mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 18:14:48 +08:00
222 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Pasha Tatashin
|
9d85731110 |
mm: don't account memmap per-node
Fix invalid access to pgdat during hot-remove operation:
ndctl users reported a GPF when trying to destroy a namespace:
$ ndctl destroy-namespace all -r all -f
Segmentation fault
dmesg:
Oops: general protection fault, probably for
non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN
PTI
KASAN: probably user-memory-access in range
[0x000000000002b280-0x000000000002b287]
CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1
Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS
2.20.1 09/13/2023
RIP: 0010:mod_node_page_state+0x2a/0x110
cxl-test users report a GPF when trying to unload the test module:
$ modrpobe -r cxl-test
dmesg
BUG: unable to handle page fault for address: 0000000000004200
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 #197
Tainted: [O]=OOT_MODULE, [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15
RIP: 0010:mod_node_page_state+0x6/0x90
Currently, when memory is hot-plugged or hot-removed the accounting is
done based on the assumption that memmap is allocated from the same node
as the hot-plugged/hot-removed memory, which is not always the case.
In addition, there are challenges with keeping the node id of the memory
that is being remove to the time when memmap accounting is actually
performed: since this is done after remove_pfn_range_from_zone(), and
also after remove_memory_block_devices(). Meaning that we cannot use
pgdat nor walking though memblocks to get the nid.
Given all of that, account the memmap overhead system wide instead.
For this we are going to be using global atomic counters, but given that
memmap size is rarely modified, and normally is only modified either
during early boot when there is only one CPU, or under a hotplug global
mutex lock, therefore there is no need for per-cpu optimizations.
Also, while we are here rename nr_memmap to nr_memmap_pages, and
nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the
units are in page count.
[pasha.tatashin@soleen.com: address a few nits from David Hildenbrand]
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com
Fixes:
|
||
Wei Yang
|
861dd8b9e3 |
mm/sparse: nr_pages won't be 0
Function subsection_map_init() is only used in free_area_init() in the loop of for_each_mem_pfn_range(). And we are sure in each iteration of for_each_mem_pfn_range(), start_pfn < end_pfn. So nr_pages is not possible to be 0 and we can remove the check. Link: https://lkml.kernel.org/r/20240619010612.20740-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Sourav Panda
|
15995a3524 |
mm: report per-page metadata information
Today, we do not have any observability of per-page metadata and how much it takes away from the machine capacity. Thus, we want to describe the amount of memory that is going towards per-page metadata, which can vary depending on build configuration, machine architecture, and system use. This patch adds 2 fields to /proc/vmstat that can used as shown below: Accounting per-page metadata allocated by boot-allocator: /proc/vmstat:nr_memmap_boot * PAGE_SIZE Accounting per-page metadata allocated by buddy-allocator: /proc/vmstat:nr_memmap * PAGE_SIZE Accounting total Perpage metadata allocated on the machine: (/proc/vmstat:nr_memmap_boot + /proc/vmstat:nr_memmap) * PAGE_SIZE Utility for userspace: Observability: Describe the amount of memory overhead that is going to per-page metadata on the system at any given time since this overhead is not currently observable. Debugging: Tracking the changes or absolute value in struct pages can help detect anomalies as they can be correlated with other metrics in the machine (e.g., memtotal, number of huge pages, etc). page_ext overheads: Some kernel features such as page_owner page_table_check that use page_ext can be optionally enabled via kernel parameters. Having the total per-page metadata information helps users precisely measure impact. Furthermore, page-metadata metrics will reflect the amount of struct pages reliquished (or overhead reduced) when hugetlbfs pages are reserved which will vary depending on whether hugetlb vmemmap optimization is enabled or not. For background and results see: lore.kernel.org/all/20240220214558.3377482-1-souravpanda@google.com Link: https://lkml.kernel.org/r/20240605222751.1406125-1-souravpanda@google.com Signed-off-by: Sourav Panda <souravpanda@google.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Chen Linxuan <chenlinxuan@uniontech.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ivan Babrou <ivan@cloudflare.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tomas Mudrunka <tomas.mudrunka@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Xu <weixugc@google.com> Cc: Yang Yang <yang.yang29@zte.com.cn> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Leesoo Ahn
|
afb90a36c6 |
mm/sparse: use MEMBLOCK_ALLOC_ACCESSIBLE enum instead of 0
Setting 'limit' variable to 0 might seem like it means "no limit". But in the memblock API, 0 actually means the 'MEMBLOCK_ALLOC_ACCESSIBLE' enum, which limits the physical address range end based on 'memblock.current_limit'. This could be confusing. Use the enum instead of 0 to make it clear. Link: https://lkml.kernel.org/r/20240610151528.943680-1-lsahn@wewakecorp.com Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Dev Jain
|
fe91eca680 |
mm: sparse: consistently use _nr
Consistently name the return variable with an _nr suffix, whenever calling pfn_to_section_nr(), to avoid confusion with a (struct mem_section *). Link: https://lkml.kernel.org/r/20240531124144.240399-1-dev.jain@arm.com Signed-off-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Wei Yang
|
122ff80e12 |
mm/sparse: guard the size of mem_section is power of 2
We usually have this check, while commit
|
||
Baoquan He
|
850ed20539 |
mm: move array mem_section init code out of memory_present()
Patch series "mm/init: minor clean up and improvement". These are all observed when going through code flow during mm init. This patch (of 7): When CONFIG_SPARSEMEM_EXTREME is enabled, mem_section need be initialized to point at a two-dimensional array, and its 1st dimension of length NR_SECTION_ROOTS will be dynamically allocated. Once the allocation is done, it's available for all nodes. So take the 1st dimension of mem_section initialization out of memory_present()(), and put it into memblocks_present() which is a more appripriate place. Link: https://lkml.kernel.org/r/20240326061134.1055295-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20240326061134.1055295-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Sumanth Korikkar
|
c5f1e2d189 |
mm/memory_hotplug: introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers
Patch series "implement "memmap on memory" feature on s390".
This series provides "memmap on memory" support on s390 platform. "memmap
on memory" allows struct pages array to be allocated from the hotplugged
memory range instead of allocating it from main system memory.
s390 currently preallocates struct pages array for all potentially
possible memory, which ensures memory onlining always succeeds, but with
the cost of significant memory consumption from the available system
memory during boottime. In certain extreme configuration, this could lead
to ipl failure.
"memmap on memory" ensures struct pages array are populated from self
contained hotplugged memory range instead of depleting the available
system memory and this could eliminate ipl failure on s390 platform.
On other platforms, system might go OOM when the physically hotplugged
memory depletes the available memory before it is onlined. Hence, "memmap
on memory" feature was introduced as described in commit
|
||
Charan Teja Kalla
|
5ec8e8ea8b |
mm/sparsemem: fix race in accessing memory_section->usage
The below race is observed on a PFN which falls into the device memory
region with the system memory configuration where PFN's are such that
[ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL]. Since normal zone start and end
pfn contains the device memory PFN's as well, the compaction triggered
will try on the device memory PFN's too though they end up in NOP(because
pfn_to_online_page() returns NULL for ZONE_DEVICE memory sections). When
from other core, the section mappings are being removed for the
ZONE_DEVICE region, that the PFN in question belongs to, on which
compaction is currently being operated is resulting into the kernel crash
with CONFIG_SPASEMEM_VMEMAP enabled. The crash logs can be seen at [1].
compact_zone() memunmap_pages
------------- ---------------
__pageblock_pfn_to_page
......
(a)pfn_valid():
valid_section()//return true
(b)__remove_pages()->
sparse_remove_section()->
section_deactivate():
[Free the array ms->usage and set
ms->usage = NULL]
pfn_section_valid()
[Access ms->usage which
is NULL]
NOTE: From the above it can be said that the race is reduced to between
the pfn_valid()/pfn_section_valid() and the section deactivate with
SPASEMEM_VMEMAP enabled.
The commit b943f045a9af("mm/sparse: fix kernel crash with
pfn_section_valid check") tried to address the same problem by clearing
the SECTION_HAS_MEM_MAP with the expectation of valid_section() returns
false thus ms->usage is not accessed.
Fix this issue by the below steps:
a) Clear SECTION_HAS_MEM_MAP before freeing the ->usage.
b) RCU protected read side critical section will either return NULL
when SECTION_HAS_MEM_MAP is cleared or can successfully access ->usage.
c) Free the ->usage with kfree_rcu() and set ms->usage = NULL. No
attempt will be made to access ->usage after this as the
SECTION_HAS_MEM_MAP is cleared thus valid_section() return false.
Thanks to David/Pavan for their inputs on this patch.
[1] https://lore.kernel.org/linux-mm/994410bb-89aa-d987-1f50-f514903c55aa@quicinc.com/
On Snapdragon SoC, with the mentioned memory configuration of PFN's as
[ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL], we are able to see bunch of
issues daily while testing on a device farm.
For this particular issue below is the log. Though the below log is
not directly pointing to the pfn_section_valid(){ ms->usage;}, when we
loaded this dump on T32 lauterbach tool, it is pointing.
[ 540.578056] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
[ 540.578068] Mem abort info:
[ 540.578070] ESR = 0x0000000096000005
[ 540.578073] EC = 0x25: DABT (current EL), IL = 32 bits
[ 540.578077] SET = 0, FnV = 0
[ 540.578080] EA = 0, S1PTW = 0
[ 540.578082] FSC = 0x05: level 1 translation fault
[ 540.578085] Data abort info:
[ 540.578086] ISV = 0, ISS = 0x00000005
[ 540.578088] CM = 0, WnR = 0
[ 540.579431] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBSBTYPE=--)
[ 540.579436] pc : __pageblock_pfn_to_page+0x6c/0x14c
[ 540.579454] lr : compact_zone+0x994/0x1058
[ 540.579460] sp : ffffffc03579b510
[ 540.579463] x29: ffffffc03579b510 x28: 0000000000235800 x27:000000000000000c
[ 540.579470] x26: 0000000000235c00 x25: 0000000000000068 x24:ffffffc03579b640
[ 540.579477] x23: 0000000000000001 x22: ffffffc03579b660 x21:0000000000000000
[ 540.579483] x20: 0000000000235bff x19: ffffffdebf7e3940 x18:ffffffdebf66d140
[ 540.579489] x17: 00000000739ba063 x16: 00000000739ba063 x15:00000000009f4bff
[ 540.579495] x14: 0000008000000000 x13: 0000000000000000 x12:0000000000000001
[ 540.579501] x11: 0000000000000000 x10: 0000000000000000 x9 :ffffff897d2cd440
[ 540.579507] x8 : 0000000000000000 x7 : 0000000000000000 x6 :ffffffc03579b5b4
[ 540.579512] x5 : 0000000000027f25 x4 : ffffffc03579b5b8 x3 :0000000000000001
[ 540.579518] x2 : ffffffdebf7e3940 x1 : 0000000000235c00 x0 :0000000000235800
[ 540.579524] Call trace:
[ 540.579527] __pageblock_pfn_to_page+0x6c/0x14c
[ 540.579533] compact_zone+0x994/0x1058
[ 540.579536] try_to_compact_pages+0x128/0x378
[ 540.579540] __alloc_pages_direct_compact+0x80/0x2b0
[ 540.579544] __alloc_pages_slowpath+0x5c0/0xe10
[ 540.579547] __alloc_pages+0x250/0x2d0
[ 540.579550] __iommu_dma_alloc_noncontiguous+0x13c/0x3fc
[ 540.579561] iommu_dma_alloc+0xa0/0x320
[ 540.579565] dma_alloc_attrs+0xd4/0x108
[quic_charante@quicinc.com: use kfree_rcu() in place of synchronize_rcu(), per David]
Link: https://lkml.kernel.org/r/1698403778-20938-1-git-send-email-quic_charante@quicinc.com
Link: https://lkml.kernel.org/r/1697202267-23600-1-git-send-email-quic_charante@quicinc.com
Fixes:
|
||
liuq
|
c200a7119b |
mm/sparse: remove redundant judgments from macro for_each_present_section_nr
next_present_section_nr() has already ensured that 'section_nr<=__highest_present_section_nr', so this check is removed. Link: https://lkml.kernel.org/r/20230707060501.29184-1-liuq131@chinatelecom.cn Signed-off-by: liuq <liuq131@chinatelecom.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Linus Torvalds
|
77b1a7f7a0 |
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in
top-level directories. - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs. - Zhen Lei has enhanced kexec's ability to support two crash regions. - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries. - And the usual bunch of singleton patches in various places. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa 2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU= =F293 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-mm updates from Andrew Morton: - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level directories - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs - Zhen Lei has enhanced kexec's ability to support two crash regions - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries - And the usual bunch of singleton patches in various places * tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) kernel/time/posix-stubs.c: remove duplicated include ocfs2: remove redundant assignment to variable bit_off watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h devres: show which resource was invalid in __devm_ioremap_resource() watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64 watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h watchdog/hardlockup: make the config checks more straightforward watchdog/hardlockup: sort hardlockup detector related config values a logical way watchdog/hardlockup: move SMP barriers from common code to buddy code watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY watchdog/buddy: don't copy the cpumask in watchdog_next_cpu() watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog() watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy() watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick() watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe() watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails ... |
||
Yajun Deng
|
bd5f79ab39 |
mm/sparse: remove unused parameters in sparse_remove_section()
These parameters ms and map_offset are not used in sparse_remove_section(), so remove them. The __remove_section() is only called by __remove_pages(), remove it. And put the WARN_ON_ONCE() in sparse_remove_section(). Link: https://lkml.kernel.org/r/20230607023952.2247489-1-yajun.deng@linux.dev Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Arnd Bergmann
|
52bb85d643 |
mm: sparse: mark populate_section_memmap() static
There are two definitions of this function, but the second one lacks the 'static' annotation: mm/sparse.c:704:25: error: no previous prototype for 'populate_section_memmap' [-Werror=missing-prototypes] Link: https://lkml.kernel.org/r/20230517131102.934196-4-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Paris <eparis@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Li zeming
|
f0ca8c2525 |
sparse: remove unnecessary 0 values from rc
rc is assigned first, so it does not need to initialize the assignment. Link: https://lkml.kernel.org/r/20230421214733.2909-1-zeming@nfschina.com Signed-off-by: Li zeming <zeming@nfschina.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Mike Rapoport
|
2e126aa290 |
mm/sparse: fix "unused function 'pgdat_to_phys'" warning
W=1 build with clangs complains: mm/sparse.c:347:27: warning: unused function 'pgdat_to_phys' [-Wunused-function] static inline phys_addr_t pgdat_to_phys(struct pglist_data *pgdat) ^ 1 warning generated. pgdat_to_phys() is only used by functions defined when CONFIG_MEMORY_HOTREMOVE=y. Move pgdat_to_phys() under #ifdef CONFIG_MEMORY_HOTREMOVE to make clang happy. Link: https://lkml.kernel.org/r/20230121101151.1703292-1-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202301210155.1E5zABb5-lkp@intel.com Cc: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Naoya Horiguchi
|
5033091de8 |
mm/hwpoison: introduce per-memory_block hwpoison counter
Currently PageHWPoison flag does not behave well when experiencing memory hotremove/hotplug. Any data field in struct page is unreliable when the associated memory is offlined, and the current mechanism can't tell whether a memory block is onlined because a new memory devices is installed or because previous failed offline operations are undone. Especially if there's a hwpoisoned memory, it's unclear what the best option is. So introduce a new mechanism to make struct memory_block remember that a memory block has hwpoisoned memory inside it. And make any online event fail if the onlining memory block contains hwpoison. struct memory_block is freed and reallocated over ACPI-based hotremove/hotplug, but not over sysfs-based hotremove/hotplug. So the new counter can distinguish these cases. Link: https://lkml.kernel.org/r/20221024062012.1520887-5-naoya.horiguchi@linux.dev Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Muchun Song
|
ed7802dd48 |
mm: memory_hotplug: enumerate all supported section flags
Patch series "make hugetlb_optimize_vmemmap compatible with memmap_on_memory", v3. This series makes hugetlb_optimize_vmemmap compatible with memmap_on_memory. This patch (of 2): We are almost running out of section flags, only one bit is available in the worst case (powerpc with 256k pages). However, there are still some free bits (in ->section_mem_map) on other architectures (e.g. x86_64 has 10 bits available, arm64 has 8 bits available with worst case of 64K pages). We have hard coded those numbers in code, it is inconvenient to use those bits on other architectures except powerpc. So transfer those section flags to enumeration to make it easy to add new section flags in the future. Also, move SECTION_TAINT_ZONE_DEVICE into the scope of CONFIG_ZONE_DEVICE to save a bit on non-zone-device case. [songmuchun@bytedance.com: replace enum with defines per David] Link: https://lkml.kernel.org/r/20220620110616.12056-2-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20220617135650.74901-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20220617135650.74901-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
zhenwei pi
|
60f272f6b0 |
mm/memory-failure.c: move clear_hwpoisoned_pages
Patch series "memory-failure: fix hwpoison_filter", v2. As well known, the memory failure mechanism handles memory corrupted event, and try to send SIGBUS to the user process which uses this corrupted page. For the virtualization case, QEMU catches SIGBUS and tries to inject MCE into the guest, and the guest handles memory failure again. Thus the guest gets the minimal effect from hardware memory corruption. The further step I'm working on: 1, try to modify code to decrease poisoned pages in a single place (mm/memofy-failure.c: simplify num_poisoned_pages_dec in this series). 2, try to use page_handle_poison() to handle SetPageHWPoison() and num_poisoned_pages_inc() together. It would be best to call num_poisoned_pages_inc() in a single place too. 3, introduce memory failure notifier list in memory-failure.c: notify the corrupted PFN to someone who registers this list. If I can complete [1] and [2] part, [3] will be quite easy(just call notifier list after increasing poisoned page). 4, introduce memory recover VQ for memory balloon device, and registers memory failure notifier list. During the guest kernel handles memory failure, balloon device gets notified by memory failure notifier list, and tells the host to recover the corrupted PFN(GPA) by the new VQ. 5, host side remaps the corrupted page(HVA), and tells the guest side to unpoison the PFN(GPA). Then the guest fixes the corrupted page(GPA) dynamically. This patch (of 5): clear_hwpoisoned_pages() clears HWPoison flag and decreases the number of poisoned pages, this actually works as part of memory failure. Move this function from sparse.c to memory-failure.c, finally there is no CONFIG_MEMORY_FAILURE in sparse.c. Link: https://lkml.kernel.org/r/20220509105641.491313-1-pizhenwei@bytedance.com Link: https://lkml.kernel.org/r/20220509105641.491313-2-pizhenwei@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Joao Martins
|
e3246d8f52 |
mm/sparse-vmemmap: add a pgmap argument to section activation
Patch series "sparse-vmemmap: memory savings for compound devmaps (device-dax)", v9. This series minimizes 'struct page' overhead by pursuing a similar approach as Muchun Song series "Free some vmemmap pages of hugetlb page" (now merged since v5.14), but applied to devmap with @vmemmap_shift (device-dax). The vmemmap dedpulication original idea (already used in HugeTLB) is to reuse/deduplicate tail page vmemmap areas, particular the area which only describes tail pages. So a vmemmap page describes 64 struct pages, and the first page for a given ZONE_DEVICE vmemmap would contain the head page and 63 tail pages. The second vmemmap page would contain only tail pages, and that's what gets reused across the rest of the subsection/section. The bigger the page size, the bigger the savings (2M hpage -> save 6 vmemmap pages; 1G hpage -> save 4094 vmemmap pages). This is done for PMEM /specifically only/ on device-dax configured namespaces, not fsdax. In other words, a devmap with a @vmemmap_shift. In terms of savings, per 1Tb of memory, the struct page cost would go down with compound devmap: * with 2M pages we lose 4G instead of 16G (0.39% instead of 1.5% of total memory) * with 1G pages we lose 40MB instead of 16G (0.0014% instead of 1.5% of total memory) The series is mostly summed up by patch 4, and to summarize what the series does: Patches 1 - 3: Minor cleanups in preparation for patch 4. Move the very nice docs of hugetlb_vmemmap.c into a Documentation/vm/ entry. Patch 4: Patch 4 is the one that takes care of the struct page savings (also referred to here as tail-page/vmemmap deduplication). Much like Muchun series, we reuse the second PTE tail page vmemmap areas across a given @vmemmap_shift On important difference though, is that contrary to the hugetlbfs series, there's no vmemmap for the area because we are late-populating it as opposed to remapping a system-ram range. IOW no freeing of pages of already initialized vmemmap like the case for hugetlbfs, which greatly simplifies the logic (besides not being arch-specific). altmap case unchanged and still goes via the vmemmap_populate(). Also adjust the newly added docs to the device-dax case. [Note that device-dax is still a little behind HugeTLB in terms of savings. I have an additional simple patch that reuses the head vmemmap page too, as a follow-up. That will double the savings and namespaces initialization.] Patch 5: Initialize fewer struct pages depending on the page size with DRAM backed struct pages -- because fewer pages are unique and most tail pages (with bigger vmemmap_shift). NVDIMM namespace bootstrap improves from ~268-358 ms to ~80-110/<1ms on 128G NVDIMMs with 2M and 1G respectivally. And struct page needed capacity will be 3.8x / 1071x smaller for 2M and 1G respectivelly. Tested on x86 with 1.5Tb of pmem (including pinning, and RDMA registration/deregistration scalability with 2M MRs) This patch (of 5): In support of using compound pages for devmap mappings, plumb the pgmap down to the vmemmap_populate implementation. Note that while altmap is retrievable from pgmap the memory hotplug code passes altmap without pgmap[*], so both need to be independently plumbed. So in addition to @altmap, pass @pgmap to sparse section populate functions namely: sparse_add_section section_activate populate_section_memmap __populate_section_memmap Passing @pgmap allows __populate_section_memmap() to both fetch the vmemmap_shift in which memmap metadata is created for and also to let sparse-vmemmap fetch pgmap ranges to co-relate to a given section and pick whether to just reuse tail pages from past onlined sections. While at it, fix the kdoc for @altmap for sparse_add_section(). [*] https://lore.kernel.org/linux-mm/20210319092635.6214-1-osalvador@suse.de/ Link: https://lkml.kernel.org/r/20220420155310.9712-1-joao.m.martins@oracle.com Link: https://lkml.kernel.org/r/20220420155310.9712-2-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jane Chu <jane.chu@oracle.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Miaohe Lin
|
c7878534a1 |
mm/sparse: make mminit_validate_memmodel_limits() static
It's only used in the sparse.c now. So we can make it static and further clean up the relevant code. Link: https://lkml.kernel.org/r/20220127093221.63524-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
c5e97ed154 |
bootmem: Use page->index instead of page->freelist
page->freelist is for the use of slab. Using page->index is the same set of bits as page->freelist, and by using an integer instead of a pointer, we can avoid casts. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: <x86@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> |
||
Mike Rapoport
|
4421cca0a3 |
memblock: use memblock_free for freeing virtual pointers
Rename memblock_free_ptr() to memblock_free() and use memblock_free() when freeing a virtual pointer so that memblock_free() will be a counterpart of memblock_alloc() The callers are updated with the below semantic patch and manual addition of (void *) casting to pointers that are represented by unsigned long variables. @@ identifier vaddr; expression size; @@ ( - memblock_phys_free(__pa(vaddr), size); + memblock_free(vaddr, size); | - memblock_free_ptr(vaddr, size); + memblock_free(vaddr, size); ) [sfr@canb.auug.org.au: fixup] Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
3ecc68349b |
memblock: rename memblock_free to memblock_phys_free
Since memblock_free() operates on a physical range, make its name reflect it and rename it to memblock_phys_free(), so it will be a logical counterpart to memblock_phys_alloc(). The callers are updated with the below semantic patch: @@ expression addr; expression size; @@ - memblock_free(addr, size); + memblock_phys_free(addr, size); Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
fa27717110 |
memblock: drop memblock_free_early_nid() and memblock_free_early()
memblock_free_early_nid() is unused and memblock_free_early() is an alias for memblock_free(). Replace calls to memblock_free_early() with calls to memblock_free() and remove memblock_free_early() and memblock_free_early_nid(). Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
c803b3c8b3 |
mm: introduce memmap_alloc() to unify memory map allocation
There are several places that allocate memory for the memory map: alloc_node_mem_map() for FLATMEM, sparse_buffer_init() and __populate_section_memmap() for SPARSEMEM. The memory allocated in the FLATMEM case is zeroed and it is never poisoned, regardless of CONFIG_PAGE_POISON setting. The memory allocated in the SPARSEMEM cases is not zeroed and it is implicitly poisoned inside memblock if CONFIG_PAGE_POISON is set. Introduce memmap_alloc() wrapper for memblock allocators that will be used for both FLATMEM and SPARSEMEM cases and will makei memory map zeroing and poisoning consistent for different memory models. Link: https://lkml.kernel.org/r/20210714123739.16493-4-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Miles Chen
|
bdbda73550 |
mm/sparse: clarify pgdat_to_phys
Clarify pgdat_to_phys() by testing if pgdat == &contig_page_data when CONFIG_NUMA=n. We only expect contig_page_data in such case, so we use &contig_page_data directly instead of pgdat. No functional change intended when CONFIG_BUG_VM=n. Comment from Mark [1]: " ... and I reckon it'd be clearer and more robust to define pgdat_to_phys() in the same ifdefs as contig_page_data so that these, stay in-sync. e.g. have: | #ifdef CONFIG_NUMA | #define pgdat_to_phys(x) virt_to_phys(x) | #else /* CONFIG_NUMA */ | | extern struct pglist_data contig_page_data; | ... | #define pgdat_to_phys(x) __pa_symbol(&contig_page_data) | | #endif /* CONIFIG_NUMA */ " [1] https://lore.kernel.org/linux-arm-kernel/20210615131902.GB47121@C02TD0UTHF1T.local/ Link: https://lkml.kernel.org/r/20210723123342.26406-1-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Matthew Wilcox
|
e0dbb2bccf |
include/linux/mmzone.h: avoid a warning in sparse memory support
cppcheck warns that we're possibly losing information by shifting an int. It's a false positive, because we don't allow for a NUMA node ID that large, but if we ever change SECTION_NID_SHIFT, it could become a problem, and in any case this is usually a legitimate warning. Fix it by adding the necessary cast, which makes the compiler generate the right code. Link: https://lkml.kernel.org/r/YOya+aBZFFmC476e@casper.infradead.org Link: https://lkml.kernel.org/r/202107130348.6LsVT9Nc-lkp@intel.com Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ohhoon Kwon
|
11e02d3729 |
mm: sparse: remove __section_nr() function
As the last users of __section_nr() are gone, let's remove unused function __section_nr(). Link: https://lkml.kernel.org/r/20210707150212.855-4-ohoono.kwon@samsung.com Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ohhoon Kwon
|
a1bc561bb2 |
mm: sparse: pass section_nr to section_mark_present
Patch series "mm: sparse: remove __section_nr() function", v4. This patch (of 3): With CONFIG_SPARSEMEM_EXTREME enabled, __section_nr() which converts mem_section to section_nr could be costly since it iterates all section roots to check if the given mem_section is in its range. Since both callers of section_mark_present already know section_nr, let's also pass section_nr as well as mem_section in order to reduce costly translation. Link: https://lkml.kernel.org/r/20210707150212.855-1-ohoono.kwon@samsung.com Link: https://lkml.kernel.org/r/20210707150212.855-2-ohoono.kwon@samsung.com Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Muchun Song
|
426e5c429d |
mm: memory_hotplug: factor out bootmem core functions to bootmem_info.c
Patch series "Free some vmemmap pages of HugeTLB page", v23. This patch series will free some vmemmap pages(struct page structures) associated with each HugeTLB page when preallocated to save memory. In order to reduce the difficulty of the first version of code review. In this version, we disable PMD/huge page mapping of vmemmap if this feature was enabled. This acutely eliminates a bunch of the complex code doing page table manipulation. When this patch series is solid, we cam add the code of vmemmap page table manipulation in the future. The struct page structures (page structs) are used to describe a physical page frame. By default, there is an one-to-one mapping from a page frame to it's corresponding page struct. The HugeTLB pages consist of multiple base page size pages and is supported by many architectures. See hugetlbpage.rst in the Documentation directory for more details. On the x86 architecture, HugeTLB pages of size 2MB and 1GB are currently supported. Since the base page size on x86 is 4KB, a 2MB HugeTLB page consists of 512 base pages and a 1GB HugeTLB page consists of 4096 base pages. For each base page, there is a corresponding page struct. Within the HugeTLB subsystem, only the first 4 page structs are used to contain unique information about a HugeTLB page. HUGETLB_CGROUP_MIN_ORDER provides this upper limit. The only 'useful' information in the remaining page structs is the compound_head field, and this field is the same for all tail pages. By removing redundant page structs for HugeTLB pages, memory can returned to the buddy allocator for other uses. When the system boot up, every 2M HugeTLB has 512 struct page structs which size is 8 pages(sizeof(struct page) * 512 / PAGE_SIZE). HugeTLB struct pages(8 pages) page frame(8 pages) +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ | | | 0 | -------------> | 0 | | | +-----------+ +-----------+ | | | 1 | -------------> | 1 | | | +-----------+ +-----------+ | | | 2 | -------------> | 2 | | | +-----------+ +-----------+ | | | 3 | -------------> | 3 | | | +-----------+ +-----------+ | | | 4 | -------------> | 4 | | 2MB | +-----------+ +-----------+ | | | 5 | -------------> | 5 | | | +-----------+ +-----------+ | | | 6 | -------------> | 6 | | | +-----------+ +-----------+ | | | 7 | -------------> | 7 | | | +-----------+ +-----------+ | | | | | | +-----------+ The value of page->compound_head is the same for all tail pages. The first page of page structs (page 0) associated with the HugeTLB page contains the 4 page structs necessary to describe the HugeTLB. The only use of the remaining pages of page structs (page 1 to page 7) is to point to page->compound_head. Therefore, we can remap pages 2 to 7 to page 1. Only 2 pages of page structs will be used for each HugeTLB page. This will allow us to free the remaining 6 pages to the buddy allocator. Here is how things look after remapping. HugeTLB struct pages(8 pages) page frame(8 pages) +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ | | | 0 | -------------> | 0 | | | +-----------+ +-----------+ | | | 1 | -------------> | 1 | | | +-----------+ +-----------+ | | | 2 | ----------------^ ^ ^ ^ ^ ^ | | +-----------+ | | | | | | | | 3 | ------------------+ | | | | | | +-----------+ | | | | | | | 4 | --------------------+ | | | | 2MB | +-----------+ | | | | | | 5 | ----------------------+ | | | | +-----------+ | | | | | 6 | ------------------------+ | | | +-----------+ | | | | 7 | --------------------------+ | | +-----------+ | | | | | | +-----------+ When a HugeTLB is freed to the buddy system, we should allocate 6 pages for vmemmap pages and restore the previous mapping relationship. Apart from 2MB HugeTLB page, we also have 1GB HugeTLB page. It is similar to the 2MB HugeTLB page. We also can use this approach to free the vmemmap pages. In this case, for the 1GB HugeTLB page, we can save 4094 pages. This is a very substantial gain. On our server, run some SPDK/QEMU applications which will use 1024GB HugeTLB page. With this feature enabled, we can save ~16GB (1G hugepage)/~12GB (2MB hugepage) memory. Because there are vmemmap page tables reconstruction on the freeing/allocating path, it increases some overhead. Here are some overhead analysis. 1) Allocating 10240 2MB HugeTLB pages. a) With this patch series applied: # time echo 10240 > /proc/sys/vm/nr_hugepages real 0m0.166s user 0m0.000s sys 0m0.166s # bpftrace -e 'kprobe:alloc_fresh_huge_page { @start[tid] = nsecs; } kretprobe:alloc_fresh_huge_page /@start[tid]/ { @latency = hist(nsecs - @start[tid]); delete(@start[tid]); }' Attaching 2 probes... @latency: [8K, 16K) 5476 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [16K, 32K) 4760 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ | [32K, 64K) 4 | | b) Without this patch series: # time echo 10240 > /proc/sys/vm/nr_hugepages real 0m0.067s user 0m0.000s sys 0m0.067s # bpftrace -e 'kprobe:alloc_fresh_huge_page { @start[tid] = nsecs; } kretprobe:alloc_fresh_huge_page /@start[tid]/ { @latency = hist(nsecs - @start[tid]); delete(@start[tid]); }' Attaching 2 probes... @latency: [4K, 8K) 10147 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [8K, 16K) 93 | | Summarize: this feature is about ~2x slower than before. 2) Freeing 10240 2MB HugeTLB pages. a) With this patch series applied: # time echo 0 > /proc/sys/vm/nr_hugepages real 0m0.213s user 0m0.000s sys 0m0.213s # bpftrace -e 'kprobe:free_pool_huge_page { @start[tid] = nsecs; } kretprobe:free_pool_huge_page /@start[tid]/ { @latency = hist(nsecs - @start[tid]); delete(@start[tid]); }' Attaching 2 probes... @latency: [8K, 16K) 6 | | [16K, 32K) 10227 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [32K, 64K) 7 | | b) Without this patch series: # time echo 0 > /proc/sys/vm/nr_hugepages real 0m0.081s user 0m0.000s sys 0m0.081s # bpftrace -e 'kprobe:free_pool_huge_page { @start[tid] = nsecs; } kretprobe:free_pool_huge_page /@start[tid]/ { @latency = hist(nsecs - @start[tid]); delete(@start[tid]); }' Attaching 2 probes... @latency: [4K, 8K) 6805 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [8K, 16K) 3427 |@@@@@@@@@@@@@@@@@@@@@@@@@@ | [16K, 32K) 8 | | Summary: The overhead of __free_hugepage is about ~2-3x slower than before. Although the overhead has increased, the overhead is not significant. Like Mike said, "However, remember that the majority of use cases create HugeTLB pages at or shortly after boot time and add them to the pool. So, additional overhead is at pool creation time. There is no change to 'normal run time' operations of getting a page from or returning a page to the pool (think page fault/unmap)". Despite the overhead and in addition to the memory gains from this series. The following data is obtained by Joao Martins. Very thanks to his effort. There's an additional benefit which is page (un)pinners will see an improvement and Joao presumes because there are fewer memmap pages and thus the tail/head pages are staying in cache more often. Out of the box Joao saw (when comparing linux-next against linux-next + this series) with gup_test and pinning a 16G HugeTLB file (with 1G pages): get_user_pages(): ~32k -> ~9k unpin_user_pages(): ~75k -> ~70k Usually any tight loop fetching compound_head(), or reading tail pages data (e.g. compound_head) benefit a lot. There's some unpinning inefficiencies Joao was fixing[2], but with that in added it shows even more: unpin_user_pages(): ~27k -> ~3.8k [1] https://lore.kernel.org/linux-mm/20210409205254.242291-1-mike.kravetz@oracle.com/ [2] https://lore.kernel.org/linux-mm/20210204202500.26474-1-joao.m.martins@oracle.com/ This patch (of 9): Move bootmem info registration common API to individual bootmem_info.c. And we will use {get,put}_page_bootmem() to initialize the page for the vmemmap pages or free the vmemmap pages to buddy in the later patch. So move them out of CONFIG_MEMORY_HOTPLUG_SPARSE. This is just code movement without any functional change. Link: https://lkml.kernel.org/r/20210510030027.56044-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20210510030027.56044-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Chen Huang <chenhuang5@huawei.com> Tested-by: Bodeddula Balasubramaniam <bodeddub@amazon.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Oliver Neukum <oneukum@suse.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Mina Almasry <almasrymina@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Barry Song <song.bao.hua@hisilicon.com> Cc: HORIGUCHI NAOYA <naoya.horiguchi@nec.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
a9ee6cf5c6 |
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA configuration options are equivalent. Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead. Done with $ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \ $(git grep -wl CONFIG_NEED_MULTIPLE_NODES) $ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \ $(git grep -wl NEED_MULTIPLE_NODES) with manual tweaks afterwards. [rppt@linux.ibm.com: fix arm boot crash] Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Miles Chen
|
ccbd6283a9 |
mm/sparse: fix check_usemap_section_nr warnings
I see a "virt_to_phys used for non-linear address" warning from check_usemap_section_nr() on arm64 platforms. In current implementation of NODE_DATA, if CONFIG_NEED_MULTIPLE_NODES=y, pglist_data is dynamically allocated and assigned to node_data[]. For example, in arch/arm64/include/asm/mmzone.h: extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[(nid)]) If CONFIG_NEED_MULTIPLE_NODES=n, pglist_data is defined as a global variable named "contig_page_data". For example, in include/linux/mmzone.h: extern struct pglist_data contig_page_data; #define NODE_DATA(nid) (&contig_page_data) If CONFIG_DEBUG_VIRTUAL is not enabled, __pa() can handle both dynamically allocated linear addresses and symbol addresses. However, if (CONFIG_DEBUG_VIRTUAL=y && CONFIG_NEED_MULTIPLE_NODES=n) we can see the "virt_to_phys used for non-linear address" warning because that &contig_page_data is not a linear address on arm64. Warning message: virt_to_phys used for non-linear address: (contig_page_data+0x0/0x1c00) WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x58/0x68 Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.13.0-rc1-00074-g1140ab592e2e #3 Hardware name: linux,dummy-virt (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO BTYPE=--) Call trace: __virt_to_phys+0x58/0x68 check_usemap_section_nr+0x50/0xfc sparse_init_nid+0x1ac/0x28c sparse_init+0x1c4/0x1e0 bootmem_init+0x60/0x90 setup_arch+0x184/0x1f0 start_kernel+0x78/0x488 To fix it, create a small function to handle both translation. Link: https://lkml.kernel.org/r/1623058729-27264-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Kazu <k-hagio-ab@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Zhiyuan Dai
|
68d68ff6eb |
mm/mempool: minor coding style tweaks
Various coding style tweaks to various files under mm/ [daizhiyuan@phytium.com.cn: mm/swapfile: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614223624-16055-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/sparse: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227288-19363-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmscan: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614227649-19853-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/compaction: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228218-20770-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/oom_kill: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228360-21168-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/shmem: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228504-21491-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/page_alloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228613-21754-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/filemap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1614228936-22337-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mlock: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613956588-2453-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/frontswap: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613962668-15045-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/vmalloc: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613963379-15988-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/memory_hotplug: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613971784-24878-1-git-send-email-daizhiyuan@phytium.com.cn [daizhiyuan@phytium.com.cn: mm/mempolicy: minor coding style tweaks] Link: https://lkml.kernel.org/r/1613972228-25501-1-git-send-email-daizhiyuan@phytium.com.cn Link: https://lkml.kernel.org/r/1614222374-13805-1-git-send-email-daizhiyuan@phytium.com.cn Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Oscar Salvador
|
a08a2ae346 |
mm,memory_hotplug: allocate memmap from the added memory range
Physical memory hotadd has to allocate a memmap (struct page array) for the newly added memory section. Currently, alloc_pages_node() is used for those allocations. This has some disadvantages: a) an existing memory is consumed for that purpose (eg: ~2MB per 128MB memory section on x86_64) This can even lead to extreme cases where system goes OOM because the physically hotplugged memory depletes the available memory before it is onlined. b) if the whole node is movable then we have off-node struct pages which has performance drawbacks. c) It might be there are no PMD_ALIGNED chunks so memmap array gets populated with base pages. This can be improved when CONFIG_SPARSEMEM_VMEMMAP is enabled. Vmemap page tables can map arbitrary memory. That means that we can reserve a part of the physically hotadded memory to back vmemmap page tables. This implementation uses the beginning of the hotplugged memory for that purpose. There are some non-obviously things to consider though. Vmemmap pages are allocated/freed during the memory hotplug events (add_memory_resource(), try_remove_memory()) when the memory is added/removed. This means that the reserved physical range is not online although it is used. The most obvious side effect is that pfn_to_online_page() returns NULL for those pfns. The current design expects that this should be OK as the hotplugged memory is considered a garbage until it is onlined. For example hibernation wouldn't save the content of those vmmemmaps into the image so it wouldn't be restored on resume but this should be OK as there no real content to recover anyway while metadata is reachable from other data structures (e.g. vmemmap page tables). The reserved space is therefore (de)initialized during the {on,off}line events (mhp_{de}init_memmap_on_memory). That is done by extracting page allocator independent initialization from the regular onlining path. The primary reason to handle the reserved space outside of {on,off}line_pages is to make each initialization specific to the purpose rather than special case them in a single function. As per above, the functions that are introduced are: - mhp_init_memmap_on_memory: Initializes vmemmap pages by calling move_pfn_range_to_zone(), calls kasan_add_zero_shadow(), and onlines as many sections as vmemmap pages fully span. - mhp_deinit_memmap_on_memory: Offlines as many sections as vmemmap pages fully span, removes the range from zhe zone by remove_pfn_range_from_zone(), and calls kasan_remove_zero_shadow() for the range. The new function memory_block_online() calls mhp_init_memmap_on_memory() before doing the actual online_pages(). Should online_pages() fail, we clean up by calling mhp_deinit_memmap_on_memory(). Adjusting of present_pages is done at the end once we know that online_pages() succedeed. On offline, memory_block_offline() needs to unaccount vmemmap pages from present_pages() before calling offline_pages(). This is necessary because offline_pages() tears down some structures based on the fact whether the node or the zone become empty. If offline_pages() fails, we account back vmemmap pages. If it succeeds, we call mhp_deinit_memmap_on_memory(). Hot-remove: We need to be careful when removing memory, as adding and removing memory needs to be done with the same granularity. To check that this assumption is not violated, we check the memory range we want to remove and if a) any memory block has vmemmap pages and b) the range spans more than a single memory block, we scream out loud and refuse to proceed. If all is good and the range was using memmap on memory (aka vmemmap pages), we construct an altmap structure so free_hugepage_table does the right thing and calls vmem_altmap_free instead of free_pagetable. Link: https://lkml.kernel.org/r/20210421102701.25051-5-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Wang Wensheng
|
2284f47fe9 |
mm/sparse: add the missing sparse_buffer_fini() in error branch
sparse_buffer_init() and sparse_buffer_fini() should appear in pair, or a
WARN issue would be through the next time sparse_buffer_init() runs.
Add the missing sparse_buffer_fini() in error branch.
Link: https://lkml.kernel.org/r/20210325113155.118574-1-wangwensheng4@huawei.com
Fixes:
|
||
David Hildenbrand
|
3a0aaefe41 |
mm/memory_hotplug: guard more declarations by CONFIG_MEMORY_HOTPLUG
We soon want to pass flags via a new type to add_memory() and friends. That revealed that we currently don't guard some declarations by CONFIG_MEMORY_HOTPLUG. While some definitions could be moved to different places, let's keep it minimal for now and use CONFIG_MEMORY_HOTPLUG for all functions only compiled with CONFIG_MEMORY_HOTPLUG. Wrap sparse_decode_mem_map() into CONFIG_MEMORY_HOTPLUG, it's only called from CONFIG_MEMORY_HOTPLUG code. While at it, remove allow_online_pfn_range(), which is no longer around, and mhp_notimplemented(), which is unused. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jason Wang <jasowang@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Julien Grall <julien@xen.org> Cc: Kees Cook <keescook@chromium.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Len Brown <lenb@kernel.org> Cc: Leonardo Bras <leobras.c@gmail.com> Cc: Libor Pechacek <lpechacek@suse.cz> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Wei Liu <wei.liu@kernel.org> Link: https://lkml.kernel.org/r/20200911103459.10306-4-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
c9118e6c37 |
arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start_pfn = memblock_region_memory_base_pfn(reg); end_pfn = memblock_region_memory_end_pfn(reg); /* do something with start_pfn and end_pfn */ } Rather than iterate over all memblock.memory regions and each time query for their start and end PFNs, use for_each_mem_pfn_range() iterator to get simpler and clearer code. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
c89ab04feb |
mm/sparse: cleanup the code surrounding memory_present()
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent functions that call memory_present() for each region in memblock.memory: sparse_memory_present_with_active_regions() and membocks_present(). Moreover, all architectures have a call to either of these functions preceding the call to sparse_init() and in the most cases they are called one after the other. Mark the regions from memblock.memory as present during sparce_init() by making sparse_init() call memblocks_present(), make memblocks_present() and memory_present() functions static and remove redundant sparse_memory_present_with_active_regions() function. Also remove no longer required HAVE_MEMORY_PRESENT configuration option. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Wei Yang
|
ef69bc9f68 |
mm/sparse: never partially remove memmap for early section
For early sections, its memmap is handled specially even sub-section is
enabled. The memmap could only be populated as a whole.
Quoted from the comment of section_activate():
* The early init code does not consider partially populated
* initial sections, it simply assumes that memory will never be
* referenced. If we hot-add memory into such a section then we
* do not need to populate the memmap and can simply reuse what
* is already there.
While current section_deactivate() breaks this rule. When hot-remove a
sub-section, section_deactivate() would depopulate its memmap. The
consequence is if we hot-add this subsection again, its memmap never get
proper populated.
We can reproduce the case by following steps:
1. Hacking qemu to allow sub-section early section
: diff --git a/hw/i386/pc.c b/hw/i386/pc.c
: index 51b3050d01..c6a78d83c0 100644
: --- a/hw/i386/pc.c
: +++ b/hw/i386/pc.c
: @@ -1010,7 +1010,7 @@ void pc_memory_init(PCMachineState *pcms,
: }
:
: machine->device_memory->base =
: - ROUND_UP(0x100000000ULL + x86ms->above_4g_mem_size, 1 * GiB);
: + 0x100000000ULL + x86ms->above_4g_mem_size;
:
: if (pcmc->enforce_aligned_dimm) {
: /* size device region assuming 1G page max alignment per slot */
2. Bootup qemu with PSE disabled and a sub-section aligned memory size
Part of the qemu command would look like this:
sudo x86_64-softmmu/qemu-system-x86_64 \
--enable-kvm -cpu host,pse=off \
-m 4160M,maxmem=20G,slots=1 \
-smp sockets=2,cores=16 \
-numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \
-machine pc,nvdimm \
-nographic \
-object memory-backend-ram,id=mem0,size=8G \
-device nvdimm,id=vm0,memdev=mem0,node=0,addr=0x144000000,label-size=128k
3. Re-config a pmem device with sub-section size in guest
ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax --size=16M
Then you would see the following call trace:
pmem0: detected capacity change from 0 to 16777216
BUG: unable to handle page fault for address: ffffec73c51000b4
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 81ff8067 P4D 81ff8067 PUD 81ff7067 PMD 1437cb067 PTE 0
Oops: 0002 [#1] SMP NOPTI
CPU: 16 PID: 1348 Comm: ndctl Kdump: loaded Tainted: G W 5.8.0-rc2+ #24
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.4
RIP: 0010:memmap_init_zone+0x154/0x1c2
Code: 77 16 f6 40 10 02 74 10 48 03 48 08 48 89 cb 48 c1 eb 0c e9 3a ff ff ff 48 89 df 48 c1 e7 06 48f
RSP: 0018:ffffbdc7011a39b0 EFLAGS: 00010282
RAX: ffffec73c5100088 RBX: 0000000000144002 RCX: 0000000000144000
RDX: 0000000000000004 RSI: 007ffe0000000000 RDI: ffffec73c5100080
RBP: 027ffe0000000000 R08: 0000000000000001 R09: ffff9f8d38f6d708
R10: ffffec73c0000000 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: 0000000000144200 R15: 0000000000000000
FS: 00007efe6b65d780(0000) GS:ffff9f8d3f780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffec73c51000b4 CR3: 000000007d718000 CR4: 0000000000340ee0
Call Trace:
move_pfn_range_to_zone+0x128/0x150
memremap_pages+0x4e4/0x5a0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0x69/0x160 [device_dax]
really_probe+0x298/0x3c0
driver_probe_device+0xe1/0x150
? driver_allows_async_probing+0x50/0x50
bus_for_each_drv+0x7e/0xc0
__device_attach+0xdf/0x160
bus_probe_device+0x8e/0xa0
device_add+0x3b9/0x740
__devm_create_dev_dax+0x127/0x1c0
__dax_pmem_probe+0x1f2/0x219 [dax_pmem_core]
dax_pmem_probe+0xc/0x1b [dax_pmem]
nvdimm_bus_probe+0x69/0x1c0 [libnvdimm]
really_probe+0x147/0x3c0
driver_probe_device+0xe1/0x150
device_driver_attach+0x53/0x60
bind_store+0xd1/0x110
kernfs_fop_write+0xce/0x1b0
vfs_write+0xb6/0x1a0
ksys_write+0x5f/0xe0
do_syscall_64+0x4d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
|
||
Mike Rapoport
|
ca15ca406f |
mm: remove unneeded includes of <asm/pgalloc.h>
Patch series "mm: cleanup usage of <asm/pgalloc.h>" Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in <asm-generic/pgalloc.h> and enable use of the generic functions where appropriate. In addition, functions declared and defined in <asm/pgalloc.h> headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the <asm/pgalloc.h> included all over the place. The first patch in this series removes unneeded includes of <asm/pgalloc.h> In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases <asm/pgalloc.h> header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in <asm/pgalloc.h> and do not require that header. As for the other header files that used to include <asm/pgalloc.h>, it is possible to move that include into the .c file that actually uses symbols from <asm/pgalloc.h> and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [rppt@linux.ibm.com: fix powerpc warning] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
e31cf2f4ca |
mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ethon Paul
|
2e6787d380 |
mm/sparse: fix a typo in comment "convienence"->"convenience"
There is a typo in comment, fix it. Signed-off-by: Ethon Paul <ethp@qq.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200411002955.14545-1-ethp@qq.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
6ecb0fc612 |
mm/sparse.c: move subsection_map related functions together
No functional change. [bhe@redhat.com: move functions into CONFIG_MEMORY_HOTPLUG ifdeffery scope] Link: http://lkml.kernel.org/r/20200316045804.GC3486@MiWiFi-R3L-srv Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20200312124414.439-6-bhe@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
95a5a34dfe |
mm/sparse.c: add note about only VMEMMAP supporting sub-section hotplug
And tell check_pfn_span() gating the porper alignment and size of hot added memory region. And also move the code comments from inside section_deactivate() to being above it. The code comments are reasonable for the whole function, and the moving makes code cleaner. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Link: http://lkml.kernel.org/r/20200312124414.439-5-bhe@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
0a9f9f6231 |
mm/sparse.c: only use subsection map in VMEMMAP case
Currently, to support subsection aligned memory region adding for pmem, subsection map is added to track which subsection is present. However, config ZONE_DEVICE depends on SPARSEMEM_VMEMMAP. It means subsection map only makes sense when SPARSEMEM_VMEMMAP enabled. For the classic sparse, it's meaningless. Even worse, it may confuse people when checking code related to the classic sparse. About the classic sparse which doesn't support subsection hotplug, Dan said it's more because the effort and maintenance burden outweighs the benefit. Besides, the current 64 bit ARCHes all enable SPARSEMEM_VMEMMAP_ENABLE by default. Combining the above reasons, no need to provide subsection map and the relevant handling for the classic sparse. Let's remove them. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Link: http://lkml.kernel.org/r/20200312124414.439-4-bhe@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
37bc15020a |
mm/sparse.c: introduce a new function clear_subsection_map()
Factor out the code which clear subsection map of one memory region from section_deactivate() into clear_subsection_map(). And also add helper function is_subsection_map_empty() to check if the current subsection map is empty or not. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richard.weiyang@gmail.com> Link: http://lkml.kernel.org/r/20200312124414.439-3-bhe@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
5d87255cad |
mm/sparse.c: introduce new function fill_subsection_map()
Patch series "mm/hotplug: Only use subsection map for VMEMMAP", v4. Memory sub-section hotplug was added to fix the issue that nvdimm could be mapped at non-section aligned starting address. A subsection map is added into struct mem_section_usage to implement it. However, config ZONE_DEVICE depends on SPARSEMEM_VMEMMAP. It means subsection map only makes sense when SPARSEMEM_VMEMMAP enabled. For the classic sparse, subsection map is meaningless and confusing. About the classic sparse which doesn't support subsection hotplug, Dan said it's more because the effort and maintenance burden outweighs the benefit. Besides, the current 64 bit ARCHes all enable SPARSEMEM_VMEMMAP_ENABLE by default. This patch (of 5): Factor out the code that fills the subsection map from section_activate() into fill_subsection_map(), this makes section_activate() cleaner and easier to follow. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@suse.com> Link: http://lkml.kernel.org/r/20200312124414.439-2-bhe@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
4027149abd |
mm/sparse.c: allocate memmap preferring the given node
When allocating memmap for hot added memory with the classic sparse, the specified 'nid' is ignored in populate_section_memmap(). While in allocating memmap for the classic sparse during boot, the node given by 'nid' is preferred. And VMEMMAP prefers the node of 'nid' in both boot stage and memory hot adding. So seems no reason to not respect the node of 'nid' for the classic sparse when hot adding memory. Use kvmalloc_node instead to use the passed in 'nid'. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Link: http://lkml.kernel.org/r/20200316125625.GH3486@MiWiFi-R3L-srv Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Baoquan He
|
3af776f601 |
mm/sparse.c: use kvmalloc/kvfree to alloc/free memmap for the classic sparse
This change makes populate_section_memmap()/depopulate_section_memmap much simpler. Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Link: http://lkml.kernel.org/r/20200316125450.GG3486@MiWiFi-R3L-srv Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Wei Yang
|
4627d76dcf |
mm/sparsemem: get address to page struct instead of address to pfn
memmap should be the address to page struct instead of address to pfn.
As mentioned by David, if system memory and devmem sit within a section,
the mismatch address would lead kdump to dump unexpected memory.
Since sub-section only works for SPARSEMEM_VMEMMAP, pfn_to_page() is valid
to get the page struct address at this point.
Fixes:
|