Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
This contains the usual mix of fixes, cleanups, two new drivers and
several dt binding updates. The fixes are for minor issues that are
already old (4.11-rc1 and 3.9-rc1) and were found by code review and not
during usage, so I didn't sent them for earlier inclusion.
The changes to include/linux/mfd/stm32-timers.h and
drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
will also be included in the mfd and counter PR. It changes some
register definitions and affects the pwm-stm32 driver.
Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor Dooley,
David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff Johnson, Junyi
Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones, Linus Walleij, Linus
Walleij, Michael Hennerich, Nicola Di Lieto, Nicolas Ferre, Nuno Sa,
Paul Cercueil, Raag Jadav, Rob Herring, Sean Anderson, Sean Young,
Shenwei Wang, Stefan Wahren, Trevor Gamblin, Tzung-Bi Shih, Vincent
Whitchurch and William Breathitt Gray for their contributions to this
pull request; they authored changes, spend time reviewing changes and
coordinated the above mentioned immutable branch.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmaUYxcACgkQj4D7WH0S
/k7p9AgAsmKo97xC3XoXbWE2gvgK5LuqIoNfjFGGmcYZV6xsyfte2ZEoED6r6W63
l/GwbBUKhGPZM/y+VL8QoXxWRRx/XmTjsawCX0d+jHJjw+nluSIVUKMDYmQpaCPg
UehGaJKjAUqczPytxbTGrHEevArHPN1GieAcayfyOI7iqQomLklZ2VX3PKbgVcjC
3EMfyAK9JPJ3x6IvMVZQeZa4/OhLv78p2p1mLWaXjpmp5GErPHujBz4ByPtqUAgt
YWGFWlFOvy1EQsGwJ2qsUa/ZAfe5AkcmaJ4HwhBHe5Vv4pm8c9oC66DUUeKbyNMP
O5QPPEN3gr9EWL9VQaGOyfY7JAfvaQ==
=/dpI
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual mix of fixes, cleanups, two new drivers and
several dt binding updates. The fixes are for minor issues that are
already old (4.11-rc1 and 3.9-rc1) and were found by code review and
not during usage, so I didn't sent them for earlier inclusion.
The changes to include/linux/mfd/stm32-timers.h and
drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
will also be included in the mfd and counter pulls. It changes some
register definitions and affects the pwm-stm32 driver.
Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor
Dooley, David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff
Johnson, Junyi Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones,
Linus Walleij, Linus Walleij, Michael Hennerich, Nicola Di Lieto,
Nicolas Ferre, Nuno Sa, Paul Cercueil, Raag Jadav, Rob Herring, Sean
Anderson, Sean Young, Shenwei Wang, Stefan Wahren, Trevor Gamblin,
Tzung-Bi Shih, Vincent Whitchurch and William Breathitt Gray for their
contributions to this pull request; they authored changes, spend time
reviewing changes and coordinated the above mentioned immutable
branch"
* tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (38 commits)
pwm: axi-pwmgen: add .max_register to regmap
dt-bindings: pwm: at91: Add sama7d65 compatible string
pwm: atmel-tcb: Make private data variable naming consistent
pwm: atmel-tcb: Simplify checking the companion output
pwm: Allow pwm state transitions from an invalid state
pwm: xilinx: Simplify using devm_ functions
pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlock
pwm: Register debugfs operations after the pwm class
pwm: imx-tpm: Enable pinctrl setting for sleep state
pwm: lpss: drop redundant runtime PM handles
pwm: lpss: use devm_pm_runtime_enable() helper
pwm-stm32: Make use of parametrised register definitions
dt-bindings: pwm: imx: remove interrupt property from required
pwm: meson: Add support for Amlogic S4 PWM
pwm: Add GPIO PWM driver
dt-bindings: pwm: Add pwm-gpio
pwm: Drop pwm_apply_state()
bus: ts-nbus: Use pwm_apply_might_sleep()
...
TI K3 SoC's support eQEP hardware, so add ARCH_K3 to the depends
so the TI eQEP driver can be built for K3 devices.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20240612135538.2447938-9-jm@ti.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Add new compatible for ti-am62-eqep for TI K3 SoC's.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20240612135538.2447938-3-jm@ti.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
The ti_eqep_count_from_counter() function is just a wrapper around
counter_priv(). counter_priv() can be used directly, so we don't need
the wrapper function. Remove it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240609-ti-eqep-cleanup-v1-2-9d67939c763a@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Since commit 8817c2d03a ("counter: ti-eqep: Convert to counter_priv()
wrapper") the counter field in struct ti_eqep_cnt is not used anymore.
Remove it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240609-ti-eqep-cleanup-v1-1-9d67939c763a@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/counter/ftm-quaddec.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-ftm-quaddec-v1-1-1bbdf705ad31@quicinc.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
These two defines have the same purpose and this change doesn't
introduce any differences in drivers/counter/stm32-timer-cnt.o.
The only difference between the two is that
TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE
while
TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE
. That makes it necessary to have an explicit "+ 1" in the user code,
but IMHO this is a good thing as this is the code locatation that
"knows" that for software channel 1 you have to use TIM_DIER_CC2IE
(because software guys start counting at 0, while the relevant hardware
designer started at 1).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: William Breathitt Gray <wbg@kernel.org>
Link: https://lore.kernel.org/r/126bd153a03f39e42645573eecf44ffab5354fc7.1718791090.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
The TI eQEP clock is both a functional and interface clock. Since it is
required for the device to function, we should be enabling it at probe.
Up to now, we've just been lucky that the clock was enabled by something
else on the system already.
Fixes: f213729f67 ("counter: new TI eQEP driver")
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240621-ti-eqep-enable-clock-v2-1-edd3421b54d4@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reduce boilerplate by leveraging the COUNTER_COMP_FREQUENCY() macro to
define the "frequency" extension.
Link: https://lore.kernel.org/r/ZfxhEKdSi1amfcJC@ishi
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/bf78595f6a49be0b6bb403b466c13177d72c02b7.1710057753.git.u.kleine-koenig@pengutronix.de
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/f70902b2aabecaa9295c28629cd7a8a0e6eb06d0.1710057753.git.u.kleine-koenig@pengutronix.de
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Add support for capture events. Captured counter value for each channel
can be retrieved through CCRx register.
STM32 timers can have up to 4 capture channels (on input channel 1 to
channel 4), hence need to check the number of channels before reading
the capture data.
The capture configuration is hard-coded to capture signals on both edges
(non-inverted). Interrupts are used to report events independently for
each channel.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-11-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Add support overflow events. Also add the related validation and
configuration routine. Register and enable interrupts to push events.
STM32 Timers can have either 1 global interrupt, or 4 dedicated interrupt
lines. Request only the necessary interrupt, e.g. either global interrupt
that can report all event types, or update interrupt only for overflow
event.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-10-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Probe the number of capture compare channels, by writing CCER register bits
and read them back. Take care to restore the register original value.
This is a precursor patch to support capture channels.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-9-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Simply add channels 3 and 4 that can be used for capture. Statically
add them, despite some timers doesn't have them. Rather rely on
stm32_action_read that will report "none" action for these currently.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-8-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
This is a precursor patch to support capture channels on all possible
channels and stm32 timer types. Original driver was intended to be used
only as quadrature encoder and simple counter on internal clock.
So, add a check on encoder capability, so the driver may be probed for
timer instances without encoder feature. This way, all timers may be used
as simple counter on internal clock, starting from here.
Encoder capability is retrieved by using the timer index (originally in
stm32-timer-trigger driver and dt-bindings). The need to keep backward
compatibility with existing device tree lead to parse aside trigger node.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-7-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
There's a prescaler in between the selected input signal used for
counting (CK_PSC), and the counter input (CK_CNT).
So add the "prescaler" extension to the counter.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-6-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Introduce the internal clock signal, used to count when in simple rising
function. Also add the "frequency" extension to the clock signal.
With this patch, signal action reports a consistent state when "increase"
function is used, and the counting frequency:
$ echo increase > function
$ grep -H "" signal*_action
signal0_action:none
signal1_action:none
signal2_action:rising edge
$ echo 1 > enable
$ cat count
25425
$ cat count
44439
$ cat ../signal2/frequency
208877930
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-5-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Adopt signals definitions to ease later signals additions.
There are no intended functional changes here.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-4-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The STM32 timer may count on various sources or channels. The counter
isn't specifically counting on channe1 1. So rename it to avoid a
confusion.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-3-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Drop the Quadrature convention in the signal name. On stm32-timer:
- Quadrature A signal corresponds to timer input ch1, hence "Channel 1"
- Quadrature B signal corresponds to timer input ch2, hence "Channel 2".
So name these signals after their channel. I suspect it referred to the
(unique) quadrature counter support earlier, but the physical input
really is CH1/CH2. This will be easier to support other counter modes.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-2-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
counter_device_type variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240219-device_cleanup-counter-v1-1-24d0316ae815@marliere.net
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Now that the driver core can properly handle constant struct bus_type,
move the counter_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-counter-v1-1-cef9dd719bdc@marliere.net
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The counter_get_ext() function would incorrectly refer to the first
element of the extensions array to handle component array extensions
when they are located at a different index; a fix is provided to index
to the correct element in the array for this case. A fix for the
microchip-tcb-capture is provided as well to correct an inverted
internal GCLK logic for clock selection.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZPpOEgAKCRC1SFbKvhIj
KxAlAQCyTD0T0wA4iMegviHRb/Rw66Ae42XzmEUiwCjAPY+F4wD/ZJ5ULT+Tq0fE
uJJIhrj3vNglngt7rbCboJ2Ve1jyPgs=
=1Ztq
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
First set of Counter fixes for 6.6
The counter_get_ext() function would incorrectly refer to the first
element of the extensions array to handle component array extensions
when they are located at a different index; a fix is provided to index
to the correct element in the array for this case. A fix for the
microchip-tcb-capture is provided as well to correct an inverted
internal GCLK logic for clock selection.
* tag 'counter-fixes-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Fix the use of internal GCLK logic
counter: chrdev: fix getting array extensions
As per the datasheet, the clock selection Bits 2:0 – TCCLKS[2:0] should
be set to 0 while using the internal GCLK (TIMER_CLOCK1).
Fixes: 106b104137 ("counter: Add microchip TCB capture counter")
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://lore.kernel.org/r/20230905100835.315024-1-dharma.b@microchip.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
- Add support for the Cirrus Logic CS42L43 Audio CODEC
- Fix-ups
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree cache
- Ensure correct includes are present and remove some that are not required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for spin_{un}lock_irq{save,restore}()
- Bug Fixes
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting
-----BEGIN PGP SIGNATURE-----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=MNYe
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull NFD updates from Lee Jones:
"New Drivers:
- Add support for the Cirrus Logic CS42L43 Audio CODEC
Fix-ups:
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree
cache
- Ensure correct includes are present and remove some that are not
required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better
ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for
spin_{un}lock_irq{save,restore}()
Bug Fixes:
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting"
* tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits)
mfd: mc13xxx: Simplify device data fetching in probe()
mfd: rz-mtu3: Replace raw_spin_lock->spin_lock()
mfd: rz-mtu3: Reduce critical sections
mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning
mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning
mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning
mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning
mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning
mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning
mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning
mfd: rn5t618: Remove redundant of_match_ptr()
mfd: lochnagar-i2c: Remove redundant of_match_ptr()
mfd: stpmic1: Remove redundant of_match_ptr()
mfd: act8945a: Remove redundant of_match_ptr()
mfd: rsmu_spi: Remove redundant of_match_ptr()
mfd: altera-a10sr: Remove redundant of_match_ptr()
mfd: rsmu_i2c: Remove redundant of_match_ptr()
mfd: tc3589x: Remove redundant of_match_ptr()
...
When trying to watch a component array extension, and the array isn't the
first extended element, it fails as the type comparison is always done on
the 1st element. Fix it by indexing the 'ext' array.
Example on a dummy struct counter_comp:
static struct counter_comp dummy[] = {
COUNTER_COMP_DIRECTION(..),
...,
COUNTER_COMP_ARRAY_CAPTURE(...),
};
static struct counter_count dummy_cnt = {
...
.ext = dummy,
.num_ext = ARRAY_SIZE(dummy),
}
Currently, counter_get_ext() returns -EINVAL when trying to add a watch
event on one of the capture array element in such example.
Fixes: d2011be1e2 ("counter: Introduce the COUNTER_COMP_ARRAY component type")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230829134029.2402868-2-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Fixes: 254d3a7274 ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be8907359 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e16 ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174357.4053541-1-robh@kernel.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
In commit d428487471 ("counter: i8254: Introduce the Intel 8254
interface library module"), the misplacement of the I8254 Kconfig entry
results in the "Counter support" submenu items disappearing in
menuconfig. A fix is provided to reposition the I8254 Kconfig entry to
restore the intended submenu behavior.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZJoKsAAKCRC1SFbKvhIj
K3JGAQDIzr7hWxQhcTm5/H7A/Vg5InFetpKOUXSMh1yIhc7veQD/XQ7tt7qocpLz
h69UcZGkbtEj7sGK/LY8jCL5mV77cQQ=
=0QaM
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
First set of Counter fixes for 6.5
In commit d428487471 ("counter: i8254: Introduce the Intel 8254
interface library module"), the misplacement of the I8254 Kconfig entry
results in the "Counter support" submenu items disappearing in
menuconfig. A fix is provided to reposition the I8254 Kconfig entry to
restore the intended submenu behavior.
* tag 'counter-fixes-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: Fix menuconfig "Counter support" submenu entries disappearance
The current placement of the I8254 Kconfig entry results in the
disappearance of the "Counter support" submenu items in menuconfig. Move
the I8254 above the menuconfig COUNTER entry to restore the intended
submenu behavior.
Fixes: d428487471 ("counter: i8254: Introduce the Intel 8254 interface library module")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Closes: https://lore.kernel.org/all/32ddaa7b-53a8-d61f-d526-b545bd561337@linux.intel.com/
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230620170159.556788-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.
Changes
* 104-quad-8
- Remove reference in Kconfig to 25-bit counter value
- Utilize bitfield access macros
- Refactor to buffer states for CMR, IOR, and IDR
- Utilize helper functions to handle PR, FLAG and PSC
- Migrate to the regmap API
* i8254
- Introduce the Intel 8254 interface library module
* stm32-timer-cnt
- Reset TIM_TISEL to its default value in probe
* tools/counter
- Add .gitignore
- Remove lingering 'include' directories on make clean
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZIihZQAKCRC1SFbKvhIj
K1wZAQCnujwsCYExil8fCHgdXufA+KsC5J4Clay7CLq5KmUdgwD+P9EJ5Hd37OeO
tAV6Pt4yEmQQBfXQgMdD2lk1yf0iGg8=
=r3E4
-----END PGP SIGNATURE-----
Merge tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.5 cycle
Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.
Changes
* 104-quad-8
- Remove reference in Kconfig to 25-bit counter value
- Utilize bitfield access macros
- Refactor to buffer states for CMR, IOR, and IDR
- Utilize helper functions to handle PR, FLAG and PSC
- Migrate to the regmap API
* i8254
- Introduce the Intel 8254 interface library module
* stm32-timer-cnt
- Reset TIM_TISEL to its default value in probe
* tools/counter
- Add .gitignore
- Remove lingering 'include' directories on make clean
* tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: i8254: Introduce the Intel 8254 interface library module
counter: 104-quad-8: Migrate to the regmap API
counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
counter: 104-quad-8: Utilize bitfield access macros
tools/counter: Makefile: Remove lingering 'include' directories on make clean
tools/counter: Add .gitignore
counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe
counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8254 Programmable Interval Timer
(PIT).
The Intel 8254 PIT first appeared in the early 1980s and was used
initially in IBM PC compatibles. The popularity of the original Intel
825x family of chips led to many subsequent variants and clones of the
interface in various chips and integrated circuits. Although still
popular, interfaces compatible with the Intel 8254 PIT are nowdays
typically found embedded in larger VLSI processing chips and FPGA
components rather than as discrete ICs.
A CONFIG_I8254 Kconfig option is introduced by this patch. Modules
wanting access to these i8254 library functions should select this
Kconfig option, and import the I8254 symbol namespace.
Link: https://lore.kernel.org/r/f6fe32c2db9525d816ab1a01f45abad56c081652.1681665189.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The 104_QUAD_8 counter driver uses devm_ioport_map() without depending
on HAS_IOPORT_MAP. This means the driver is not usable on platforms such
as s390 which do not support I/O port mapping. Add the missing
HAS_IOPORT_MAP dependency to make this explicit.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-8-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. With regmap we get boundary checks, read-write
permissions, operation synchronization locks, and more for free. Most
important of all, rather than rolling our own we utilize implementations
that are known to work and gain from any future improvements and fixes
that come.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/1f1f7920d2be94aedb6fdf49f429fe6137c8cb24.1681753140.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The 104-quad-8 driver buffers the device configuration states
separately, however each device has only three control registers: CMR,
IOR, and IDR. Refactoring to buffer the states of these control
registers rather than each configuration separately results in succinct
code that more closely matches what is happening on the device.
Link: https://lore.kernel.org/r/48071415aed43ecdd8595174191b0d906205a9e3.1681753140.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The driver assumes that the input selection register (TIM_TISEL) is at
its reset default value. Usually this is the case, but the bootloader
might have modified it.
This bases on a similar patch submitted by Olivier Moysan for pwm-stm32.
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230413212339.3611722-1-u.kleine-koenig@pengutronix.de/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Support for 25-bit counter values was removed in commit 4aa3b75c74
("counter: 104-quad-8: Fix race condition between FLAG and CNTR reads").
Adjust the Kconfig description of CONFIG_104_QUAD_8 to remove reference
of 25-bit counter values.
Link: https://lore.kernel.org/r/20230410134516.102886-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
- Add support for Renesas RZ/G2L MTU3
- New Device Support
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
- Remove Device Support
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
- New Functionality
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
- Fix-ups
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
- Bug Fixes
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths
-----BEGIN PGP SIGNATURE-----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=EBtX
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
These error paths need to call mutex_unlock(&priv->lock) before
returning. The lock is taken in rz_mtu3_lock_if_counter_is_valid().
Fixes: 25d21447d896 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/7b535d6b-6031-493a-84f6-82842089e637@kili.mountain
Add RZ/G2L MTU3a counter driver. This IP supports the following
phase counting modes on MTU1 and MTU2 channels
1) 16-bit phase counting modes on MTU1 and MTU2 channels.
2) 32-bit phase counting mode by cascading MTU1 and MTU2 channels.
This patch adds 3 counter value channels.
count0: 16-bit phase counter value channel on MTU1
count1: 16-bit phase counter value channel on MTU2
count2: 32-bit phase counter value channel by cascading
MTU1 and MTU2 channels.
The external input phase clock pin for the counter value channels
are as follows:
count0: "MTCLKA-MTCLKB"
count1: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
count2: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
Use the sysfs variable "external_input_phase_clock_select" to select the
external input phase clock pin and "cascade_counts_enable" to enable/
disable cascading of channels.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-5-biju.das.jz@bp.renesas.com
Signal 16 and higher represent the device's Index lines. The
priv->preset_enable array holds the device configuration for these Index
lines. The preset_enable configuration is active low on the device, so
invert the conditional check in quad8_action_read() to properly handle
the logical state of preset_enable.
Fixes: f1d8a071d4 ("counter: 104-quad-8: Add Generic Counter interface support")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230316203426.224745-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The Counter (CNTR) register is 24 bits wide, but we can have an
effective 25-bit count value by setting bit 24 to the XOR of the Borrow
flag and Carry flag. The flags can be read from the FLAG register, but a
race condition exists: the Borrow flag and Carry flag are instantaneous
and could change by the time the count value is read from the CNTR
register.
Since the race condition could result in an incorrect 25-bit count
value, remove support for 25-bit count values from this driver;
hard-coded maximum count values are replaced by a LS7267_CNTR_MAX define
for consistency and clarity.
Fixes: 28e5d3bb03 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8")
Cc: <stable@vger.kernel.org> # 6.1.x
Cc: <stable@vger.kernel.org> # 6.2.x
Link: https://lore.kernel.org/r/20230312231554.134858-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Commit dfeef15e73 ("counter: microchip-tcp-capture: Add appropriate arch
deps for TCP driver") intends to add appropriate dependencies for the
config MICROCHIP_TCB_CAPTURE. It however prefixes the intended configs with
CONFIG, but in Kconfig files in contrast to source files, the configs are
referenced to without prefixing them with CONFIG.
Fix the dependency references due to this minor misconception.
Fixes: dfeef15e73 ("counter: microchip-tcp-capture: Add appropriate arch deps for TCP driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230118074659.5909-1-lukas.bulwahn@gmail.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
