-19  0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061
r20-23  000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40
r24-27  0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0
r28-31  0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000
sr00-03  0000000000000000 0000000000000000 0000000000000000 0000000000000000
sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4
 IIR: 03ffe01f    ISR: 0000000010340000  IOR: 000001781304cac8
 CPU:        0   CR30: 000000009e04c000 CR31: 00000000e2976de2
 ORIG_R28: 0000000000000200
 IAOQ[0]: sba_dma_supported+0x80/0xd0
 IAOQ[1]: sba_dma_supported+0x84/0xd0
 RP(r2): parport_pc_probe_port+0x178/0x1200

Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port,
which PARISC DMA API doesn't handle very nicely. This commit gives back
DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA
transaction.

Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-03 17:00:46 +02:00
Linus Torvalds
f47e2db43d Merge branch 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes and cleanups from Helge Deller:
 "Nothing really important in this patchset: fix resource leaks in error
  paths, coding style cleanups and code removal"

* 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Remove flush_user_dcache_range and flush_user_icache_range
  parisc: fix a printk
  parisc: ccio-dma: Handle return NULL error from ioremap_nocache
  parisc: Define access_ok() as macro
  parisc: eisa: Fix resource leaks in error paths
  parisc: eisa: Remove coding style errors
2017-03-03 16:20:06 -08:00
Ingo Molnar
3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Arvind Yadav
e28f701b21 parisc: ccio-dma: Handle return NULL error from ioremap_nocache
Fix error paths and return -ENOMEM instead of '1'.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-02-25 22:27:30 +01:00
Arvind Yadav
af640d17ec parisc: eisa: Fix resource leaks in error paths
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-02-25 22:21:21 +01:00
Arvind Yadav
99cde44edf parisc: eisa: Remove coding style errors
This patch removes coding style errors in the eisa driver.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-02-25 22:21:12 +01:00
Bart Van Assche
5299709d0a treewide: Constify most dma_map_ops structures
Most dma_map_ops structures are never modified. Constify these
structures such that these can be write-protected. This patch
has been generated as follows:

git grep -l 'struct dma_map_ops' |
  xargs -d\\n sed -i \
    -e 's/struct dma_map_ops/const struct dma_map_ops/g' \
    -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \
    -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \
    -e 's/const const struct dma_map_ops /const struct dma_map_ops /g';
sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \
  $(git grep -l 'struct dma_map_ops intel_dma_ops');
sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \
  $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc);
sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \
       -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \
       -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \
    drivers/pci/host/*.c
sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c
sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c
sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: x86@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24 12:23:35 -05:00
Linus Torvalds
7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Krzysztof Kozlowski
00085f1efa dma-mapping: use unsigned long for dma_attrs
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Linus Torvalds
63e30271b0 PCI changes for the v4.6 merge window:
Enumeration
     Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
     Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
 
   Resource management
     Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
     Don't assign or reassign immutable resources (Bjorn Helgaas)
     Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
     Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
     Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
     ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
     ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
     Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
     Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
     rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
     designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
 
   Virtualization
     Wait for up to 1000ms after FLR reset (Alex Williamson)
     Support SR-IOV on any function type (Kelly Zytaruk)
     Add ACS quirk for all Cavium devices (Manish Jaggi)
 
   AER
     Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
     Restore pci_ops pointer while calling original pci_ops (David Daney)
     Fix aer_inject error codes (Jean Delvare)
     Use dev_warn() in aer_inject (Jean Delvare)
     Log actual error causes in aer_inject (Jean Delvare)
     Log aer_inject error injections (Jean Delvare)
 
   VPD
     Prevent VPD access for buggy devices (Babu Moger)
     Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
     Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
     Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
     Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
     Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
     Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
     Update VPD definitions (Hannes Reinecke)
     Allow access to VPD attributes with size 0 (Hannes Reinecke)
     Determine actual VPD size on first access (Hannes Reinecke)
 
   Generic host bridge driver
     Move structure definitions to separate header file (David Daney)
     Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
     Expose pci_host_common_probe() for use by other drivers (David Daney)
 
   Altera host bridge driver
     Fix altera_pcie_link_is_up() (Ley Foon Tan)
 
   Cavium ThunderX host bridge driver
     Add PCIe host driver for ThunderX processors (David Daney)
     Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
 
   Freescale i.MX6 host bridge driver
     Add DT bindings to configure PHY Tx driver settings (Justin Waters)
     Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
     Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
     Remove broken Gen2 workaround (Lucas Stach)
     Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
 
   Freescale Layerscape host bridge driver
     Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
 
   Intel VMD host bridge driver
     Attach VMD resources to parent domain's resource tree (Jon Derrick)
     Set bus resource start to 0 (Keith Busch)
 
   Microsoft Hyper-V host bridge driver
     Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
     Look up IRQ domain by fwnode_handle (Jake Oshins)
     Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
 
   NVIDIA Tegra host bridge driver
     Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
     Implement ->{add,remove}_bus() callbacks (Thierry Reding)
     Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
     Track bus -> CPU mapping (Thierry Reding)
     Remove misleading PHYS_OFFSET (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
 
   Synopsys DesignWare host bridge driver
     ARC: Add PCI support (Joao Pinto)
     Add generic dw_pcie_wait_for_link() (Joao Pinto)
     Add default link up check if sub-driver doesn't override (Joao Pinto)
     Add driver for prototyping kits based on ARC SDP (Joao Pinto)
 
   TI Keystone host bridge driver
     Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
 
   Xilinx AXI host bridge driver
     Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
     Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
     Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
     Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
     microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
 
   Xilinx NWL host bridge driver
     Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
 
   Miscellaneous
     Check device_attach() return value always (Bjorn Helgaas)
     Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
     Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
     Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
     Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
     unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
     Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
     Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
     Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
     frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
     Move pci_dma_* helpers to common code (Christoph Hellwig)
     Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
     Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
     Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6XgMAAoJEFmIoMA60/r8Yq4P/1nNwwZPikU+9Z8k0HyGPll6
 vqXBOYj/wlbAxJTzH2weaoyUamFrwvsKaO3Vap3xHkAeTFPD/Dp0TipCCNMrZ82Z
 j1y83JJpenkRyX6ifLARCNYpOtvnvgzSrO9x7Sb2Xfqb64dPb7+jGAfOpGNzhKsO
 n1nj/L7RGx8Q6fNFGf8ANMXKTsdkdL+1pdwegjUXmD5WdOT+oW8DmqVbhyfSKwl0
 E8r4Ml2lIg7Qd5Wu5iKMIBsR0+5HEyrwV7ch92wXChwKfoRwG70qnn7FGdc0y5ZB
 XvJuj8UD5UeMxEUeoRa9SwU6wWQT3Q9e6BzMS+P+43z36SPYjMfy/Xffv054z/bY
 rQomLjuGxNLESpmfNK5JfKxWoe2YNXjHQIDWMrAHyNlwdKJbYiwPcxnZJhvOa/eB
 p0QYcGS7O43STjibG9PZhzeq8tuSJRshxi0W6iB9QlqO8qs8nJQxIO+sZj/vl4yz
 lSnswWcV9062KITl8Fe9xDw244/RTz1xSVCdldlSoDhJyeMOjRvzS8raUMyyVmbA
 YULsI3l2iCl+fwDm/T21o7hJG966oYdAmgEv7lc7BWfgEAMg//LZXvMzVvrPFB2D
 R77u/0idtOciVJrmnO/x9DnQO2hzro9SLmVH6m0+0YU4wSSpZfGn98PCrtkatOAU
 c8zT9dJgyJVE3Z7cnPJ4
 =otsF
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...
2016-03-16 14:45:55 -07:00
Bjorn Helgaas
e7e127e3c7 PCI: Include pci/hotplug Kconfig directly from pci/Kconfig
Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't
have to source both pci/Kconfig and pci/hotplug/Kconfig.

Note that this effectively adds pci/hotplug/Kconfig to the following
arches, because they already sourced drivers/pci/Kconfig but they
previously did not source drivers/pci/hotplug/Kconfig:

  alpha
  arm
  avr32
  frv
  m68k
  microblaze
  mn10300
  sparc
  unicore32

Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-08 15:10:48 -06:00
Toshi Kani
9a975bee4b drivers: Initialize resource entry to zero
I/O resource descriptor, 'desc' in struct resource, needs to be
initialized to zero by default.  Some drivers call kmalloc() to
allocate a resource entry, but do not initialize it to zero by
memset().  Change these drivers to call kzalloc(), instead.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Link: http://lkml.kernel.org/r/1453841853-11383-10-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-30 09:49:58 +01:00
Christoph Hellwig
79387179e2 parisc: convert to dma_map_ops
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Helge Deller
602c9c9a01 parisc: Initialize PCI bridge cache line and default latency
PCI controllers and pci-pci bridges may have not been fully initialized
regarding cache line and defaul latency.

This partly reverts
commit 5f0e9b4 ("parisc: Remove unused pcibios_init_bus()")

Signed-off-by: Helge Deller <deller@gmx.de>
2016-01-12 22:03:21 +01:00
Mikulas Patocka
e46e31a369 parisc iommu: fix panic due to trying to allocate too large region
When using the Promise TX2+ SATA controller on PA-RISC, the system often
crashes with kernel panic, for example just writing data with the dd
utility will make it crash.

Kernel panic - not syncing: drivers/parisc/sba_iommu.c: I/O MMU @ 000000000000a000 is out of mapping resources

CPU: 0 PID: 18442 Comm: mkspadfs Not tainted 4.4.0-rc2 #2
Backtrace:
 [<000000004021497c>] show_stack+0x14/0x20
 [<0000000040410bf0>] dump_stack+0x88/0x100
 [<000000004023978c>] panic+0x124/0x360
 [<0000000040452c18>] sba_alloc_range+0x698/0x6a0
 [<0000000040453150>] sba_map_sg+0x260/0x5b8
 [<000000000c18dbb4>] ata_qc_issue+0x264/0x4a8 [libata]
 [<000000000c19535c>] ata_scsi_translate+0xe4/0x220 [libata]
 [<000000000c19a93c>] ata_scsi_queuecmd+0xbc/0x320 [libata]
 [<0000000040499bbc>] scsi_dispatch_cmd+0xfc/0x130
 [<000000004049da34>] scsi_request_fn+0x6e4/0x970
 [<00000000403e95a8>] __blk_run_queue+0x40/0x60
 [<00000000403e9d8c>] blk_run_queue+0x3c/0x68
 [<000000004049a534>] scsi_run_queue+0x2a4/0x360
 [<000000004049be68>] scsi_end_request+0x1a8/0x238
 [<000000004049de84>] scsi_io_completion+0xfc/0x688
 [<0000000040493c74>] scsi_finish_command+0x17c/0x1d0

The cause of the crash is not exhaustion of the IOMMU space, there is
plenty of free pages. The function sba_alloc_range is called with size
0x11000, thus the pages_needed variable is 0x11. The function
sba_search_bitmap is called with bits_wanted 0x11 and boundary size is
0x10 (because dma_get_seg_boundary(dev) returns 0xffff).

The function sba_search_bitmap attempts to allocate 17 pages that must not
cross 16-page boundary - it can't satisfy this requirement
(iommu_is_span_boundary always returns true) and fails even if there are
many free entries in the IOMMU space.

How did it happen that we try to allocate 17 pages that don't cross
16-page boundary? The cause is in the function iommu_coalesce_chunks. This
function tries to coalesce adjacent entries in the scatterlist. The
function does several checks if it may coalesce one entry with the next,
one of those checks is this:

	if (startsg->length + dma_len > max_seg_size)
		break;

When it finishes coalescing adjacent entries, it allocates the mapping:

sg_dma_len(contig_sg) = dma_len;
dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
sg_dma_address(contig_sg) =
	PIDE_FLAG
	| (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT)
	| dma_offset;

It is possible that (startsg->length + dma_len > max_seg_size) is false
(we are just near the 0x10000 max_seg_size boundary), so the funcion
decides to coalesce this entry with the next entry. When the coalescing
succeeds, the function performs
	dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
And now, because of non-zero dma_offset, dma_len is greater than 0x10000.
iommu_alloc_range (a pointer to sba_alloc_range) is called and it attempts
to allocate 17 pages for a device that must not cross 16-page boundary.

To fix the bug, we must make sure that dma_len after addition of
dma_offset and alignment doesn't cross the segment boundary. I.e. change
	if (startsg->length + dma_len > max_seg_size)
		break;
to
	if (ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > max_seg_size)
		break;

This patch makes this change (it precalculates max_seg_boundary at the
beginning of the function iommu_coalesce_chunks). I also added a check
that the mapping length doesn't exceed dma_get_seg_boundary(dev) (it is
not needed for Promise TX2+ SATA, but it may be needed for other devices
that have dma_get_seg_boundary lower than dma_get_max_seg_size).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
2015-12-12 16:07:25 +01:00
Christoph Hellwig
247e75dba6 pci: remove pci_dma_supported
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 16:32:11 -08:00
Helge Deller
b696e5e938 parisc: reduce syslog debug output
Signed-off-by: Helge Deller <deller@gmx.de>
2015-10-22 15:45:18 +02:00
Bjorn Helgaas
237865f195 PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
Revert dff22d2054 ("PCI: Call pci_read_bridge_bases() from core instead
of arch code").

Reading PCI bridge windows is not arch-specific in itself, but there is PCI
core code that doesn't work correctly if we read them too early.  For
example, Hannes found this case on an ARM Freescale i.mx6 board:

  pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
  pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window)
  pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000]
  pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000]
  pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100]

The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs
0x204100 of space, and mem windows are megabyte-aligned.

Bus sizing can increase a bridge window size, but never *decrease* it (see
d65245c329 ("PCI: don't shrink bridge resources")).  Prior to
dff22d2054, ARM didn't read bridge windows at all, so the "original size"
was zero, and we assigned a 3MB window.

After dff22d2054, we read the bridge windows before sizing the bus.  The
firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since
we never decrease the size, we kept 16MB even though we only needed 3MB.
But 16MB doesn't fit in the host bridge aperture, so we failed to assign
space for the window and the downstream devices.

I think this is a defect in the PCI core: we shouldn't rely on the firmware
to assign sensible windows.

Ray reported a similar problem, also on ARM, with Broadcom iProc.

Issues like this are too hard to fix right now, so revert dff22d2054.

Reported-by: Hannes <oe5hpm@gmail.com>
Reported-by: Ray Jui <rjui@broadcom.com>
Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com
Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-09-15 13:18:04 -05:00
Andy Shevchenko
b342a65dd7 parisc: use seq_hex_dump() to dump buffers
Instead of custom approach let's use recently introduced seq_hex_dump()
helper.

In one case it changes the output from
	1111111122222222333333334444444455555555666666667777777788888888
to
	11111111 22222222 33333333 44444444 55555555 66666666 77777777 88888888

though it seems it prints same data (by meaning) in both cases.  I decide
to choose to use the space divided one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Tadeusz Struk <tadeusz.struk@intel.com>
Cc: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 13:29:01 -07:00
Helge Deller
e02a653e15 PCI,parisc: Enable 64-bit bus addresses on PA-RISC
Commit 3a9ad0b ("PCI: Add pci_bus_addr_t") unconditionally introduced usage of
64-bit PCI bus addresses on all 64-bit platforms which broke PA-RISC.

It turned out that due to enabling the 64-bit addresses, the PCI logic decided
to use the GMMIO instead of the LMMIO region. This commit simply disables
registering the GMMIO and thus we fall back to use the LMMIO region as before.

Reverts commit 45ea2a5fed
("PCI: Don't use 64-bit bus addresses on PA-RISC")

To: linux-parisc@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Meelis Roos <mroos@linux.ee>
Cc: stable@vger.kernel.org  # v3.19+
Signed-off-by: Helge Deller <deller@gmx.de>
2015-09-08 15:30:47 +02:00
Linus Torvalds
17e6b00ac4 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "This updated pull request does not contain the last few GIC related
  patches which were reported to cause a regression.  There is a fix
  available, but I let it breed for a couple of days first.

  The irq departement provides:

   - new infrastructure to support non PCI based MSI interrupts
   - a couple of new irq chip drivers
   - the usual pile of fixlets and updates to irq chip drivers
   - preparatory changes for removal of the irq argument from interrupt
     flow handlers
   - preparatory changes to remove IRQF_VALID"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
  irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
  irqchip: Add documentation for the bcm2836 interrupt controller
  irqchip/bcm2835: Add support for being used as a second level controller
  irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
  PCI: xilinx: Fix typo in function name
  irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
  irqchip/gic: Only allow the primary GIC to set the CPU map
  PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
  unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
  tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
  m68k/irq: Prepare irq handlers for irq argument removal
  C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
  blackfin: Prepare irq handlers for irq argument removal
  arc/irq: Prepare idu_cascade_isr for irq argument removal
  sparc/irq: Use access helper irq_data_get_affinity_mask()
  sparc/irq: Use helper irq_data_get_irq_handler_data()
  parisc/irq: Use access helper irq_data_get_affinity_mask()
  mn10300/irq: Use access helper irq_data_get_affinity_mask()
  irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
  ...
2015-09-01 14:33:35 -07:00
Jiang Liu
d2109a1219 parisc/irq: Use access helper irq_data_get_affinity_mask()
Use access helper irq_data_get_affinity_mask() to hide implementation
details of struct irq_desc.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Link: http://lkml.kernel.org/r/1433145945-789-24-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-31 22:20:04 +02:00
Lorenzo Pieralisi
dff22d2054 PCI: Call pci_read_bridge_bases() from core instead of arch code
When we scan a PCI bus, we read PCI-PCI bridge window registers with
pci_read_bridge_bases() so we can validate the resource hierarchy.  Most
architectures call pci_read_bridge_bases() from pcibios_fixup_bus(), but
PCI-PCI bridges are not arch-specific, so this doesn't need to be in
arch-specific code.

Call pci_read_bridge_bases() directly from the PCI core instead of from
arch code.

For alpha and mips, we now call pci_read_bridge_bases() always; previously
we only called it if PCI_PROBE_ONLY was set.

[bhelgaas: changelog]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: James E.J. Bottomley <jejb@parisc-linux.org>
CC: Michael Ellerman <mpe@ellerman.id.au>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: David Howells <dhowells@redhat.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Tony Luck <tony.luck@intel.com>
CC: David S. Miller <davem@davemloft.net>
CC: Ingo Molnar <mingo@redhat.com>
CC: Guenter Roeck <linux@roeck-us.net>
CC: Michal Simek <monstr@monstr.eu>
CC: Chris Zankel <chris@zankel.net>
2015-07-23 10:13:29 -05:00
Scott Wood
a4e4f67f41 parisc: %pf is only for function pointers
Use %ps for actual addresses, otherwise you'll get bad output
on arches like parisc64 where %pf expects a function descriptor.

This wasn't normally seen on parisc64 because the code is not built
unless DEBUG_SUPERIO_INIT is manually defined.

Patch modified by Helge Deller to utilize KERN_DEBUG.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: linux-parisc@vger.kernel.org
cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2015-04-24 13:45:54 +02:00
Matthew Wilcox
8bf8a1d1c1 parisc: Eliminate sg_virt_addr() and private scatterlist.h
The only reason to keep parisc's private asm/scatterlist.h was that it
had the macro sg_virt_addr().  Convert all callers to use something else
(sometimes just sg->offset was enough, others should use sg_virt()), and
we can just use the asm-generic scatterlist.h instead.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2015-04-21 22:02:43 +02:00
Joe Perches
e693d73c20 parisc: remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:25 -07:00
Linus Torvalds
d0bbe0dd35 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Usual trivial tree updates.  Nothing outstanding -- mostly printk()
  and comment fixes and unused identifier removals"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  goldfish: goldfish_tty_probe() is not using 'i' any more
  powerpc: Fix comment in smu.h
  qla2xxx: Fix printks in ql_log message
  lib: correct link to the original source for div64_u64
  si2168, tda10071, m88ds3103: Fix firmware wording
  usb: storage: Fix printk in isd200_log_config()
  qla2xxx: Fix printk in qla25xx_setup_mode
  init/main: fix reset_device comment
  ipwireless: missing assignment
  goldfish: remove unreachable line of code
  coredump: Fix do_coredump() comment
  stacktrace.h: remove duplicate declaration task_struct
  smpboot.h: Remove unused function prototype
  treewide: Fix typo in printk messages
  treewide: Fix typo in printk messages
  mod_devicetable: fix comment for match_flags
2015-04-14 09:50:27 -07:00
Masanari Iida
d939be3add treewide: Fix typo in printk messages
This patch fix spelling typo in printk messages.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-06 23:05:39 +01:00
Yinghai Lu
2e5e804a83 parisc/PCI: Clip bridge windows to fit in upstream windows
Every PCI-PCI bridge window should fit inside an upstream bridge window
because orphaned address space is unreachable from the primary side of the
upstream bridge.  If we inherit invalid bridge windows that overlap an
upstream window from firmware, clip them to fit and update the bridge
accordingly.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491
Reported-by: Marek Kordik <kordikmarek@gmail.com>
Fixes: 5b28541552 ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: "James E.J. Bottomley" <jejb@parisc-linux.org>
CC: Helge Deller <deller@gmx.de>
CC: linux-parisc@vger.kernel.org
2015-01-16 10:04:43 -06:00
Linus Torvalds
faafcba3b5 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
     Hansen)

   - Various sched/idle refinements for better idle handling (Nicolas
     Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)

   - sched/numa updates and optimizations (Rik van Riel)

   - sysbench speedup (Vincent Guittot)

   - capacity calculation cleanups/refactoring (Vincent Guittot)

   - Various cleanups to thread group iteration (Oleg Nesterov)

   - Double-rq-lock removal optimization and various refactorings
     (Kirill Tkhai)

   - various sched/deadline fixes

  ... and lots of other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
  sched/fair: Delete resched_cpu() from idle_balance()
  sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
  sched: Improve sysbench performance by fixing spurious active migration
  sched/x86: Fix up typo in topology detection
  x86, sched: Add new topology for multi-NUMA-node CPUs
  sched/rt: Use resched_curr() in task_tick_rt()
  sched: Use rq->rd in sched_setaffinity() under RCU read lock
  sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
  sched: Use dl_bw_of() under RCU read lock
  sched/fair: Remove duplicate code from can_migrate_task()
  sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
  sched: print_rq(): Don't use tasklist_lock
  sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
  sched: Fix the task-group check in tg_has_rt_tasks()
  sched/fair: Leverage the idle state info when choosing the "idlest" cpu
  sched: Let the scheduler see CPU idle states
  sched/deadline: Fix inter- exclusive cpusets migrations
  sched/deadline: Clear dl_entity params when setscheduling to different class
  sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
  ...
2014-10-13 16:23:15 +02:00
Helge Deller
3edfe0030b parisc: Fix serial console for machines with serial port on superio chip
Fix the serial console on machines where the serial port is located on
the SuperIO chip.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Peter Hurley <peter@hurleysoftware.com>
2014-10-01 22:12:50 +02:00
Helge Deller
c735483de1 parisc: pdc_stable.c: Avoid potential stack overflows
Signed-off-by: Helge Deller <deller@gmx.de>
2014-09-21 22:31:08 +02:00
Rickard Strandqvist
94c457deff parisc: pdc_stable.c: Cleaning up unnecessary use of memset in conjunction with strncpy
Using memset before strncpy just to ensure a trailing null character is
an unnecessary double writing of a string

Patch modified by Helge Deller to additionally reduce stack usage.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Helge Deller <deller@gmx.de>
2014-09-21 21:07:48 +02:00
Kirill Tkhai
f139caf2e8 sched, cleanup, treewide: Remove set_current_state(TASK_RUNNING) after schedule()
schedule(), io_schedule() and schedule_timeout() always return
with TASK_RUNNING state set, so one more setting is unnecessary.

(All places in patch are visible good, only exception is
 kiblnd_scheduler() from:

      drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c

 Its schedule() is one line above standard 3 lines of unified diff)

No places where set_current_state() is used for mb().

Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1410529254.3569.23.camel@tkhai
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Anil Belur <askb23@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Howells <dhowells@redhat.com>
Cc: Dmitry Eremin <dmitry.eremin@intel.com>
Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Isaac Huang <he.huang@intel.com>
Cc: James E.J. Bottomley <JBottomley@parallels.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Liang Zhen <liang.zhen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masaru Nomura <massa.nomura@gmail.com>
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleg Drokin <green@linuxhacker.ru>
Cc: Peng Tao <bergwolf@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Ursula Braun <ursula.braun@de.ibm.com>
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Cc: devel@driverdev.osuosl.org
Cc: dm-devel@redhat.com
Cc: dri-devel@lists.freedesktop.org
Cc: fcoe-devel@open-fcoe.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-afs@lists.infradead.org
Cc: linux-cris-kernel@axis.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-nfs@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-raid@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: qla2xxx-upstream@qlogic.com
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: user-mode-linux-user@lists.sourceforge.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-19 12:35:17 +02:00
Hans Wennborg
3335f75a88 parisc: dino: fix %d confusingly prefixed with 0x in format string
Signed-off-by: Hans Wennborg <hans@hanshq.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2014-08-27 14:35:04 +02:00
Linus Torvalds
a923874198 PCI changes for the v3.12 merge window:
PCI device hotplug
     - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
     - Assign resources on per-host bridge basis (Yinghai Lu)
 
   MPS (Max Payload Size)
     - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
     - Add warnings about unsafe MPS settings (Yijing Wang)
     - Simplify interface and messages (Bjorn Helgaas)
 
   SR-IOV
     - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
     - Update NumVFs register when disabling SR-IOV (Yijing Wang)
 
   Virtualization
     - Add bus and slot reset support (Alex Williamson)
     - Fix ACS (Access Control Services) issues (Alex Williamson)
 
   Miscellaneous
     - Simplify PCIe Capability accessors (Bjorn Helgaas)
     - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
     - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
     - Delay enabling bridges until they're needed (Yinghai Lu)
     - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
     - Convert class code to use dev_groups (Greg Kroah-Hartman)
     - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
     - Fix bridge I/O window alignment (Bjorn Helgaas)
     - Add pci_wait_for_pending_transaction() (Casey Leedom)
     - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJiBcAAoJEFmIoMA60/r8xJgQAJML7aDmo3ASfabGrfY12fUR
 10Miud/MzlX8/AjPSVW0BodpPMmyQY/Viqd9nBWVm3OR9JSrBp2Q8a3Qge5c0GsE
 dMpO3bJrjOmexaAP3wqEQ/NNyL+iIO7fVQsjHf0uyYTS359Ed0TMWsLQwjAa+h2d
 bB2Ul1AqNiXywCj8Kxnzz52DLnRn1g2YVwp7hACCXyQ+NDVDqhgbxLBnbEFkQqOr
 jAF38xz6DuyVTF+EzIIUDWsOLuo5s0qC3aai36yrVwUuuppBFFX4QRoUOaerZRwe
 2WCSa8jqI5QnOPU0LYIPr24DJa6LKCtuSJXUE5hKZgz70UsNefRkV3F5lzB/YlXt
 t5PYH9B27fEyokh8gGmyytAKkutbm8RH3+99cjNzf/UKuiJgzZE27qi3A+DEpJft
 Igl4WoIC39/fhDSvmpGfd7BWvEkdz86UKdB9f7Wz6+NpWoDLiYiwqkOGuF0bo7zo
 3vH48s5VAR8avyGeSUPGFcP9Bq+Hi936xzZxq+Hrj0hASPTpOMTLD1XCqomONO26
 x6x0ipHRDTh3TixHN7KENqyIJCkY/vlzt4kDnzytZe4TupJX+hlG74fq98hpoEFy
 y2RPiLB8jahPf+fr4cmltqiv6WAhcUcJuGdcAF+Ht4wlrIDELR8e7AKH4Q04B/5O
 I8FCB6bay8mvW6MMSXql
 =uNEk
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...
2013-09-03 16:24:35 -07:00
Thomas Bogendoerfer
dd5e6d6a3d parisc: Fix interrupt routing for C8000 serial ports
We can't use dev->mod_index for selecting the interrupt routing entry,
because it's not an index into interrupt routing table. It will be even
wrong on a machine with 2 CPUs (4 cores). But all needed information is
contained in the PAT entries for the serial ports. mod[0] contains the
iosapic address and mod_info has some indications for the interrupt
input (at least it looks like it). This patch implements the searching
for the right iosapic and uses this interrupt input information.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: Helge Deller <deller@gmx.de>
2013-07-31 23:42:32 +02:00
Yinghai Lu
928bea9648 PCI: Delay enabling bridges until they're needed
We currently enable PCI bridges after scanning a bus and assigning
resources.  This is often done in arch code.

This patch changes this so we don't enable a bridge until necessary, i.e.,
until we enable a PCI device behind the bridge.  We do this in the generic
pci_enable_device() path, so this also removes the arch-specific code to
enable bridges.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-25 12:35:03 -06:00
Helge Deller
dac76f1be5 parisc: fix LMMIO mismatch between PAT length and MASK register
The LMMIO length reported by PAT and the length given by the LBA MASK
register are not consistent. This leads e.g. to a not-working ATI FireGL
card with the radeon DRM driver since the memory can't be mapped.

Fix this by correctly adjusting the resource sizes.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 3.10
2013-07-09 22:09:16 +02:00
Linus Torvalds
790eac5640 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second set of VFS changes from Al Viro:
 "Assorted f_pos race fixes, making do_splice_direct() safe to call with
  i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
  ->d_hash/->d_compare calling conventions changes from Linus, misc
  stuff all over the place."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  Document ->tmpfile()
  ext4: ->tmpfile() support
  vfs: export lseek_execute() to modules
  lseek_execute() doesn't need an inode passed to it
  block_dev: switch to fixed_size_llseek()
  cpqphp_sysfs: switch to fixed_size_llseek()
  tile-srom: switch to fixed_size_llseek()
  proc_powerpc: switch to fixed_size_llseek()
  ubi/cdev: switch to fixed_size_llseek()
  pci/proc: switch to fixed_size_llseek()
  isapnp: switch to fixed_size_llseek()
  lpfc: switch to fixed_size_llseek()
  locks: give the blocked_hash its own spinlock
  locks: add a new "lm_owner_key" lock operation
  locks: turn the blocked_list into a hashtable
  locks: convert fl_link to a hlist_node
  locks: avoid taking global lock if possible when waking up blocked waiters
  locks: protect most of the file_lock handling with i_lock
  locks: encapsulate the fl_link list handling
  locks: make "added" in __posix_lock_file a bool
  ...
2013-07-03 09:10:19 -07:00
Al Viro
747977976b eisa_eeprom: switch to fixed_size_llseek()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:57:29 +04:00
Thomas Bogendoerfer
9a66d1869d parisc: fix serial ports on C8000 workstation
The C8000 workstation (64 bit kernel only) has a somewhat different
serial port configuration than other models.
Thomas Bogendoerfer sent a patch to fix this in September 2010, which
was now minimally modified by me.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-06-18 20:29:07 +02:00
Helge Deller
b204a4d2d4 parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2)
commit dc7dce280a
Author: Bjorn Helgaas <bhelgaas@google.com>
Date:   Fri Oct 28 16:27:27 2011 -0600
   parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus
                    resources

  Supply root bus resources to pci_create_root_bus() so they're correct
  immediately.  This fixes the problem of "early" and "header" quirks seeing
  incorrect root bus resources.

added tests for elmmio_space.start while it should use
elmmio_space.flags.  This for example led to incorrect resource
assignments and a non-working stifb framebuffer on most parisc machines.

LBA 10:1: PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [io  0x12000-0x13fff] (bus address [0x2000-0x3fff])
pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff])
pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff])
pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0]

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-01 14:44:25 +02:00