When transitioning to the GTT or CPU domain we wait on all rendering
from i915 to complete (with the optimisation of allowing concurrent read
access by both the GPU and client). We don't yet ensure all rendering
from third parties (tracked by implicit fences on the dma-buf) is
complete. Since implicitly tracked rendering by third parties will
ignore our cache-domain tracking, we have to always wait upon rendering
from third-parties when transitioning to direct access to the backing
store. We still rely on clients notifying us of cache domain changes
(i.e. they need to move to the GTT read or write domain after doing a CPU
access before letting the third party render again).
v2:
This introduces a potential WARN_ON into i915_gem_object_free() as the
current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To
hit this path we first need to render with the GPU, have a dma-buf
attached with an unsignaled fence and then interrupt the wait. It does
get fixed later in the series (when i915_vma_unbind() only waits on the
active VMA and not all, including third-party, rendering.
To offset that risk, use the __i915_vma_unbind_no_wait hack.
Testcase: igt/prime_vgem/basic-fence-read
Testcase: igt/prime_vgem/basic-fence-mmap
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk
A foreign dma-buf does not share our cache domain tracking, and we rely
on the producer ensuring cache coherency. Marking them as being in the
CPU domain is incorrect.
v2: Add commentary about the GTT domain. This is not the best place for
it, but pending an actual overhaul of our domain tracking and explaining
each one, this comment should help the next reader...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-7-git-send-email-chris@chris-wilson.co.uk
Since commit a6f766f397 ("drm/i915: Limit ring synchronisation (sw
sempahores) RPS boosts") and commit bcafc4e38b ("drm/i915: Limit mmio
flip RPS boosts") we have limited the waitboosting for semaphores and
flips. Ideally we do not want to boost in either of these instances as no
userspace consumer is waiting upon the results (though a userspace producer
may be stalled trying to submit an execbuf - but in this case the
producer is being throttled due to the engine being saturated with
work). With the introduction of NO_WAITBOOST in the previous patch, we
can finally disable these needless boosts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-6-git-send-email-chris@chris-wilson.co.uk
We want to restrict waitboosting to known process contexts, where we can
track which clients are receiving waitboosts and prevent excessive power
wasting. For fence_wait() we do not have any client tracking and so that
leaves it open to abuse.
v2: Hide the IS_ERR_OR_NULL testing for special clients
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-5-git-send-email-chris@chris-wilson.co.uk
dma-buf provides a generic fence class for interoperation between
drivers. Internally we use the request structure as a fence, and so with
only a little bit of interfacing we can rebase those requests on top of
dma-buf fences. This will allow us, in the future, to pass those fences
back to userspace or between drivers.
v2: The fence_context needs to be globally unique, not just unique to
this device.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-4-git-send-email-chris@chris-wilson.co.uk
Following a GPU reset upon hang, we retire all the requests and then
mark them all as complete. If we mark them as complete first, we both
keep the normal retirement order (completed first then retired) and
provide a small optimisation for concurrent lookups.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-3-git-send-email-chris@chris-wilson.co.uk
In order to keep the memory allocated for requests reasonably tight, try
to reuse the oldest request (so long as it is completed and has no
external references) for the next allocation.
v2: Throw in a comment to hopefully make sure no one mistakes the
optimistic retirement of the oldest request for simply stealing it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-2-git-send-email-chris@chris-wilson.co.uk
Migrate the request operations out of the main body of i915_gem.c and
into their own C file for easier expansion.
v2: Move __i915_add_request() across as well
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-1-git-send-email-chris@chris-wilson.co.uk
This reverts commit 041824ee25.
We have latency issues that might impact the performance: #96606.
and hangs and loading issues on resume after S4: #96526.
This is also blocking a platform milestone so let's disable
this for now while we make sure we don't have any more loading
issue, or related basic hangs and it pass BAT for real in all
platofmrs.
In case BAT is wrong let's first fix BAT before re-enable it here.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96606
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Stable <stable@vger.kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Christophe Prigent <christophe.prigent@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468884477-30086-1-git-send-email-rodrigo.vivi@intel.com
The purpose for each MOCS entry isn't well defined atm. Defining these
is important to remove any uncertainty about the use of these entries
for example in terms of performance and GPU/CPU coherency.
Suggested by Ville.
v4:
- Rename I915_MOCS_AUTO to I915_MOCS_PTE. (Chris)
CC: Rong R Yang <rong.r.yang@intel.com>
CC: Yakui Zhao <yakui.zhao@intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467383528-16142-1-git-send-email-imre.deak@intel.com
Setting a write-back cache policy in the MOCS entry definition also
implies snooping, which has a considerable overhead. This is
unexpected for a few reasons:
- From user-space's point of view since it didn't want a coherent
surface (it didn't set the buffer as such via the set caching IOCTL).
- There is a separate MOCS entry field for snooping (which we never
set).
- This MOCS table is about caching in (e)LLC and there is no (e)LLC on
BXT. There is a separate table for L3 cache control.
Considering the above the current behavior of snooping looks like an
unintentional side-effect of the WB setting. Changing it to be LLC-UC
gets rid of the snooping without any ill-effects. For a coherent
surface the application would use a separate MOCS entry at index 1 and
call the set caching IOCTL to setup the PTE entries for the
corresponding buffer to be snooped. In the future we could also add a
new MOCS entry for coherent surfaces.
This resulted in 70% improvement in synthetic texturing benchmarks.
Kudos to Valtteri Rantala, Eero Tamminen and Michael T Frederick and
Ville who helped to narrow the source of problem to the kernel and to
the snooping behaviour in particular.
With a follow-up change to adjust the 3rd entry value
igt/gem_mocs_settings is passing after this change.
v2:
- Rebase on v2 of patch 1/2.
v3:
- Set the entry as LLC uncached instead of PTE-passthrough. This way
we also keep snooping disabled, but we also make the cacheability/
coherency setting indepent of the PTE which is managed by the
kernel. (Chris)
CC: Rong R Yang <rong.r.yang@intel.com>
CC: Yakui Zhao <yakui.zhao@intel.com>
CC: Valtteri Rantala <valtteri.rantala@intel.com>
CC: Eero Tamminen <eero.t.tamminen@intel.com>
CC: Michael T Frederick <michael.t.frederick@intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Rong R Yang <rong.r.yang@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467380406-11954-3-git-send-email-imre.deak@intel.com
Use named struct initializers for clarity. Also fix the target cache
definition to reflect its role in GEN9 onwards. On GEN8 a TC value of 0
meant ELLC but on GEN9+ it means the TC and LRU controls are taken from
the PTE.
No functional change, igt/gem_mocs_settings still passing after this
change.
v2: (Chris)
- Add back the hexa literals for the entries.
Add note that igt/gem_mocs_settings still passes.
CC: Rong R Yang <rong.r.yang@intel.com>
CC: Yakui Zhao <yakui.zhao@intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467380406-11954-2-git-send-email-imre.deak@intel.com
Fairly minimal, there's still lots of functions without any docs, and
which aren't static. But probably we want to first clean this up some more.
- Drop the bogus const. Marking argument pointers themselves (instead of
what they point at) as const provides roughly 0 value. And it's confusing,
since the data the pointer points at _is_ being changed.
- Remove kerneldoc for static functions. Keep comments where they seem valuable.
- Indent and whitespace fixes.
- Blockquote the bit field definitions of the descriptor for correct layouting.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-9-git-send-email-daniel.vetter@ffwll.ch
Even after adding individual page support for GTT mmaping, we can still
fail to find any space within the mappable region, and
drm_mm_insert_node() will then report ENOSPC. We have to then handle
this error by using the shmem access to the pages.
Fixes: b50a53715f ("drm/i915: Support for pread/pwrite ... objects")
Testcase: igt/gem_concurrent_blit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com
Link: http://patchwork.freedesktop.org/patch/msgid/1468690956-23480-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Precursor for fix to secure batch execution. We will need to be able to
retrieve the batch VMA (as well as the batch itself) from the eb list,
so this patch extracts that part of eb_get_batch() into a separate
function, and moves both parts to a more logical place in the file, near
where the eb list is created.
Also, it may not be obvious, but the current execbuffer2 ioctl interface
requires that the buffer object containing the batch-to-be-executed be
the LAST entry in the exec2_list[] array (I expected it to be the
first!).
To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)"
in the old version of eb_get_batch() with the equivalent but more
explicit
"list_last_entry(&eb->vmas,...)"
in the new eb_get_batch_vma() and of course add an explanatory comment.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468504324-12690-2-git-send-email-david.s.gordon@intel.com
Two different sets of flag bits are stored in the 'flags' member of a
'struct drm_i915_gem_exec_object2', and they're defined in two different
source files, increasing the risk of an accidental clash.
Some flags in this field are supplied by the user; these are defined in
i915_drm.h, and they start from the LSB and work up.
Other flags are defined in i915_gem_execbuffer, for internal use within
that file only; they start from the MSB and work down.
So here we add a compile-time check that the two sets of flags do not
overlap, which would cause all sorts of confusion.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468504324-12690-1-git-send-email-david.s.gordon@intel.com
The i915 driver is now using atomic properties and atomic commit
to handle the legacy set gamma IOCTL. However, if the driver is
configured without atomic (nuclear_pageflip = false), it won't
update the legacy properties for degamma_lut, gamma_lut and ctm
leaving them out of sync with the atomic version of the properties.
Until the driver is full atomic, make sure we update the non-atomic
version of the properties.
v2: Update the comment with a FIXME. (Daniel)
v3: Update arguments of the gamma_set vfunc (Lionel)
v4: Fixed vfunc prototype (Lionel)
igt-testcase: kms_pipe_color / legacy-gamma-reset-pipeX
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org #v4.7
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468591142-2253-1-git-send-email-lionel.g.landwerlin@intel.com
eDP should be treated as connected even if doesn't have an EDID. In that
case we'll use the timings from the VBT. That used to be the case until
commit f21a21983e ("drm/i915: Splitting intel_dp_detect")
broke things by considering even eDP disconnected if we fail to get
an EDID for it.
Fix things up again by treating eDP as always connected.
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Larry Finger <larry.finger@lwfinger.net>
Reported-by: Larry Finger <larry.finger@lwfinger.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96675
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: f21a21983e ("drm/i915: Splitting intel_dp_detect")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468836914-16537-1-git-send-email-ville.syrjala@linux.intel.com
Before suspend, and especially before building the hibernation image, we
need to context image to be coherent in memory. To do this we require
that we perform a context switch to a disposable context (i.e. the
dev_priv->kernel_context) - when that switch is complete, all other
context images will be complete. This leaves the kernel_context image as
incomplete, but fortunately that is disposable and we can do a quick
fixup of the logical state after resuming.
v2: Share the nearly identical code to switch to the kernel context with
eviction.
v3: Explain why we need the switch and reset.
Testcase: igt/gem_exec_suspend # bsw
References: https://bugs.freedesktop.org/show_bug.cgi?id=96526
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468590980-6186-2-git-send-email-chris@chris-wilson.co.uk
Currently execlists is exempt from emitting a request to switch each
ring away from the current context over to the dev_priv->kernel_context
(for whatever reason, just under execlists the GGTT is unlikely to be as
fragmented, however the switch may help in some extreme cases). Extract
the switcher and enable it for execlsts as well, as we need to do so in
a later patch to force the context switch before suspend. (And since for
that switch we explicitly require the disposable kernel context, rename
the extracted function.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468590980-6186-1-git-send-email-chris@chris-wilson.co.uk
If the fbdev probing fails, and in our error path we fail to clear the
dev_priv->fbdev, then we can try and use a dangling fbdev pointer, and
in particular a NULL fb. This could also happen in pathological cases
where we try to operate on the fbdev prior to it being probed.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468431285-28264-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Since the suspend_work can arm itself if the console_lock() is currently
held elsewhere, simply calling flush_work() doesn't guarantee that the
work is idle upon return. To do so requires using cancel_work_sync().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468431285-28264-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
The i915 driver checks for color management properties changes as part
of a plane update. Therefore a color management update must imply a
plane update, otherwise we never update the transformation matrixes
and degamma/gamma LUTs.
v2: add comment about moving the commit of color management registers
to an async worker
v3: Commit color management register right after vblank
v4: Move back color management commit condition together with planes
commit
v5: Trigger color management commit through the planes commit (Daniel)
v6: Make plane change update more readable
Fixes: 20a34e78f0 (drm/i915: Update color management during vblank evasion.)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
References: https://lkml.org/lkml/2016/7/14/614
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464183041-8478-1-git-send-email-lionel.g.landwerlin@intel.com
Unfortunately, there's two situations where we lose hpd right now:
- Runtime suspend
- When we've shut off all of the power wells on Valleyview/Cherryview
While it would be nice if this didn't cause issues, this has the
ability to get us in some awkward states where a user won't be able to
get their display to turn on. For instance; if we boot a Valleyview
system without any monitors connected, it won't need any of it's power
wells and thus shut them off. Since this causes us to lose HPD, this
means that unless the user knows how to ssh into their machine and do a
manual reprobe for monitors, none of the monitors they connect after
booting will actually work.
Eventually we should come up with a better fix then having to enable
polling for this, since this makes rpm a lot less useful, but for now
the infrastructure in i915 just isn't there yet to get hpd in these
situations.
Changes since v1:
- Add comment explaining the addition of the if
(!mode_config->poll_running) in intel_hpd_init()
- Remove unneeded if (!dev->mode_config.poll_enabled) in
i915_hpd_poll_init_work()
- Call to drm_helper_hpd_irq_event() after we disable polling
- Add cancel_work_sync() call to intel_hpd_cancel_work()
Changes since v2:
- Apparently dev->mode_config.poll_running doesn't actually reflect
whether or not a poll is currently in progress, and is actually used
for dynamic module paramter enabling/disabling. So now we instead
keep track of our own poll_running variable in dev_priv->hotplug
- Clean i915_hpd_poll_init_work() a little bit
Changes since v3:
- Remove the now-redundant connector loop in intel_hpd_init(), just
rely on intel_hpd_poll_enable() for setting connector->polled
correctly on each connector
- Get rid of poll_running
- Don't assign enabled in i915_hpd_poll_init_work before we actually
lock dev->mode_config.mutex
- Wrap enabled assignment in i915_hpd_poll_init_work() in READ_ONCE()
for doc purposes
- Do the same for dev_priv->hotplug.poll_enabled with WRITE_ONCE in
intel_hpd_poll_enable()
- Add some comments about racing not mattering in intel_hpd_poll_enable
Changes since v4:
- Rename intel_hpd_poll_enable() to intel_hpd_poll_init()
- Drop the bool argument from intel_hpd_poll_init()
- Remove redundant calls to intel_hpd_poll_init()
- Rename poll_enable_work to poll_init_work
- Add some kerneldoc for intel_hpd_poll_init()
- Cross-reference intel_hpd_poll_init() in intel_hpd_init()
- Just copy the loop from intel_hpd_init() in intel_hpd_poll_init()
Changes since v5:
- Minor kerneldoc nitpicks
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
One of the things preventing us from using polling is the fact that
calling valleyview_crt_detect_hotplug() when there's a VGA cable
connected results in sending another hotplug. With polling enabled when
HPD is disabled, this results in a scenario like this:
- We enable power wells and reset the ADPA
- output_poll_exec does force probe on VGA, triggering a hpd
- HPD handler waits for poll to unlock dev->mode_config.mutex
- output_poll_exec shuts off the ADPA, unlocks dev->mode_config.mutex
- HPD handler runs, resets ADPA and brings us back to the start
This results in an endless irq storm getting sent from the ADPA
whenever a VGA connector gets detected in the middle of polling.
Somewhat based off of the "drm/i915: Disable CRT HPD around force
trigger" patch Ville Syrjälä sent a while back
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
While VGA hotplugging worked(ish) before, it looks like that was mainly
because we'd unintentionally enable it in
valleyview_crt_detect_hotplug() when we did a force trigger. This
doesn't work reliably enough because whenever the display powerwell on
vlv gets disabled, the values set in VLV_ADPA get cleared and
consequently VGA hotplugging gets disabled. This causes bugs such as one
we found on an Intel NUC, where doing the following sequence of
hotplugs:
- Disconnect all monitors
- Connect VGA
- Disconnect VGA
- Connect HDMI
Would result in VGA hotplugging becoming disabled, due to the powerwells
getting toggled in the process of connecting HDMI.
Changes since v3:
- Expose intel_crt_reset() through intel_drv.h and call that in
vlv_display_power_well_init() instead of
encoder->base.funcs->reset(&encoder->base);
Changes since v2:
- Use intel_encoder structs instead of drm_encoder structs
Changes since v1:
- Instead of handling the register writes ourself, we just reuse
intel_crt_detect()
- Instead of resetting the ADPA during display IRQ installation, we now
reset them in vlv_display_power_well_init()
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Rebase over dev_priv/drm_device embedding.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This lets call intel_crt_reset() in contexts where IRQs are disabled and
as such, can't hold the locks required to work with the connectors.
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function is no longer used outside of intel_pm.c so we can stop
exposing it and rename the __gen6_update_ring_freq() to take its place.
Suggested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-8-git-send-email-chris@chris-wilson.co.uk
Some hardware requires a valid render context before it can initiate
rc6 power gating of the GPU; the default state of the GPU is not
sufficient and may lead to undefined behaviour. The first execution of
any batch will load the "golden render state", at which point it is safe
to enable rc6. As we do not forcibly load the kernel context at resume,
we have to hook into the batch submission to be sure that the render
state is setup before enabling rc6.
However, since we don't enable powersaving until that first batch, we
queued a delayed task in order to guarantee that the batch is indeed
submitted.
v2: Rearrange intel_disable_gt_powersave() to match.
v3: Apply user specified cur_freq (or idle_freq if not set).
v4: Give in, and supply a delayed work to autoenable rc6
v5: Mika suggested a couple of better names for delayed_resume_work
v6: Rebalance rpm_put around the autoenable task
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-7-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
To allow the user finer control over waitboosting, allow them to set the
frequency we request for the boost. This also them allows to effectively
disable the boosting by setting the boost request to a low frequency.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-5-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Select idle frequency during initialisation, then reset the last known
frequency when re-enabling. This allows us to preserve the user selected
frequency across resets.
v2: Stop CHV from overriding the user's choice in cherryview_enable_rps()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-2-git-send-email-chris@chris-wilson.co.uk
Upon resetting the GPU, we force the engines to be idle by clearing
their request lists. However, I neglected to clear the GT active status
and so the next request following the reset was not marking the device
as busy again. (We had to wait until any outstanding retire worker
finally ran and cleared the active status.)
Fixes: 67d97da349 ("drm/i915: Only start retire worker when idle")
Testcase: igt/pm_rps/reset
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This should already be handled by drm_gem_object_release, which is
called later on.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467720019-31876-1-git-send-email-matthew.auld@intel.com
Dell XPS 13 9350 apparently doesn't like it when we use the panel type
from OpRegion. The OpRegion panel type (0) tells us to use use low
vswing for eDP, whereas the VBT panel type (2) tells us to use normal
vswing. The problem is that low vswing results in some display flickers.
Since no one seems to know how this stuff is supposed to be handled,
let's just ignore the OpRegion panel type on SKL for now.
v2: Print the panel type correctly in the debug output
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: drm-intel-fixes@lists.freedesktop.org
References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html
Fixes: a05628195a ("drm/i915: Get panel_type from OpRegion panel details")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468324837-29237-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Common code deserves to be put in a separate file from legacy and
execlists implementation for clarity and ease of maintenance.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Engine contains dev_priv so need to pass it in.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Use more of the shared engine setup data for legacy engine
initialization. This time to simplify the irq initialization
code.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
With the unified common engine setup done, and the execlist engine
initialization loop clearly split into two phases, we can eliminate
the separate legacy engine initialization code.
v2: Fix cleanup path for legacy.
v3: Rename constructors. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Move the execlist engine setup to vfuncs so that the engine
init loop is clearly split into the mode agnostic and
specific steps.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
intel_lrc.c has a table of "logical rings" (meaning engines), while
intel_ringbuffer.c has separately open-coded initialisation for each
engine. We can deduplicate this somewhat by using the same first-stage
engine-setup function for both modes.
So here we expose the function that transfers information from the
static table of (all) known engines to the dev_priv->engine array of
engines available on this device (adjusting the names along the way)
and then embed calls to it in both the LRC and the legacy-mode setup.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
