This patch uses adding up size to get the ADD_ADDR suboption length rather
than returning the ADD_ADDR size constants.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rfc8684, the length of ADD_ADDR suboption with IPv4 address and port
is 18 octets, but mptcp_write_options is 32-bit aligned, so we need to
pad it to 20 octets. All the other port related option lengths need to
be added up 2 octets similarly.
This patch added a new field 'port' in mptcp_out_options. When this
field is set with a port number, we need to add up 4 octets for the
ADD_ADDR suboption, and put the port number into the suboption.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The length of ADD_ADDR6 is 12 octets longer than ADD_ADDR. That's the
only difference between them.
This patch dropped the duplicate code between ADD_ADDR and ADD_ADDR6
suboptions writing, and unify them into one.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two differences between ADD_ADDR suboption and ADD_ADDR echo
suboption: The length of the former is 8 octets longer than the length
of the latter. The former's echo-flag is 0, and latter's echo-flag is 1.
This patch added two local variables, len and echo, to unify ADD_ADDR
and ADD_ADDR echo suboptions writing.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Switch to RCU in x_tables to fix possible NULL pointer dereference,
from Subash Abhinov Kasiviswanathan.
2) Fix netlink dump of dynset timeouts later than 23 days.
3) Add comment for the indirect serialization of the nft commit mutex
with rtnl_mutex.
4) Remove bogus check for confirmed conntrack when matching on the
conntrack ID, from Brett Mastbergen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When cwnd is not a multiple of the TSO skb size of N*MSS, we can get
into persistent scenarios where we have the following sequence:
(1) ACK for full-sized skb of N*MSS arrives
-> tcp_write_xmit() transmit full-sized skb with N*MSS
-> move pacing release time forward
-> exit tcp_write_xmit() because pacing time is in the future
(2) TSQ callback or TCP internal pacing timer fires
-> try to transmit next skb, but TSO deferral finds remainder of
available cwnd is not big enough to trigger an immediate send
now, so we defer sending until the next ACK.
(3) repeat...
So we can get into a case where we never mark ourselves as
cwnd-limited for many seconds at a time, even with
bulk/infinite-backlog senders, because:
o In case (1) above, every time in tcp_write_xmit() we have enough
cwnd to send a full-sized skb, we are not fully using the cwnd
(because cwnd is not a multiple of the TSO skb size). So every time we
send data, we are not cwnd limited, and so in the cwnd-limited
tracking code in tcp_cwnd_validate() we mark ourselves as not
cwnd-limited.
o In case (2) above, every time in tcp_write_xmit() that we try to
transmit the "remainder" of the cwnd but defer, we set the local
variable is_cwnd_limited to true, but we do not send any packets, so
sent_pkts is zero, so we don't call the cwnd-limited logic to update
tp->is_cwnd_limited.
Fixes: ca8a226343 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Reported-by: Ingemar Johansson <ingemar.s.johansson@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201209035759.1225145-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The offending commit introduces a cleanup callback that is invoked
when the driver module is removed to clean up the tunnel device
flow block. But it returns on the first iteration of the for loop.
The remaining indirect flow blocks will never be freed.
Fixes: 1fac52da59 ("net: flow_offload: consolidate indirect flow_block infrastructure")
CC: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
For DCTCP, we have to retain the ECT bits set by the congestion control
algorithm on the socket when reflecting syn TOS in syn-ack, in order to
make ECN work properly.
Fixes: ac8f1710c1 ("tcp: reflect tos value received in SYN to the socket")
Reported-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot reported a stack overflow in bitmap_from_arr32() called from
ethnl_parse_bitset() when bitset from netlink message is longer than
target bitmap length. While ethnl_compact_sanity_checks() makes sure that
trailing part is all zeros (i.e. the request does not try to touch bits
kernel does not recognize), we also need to cap change_bits to nbits so
that we don't try to write past the prepared bitmaps.
Fixes: 88db6d1e4f ("ethtool: add ethnl_parse_bitset() helper")
Reported-by: syzbot+9d39fa49d4df294aab93@syzkaller.appspotmail.com
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/3487ee3a98e14cd526f55b6caaa959d2dcbcad9f.1607465316.git.mkubecek@suse.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The isotp socket can be widely configured in its behaviour regarding addressing
types, fill-ups, receive pattern tests and link layer length. Usually all
these settings need to be fixed before bind() and can not be changed
afterwards.
This patch adds a check to enforce the common usage pattern.
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Thomas Wagner <thwa1@web.de>
Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 7f0a838254 ("bpf, xdp: Maintain info on attached XDP BPF
programs in net_device"), the XDP program attachment info is now maintained
in the core code. This interacts badly with the xdp_attachment_flags_ok()
check that prevents unloading an XDP program with different load flags than
it was loaded with. In practice, two kinds of failures are seen:
- An XDP program loaded without specifying a mode (and which then ends up
in driver mode) cannot be unloaded if the program mode is specified on
unload.
- The dev_xdp_uninstall() hook always calls the driver callback with the
mode set to the type of the program but an empty flags argument, which
means the flags_ok() check prevents the program from being removed,
leading to bpf prog reference leaks.
The original reason this check was added was to avoid ambiguity when
multiple programs were loaded. With the way the checks are done in the core
now, this is quite simple to enforce in the core code, so let's add a check
there and get rid of the xdp_attachment_flags_ok() callback entirely.
Fixes: 7f0a838254 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
There's no need to defer allocation of pages for the receive buffer.
- This upcall is quite infrequent
- gssp_alloc_receive_pages() can allocate the pages with GFP_KERNEL,
unlike the transport
- gssp_alloc_receive_pages() knows exactly how many pages are needed
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
We can simplify code around cache_downcall unifying memory
allocations using kvmalloc. This has the benefit of getting rid of
cache_slow_downcall (and queue_io_mutex), and also matches userland
allocation size and limits.
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since commit 656c8e9cc1 ("netfilter: conntrack: Use consistent ct id
hash calculation") the ct id will not change from initialization to
confirmation. Removing the confirmation check allows for things like
adding an element to a 'typeof ct id' set in prerouting upon reception
of the first packet of a new connection, and then being able to
reference that set consistently both before and after the connection
is confirmed.
Fixes: 656c8e9cc1 ("netfilter: conntrack: Use consistent ct id hash calculation")
Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This moves the bpf_sock_from_file definition into net/core/filter.c
which only gets compiled with CONFIG_NET and also moves the helper proto
usage next to other tracing helpers that are conditional on CONFIG_NET.
This avoids
ld: kernel/trace/bpf_trace.o: in function `bpf_sock_from_file':
bpf_trace.c:(.text+0xe23): undefined reference to `sock_from_file'
When compiling a kernel with BPF and without NET.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20201208173623.1136863-1-revest@chromium.org
Before commit a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
small tcp_rmem[1] values were overridden by tcp_fixup_rcvbuf() to accommodate various MSS.
This is no longer the case, and Hazem Mohamed Abuelfotoh reported
that DRS would not work for MTU 9000 endpoints receiving regular (1500 bytes) frames.
Root cause is that tcp_init_buffer_space() uses tp->rcv_wnd for upper limit
of rcvq_space.space computation, while it can select later a smaller
value for tp->rcv_ssthresh and tp->window_clamp.
ss -temoi on receiver would show :
skmem:(r0,rb131072,t0,tb46080,f0,w0,o0,bl0,d0) rcv_space:62496 rcv_ssthresh:56596
This means that TCP can not increase its window in tcp_grow_window(),
and that DRS can never kick.
Fix this by making sure that rcvq_space.space is not bigger than number of bytes
that can be held in TCP receive queue.
People unable/unwilling to change their kernel can work around this issue by
selecting a bigger tcp_rmem[1] value as in :
echo "4096 196608 6291456" >/proc/sys/net/ipv4/tcp_rmem
Based on an initial report and patch from Hazem Mohamed Abuelfotoh
https://lore.kernel.org/netdev/20201204180622.14285-1-abuehaze@amazon.com/
Fixes: a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Fixes: 041a14d267 ("tcp: start receiver buffer autotuning sooner")
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-12-07
Here's the main bluetooth-next pull request for the 5.11 kernel.
- Updated Bluetooth entries in MAINTAINERS to include Luiz von Dentz
- Added support for Realtek 8822CE and 8852A devices
- Added support for MediaTek MT7615E device
- Improved workarounds for fake CSR devices
- Fix Bluetooth qualification test case L2CAP/COS/CFD/BV-14-C
- Fixes for LL Privacy support
- Enforce 16 byte encryption key size for FIPS security level
- Added new mgmt commands for extended advertising support
- Multiple other smaller fixes & improvements
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
`tipc_node_apply_property` does a null check on a `tipc_link_entry`
pointer but also accesses the same pointer out of the null check block.
This triggers a warning on Coverity Static Analyzer because we're
implying that `e->link` can BE null.
Move "Update MTU for node link entry" line into if block to make sure
that we're not in a state that `e->link` is null.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an explicit comment in the code to describe the indirect
serialization of the holders of the commit_mutex with the rtnl_mutex.
Commit 90d2723c6d ("netfilter: nf_tables: do not hold reference on
netdevice from preparation phase") already describes this, but a comment
in this case is better for reference.
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use nf_msecs_to_jiffies64 and nf_jiffies64_to_msecs as provided by
8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23
days"), otherwise ruleset listing breaks.
Fixes: a8b1e36d0d ("netfilter: nft_dynset: fix element timeout for HZ != 1000")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
These warnings become somewhat more informative when they include the
MTU value that could not be set and not just the errno.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20201205133944.10182-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In AF_XDP the socket state needs to be checked, prior touching the
members of the socket. This was not the case for the recvmsg
implementation. Fix that by moving the xsk_is_bound() call.
Fixes: 45a8668184 ("xsk: Add support for recvmsg()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201207082008.132263-1-bjorn.topel@gmail.com
When running concurrent iptables rules replacement with data, the per CPU
sequence count is checked after the assignment of the new information.
The sequence count is used to synchronize with the packet path without the
use of any explicit locking. If there are any packets in the packet path using
the table information, the sequence count is incremented to an odd value and
is incremented to an even after the packet process completion.
The new table value assignment is followed by a write memory barrier so every
CPU should see the latest value. If the packet path has started with the old
table information, the sequence counter will be odd and the iptables
replacement will wait till the sequence count is even prior to freeing the
old table info.
However, this assumes that the new table information assignment and the memory
barrier is actually executed prior to the counter check in the replacement
thread. If CPU decides to execute the assignment later as there is no user of
the table information prior to the sequence check, the packet path in another
CPU may use the old table information. The replacement thread would then free
the table information under it leading to a use after free in the packet
processing context-
Unable to handle kernel NULL pointer dereference at virtual
address 000000000000008e
pc : ip6t_do_table+0x5d0/0x89c
lr : ip6t_do_table+0x5b8/0x89c
ip6t_do_table+0x5d0/0x89c
ip6table_filter_hook+0x24/0x30
nf_hook_slow+0x84/0x120
ip6_input+0x74/0xe0
ip6_rcv_finish+0x7c/0x128
ipv6_rcv+0xac/0xe4
__netif_receive_skb+0x84/0x17c
process_backlog+0x15c/0x1b8
napi_poll+0x88/0x284
net_rx_action+0xbc/0x23c
__do_softirq+0x20c/0x48c
This could be fixed by forcing instruction order after the new table
information assignment or by switching to RCU for the synchronization.
Fixes: 80055dab5d ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore")
Reported-by: Sean Tranchetti <stranche@codeaurora.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2020-12-07
1) Sysbot reported fixes for the new 64/32 bit compat layer.
From Dmitry Safonov.
2) Fix a memory leak in xfrm_user_policy that was introduced
by adding the 64/32 bit compat layer. From Yu Kuai.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
net: xfrm: fix memory leak in xfrm_user_policy()
xfrm/compat: Don't allocate memory with __GFP_ZERO
xfrm/compat: memset(0) 64-bit padding at right place
xfrm/compat: Translate by copying XFRMA_UNSPEC attribute
====================
Link: https://lore.kernel.org/r/20201207093937.2874932-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When do cat /proc/net/netstat, the output isn't append with a new line, it looks like this:
[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0[root@localhost ~]#
This is because in mptcp_seq_show(), if mptcp isn't in use, net->mib.mptcp_statistics is NULL,
so it just puts all 0 after "MPTcpExt:", and return, forgot the '\n'.
After this patch:
[root@localhost ~]# cat /proc/net/netstat
...
MPTcpExt: 0 0 0 0 0 0 0 0 0 0 0 0 0
[root@localhost ~]#
Fixes: fc518953bc ("mptcp: add and use MIB counter infrastructure")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/142e2fd9-58d9-bb13-fb75-951cccc2331e@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.
The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.
The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.
Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
ip link set dev bridge type bridge mcast_snooping 1 < deadlock >
A typical call trace looks like the following:
[ 936.251495] _raw_spin_lock+0x5c/0x68
[ 936.255221] br_multicast_add_group+0x40/0x170 [bridge]
[ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge]
[ 936.265322] br_dev_xmit+0x140/0x368 [bridge]
[ 936.269689] dev_hard_start_xmit+0x94/0x158
[ 936.273876] __dev_queue_xmit+0x5ac/0x7f8
[ 936.277890] dev_queue_xmit+0x10/0x18
[ 936.281563] neigh_resolve_output+0xec/0x198
[ 936.285845] ip6_finish_output2+0x240/0x710
[ 936.290039] __ip6_finish_output+0x130/0x170
[ 936.294318] ip6_output+0x6c/0x1c8
[ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8
[ 936.301834] igmp6_send+0x358/0x558
[ 936.305326] igmp6_join_group.part.0+0x30/0xf0
[ 936.309774] igmp6_group_added+0xfc/0x110
[ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290
[ 936.317885] ipv6_dev_mc_inc+0x10/0x18
[ 936.321677] br_multicast_open+0xbc/0x110 [bridge]
[ 936.326506] br_multicast_toggle+0xec/0x140 [bridge]
Fixes: 4effd28c12 ("bridge: join all-snoopers multicast address")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
migrate_disable() is just a wrapper for preempt_disable() in
non-RT kernel. It is safe to replace it, and RT kernel will
benefit.
Note that it is introduced since Feb 2020.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201205075946.497763-2-xiyou.wangcong@gmail.com
The per-cpu bpf_redirect_info is shared among all skb_do_redirect()
and BPF redirect helpers. Callers on RX path are all in BH context,
disabling preemption is not sufficient to prevent BH interruption.
In production, we observed strange packet drops because of the race
condition between LWT xmit and TC ingress, and we verified this issue
is fixed after we disable BH.
Although this bug was technically introduced from the beginning, that
is commit 3a0af8fd61 ("bpf: BPF for lightweight tunnel infrastructure"),
at that time call_rcu() had to be call_rcu_bh() to match the RCU context.
So this patch may not work well before RCU flavor consolidation has been
completed around v5.0.
Update the comments above the code too, as call_rcu() is now BH friendly.
Signed-off-by: Dongdong Wang <wangdongdong.6@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20201205075946.497763-1-xiyou.wangcong@gmail.com
Increment the mgmt revision due to the recently added new commands.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When suspending, mark SUSPEND_SCAN_ENABLE and SUSPEND_SCAN_DISABLE tasks
correctly when either classic or le scanning is modified.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For advertising, we wish to know the LE tx power capabilities of the
controller in userspace, so this patch edits the Security Info MGMT
command to be more generic, such that other various controller
capabilities can be included in the EIR data. This change also includes
the LE min and max tx power into this newly-named command.
The change was tested by manually verifying that the MGMT command
returns the tx power range as expected in userspace.
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Queries tx power via HCI_LE_Read_Transmit_Power command when the hci
device is initialized, and stores resulting min/max LE power in hdev
struct. If command isn't available (< BT5 support), min/max values
both default to HCI_TX_POWER_INVALID.
This patch is manually verified by ensuring BT5 devices correctly query
and receive controller tx power range.
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch takes the min/max intervals and tx power optionally provided
in mgmt interface, stores them in the advertisement struct, and uses
them when configuring the hci requests. While tx power is not used if
extended advertising is unavailable, software rotation will use the min
and max advertising intervals specified by the client.
This change is validated manually by ensuring the min/max intervals are
propagated to the controller on both hatch (extended advertising) and
kukui (no extended advertising) chromebooks, and that tx power is
propagated correctly on hatch. These tests are performed with multiple
advertisements simultaneously.
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds support for the new advertising add interface, with the
first command setting advertising parameters and the second to set
advertising data. The set parameters command allows the caller to leave
some fields "unset", with a params bitfield defining which params were
purposefully set. Unset parameters will be given defaults when calling
hci_add_adv_instance. The data passed to the param mgmt command is
allowed to be flexible, so in the future if bluetoothd passes a larger
structure with new params, the mgmt command will ignore the unknown
members at the end.
This change has been validated on both hatch (extended advertising) and
kukui (no extended advertising) chromebooks running bluetoothd that
support this new interface. I ran the following manual tests:
- Set several (3) advertisements using modified test_advertisement.py
- For each, validate correct data and parameters in btmon trace
- Verified both for software rotation and extended adv
Automatic test suite also run, testing many (25) scenarios of single and
multi-advertising for data/parameter correctness.
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We wish to handle advertising data separately from advertising
parameters in our new MGMT requests. This change adds a helper that
allows the advertising data and scan response to be updated for an
existing advertising instance.
Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch add a configurable parameter to switch off the interleave
scan feature.
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactor read default system configuration function so that it's capable
of returning different types than u16
Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds code to handle the active scan during interleave
scan. The interleave scan will be canceled when users start active scan,
and it will be restarted after active scan stopped.
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds code to handle the system suspension during interleave
scan. The interleave scan will be canceled when the system is going to
sleep, and will be restarted after waking up.
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch implements the interleaving between allowlist scan and
no-filter scan. It'll be used to save power when at least one monitor is
registered and at least one pending connection or one device to be
scanned for.
The durations of the allowlist scan and the no-filter scan are
controlled by MGMT command: Set Default System Configuration. The
default values are set randomly for now.
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During controller initialization, an LE Set RPA Timeout command is sent
to the controller if supported. However, the value checked to determine
if the command is supported is incorrect. Page 1921 of the Bluetooth
Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands
field corresponds to the LE Set RPA Timeout command, but currently
bit 6 of octet 35 is checked. This patch checks the correct value
instead.
This issue led to the error seen in the following btmon output during
initialization of an adapter (rtl8761b) and prevented initialization
from completing.
< HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2
Timeout: 900 seconds
> HCI Event: Command Complete (0x0e) plen 4
LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2
Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a)
= Close Index: 00:E0:4C:6B:E5:03
The error did not appear when running with this patch.
Signed-off-by: Edward Vear <edwardvear@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This renames get_adv_instance_scan_rsp to adv_instance_is_scannable and
make it return a bool since it was not actually properly return the size
of the scan response as one could expect.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Current code is actually failing on the following tests of mgmt-tester
because get_adv_instance_scan_rsp_len did not account for flags that
cause scan response data to be included resulting in non-scannable
instance when in fact it should be scannable.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This test case is meant to verify that multiple
unknown options is included in the response.
BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part A
page 1057
'On an unknown option failure (Result=0x0003),
the option(s) that contain anoption type field that is not
understood by the recipient of the L2CAP_CONFIGURATION_REQ
packet shall be included in the L2CAP_CONFIGURATION_RSP
packet unless they are hints.'
Before this patch:
> ACL Data RX: Handle 11 flags 0x02 dlen 24
L2CAP: Configure Request (0x04) ident 18 len 16
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [mandatory]
10 00 11 02 11 00 12 02 12 00
< ACL Data TX: Handle 11 flags 0x00 dlen 17
L2CAP: Configure Response (0x05) ident 18 len 9
Source CID: 64
Flags: 0x0000
Result: Failure - unknown options (0x0003)
Option: Unknown (0x10) [mandatory]
12
After this patch:
> ACL Data RX: Handle 11 flags 0x02 dlen 24
L2CAP: Configure Request (0x04) ident 5 len 16
Destination CID: 64
Flags: 0x0000
Option: Unknown (0x10) [mandatory]
10 00 11 02 11 00 12 02 12 00
< ACL Data TX: Handle 11 flags 0x00 dlen 23
L2CAP: Configure Response (0x05) ident 5 len 15
Source CID: 64
Flags: 0x0000
Result: Failure - unknown options (0x0003)
Option: Unknown (0x10) [mandatory]
10 11 01 11 12 01 12
Signed-off-by: Jimmy Wahlberg <jimmywa@spotify.com>
Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Guillaume noticed that: for segments udp_queue_rcv_one_skb() returns the
proto, and it should pass "ret" unmodified to ip_protocol_deliver_rcu().
Otherwize, with a negtive value passed, it will underflow inet_protos.
This can be reproduced with IPIP FOU:
# ip fou add port 5555 ipproto 4
# ethtool -K eth1 rx-gro-list on
Fixes: cf329aa42b ("udp: cope with UDP GRO packet misdirection")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- bump version strings, by Simon Wunderlich
- update include for min/max helpers, by Sven Eckelmann
- add infrastructure and netlink functions for routing algo selection,
by Sven Eckelmann (2 patches)
- drop deprecated debugfs and sysfs support and obsoleted
functionality, by Sven Eckelmann (3 patches)
- drop unused include in fragmentation.c, by Simon Wunderlich
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAl/KWIkWHHN3QHNpbW9u
d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoTrTEACUImdOCWv4+NnEQfChQv6Y3i18
gJABXoOkWLfFpGBUlw/uYzFKpMEWZ0orHig9gucC+rmjNc8veWwAOugJoTPTKQJZ
/4yndhM0x39vWex03rdDmyqzCEh1V1Q9VcdEuD6XbJDaK5F4jDu3NQVneOijIkN+
5PzhlvtUlfe8csykOCOoC9Y5wy82fEhcEvuSq+Z6dU3Cb3EGHtEUtZ4orDkpnnml
7XEcn5C5+OFGlz/ikiszKumTtNK+dmGluOxoyfAzEjQHK7PoTorcXFS2YUoSWeqQ
gmYZ56RBqEHjo4eqcaEgcqq5v8cTPCEMCB8UQjAffxrhloRKHRhQOysG1+OnzGA8
IQ2ARHLQCVPVraXF2ixE0D3BvjKmtMmcvZOCXwhCHDajn9jFKAh0+hnInDyv6Fp1
7eUfpHACL9EQDxKWXeQg37X2mk3hHJ+4zgZOYidahVeKbiiexe2heaHTYAbr9rIf
8hvtlgMg4AnwL3IxadrKwsbJ5t7TEPLTInf47hPvpRg7SmthDTcgso4VDwmWgB8W
Tlug8/NoXXDCmDhXUpvyi9+idHe0J8xvHl/2xGC7aSsPAbuhqOuefMKr36YhXJTY
vBA5Ih5ppylJ8Dzwa0TbonvQbOAinA8YTa6izKxY4e+xTPB2jz/WT2vciEZv2+ig
vNIPFrLZ7OFMohCDfQ==
=tNKF
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- update include for min/max helpers, by Sven Eckelmann
- add infrastructure and netlink functions for routing algo selection,
by Sven Eckelmann (2 patches)
- drop deprecated debugfs and sysfs support and obsoleted
functionality, by Sven Eckelmann (3 patches)
- drop unused include in fragmentation.c, by Simon Wunderlich
* tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop unused soft-interface.h include in fragmentation.c
batman-adv: Drop legacy code for auto deleting mesh interfaces
batman-adv: Drop deprecated debugfs support
batman-adv: Drop deprecated sysfs support
batman-adv: Allow selection of routing algorithm over rtnetlink
batman-adv: Prepare infrastructure for newlink settings
batman-adv: Add new include for min/max helpers
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
implement the NCI 2.x initial sequence to support NCI 2.x NFCC.
Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed.
If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work.
In NCI 1.0, Initial sequence and payloads are as below:
(DH) (NFCC)
| -- CORE_RESET_CMD --> |
| <-- CORE_RESET_RSP -- |
| -- CORE_INIT_CMD --> |
| <-- CORE_INIT_RSP -- |
CORE_RESET_RSP payloads are Status, NCI version, Configuration Status.
CORE_INIT_CMD payloads are empty.
CORE_INIT_RSP payloads are Status, NFCC Features,
Number of Supported RF Interfaces, Supported RF Interface,
Max Logical Connections, Max Routing table Size,
Max Control Packet Payload Size, Max Size for Large Parameters,
Manufacturer ID, Manufacturer Specific Information.
In NCI 2.0, Initial Sequence and Parameters are as below:
(DH) (NFCC)
| -- CORE_RESET_CMD --> |
| <-- CORE_RESET_RSP -- |
| <-- CORE_RESET_NTF -- |
| -- CORE_INIT_CMD --> |
| <-- CORE_INIT_RSP -- |
CORE_RESET_RSP payloads are Status.
CORE_RESET_NTF payloads are Reset Trigger,
Configuration Status, NCI Version, Manufacturer ID,
Manufacturer Specific Information Length,
Manufacturer Specific Information.
CORE_INIT_CMD payloads are Feature1, Feature2.
CORE_INIT_RSP payloads are Status, NFCC Features,
Max Logical Connections, Max Routing Table Size,
Max Control Packet Payload Size,
Max Data Packet Payload Size of the Static HCI Connection,
Number of Credits of the Static HCI Connection,
Max NFC-V RF Frame Size, Number of Supported RF Interfaces,
Supported RF Interfaces.
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20201202223147.3472-1-bongsu.jeon@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We add the support to remove a specific node down with 128bit
node identifier, as an alternative to legacy 32-bit node address.
example:
$tipc peer remove identiy <1001002|16777777>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20201203035045.4564-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Changing 'return start' to 'return action_start' can fix this bug.
Fixes: 69929d4c49 ("net: openvswitch: fix TTL decrement action netlink message format")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20201204114314.1596-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: f8ed289fab ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/1607071737-33875-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: d15662682d ("ipv4: Allow ipv6 gateway with ipv4 routes")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1607071695-33740-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
with the following tdc testcase:
83be: (qdisc, fq_pie) Create FQ-PIE with invalid number of flows
as fq_pie_init() fails, fq_pie_destroy() is called to clean up. Since the
timer is not yet initialized, it's possible to observe a splat like this:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 975 Comm: tc Not tainted 5.10.0-rc4+ #298
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x99/0xcb
register_lock_class+0x12dd/0x1750
__lock_acquire+0xfe/0x3970
lock_acquire+0x1c8/0x7f0
del_timer_sync+0x49/0xd0
fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
qdisc_create+0x916/0x1160
tc_modify_qdisc+0x3c4/0x1630
rtnetlink_rcv_msg+0x346/0x8e0
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[...]
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
WARNING: CPU: 0 PID: 975 at lib/debugobjects.c:508 debug_print_object+0x162/0x210
[...]
Call Trace:
debug_object_assert_init+0x268/0x380
try_to_del_timer_sync+0x6a/0x100
del_timer_sync+0x9e/0xd0
fq_pie_destroy+0x3f/0x80 [sch_fq_pie]
qdisc_create+0x916/0x1160
tc_modify_qdisc+0x3c4/0x1630
rtnetlink_rcv_msg+0x346/0x8e0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
fix it moving timer_setup() before any failure, like it was done on 'red'
with former commit 608b4adab1 ("net_sched: initialize timer earlier in
red_init()").
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/2e78e01c504c633ebdff18d041833cf2e079a3a4.1607020450.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zapping pages is required only if we are calling vm_insert_page into a
region where pages had previously been mapped. Receive zerocopy allows
reusing such regions, and hitherto called zap_page_range() before
calling vm_insert_page() in that range.
zap_page_range() can also be triggered from userspace with
madvise(MADV_DONTNEED). If userspace is configured to call this before
reusing a segment, or if there was nothing mapped at this virtual
address to begin with, we can avoid calling zap_page_range() under the
socket lock. That said, if userspace does not do that, then we are
still responsible for calling zap_page_range().
This patch adds a flag that the user can use to hint to the kernel
that a zap is not required. If the flag is not set, or if an older
user application does not have a flags field at all, then the kernel
calls zap_page_range as before. Also, if the flag is set but a zap is
still required, the kernel performs that zap as necessary. Thus
incorrectly indicating that a zap can be avoided does not change the
correctness of operation. It also increases the batchsize for
vm_insert_pages and prefetches the page struct for the batch since
we're about to bump the refcount.
An alternative mechanism could be to not have a flag, assume by
default a zap is not needed, and fall back to zapping if needed.
However, this would harm performance for older applications for which
a zap is necessary, and thus we implement it with an explicit flag
so newer applications can opt in.
When using RPC-style traffic with medium sized (tens of KB) RPCs, this
change yields an efficency improvement of about 30% for QPS/CPU usage.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set zerocopy hint, event when falling back to copy, so that the
pending data can be efficiently received using zerocopy when
possible.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sometimes, we may call tcp receive zerocopy when inq is 0,
or inq < PAGE_SIZE, or inq is generally small enough that
it is cheaper to copy rather than remap pages.
In these cases, we may want to either return early (inq=0) or
attempt to use the provided copy buffer to simply copy
the received data.
This allows us to save both system call overhead and
the latency of acquiring mmap_sem in read mode for cases where
it would be useless to do so.
This patchset enables this behaviour by:
1. Returning quickly if inq is 0.
2. Attempting to perform a regular copy if a hybrid copybuffer is
provided and it is large enough to absorb all available bytes.
3. Return quickly if no such buffer was provided and there are less
than PAGE_SIZE bytes available.
For small RPC ping-pong workloads, normally we would have
1 getsockopt(), 1 recvmsg() and 1 sendmsg() call per RPC. With this
change, we remove the recvmsg() call entirely, reducing the syscall
overhead by about 33%. In testing with small (hundreds of bytes)
RPC traffic, this yields a syscall reduction of about 33% and
an efficiency gain of about 3-5% when defined as QPS/CPU Util.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sometimes, we may call tcp receive zerocopy when inq is 0,
or inq < PAGE_SIZE, in which case we cannot remap pages. In this case,
simply return the appropriate hint for regular copying without taking
mmap_sem.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor frag-is-remappable test for tcp receive zerocopy. This is
part of a patch set that introduces short-circuited hybrid copies
for small receive operations, which results in roughly 33% fewer
syscalls for small RPC scenarios.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor skb frag fast-forwarding for tcp receive zerocopy. This is
part of a patch set that introduces short-circuited hybrid copies
for small receive operations, which results in roughly 33% fewer
syscalls for small RPC scenarios.
skb_advance_to_frag(), given a skb and an offset into the skb,
iterates from the first frag for the skb until we're at the frag
specified by the offset. Assuming the offset provided refers to how
many bytes in the skb are already read, the returned frag points to
the next frag we may read from, while offset_frag is set to the number
of bytes from this frag that we have already read.
If frag is not null and offset_frag is equal to 0, then we may be able
to map this frag's page into the process address space with
vm_insert_page(). However, if offset_frag is not equal to 0, then we
cannot do so.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor tcp_recvmsg() by splitting it into locked and unlocked
portions. Callers already holding the socket lock and not using
ERRQUEUE/cmsg/busy polling can simply call tcp_recvmsg_locked().
This is in preparation for a short-circuit copy performed by
TCP receive zerocopy for small (< PAGE_SIZE, or otherwise requested
by the user) reads.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP receive zerocopy does not successfully map the entire
requested space, it outputs a 'hint' that the caller should recvmsg().
Augment zerocopy to accept a user buffer that it tries to copy this
hint into - if it is possible to copy the entire hint, it will do so.
This elides a recvmsg() call for received traffic that isn't exactly
page-aligned in size.
This was tested with RPC-style traffic of arbitrary sizes. Normally,
each received message required at least one getsockopt() call, and one
recvmsg() call for the remaining unaligned data.
With this change, almost all of the recvmsg() calls are eliminated,
leading to a savings of about 25%-50% in number of system calls
for RPC-style workloads.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Iterators are currently used to expose kernel information to userspace
over fast procfs-like files but iterators could also be used to
manipulate local storage. For example, the task_file iterator could be
used to initialize a socket local storage with associations between
processes and sockets or to selectively delete local storage values.
Signed-off-by: Florent Revest <revest@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20201204113609.1850150-3-revest@google.com
Currently, the sock_from_file prototype takes an "err" pointer that is
either not set or set to -ENOTSOCK IFF the returned socket is NULL. This
makes the error redundant and it is ignored by a few callers.
This patch simplifies the API by letting callers deduce the error based
on whether the returned socket is NULL or not.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Florent Revest <revest@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20201204113609.1850150-1-revest@google.com
SRv6 End.DT6 is defined in the SRv6 Network Programming [1].
The Linux kernel already offers an implementation of the SRv6
End.DT6 behavior which permits IPv6 L3 VPNs over SRv6 networks. This
implementation is not particularly suitable in contexts where we need to
deploy IPv6 L3 VPNs among different tenants which share the same network
address schemes. The underlying problem lies in the fact that the
current version of DT6 (called legacy DT6 from now on) needs a complex
configuration to be applied on routers which requires ad-hoc routes and
routing policy rules to ensure the correct isolation of tenants.
Consequently, a new implementation of DT6 has been introduced with the
aim of simplifying the construction of IPv6 L3 VPN services in the
multi-tenant environment using SRv6 networks. To accomplish this task,
we reused the same VRF infrastructure and SRv6 core components already
exploited for implementing the SRv6 End.DT4 behavior.
Currently the two End.DT6 implementations coexist seamlessly and can be
used depending on the context and the user preferences. So, in order to
support both versions of DT6 a new attribute (vrftable) has been
introduced which allows us to differentiate the implementation of the
behavior to be used.
A SRv6 End.DT6 legacy behavior is still instantiated using a command
like the following one:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 table 100 dev eth0
While to instantiate the SRv6 End.DT6 in VRF mode, the command is still
pretty straight forward:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 vrftable 100 dev eth0.
Obviously as in the case of SRv6 End.DT4, the VRF strict_mode parameter
must be set (net.vrf.strict_mode=1) and the VRF associated with table
100 must exist.
Please note that the instances of SRv6 End.DT6 legacy and End.DT6 VRF
mode can coexist in the same system/configuration without problems.
[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SRv6 End.DT4 is defined in the SRv6 Network Programming [1].
The SRv6 End.DT4 is used to implement IPv4 L3VPN use-cases in
multi-tenants environments. It decapsulates the received packets and it
performs IPv4 routing lookup in the routing table of the tenant.
The SRv6 End.DT4 Linux implementation leverages a VRF device in order to
force the routing lookup into the associated routing table.
To make the End.DT4 work properly, it must be guaranteed that the routing
table used for routing lookup operations is bound to one and only one
VRF during the tunnel creation. Such constraint has to be enforced by
enabling the VRF strict_mode sysctl parameter, i.e:
$ sysctl -wq net.vrf.strict_mode=1.
At JANOG44, LINE corporation presented their multi-tenant DC architecture
using SRv6 [2]. In the slides, they reported that the Linux kernel is
missing the support of SRv6 End.DT4 behavior.
The SRv6 End.DT4 behavior can be instantiated using a command similar to
the following:
$ ip route add 2001:db8::1 encap seg6local action End.DT4 vrftable 100 dev eth0
We introduce the "vrftable" extension in iproute2 in a following patch.
[1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming
[2] https://speakerdeck.com/line_developers/line-data-center-networking-with-srv6
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We introduce two callbacks used for customizing the creation/destruction of
a SRv6 behavior. Such callbacks are defined in the new struct
seg6_local_lwtunnel_ops and hereafter we provide a brief description of
them:
- build_state(...): used for calling the custom constructor of the
behavior during its initialization phase and after all the attributes
have been parsed successfully;
- destroy_state(...): used for calling the custom destructor of the
behavior before it is completely destroyed.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, each SRv6 behavior specifies a set of required
attributes that must be provided by the userspace application when such
behavior is going to be instantiated. If at least one of the required
attributes is not provided, the creation of the behavior fails.
The SRv6 behavior framework lacks a way to manage optional attributes.
By definition, an optional attribute for a SRv6 behavior consists of an
attribute which may or may not be provided by the userspace. Therefore,
if an optional attribute is missing (and thus not supplied by the user)
the creation of the behavior goes ahead without any issue.
This patch explicitly differentiates the required attributes from the
optional attributes. In particular, each behavior can declare a set of
required attributes and a set of optional ones.
The semantic of the required attributes remains *totally* unaffected by
this patch. The introduction of the optional attributes does NOT impact
on the backward compatibility of the existing SRv6 behaviors.
It is essential to note that if an (optional or required) attribute is
supplied to a SRv6 behavior which does not expect it, the behavior
simply discards such attribute without generating any error or warning.
This operating mode remained unchanged both before and after the
introduction of the optional attributes extension.
The optional attributes are one of the key components used to implement
the SRv6 End.DT6 behavior based on the Virtual Routing and Forwarding
(VRF) framework. The optional attributes make possible the coexistence
of the already existing SRv6 End.DT6 implementation with the new SRv6
End.DT6 VRF-based implementation without breaking any backward
compatibility. Further details on the SRv6 End.DT6 behavior (VRF mode)
are reported in subsequent patches.
From the userspace point of view, the support for optional attributes DO
NOT require any changes to the userspace applications, i.e: iproute2
unless new attributes (required or optional) are needed.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Depending on the attribute (i.e.: SEG6_LOCAL_SRH, SEG6_LOCAL_TABLE, etc),
the parse() callback performs some validity checks on the provided input
and updates the tunnel state (slwt) with the result of the parsing
operation. However, an attribute may also need to reserve some additional
resources (i.e.: memory or setting up an eBPF program) in the parse()
callback to complete the parsing operation.
The parse() callbacks are invoked by the parse_nla_action() for each
attribute belonging to a specific behavior. Given a behavior with N
attributes, if the parsing of the i-th attribute fails, the
parse_nla_action() returns immediately with an error. Nonetheless, the
resources acquired during the parsing of the i-1 attributes are not freed
by the parse_nla_action().
Attributes which acquire resources must release them *in an explicit way*
in both the seg6_local_{build/destroy}_state(). However, adding a new
attribute of this type requires changes to
seg6_local_{build/destroy}_state() to release the resources correctly.
The seg6local infrastructure still lacks a simple and structured way to
release the resources acquired in the parse() operations.
We introduced a new callback in the struct seg6_action_param named
destroy(). This callback releases any resource which may have been acquired
in the parse() counterpart. Each attribute may or may not implement the
destroy() callback depending on whether it needs to free some acquired
resources.
The destroy() callback comes with several of advantages:
1) we can have many attributes as we want for a given behavior with no
need to explicitly free the taken resources;
2) As in case of the seg6_local_build_state(), the
seg6_local_destroy_state() does not need to handle the release of
resources directly. Indeed, it calls the destroy_attrs() function which
is in charge of calling the destroy() callback for every set attribute.
We do not need to patch seg6_local_{build/destroy}_state() anymore as
we add new attributes;
3) the code is more readable and better structured. Indeed, all the
information needed to handle a given attribute are contained in only
one place;
4) it facilitates the integration with new features introduced in further
patches.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJfyTQyAAoJEG4XJFUm622bCdcIAIyVnqdW7pnoDmWIyQmAEnD9
vGARkzghPHXnufpOzohyDdxT12X9klhrxSVIgzEgH1/pl3i1PpnF6KXyGFCC44Lw
wrLXhQygPzmIW1IZtJJE3G72WExXoRjWx6LD1I7C7oEIduqFixXADmK2tKzFp795
Jxum+sOeT6+Dk1OvO/fIroBHX73mRE9zAuiTIMpt2G1j8uXs9QVfcTbTrUshLASN
0sX9J6JutltBuM4G7+bFpVzKnLnlQ7ebUaF6nvTCQsgHWZwkS7yAubSWX9sFohbR
UXgQHNE83s/esOg7nBxAfqTKP8mbxsobmxZtxE5GR5vFY5FJDxqP9Zc2KzPp39w=
=CbX/
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.11
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
* tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits)
wl1251: remove trailing semicolon in macro definition
airo: remove trailing semicolon in macro definition
wilc1000: added queue support for WMM
wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
wilc1000: added 'ndo_set_mac_address' callback support
brcmfmac: expose firmware config files through modinfo
wlcore: Switch to using the new API kobj_to_dev()
rtw88: coex: add feature to enhance HID coexistence performance
rtw88: coex: upgrade coexistence A2DP mechanism
rtw88: coex: add action for coexistence in hardware initial
rtw88: coex: add function to avoid cck lock
rtw88: coex: change the coexistence mechanism for WLAN connected
rtw88: coex: change the coexistence mechanism for HID
rtw88: coex: update AFH information while in free-run mode
rtw88: coex: update the mechanism for A2DP + PAN
rtw88: coex: add debug message
rtw88: coex: run coexistence when WLAN entering/leaving LPS
Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices"
...
====================
Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If force_zc is set, we should exit out with an error, not fall back to
copy mode.
Fixes: 921b68692a ("xsk: Enable sharing of dma mappings")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1607077277-41995-1-git-send-email-zhangchangzhong@huawei.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During restarrt, mac80211 is supposed to reconfigure the driver.
When there's a monitor interface, the interface is added and the
channel context for it was created, but not assigned to it as it
was not considered running during the restart.
Fix this by setting SDATA_STATE_RUNNING while adding monitor
interfaces.
Signed-off-by: Borwankar, Antara <antara.borwankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.e1df99693a4c.I494579f28018c2d0b9d4083a664cf872c28405ae@changeid
[reword commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_chandef_he_6ghz_oper() needs to return true if it
determined a value 6 GHz chandef, fix that.
Fixes: 1d00ce807e ("mac80211: support S1G association")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1606121152-3452-1-git-send-email-wgong@codeaurora.org
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit 992b03b88e ("batman-adv: Don't always reallocate the
fragmentation skb head") removed the last user of functions from
soft-interface.h.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The only way to automatically drop batadv mesh interfaces when all soft
interfaces were removed was dropped with the sysfs support. It is no longer
needed to have them handled by kernel anymore.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The debugfs support in batman-adv was marked as deprecated by the commit
00caf6a2b3 ("batman-adv: Mark debugfs functionality as deprecated") and
scheduled for removal in 2021.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The sysfs in batman-adv support was marked as deprecated by the commit
42cdd52148 ("batman-adv: ABI: Mark sysfs files as deprecated") and
scheduled for removal in 2021.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
A batadv net_device is associated to a B.A.T.M.A.N. routing algorithm. This
algorithm has to be selected before the interface is initialized and cannot
be changed after that. The only way to select this algorithm was a module
parameter which specifies the default algorithm used during the creation of
the net_device.
This module parameter is writeable over
/sys/module/batman_adv/parameters/routing_algo and thus allows switching of
the routing algorithm:
1. change routing_algo parameter
2. create new batadv net_device
But this is not race free because another process can be scheduled between
1 + 2 and in that time frame change the routing_algo parameter again.
It is much cleaner to directly provide this information inside the
rtnetlink's RTM_NEWLINK message. The two processes would be (in regards of
the creation parameter of their batadv interfaces) be isolated. This also
eases the integration of batadv devices inside tools like network-manager
or systemd-networkd which are not expecting to operate on /sys before a new
net_device is created.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv generic netlink family can be used to retrieve the current state
and set various configuration settings. But there are also settings which
must be set before the actual interface is created.
The rtnetlink already uses IFLA_INFO_DATA to allow net_device families to
transfer such configurations. The minimal required functionality for this
is now available for the batadv rtnl_link_ops. Also a new IFLA class of
attributes will be attached to it because rtnetlink only allows 51
different attributes but batadv_nl_attrs already contains 62 attributes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The commit b296a6d533 ("kernel.h: split out min()/max() et al. helpers")
moved the min/max helper functionality from kernel.h to minmax.h. Adjust
the kernel code accordingly to avoid fragile indirect includes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Remove a permeating assumption thoughout BPF verifier of vmlinux BTF. Instead,
wherever BTF type IDs are involved, also track the instance of struct btf that
goes along with the type ID. This allows to gradually add support for kernel
module BTFs and using/tracking module types across BPF helper calls and
registers.
This patch also renames btf_id() function to btf_obj_id() to minimize naming
clash with using btf_id to denote BTF *type* ID, rather than BTF *object*'s ID.
Also, altough btf_vmlinux can't get destructed and thus doesn't need
refcounting, module BTFs need that, so apply BTF refcounting universally when
BPF program is using BTF-powered attachment (tp_btf, fentry/fexit, etc). This
makes for simpler clean up code.
Now that BTF type ID is not enough to uniquely identify a BTF type, extend BPF
trampoline key to include BTF object ID. To differentiate that from target
program BPF ID, set 31st bit of type ID. BTF type IDs (at least currently) are
not allowed to take full 32 bits, so there is no danger of confusing that bit
with a valid BTF type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-10-andrii@kernel.org
Adds a new bpf_setsockopt for TCP sockets, TCP_BPF_WINDOW_CLAMP,
which sets the maximum receiver window size. It will be useful for
limiting receiver window based on RTT.
Signed-off-by: Prankur gupta <prankgup@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201202213152.435886-2-prankgup@fb.com
RFC 8684 says:
If the token is unknown or the host wants to refuse subflow establishment
(for example, due to a limit on the number of subflows it will permit),
the receiver will send back a reset (RST) signal, analogous to an unknown
port in TCP, containing an MP_TCPRST option (Section 3.6) with an
"MPTCP specific error" reason code.
mptcp-next doesn't support MP_TCPRST yet, this can be added in another
change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Multipath-TCP standard (RFC 8684) says that an MPTCP host should send
a TCP reset if the token in a MP_JOIN request is unknown.
At this time we don't do this, the 3whs completes and the 'new subflow'
is reset afterwards. There are two ways to allow MPTCP to send the
reset.
1. override 'send_synack' callback and emit the rst from there.
The drawback is that the request socket gets inserted into the
listeners queue just to get removed again right away.
2. Send the reset from the 'route_req' function instead.
This avoids the 'add&remove request socket', but route_req lacks the
skb that is required to send the TCP reset.
Instead of just adding the skb to that function for MPTCP sake alone,
Paolo suggested to merge init_req and route_req functions.
This saves one indirection from syn processing path and provides the skb
to the merged function at the same time.
'send reset on unknown mptcp join token' is added in next patch.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when 'act_mpls' is used to mangle the LSE, the current value is read from
the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is
contained in the skb "linear" area.
Found by code inspection.
v2:
- use MPLS_HLEN instead of sizeof(new_lse), thanks to Jakub Kicinski
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/3243506cba43d14858f3bd21ee0994160e44d64a.1606987058.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when openvswitch is configured to mangle the LSE, the current value is
read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that
the label is contained in the skb "linear" area.
Found by code inspection.
Fixes: d27cf5c59a ("net: core: add MPLS update core helper and use in OvS")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/aa099f245d93218b84b5c056b67b6058ccf81a66.1606987185.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_mpls_dec_ttl() reads the LSE without ensuring that it is contained in
the skb "linear" area. Fix this calling pskb_may_pull() before reading the
current ttl.
Found by code inspection.
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/53659f28be8bc336c113b5254dc637cc76bbae91.1606987074.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not use rlimit-based memory accounting for xskmap maps.
It has been replaced with the memcg-based memory accounting.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-31-guro@fb.com
Do not use rlimit-based memory accounting for sockmap and sockhash maps.
It has been replaced with the memcg-based memory accounting.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-29-guro@fb.com
Include internal metadata into the memcg-based memory accounting.
Also include the memory allocated on updating an element.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-17-guro@fb.com
The .x25_addr[] address comes from the user and is not necessarily
NUL terminated. This leads to a couple problems. The first problem is
that the strlen() in x25_bind() can read beyond the end of the buffer.
The second problem is more subtle and could result in memory corruption.
The call tree is:
x25_connect()
--> x25_write_internal()
--> x25_addr_aton()
The .x25_addr[] buffers are copied to the "addresses" buffer from
x25_write_internal() so it will lead to stack corruption.
Verify that the strings are NUL terminated and return -EINVAL if they
are not.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: a9288525d2 ("X25: Dont let x25_bind use addresses containing characters")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify the tx writeable condition from the queue is not full to the
number of present tx queues is less than the half of the total number
of queues. Because the tx queue not full is a very short time, this will
cause a large number of EPOLLOUT events, and cause a large number of
process wake up.
Fixes: 35fcde7f8d ("xsk: support for Tx")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/508fef55188d4e1160747ead64c6dcda36735880.1606555939.git.xuanzhuo@linux.alibaba.com
datagram_poll will judge the current socket status (EPOLLIN, EPOLLOUT)
based on the traditional socket information (eg: sk_wmem_alloc), but
this does not apply to xsk. So this patch uses sock_poll_wait instead of
datagram_poll, and the mask is calculated by xsk_poll.
Fixes: c497176cb2 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/e82f4697438cd63edbf271ebe1918db8261b7c09.1606555939.git.xuanzhuo@linux.alibaba.com
I have to now lock/unlock socket for the bind hook execution.
That shouldn't cause any overhead because the socket is unbound
and shouldn't receive any traffic.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20201202172516.3483656-3-sdf@google.com
If a packet is ready in receive queue, and application isssues
a recvmsg()/recvfrom()/recvmmsg() request asking for zero bytes,
we hang in mptcp_recvmsg().
Fixes: ea4ca586b1 ("mptcp: refine MPTCP-level ack scheduling")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20201202171657.1185108-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:
skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:109!
Call Trace:
skb_push+0x10/0x10
ip6gre_header+0x47/0x1b0
neigh_connected_output+0xae/0xf0
ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.
Fixes: eb95f52fc7 ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'snprintf' returns the number of characters which would have been written
if enough space had been available, excluding the terminating null byte.
Thus, the return value of 'sizeof(buf)' means that the last character
has been dropped.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Fixes: 2f34b8bfae ("SUNRPC: add links for all client xprts to debugfs")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
While we always want to align to the next page and/or the beginning of
the tail buffer when we call xdr_set_next_page(), the functions
xdr_align_data() and xdr_expand_hole() really want to align to the next
object in that next page or tail.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
rpc_prepare_reply_pages() currently expects the 'hdrsize' argument to
contain the length of the data that we expect to want placed in the head
kvec plus a count of 1 word of padding that is placed after the page data.
This is very confusing when trying to read the code, and sometimes leads
to callers adding an arbitrary value of '1' just in order to satisfy the
requirement (whether or not the page data actually needs such padding).
This patch aims to clarify the code by changing the 'hdrsize' argument
to remove that 1 word of padding. This means we need to subtract the
padding from all the existing callers.
Fixes: 02ef04e432 ("NFS: Account for XDR pad of buf->pages")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up xdr_read_pages() so that it can handle object lengths that are
larger than the page length, by simply aligning to the next object in
the buffer tail.
The function will continue to return the length of the truncate object
data that actually fit into the pages.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Allow xdr_set_iov() to set a base so that we can use it to set the
cursor to a specific position in the kvec buffer.
If the new base overflows the kvec/pages buffer in either xdr_set_iov()
or xdr_set_page_base(), then truncate it so that we point to the end of
the buffer.
Finally, change both function to return the number of bytes remaining to
read in their buffers.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We already know that the head buffer and page are empty, so if there is
any data, it is in the tail.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After we've looked up the transport module, we need to ensure it can't
go away until we've finished running the transport setup code.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
According to RFC5666, the correct netid for an IPv6 addressed RDMA
transport is "rdma6", which we've supported as a mount option since
Linux-4.7. The problem is when we try to load the module "xprtrdma6",
that will fail, since there is no modulealias of that name.
Fixes: 181342c5eb ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently, we wake up the tasks by priority queue ordering, which means
that we ignore the batching that is supposed to help with QoS issues.
Fixes: c049f8ea9a ("SUNRPC: Remove the bh-safe lock requirement on the rpc_wait_queue->lock")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There's no need to defer allocation of pages for the receive buffer.
- This upcall is quite infrequent
- gssp_alloc_receive_pages() can allocate the pages with GFP_KERNEL,
unlike the transport
- gssp_alloc_receive_pages() knows exactly how many pages are needed
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Introduce get link command which loops through
all available links of all available link groups. It
uses the SMC-R linkgroup list as entry point, not
the socket list, which makes linkgroup diagnosis
possible, in case linkgroup does not contain active
connections anymore.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce get linkgroup command which loops through
all available SMCR linkgroups. It uses the SMC-R linkgroup
list as entry point, not the socket list, which makes
linkgroup diagnosis possible, in case linkgroup does not
contain active connections anymore.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new netlink command to obtain system information
of the smc module.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Encapsulate the smc ism v2 capability boolean value
in a function for better information hiding.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During link creation add net-device ifindex and ib-device
name to link structure. This is needed for diagnostic purposes.
When diagnostic information is gathered, we need to traverse
device, linkgroup and link structures, to be able to do that
we need to hold a spinlock for the linkgroup list, without this
diagnostic information in link structure, another device list
mutex holding would be necessary to dereference the device
pointer in the link structure which would be impossible when
holding a spinlock already.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During smc ib-device creation, add network device ifindex to smc
ib-device structure. Register for netdevice changes and update ib-device
accordingly. This is needed for diagnostic purposes.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add link counters to the structure of the smc ib device, one counter per
ib port. Increase/decrease the counters as needed in the corresponding
routines.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add connection counters to the structure of the link.
Increase/decrease the counters as needed in the corresponding
routines.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use active link of the connection directly and not
via linkgroup array structure when obtaining link
data of the connection.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The helper smc_connect_abort() can be used by the listen processing
functions, too. And rename this helper to smc_conn_abort() to make the
purpose clearer.
No functional change.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent changes made to remove AES constants started using protocol
aware salt_size. ctx->prot_info's salt_size is filled in tls sw case,
but not in tls offload mode, and was working so far because of the
hard coded value was used.
Fixes: 6942a284fb ("net/tls: make inline helpers protocol-aware")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Link: https://lore.kernel.org/r/20201201090752.27355-1-rohitm@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into rdma.git for-next
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The last user of the RTNL brother of dev_getfirstbyhwtype (the latter
being synchronized under RCU) has been deleted in commit b4db2b35fc
("afs: Use core kernel UUID generation").
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201129200550.2433401-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix Return: kernel-doc notation in all net/tipc/ source files.
Also keep ReST list notation intact for output formatting.
Fix a few typos in comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix socket.c kernel-doc warnings in preparation for adding to the
networking docbook.
Also, for rcvbuf_limit(), use bullet notation so that the lines do
not run together.
../net/tipc/socket.c:130: warning: Function parameter or member 'cong_links' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'probe_unacked' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'snd_win' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'peer_caps' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'rcv_win' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'group' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'oneway' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'nagle_start' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'snd_backlog' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'msg_acc' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'pkt_cnt' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'expect_ack' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'nodelay' not described in 'tipc_sock'
../net/tipc/socket.c:130: warning: Function parameter or member 'group_is_open' not described in 'tipc_sock'
../net/tipc/socket.c:267: warning: Function parameter or member 'sk' not described in 'tsk_advance_rx_queue'
../net/tipc/socket.c:295: warning: Function parameter or member 'sk' not described in 'tsk_rej_rx_queue'
../net/tipc/socket.c:295: warning: Function parameter or member 'error' not described in 'tsk_rej_rx_queue'
../net/tipc/socket.c:894: warning: Function parameter or member 'tsk' not described in 'tipc_send_group_msg'
../net/tipc/socket.c:1187: warning: Function parameter or member 'net' not described in 'tipc_sk_mcast_rcv'
../net/tipc/socket.c:1323: warning: Function parameter or member 'inputq' not described in 'tipc_sk_conn_proto_rcv'
../net/tipc/socket.c:1323: warning: Function parameter or member 'xmitq' not described in 'tipc_sk_conn_proto_rcv'
../net/tipc/socket.c:1885: warning: Function parameter or member 'sock' not described in 'tipc_recvmsg'
../net/tipc/socket.c:1993: warning: Function parameter or member 'sock' not described in 'tipc_recvstream'
../net/tipc/socket.c:2313: warning: Function parameter or member 'xmitq' not described in 'tipc_sk_filter_rcv'
../net/tipc/socket.c:2404: warning: Function parameter or member 'xmitq' not described in 'tipc_sk_enqueue'
../net/tipc/socket.c:2456: warning: Function parameter or member 'net' not described in 'tipc_sk_rcv'
../net/tipc/socket.c:2693: warning: Function parameter or member 'kern' not described in 'tipc_accept'
../net/tipc/socket.c:3816: warning: Excess function parameter 'sysctl_tipc_sk_filter' description in 'tipc_sk_filtering'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix node.c kernel-doc warnings in preparation for adding to the
networking docbook.
../net/tipc/node.c:141: warning: Function parameter or member 'kref' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'bc_entry' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'failover_sent' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'peer_id' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'peer_id_string' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'conn_sks' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'keepalive_intv' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'timer' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'peer_net' not described in 'tipc_node'
../net/tipc/node.c:141: warning: Function parameter or member 'peer_hash_mix' not described in 'tipc_node'
../net/tipc/node.c:273: warning: Function parameter or member '__n' not described in 'tipc_node_crypto_rx'
../net/tipc/node.c:822: warning: Function parameter or member 'n' not described in '__tipc_node_link_up'
../net/tipc/node.c:822: warning: Function parameter or member 'bearer_id' not described in '__tipc_node_link_up'
../net/tipc/node.c:822: warning: Function parameter or member 'xmitq' not described in '__tipc_node_link_up'
../net/tipc/node.c:888: warning: Function parameter or member 'n' not described in 'tipc_node_link_up'
../net/tipc/node.c:888: warning: Function parameter or member 'bearer_id' not described in 'tipc_node_link_up'
../net/tipc/node.c:888: warning: Function parameter or member 'xmitq' not described in 'tipc_node_link_up'
../net/tipc/node.c:948: warning: Function parameter or member 'n' not described in '__tipc_node_link_down'
../net/tipc/node.c:948: warning: Function parameter or member 'bearer_id' not described in '__tipc_node_link_down'
../net/tipc/node.c:948: warning: Function parameter or member 'xmitq' not described in '__tipc_node_link_down'
../net/tipc/node.c:948: warning: Function parameter or member 'maddr' not described in '__tipc_node_link_down'
../net/tipc/node.c:1537: warning: Function parameter or member 'net' not described in 'tipc_node_get_linkname'
../net/tipc/node.c:1537: warning: Function parameter or member 'len' not described in 'tipc_node_get_linkname'
../net/tipc/node.c:1891: warning: Function parameter or member 'n' not described in 'tipc_node_check_state'
../net/tipc/node.c:1891: warning: Function parameter or member 'xmitq' not described in 'tipc_node_check_state'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix name_table.c kernel-doc warnings in preparation for adding to the
networking docbook.
../net/tipc/name_table.c:115: warning: Function parameter or member 'start' not described in 'service_range_foreach_match'
../net/tipc/name_table.c:115: warning: Function parameter or member 'end' not described in 'service_range_foreach_match'
../net/tipc/name_table.c:127: warning: Function parameter or member 'start' not described in 'service_range_match_first'
../net/tipc/name_table.c:127: warning: Function parameter or member 'end' not described in 'service_range_match_first'
../net/tipc/name_table.c:176: warning: Function parameter or member 'start' not described in 'service_range_match_next'
../net/tipc/name_table.c:176: warning: Function parameter or member 'end' not described in 'service_range_match_next'
../net/tipc/name_table.c:225: warning: Function parameter or member 'type' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'lower' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'upper' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'scope' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'node' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'port' not described in 'tipc_publ_create'
../net/tipc/name_table.c:225: warning: Function parameter or member 'key' not described in 'tipc_publ_create'
../net/tipc/name_table.c:252: warning: Function parameter or member 'type' not described in 'tipc_service_create'
../net/tipc/name_table.c:252: warning: Function parameter or member 'hd' not described in 'tipc_service_create'
../net/tipc/name_table.c:367: warning: Function parameter or member 'sr' not described in 'tipc_service_remove_publ'
../net/tipc/name_table.c:367: warning: Function parameter or member 'node' not described in 'tipc_service_remove_publ'
../net/tipc/name_table.c:367: warning: Function parameter or member 'key' not described in 'tipc_service_remove_publ'
../net/tipc/name_table.c:383: warning: Function parameter or member 'pa' not described in 'publication_after'
../net/tipc/name_table.c:383: warning: Function parameter or member 'pb' not described in 'publication_after'
../net/tipc/name_table.c:401: warning: Function parameter or member 'service' not described in 'tipc_service_subscribe'
../net/tipc/name_table.c:401: warning: Function parameter or member 'sub' not described in 'tipc_service_subscribe'
../net/tipc/name_table.c:546: warning: Function parameter or member 'net' not described in 'tipc_nametbl_translate'
../net/tipc/name_table.c:546: warning: Function parameter or member 'type' not described in 'tipc_nametbl_translate'
../net/tipc/name_table.c:546: warning: Function parameter or member 'instance' not described in 'tipc_nametbl_translate'
../net/tipc/name_table.c:546: warning: Function parameter or member 'dnode' not described in 'tipc_nametbl_translate'
../net/tipc/name_table.c:762: warning: Function parameter or member 'net' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:762: warning: Function parameter or member 'type' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:762: warning: Function parameter or member 'lower' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:762: warning: Function parameter or member 'upper' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:762: warning: Function parameter or member 'key' not described in 'tipc_nametbl_withdraw'
../net/tipc/name_table.c:796: warning: Function parameter or member 'sub' not described in 'tipc_nametbl_subscribe'
../net/tipc/name_table.c:826: warning: Function parameter or member 'sub' not described in 'tipc_nametbl_unsubscribe'
../net/tipc/name_table.c:876: warning: Function parameter or member 'net' not described in 'tipc_service_delete'
../net/tipc/name_table.c:876: warning: Function parameter or member 'sc' not described in 'tipc_service_delete'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix name_distr.c kernel-doc warnings in preparation for adding to the
networking docbook.
../net/tipc/name_distr.c:55: warning: Function parameter or member 'i' not described in 'publ_to_item'
../net/tipc/name_distr.c:55: warning: Function parameter or member 'p' not described in 'publ_to_item'
../net/tipc/name_distr.c:70: warning: Function parameter or member 'net' not described in 'named_prepare_buf'
../net/tipc/name_distr.c:70: warning: Function parameter or member 'type' not described in 'named_prepare_buf'
../net/tipc/name_distr.c:70: warning: Function parameter or member 'size' not described in 'named_prepare_buf'
../net/tipc/name_distr.c:70: warning: Function parameter or member 'dest' not described in 'named_prepare_buf'
../net/tipc/name_distr.c:88: warning: Function parameter or member 'net' not described in 'tipc_named_publish'
../net/tipc/name_distr.c:88: warning: Function parameter or member 'publ' not described in 'tipc_named_publish'
../net/tipc/name_distr.c:116: warning: Function parameter or member 'net' not described in 'tipc_named_withdraw'
../net/tipc/name_distr.c:116: warning: Function parameter or member 'publ' not described in 'tipc_named_withdraw'
../net/tipc/name_distr.c:147: warning: Function parameter or member 'net' not described in 'named_distribute'
../net/tipc/name_distr.c:147: warning: Function parameter or member 'seqno' not described in 'named_distribute'
../net/tipc/name_distr.c:199: warning: Function parameter or member 'net' not described in 'tipc_named_node_up'
../net/tipc/name_distr.c:199: warning: Function parameter or member 'dnode' not described in 'tipc_named_node_up'
../net/tipc/name_distr.c:199: warning: Function parameter or member 'capabilities' not described in 'tipc_named_node_up'
../net/tipc/name_distr.c:225: warning: Function parameter or member 'net' not described in 'tipc_publ_purge'
../net/tipc/name_distr.c:225: warning: Function parameter or member 'publ' not described in 'tipc_publ_purge'
../net/tipc/name_distr.c:225: warning: Function parameter or member 'addr' not described in 'tipc_publ_purge'
../net/tipc/name_distr.c:272: warning: Function parameter or member 'net' not described in 'tipc_update_nametbl'
../net/tipc/name_distr.c:272: warning: Function parameter or member 'i' not described in 'tipc_update_nametbl'
../net/tipc/name_distr.c:272: warning: Function parameter or member 'node' not described in 'tipc_update_nametbl'
../net/tipc/name_distr.c:272: warning: Function parameter or member 'dtype' not described in 'tipc_update_nametbl'
../net/tipc/name_distr.c:353: warning: Function parameter or member 'net' not described in 'tipc_named_rcv'
../net/tipc/name_distr.c:353: warning: Function parameter or member 'namedq' not described in 'tipc_named_rcv'
../net/tipc/name_distr.c:353: warning: Function parameter or member 'rcv_nxt' not described in 'tipc_named_rcv'
../net/tipc/name_distr.c:353: warning: Function parameter or member 'open' not described in 'tipc_named_rcv'
../net/tipc/name_distr.c:383: warning: Function parameter or member 'net' not described in 'tipc_named_reinit'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix link.c kernel-doc warnings in preparation for adding to the
networking docbook.
../net/tipc/link.c:200: warning: Function parameter or member 'session' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'snd_nxt_state' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'rcv_nxt_state' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'in_session' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'active' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'if_name' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'rst_cnt' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'drop_point' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'failover_reasm_skb' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'failover_deferdq' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'transmq' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'backlog' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'snd_nxt' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'rcv_unacked' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'deferdq' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'window' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'min_win' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'ssthresh' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'max_win' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'cong_acks' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'checkpoint' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'reasm_tnlmsg' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'last_gap' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'last_ga' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'bc_rcvlink' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'bc_sndlink' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'nack_state' not described in 'tipc_link'
../net/tipc/link.c:200: warning: Function parameter or member 'bc_peer_is_up' not described in 'tipc_link'
../net/tipc/link.c:473: warning: Function parameter or member 'self' not described in 'tipc_link_create'
../net/tipc/link.c:473: warning: Function parameter or member 'peer_id' not described in 'tipc_link_create'
../net/tipc/link.c:473: warning: Excess function parameter 'ownnode' description in 'tipc_link_create'
../net/tipc/link.c:544: warning: Function parameter or member 'ownnode' not described in 'tipc_link_bc_create'
../net/tipc/link.c:544: warning: Function parameter or member 'peer' not described in 'tipc_link_bc_create'
../net/tipc/link.c:544: warning: Function parameter or member 'peer_id' not described in 'tipc_link_bc_create'
../net/tipc/link.c:544: warning: Function parameter or member 'peer_caps' not described in 'tipc_link_bc_create'
../net/tipc/link.c:544: warning: Function parameter or member 'bc_sndlink' not described in 'tipc_link_bc_create'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix kernel-doc warnings in bearer.c:
../net/tipc/bearer.c:77: warning: Function parameter or member 'name' not described in 'tipc_media_find'
../net/tipc/bearer.c:91: warning: Function parameter or member 'type' not described in 'media_find_id'
../net/tipc/bearer.c:105: warning: Function parameter or member 'buf' not described in 'tipc_media_addr_printf'
../net/tipc/bearer.c:105: warning: Function parameter or member 'len' not described in 'tipc_media_addr_printf'
../net/tipc/bearer.c:105: warning: Function parameter or member 'a' not described in 'tipc_media_addr_printf'
../net/tipc/bearer.c:174: warning: Function parameter or member 'net' not described in 'tipc_bearer_find'
../net/tipc/bearer.c:174: warning: Function parameter or member 'name' not described in 'tipc_bearer_find'
../net/tipc/bearer.c:238: warning: Function parameter or member 'net' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:238: warning: Function parameter or member 'name' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:238: warning: Function parameter or member 'disc_domain' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:238: warning: Function parameter or member 'prio' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:238: warning: Function parameter or member 'attr' not described in 'tipc_enable_bearer'
../net/tipc/bearer.c:350: warning: Function parameter or member 'net' not described in 'tipc_reset_bearer'
../net/tipc/bearer.c:350: warning: Function parameter or member 'b' not described in 'tipc_reset_bearer'
../net/tipc/bearer.c:374: warning: Function parameter or member 'net' not described in 'bearer_disable'
../net/tipc/bearer.c:374: warning: Function parameter or member 'b' not described in 'bearer_disable'
../net/tipc/bearer.c:462: warning: Function parameter or member 'net' not described in 'tipc_l2_send_msg'
../net/tipc/bearer.c:479: warning: Function parameter or member 'net' not described in 'tipc_l2_send_msg'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel-doc and Sphinx fixes to eliminate lots of warnings
in preparation for adding to the networking docbook.
../net/tipc/crypto.c:57: warning: cannot understand function prototype: 'enum '
../net/tipc/crypto.c:69: warning: cannot understand function prototype: 'enum '
../net/tipc/crypto.c:130: warning: Function parameter or member 'tfm' not described in 'tipc_tfm'
../net/tipc/crypto.c:130: warning: Function parameter or member 'list' not described in 'tipc_tfm'
../net/tipc/crypto.c:172: warning: Function parameter or member 'stat' not described in 'tipc_crypto_stats'
../net/tipc/crypto.c:232: warning: Function parameter or member 'flags' not described in 'tipc_crypto'
../net/tipc/crypto.c:329: warning: Function parameter or member 'ukey' not described in 'tipc_aead_key_validate'
../net/tipc/crypto.c:329: warning: Function parameter or member 'info' not described in 'tipc_aead_key_validate'
../net/tipc/crypto.c:482: warning: Function parameter or member 'aead' not described in 'tipc_aead_tfm_next'
../net/tipc/trace.c:43: warning: cannot understand function prototype: 'unsigned long sysctl_tipc_sk_filter[5] __read_mostly = '
Documentation/networking/tipc:57: ../net/tipc/msg.c:584: WARNING: Unexpected indentation.
Documentation/networking/tipc:63: ../net/tipc/name_table.c:536: WARNING: Unexpected indentation.
Documentation/networking/tipc:63: ../net/tipc/name_table.c:537: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/networking/tipc:78: ../net/tipc/socket.c:3809: WARNING: Unexpected indentation.
Documentation/networking/tipc:78: ../net/tipc/socket.c:3807: WARNING: Inline strong start-string without end-string.
Documentation/networking/tipc:72: ../net/tipc/node.c:904: WARNING: Unexpected indentation.
Documentation/networking/tipc:39: ../net/tipc/crypto.c:97: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/networking/tipc:39: ../net/tipc/crypto.c:98: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/networking/tipc:39: ../net/tipc/crypto.c:141: WARNING: Inline strong start-string without end-string.
../net/tipc/discover.c:82: warning: Function parameter or member 'skb' not described in 'tipc_disc_init_msg'
../net/tipc/msg.c:69: warning: Function parameter or member 'gfp' not described in 'tipc_buf_acquire'
../net/tipc/msg.c:382: warning: Function parameter or member 'offset' not described in 'tipc_msg_build'
../net/tipc/msg.c:708: warning: Function parameter or member 'net' not described in 'tipc_msg_lookup_dest'
../net/tipc/subscr.c:65: warning: Function parameter or member 'seq' not described in 'tipc_sub_check_overlap'
../net/tipc/subscr.c:65: warning: Function parameter or member 'found_lower' not described in 'tipc_sub_check_overlap'
../net/tipc/subscr.c:65: warning: Function parameter or member 'found_upper' not described in 'tipc_sub_check_overlap'
../net/tipc/udp_media.c:75: warning: Function parameter or member 'proto' not described in 'udp_media_addr'
../net/tipc/udp_media.c:75: warning: Function parameter or member 'port' not described in 'udp_media_addr'
../net/tipc/udp_media.c:75: warning: Function parameter or member 'ipv4' not described in 'udp_media_addr'
../net/tipc/udp_media.c:75: warning: Function parameter or member 'ipv6' not described in 'udp_media_addr'
../net/tipc/udp_media.c:98: warning: Function parameter or member 'rcast' not described in 'udp_bearer'
Also fixed a typo of "duest" to "dest".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix tipc header files for adding to the networking docbook.
Remove some uses of "/**" that were not kernel-doc notation.
Fix some source formatting to eliminate Sphinx warnings.
Add missing struct member and function argument kernel-doc descriptions.
Correct the description of a couple of struct members that were
marked as "(FIXME)".
Documentation/networking/tipc:18: ../net/tipc/name_table.h:65: WARNING: Unexpected indentation.
Documentation/networking/tipc:18: ../net/tipc/name_table.h:66: WARNING: Block quote ends without a blank line; unexpected unindent.
../net/tipc/bearer.h:128: warning: Function parameter or member 'min_win' not described in 'tipc_media'
../net/tipc/bearer.h:128: warning: Function parameter or member 'max_win' not described in 'tipc_media'
../net/tipc/bearer.h:171: warning: Function parameter or member 'min_win' not described in 'tipc_bearer'
../net/tipc/bearer.h:171: warning: Function parameter or member 'max_win' not described in 'tipc_bearer'
../net/tipc/bearer.h:171: warning: Function parameter or member 'disc' not described in 'tipc_bearer'
../net/tipc/bearer.h:171: warning: Function parameter or member 'up' not described in 'tipc_bearer'
../net/tipc/bearer.h:171: warning: Function parameter or member 'refcnt' not described in 'tipc_bearer'
../net/tipc/name_distr.h:68: warning: Function parameter or member 'port' not described in 'distr_item'
../net/tipc/name_table.h:111: warning: Function parameter or member 'services' not described in 'name_table'
../net/tipc/name_table.h:111: warning: Function parameter or member 'cluster_scope_lock' not described in 'name_table'
../net/tipc/name_table.h:111: warning: Function parameter or member 'rc_dests' not described in 'name_table'
../net/tipc/name_table.h:111: warning: Function parameter or member 'snd_nxt' not described in 'name_table'
../net/tipc/subscr.h:67: warning: Function parameter or member 'kref' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'net' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'service_list' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'conid' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'inactive' not described in 'tipc_subscription'
../net/tipc/subscr.h:67: warning: Function parameter or member 'lock' not described in 'tipc_subscription'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 682cd3cf94
("tipc: confgiure and apply UDP bearer MTU on running links"), we
introduced a function to change UDP bearer MTU and applied this new value
across existing per-link. However, we did not apply this new MTU value at
node level. This lead to packet dropped at link level if its size is
greater than new MTU value.
To fix this issue, we also apply this new MTU value for node level.
Fixes: 682cd3cf94 ("tipc: confgiure and apply UDP bearer MTU on running links")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20201130025544.3602-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers that support bridge offload need to be notified about changes to
the bridge's VLAN protocol so that they could react accordingly and
potentially veto the change.
Add a new switchdev attribute to communicate the change to drivers.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For IPV6_2292PKTOPTIONS, do_ipv6_getsockopt() stores the user pointer
optval in the msg_control field of the msghdr.
Hence, sparse rightfully warns at ./net/ipv6/ipv6_sockglue.c:1151:33:
warning: incorrect type in assignment (different address spaces)
expected void *msg_control
got char [noderef] __user *optval
Since commit 1f466e1f15 ("net: cleanly handle kernel vs user buffers for
->msg_control"), user pointers shall be stored in the msg_control_user
field, and kernel pointers in the msg_control field. This allows to
propagate __user annotations nicely through this struct.
Store optval in msg_control_user to properly record and propagate the
memory space annotation of this pointer.
Note that msg_control_is_user is set to true, so the key invariant, i.e.,
use msg_control_user if and only if msg_control_is_user is true, holds.
The msghdr is further used in the six alternative put_cmsg() calls, with
msg_control_is_user being true, put_cmsg() picks msg_control_user
preserving the __user annotation and passes that properly to
copy_to_user().
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20201127093421.21673-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turns out that usage of skb extensions can cause memory leaks. Ido
Schimmel reported: "[...] there are instances that blindly overwrite
'skb->extensions' by invoking skb_copy_header() after __alloc_skb()."
Therefore, give up on using skb extensions for KCOV handle, and instead
directly store kcov_handle in sk_buff.
Fixes: 6370cc3bbd ("net: add kcov handle to skb extensions")
Fixes: 85ce50d337 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET")
Fixes: 97f53a08cb ("net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handling")
Link: https://lore.kernel.org/linux-wireless/20201121160941.GA485907@shredder.lan/
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20201125224840.2014773-1-elver@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Functions tfilter_notify_chain() and tcf_get_next_proto() are always called
with rtnl lock held in current implementation. Moreover, attempting to call
them without rtnl lock would cause a warning down the call chain in
function __tcf_get_next_proto() that requires the lock to be held by
callers. Remove the 'rtnl_held' argument in order to simplify the code and
make rtnl lock requirement explicit.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20201127151205.23492-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
True to the message of commit v5.10-rc1-105-g46d6c5ae953c, _do_
actually make use of state->sk when possible, such as in the REJECT
modules.
Reported-by: Minqiang Chen <ptpt52@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch removes nfnl_acct_list from struct net to reduce the default
memory footprint for the netns structure.
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Here we could use the '!=' expression to fix the following coccicheck
warning:
./net/netfilter/xt_nfacct.c:30:41-46: WARNING: conversion to bool not needed here
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We have some tasks triggered by the subflow receive path
which require to access the msk socket status, specifically:
mptcp_clean_una() and mptcp_push_pending()
We have almost everything in place to defer to the msk
release_cb such tasks when the msk sock is owned.
Since the worker is no more used to clean the acked data,
for fallback sockets we need to explicitly flush them.
As an added bonus we can move the wake-up code in __mptcp_clean_una(),
simplify a lot mptcp_poll() and move the timer update under
the data lock.
The worker is now used only to process and send DATA_FIN
packets and do the mptcp-level retransmissions.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extending the data_lock scope in mptcp_incoming_option
we can use that to protect both snd_una and wnd_end.
In the typical case, we will have a single atomic op instead of 2
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the TX skbs allocation in mptcp_sendmsg() scope,
and tentatively pre-allocate a skbs number proportional
to the sendmsg() length.
Use the ssk tx skb cache to prevent the subflow allocation.
This allows removing the msk skb extension cache and will
make possible the later patches.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Such spinlock is currently used only to protect the 'owned'
flag inside the socket lock itself. With this patch, we extend
its scope to protect the whole msk receive path and
sk_forward_memory.
Given the above, we can always move data into the msk receive
queue (and OoO queue) from the subflow.
We leverage the previous commit, so that we need to acquire the
spinlock in the tx path only when moving fwd memory.
recvmsg() must now explicitly acquire the socket spinlock
when moving skbs out of sk_receive_queue. To reduce the number of
lock operations required we use a second rx queue and splice the
first into the latter in mptcp_lock_sock(). Additionally rmem
allocated memory is bulk-freed via release_cb()
Acked-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This leverages the previous commit to reserve the wmem
required for the sendmsg() operation when the msk socket
lock is first acquired.
Some heuristics are used to get a reasonable [over] estimation of
the whole memory required. If we can't forward alloc such amount
fallback to a reasonable small chunk, otherwise enter the wait
for memory path.
When sendmsg() needs more memory it looks at wmem_reserved
first and if that is exhausted, move more space from
sk_forward_alloc.
The reserved memory is not persistent and is released at the
next socket unlock via the release_cb().
Overall this will simplify the next patch.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows invoking an additional callback under the
socket spin lock.
Will be used by the next patches to avoid additional
spin lock contention.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add napi_id to the xdp_rxq_info structure, and make sure the XDP
socket pick up the napi_id in the Rx path. The napi_id is used to find
the corresponding NAPI structure for socket busy polling.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
Wire-up XDP socket busy-poll support for recvmsg() and sendmsg(). If
the XDP socket prefers busy-polling, make sure that no wakeup/IPI is
performed.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-6-bjorn.topel@gmail.com
Add a check for need wake up in sendmsg(), so that if a user calls
sendmsg() when no wakeup is needed, do not trigger a wakeup.
To simplify the need wakeup check in the syscall, unconditionally
enable the need wakeup flag for Tx. This has a side-effect for poll();
If poll() is called for a socket without enabled need wakeup, a Tx
wakeup is unconditionally performed.
The wakeup matrix for AF_XDP now looks like:
need wakeup | poll() | sendmsg() | recvmsg()
------------+--------------+-------------+------------
disabled | wake Tx | wake Tx | nop
enabled | check flag; | check flag; | check flag;
| wake Tx/Rx | wake Tx | wake Rx
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-5-bjorn.topel@gmail.com
Add support for non-blocking recvmsg() to XDP sockets. Previously,
only sendmsg() was supported by XDP socket. Now, for symmetry and the
upcoming busy-polling support, recvmsg() is added.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201130185205.196029-4-bjorn.topel@gmail.com
This option lets a user set a per socket NAPI budget for
busy-polling. If the options is not set, it will use the default of 8.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20201130185205.196029-3-bjorn.topel@gmail.com
The existing busy-polling mode, enabled by the SO_BUSY_POLL socket
option or system-wide using the /proc/sys/net/core/busy_read knob, is
an opportunistic. That means that if the NAPI context is not
scheduled, it will poll it. If, after busy-polling, the budget is
exceeded the busy-polling logic will schedule the NAPI onto the
regular softirq handling.
One implication of the behavior above is that a busy/heavy loaded NAPI
context will never enter/allow for busy-polling. Some applications
prefer that most NAPI processing would be done by busy-polling.
This series adds a new socket option, SO_PREFER_BUSY_POLL, that works
in concert with the napi_defer_hard_irqs and gro_flush_timeout
knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were
introduced in commit 6f8b12d661 ("net: napi: add hard irqs deferral
feature"), and allows for a user to defer interrupts to be enabled and
instead schedule the NAPI context from a watchdog timer. When a user
enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled,
and the NAPI context is being processed by a softirq, the softirq NAPI
processing will exit early to allow the busy-polling to be performed.
If the application stops performing busy-polling via a system call,
the watchdog timer defined by gro_flush_timeout will timeout, and
regular softirq handling will resume.
In summary; Heavy traffic applications that prefer busy-polling over
softirq processing should use this option.
Example usage:
$ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs
$ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout
Note that the timeout should be larger than the userspace processing
window, otherwise the watchdog will timeout and fall back to regular
softirq processing.
Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20201130185205.196029-2-bjorn.topel@gmail.com
It turns out that it does exist a path where xdp_return_buff() is
being passed an XDP buffer of type MEM_TYPE_XSK_BUFF_POOL. This path
is when AF_XDP zero-copy mode is enabled, and a buffer is redirected
to a DEVMAP with an attached XDP program that drops the buffer.
This change simply puts the handling of MEM_TYPE_XSK_BUFF_POOL back
into xdp_return_buff().
Fixes: 82c41671ca ("xdp: Simplify xdp_return_{frame, frame_rx_napi, buff}")
Reported-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/bpf/20201127171726.123627-1-bjorn.topel@gmail.com
Convert the READ_BUF macro in nfs4xdr.c from open code to instead
use the new xdr_stream-style decoders already in use by the encode
side (and by the in-kernel NFS client implementation). Once this
conversion is done, each individual NFSv4 argument decoder can be
independently cleaned up to replace these macros with C code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A "permanent" struct xdr_stream is allocated in struct svc_rqst so
that it is usable by all server-side decoders. A per-rqst scratch
buffer is also allocated to handle decoding XDR data items that
cross page boundaries.
To demonstrate how it will be used, add the first call site for the
new svcxdr_init_decode() API.
As an additional part of the overall conversion, add symbolic
constants for successful and failed XDR operations. Returning "0" is
overloaded. Sometimes it means something failed, but sometimes it
means success. To make it more clear when XDR decoding functions
succeed or fail, introduce symbolic constants.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit c509f15a58 ("SUNRPC: Split the xdr_buf event class") added
display of the rqst's XID to the svc_xdr_buf_class. However, when
the recvfrom tracepoint fires, rq_xid has yet to be filled in with
the current XID. So it ends up recording the previous XID that was
handled by that svc_rqst.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
An efficient way to handle multiple Read chunks is to post them all
together and then take a single completion. This is also how the
code is already structured: when the Read completion fires, all
portions of the incoming RPC message are available to be assembled.
The difficult problem is setting up the Read sink buffers so that
the server pulls the client's data into place, making subsequent
pull-up unnecessary. There are several cases:
* No Read chunks. No-op.
* One data item Read chunk. This is the fast case, where the inline
part of the RPC-over-RDMA message becomes the head and tail, and
the data item chunk is placed in buf->pages.
* A Position-zero Read chunk. Treated like TCP: the Read chunk is
pulled into contiguous pages.
+ A Position-zero Read chunk with data item chunks. Treated like
TCP: all of the Read chunks are pulled into contiguous pages.
+ Multiple data item chunks. Treated like TCP: the inline part is
copied and the data item chunks are pulled into contiguous pages.
The "*" cases are already supported. This patch adds support for the
"+" cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As a pre-requisite for handling multiple Read chunks in each Read
list, convert svc_rdma_recv_read_chunk() to use the new parsed Read
chunk list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I'm about to change the purpose of ri_chunklen: Instead of tracking
the number of bytes in one Read chunk, it will track the total
number of bytes in the Read list. Rename it for clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We already have trace_svcrdma_decode_rseg(), which records each
ingress Read segment. Instead of reporting those again when they
are about to be posted as RDMA Reads, let's fire one tracepoint
before posting each type of chunk.
So we'll get:
nfsd-1998 [002] 321.666615: svcrdma_decode_rseg: cq.id=4 cid=42 segno=0 position=0 192@0x013ca9ebfae14000:0xb0010b05
nfsd-1998 [002] 321.666615: svcrdma_decode_rseg: cq.id=4 cid=42 segno=1 position=0 7688@0x013ca9ebf914e000:0xb0010a05
nfsd-1998 [002] 321.666615: svcrdma_decode_rseg: cq.id=4 cid=42 segno=2 position=0 28@0x013ca9ebfae15000:0xb0010905
nfsd-1998 [002] 321.666622: svcrdma_decode_rqst: cq.id=4 cid=42 xid=0x013ca9eb vers=1 credits=128 proc=RDMA_NOMSG hdrlen=100
nfsd-1998 [002] 321.666642: svcrdma_post_read_chunk: cq.id=3 cid=112 sqecount=3
kworker/2:1H-221 [002] 321.673949: svcrdma_wc_read: cq.id=3 cid=112 status=SUCCESS (0/0x0)
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor svc_rdma_send_reply_chunk() so that it Sends only the parts
of rq_res that do not contain a result payload.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: svc_rdma_map_reply_msg() is restructured to DMA map only
the parts of rq_res that do not contain a result payload.
This change has been tested to confirm that it does not cause a
regression in the no Write chunk and single Write chunk cases.
Multiple Write chunks have not been tested.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When counting the number of SGEs needed to construct a Send request,
do not count result payloads. And, when copying the Reply message
into the pull-up buffer, result payloads are not to be copied to the
Send buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Instead of re-parsing the ingress RPC Call transport
header when constructing the egress RPC Reply transport header, use
the new parsed Write list and Reply chunk, which are version-
agnostic and already XDR decoded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Instead of re-parsing the ingress RPC Call transport
header when constructing RDMA Writes, use the new parsed chunk lists
for the Write list and Reply chunk, which are version-agnostic and
already XDR-decoded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Don't duplicate header decoding smarts here. Instead, use
the new parsed chunk lists.
Note that the XID sanity test is also removed. The XID is already
looked up by the cb handler, and is rejected if it's not recognized.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This simple data structure binds the location of each data payload
inside of an RPC message to the chunk that will be used to push it
to or pull it from the client.
There are several benefits to this small additional overhead:
* It enables support for more than one chunk in incoming Read and
Write lists.
* It translates the version-specific on-the-wire format into a
generic in-memory structure, enabling support for multiple
versions of the RPC/RDMA transport protocol.
* It enables the server to re-organize a chunk list if it needs to
adjust where Read chunk data lands in server memory without
altering the contents of the XDR-encoded Receive buffer.
Construction of these lists is done while sanity checking each
incoming RPC/RDMA header. Subsequent patches will make use of the
generated data structures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The only RPC/RDMA ordering requirement between RDMA Writes and RDMA
Sends is that the responder must post the Writes on the Send queue
before posting the Send that conveys the RPC Reply for that Write
payload.
The Linux NFS server implementation now has a transport method that
can post result Payload Writes earlier than svc_rdma_sendto:
->xpo_result_payload()
This gets RDMA Writes going earlier so they are more likely to be
complete at the remote end before the Send completes.
Some care must be taken with pulled-up Replies. We don't want to
push the Write chunk and then send the same payload data via Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Have the NFSD encoders annotate the boundaries of every
direct-data-placement eligible result data payload. Then change
svcrdma to use that annotation instead of the xdr->page_len
when handling Write chunks.
For NFSv4 on RDMA, that enables the ability to recognize multiple
result payloads per compound. This is a pre-requisite for supporting
multiple Write chunks per RPC transaction.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: "result payload" is a less confusing name for these
payloads. "READ payload" reflects only the NFS usage.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor for subsequent changes.
Constify the xdr_buf argument to ensure the code here does not
modify it, and to enable callers to pass in a
"const struct xdr_buf *".
At the same time, rename the helper functions, which emit RDMA
Writes, not RDMA Sends, and add documenting comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: Ensure the code in rw.c does not modify the argument, and
enable callers to also use "const struct xdr_buf *".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When space in the Reply chunk runs out in the middle of a segment,
we end up passing a zero-length SGL to rdma_rw_ctx_init(), and it
oopses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
by syzbot.
2) Remove spurious reports on nf_tables when lockdep gets disabled,
from Florian Westphal.
3) Fix memleak in the error path of error path of
ip_vs_control_net_init(), from Wang Hai.
4) Fix missing control data in flow dissector, otherwise IP address
matching in hardware offload infra does not work.
5) Fix hardware offload match on prefix IP address when userspace
does not send a bitwise expression to represent the prefix.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables_offload: build mask based from the matching bytes
netfilter: nftables_offload: set address type in control dissector
ipvs: fix possible memory leak in ip_vs_control_net_init
netfilter: nf_tables: avoid false-postive lockdep splat
netfilter: ipset: prevent uninit-value in hash_ip6_add
====================
Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.
As a result, "ip route get" can return a different route than what
would be used when sending real packets.
For example:
$ ip route add 192.0.2.11/32 dev eth0
$ ip route add unreachable 192.0.2.11/32 tos 2
$ ip route get 192.0.2.11 tos 2
RTNETLINK answers: No route to host
But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:
$ ping -c 1 -Q 2 192.0.2.11
PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms
--- 192.0.2.11 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms
This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.
Fixes: 3765d35ed8 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-11-28
1) Do not reference the skb for xsk's generic TX side since when looped
back into RX it might crash in generic XDP, from Björn Töpel.
2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
from Magnus Karlsson.
3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
from Marek Majtyka.
4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
from Zhen Lei.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add MAINTAINERS entry for BPF LSM
bpftool: Fix error return value in build_btf_type_table
net, xsk: Avoid taking multiple skbuff references
xsk: Fix incorrect netdev reference count
xsk: Fix umem cleanup bug at socket destruct
MAINTAINERS: Update XDP and AF_XDP entries
====================
Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)
-----BEGIN PGP SIGNATURE-----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=mORx
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge:
batman-adv: Don't always reallocate the fragmentation skb head
batman-adv: Reserve needed_*room for fragments
batman-adv: Consider fragmentation for needed_headroom
====================
Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
