Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards. Not using #ifdef guards means that the code is
always compiled independently of any Kconfig option, and thanks to that
bugs and regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220628193449.160585-7-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use the new LATE_SYSTEM_SLEEP_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards. Not using #ifdef guards means that the code is
always compiled independently of any Kconfig option, and thanks to that
bugs and regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220628193449.160585-6-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards. Not using #ifdef guards means that the code is
always compiled independently of any Kconfig option, and thanks to that
bugs and regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220628193449.160585-5-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards. Not using #ifdef guards means that the code is
always compiled independently of any Kconfig option, and thanks to that
bugs and regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220628193449.160585-4-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards. Not using #ifdef guards means that the code is
always compiled independently of any Kconfig option, and thanks to that
bugs and regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220628193449.160585-3-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards. Not using #ifdef guards means that the code is
always compiled independently of any Kconfig option, and thanks to that
bugs and regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220628193449.160585-2-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The RTL9310 SoC series has a watchdog timer identical to the already
supported SoCs. The peripheral is memory mapped at 0x18003260 and driven
by the Lexra bus clock.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/629e95e16c8dc812dc5a4ea34a2e2e1ff2faf88c.1656356377.git.sander@svanheule.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Support arm CMSDK ip apb watchdog device.
Description details of this device can be found in the
document DDI0479D_m_class_processor_system_r1p1_trm.pdf
on the arm's document web. Which periphid is 0x001bb824.
The registers are basically the same as the 805, just a
few more: Periphid4/5/6/7 with offset 0xFD0/0xFD4/0xFD8/0xFDC.
For the register description of arm,sp805, please refer
to the document DDI0270-arm-sp805.pdf.
Signed-off-by: Bing Fan <tombinfan@tencent.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1656037482-19505-1-git-send-email-hptsfb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Unlike release_mem_region(), a call to release_resource() does not
free the resource, so it has to be freed explicitly to avoid a memory
leak.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 0578fff4aa ("Watchdog: sp5100_tco: Add initialization using EFCH MMIO")
Cc: Terry Bowman <terry.bowman@amd.com>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220621152840.420a0f4c@endymion.delvare
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
My Bootlin address is preferred from now on.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
https://lore.kernel.org/r20220603155727.1232061-6-luca@lucaceresoli.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.
Fixes: 27e0fe00a5 ("watchdog: f71808e_wdt: refactor to platform device/driver pair")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
https://lore.kernel.org/r/20220526080303.1005063-1-jiasheng@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request,
or that came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including
a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE.
-----BEGIN PGP SIGNATURE-----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=2qok
-----END PGP SIGNATURE-----
Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went through
several rebases before the merge window as bugs were found, so they
remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files.
-----BEGIN PGP SIGNATURE-----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=cnSb
-----END PGP SIGNATURE-----
Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() in some error paths.
Fixes: bf90063999 ("watchdog: ts4800: add driver for TS-4800 watchdog")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220511114203.47420-1-linmq006@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This is a driver for the standard WDT on the RZ/N1 devices. This WDT has
very limited timeout capabilities. However, it can reset the device.
To do so, the corresponding bits in the SysCtrl RSTEN register need to
be enabled. This is not done by this driver.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220427135531.708279-3-jjhiblot@traphandler.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Test shows that wachdog still reboots machine after the module
is removed. Use watchdog_stop_on_unregister to stop the watchdog
on removing.
Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
eviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1650984810-6247-4-git-send-email-liuxp11@chinatelecom.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Executing reboot command several times on the machine "Dell
PowerEdge R740", UEFI security detection stopped machine
with the following prompt:
UEFI0082: The system was reset due to a timeout from the watchdog
timer. Check the System Event Log (SEL) or crash dumps from
Operating Sysstem to identify the source that triggered the
watchdog timer reset. Update the firmware or driver for the
identified device.
iDRAC has warning event: "The watchdog timer reset the system".
This patch fixes this issue by adding the reboot notifier.
Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1650984810-6247-3-git-send-email-liuxp11@chinatelecom.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If max_hw_heartbeat_ms is provided, the configured maximum timeout is not
limited by it. The limit check in this driver therefore doesn't make much
sense. Similar, the watchdog core ensures that minimum timeout limits are
met if min_hw_heartbeat_ms is set. Using watchdog_timeout_invalid() makes
more sense because it takes this into account.
Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1650984810-6247-2-git-send-email-liuxp11@chinatelecom.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
For power management, SET_NOIRQ_SYSTEM_SLEEP_PM_OPS defined for
CONFIG_PM_SLEEP, will point ->suspend_noirq, ->freeze_noirq and
->poweroff_noirq to the same function. Vice versa happens for
->resume_noirq, ->thaw_noirq and ->restore_noirq.
Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1650967905-3199-1-git-send-email-liuxp11@chinatelecom.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.
Fixes: 2d63908bdb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220412070824.23708-1-linmq006@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This ensures that the same value is read back as was eventually
programmed when using seconds as accuracy. Even then, comparing the more
precise heartbeat_ms against heartbeat in seconds will almost never
provide a match and will needlessly raise a warning. Fix by comparing
apples to apples.
Tested in combination with U-Boot as watchdog starter.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/6a4b54ac-9588-e172-c4c7-b91d524a851e@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Disable the watchdog if it is active while removing the module.
It is necessary in order to prevent a reset in case watchdog
hw was running before the removal.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220414054233.1357-2-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Optionally disable watchdog during suspend (if enabled) and re-enable
it upon resume.
This enables boards to sleep without being interrupted by the watchdog.
This patch is based on commit f6c98b0838 ("watchdog: da9062: add
power management ops") and commit 8541673d2a ("watchdog: da9062: fix
power management ops") and brings the same functionality to DA9063.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Adam Thomson <DLG-Adam.Thomson.Opensource@dm.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220422072713.3172345-2-primoz.fiser@norik.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for the HPE GXP Watchdog. The GXP asic contains a full
complement of timers one of which is the watchdog timer. The watchdog
timer is 16 bit and has 10ms resolution. The watchdog is created as a
child device of timer since the same register range is used.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
This patch adds support for set_timeout callback.
Once WDT is started, the WDT cycle setting register(WDTSET) can be updated
only after issuing a module reset. Otherwise, it will ignore the writes
and will hold the previous value. This patch updates the WDTSET register
if it is active.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-8-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This patch uses the force reset(WDTRSTB) for triggering WDT reset for
restart callback. This method(ie, Generate Reset (WDTRSTB) Signal on
parity error)is faster compared to the overflow method for triggering
watchdog reset.
Overflow method:
reboot: Restarting system
Reboot failed -- System halted
NOTICE: BL2: v2.5(release):v2.5/rzg2l-1.00-27-gf48f1440c
Parity error method:
reboot: Restarting system
NOTICE: BL2: v2.5(release):v2.5/rzg2l-1.00-27-gf48f1440c
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-7-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If reset_control_deassert() fails, then we won't be able to
access the device registers. Therefore check the return code of
reset_control_deassert() and bailout in case of error.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-6-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Both rzg2l_wdt_probe() and rzg2l_wdt_start() calls reset_control_
deassert() which results in a reset control imbalance.
This patch fixes reset control imbalance by removing reset_control_
deassert() from rzg2l_wdt_start() and replaces reset_control_assert with
reset_control_reset in rzg2l_wdt_stop() as watchdog module can be stopped
only by a module reset. This change will allow us to restart WDT after
stop() by configuring WDT timeout and enable registers.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-5-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Both rzg2l_wdt_probe() and rzg2l_wdt_start() calls pm_runtime_get() which
results in a usage counter imbalance. This patch fixes this issue by
removing pm_runtime_get() call from probe.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The value of timer_cycle_us can be 0 due to 32bit overflow.
For eg:- If we assign the counter value "0xfff" for computing
maxval.
This patch fixes this issue by appending ULL to 1024, so that
it is promoted to 64bit.
This patch also fixes the warning message, 'watchdog: Invalid min and
max timeout values, resetting to 0!'.
Fixes: 2cbc5cd0b5 ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220225175320.11041-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
A new "compatible" value has been added in the commit 17fffe91ba
("dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding").
It's meant to be used for BCM63xx SoCs family but hardware block can be
programmed just like the 7038 one.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220216063408.23168-1-zajec5@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Rather than relying on machine specific headers to
pass down the reboot status and the register locations,
use resources and platform_data.
Aside from this, keep the changes to a minimum.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: linux-watchdog@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mach/hardware.h is included in lots of places, and it provides
three different things on pxa:
- the cpu_is_pxa* macros
- an indirect inclusion of mach/addr-map.h
- the __REG() and io_pv2() helper macros
Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h
headers, then change all the files that use mach/hardware.h to
include the exact set of those three headers that they actually
need, allowing for further more targeted cleanup.
linux/soc/pxa/cpu.h can remain permanently exported and is now in
a global location along with similar headers. pxa-regs.h and
addr-map.h are only used in a very small number of drivers now
and can be moved to arch/arm/mach-pxa/ directly when those drivers
are to pass the necessary data as resources.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmJF7qQACgkQ+iyteGJfRsowRQCeOfozOBwouAz4tVIERCaYgril
D6sAn34jNnuYybj4YtEIBRCHWfbG6GsQ
=oHoS
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add support for BCM4908
- renesas_wdt: add R-Car Gen4 support
- improve watchdog_dev function documentation
- sp5100_tco: replace the cd6h/cd7h port I/O with MMIO accesses during
initialization
- several other small improvements and fixes
* tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
Watchdog: sp5100_tco: Enable Family 17h+ CPUs
Watchdog: sp5100_tco: Add initialization using EFCH MMIO
Watchdog: sp5100_tco: Refactor MMIO base address initialization
Watchdog: sp5100_tco: Move timer initialization into function
watchdog: ixp4xx: Implement restart
watchdog: orion_wdt: support pretimeout on Armada-XP
watchdog: allow building BCM7038_WDT for BCM4908
watchdog: renesas_wdt: Add R-Car Gen4 support
dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
watchdog: Improve watchdog_dev function documentation
watchdog: aspeed: add nowayout support
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
watchdog: imx2_wdg: Alow ping on suspend
The driver currently uses a CPU family match of 17h to determine
EFCH_PM_DECODEEN_WDT_TMREN register support. This family check will not
support future AMD CPUs and instead will require driver updates to add
support.
Remove the family 17h family check and add a check for SMBus PCI
revision ID 0x51 or greater. The MMIO access method has been available
since at least SMBus controllers using PCI revision 0x51. This revision
check will support family 17h and future AMD processors including EFCH
functionality without requiring driver changes.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-5-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
cd6h/cd7h port I/O can be disabled on recent AMD hardware. Read
accesses to disabled cd6h/cd7h port I/O will return F's and written
data is dropped. It is recommended to replace the cd6h/cd7h
port I/O with MMIO.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-4-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Combine MMIO base address and alternate base address detection. Combine
based on layout type. This will simplify the function by eliminating
a switch case.
Move existing request/release code into functions. This currently only
supports port I/O request/release. The move into a separate function
will make it ready for adding MMIO region support.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-3-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Refactor driver's timer initialization into new function. This is needed
inorder to support adding new device layouts while using common timer
initialization.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-2-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Commit e07a4c79ca ("watchdog: orion_wdt: use timer1 as a pretimeout")
added support for a pretimeout on Armada-38x variants. Because the
Armada-XP variants use armada370_start/armada370_stop (due to missing an
explicit RSTOUT mask bit for the watchdog). Add the required pretimeout
support to armada370_start/armada370_stop for Armada-XP.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220211003257.2037332-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx
including the watchdog block. Allow building this driver for it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add the compatible string for the R-Car Gen4 family.
No further driver changes are needed.
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/cc395105e1d34aab2c076d368c0737833970b9d2.1642525158.git.geert+renesas@glider.be
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Adjust function comments to the kernel doc format. It
also adjusts some variable names and adds return values.
No functional change.
Changes from V1:
Change "Returns" to "Return:" (Randy Dunlap)
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/30378a03e9cd9b5f6e92ec9bf512edc38bad8627.1644589712.git.bristot@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for not stopping the watchdog
when the userspace application quits. At
closing of the device, the driver cannot
determine if this was a graceful closure
or if the app crashed. If the support
of nowayout on this driver, the system integrator
can select the behaviour by setting the kernel
config and enabling it.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org> (maintainer:WATCHDOG DEVICE DRIVERS)
Cc: Guenter Roeck <linux@roeck-us.net> (maintainer:WATCHDOG DEVICE DRIVERS)
Cc: Joel Stanley <joel@jms.id.au> (supporter:ARM/ASPEED MACHINE SUPPORT)
Cc: Andrew Jeffery <andrew@aj.id.au> (reviewer:ARM/ASPEED MACHINE SUPPORT)
Cc: linux-watchdog@vger.kernel.org (open list:WATCHDOG DEVICE DRIVERS)
Cc: linux-arm-kernel@lists.infradead.org (moderated list:ARM/ASPEED MACHINE SUPPORT)
Cc: linux-aspeed@lists.ozlabs.org (moderated list:ARM/ASPEED MACHINE SUPPORT)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: Eduardo Valentin <evalenti@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220212021033.2344-1-eduval@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: 2d63908bdb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220105092114.23932-1-linmq006@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
