bdev_unhash(): make block device invisible to lookups by device number
bdev_drop(): drop reference to associated inode.
Both are internal, for use by genhd and partition-related code - similar
to bdev_add(). The logics in there (especially the lifetime-related
parts of it) ought to be cleaned up, but that's a separate story; here
we just encapsulate getting to associated inode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 6d4e80db4e ("block: add capacity validation in
bdev_add_partition()") add check of partition's start and end sectors to
prevent exceeding the size of the disk when adding partitions. However,
there is still no check for resizing partitions now.
Move the check to blkpg_do_ioctl() to cover resizing partitions.
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305032132.548958-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 1a721de848 ("block: don't add or resize partition on the disk
with GENHD_FL_NO_PART") prevented all operations about partitions on disks
with GENHD_FL_NO_PART in blkpg_do_ioctl() since they are meaningless.
However, it changed error code in some scenarios. So move checking
GENHD_FL_NO_PART to bdev_add_partition() to eliminate impact.
Fixes: 1a721de848 ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART")
Reported-by: Allison Karlitskaya <allison.karlitskaya@redhat.com>
Closes: https://lore.kernel.org/all/CAOYeF9VsmqKMcQjo1k6YkGNujwN-nzfxY17N3F-CMikE1tYp+w@mail.gmail.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240118130401.792757-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When zones were first added the SCSI and ATA specs, two different
models were supported (in addition to the drive managed one that
is invisible to the host):
- host managed where non-conventional zones there is strict requirement
to write at the write pointer, or else an error is returned
- host aware where a write point is maintained if writes always happen
at it, otherwise it is left in an under-defined state and the
sequential write preferred zones behave like conventional zones
(probably very badly performing ones, though)
Not surprisingly this lukewarm model didn't prove to be very useful and
was finally removed from the ZBC and SBC specs (NVMe never implemented
it). Due to to the easily disappearing write pointer host software
could never rely on the write pointer to actually be useful for say
recovery.
Fortunately only a few HDD prototypes shipped using this model which
never made it to mass production. Drop the support before it is too
late. Note that any such host aware prototype HDD can still be used
with Linux as we'll now treat it as a conventional HDD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The logic for disk->open_partitions is:
blkdev_get_by_*()
-> bdev_is_partition()
-> blkdev_get_part()
-> blkdev_get_whole() // bdev_whole->bd_openers++
-> if (part->bd_openers == 0)
disk->open_partitions++
part->bd_openers
In other words, when we first claim/open a partition we increment
disk->open_partitions and only when all part->bd_openers are closed will
disk->open_partitions be zero. That should mean that
disk->open_partitions is always > 0 as long as there's anyone that
has an open partition.
So the check for disk->open_partitions should mean that we can never
remove an active partition that has a holder and holder ops set. Assert
that in the code. The main disk isn't removed so that check doesn't work
for disk->part0 which is what we want. After all we only care about
partition not about the main disk.
Link: https://lore.kernel.org/r/20231017184823.1383356-3-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
BLKPG_DEL_PARTITION refuses to delete partitions that still have
openers, i.e., that has an elevated @bdev->bd_openers count. If a device
is claimed by setting @bdev->bd_holder and @bdev->bd_holder_ops
@bdev->bd_openers and @bdev->bd_holders are incremented.
@bdev->bd_openers is effectively guaranteed to be >= @bdev->bd_holders.
So as long as @bdev->bd_openers isn't zero we know that this partition
is still in active use and that there might still be @bdev->bd_holder
and @bdev->bd_holder_ops set.
The only current example is @fs_holder_ops for filesystems. But that
means bdev_mark_dead() which calls into
bdev->bd_holder_ops->mark_dead::fs_bdev_mark_dead() is a nop. As long as
there's an elevated @bdev->bd_openers count we can't delete the
partition and if there isn't an elevated @bdev->bd_openers count then
there's no @bdev->bd_holder or @bdev->bd_holder_ops.
So simply open-code what we need to do. This gets rid of one more
instance where we acquire s_umount under @disk->open_mutex.
Link: https://lore.kernel.org/r/20231016-fototermin-umriss-59f1ea6c1fe6@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-2-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We currently have two interfaces that take a block_devices and the find
a mounted file systems to flush or invaldidate data on it. Both are a
bit problematic because they only work for the "main" block devices
that is used as s_dev for the super_block, and because they don't call
into the file system at all.
Merge the two into a new bdev_mark_dead helper that does both the
syncing and invalidation and which is properly documented. This is
in preparation of merging the functionality into the ->mark_dead
holder operation so that it will work on additional block devices
used by a file systems and give us a single entry point for invalidation
of dead devices or media.
Note that a single standalone fsync_bdev call for an obscure ioctl
remains for now, but that one will also be deal with in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In the function bdev_add_partition(),there is no check that the start
and end sectors exceed the size of the disk before calling add_partition.
When we call the block's ioctl interface directly to add a partition,
and the capacity of the disk is set to 0 by driver,the command will
continue to execute.
Signed-off-by: Min Li <min15.li@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230619091214.31615-1-min15.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is only a single caller left, so fold the loop into that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Delay dropping the block_devices for partitions in del_gendisk until
after the call to blk_mark_disk_dead, so that we can implementat
notification of removed devices in blk_mark_disk_dead.
This requires splitting a lower-level drop_partition helper out of
delete_partition and using that from del_gendisk, while having a
common loop for the whole device and partitions that calls
remove_inode_hash, fsync_bdev and __invalidate_device before the
call to blk_mark_disk_dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the call to remove_inode_hash to the beginning of delete_partition,
as we want to prevent opening a block_device that is about to be removed
ASAP.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code for setting a block device capacity (bd_nr_sectors field of
struct block_device) is duplicated in set_capacity() and
bdev_set_nr_sectors(). Clean this up by making bdev_set_nr_sectors()
a block layer internal function defined in block/bdev.c instead of
having this function statically defined in block/partitions/core.c.
With this change, set_capacity() implementation can be simplified to
only calling bdev_set_nr_sectors().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230424131318.79935-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The uevent() callback in struct device_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jilin Yuan <yuanjilin@cdjrlc.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Gross <markgross@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sanyog Kale <sanyog.r.kale@intel.com>
Cc: Sean Young <sean@mess.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Won Chung <wonchung@google.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for Thunderbolt
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b9684a71fc ("block, loop: support partitions without scanning")
adds GD_SUPPRESS_PART_SCAN for replacing part function of
GENHD_FL_NO_PART. But looks blk_add_partitions() is missed, since
loop doesn't want to add partitions if GENHD_FL_NO_PART was set.
And it causes regression on libblockdev (as called from udisks) which
operates with the LO_FLAGS_PARTSCAN.
Fixes the issue by not adding partitions if GD_SUPPRESS_PART_SCAN is
set.
Fixes: b9684a71fc ("block, loop: support partitions without scanning")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220823103819.395776-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into their
own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmLpViQACgkQDpNsjXcp
gj5pBgf/f3+K7Hi3qw7aYQCYJQ7IA/bLyE/DLWI59kuiao6wDSve40B9YH9X++Ha
mRLp55bkQS+bwS2xa4jlqrIDJzAfNoWlXaXZHUXGL1C/52ChTF6jaH2cvO9PVlDS
7fLv1hy2LwiIdzpKJkUW7T+kcQGj3QLKqtQ4x8zD0LGMg055yvt/qndHSUi41nWT
/58+6W8Sk4vvRgkpeChFzF1lGLy00+FGT8y5V2kM9uRliFQ7XPCwqB2a3e5jbW6z
C1NXQmRnopCrnOT1TFIhK3DyX6MDIWV5qcikNAmCKFb9fQFPmjDLPt9iSoMGjw2M
Z+UVhJCaU3ISccd0DG5Ra/vzs9/O9Q==
=DgUi
-----END PGP SIGNATURE-----
Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
This relatively straightforward converion saves a call to compound_head()
hidden inside put_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
The bare use of '9' confuses some people. We also don't need this cast,
since the compiler does exactly that cast for us.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Set p->v to NULL if we try to read beyond the end of the disk, just like
we do if we get an error returned from trying to read the disk.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
That rather complicated expression is just trying to find the offset
of this sector within a page, and there are easier ways to express that.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If read_mapping_page() sees a page with PageError set, it returns a
PTR_ERR(). Checking PageError again is simply dead code.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Add the trace attributes to the default gendisk attributes, just like
we already do for partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All manipulation of bd_openers is under disk->open_mutex and will remain
so for the foreseeable future. But at least one place reads it without
the lock (blkdev_get) and there are more to be added. So make sure the
compiler does not do turn the increments and decrements into non-atomic
sequences by using an atomic_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bdev based alignment helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220415045258.199825-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the open coded offset calculation with the proper helper.
This is an ABI change in that the -1 for a misaligned partition is
properly propagated, which can be considered a bug fix and matches
what is done on the whole device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The flag to indicate an unlocked native capacity is dynamic state,
not a driver capability flag, so move it to disk->state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmF8L70QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpo9YEAC17yEJ0xwwtUUwZW8avzss4vdcIreFdiZu
gaS+9Oi1bLxj0d2SjaZXJxjT9K+W2LftEsLuQ4oM6VHiLQkcEDbjJdVm3goftTt5
aOvVormDdKbWNcGSbgxA/OcyUT39DH7y17NRVdqYzQSpnrhCod/1tb2ssck0OoYb
VEyBKogMwYeYR55Z3I8yL5pNcEhR8TihZv3rL1iQ7DNpvh5I0I9naSEtGNC84aLP
s4nwRIG+TYll+mg0sfSB29KF7xkoFQO7X7s1rnC/on+gsFEzbJcgkJPDIWeVLnLm
ma8F1i+vJliCGaztyXoleAdg5QDiFmwTQwXRPAk2u8njJhcKi/RwIk2QYMZBZmEJ
bB5EJnlnEaWxjgpCD7JDrtKgIgpbbQHc5QVHRZccsu43UqvDqOZIlvZNYY+h3ivz
jT1zKuKDaTf8YWbfdOJwqm9e+qyR0AFm3rLMdHO58QEh1DBvSLIIdRCNE8wX7nFM
Wx/GmQEkPqNTIZwJOQJMygK+sIuFUDybt3oAH2pjX1zyMx7kTJkrXvj0dhSS/B5u
+gfMs3otWqxQ4P1qfnaUd9mYl8JabV7le2NHzhjdARm4NKFJEtcJe5BJBwiMbo0n
vodqt7aUIAXwMrZXnWZL+w8CobhJBp8I5XHUgng147gDBuCjYQjBQT334auAXxgz
MUCgbjBDqw==
=Vadi
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block
Pull bdev size cleanups from Jens Axboe:
"Clean up the bdev size handling with new bdev_nr_bytes() helper"
* tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block: (34 commits)
partitions/ibm: use bdev_nr_sectors instead of open coding it
partitions/efi: use bdev_nr_bytes instead of open coding it
block/ioctl: use bdev_nr_sectors and bdev_nr_bytes
block: cache inode size in bdev
udf: use sb_bdev_nr_blocks
reiserfs: use sb_bdev_nr_blocks
ntfs: use sb_bdev_nr_blocks
jfs: use sb_bdev_nr_blocks
ext4: use sb_bdev_nr_blocks
block: add a sb_bdev_nr_blocks helper
block: use bdev_nr_bytes instead of open coding it in blkdev_fallocate
squashfs: use bdev_nr_bytes instead of open coding it
reiserfs: use bdev_nr_bytes instead of open coding it
pstore/blk: use bdev_nr_bytes instead of open coding it
ntfs3: use bdev_nr_bytes instead of open coding it
nilfs2: use bdev_nr_bytes instead of open coding it
nfs/blocklayout: use bdev_nr_bytes instead of open coding it
jfs: use bdev_nr_bytes instead of open coding it
hfsplus: use bdev_nr_sectors instead of open coding it
hfs: use bdev_nr_sectors instead of open coding it
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmF8KDgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpmQ2D/wO0nH3U+3+OZChi3XUwYck9Dev3o6BANCF
ClATiK/kivZY0xY1r8J4ixirZo2gcjIMpWSC3JGYZ5LdspfmYGLUbMjfZsaeU23i
lAKaX1IqfArmHN76k3IU1bKCg7B0/LFwC0q9QTFWTSwNSs8RK/EZLJ61U1hEXUb3
OfIpaMmvPiMaU7yuPqhcZK14m1cg1srrLM4rFB/PqsWWStF07pHq32WeArGDAU0e
Fe0YSnYD7qqA5Qc37KwqjCTmmxKX5YZf7etIcA6p3DNmwcuQrVNzKoCH/ZEDijaD
E2bS/BWbN1x96+rtoEZfBYEaNIrkmJzmW6+fJ53OITbJF3KqP6V66erhqNcFYCzC
mhFlRe7voXb/8AP7zQqSIhK529BUBM36sQ6nF7EiQcDrfLc1z39mq6eblUxbknIA
DDPISD5Tseik9N9x0bc7vINseKyHI1E90VAU/XKADcuGbzLvehPx+2p+Iq5ch5Ah
oa1G3RdlWWQOZxphJHWJhu1qMfo5+FP9dFZj1aoo7b8Kbc/CedyoQe71cpIE5wNh
Jj/EpWJnuyKXwuTic2VYGC+6ezM9O5DSdqCfP3YuZky95VESyvRCKJYMMgBYRVdC
/LuxhnBXIY2G8An7ZTnX0kLCCvLbapIwa0NyA98/xeOngO843coJ6wn8ZmE9LJNH
kMmpCygUrA==
=QWC+
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
Reading the inode size brings in a new cacheline for IO submit, and
it's in the hot path being checked for every single IO. When doing
millions of IOs per core per second, this is noticeable overhead.
Cache the nr_sectors in the bdev itself.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When adding partitions to the disk, the reference count of the disk
object is increased. then alloc partition device and called
device_add(), if the device_add() return error, the reference
count of the disk object will be reduced twice, at put_device(pdev)
and put_disk(disk). this leads to the end of the object's life cycle
prematurely, and trigger following calltrace.
__init_work+0x2d/0x50 kernel/workqueue.c:519
synchronize_rcu_expedited+0x3af/0x650 kernel/rcu/tree_exp.h:847
bdi_remove_from_list mm/backing-dev.c:938 [inline]
bdi_unregister+0x17f/0x5c0 mm/backing-dev.c:946
release_bdi+0xa1/0xc0 mm/backing-dev.c:968
kref_put include/linux/kref.h:65 [inline]
bdi_put+0x72/0xa0 mm/backing-dev.c:976
bdev_free_inode+0x11e/0x220 block/bdev.c:408
i_callback+0x3f/0x70 fs/inode.c:226
rcu_do_batch kernel/rcu/tree.c:2508 [inline]
rcu_core+0x76d/0x16c0 kernel/rcu/tree.c:2743
__do_softirq+0x1d7/0x93b kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0xf2/0x130 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x93/0xc0
making disk is NULL when calling put_disk().
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211018103422.2043-1-qiang.zhang1211@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The dev_t is used as the inode hash, so we should only released it
once then block device inode is gone from the inode cache. Move it
to bdev_free_inode to ensure that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816122614.601358-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bdev_resize_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bdev_del_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bdev_add_partition can only operate on the whole device. Make that clear
by passing a gendisk instead of a block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210810154512.1809898-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Partition scanning only happens on the whole device, so pass a
struct gendisk instead of the whole device block_device to the scanners.
This allows to simplify printing the device name in various places as the
disk name is available in disk->name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210810154512.1809898-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just check inode_unhashed on the whole device bdev inode instead,
and provide a helper to check for that information.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disk_name for partition 0 just copies out the disk_name field. Replace
the call to disk_name with a %s format specifier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210727062518.122108-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we've stopped using inode references for anything meaninful
in the block layer get rid of the helper to put it and just open code
the call to iput on the block_device inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of acquiring an inode reference on open make sure partitions
always hold device model references to the disk while alive, and switch
open to grab only a device model reference to the opened block device.
If that is a partition the disk reference is transitively held by the
partition already.
Link: https://lore.kernel.org/r/20210722075402.983367-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the allocation of bd_meta_info after initializing the struct device
to avoid the special bdput error handling path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210722075402.983367-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a lockdep assert instead of the outdated locking comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Link: https://lore.kernel.org/r/20210722075402.983367-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
