The Operating Performance Point (OPP) Layer library is a generic
library used by CPUFREQ and DEVFREQ. It can be enabled only on the
platforms that specify ARCH_HAS_OPP option.
This patch selects that option in order to allow ARM64 based platforms
to use OPP library.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The value of ESR has been stored into x1, and should be directly pass to
do_sp_pc_abort function, "MOV x1, x25" is an extra operation and do_sp_pc_abort
will get the wrong value of ESR.
Signed-off-by: ChiaHao <andy.jhshiu@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Commit aa8532c322 (xen: refactor suspend
pre/post hooks) broke resuming PVHVM (auto-translated physmap) guests.
The gnttab_suspend() would clear the mapping for the grant table
frames, but the ->unmap_frames() call is only applicable to PV guests.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Remove xen_enable_nmi() to fix a 64-bit guest crash when registering
the NMI callback on Xen 3.1 and earlier.
It's not needed since the NMI callback is set by a set_trap_table
hypercall (in xen_load_idt() or xen_write_idt_entry()).
It's also broken since it only set the current VCPU's callback.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Add Serge E. Hallyn <serge@hallyn.com> as a co-maintainer of the
security subsystem, to avoid having a single point of failure
in the development process.
Signed-off-by: James Morris <james.l.morris@oracle.com>
couple more DP regression fixes.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/disp: fix oops in destructor with headless cards
drm/gf117/i2c: no aux channels on this chipset
If init doesn't run then disp->outp might not be initialized, resulting
in an oops.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This update fixes few issues in bt_get() function:
- list_empty(&wait.task_list) check is not protected;
- was_empty check is always true which results in *every* thread
entering the loop resets bt_wait_state::wait_cnt counter rather
than every bt->wake_cnt'th thread;
- 'bt_wait_state::wait_cnt' counter update is redundant, since
it also gets reset in bt_clear_tag() function;
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This piece of code in bt_clear_tag() function is racy:
bs = bt_wake_ptr(bt);
if (bs && atomic_dec_and_test(&bs->wait_cnt)) {
atomic_set(&bs->wait_cnt, bt->wake_cnt);
wake_up(&bs->wait);
}
Since nothing prevents bt_wake_ptr() from returning the very
same 'bs' address on multiple CPUs, the following scenario is
possible:
CPU1 CPU2
---- ----
0. bs = bt_wake_ptr(bt); bs = bt_wake_ptr(bt);
1. atomic_dec_and_test(&bs->wait_cnt)
2. atomic_dec_and_test(&bs->wait_cnt)
3. atomic_set(&bs->wait_cnt, bt->wake_cnt);
If the decrement in [1] yields zero then for some amount of time
the decrement in [2] results in a negative/overflow value, which
is not expected. The follow-up assignment in [3] overwrites the
invalid value with the batch value (and likely prevents the issue
from being severe) which is still incorrect and should be a lesser.
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix racy updates of shared blk_mq_bitmap_tags::wake_index
and blk_mq_hw_ctx::wake_index fields.
Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 762380ad93 inadvertently changed a check for max_sectors
to max_hw_sectors. Revert that part, so we still compare against
max_sectors.
Signed-off-by: Jens Axboe <axboe@fb.com>
- A fix in of_attach_node due to of_find_node_by_path changes
- Prevent format strings in DT kobject names
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJToLl9AAoJEMhvYp4jgsXiD2AH/1CEzQ0i7SKZsQOYKXpVwgDC
dsOfJo6C7vk3QIi8VvX0i7e97LxcrrQaozQKdO+topS+0yB9wxbW/3BB2r8dkuBX
EED64hAZ3qIMH6Iz3H9UbTQ7v7zW3dGyygayMgBlZH+pKC4mMrJKcrQxxdGacKXS
a2vaGPnmLuECPxVWMjRCLM3f08rqBUmmW+Ci0QMNl7j3LLfbbL/oX70u0BDaAAWe
DkixrPxpDxR6uuDt9dpVDRC5R7SyNJiUYEIFtOiaKmLWqJpvqviSxBk2F4ZIE4sQ
yvUfceGjD7CpHdiDFSruCmwQsZgCepZTF2D/LeYZhW0IWCKBW6AXZNlS/YdGXqo=
=PuNT
-----END PGP SIGNATURE-----
Merge tag 'dt-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull device tree fixes from Rob Herring:
- fix microblaze compiling due to conflicting merge window changes
- a fix in of_attach_node due to of_find_node_by_path changes
- prevent format strings in DT kobject names
* tag 'dt-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
OF: fix of_find_node_by_path() assumption that of_allnodes is root
of: avoid format string parsing in kobject names
of/platform: Fix microblaze build failure
A few small fixes:
- Fixes for bugs in Palmas and as3722 exposed by recent changes in the
core - the drivers weren't allowing the current configuration to be
read sometimes.
- Provide a stub for regulator_can_change_voltage() for !REGULATOR.
- Make sure ltc3589 only looks at its child nodes in the device tree
rather than searching the whole tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ntCQ
-----END PGP SIGNATURE-----
Merge tag 'regulator-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few small fixes:
- Fixes for bugs in Palmas and as3722 exposed by recent changes in
the core - the drivers weren't allowing the current configuration
to be read sometimes.
- Provide a stub for regulator_can_change_voltage() for !REGULATOR.
- Make sure ltc3589 only looks at its child nodes in the device tree
rather than searching the whole tree"
* tag 'regulator-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: ltc3589: Use of_get_child_by_name
regulator: palmas: Fix SMPS list for 0V
regulator: add regulator_can_change_voltage stub
regulator: as3722: Make 0 a valid selector
A single bugfix from the merge window, fixing an issue with DMA at slow
speeds on Intel hardware.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bZNJ
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A single bugfix from the merge window, fixing an issue with DMA at
slow speeds on Intel hardware"
* tag 'spi-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi/pxa2xx: change default supported DMA burst size to 1
Fixes the following build error due to a typo introduced
by commit e4ac92df27 ("serial: samsung: Neaten dbg uses"):
drivers/tty/serial/samsung.c:69:26: error: ‘buf’ undeclared (first use in this function)
Reported-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In usbtest, tests 5 - 8 use the scatter-gather library in usbcore
without any sort of timeout. If there's a problem in the gadget or
host controller being tested, the test can hang.
This patch adds a 10-second timeout to the tests, so that they will
fail gracefully with an ETIMEDOUT error instead of hanging.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Huang Rui <ray.huang@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leandro Liptak reports that his HASEE E200 computer hangs when we ask
the BIOS to hand over control of the EHCI host controller. This
definitely sounds like a bug in the BIOS, but at the moment there is
no way to fix it.
This patch works around the problem by avoiding the handoff whenever
the motherboard and BIOS version match those of Leandro's computer.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Leandro Liptak <leandroliptak@gmail.com>
Tested-by: Leandro Liptak <leandroliptak@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9262c19d14 "usb: disable port power control if not supported in
wHubCharacteristics" gated enabling runtime pm for usb_port devices on
whether the parent hub supports power control, which causes a
regression. The port must still be allowed to carry out runtime pm
callbacks and receive a -EAGAIN or -EBUSY result. Otherwise the
usb_port device will transition to the pm error state and trigger the
same for the child usb_device.
Prior to the offending commit usb_hub_create_port_device() arranged for
runtime pm to be disabled is dev_pm_qos_expose_flags() failed. Instead,
force the default state of PM_QOS_FLAG_NO_POWER_OFF flag to be set prior
to enabling runtime pm. If that policy can not be set then fail
registration.
Report: http://marc.info/?l=linux-usb&m=140290586301336&w=2
Fixes: 9262c19d14 ("usb: disable port power control if not supported in wHubCharacteristics")
Reported-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case where platform firmware has specified conflicting values for
port locations it is confusing and otherwise not helpful to throw a
backtrace. Instead, include enough information to determine that
firmware has done something wrong and globally disable port poweroff.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reading through a recent bug report [1], Alan notes:
"Dan, the warning message in hub_suspend() should mention that the
child device isn't suspended yet."
...update the warning from:
"usb usb3-port4: not suspended yet"
...to:
"usb usb3-port4: device 3-4: not suspended yet"
[1]: http://marc.info/?l=linux-usb&m=140290586301336&w=2
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_stop_device() allocates and issues stop commands for each active endpoint.
This is done with spinlock held and interrupt disabled so we can't sleep during
memory allocation. Use GFP_NOWAIT instead
Regression from commit ddba5cd0ae
"xhci: Use command structures when queuing commands on the command ring"
for 3.16-rc1
Fixes: ddba5cd0ae ("xhci: Use command structures when queuing commands")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d8521afe35 "usb: assign default peer ports for root hubs"
delayed marking a hub valid (set hdev->maxchild) until it had been fully
configured and to enable the publishing of valid hubs to be serialized
by usb_port_peer_mutex.
However, xhci_update_hub_device() in some cases depends on
hdev->maxchild already being set. Do the minimal fix and move it after
the setting of hdev->maxchild.
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ddb09754e6.
Linus objected to this originally, I can see why it might be needed, but
given that no one spoke up defending this patch, I'm going to revert it.
If you have hardware that requires this change, please speak up in the
future and defend the patch.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Bin Wang <binw@marvell.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Norbert Ciosek <norbertciosek@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The filename requested by the driver didn't match what we had sitting
in /lib/firmware/
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a mistake in the actual rounding portion this previous patch:
f0fe3cd7e1 (intel_pstate: Correct rounding in busy calculation) such that
the rounding was asymetric and incorrect.
Severity: Not very serious, but can increase target pstate by one extra value.
For real world work flows the issue should self correct (but I have no proof).
It is the equivalent of different PID gains for positive and negative numbers.
Examples:
-3.000000 used to round to -4, rounds to -3 with this patch.
-3.503906 used to round to -5, rounds to -4 with this patch.
Fixes: f0fe3cd7e1 (intel_pstate: Correct rounding in busy calculation)
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 561f0ed498 (nfsd4: allow large readdirs) introduces a bug
about readdir the root of pseudofs.
Call xdr_truncate_encode() revert encoded name when skipping.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd needs to recall a delegation for some reason it implies that there is
contention on the file, so further delegations should not be handed out.
The current code fails to do so, and the result is effectively a
live-lock under some workloads: a client attempting a conflicting
operation on a read-delegated file receives NFS4ERR_DELAY and retries
the operation, but by the time it retries the server may already have
given out another delegation.
We could simply avoid delegations for (say) 30 seconds after any recall, but
this is probably too heavy handed.
We could keep a list of inodes (or inode numbers or filehandles) for recalled
delegations, but that requires memory allocation and searching.
The approach taken here is to use a bloom filter to record the filehandles
which are currently blocked from delegation, and to accept the cost of a few
false positives.
We have 2 bloom filters, each of which is valid for 30 seconds. When a
delegation is recalled the filehandle is added to one filter and will remain
disabled for between 30 and 60 seconds.
We keep a count of the number of filehandles that have been added, so when
that count is zero we can bypass all other tests.
The bloom filters have 256 bits and 3 hash functions. This should allow a
couple of dozen blocked filehandles with minimal false positives. If many
more filehandles are all blocked at once, behaviour will degrade towards
rejecting all delegations for between 30 and 60 seconds, then resetting and
allowing new delegations.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The System Type menu is getting quite long with platforms and is
inconsistent in handling of sub-arch specific options. Tidy up the menu
by making platform options a menuconfig entry containing any platform
specific config items.
[arnd: change OMAP part according to suggestion from
Tony Lindgren <tony@atomide.com>]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Following 5d01b7684b "mmc: simplify SDHCI Kconfig dependencies",
SDHCI drivers that use MMC_SDHCI_PLTFM no longer select it, but
instead depend on it. This means that multi_v7_defconfig no longer
selects it, and hence many SDHCI drivers are no longer enabled.
Explicitly enable MMC_SDHCI_PLTFM to solve this.
Fixes: 5d01b7684b ("mmc: simplify SDHCI Kconfig dependencies")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
of_get_flat_dt_prop return type is now const.
Fixes the following compilation warning introduced by commit 9d0c4dfedd
("of/fdt: update of_get_flat_dt_prop in prep for libfdt")
arch/arm/mach-exynos/exynos.c:259:6: warning:
assignment discards ‘const’ qualifier from pointer target type [enabled by default]
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This solves a problem with building with CONFIG_SMP=n due to missing
sysram_base_addr (or sysram_ns_base_addr) variables.
The new setup method is more awkward than I'd like for it to be, but
it can't be done in init_early() since ioremap is not yet available,
but it needs to happen before SMP.
Reported-by: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The factory bootloader on A385-DB boards expect the ECC strength to be
4 bits over 512 bytes. Hence, we need to specify this in the devicetree,
to prevent the kernel from assuming any different ECC scheme.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1400941030-2123-3-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The factory bootloader on A375-DB boards expect the ECC strength to be
4 bits over 512 bytes. Hence, we need to specify this in the devicetree,
to prevent the kernel from assuming any different ECC scheme.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1400941030-2123-2-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The addition of Exynos to multi-platform configs creates a mess of config
options with options appearing before the Exynos config option. This is
due to arch/arm/plat-samsung/Kconfig being included out of order with the
other Samsung platform kconfig files. Reorder the kconfig files and move
all the options into a sub-menu. Some of the options are dead, so remove
those as well.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This function should be returning an ERR_PTR() on failure instead of
NULL. Also there is a use after free bug if regmap_init() fails because
we free "func" and then dereference doing the return.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This config exists entirely to hide the cpufreq menu from the
kernel configuration unless a platform has selected it. Nothing
is actually built if this config is 'Y' and it just leads to more
patches that add a select under a platform Kconfig so that some
other CPUfreq option can be chosen. Let's remove the option so
that we can always enable CPUfreq drivers on ARM platforms.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This addresses a section mismatch problem in the IM-PD1
driver in the Integrator/AP.
The IM-PD1 contains a VIC interrupt controller and therefore
the driver calls vic_init_cascaded() which is marked __init as
irqchips are simply not hot-pluggable and specifically the VIC
is assumed to initiate only on boot.
However the module driver model of the Integrator LM bus
assumes that logic tile drivers can be probed at runtime. This
is not really the case for IM-PD1: these tiles are detected at
boot and they cannot be plugged into a running system. Before
this patch it is of course possible to modprobe them later.
By first forcing the IM-PD1 to bool we make sure this driver
gets compiled into the kernel, and we know it will be probed
only at boot time when the tiles are detected, so we can tag
its probe function __init_refok as we know it won't be called
after boot now, and the section mismatch problem goes away.
As a side effect, sysfs binding from userspace becomes
impossible, so we tag the driver to suppress the bind/unbind
sysfs attributes.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The OpenBlocks AX3-4 has a non-DT bootloader. It also comes with 1GB of
soldered on RAM, and a DIMM slot for expansion.
Unfortunately, atags_to_fdt() doesn't work in big-endian mode, so we see
the following failure when attempting to boot a big-endian kernel:
686 slab pages
17 pages shared
0 pages swap cached
[ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name
Kernel panic - not syncing: Out of memory and no killable processes...
CPU: 1 PID: 351 Comm: kworker/u4:0 Not tainted 3.15.0-rc8-next-20140603 #1
[<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14)
[<c021160c>] (show_stack) from [<c0802500>] (dump_stack+0x78/0x94)
[<c0802500>] (dump_stack) from [<c0800068>] (panic+0x90/0x21c)
[<c0800068>] (panic) from [<c02b5704>] (out_of_memory+0x320/0x340)
[<c02b5704>] (out_of_memory) from [<c02b93a0>] (__alloc_pages_nodemask+0x874/0x930)
[<c02b93a0>] (__alloc_pages_nodemask) from [<c02d446c>] (handle_mm_fault+0x744/0x96c)
[<c02d446c>] (handle_mm_fault) from [<c02cf250>] (__get_user_pages+0xd0/0x4c0)
[<c02cf250>] (__get_user_pages) from [<c02f3598>] (get_arg_page+0x54/0xbc)
[<c02f3598>] (get_arg_page) from [<c02f3878>] (copy_strings+0x278/0x29c)
[<c02f3878>] (copy_strings) from [<c02f38bc>] (copy_strings_kernel+0x20/0x28)
[<c02f38bc>] (copy_strings_kernel) from [<c02f4f1c>] (do_execve+0x3a8/0x4c8)
[<c02f4f1c>] (do_execve) from [<c025ac10>] (____call_usermodehelper+0x15c/0x194)
[<c025ac10>] (____call_usermodehelper) from [<c020e9b8>] (ret_from_fork+0x14/0x3c)
CPU0: stopping
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc8-next-20140603 #1
[<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14)
[<c021160c>] (show_stack) from [<c0802500>] (dump_stack+0x78/0x94)
[<c0802500>] (dump_stack) from [<c021429c>] (handle_IPI+0x138/0x174)
[<c021429c>] (handle_IPI) from [<c02087f0>] (armada_370_xp_handle_irq+0xb0/0xcc)
[<c02087f0>] (armada_370_xp_handle_irq) from [<c0212100>] (__irq_svc+0x40/0x50)
Exception stack(0xc0b6bf68 to 0xc0b6bfb0)
bf60: e9fad598 00000000 00f509a3 00000000 c0b6a000 c0b724c4
bf80: c0b72458 c0b6a000 00000000 00000000 c0b66da0 c0b6a000 00000000 c0b6bfb0
bfa0: c027bb94 c027bb24 60000313 ffffffff
[<c0212100>] (__irq_svc) from [<c027bb24>] (cpu_startup_entry+0x54/0x214)
[<c027bb24>] (cpu_startup_entry) from [<c0ac5b30>] (start_kernel+0x318/0x37c)
[<c0ac5b30>] (start_kernel) from [<00208078>] (0x208078)
---[ end Kernel panic - not syncing: Out of memory and no killable processes...
A similar failure will also occur if ARM_ATAG_DTB_COMPAT isn't selected.
Fix this by setting a sane default (1 GB) in the dts file.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Kevin Hilman <khilman@linaro.org>
Cc: <stable@vger.kernel.org> #v3.13+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The only remaining driver using the samsung dmadev code is the broken
samsung-ac97 sound driver. However, as found by Russell's autobuilder,
the elaborate dependency chains around it cause problems with
circular dependencies.
This is an attempt to simplify those dependencies by making the
SAMSUNG_DMADEV option user-selectable. I also try to keep the
default settings for all related options unchanged, so we don't
introduce any regressions against earlier testing on linux-next.
In particular, all s3c64xx and s5p* platforms keep selecting the
pl330 and pl08x drivers they require, but the select statement
is now moved towards the main platform option, and it remains
optional by unselecting CONFIG_DMADEVICES.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kukjin Kim <kgene.kim@samsung.com>
We can only use CMA on systems that have an MMU, because of
the requirement to use memory migration. NOMMU systems are
rather constrained to start with, but it seems reasonable
to assume that DMA allocations can still succeed in the
constrained case for remoteproc on NOMMU, so this patch
changes the da8xx implementation to not rely on CMA when
the MMU is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Robert Tivy <rtivy@ti.com>
The arm-cci code uses device tree helpers for initialization
that don't work on kernels built without CONFIG_OF. Further,
it contains an inline assembly in cci_enable_port_for_self()
that uses ARMv7 instructions and fails to build when targetting
other ARM instruction set versions.
This works around both issues by limiting the scope of the
Kconfig symbol to platforms that can actually build this driver
cleanly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
The dynamic relocation that the keystone platform performs
only works if we can pick the phys offset at boot time. It's
possible that there is another solution for this, but this
is the easiest workaround. Kernels with ARM_PATCH_PHYS_VIRT
are not portable across platforms, and I see no reason why
anyone would run a kernel without ARM_PATCH_PHYS_VIRT on
keystone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Commit d941f86fad ("ARM: l2c: AM43x: add L2 cache support") enabled
the L2 cache support for the am43xx SoC, but caused a build regression
when the driver for that cache controller is disabled:
arch/arm/mach-omap2/built-in.o: In function `am43xx_init_early':
:(.init.text+0xb20): undefined reference to `omap_l2_cache_init'
This did not happen for OMAP4, which has the same call, but enables
the l2x0 driver unconditionally. We could do the same thing for
am43xx, but it seems better to allow turning it off and make the
code work in either case.
This adds an inline wrapper for omap_l2_cache_init for the disabled
case, and removes the 'select' from OMAP4 so it becomes a user
visible option.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Fixes possible issue in case pdev name contains formatting characters.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
simple_strto*() are obsolete; use kstrto*() instead. Add proper error
checking.
Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
