cppcheck warning:
sound/soc/amd/renoir/acp3x-pdm-dma.c:132:17: style: Variable
'pdm_dma_enable' is assigned a value that is never
used. [unreadVariable]
pdm_dma_enable = 0x00;
^
sound/soc/amd/renoir/acp3x-pdm-dma.c:156:18: style: Variable
'pdm_dma_enable' is assigned a value that is never
used. [unreadVariable]
pdm_dma_enable = 0x00;
^
indeed those values are never used because the timeout is reset.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326215927.936377-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmBkoFEACgkQJNaLcl1U
h9BqTgf5AUfR5NbQgJIUMtdMsuz+bthKGuPnpYhYzNUH0io9i3Sjpt0Mbw21dLp2
nXW+70BH0tJZBGR4DNGpmcpBLH5WPdOR9WIv4vCYy9Pr0uCGGKF/JkGeZAg7/llF
C3+yDfTnF0AvR+74xbf/LTjBPGja/08PED1ZC00NAkLhE3C0Pa/VQ0NaEtPUULWE
ZOWboF7hfQUeGzGPTqNp4Cy0/Pzokk6Fvl4kgfrxjNWO7ojIv9mCAvmYbusLW7NU
3Ph5VGsIuyMeorEoAVOFaBY2nrYG/mFZyzTNWJMgvF1MdeigMPNfbbffrUK0sn6k
e81zgWbwxboEujQ91/EZU7glIqtb6A==
=rr4V
-----END PGP SIGNATURE-----
Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi Mark
I want to add new audio-graph-card2 driver which can support
not only DPCM, but also Multi-CPU/Codec, and Codec2Codec.
And it is also supporting user customization.
But before supporting such driver, we need to cleanup existing
simple-card / audio-graph, because these and new driver are
sharing code.
This patch-set are cleanup and prepare for Multi-CPU/Codec support.
Kuninori Morimoto (6):
ASoC: simple-card-utils.c: remove old comment
ASoC: simple-card-utils: alloc dai_link information for CPU/Codec/Platform
ASoC: audio-graph: count DAI / link numbers as in order
ASoC: audio-graph: cleanup graph_for_each_link()
ASoC: simple-card: count DAI / link numbers as in order
ASoC: simple-card: cleanup graph_for_each_link()
include/sound/simple_card_utils.h | 7 +-
sound/soc/generic/audio-graph-card.c | 112 +++++++++++++------------
sound/soc/generic/simple-card-utils.c | 20 +++--
sound/soc/generic/simple-card.c | 115 +++++++++++++++-----------
4 files changed, 143 insertions(+), 111 deletions(-)
--
2.25.1
The SoC sound core will generate a driver name by normalizing the card
name. However, most of the time that name does not tell anything about
the driver and is therefore useless for this purpose.
Make the driver name more useful by setting it explicitly during card
initialization.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210330180657.1867971-1-thierry.reding@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Chuwi Hi8 tablet is using an analog mic on IN1 and has its
jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
It also only has 1 speaker.
Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210325221054.22714-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times.
Because of this kind of complex background, it needs to use local
varuable for it, and each call-back functions need to care about it.
Now, 1st and 2nd DT link check are using same order,
thus we can share same code. This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875z1e1tov.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times at 2nd DT link check.
But it doesn't do it at 1st DT link check.
for (li.cpu = 1; li.cpu >= 0; li.cpu--) {
/*
* Detect all CPU first, and Detect all Codec 2n
*
* In Normal sound case, all DAIs are detected
* as "CPU-Codec".
*
* In DPCM sound case,
* all CPUs are detected as "CPU-dummy", and
* all Codecs are detected as "dummy-Codec".
* To avoid random sub-device numbering,
* detect "dummy-Codec" in last;
*/
ret = simple_for_each_link(...);
...
}
To prepare supporting multi-CPU/Codec, and code cleanup,
this patch use same loop for 1st DT link check, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877dlu1tp2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times.
Because of this kind of complex background, it needs to use local
varuable for it, and each call-back functions need to care about it.
Now, 1st and 2nd DT link check are using same order,
thus we can share same code. This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s6a1tpf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times at 2nd DT link check.
But it doesn't do it at 1st DT link check.
for (li.cpu = 1; li.cpu >= 0; li.cpu--) {
/*
* Detect all CPU first, and Detect all Codec 2n
*
* In Normal sound case, all DAIs are detected
* as "CPU-Codec".
*
* In DPCM sound case,
* all CPUs are detected as "CPU-dummy", and
* all Codecs are detected as "dummy-Codec".
* To avoid random sub-device numbering,
* detect "dummy-Codec" in last;
*/
ret = graph_for_each_link(...);
...
}
To prepare supporting multi-CPU/Codec, and code cleanup,
this patch use same loop for 1st DT link check, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6qq1tpp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card / audio-graph are assuming single CPU/Codec/Platform on
dai_link. Because of it, it is difficult to support Multi-CPU/Codec.
This patch allocs CPU/Codec/Platform dai_link imformation
instead of using existing props information. It can update to
multi-CPU/Codec, but is still assuming single-CPU/Codec for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blb61tpv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit adb76b5b9c ("ASoC: soc-core: remove legacy style dai_link")
removed snd_soc_init_multicodec(). The comment on asoc_simple_init_priv()
is no longer needed. This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czvm1tq2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to manage the kcontrol entries association for the LED trigger
from the user space. This patch adds a layer to the sysfs tree like:
/sys/devices/virtual/sound/ctl-led/mic
+ card0
| + attach
| + detach
| ...
+ card1
+ attach
...
Operations:
attach and detach
- amixer style ID is accepted and easy strings for numid and
simple names
reset
- reset all associated kcontrol entries
list
- list associated kcontrol entries (numid values only)
Additional symlinks:
/sys/devices/virtual/sound/ctl-led/mic/card0/card ->
/sys/class/sound/card0
/sys/class/sound/card0/controlC0/led-mic ->
/sys/devices/virtual/sound/ctl-led/mic/card0
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-7-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create SYSFS/devices/virtual/sound/ctl-led tree
(with SYSFS/class/sound/ctl-led symlink).
speaker/
+-- mode
+-- brightness
mic/
+-- mode
+-- brightness
Copy the idea from the HDA driver and allow to set the audio
LEDs based on the various modes:
- follow mute
- follow moute (inverted to follow mute)
- off
- on
Also, the actual LED state is exposed.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-6-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the new snd-ctl-led module, we have a generic way
to trigger audio LEDs based on the sound control changes.
Remove the custom implementation from the HDA driver.
Move the LED initialization before snd_hda_gen_parse_auto_config()
call in all drivers to create marked controls there.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-5-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent laptops have usually two LEDs assigned to reflect
the speaker and microphone mute state. This implementation
adds a tiny layer on top of the control API which calculates
the state for those LEDs using the driver callbacks.
Two new access flags are introduced to describe the controls
which affects the audio path settings (an easy code change
for drivers).
The LED resource can be shared with multiple sound cards with
this code. The user space controls may be added to the state
chain on demand, too.
This code should replace the LED code in the HDA driver and
add a possibility to easy extend the other drivers (ASoC
codecs etc.).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The layer registration allows to handle an extra functionality
on top of the control API. It can be used for the audio
LED control for example.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-3-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This helper is required for the following generic LED mute
patch. The helper also simplifies some other functions.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-2-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Q6afe-clocks driver can get reprobed. For example if the APR services
are restarted after the firmware crash. However currently Q6afe-clocks
driver will oops because hw.init will get cleared during first _probe
call. Rewrite the driver to fill the clock data at runtime rather than
using big static array of clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Fixes: 520a1c396d ("ASoC: q6afe-clocks: add q6afe clock controller")
Link: https://lore.kernel.org/r/20210327092857.3073879-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a function to find a match between pcm hw params and SSP
DAI config. Config is matched against sample rate and if match is found
current config is set. If match isn't found last matched config is left
as current i.e. current config is not touched. Functionality for SSP
DAIs with 1 config remains the same as before.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SSP DAIs don't have hw params callback function as there
wasn't anything to setup after initial topology loading. After enabling
multiple DAI configs the current config can be sent in the callback.
This patch changes the way SSP config ipc is sent to the dsp. Before it
was only sent once in topology loading, but now it will be additionally
sent always when stream is opened. Mechanism is similar as with HDA
DAIs.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC parses multiple hw_configs defined in topology. However currently
in SOF only the first config is used and others are discarded. First
change SOF driver to parse and save possible multiple configs in ssp
case. Also save the default config value provided by ASoC. Functionality
with only one defined config stays the same.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes the following sparse warnings:
sound/soc/fsl/fsl_rpmsg.c:45:45: sparse: sparse: Using plain integer as NULL pointer
sound/soc/fsl/fsl_rpmsg.c:45:56: sparse: sparse: Using plain integer as NULL pointer
Fixes: b73d9e6225 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1616988868-971-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix ACPI dependency kernel warning produced by powerpc
allyesconfig.
sound/soc/amd/acp-da7219-max98357a.c:684:28: warning:
'cz_rt5682_card' defined but not used [-Wunused-variable]
sound/soc/amd/acp-da7219-max98357a.c:671:28: warning: 'cz_card'
defined but not used [-Wunused-variable]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1616777074-5151-2-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
while CONFIG_SND_DESIGNWARE_PCM is not set, building with W=1 shows this:
sound/soc/dwc/local.h:127:6: warning: no previous prototype for ‘dw_pcm_push_tx’ [-Wmissing-prototypes]
void dw_pcm_push_tx(struct dw_i2s_dev *dev) { }
^~~~~~~~~~~~~~
sound/soc/dwc/local.h:128:6: warning: no previous prototype for ‘dw_pcm_pop_rx’ [-Wmissing-prototypes]
void dw_pcm_pop_rx(struct dw_i2s_dev *dev) { }
^~~~~~~~~~~~~
sound/soc/dwc/local.h:129:5: warning: no previous prototype for ‘dw_pcm_register’ [-Wmissing-prototypes]
int dw_pcm_register(struct platform_device *pdev)
^~~~~~~~~~~~~~~
Change these to inline functions to fix the warnings.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210329150524.18184-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Asymmetric multiprocessor, there is Cortex-A core and Cortex-M core,
Linux is running on A core, RTOS is running on M core.
The audio hardware device can be controlled by Cortex-M device,
So audio playback/capture can be handled by M core.
Rpmsg is the interface for sending and receiving msg to and from M
core, that we can create a virtual sound on Cortex-A core side.
A core will tell the Cortex-M core sound format/rate/channel,
where is the data buffer, what is the period size, when to start,
when to stop and when suspend or resume happen, each of this behavior
there is defined rpmsg command.
Especially we designed the low power audio case, that is to
allocate a large buffer and fill the data, then Cortex-A core can go
to sleep mode, Cortex-M core continue to play the sound, when the
buffer is consumed, Cortex-M core will trigger the Cortex-A core to
wakeup to fill data.
changes in v5:
- remove unneeded property in binding doc and driver
- update binding doc according to Rob's comments.
- Fix link issue reported by kernel test robot
changes in v4:
- remove the sound card node, merge the property to cpu dai node
according to Rob's comments.
- sound card device will be registered by cpu dai driver.
- Fix do_div issue reported by kernel test robot
changes in v3:
- add local refcount for clk enablement in hw_params()
- update the document according Rob's comments
changes in v2:
- update codes and comments according to Mark's comments
Shengjiu Wang (6):
ASoC: soc-component: Add snd_soc_pcm_component_ack
ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg
ASoC: dt-bindings: fsl_rpmsg: Add binding doc for rpmsg audio device
ASoC: imx-audio-rpmsg: Add rpmsg_driver for audio channel
ASoC: imx-pcm-rpmsg: Add platform driver for audio base on rpmsg
ASoC: imx-rpmsg: Add machine driver for audio base on rpmsg
.../devicetree/bindings/sound/fsl,rpmsg.yaml | 108 +++
include/sound/soc-component.h | 3 +
sound/soc/fsl/Kconfig | 30 +
sound/soc/fsl/Makefile | 6 +
sound/soc/fsl/fsl_rpmsg.c | 279 ++++++
sound/soc/fsl/fsl_rpmsg.h | 35 +
sound/soc/fsl/imx-audio-rpmsg.c | 140 +++
sound/soc/fsl/imx-pcm-rpmsg.c | 918 ++++++++++++++++++
sound/soc/fsl/imx-pcm-rpmsg.h | 512 ++++++++++
sound/soc/fsl/imx-rpmsg.c | 150 +++
sound/soc/soc-component.c | 14 +
sound/soc/soc-pcm.c | 2 +
12 files changed, 2197 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
create mode 100644 sound/soc/fsl/fsl_rpmsg.c
create mode 100644 sound/soc/fsl/fsl_rpmsg.h
create mode 100644 sound/soc/fsl/imx-audio-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.h
create mode 100644 sound/soc/fsl/imx-rpmsg.c
--
2.27.0
The call sequence in wm8960_configure_clocking is
ret = wm8960_configure_sysclk();
if (ret >= 0)
goto configure_clock;
....
ret = wm8960_configure_pll();
configure_clock:
...
wm8960_configure_sysclk is called before wm8960_configure_pll, as
there is bitclk relax on both functions, so wm8960_configure_sysclk
always return success, then wm8960_configure_pll() never be called.
With this case:
aplay -Dhw:0,0 -d 5 -r 48000 -f S24_LE -c 2 audio48k24b2c.wav
the required bitclk is 48000 * 24 * 2 = 2304000, bitclk got from
wm8960_configure_sysclk is 3072000, but if go to wm8960_configure_pll.
it can get correct bitclk 2304000.
So bitclk relax condition should be removed in wm8960_configure_sysclk,
then wm8960_configure_pll can be called, and there is also bitclk relax
function in wm8960_configure_pll.
Fixes: 3c01b9ee2a ("ASoC: codec: wm8960: Relax bit clock computation")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1614740862-30196-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
3 new controls are added.
"OVC Autorestart Switch" : controls whether or not the speaker amplifier
automatically re-enables after an overcurrent fault condition.
"THERM Autorestart Switch" : controls whether or not the device
automatically resumes playback when the die temperature recovers from
thermal shutdown.
"CMON Autorestart Switch" : controls whether or not the device
automatically resumes playback when the clock returns after stopping.
Above Auto Restart functions are enabled by default.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-3-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform device is not registered by device tree or
cpu dai driver, it is registered by the rpmsg channel,
So add a dedicated machine driver to handle this case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-7-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform driver based on rpmsg is the interface for sending and
receiving rpmsg to and from M core. It will tell the Cortex-M core
sound format/rate/channel, where is the data buffer, where is
the period size, when to start, when to stop and when suspend
or resume happen, each this behavior there is defined rpmsg
command.
Especially we designed the low power audio case, that is to
allocate a large buffer and fill the data, then Cortex-A core can go
to sleep mode, Cortex-M core continue to play the sound, when the
buffer is consumed, Cortex-M core will trigger the Cortex-A core to
wake up.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is used to accept the message from rpmsg audio
channel, and if this driver is probed, it will help to register
the platform driver, the platform driver will use this
audio channel to send and receive messages to and from Cortex-M
core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a cpu dai driver for rpmsg audio use case,
which is mainly used for getting the user's configuration
from devicetree and configure the clocks which is used by
Cortex-M core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_soc_pcm_component_ack back, which can be used to get an
updated buffer pointer in the platform driver.
On Asymmetric multiprocessor, this pointer can be sent to Cortex-M
core for audio processing.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi All,
Here is v4 of my series to rework the arizona codec jack-detect support
to use the snd_soc_jack helpers instead of direct extcon reporting.
As discussed before here is a resend rebased on 5.12-rc2, making sure that
all patches this depends on are in place.
Lee, can you pick-up patches 1-6 through the MFD tree and then send a
pull-req to Mark so that Mark can merge the Asoc parts throught the ASoC
tree ?
Patches 2-6 touch drivers/extcon, these all have an Ack from Chanwoo Choi
for merging these through the MFD tree.
Here is some more generic info on this series from the previous
cover-letter:
This is done by reworking the extcon driver into an arizona-jackdet
library and then modifying the codec drivers to use that directly,
replacing the old separate extcon child-devices and extcon-driver.
This brings the arizona-codec jack-detect handling inline with how
all other ASoC codec driver do this. This was developed and tested on
a Lenovo Yoga Tablet 1051L with a WM5102 codec.
This was also tested by Charles Keepax, one of the Cirrus Codec folks.
Regards,
Hans
Hans de Goede (13):
mfd: arizona: Drop arizona-extcon cells
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack
has been unplugged
extcon: arizona: Fix various races on driver unbind
extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol")
call
extcon: arizona: Always use pm_runtime_get_sync() when we need the
device to be awake
ASoC/extcon: arizona: Move arizona jack code to
sound/soc/codecs/arizona-jack.c
ASoC: arizona-jack: Move jack-detect variables to struct arizona_priv
ASoC: arizona-jack: Use arizona->dev for runtime-pm
ASoC: arizona-jack: convert into a helper library for codec drivers
ASoC: arizona-jack: Use snd_soc_jack to report jack events
ASoC: arizona-jack: Cleanup logging
ASoC: arizona: Make the wm5102, wm5110, wm8997 and wm8998 drivers use
the new jack library
ASoC: Intel: bytcr_wm5102: Add jack detect support
MAINTAINERS | 3 +-
drivers/extcon/Kconfig | 8 -
drivers/extcon/Makefile | 1 -
drivers/mfd/arizona-core.c | 20 -
sound/soc/codecs/Makefile | 2 +-
.../soc/codecs/arizona-jack.c | 577 +++++++-----------
sound/soc/codecs/arizona.h | 44 ++
sound/soc/codecs/wm5102.c | 12 +-
sound/soc/codecs/wm5110.c | 12 +-
sound/soc/codecs/wm8997.c | 14 +-
sound/soc/codecs/wm8998.c | 9 +
sound/soc/intel/boards/bytcr_wm5102.c | 28 +-
12 files changed, 325 insertions(+), 405 deletions(-)
rename drivers/extcon/extcon-arizona.c => sound/soc/codecs/arizona-jack.c (76%)
--
2.30.1
Add jack detect support by creating a jack and calling
snd_soc_component_set_jack to register the created jack
with the codec.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-14-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make all arizona codec drivers for which drivers/mfd/arizona-core.c used
to instantiate a "arizona-extcon" child-device use the new arizona-jack.c
library for jack-detection.
This has been tested on a Lenovo Yoga Tablet 2 1051L with a WM5102 codec.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-13-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cleanup the use of dev_foo functions used for logging:
1. Many of these are unnecessarily split over multiple lines
2. Use dev_err_probe() in cases where we might get a -EPROBE_DEFER
return value
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-12-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the snd_soc_jack code to report jack events, instead of using extcon
for reporting the cable-type + an input_dev for reporting the button
presses.
The snd_soc_jack code will report the cable-type through both input_dev
events and through ALSA controls and the button-presses through input_dev
events.
Note that this means that when the codec drivers are moved over to use
the new arizona-jack.c library code instead of having a separate MFD
extcon cell with the extcon-arizona.c driver, we will no longer report
extcon events to userspace for cable-type changes. This should not be
a problem since "standard" Linux distro userspace does not (and has
never) used the extcon class interface for this. Android does have
support for the extcon class interface, but that was introduced in
the same release as support for input_dev cable-type events, so this
should not be a problem for Android either.
Note this also reduces ARIZONA_MAX_MICD_RANGE from 8 to 6, this is
ok to do since this info is always provided through pdata (or defaults)
and cannot be overridden from devicetree. All in-kernel users of the
pdata (and the fallback defaults) define 6 or less buttons/ranges.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-11-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the arizona extcon driver into a helper library for direct use
from the arizona codec-drivers, rather then being bound to a separate
MFD cell.
Note the probe (and remove) sequence is split into 2 parts:
1. The arizona_jack_codec_dev_probe() function inits a bunch of
jack-detect specific variables in struct arizona_priv and tries to get
a number of resources where getting them may fail with -EPROBE_DEFER.
2. Then once the machine driver has create a snd_sock_jack through
snd_soc_card_jack_new() it calls snd_soc_component_set_jack() on
the codec component, which will call the new arizona_jack_set_jack(),
which sets up jack-detection and requests the IRQs.
This split is necessary, because the IRQ handlers need access to the
arizona->dapm pointer and the snd_sock_jack which are not available
when the codec-driver's probe function runs.
Note this requires that machine-drivers for codecs which are converted
to use the new helper functions from arizona-jack.c are modified to
create a snd_soc_jack through snd_soc_card_jack_new() and register
this jack with the codec through snd_soc_component_set_jack().
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-10-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drivers for MFD child-devices such as the arizona codec drivers
and the arizona-extcon driver can choose to either make
runtime_pm_get/_put calls on their own child-device, which will
then be propagated to their parent; or they can make them directly
on their MFD parent-device.
The arizona-extcon code was using runtime_pm_get/_put calls on
its own child-device where as the codec drivers are using
runtime_pm_get/_put calls on their parent.
The arizona-extcon MFD cell/child-device has been removed and this
commit is part of refactoring the arizona-extcon code into a library
to be used directly from the codec drivers.
Specifically this commit moves the code over to make
runtime_pm_get/_put calls on the parent device (on arizona->dev)
bringing the code inline with how the codec drivers do this.
Note this also removes the pm_runtime_enable/_disable calls
as pm_runtime support has already been enabled on the parent-device
by the arizona MFD driver.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report
jack state through the standard sound/soc/soc-jack.c functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-9-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all the jack-detect variables from struct arizona_extcon_info to
struct arizona_priv.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report jack
state through the standard sound/soc/soc-jack.c functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-8-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with ipg_clk clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-7-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>