mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2025-01-09 15:24:32 +08:00
267501ec2b
191 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Thomas Zimmermann
|
bfba94162b |
drm/nouveau: Remove invalid reference to struct drm_device.pdev
The pdev field got removed from struct drm_device recently. Replace
the invalid reference with an upcast from the struct's dev field.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
|
||
Lyude Paul
|
6cba3fe433 |
drm/dp: Add backpointer to drm_device in drm_dp_aux
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so. Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux. v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com> |
||
|
Lyude Paul
|
fd43ad9d47 |
drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister
Since AUX adapters on nouveau have their respective DRM connectors as parents, we need to make sure that we register then after their connectors. Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-3-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com> |
||
Karol Herbst
|
d1f5a3fc85 |
drm/nouveau/kms: handle mDP connectors
In some cases we have the handle those explicitly as the fallback connector type detection fails and marks those as eDP connectors. Attempting to use such a connector with mutter leads to a crash of mutter as it ends up with two eDP displays. Information is taken from the official DCB documentation. Cc: stable@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Ben Skeggs <bskeggs@redhat.com> Reported-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Thomas Zimmermann
|
4c0d42f7ba |
drm/nouveau: Remove references to struct drm_device.pdev
Using struct drm_device.pdev is deprecated. Convert nouveau to struct drm_device.dev. No functional changes. v3: * fix nv04_dfp_update_backlight() as well (Jeremy) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jeremy Cline <jcline@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210107080748.4768-8-tzimmermann@suse.de |
||
Alexander Kapshuk
|
630f512280 |
drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth
This oops manifests itself on the following hardware: 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 103M] (rev a1) Oct 09 14:17:46 lp-sasha kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: #PF: supervisor read access in kernel mode Oct 09 14:17:46 lp-sasha kernel: #PF: error_code(0x0000) - not-present page Oct 09 14:17:46 lp-sasha kernel: PGD 0 P4D 0 Oct 09 14:17:46 lp-sasha kernel: Oops: 0000 [#1] SMP PTI Oct 09 14:17:46 lp-sasha kernel: CPU: 1 PID: 191 Comm: systemd-udevd Not tainted 5.9.0-rc8-next-20201009 #38 Oct 09 14:17:46 lp-sasha kernel: Hardware name: Hewlett-Packard Compaq Presario CQ61 Notebook PC/306A, BIOS F.03 03/23/2009 Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297 Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000 Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000 Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003 Oct 09 14:17:46 lp-sasha kernel: FS: 00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000 Oct 09 14:17:46 lp-sasha kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0 Oct 09 14:17:46 lp-sasha kernel: Call Trace: Oct 09 14:17:46 lp-sasha kernel: nouveau_connector_get_modes+0x1e6/0x240 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? kfree+0xb9/0x240 Oct 09 14:17:46 lp-sasha kernel: ? drm_connector_list_iter_next+0x7c/0xa0 Oct 09 14:17:46 lp-sasha kernel: drm_helper_probe_single_connector_modes+0x1ba/0x7c0 Oct 09 14:17:46 lp-sasha kernel: drm_client_modeset_probe+0x27e/0x1360 Oct 09 14:17:46 lp-sasha kernel: ? nvif_object_sclass_put+0xc/0x20 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? nouveau_cli_init+0x3cc/0x440 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? ktime_get_mono_fast_ns+0x49/0xa0 Oct 09 14:17:46 lp-sasha kernel: ? nouveau_drm_open+0x4e/0x180 [nouveau] Oct 09 14:17:46 lp-sasha kernel: __drm_fb_helper_initial_config_and_unlock+0x3f/0x4a0 Oct 09 14:17:46 lp-sasha kernel: ? drm_file_alloc+0x18f/0x260 Oct 09 14:17:46 lp-sasha kernel: ? mutex_lock+0x9/0x40 Oct 09 14:17:46 lp-sasha kernel: ? drm_client_init+0x110/0x160 Oct 09 14:17:46 lp-sasha kernel: nouveau_fbcon_init+0x14d/0x1c0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: nouveau_drm_device_init+0x1c0/0x880 [nouveau] Oct 09 14:17:46 lp-sasha kernel: nouveau_drm_probe+0x11a/0x1e0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: pci_device_probe+0xcd/0x140 Oct 09 14:17:46 lp-sasha kernel: really_probe+0xd8/0x400 Oct 09 14:17:46 lp-sasha kernel: driver_probe_device+0x4a/0xa0 Oct 09 14:17:46 lp-sasha kernel: device_driver_attach+0x9c/0xc0 Oct 09 14:17:46 lp-sasha kernel: __driver_attach+0x6f/0x100 Oct 09 14:17:46 lp-sasha kernel: ? device_driver_attach+0xc0/0xc0 Oct 09 14:17:46 lp-sasha kernel: bus_for_each_dev+0x75/0xc0 Oct 09 14:17:46 lp-sasha kernel: bus_add_driver+0x106/0x1c0 Oct 09 14:17:46 lp-sasha kernel: driver_register+0x86/0xe0 Oct 09 14:17:46 lp-sasha kernel: ? 0xffffffffa044e000 Oct 09 14:17:46 lp-sasha kernel: do_one_initcall+0x48/0x1e0 Oct 09 14:17:46 lp-sasha kernel: ? _cond_resched+0x11/0x60 Oct 09 14:17:46 lp-sasha kernel: ? kmem_cache_alloc_trace+0x19c/0x1e0 Oct 09 14:17:46 lp-sasha kernel: do_init_module+0x57/0x220 Oct 09 14:17:46 lp-sasha kernel: __do_sys_finit_module+0xa0/0xe0 Oct 09 14:17:46 lp-sasha kernel: do_syscall_64+0x33/0x40 Oct 09 14:17:46 lp-sasha kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Oct 09 14:17:46 lp-sasha kernel: RIP: 0033:0x7fd01a060d5d Oct 09 14:17:46 lp-sasha kernel: Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 70 0c 00 f7 d8 64 89 01 48 Oct 09 14:17:46 lp-sasha kernel: RSP: 002b:00007ffc8ad38a98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 Oct 09 14:17:46 lp-sasha kernel: RAX: ffffffffffffffda RBX: 0000563f6e7fd530 RCX: 00007fd01a060d5d Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000000 RSI: 00007fd01a19f95d RDI: 000000000000000f Oct 09 14:17:46 lp-sasha kernel: RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007 Oct 09 14:17:46 lp-sasha kernel: R10: 000000000000000f R11: 0000000000000246 R12: 00007fd01a19f95d Oct 09 14:17:46 lp-sasha kernel: R13: 0000000000000000 R14: 0000563f6e7fbc10 R15: 0000563f6e7fd530 Oct 09 14:17:46 lp-sasha kernel: Modules linked in: nouveau(+) ttm xt_string xt_mark xt_LOG vgem v4l2_dv_timings uvcvideo ulpi udf ts_kmp ts_fsm ts_bm snd_aloop sil164 qat_dh895xccvf nf_nat_sip nf_nat_irc nf_nat_ftp nf_nat nf_log_ipv6 nf_log_ipv4 nf_log_common ltc2990 lcd intel_qat input_leds i2c_mux gspca_main videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc drivetemp cuse fuse crc_itu_t coretemp ch7006 ath5k ath algif_hash Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: ---[ end trace 0ddafe218ad30017 ]--- Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297 Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000 Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000 Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003 Oct 09 14:17:46 lp-sasha kernel: FS: 00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000 Oct 09 14:17:46 lp-sasha kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0 The disassembly: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 All code ======== 0: 0a 00 or (%rax),%al 2: 00 48 8b add %cl,-0x75(%rax) 5: 49 rex.WB 6: 48 c7 87 b8 00 00 00 movq $0x6,0xb8(%rdi) d: 06 00 00 00 11: 80 b9 4d 0a 00 00 00 cmpb $0x0,0xa4d(%rcx) 18: 75 1e jne 0x38 1a: 83 fa 41 cmp $0x41,%edx 1d: 75 05 jne 0x24 1f: 48 85 c0 test %rax,%rax 22: 75 29 jne 0x4d 24: 8b 81 10 0d 00 00 mov 0xd10(%rcx),%eax 2a:* 39 06 cmp %eax,(%rsi) <-- trapping instruction 2c: 7c 25 jl 0x53 2e: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) 35: 75 b7 jne 0xffffffffffffffee 37: c3 retq 38: 80 b9 0c 0d 00 00 00 cmpb $0x0,0xd0c(%rcx) 3f: 75 .byte 0x75 Code starting with the faulting instruction =========================================== 0: 39 06 cmp %eax,(%rsi) 2: 7c 25 jl 0x29 4: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) b: 75 b7 jne 0xffffffffffffffc4 d: c3 retq e: 80 b9 0c 0d 00 00 00 cmpb $0x0,0xd0c(%rcx) 15: 75 .byte 0x75 objdump -SF --disassemble=nouveau_connector_detect_depth [...] if (nv_connector->edid && c85e1: 83 fa 41 cmp $0x41,%edx c85e4: 75 05 jne c85eb <nouveau_connector_detect_depth+0x6b> (File Offset: 0xc866b) c85e6: 48 85 c0 test %rax,%rax c85e9: 75 29 jne c8614 <nouveau_connector_detect_depth+0x94> (File Offset: 0xc8694) nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) duallink = ((u8 *)nv_connector->edid)[121] == 2; else duallink = mode->clock >= bios->fp.duallink_transition_clk; if ((!duallink && (bios->fp.strapless_is_24bit & 1)) || c85eb: 8b 81 10 0d 00 00 mov 0xd10(%rcx),%eax c85f1: 39 06 cmp %eax,(%rsi) c85f3: 7c 25 jl c861a <nouveau_connector_detect_depth+0x9a> (File Offset: 0xc869a) ( duallink && (bios->fp.strapless_is_24bit & 2))) c85f5: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) c85fc: 75 b7 jne c85b5 <nouveau_connector_detect_depth+0x35> (File Offset: 0xc8635) connector->display_info.bpc = 8; [...] % scripts/faddr2line /lib/modules/5.9.0-rc8-next-20201009/kernel/drivers/gpu/drm/nouveau/nouveau.ko nouveau_connector_detect_depth+0x71/0xc0 nouveau_connector_detect_depth+0x71/0xc0: nouveau_connector_detect_depth at /home/sasha/linux-next/drivers/gpu/drm/nouveau/nouveau_connector.c:891 It is actually line 889. See the disassembly below. 889 duallink = mode->clock >= bios->fp.duallink_transition_clk; The NULL pointer being dereferenced is mode. Git bisect has identified the following commit as bad: |
||
|
Lyude Paul
|
2d831155cf |
drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()
Ville also pointed out that I got a lot of the logic here wrong as well, whoops.
While I don't think anyone's likely using 3D output with nouveau, the next patch
will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get
rid of it and open-code it like before, while taking care to move the 3D frame
packing calculations on the dot clock into the right place.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
|
||
|
Lyude Paul
|
f28e32d390 |
drm/nouveau/kms: Don't change EDID when it hasn't actually changed
Currently in nouveau_connector_ddc_detect() and
nouveau_connector_detect_lvds(), we start the connector probing process
by releasing the previous EDID and informing DRM of the change. However,
since commit
|
||
|
Lyude Paul
|
d297ce4b5d |
drm/nouveau/kms: Only use hpd_work for reprobing in HPD paths
Currently we perform both short IRQ handling for DP, and connector reprobing in the HPD IRQ handler. However since we need to grab connection_mutex in order to reprobe a connector, in theory we could accidentally block ourselves from handling any short IRQs until after a modeset completes if a connector hotplug happens to occur in parallel with a modeset. I haven't seen this actually happen yet, but since we're cleaning up nouveau's hotplug handling code anyway and we already have a hpd worker, we can simply fix this by only relying on the HPD worker to actually reprobe connectors when we receive a HPD IRQ. We also add a mask to nouveau_drm to keep track of which connectors are waiting to be reprobed in response to an HPD IRQ. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-13-lyude@redhat.com |
||
|
Lyude Paul
|
02bb7fe2d3 |
drm/nouveau/kms: Move drm_dp_cec_unset_edid() into nouveau_connector_detect()
For whatever reason we currently unset the EDID for DP CEC support when responding to the connector being unplugged, instead of just doing it in nouveau_connector_detect() where we set the CEC EDID. This isn't really needed and could even potentially cause us to forget to unset the EDID if the connector is removed without a corresponding hpd event, so let's fix that. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-12-lyude@redhat.com |
||
|
Lyude Paul
|
a0922278f8 |
drm/nouveau/kms/nv50-: Refactor and cleanup DP HPD handling
First some backstory here: Currently, we keep track of whether or not we've enabled MST or not by trying to piggy-back off the MST helpers. This means that in order to check whether MST is enabled or not, we actually need to grab drm_dp_mst_topology_mgr.lock. Back when I originally wrote this, I did this piggy-backing with the intention that I'd eventually be teaching our MST helpers how to recover when an MST device has stopped responding, which in turn would require the MST helpers having a way of disabling MST independently of the driver. Note that this was before I reworked locking in the MST helpers, so at the time we were sticking random things under &mgr->lock - which grabbing this lock was meant to protect against. This never came to fruition because doing such a reset safely turned out to be a lot more painful and impossible then it sounds, and also just risks us working around issues with our MST handlers that should be properly fixed instead. Even if it did though, simply calling drm_dp_mst_topology_mgr_set_mst() from the MST helpers (with the exception of when we're tearing down our MST managers, that's always OK) wouldn't have been a bad idea, since drivers like nouveau and i915 need to do their own book keeping immediately after disabling MST. So-implementing that would likely require adding a hook for helper-triggered MST disables anyway. So, fast forward to now - we want to start adding support for all of the miscellaneous bits of the DP protocol (for both SST and MST) we're missing before moving on to supporting more complicated features like supporting different BPP values on MST, DSC, etc. Since many of these features only exist on SST and make use of DP HPD IRQs, we want to be able to atomically check whether we're servicing an MST IRQ or SST IRQ in nouveau_connector_hotplug(). Currently we literally don't do this at all, and just handle any kind of possible DP IRQ we could get including ESIs - even if MST isn't actually enabled. This would be very complicated and difficult to fix if we need to hold &mgr->lock while handling SST IRQs to ensure that the MST topology state doesn't change under us. What we really want here is to do our own tracking of whether MST is enabled or not, similar to drivers like i915, and define our own locking order to decomplicate things and avoid hitting locking issues in the future. So, let's do this by refactoring our MST probing/enabling code to use our own MST bookkeeping, along with adding a lock for protecting DP state that needs to be checked outside of our connector probing functions. While we're at it, we also remove a bunch of unneeded steps we perform when probing/enabling MST: * Enabling bits in MSTM_CTRL before calling drm_dp_mst_topology_mgr_set_mst(). I don't think these ever actually did anything, since the nvif methods for enabling MST don't actually do anything DPCD related and merely indicate to nvkm that we've turned on MST. * Checking the MSTM_CTRL bit is intact when checking the state of an enabled MST topology in nv50_mstm_detect(). I just added this to be safe originally, but now that we try reading the DPCD when probing DP connectors it shouldn't be needed as that will abort our hotplug probing if the device was removed well before we start checking for MST.. * All of the duplicate DPCD version checks. This leaves us with much nicer looking code, a much more sensible locking scheme, and an easy way of checking whether MST is enabled or not for handling DP HPD IRQs. v2: * Get rid of accidental newlines v4: * Fix uninitialized usage of mstm in nv50_mstm_detect() - thanks kernel bot! Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-9-lyude@redhat.com |
||
|
Lyude Paul
|
09838c4efe |
drm/nouveau/kms: Search for encoders' connectors properly
While the way we find the associated connector for an encoder is just fine for legacy modesetting, it's not correct for nv50+ since that uses atomic modesetting. For reference, see the drm_encoder kdocs. Fix this by removing nouveau_encoder_connector_get(), and replacing it with nv04_encoder_get_connector(), nv50_outp_get_old_connector(), and nv50_outp_get_new_connector(). v2: * Don't line-wrap for_each_(old|new)_connector_in_state in nv50_outp_get_(old|new)_connector() - sravn v3: * Fix potential uninitialized usage of nv_connector (needs to be initialized to NULL at the start). Thanks kernel test robot! v4: * Actually fix uninitialized nv_connector usage in nv50_audio_component_get_eld(). The previous fix wouldn't have worked since we would have started out with nv_connector == NULL, but wouldn't clear it after a single drm_for_each_encoder() iteration. Thanks again Kernel bot! Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-7-lyude@redhat.com |
||
|
Lyude Paul
|
6ba1193255 |
drm/nouveau/kms/nv50-: Remove open-coded drm_dp_read_desc()
Noticed this while going through our DP code - we use an open-coded version of drm_dp_read_desc() instead of just using the helper, so change that. This will also let us use quirks in the future if we end up needing them. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-3-lyude@redhat.com |
||
Ben Skeggs
|
f7a7d22ad6 |
drm/nouveau/nvif: give every notify object a human-readable name
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> |
||
Gustavo A. R. Silva
|
f6e7393ede |
drm/nouveau: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
Aditya Pakki
|
990a116298 |
drm/nouveau: Fix reference count leak in nouveau_connector_detect
nouveau_connector_detect() calls pm_runtime_get_sync and in turn increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
Dave Airlie
|
0a19b068ac |
drm-misc-next for v5.9:
UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl7s11IACgkQ/lWMcqZw E8OYnQ/+K4ZGpU11t4IzXCyJYis2ZPYs/FlJ2BWXH89YhOckN1e1tq7uDBzUE8qK Hlz0gvH5C0WXR/PWqNglPXW7INwc0LtC8PSmvS4vvrZQBaJ2bvf19y7dROqJbR0E xTUje95eq+10H9TysCRTf1osIUuZIoR0gRna22pb+nplKVBkqsQPyPT21AWq4fN0 H/LQfKNfAAHtKwvfsMsuG2U+ZTyTYo7Xi6UP413WAqDmzhewnCm5plifM29m5LhB 9BmKk0/1pL3KzZuCQvcZw4kYUjXYsgoOqD4hkMAOLsjyf6Ad5zbPB5YTxNK0C+NU N04aHWvkRVl62A6rehgXdS5GJ3M4ORPDpIV9zQCVxMZV/886JLTGA1Wb+b3+umdk t5M40kzgYQTDqdSwFoCDCd1tFpEjnLbE7E+eM89AyzTPOxZowrVS0No1dJA3+ST/ g7JOdDu2Zg7VAar6zByow0pMppikZro9H1mpSnk+WHbYNF3dFmW3QHKRuxoRt+Ee l5G52LylwH3ZMPebGH9XB4cWtAUAHOsioe3CS/PKzGeUWNlUK29AqDCCBQmUdbcT HNm5/Yygdg3rRjkDBuUI0I/pifxMYvm+28eNfNGjwq5To9ABXPNONQCEBH6rke+S d1Z2nMmiVDf2MqhpkJppTKtHdMz13IGyZykXB7CdGnAu6k5s59c= =ZmKI -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2020-06-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com |
||
Ville Syrjälä
|
0425662fdf |
drm: Nuke mode->vrefresh
Get rid of mode->vrefresh and just calculate it on demand. Saves
a bit of space and avoids the cached value getting out of sync
with reality.
Mostly done with cocci, with the following manual fixups:
- Remove the now empty loop in drm_helper_probe_single_connector_modes()
- Fix __MODE() macro in ch7006_mode.c
- Fix DRM_MODE_ARG() macro in drm_modes.h
- Remove leftover comment from samsung_s6d16d0_mode
- Drop the TODO
@@
@@
struct drm_display_mode {
...
- int vrefresh;
...
};
@@
identifier N;
expression E;
@@
struct drm_display_mode N = {
- .vrefresh = E
};
@@
identifier N;
expression E;
@@
struct drm_display_mode N[...] = {
...,
{
- .vrefresh = E
}
,...
};
@@
expression E;
@@
{
DRM_MODE(...),
- .vrefresh = E,
}
@@
identifier M, R;
@@
int drm_mode_vrefresh(const struct drm_display_mode *M)
{
...
- if (M->vrefresh > 0)
- R = M->vrefresh;
- else
if (...) {
...
}
...
}
@@
struct drm_display_mode *p;
expression E;
@@
(
- p->vrefresh = E;
|
- p->vrefresh
+ drm_mode_vrefresh(p)
)
@@
struct drm_display_mode s;
expression E;
@@
(
- s.vrefresh = E;
|
- s.vrefresh
+ drm_mode_vrefresh(&s)
)
@@
expression E;
@@
- drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E)
+ drm_mode_vrefresh(E)
@find_substruct@
identifier X;
identifier S;
@@
struct X {
...
struct drm_display_mode S;
...
};
@@
identifier find_substruct.S;
expression E;
identifier I;
@@
{
.S = {
- .vrefresh = E
}
}
@@
identifier find_substruct.S;
identifier find_substruct.X;
expression E;
identifier I;
@@
struct X I[...] = {
...,
.S = {
- .vrefresh = E
}
,...
};
v2: Drop TODO
v3: Rebase
v4: Rebase
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
|
||
|
Lyude Paul
|
d6a9efece7 |
drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
Currently, the nv50_mstc_mode_valid() function is happy to take any and all modes, even the ones we can't actually support sometimes like interlaced modes. Luckily, the only difference between the mode validation that needs to be performed for MST vs. SST is that eventually we'll need to check the minimum PBN against the MSTB's full PBN capabilities (remember-we don't care about the current bw state here). Otherwise, all of the other code can be shared. So, we move all of the common mode validation in nouveau_connector_mode_valid() into a separate helper, nv50_dp_mode_valid(), and use that from both nv50_mstc_mode_valid() and nouveau_connector_mode_valid(). Note that we allow for returning the calculated clock that nv50_dp_mode_valid() came up with, since we'll eventually want to use that for PBN calculation in nv50_mstc_mode_valid(). Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Lyude Paul
|
4a2cb4181b |
drm/nouveau/kms/nv50-: Probe SOR and PIOR caps for DP interlacing support
Right now, we make the mistake of allowing interlacing on all connectors. Nvidia hardware does not always support interlacing with DP though, so we need to make sure that we don't allow interlaced modes to be set in such situations as otherwise we'll end up accidentally hanging the display HW. This fixes some hangs with Turing, which would be caused by attempting to set an interlaced mode on hardware that doesn't support it. This patch likely fixes other hardware hanging in the same way as well. Note that we say we probe PIOR caps, but they don't actually have any interlacing caps. So, the get_caps() function for PIORs just sets interlacing support to true. Changes since v1: * Actually probe caps correctly this time, both on EVO and NVDisplay. Changes since v2: * Fix probing for < GF119 * Use vfunc table, in prep for adding more caps in the future. Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
Hans de Goede
|
64d17f25dc |
drm/nouveau: Fix drm-core using atomic code-paths on pre-nv50 hardware
We do not support atomic modesetting on pre-nv50 hardware, but until now our connector code was setting drm_connector->state on pre-nv50 hardware. This causes the core to enter atomic modesetting paths in at least: 1. drm_connector_get_encoder(), returning connector->state->best_encoder which is always 0, causing us to always report 0 as encoder_id in the drmModeConnector struct returned by drmModeGetConnector(). 2. drm_encoder_get_crtc(), returning NULL because uses_atomic get set, causing us to always report 0 as crtc_id in the drmModeEncoder struct returned by drmModeGetEncoder() Which in turn confuses userspace, at least plymouth thinks that the pipe has changed because of this and tries to reconfigure it unnecessarily. More in general we should not set drm_connector->state in the non-atomic code as this violates the drm-core's expectations. This commit fixes this by using a nouveau_conn_atom struct embedded in the nouveau_connector struct for property handling in the non-atomic case. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1706557 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Lyude Paul
|
09e530657e |
drm/nouveau: Don't grab runtime PM refs for HPD IRQs
In order for suspend/resume reprobing to work, we need to be able to perform sideband communications during suspend/resume, along with runtime PM suspend/resume. In order to do so, we also need to make sure that nouveau doesn't bother grabbing a runtime PM reference to do so, since otherwise we'll start deadlocking runtime PM again. Note that we weren't able to do this before, because of the DP MST helpers processing UP requests from topologies in the same context as drm_dp_mst_hpd_irq() which would have caused us to open ourselves up to receiving hotplug events and deadlocking with runtime suspend/resume. Now that those requests are handled asynchronously, this change should be completely safe. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-10-lyude@redhat.com |
||
Maxime Ripard
|
4092de1ba3
|
Merge drm/drm-next into drm-misc-next
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in. Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
José Roberto de Souza
|
62afb4ad42 |
drm/connector: Allow max possible encoders to attach to a connector
Currently we restrict the number of encoders that can be linked to a connector to 3, increase it to match the maximum number of encoders that can be initialized(32). To more effiently do that lets switch from an array of encoder ids to bitmask. v2: Fixing missed return on amdgpu_dm_connector_to_encoder() Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190913232857.389834-2-jose.souza@intel.com |
||
Dariusz Marcinkiewicz
|
ae85b0df12 |
drm_dp_cec: add connector info support.
Pass the connector info to the CEC adapter. This makes it possible to associate the CEC adapter with the corresponding drm connector. Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-2-darekm@google.com |
||
Sam Ravnborg
|
690ae20c04 |
drm/nouveau: drop use of drmp.h
Drop use of the deprecated drmP.h file from drm/nouveau. Build tested using allyesconfig and allmodconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
Leo Li
|
7713c0f10d |
drm/nouveau: Use connector kdev as aux device parent
Set the connector's kernel device as the parent for the aux kernel device. This allows udev rules to access connector attributes when creating symlinks to aux devices. Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-4-sunpeng.li@amd.com |
||
Yongxin Liu
|
09b90e2fe3 |
drm/nouveau: fix memory leak in nouveau_conn_reset()
In nouveau_conn_reset(), if connector->state is true,
__drm_atomic_helper_connector_destroy_state() will be called,
but the memory pointed by asyc isn't freed. Memory leak happens
in the following function __drm_atomic_helper_connector_reset(),
where newly allocated asyc->state will be assigned to connector->state.
So using nouveau_conn_atomic_destroy_state() instead of
__drm_atomic_helper_connector_destroy_state to free the "old" asyc.
Here the is the log showing memory leak.
unreferenced object 0xffff8c5480483c80 (size 192):
comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s)
hex dump (first 32 bytes):
00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00 ...{T...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0
[<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau]
[<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau]
[<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau]
[<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau]
[<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau]
[<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau]
[<000000007e961c3e>] local_pci_probe+0x47/0xa0
[<00000000da14d569>] work_for_cpu_fn+0x1a/0x30
[<0000000028da4805>] process_one_work+0x27c/0x660
[<000000001d415b04>] worker_thread+0x22b/0x3f0
[<0000000003b69f1f>] kthread+0x12f/0x150
[<00000000c94c29b7>] ret_from_fork+0x3a/0x50
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
||
|
Ben Skeggs
|
d108418478 |
drm/nouveau/kms: disallow dual-link harder if hdmi connection detected
The fallthrough cases (pre-Fermi) would accidentally allow dual-link pixel clocks even where they shouldn't be. This leads to a high resolution HDMI displays, connected via a DVI->HDMI adapter, to fail on the original NV50. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
Daniel Vetter
|
fcd70cd36b |
drm: Split out drm_probe_helper.h
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch |
||
|
Ben Skeggs
|
7919faab51 |
drm/nouveau/bios: translate USB-C connector type
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Lyude Paul
|
3c7fc252b3 |
drm/nouveau/drm/nouveau: Don't forget to label dp_aux devices
This makes debugging with DP tracing a lot harder to interpret, so name each i2c based off the name of the encoder that it's for Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
Ilia Mirkin
|
9340d77f53 |
drm/nouveau/disp: take sink support into account for exposing 594mhz
Scrambling is required for supporting any mode over 340MHz. If it's not supported, reject any modes that would require it. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Lyude Paul
|
a4e05f415e |
drm/nouveau/drm/nouveau: s/nouveau_backlight_exit/nouveau_backlight_fini/
More consistent with the rest of the codebase, no functional changes here. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Lyude Paul
|
6d757753ce |
drm/nouveau: Move backlight device into nouveau_connector
Currently module unloading is broken in nouveau due to a rather annoying race condition resulting from nouveau_backlight.c having gone a bit stale over time: [ 1960.791143] ================================================================== [ 1960.791394] BUG: KASAN: use-after-free in nouveau_backlight_exit+0x112/0x150 [nouveau] [ 1960.791460] Read of size 4 at addr ffff88075accf350 by task zsh/11185 [ 1960.791521] [ 1960.791545] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G O 4.18.0Lyude-Test+ #4 [ 1960.791580] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018 [ 1960.791628] Call Trace: [ 1960.791680] dump_stack+0xa4/0xfd [ 1960.791721] print_address_description+0x71/0x239 [ 1960.791833] ? nouveau_backlight_exit+0x112/0x150 [nouveau] [ 1960.791877] kasan_report.cold.6+0x242/0x2fe [ 1960.791919] __asan_report_load4_noabort+0x19/0x20 [ 1960.792012] nouveau_backlight_exit+0x112/0x150 [nouveau] [ 1960.792081] nouveau_display_destroy+0x76/0x150 [nouveau] [ 1960.792150] nouveau_drm_device_fini+0xb7/0x190 [nouveau] [ 1960.792265] nouveau_drm_device_remove+0x14b/0x1d0 [nouveau] [ 1960.792347] ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau] [ 1960.792378] ? trace_hardirqs_on_caller+0x38b/0x570 [ 1960.792406] ? trace_hardirqs_on+0xd/0x10 [ 1960.792472] nouveau_drm_remove+0x37/0x50 [nouveau] [ 1960.792502] pci_device_remove+0x112/0x2d0 [ 1960.792530] ? pcibios_free_irq+0x10/0x10 [ 1960.792558] ? kasan_check_write+0x14/0x20 [ 1960.792587] device_release_driver_internal+0x35c/0x650 [ 1960.792617] device_release_driver+0x12/0x20 [ 1960.792643] pci_stop_bus_device+0x172/0x1e0 [ 1960.792671] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 1960.792715] remove_store+0xcb/0xe0 [ 1960.792753] ? sriov_numvfs_store+0x2e0/0x2e0 [ 1960.792779] ? __lock_is_held+0xb5/0x140 [ 1960.792808] ? component_add+0x530/0x530 [ 1960.792834] dev_attr_store+0x3f/0x70 [ 1960.792859] ? sysfs_file_ops+0x11d/0x170 [ 1960.792885] sysfs_kf_write+0x104/0x150 [ 1960.792915] ? sysfs_file_ops+0x170/0x170 [ 1960.792940] kernfs_fop_write+0x24f/0x400 [ 1960.792978] ? __lock_acquire+0x6ea/0x47f0 [ 1960.793021] __vfs_write+0xeb/0x760 [ 1960.793048] ? kernel_read+0x130/0x130 [ 1960.793076] ? __lock_is_held+0xb5/0x140 [ 1960.793107] ? rcu_read_lock_sched_held+0xdd/0x110 [ 1960.793135] ? rcu_sync_lockdep_assert+0x78/0xb0 [ 1960.793162] ? __sb_start_write+0x183/0x220 [ 1960.793189] vfs_write+0x14d/0x4a0 [ 1960.793229] ksys_write+0xd2/0x1b0 [ 1960.793255] ? __ia32_sys_read+0xb0/0xb0 [ 1960.793298] ? fput+0x1d/0x120 [ 1960.793324] ? filp_close+0xf3/0x130 [ 1960.793349] ? entry_SYSCALL_64_after_hwframe+0x59/0xbe [ 1960.793380] __x64_sys_write+0x73/0xb0 [ 1960.793407] do_syscall_64+0xaa/0x400 [ 1960.793433] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1960.793460] RIP: 0033:0x7f59df433164 [ 1960.793486] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 1960.793541] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1960.793576] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164 [ 1960.793620] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001 [ 1960.793665] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80 [ 1960.793696] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760 [ 1960.793730] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002 [ 1960.793768] [ 1960.793790] Allocated by task 11167: [ 1960.793816] save_stack+0x43/0xd0 [ 1960.793841] kasan_kmalloc+0xc4/0xe0 [ 1960.793880] kasan_slab_alloc+0x11/0x20 [ 1960.793905] kmem_cache_alloc+0xd7/0x270 [ 1960.793944] getname_flags+0xbd/0x520 [ 1960.793969] user_path_at_empty+0x23/0x50 [ 1960.793994] do_faccessat+0x1fc/0x5d0 [ 1960.794018] __x64_sys_access+0x59/0x80 [ 1960.794043] do_syscall_64+0xaa/0x400 [ 1960.794067] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1960.794093] [ 1960.794127] Freed by task 11167: [ 1960.794152] save_stack+0x43/0xd0 [ 1960.794190] __kasan_slab_free+0x139/0x190 [ 1960.794215] kasan_slab_free+0xe/0x10 [ 1960.794239] kmem_cache_free+0xcb/0x2c0 [ 1960.794264] putname+0xad/0xe0 [ 1960.794287] filename_lookup.part.59+0x1f1/0x360 [ 1960.794313] user_path_at_empty+0x3e/0x50 [ 1960.794338] do_faccessat+0x1fc/0x5d0 [ 1960.794362] __x64_sys_access+0x59/0x80 [ 1960.794393] do_syscall_64+0xaa/0x400 [ 1960.794421] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1960.794461] [ 1960.794483] The buggy address belongs to the object at ffff88075acceac0 [ 1960.794483] which belongs to the cache names_cache of size 4096 [ 1960.794540] The buggy address is located 2192 bytes inside of [ 1960.794540] 4096-byte region [ffff88075acceac0, ffff88075accfac0) [ 1960.794581] The buggy address belongs to the page: [ 1960.794609] page:ffffea001d6b3200 count:1 mapcount:0 mapping:ffff880778e4b1c0 index:0x0 compound_mapcount: 0 [ 1960.794651] flags: 0x8000000000008100(slab|head) [ 1960.794679] raw: 8000000000008100 ffffea001d39e808 ffffea001d39ea08 ffff880778e4b1c0 [ 1960.794739] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 1960.794785] page dumped because: kasan: bad access detected [ 1960.794813] [ 1960.794834] Memory state around the buggy address: [ 1960.794861] ffff88075accf200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.794894] ffff88075accf280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.794925] >ffff88075accf300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.794956] ^ [ 1960.794985] ffff88075accf380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.795017] ffff88075accf400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.795061] ================================================================== [ 1960.795106] Disabling lock debugging due to kernel taint [ 1960.795131] ------------[ cut here ]------------ [ 1960.795148] ida_remove called for id=1802201963 which is not allocated. [ 1960.795193] WARNING: CPU: 7 PID: 11185 at lib/idr.c:521 ida_remove+0x184/0x210 [ 1960.795213] Modules linked in: nouveau(O) mxm_wmi ttm i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev vfat fat intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul iTCO_wdt psmouse wmi_bmof mei_me tpm_tis mei tpm_tis_core tpm i2c_i801 thinkpad_acpi pcc_cpufreq crc32c_intel serio_raw xhci_pci xhci_hcd wmi video i2c_dev i2c_core [ 1960.795305] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G B O 4.18.0Lyude-Test+ #4 [ 1960.795330] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018 [ 1960.795352] RIP: 0010:ida_remove+0x184/0x210 [ 1960.795370] Code: 4c 89 f7 e8 ae c8 00 00 eb 22 41 83 c4 02 4c 89 e8 41 83 fc 3f 0f 86 64 ff ff ff 44 89 fe 48 c7 c7 20 94 1e 83 e8 54 ed 81 fe <0f> 0b 48 b8 00 00 00 00 00 fc ff df 48 01 c3 c7 03 00 00 00 00 c7 [ 1960.795402] RSP: 0018:ffff88074d4df7b8 EFLAGS: 00010082 [ 1960.795421] RAX: 0000000000000000 RBX: 1ffff100e9a9befa RCX: ffffffff81479975 [ 1960.795440] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88077c1de690 [ 1960.795460] RBP: ffff88074d4df878 R08: ffffed00ef83bcd3 R09: ffffed00ef83bcd2 [ 1960.795479] R10: ffffed00ef83bcd2 R11: ffff88077c1de697 R12: 000000000000036b [ 1960.795498] R13: 0000000000000202 R14: ffffffffa0aa7fa0 R15: 000000006b6b6b6b [ 1960.795518] FS: 00007f59e0995b80(0000) GS:ffff88077c1c0000(0000) knlGS:0000000000000000 [ 1960.795553] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1960.795571] CR2: 00007f59e09a2010 CR3: 00000004a1a70005 CR4: 00000000003606e0 [ 1960.795596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1960.795629] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1960.795649] Call Trace: [ 1960.795667] ? ida_destroy+0x1d0/0x1d0 [ 1960.795686] ? kasan_check_write+0x14/0x20 [ 1960.795704] ? do_raw_spin_lock+0xc2/0x1c0 [ 1960.795724] ida_simple_remove+0x26/0x40 [ 1960.795794] nouveau_backlight_exit+0x9d/0x150 [nouveau] [ 1960.795867] nouveau_display_destroy+0x76/0x150 [nouveau] [ 1960.795930] nouveau_drm_device_fini+0xb7/0x190 [nouveau] [ 1960.795989] nouveau_drm_device_remove+0x14b/0x1d0 [nouveau] [ 1960.796047] ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau] [ 1960.796067] ? trace_hardirqs_on_caller+0x38b/0x570 [ 1960.796089] ? trace_hardirqs_on+0xd/0x10 [ 1960.796146] nouveau_drm_remove+0x37/0x50 [nouveau] [ 1960.796167] pci_device_remove+0x112/0x2d0 [ 1960.796186] ? pcibios_free_irq+0x10/0x10 [ 1960.796218] ? kasan_check_write+0x14/0x20 [ 1960.796237] device_release_driver_internal+0x35c/0x650 [ 1960.796257] device_release_driver+0x12/0x20 [ 1960.796289] pci_stop_bus_device+0x172/0x1e0 [ 1960.796308] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 1960.796328] remove_store+0xcb/0xe0 [ 1960.796345] ? sriov_numvfs_store+0x2e0/0x2e0 [ 1960.796364] ? __lock_is_held+0xb5/0x140 [ 1960.796383] ? component_add+0x530/0x530 [ 1960.796401] dev_attr_store+0x3f/0x70 [ 1960.796419] ? sysfs_file_ops+0x11d/0x170 [ 1960.796436] sysfs_kf_write+0x104/0x150 [ 1960.796454] ? sysfs_file_ops+0x170/0x170 [ 1960.796471] kernfs_fop_write+0x24f/0x400 [ 1960.796488] ? __lock_acquire+0x6ea/0x47f0 [ 1960.796520] __vfs_write+0xeb/0x760 [ 1960.796538] ? kernel_read+0x130/0x130 [ 1960.796556] ? __lock_is_held+0xb5/0x140 [ 1960.796590] ? rcu_read_lock_sched_held+0xdd/0x110 [ 1960.796608] ? rcu_sync_lockdep_assert+0x78/0xb0 [ 1960.796626] ? __sb_start_write+0x183/0x220 [ 1960.796648] vfs_write+0x14d/0x4a0 [ 1960.796666] ksys_write+0xd2/0x1b0 [ 1960.796684] ? __ia32_sys_read+0xb0/0xb0 [ 1960.796701] ? fput+0x1d/0x120 [ 1960.796732] ? filp_close+0xf3/0x130 [ 1960.796749] ? entry_SYSCALL_64_after_hwframe+0x59/0xbe [ 1960.796768] __x64_sys_write+0x73/0xb0 [ 1960.796800] do_syscall_64+0xaa/0x400 [ 1960.796818] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1960.796836] RIP: 0033:0x7f59df433164 [ 1960.796854] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 1960.796884] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1960.796906] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164 [ 1960.796926] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001 [ 1960.796946] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80 [ 1960.796966] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760 [ 1960.796985] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002 [ 1960.797008] irq event stamp: 509990 [ 1960.797026] hardirqs last enabled at (509989): [<ffffffff8119ff78>] flush_work+0x4b8/0x6d0 [ 1960.797063] hardirqs last disabled at (509990): [<ffffffff8297c395>] _raw_spin_lock_irqsave+0x25/0x60 [ 1960.797085] softirqs last enabled at (509744): [<ffffffff82c005ad>] __do_softirq+0x5ad/0x8c0 [ 1960.797121] softirqs last disabled at (509735): [<ffffffff8115aa15>] irq_exit+0x1a5/0x1e0 [ 1960.797142] ---[ end trace fb1342325f1846b8 ]--- While I haven't actually gone into the details of what's causing this to happen (maybe the kernel removes the backlight device in the device core before we get to it?), it doesn't really matter anyway because the way nouveau handles backlights has long since been deprecated. According to the documentation on the drm_connector->late_register() hook, the ->late_register() hook should be used for adding extra connector-related devices. Vice versa, the ->early_unregister() hook is meant to be used for removing those devices. So: gut nouveau_drm->bl_list and nouveau_drm->backlight, and replace them with per-connector backlight structures. Additionally, move backlight registration/teardown into the ->late_register() and ->early_unregister() hooks so that DRM can give us a chance to remove the backlight before the connector is even removed. This appears to fix the problem once and for all. Changes since v2: - Use NV_INFO_ONCE for printing GMUX information, since otherwise this will end up printing that message for as many times as we have connectors Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Dave Airlie
|
bf78296ab1 |
This is the 4.19-rc5 stable release
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAlunyjMACgkQONu9yGCS aT52HhAA0JU7E88QPZ1gSxc1ifTaIlHXhLQSvQKAXOhIvHDwj4tEKDqPhpCN/dWX /o/xaUf36gU0VzUD/1IyEiMFmJEeFKnfvN5SZYZLk8uSrd4swqaY8mSueZxNEDz4 YNK9ugI/tPztuuz7I6KrO1iVquY1WlnECxc9FH76wvHsit8Sr3PvzhR+CVrOi+8p k3cpWlhHiOzT/3K3Wv2Et+oh+U+myKtQTlJDSe3fMx5chksJpBmsV/IDEtsLNZfz 3v25fHz5a3DOYqKkGJaDrbLyPNC85249B+CiXqbXvfOAHDVkMwYqcxYUG+YZ5cpm U0OShLXm67dz8vT9cxqOSguCliPRlM9W5+EKzmVT7l8+ycds3BuEEHg1xWPrJWgG 7XO10HkhZl+VvnJCj54KaszMUOdpvdEQSUs82gAFxjPbQIx5gosN9O0H+DnirMhS 6VtzS20ZoIzjd4YVkRoLNcobHB4bZVTNXZ1Zi3C/neP9pxUjhOk0y+Vr/crC5Xph 3TykIMgiVa+CdvQ/f4LOSiCgTFhF0tLGtfDQTG7f+9+W5pMc4NKSLi8EOMlJtYEy wsCYZ7/T9ElgrEzFvlxSvDwiPUhcldNao/EGdRYvMxXtgj0Ctw8LhR/2YKkqo6LK oMoKKWkj0o7uKSHKq+dakS0FprKnBnvE2Y+XA4SO/saPGFlDAVc= =OFJh -----END PGP SIGNATURE----- BackMerge v4.19-rc5 into drm-next Sean Paul requested an -rc5 backmerge from some sun4i fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
Ben Skeggs
|
f6d52b2172 |
drm/nouveau/disp: move eDP panel power handling
We need to do this earlier to prevent aux channel timeouts in resume paths on certain systems. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Lyude Paul
|
d5986a1c4d |
drm/nouveau: Fix nouveau_connector_ddc_detect()
It looks like that when we moved over to using
drm_connector_for_each_possible_encoder() in nouveau, that one rather
important part of this function got dropped by accident:
/* Right v here */
for (i = 0; nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER; i++) {
int id = connector->encoder_ids[i];
if (id == 0)
break;
Since it's rather difficult to notice: the conditional in this loop is
actually:
nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER
Meaning that all early breaks result in nv_encoder keeping it's value,
otherwise nv_encoder = NULL. Ugh.
Since this got dropped, nouveau_connector_ddc_detect() now returns an
encoder for every single connector, regardless of whether or not it's
detected:
[ 1780.056185] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for DP-2
So: fix this to ensure we only return an encoder if we actually found
one, and clean up the rest of the function while we're at it since it's
nearly impossible to read properly.
Changes since v1:
- Don't skip ddc probing for LVDS if we can't switch DDC through
vga-switcheroo, just do the DDC probing without calling
vga_switcheroo_lock_ddc() - skeggsb
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes:
|
||
|
Lyude Paul
|
3e1a12754d |
drm/nouveau: Fix deadlocks in nouveau_connector_detect()
When we disable hotplugging on the GPU, we need to be able to synchronize with each connector's hotplug interrupt handler before the interrupt is finally disabled. This can be a problem however, since nouveau_connector_detect() currently grabs a runtime power reference when handling connector probing. This will deadlock the runtime suspend handler like so: [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds. [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.486332] kworker/0:2 D 0 61 2 0x80000000 [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau] [ 861.487737] Call Trace: [ 861.488394] __schedule+0x322/0xaf0 [ 861.489070] schedule+0x33/0x90 [ 861.489744] rpm_resume+0x19c/0x850 [ 861.490392] ? finish_wait+0x90/0x90 [ 861.491068] __pm_runtime_resume+0x4e/0x90 [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau] [ 861.492416] process_one_work+0x231/0x620 [ 861.493068] worker_thread+0x44/0x3a0 [ 861.493722] kthread+0x12b/0x150 [ 861.494342] ? wq_pool_ids_show+0x140/0x140 [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.495648] ret_from_fork+0x3a/0x50 [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds. [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.498341] kworker/6:2 D 0 320 2 0x80000080 [ 861.499045] Workqueue: pm pm_runtime_work [ 861.499739] Call Trace: [ 861.500428] __schedule+0x322/0xaf0 [ 861.501134] ? wait_for_completion+0x104/0x190 [ 861.501851] schedule+0x33/0x90 [ 861.502564] schedule_timeout+0x3a5/0x590 [ 861.503284] ? mark_held_locks+0x58/0x80 [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40 [ 861.504710] ? wait_for_completion+0x104/0x190 [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190 [ 861.506136] ? wait_for_completion+0x104/0x190 [ 861.506845] wait_for_completion+0x12c/0x190 [ 861.507555] ? wake_up_q+0x80/0x80 [ 861.508268] flush_work+0x1c9/0x280 [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau] [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau] [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau] [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau] [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau] [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180 [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.514897] __rpm_callback+0x7a/0x1d0 [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.516313] rpm_callback+0x24/0x80 [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.517741] rpm_suspend+0x142/0x6b0 [ 861.518449] pm_runtime_work+0x97/0xc0 [ 861.519144] process_one_work+0x231/0x620 [ 861.519831] worker_thread+0x44/0x3a0 [ 861.520522] kthread+0x12b/0x150 [ 861.521220] ? wq_pool_ids_show+0x140/0x140 [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.522622] ret_from_fork+0x3a/0x50 [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds. [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000 [ 861.526073] Workqueue: events nvif_notify_work [nouveau] [ 861.526751] Call Trace: [ 861.527411] __schedule+0x322/0xaf0 [ 861.528089] schedule+0x33/0x90 [ 861.528758] rpm_resume+0x19c/0x850 [ 861.529399] ? finish_wait+0x90/0x90 [ 861.530073] __pm_runtime_resume+0x4e/0x90 [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau] [ 861.531459] ? ww_mutex_lock+0x47/0x80 [ 861.532097] ? ww_mutex_lock+0x47/0x80 [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm] [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper] [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper] [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau] [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau] [ 861.536221] process_one_work+0x231/0x620 [ 861.536994] worker_thread+0x44/0x3a0 [ 861.537757] kthread+0x12b/0x150 [ 861.538463] ? wq_pool_ids_show+0x140/0x140 [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.539815] ret_from_fork+0x3a/0x50 [ 861.540521] Showing all locks held in the system: [ 861.541696] 2 locks held by kworker/0:2/61: [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543814] 1 lock held by khungtaskd/64: [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 861.545160] 3 locks held by kworker/6:2/320: [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau] [ 861.548146] 1 lock held by dmesg/983: [ 861.548889] 2 locks held by zsh/1250: [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 861.551122] 6 locks held by kworker/6:0/1329: [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.552765] #1: 00000000ddb499ad ((work_completion)(¬ify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper] [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper] [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper] [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm] [ 861.557864] ============================================= [ 861.559507] NMI backtrace for cpu 2 [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 861.561948] Call Trace: [ 861.562757] dump_stack+0x8e/0xd3 [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42 [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20 [ 861.566558] watchdog+0x316/0x580 [ 861.567355] kthread+0x12b/0x150 [ 861.568114] ? reset_hung_task_detector+0x20/0x20 [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.569598] ret_from_fork+0x3a/0x50 [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7: [ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120 [ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120 [ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120 [ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120 [ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120 [ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120 [ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120 [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks So: fix this by making it so that normal hotplug handling /only/ happens so long as the GPU is currently awake without any pending runtime PM requests. In the event that a hotplug occurs while the device is suspending or resuming, we can simply defer our response until the GPU is fully runtime resumed again. Changes since v4: - Use a new trick I came up with using pm_runtime_get() instead of the hackish junk we had before Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Lyude Paul
|
6833fb1ec1 |
drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()
It's true we can't resume the device from poll workers in nouveau_connector_detect(). We can however, prevent the autosuspend timer from elapsing immediately if it hasn't already without risking any sort of deadlock with the runtime suspend/resume operations. So do that instead of entirely avoiding grabbing a power reference. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
Hans Verkuil
|
46094b2bae |
drm/nouveau: add DisplayPort CEC-Tunneling-over-AUX support
Add DisplayPort CEC-Tunneling-over-AUX support to nouveau. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/5c0b907d-0bf2-7b80-b4b6-cbde78b03f0d@xs4all.nl |
||
|
Dave Airlie
|
3fce461827 |
BackMerge v4.18-rc7 into drm-next
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
Lyude Paul
|
37afe55b4a |
drm/nouveau: Avoid looping through fake MST connectors
When MST and atomic were introduced to nouveau, another structure that could contain a drm_connector embedded within it was introduced; struct nv50_mstc. This meant that we no longer would be able to simply loop through our connector list and assume that nouveau_connector() would return a proper pointer for each connector, since the assertion that all connectors coming from nouveau have a full nouveau_connector struct became invalid. Unfortunately, none of the actual code that looped through connectors ever got updated, which means that we've been causing invalid memory accesses for quite a while now. An example that was caught by KASAN: [ 201.038698] ================================================================== [ 201.038792] BUG: KASAN: slab-out-of-bounds in nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038797] Read of size 4 at addr ffff88076738c650 by task kworker/0:3/718 [ 201.038800] [ 201.038822] CPU: 0 PID: 718 Comm: kworker/0:3 Tainted: G O 4.18.0-rc4Lyude-Test+ #1 [ 201.038825] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 201.038882] Workqueue: events nouveau_display_hpd_work [nouveau] [ 201.038887] Call Trace: [ 201.038894] dump_stack+0xa4/0xfd [ 201.038900] print_address_description+0x71/0x239 [ 201.038929] ? nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038935] kasan_report.cold.6+0x242/0x2fe [ 201.038942] __asan_report_load4_noabort+0x19/0x20 [ 201.038970] nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038998] ? nvif_notify_put+0x1f0/0x1f0 [nouveau] [ 201.039003] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 201.039049] nouveau_display_init.cold.12+0x34/0x39 [nouveau] [ 201.039089] ? nouveau_user_framebuffer_create+0x120/0x120 [nouveau] [ 201.039133] nouveau_display_resume+0x5c0/0x810 [nouveau] [ 201.039173] ? nvkm_client_ioctl+0x20/0x20 [nouveau] [ 201.039215] nouveau_do_resume+0x19f/0x570 [nouveau] [ 201.039256] nouveau_pmops_runtime_resume+0xd8/0x2a0 [nouveau] [ 201.039264] pci_pm_runtime_resume+0x130/0x250 [ 201.039269] ? pci_restore_standard_config+0x70/0x70 [ 201.039275] __rpm_callback+0x1f2/0x5d0 [ 201.039279] ? rpm_resume+0x560/0x18a0 [ 201.039283] ? pci_restore_standard_config+0x70/0x70 [ 201.039287] ? pci_restore_standard_config+0x70/0x70 [ 201.039291] ? pci_restore_standard_config+0x70/0x70 [ 201.039296] rpm_callback+0x175/0x210 [ 201.039300] ? pci_restore_standard_config+0x70/0x70 [ 201.039305] rpm_resume+0xcc3/0x18a0 [ 201.039312] ? rpm_callback+0x210/0x210 [ 201.039317] ? __pm_runtime_resume+0x9e/0x100 [ 201.039322] ? kasan_check_write+0x14/0x20 [ 201.039326] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039333] __pm_runtime_resume+0xac/0x100 [ 201.039374] nouveau_display_hpd_work+0x67/0x1f0 [nouveau] [ 201.039380] process_one_work+0x7a0/0x14d0 [ 201.039388] ? cancel_delayed_work_sync+0x20/0x20 [ 201.039392] ? lock_acquire+0x113/0x310 [ 201.039398] ? kasan_check_write+0x14/0x20 [ 201.039402] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039409] worker_thread+0x86/0xb50 [ 201.039418] kthread+0x2e9/0x3a0 [ 201.039422] ? process_one_work+0x14d0/0x14d0 [ 201.039426] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 201.039431] ret_from_fork+0x3a/0x50 [ 201.039441] [ 201.039444] Allocated by task 79: [ 201.039449] save_stack+0x43/0xd0 [ 201.039452] kasan_kmalloc+0xc4/0xe0 [ 201.039456] kmem_cache_alloc_trace+0x10a/0x260 [ 201.039494] nv50_mstm_add_connector+0x9a/0x340 [nouveau] [ 201.039504] drm_dp_add_port+0xff5/0x1fc0 [drm_kms_helper] [ 201.039511] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper] [ 201.039518] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper] [ 201.039525] drm_dp_mst_link_probe_work+0x71/0xb0 [drm_kms_helper] [ 201.039529] process_one_work+0x7a0/0x14d0 [ 201.039533] worker_thread+0x86/0xb50 [ 201.039537] kthread+0x2e9/0x3a0 [ 201.039541] ret_from_fork+0x3a/0x50 [ 201.039543] [ 201.039546] Freed by task 0: [ 201.039549] (stack is not available) [ 201.039551] [ 201.039555] The buggy address belongs to the object at ffff88076738c1a8 which belongs to the cache kmalloc-2048 of size 2048 [ 201.039559] The buggy address is located 1192 bytes inside of 2048-byte region [ffff88076738c1a8, ffff88076738c9a8) [ 201.039563] The buggy address belongs to the page: [ 201.039567] page:ffffea001d9ce200 count:1 mapcount:0 mapping:ffff88084000d0c0 index:0x0 compound_mapcount: 0 [ 201.039573] flags: 0x8000000000008100(slab|head) [ 201.039578] raw: 8000000000008100 ffffea001da3be08 ffffea001da25a08 ffff88084000d0c0 [ 201.039582] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ 201.039585] page dumped because: kasan: bad access detected [ 201.039588] [ 201.039591] Memory state around the buggy address: [ 201.039594] ffff88076738c500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039598] ffff88076738c580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039601] >ffff88076738c600: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc [ 201.039604] ^ [ 201.039607] ffff88076738c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039611] ffff88076738c700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039613] ================================================================== Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Lyude Paul
|
22b76bbe08 |
drm/nouveau: Use drm_connector_list_iter_* for iterating connectors
Every codepath in nouveau that loops through the connector list currently does so using the old method, which is prone to race conditions from MST connectors being created and destroyed. This has been causing a multitude of problems, including memory corruption from trying to access connectors that have already been freed! Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Daniel Vetter
|
c555f02371 |
drm: drop _mode_ from update_edit_property()
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch |
||
|
Ville Syrjälä
|
ddba766dd0 |
drm/nouveau: Use drm_connector_for_each_possible_encoder()
Use drm_connector_for_each_possible_encoder() for iterating
connector->encoder_ids[]. A bit more convenient not having
to deal with the implementation details.
v2: Replace drm_for_each_connector_encoder_ids() with
drm_connector_for_each_possible_encoder() (Daniel)
v3: Initialize nv_encoder to NULL to shut up gcc/smatch
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180702152927.13351-1-ville.syrjala@linux.intel.com
|
||
Luc Van Oostenryck
|
54b202f1d8 |
drm/nouveau: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
|
Ben Skeggs
|
0d4a2c5767 |
drm/nouveau/kms: move display class instantiation to library
This function is useful outside of DRM code. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> |
||
Lukas Wunner
|
d61a5c1063 |
drm/nouveau: Fix deadlock on runtime suspend
nouveau's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in nouveau_connector_detect() which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if nouveau_connector_detect() is called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Other contexts calling nouveau_connector_detect() do require a runtime PM ref, these comprise: status_store() drm sysfs interface ->fill_modes drm callback drm_fb_helper_probe_connector_modes() drm_mode_getconnector() nouveau_connector_hotplug() nouveau_display_hpd_work() nv17_tv_set_property() Stack trace for posterity: INFO: task kworker/0:1:58 blocked for more than 120 seconds. Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x28/0x80 rpm_resume+0x107/0x6e0 __pm_runtime_resume+0x47/0x70 nouveau_connector_detect+0x7e/0x4a0 [nouveau] nouveau_connector_detect_lvds+0x132/0x180 [nouveau] drm_helper_probe_detect_ctx+0x85/0xd0 [drm_kms_helper] output_poll_execute+0x11e/0x1c0 [drm_kms_helper] process_one_work+0x184/0x380 worker_thread+0x2e/0x390 INFO: task kworker/0:2:252 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x28/0x80 schedule_timeout+0x1e3/0x370 wait_for_completion+0x123/0x190 flush_work+0x142/0x1c0 nouveau_pmops_runtime_suspend+0x7e/0xd0 [nouveau] pci_pm_runtime_suspend+0x5c/0x180 vga_switcheroo_runtime_suspend+0x1e/0xa0 __rpm_callback+0xc1/0x200 rpm_callback+0x1f/0x70 rpm_suspend+0x13c/0x640 pm_runtime_work+0x6e/0x90 process_one_work+0x184/0x380 worker_thread+0x2e/0x390 Bugzilla: https://bugs.archlinux.org/task/53497 Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870523 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388#c33 Fixes: |
||
Keith Packard
|
418da17214 |
drm: Pass struct drm_file * to __drm_mode_object_find [v2]
This will allow __drm_mode_object_file to be extended to perform access control checks based on the file in use. v2: Also fix up vboxvideo driver in staging [airlied: merging early as this is an API change] Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com> |