I no longer work for Plantronics (aka Poly, aka HP) and do not have
access to the headsets in order to test. However, as noted by Maxim,
the other 32xx models that share the same base code set as the 3220
would need the same quirk. This patch adds the PIDs for the rest of
the Blackwire 32XX product family that require the quirk.
Plantronics Blackwire 3210 Series (047f:c055)
Plantronics Blackwire 3215 Series (047f:c057)
Plantronics Blackwire 3225 Series (047f:c058)
Quote from previous patch by Maxim Mikityanskiy
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
End quote
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status is reported for the HP Envy x360 eu0009nv stylus even
though it does not have battery.
Prevent it from always reporting the battery as low (1%).
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/823
Reported-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Tested-by: Ioannis Iliopoulos <jxftw2424@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some additional USB mouse devices are needing ALWAYS_POLL quirk without
which they disconnect and reconnect every 60s.
Add below devices to the known quirk list.
CHERRY VID 0x046a, PID 0x000c
MICROSOFT VID 0x045e, PID 0x0783
PRIMAX VID 0x0461, PID 0x4e2a
Signed-off-by: Ankit Patel <anpatel@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Acer Aspire Switch V 10 (SW5-017)'s keyboard-dock uses the same
ITE controller setup as other Acer Switch 2-in-1's.
This needs special handling for the wifi on/off toggle hotkey as well as
to properly report touchpad on/off keypresses.
Add the USB-ids for the SW5-017's keyboard-dock with a quirk setting of
QUIRK_TOUCHPAD_ON_OFF_REPORT to fix both issues.
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The MadCatz variant of the MMO7 mouse has the ID 0738:1713 and the same
quirks as the Saitek variant.
Signed-off-by: Samuel Bailey <samuel.bailey1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Provide initial support for the DualSense Edge controller. The brings
support up to the level of the original DualSense, but won't yet provide
support for new features (e.g. reprogrammable buttons).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
CC: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221010212313.78275-3-roderick.colenbrander@sony.com
The Topre REALFORCE R2 firmware incorrectly reports that interface
descriptor number 1, input report descriptor 2's events are array events
rather than variable events. That particular report descriptor is used
to report keypresses when there are more than 6 keys held at a time.
This bug prevents events from this interface from being registered
properly, so only 6 keypresses (from a different interface) can be
registered at once, rather than full n-key rollover.
This commit fixes the bug by setting the correct value in a report_fixup
function.
The original bug report can be found here:
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/804
Thanks to Benjamin Tissoires for diagnosing the issue with the report
descriptor.
Signed-off-by: Harry Stern <harry@harrystern.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220911003614.297613-1-harry@harrystern.net
The touchbar on Apple T2 Macs has 2 modes, one that shows the function
keys and other that shows the media controls. The user can use the fn
key on his keyboard to switch between the 2 modes.
On Linux, if people were using an external keyboard or mouse, the
touchbar failed to change modes on pressing the fn key with the following
in dmesg :-
[ 10.661445] apple-ib-als 0003:05AC:8262.0001: : USB HID v1.01 Device [Apple Inc. Ambient Light Sensor] on usb-bce-vhci-3/input0
[ 11.830992] apple-ib-touchbar 0003:05AC:8302.0007: input: USB HID v1.01 Keyboard [Apple Inc. Touch Bar Display] on usb-bce-vhci-6/input0
[ 12.139407] apple-ib-touchbar 0003:05AC:8102.0008: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input0
[ 12.211824] apple-ib-touchbar 0003:05AC:8102.0009: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input1
[ 14.219759] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 24.395670] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 34.635791] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 269.579233] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 1 (-110)
Add the USB IDs of the touchbar found in T2 Macs to HID have special
driver list to fix the issue.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Similar to the Surface Go devices, the Elantech touchscreen/digitizer in
the Lenovo Yoga C630 mistakenly reports the battery of the stylus, and
always reports an empty battery.
Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and
prevent the erroneous low battery warnings.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Parblo A610 PRO is a UGEE v2 device with a frame with 9 buttons
and a bitmap dial. Its pen has 2 buttons, supports tilt and pressure.
Add its ID in order to support the device.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The XP-PEN Deco Pro S is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse. Its pen has 2 buttons, supports tilt and
pressure.
All the pieces to support it are already in place. Add its ID in order
to support the device.
The required Wireshark traces were captured by Jouke Witteveen.
For more information check [1].
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/738 [1]
Tested-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The XP-PEN Deco L (UGEE) needs to be initialized by sending a buffer of
magic data, discovered by sniffing the Windows driver traffic.
In order to differentiate UGEE tablets that need this kind of
initialization from the previous ones, name them v2 internally and
create an entry point for them.
After initialization, the template report descriptors can be discovered
by parsing a string descriptor, similar to the one exposed by HUION v1
devices.
Add all the required elements to support the device.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Similar to the Surface Go (1), the (Elantech) touchscreen/digitizer in
the Surface Go 2 mistakenly reports the battery of the stylus. Instead
of over the touchscreen device, battery information is provided via
bluetooth and the touchscreen device reports an empty battery.
Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and
prevent the erroneous low battery warnings.
Cc: stable@vger.kernel.org
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Similar to other UGEE pens, but the IDs were missing.
Signed-off-by: Roman Romanenko <romu4444@gmail.com>
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for one of the several Mega World USB game
controller with integrated force feedback. It is a HID based
memory-less game controller, with a weak motor on the left, and a
strong one on the right.
Signed-off-by: frank zago <frank@zago.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This keyboard has two modes: regular HID and a native mode, which is used
in Windows driver. Native mode disables (poor) middle mouse button
scrolling emulation and reports middle button and scrolling events with a
custom report ID, which could be better handled in the driver.
This commit adds functional button mapping and native scrolling support.
HID collection in Bluetooth mode for custom report ID=5 is broken and
is patched upon connection. The collection initially contains incorrect
Usage Minimum/Usage Maximum numbers and, more importantly, marks Input
as Variable, not Array, while reporting values as in Array.
The keyboard is very similar to Compact USB/Bluetooth Keyboard with
TrackPoint, that's why this patch reuses all of cptkbd functions, except
for input mapping.
Signed-off-by: Florian Klink <flokli@flokli.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a driver to enable the macro keys (M1 - M5) by default, these are
mapped to XF86Tools and XF86Launch5 - XF86Launch8. The driver remaps
them by default to macro keys with an option to retain the old mapping
which users most likely already use as there are many scripts to enable
the macro keys available on Github and other websites.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds the necessary IDs and configuration for Macs with
the T2 Security chip.
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since the 006d Huion PID is used by multiple tablets (at least HS64 and
HS610), rename its constant to a more general
"USB_DEVICE_ID_HUION_TABLET2".
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the UGTABLET WP5540 digitizer tablet
devices. Without it, the pen moves the cursor, but neither the
buttons nor the tap sensor in the tip do work.
Signed-off-by: Sergio Costas <rastersoft@gmail.com>
Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fix for SiGma Micro-based keyboards where all the modifier keys mapped
to Shift_L.
Co-developed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Desmond Lim <peckishrine@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status on Elan tablet driver is reported for the HP ENVY x360
15t-dr100. There is no separate battery for the Elan controller resulting in a
battery level report of 0% or 1% depending on whether a stylus has interacted
with the screen. These low battery level reports causes a variety of bad
behavior in desktop environments. This patch adds the appropriate quirk to
indicate that the batery status is unused for this target.
Cc: stable@vger.kernel.org
Signed-off-by: Karl Kurbjun <kkurbjun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new driver for the LetSketch / VSON WP9620N drawing tablet. This
drawing tablet is also sold under other brand names such as Case U,
presumably this driver will work for all of them. But it has only been
tested with a LetSketch WP9620N model.
These tablets also work without a special HID driver, but then only
part of the active area works and both the pad and stylus buttons are
hardwired to special key-combos. E.g. the 2 stylus buttons send right
mouse clicks / resp. "e" key presses.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2005575
BugLink: https://github.com/DIGImend/digimend-kernel-drivers/issues/528
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status is reported for the Asus UX550VE touchscreen even though
it does not have a battery. Prevent it from always reporting the
battery as low.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the
Microsoft Surface 3 (non pro) type-cover.
Trying to init the reports seems to confuse the type-cover and
causes 2 issues:
1. Despite hid-multitouch sending the command to switch the
touchpad to multitouch mode, it keeps sending events on the
mouse emulation interface.
2. The touchpad completely stops sending events after a reboot.
Adding the HID_QUIRK_NO_INIT_REPORTS quirk fixes both issues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status is reported for the HP Envy X360 Convertible 15-eu0xxx
even if it does not have a battery. Prevent it from always reporting the
battery as low.
Signed-off-by: Trevor Davenport <trevor.davenport@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
NitroKey produced a clone of U2F Zero with a different firmware,
which moved extra commands into the vendor range.
Disambiguate hardware revisions and select the correct configuration in
u2fzero_probe.
Link: https://github.com/Nitrokey/nitrokey-fido-u2f-firmware/commit/a93c16b41f
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the joy-con charging grip. The peripheral
essentially behaves the same as a pro controller, but with two joy-cons
attached to the grip. However the grip exposes the two joy-cons as
separate hid devices, so extra handling is required. The joy-con is
queried to check if it is a right or left joy-con (since the product ID
is identical between left/right when using the grip).
Since controller model detection is now more complicated, the various
checks for hid product values have been replaced with helper macros to
reduce code duplication.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid-nintendo driver supports the Nintendo Switch Pro Controllers and
the Joy-Cons. The Pro Controllers can be used over USB or Bluetooth.
The Joy-Cons each create their own, independent input devices, so it is
up to userspace to combine them if desired.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
