Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Looks like I lost that by accident, add it back.
Fixes: 076fc8775d ("wifi: cfg80211: remove wdev mutex")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Somehow, I managed to botch this and pretty much completely break
wifi. My original patch did contain these changes, but I seem to
have lost them before sending to the list. Fix it now.
Reported-and-tested-by: Kalle Valo <kvalo@kernel.org>
Fixes: 6c02fab724 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make __ieee80211_data_to_8023() return more individual drop
reasons instead of just doing RX_DROP_U_INVALID_8023.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This has many different reasons, split the return value into
the individual reasons for better traceability. Also, since
symbolic tracing doesn't work for these, add a few comments
for the numbering.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Convert all instances of RX_DROP_UNUSABLE to indicate a
better reason, and then remove RX_DROP_UNUSABLE.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we just check "result & RX_DROP_UNUSABLE", this really only works
by accident, because SKB_DROP_REASON_SUBSYS_MAC80211_UNUSABLE got to
have the value 1, and SKB_DROP_REASON_SUBSYS_MAC80211_MONITOR is 2.
Fix this to really check the entire subsys mask for the value, so it
doesn't matter what the subsystem value is.
Fixes: 7f4e09700b ("wifi: mac80211: report all unusable beacon frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When associating to an MLD AP, links may be disabled. Create all
resources associated with a disabled link so that we can later enable it
without having to create these resources on the fly.
Fixes: 6d543b34db ("wifi: mac80211: Support disabled links during association")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20230925173028.f9afdb26f6c7.I4e6e199aaefc1bf017362d64f3869645fa6830b5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Lower layer device driver stop/wake TX by calling ieee80211_stop_queue()/
ieee80211_wake_queue() while hw scan. Sometimes hw scan and PTK rekey are
running in parallel, when M4 sent from wpa_supplicant arrive while the TX
queue is stopped, then the M4 will pending send, and then new key install
from wpa_supplicant. After TX queue wake up by lower layer device driver,
the M4 will be dropped by below call stack.
When key install started, the current key flag is set KEY_FLAG_TAINTED in
ieee80211_pairwise_rekey(), and then mac80211 wait key install complete by
lower layer device driver. Meanwhile ieee80211_tx_h_select_key() will return
TX_DROP for the M4 in step 12 below, and then ieee80211_free_txskb() called
by ieee80211_tx_dequeue(), so the M4 will not send and free, then the rekey
process failed becaue AP not receive M4. Please see details in steps below.
There are a interval between KEY_FLAG_TAINTED set for current key flag and
install key complete by lower layer device driver, the KEY_FLAG_TAINTED is
set in this interval, all packet including M4 will be dropped in this
interval, the interval is step 8~13 as below.
issue steps:
TX thread install key thread
1. stop_queue -idle-
2. sending M4 -idle-
3. M4 pending -idle-
4. -idle- starting install key from wpa_supplicant
5. -idle- =>ieee80211_key_replace()
6. -idle- =>ieee80211_pairwise_rekey() and set
currently key->flags |= KEY_FLAG_TAINTED
7. -idle- =>ieee80211_key_enable_hw_accel()
8. -idle- =>drv_set_key() and waiting key install
complete from lower layer device driver
9. wake_queue -waiting state-
10. re-sending M4 -waiting state-
11. =>ieee80211_tx_h_select_key() -waiting state-
12. drop M4 by KEY_FLAG_TAINTED -waiting state-
13. -idle- install key complete with success/fail
success: clear flag KEY_FLAG_TAINTED
fail: start disconnect
Hence add check in step 11 above to allow the EAPOL send out in the
interval. If lower layer device driver use the old key/cipher to encrypt
the M4, then AP received/decrypt M4 correctly, after M4 send out, lower
layer device driver install the new key/cipher to hardware and return
success.
If lower layer device driver use new key/cipher to send the M4, then AP
will/should drop the M4, then it is same result with this issue, AP will/
should kick out station as well as this issue.
issue log:
kworker/u16:4-5238 [000] 6456.108926: stop_queue: phy1 queue:0, reason:0
wpa_supplicant-961 [003] 6456.119737: rdev_tx_control_port: wiphy_name=phy1 name=wlan0 ifindex=6 dest=ARRAY[9e, 05, 31, 20, 9b, d0] proto=36488 unencrypted=0
wpa_supplicant-961 [003] 6456.119839: rdev_return_int_cookie: phy1, returned 0, cookie: 504
wpa_supplicant-961 [003] 6456.120287: rdev_add_key: phy1, netdev:wlan0(6), key_index: 0, mode: 0, pairwise: true, mac addr: 9e:05:31:20:9b:d0
wpa_supplicant-961 [003] 6456.120453: drv_set_key: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 cipher:0xfac04, flags=0x9, keyidx=0, hw_key_idx=0
kworker/u16:9-3829 [001] 6456.168240: wake_queue: phy1 queue:0, reason:0
kworker/u16:9-3829 [001] 6456.168255: drv_wake_tx_queue: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 ac:0 tid:7
kworker/u16:9-3829 [001] 6456.168305: cfg80211_control_port_tx_status: wdev(1), cookie: 504, ack: false
wpa_supplicant-961 [003] 6459.167982: drv_return_int: phy1 - -110
issue call stack:
nl80211_frame_tx_status+0x230/0x340 [cfg80211]
cfg80211_control_port_tx_status+0x1c/0x28 [cfg80211]
ieee80211_report_used_skb+0x374/0x3e8 [mac80211]
ieee80211_free_txskb+0x24/0x40 [mac80211]
ieee80211_tx_dequeue+0x644/0x954 [mac80211]
ath10k_mac_tx_push_txq+0xac/0x238 [ath10k_core]
ath10k_mac_op_wake_tx_queue+0xac/0xe0 [ath10k_core]
drv_wake_tx_queue+0x80/0x168 [mac80211]
__ieee80211_wake_txqs+0xe8/0x1c8 [mac80211]
_ieee80211_wake_txqs+0xb4/0x120 [mac80211]
ieee80211_wake_txqs+0x48/0x80 [mac80211]
tasklet_action_common+0xa8/0x254
tasklet_action+0x2c/0x38
__do_softirq+0xdc/0x384
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230801064751.25803-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reject configuring a channel for MLO if either EHT is not supported or
the BSS does not have the correct ML element. This avoids trying to do
a multi-link association with a misconfigured AP.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.80c3b8e5a344.Iaa2d466ee6280994537e1ae7ab9256a27934806f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With this cfg80211 can report the link that caused the error to
userspace which is then able to react to it by e.g. removing the link
from the association and retrying.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.275fc7f5c426.I8086c0fdbbf92537d6a8b8e80b33387fcfd5553d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support antenna control for injection by parsing the antenna
radiotap field (which may be presented multiple times) and
telling the driver about the resulting antenna bitmap. Of
course there's no guarantee the driver will actually honour
this, just like any other injection control.
If misconfigured, i.e. the injected HT/VHT MCS needs more
chains than antennas are configured, the bitmap is reset to
zero, indicating no selection.
For now this is only set up for two anntenas so we keep more
free bits, but that can be trivially extended if any driver
implements support for it that can deal with hardware with
more antennas.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.f71001aa4da9.I00ccb762a806ea62bc3d728fa3a0d29f4f285eeb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support handling of advertised TID-to-link mapping elements received
in a beacon.
These elements are used by AP MLD to disable specific links and force
all clients to stop using these links.
By default if no TID-to-link mapping is advertised, all TIDs shall be
mapped to all links.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.623c4b692ff9.Iab0a6f561d85b8ab6efe541590985a2b6e9e74aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Connection to an AP that is running a CSA flow may end up with a
failure as the AP might change its channel during the connection
flow while we do not track the channel change yet.
Avoid that by rejecting a connection to such an AP.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.e5001a762a4a.I9745c695f3403b259ad000ce94110588a836c04a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rx_chains was set only upon registration and it we rely on it for the
active chains upon SMPS configuration after association.
When we use the set_antenna() API to limit the rx_chains from 2 to 1,
this caused issues with iwlwifi since we still had 2 active_chains
requested.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230920211508.2dde4da246b2.I904223c868c77cf2ba132a3088fe6506fcbb443b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Using the full struct cfg80211_ap_settings for an update is
misleading, since most settings cannot be updated. Split the
update case off into a new struct cfg80211_ap_update.
Change-Id: I3ba4dd9280938ab41252f145227a7005edf327e4
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers should really be able to rely on the wiphy mutex
being held all the time, unless otherwise documented. For
ethtool, that wasn't quite right. Fix and clarify this in
both code and documentation.
Reported-by: syzbot+c12a771b218dcbba32e1@syzkaller.appspotmail.com
Fixes: 0e8185ce1d ("wifi: mac80211: check wiphy mutex in ops")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cisco AP module 9115 with FW 17.3 has a bug and sends a too
large maximum MPDU length in the association response
(indicating 12k) that it cannot actually process.
Work around that by taking the minimum between what's in the
association response and the BSS elements (from beacon or
probe response).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230918140607.d1966a9a532e.I090225babb7cd4d1081ee9acd40e7de7e41c15ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When returning from ieee80211_key_link(), the key needs to
have been freed or successfully installed. This was missed
in a number of error paths, fix it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: fdf7cb4185 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can get a UBSAN warning if ieee80211_get_tx_power() returns the
INT_MIN value mac80211 internally uses for "unset power level".
UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5
-2147483648 * 100 cannot be represented in type 'int'
CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE
Call Trace:
dump_stack+0x74/0x92
ubsan_epilogue+0x9/0x50
handle_overflow+0x8d/0xd0
__ubsan_handle_mul_overflow+0xe/0x10
nl80211_send_iface+0x688/0x6b0 [cfg80211]
[...]
cfg80211_register_wdev+0x78/0xb0 [cfg80211]
cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211]
[...]
ieee80211_if_add+0x60e/0x8f0 [mac80211]
ieee80211_register_hw+0xda5/0x1170 [mac80211]
In this case, simply return an error instead, to indicate
that no data is available.
Cc: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230203023636.4418-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the driver doesn't fill NL80211_STA_INFO_TX_BITRATE in sta_set_sinfo()
then as a fallback sta->deflink.tx_stats.last_rate is used. Unfortunately
there's no guarantee that this has actually been set before it's used.
Originally found when 'iw <dev> link' would always return a tx rate of
6Mbps regardless of actual link speed for the QCA9337 running firmware
WLAN.TF.2.1-00021-QCARMSWP-1 in my netbook.
Use the sanity check logic from ieee80211_fill_rx_status() and refactor
that to use the new inline function.
Signed-off-by: Stephen Douthit <stephen.douthit@gmail.com>
Link: https://lore.kernel.org/r/20230213204024.3377-1-stephen.douthit@gmail.com
[change to bool ..._rate_valid() instead of int ..._rate_invalid()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Process FILS discovery and unsolicited broadcast probe response
transmission configurations in ieee80211_change_beacon().
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-6-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Modify the prototype for change_beacon() in struct cfg80211_op to
accept cfg80211_ap_settings instead of cfg80211_beacon_data so that
it can process data in addition to beacons.
Modify the prototypes of ieee80211_change_beacon() and driver specific
functions accordingly.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-4-quic_alokad@quicinc.com
[while at it, remove pointless "if (info)" check in tracing that just
makes all the lines longer than they need be - it's never NULL]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
FILS discovery configuration gets updated only if the maximum interval
is set to a non-zero value, hence there is no way to reset this value
to 0 once set. Replace the check for interval with a new flag which is
set only if the configuration should be updated.
Add similar changes for the unsolicited broadcast probe response handling.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-3-quic_alokad@quicinc.com
[move NULL'ing to else branch to not have intermediate NULL visible]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We really cannot even get into this as we can't have
a BSS with a 5/10 MHz (scan) width, and therefore all
the code handling shifted rates cannot happen. Remove
it all, since it's broken anyway, at least with MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There really isn't any support for scanning at different
channel widths than 20 MHz since there's no way to set it.
Remove this support for now, if somebody wants to maintain
this whole thing later we can revisit how it should work.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the changed field size was increased to u64, mesh_bss_info_changed
pulls invalid bits from the first 3 bytes of the mesh id, clears them, and
passes them on to ieee80211_link_info_change_notify, because
ifmsh->mbss_changed was not updated to match its size.
Fix this by turning into ifmsh->mbss_changed into an unsigned long array with
64 bit size.
Fixes: 15ddba5f43 ("wifi: mac80211: consistently use u64 for BSS changes")
Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230913050134.53536-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When user space transmits a management frame it is expected to use
the MLD addresses if the connection is an MLD one. Thus, in case
the management Tx is using the MLD address and no channel is configured
off-channel should not be used (as one of the active links would be used).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.73c8efce252f.Ie4b0a842debb24ef25c5e6cb2ad69b9f46bc4b2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code that sets up the assoc link will currently take the BSS
element data from the beacon only. This is correct for some of
the data, notably the timing and the "have_beacon", but all the
data about MBSSID and EHT really doesn't need to be taken from
there, and if the EHT puncturing is misconfigured on the AP but
we didn't receive a beacon yet, this causes us to connect but
immediately disconnect upon receiving the first beacon, rather
than connecting without EHT in the first place.
Change the code to take MBSSID and EHT data also from the probe
response, for a better picture of what the BSS capabilities are
and to avoid that EHT puncturing problem.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.3c7e52d49482.Iba6b672f6dc74b45bba26bc497e953e27da43ef9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During my refactoring I wanted to get rid of the switch,
but replaced it with the wrong calculation. Fix that.
Fixes: 175ad2ec89 ("wifi: mac80211: limit A-MSDU subframes for client too")
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.51bf1b8b0adb.Iffbd337fdad2b86ae12f5a39c69fb82b517f7486@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The sta info needs to be inserted before its links may be modified.
Add a few warnings to prevent accidental usage of these functions.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.eeb43b3cc9e3.I5fd8236f70e64bf6268f33c883f7a878d963b83e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows to finalize the CSA per link.
In case the switch didn't work, tear down the MLD connection.
Also pass the ieee80211_bss_conf to post_channel_switch to let the
driver know which link completed the switch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connect to MLO AP with more than one link, and the assoc response of
AP is not success, then cfg80211_unhold_bss() is not called for all the
links' cfg80211_bss except the primary link which means the link used by
the latest successful association request. Thus the hold value of the
cfg80211_bss is not reset to 0 after the assoc fail, and then the
__cfg80211_unlink_bss() will not be called for the cfg80211_bss by
__cfg80211_bss_expire().
Then the AP always looks exist even the AP is shutdown or reconfigured
to another type, then it will lead error while connecting it again.
The detail info are as below.
When connect with muti-links AP, cfg80211_hold_bss() is called by
cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When
assoc response from AP is not success(such as status_code==1), the
ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL
because ieee80211_assoc_success()->ieee80211_vif_update_links() is
not called for the links.
Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and
struct cfg80211_connect_resp_params cr in __cfg80211_connect_result()
will only have the data of the primary link, and finally function
cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss()
for the primary link. Then cfg80211_bss of the other links will never free
because its hold is always > 0 now.
Hence assign value for the bss and status from assoc_data since it is
valid for this case. Also assign value of addr from assoc_data when the
link is NULL because the addrs of assoc_data and link both represent the
local link addr and they are same value for success connection.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mesh_fast_tx_flush_addr() we already hold the lock, so
don't need additional hashtable RCU protection. Use the
rhashtable_lookup_fast() variant to avoid RCU protection
warnings.
Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There were are a number of cases in mac80211 and iwlwifi (at
least) that used the sband->iftype_data pointer directly,
instead of using the accessors to find the right array entry
to use.
Make sparse warn when such a thing is done.
To not have a lot of casts, add two helper functions/macros
- ieee80211_set_sband_iftype_data()
- for_each_sband_iftype_data()
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As previously reported by Alexander, whose commit 69403bad97
("wifi: mac80211: sdata can be NULL during AMPDU start") I'm
reverting as part of this commit, there's a race between station
destruction and aggregation setup, where the aggregation setup
can happen while the station is being removed and queue the work
after ieee80211_sta_tear_down_BA_sessions() has already run in
__sta_info_destroy_part1(), and thus the worker will run with a
now freed station. In his case, this manifested in a NULL sdata
pointer, but really there's no guarantee whatsoever.
The real issue seems to be that it's possible at all to have a
situation where this occurs - we want to stop the BA sessions
when doing _part1, but we cannot be sure, and WLAN_STA_BLOCK_BA
isn't necessarily effective since we don't know that the setup
isn't concurrently running and already got past the check.
Simply call ieee80211_sta_tear_down_BA_sessions() again in the
second part of station destruction, since at that point really
nothing else can hold a reference to the station any more.
Also revert the sdata checks since those are just misleading at
this point.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We currently call ieee80211_txq_teardown_flows() as part
of ieee80211_remove_interfaces(), but that's not really
right in case of HW registration failures, specifically
rate control. Call it separately to fix that issue.
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
