Convert omap_vout to the vb2 framework. After this change
'v4l2-compliance -s' passes all tests.
As usual, this vb2 conversion is a 'big bang' patch and hard to read.
Tested on a Pandaboard and a Beagle XM board.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch fixes the following v4l2-compliance failures:
- FIELD_ANY could be returned, which is not allowed.
- JPEG colorspace was set instead of SRGB.
- No control events.
- Empty bus_info in QUERYCAP.
- Overlay format handling wasn't zeroing bitmap/clips and
didn't return the chromakey correctly.
- G_FBUF didn't fill in many of the v4l2_framebuffer values.
Now also return the base address of the corresponding
framebuffer that this overlays.
- Missing ENUM/G/S_OUTPUT ioctls.
- ROTATE/VFLIP controls were added when the HW didn't support them.
With these changes 'v4l2-compliance' passes all non-streaming tests.
Tested on a Pandaboard and a Beagle XM board.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
arch/microblaze/ defines out_be32() and in_be32(), so don't do that
again in the driver source.
Fixes these build warnings:
../drivers/media/platform/fsl-viu.c:36: warning: "out_be32" redefined
../arch/microblaze/include/asm/io.h:50: note: this is the location of the previous definition
../drivers/media/platform/fsl-viu.c:37: warning: "in_be32" redefined
../arch/microblaze/include/asm/io.h:53: note: this is the location of the previous definition
Fixes: 29d7506863 ("media: fsl-viu: allow building it with COMPILE_TEST")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Error h264 bitstreams which picture info are out range of
decoder hardware specification, and no nal start code at the
beginning of the buffer, stop decoding and exit.
Signed-off-by: Rui Wang <gtk_ruiwang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for V4L2_PIX_FMT_BGRA/X32 and V4L2_PIX_FMT_RGBA/X32 formats.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cache flags, timestamps and timecode structure of OUTPUT buffers
in per-instance structure array and fill correctly the same when
the CAPTURE buffers are done.
This will make v4l2-compliance decoder streaming test happy.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Correct handling of OUTPUT buffers field and make v4l2-compliance
happy.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This refactors code for start/stop streaming vb2 operations and
adds a state machine handling similar to the one in stateful codec
API documentation. One major change is that now the HFI session is
started on STREAMON(OUTPUT) and stopped on REQBUF(OUTPUT,count=0),
during that time STREAMOFF(CAP,OUT) just flush buffers but doesn't
stop the session. The other major change is that now the capture
and output queues are completely separated.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In most of the cases the client will know better what could be
the maximum size for compressed data buffers. Change the driver
to permit the user to set bigger size for the compressed buffer
but make reasonable sanitation.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Until now we returned num_output_bufs set during reqbuf but
that could be wrong when we implement stateful Codec API. So
get the minimum buffers for capture from HFI. This is supposed
to be called after stream header parsing, i.e. after dequeue
v4l2 event for change resolution.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds three more helper functions:
* for internal buffers reallocation, applicable when we are doing
dynamic resolution change
* for initial buffer processing of capture and output queue buffer
types
All of them will be needed for stateful Codec API support.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This makes hfi_session_init to return an error when it is
already called without a call to hfi_session_deinit.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Export few HFI functions to use them from decoder to implement
more granular control needed for stateful Codec API compliance.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make hfi_flush function to receive an argument for the type
of flush.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Here we export few helper function to use them from decoder to
implement more granular control needed for stateful Codec API
compliance.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Accept the buffer size requested by client and compare it
against driver calculated size and set the maximum to
bitstream plane.
Signed-off-by: Malathi Gottam <mgottam@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Convert the via-camera to the vb2 framework. With this change this
driver passes all 'v4l2-compliance -s' tests on my OLPC 1.5.
Also tested with the Sugar 'Record' application.
All tests were done under the OLPC official 5.0.8 kernel.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
New RGB444, RGB555 and RGB32 variants were recently added. Now also
support them in vivid.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit "vivid: reorder CEC allocation and control set-up" missed that the CEC adapter
needs a valid vfd->name, and that was now filled in after the CEC adapter was
created, leading to an empty adapter name.
Fill in the name earlier.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 4ee895e71a ("media: vivid: reorder CEC allocation and control set-up")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Now that both Gen2 (video device centric) and Gen3 (media device
centric) modes of the driver have controls it is required to always
setup the controls when opening the devices. Remove the check which only
calls v4l2_ctrl_handler_setup() for Gen2 and call it unconditionally.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The R-Car VIN module supports V4L2_PIX_FMT_ARGB555 and
V4L2_PIX_FMT_ABGR32 pixel formats. Add the hardware register setup and
allow the alpha component to be changed while streaming using the
V4L2_CID_ALPHA_COMPONENT control.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warning for macro VNDMR_A8BIT]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In preparation to adding support for RGB pixel formats with an alpha
component add a control to allow the user to control which alpha value
should be used.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The value have nothing to do with ARGB1555, it controls if the alpha
component should be filled in for ARGB1555 or ARGB888. Rename it to
reflect this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rework OF endpoint parsing for the omap3isp driver. This does add some
lines of code. The benefits are still clear:
- the great complication related to callbacks in endpoint parsing is gone;
instead endpoints are obtained port by port and
- endpoints may now have a default bus configuration which was not
possible while using callbacks. This driver does not benefit from that
feature, but as the omap3isp is one of the exemplary drivers, this works
as an example for driver developers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The v4l2_async_notifier_add_fwnode_subdev() did not take a reference of
the added fwnode, relying on the caller to handle that instead, in essence
putting the fwnode to be added if there was an error.
As the reference is eventually released during the notifier cleanup, this
is not intuitive nor logical. Improve this by always getting a reference
when the function succeeds, and the caller releasing the reference when it
does not *itself* need it anymore.
Luckily, perhaps, there were just a handful of callers using the function.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The davinci-vpif driver dereferences its local endpoints after releasing
the reference to them.
The driver also puts its endpoints explicitly while the
of_graph_get_next_endpoint() does that, too, leading to obtaining a
reference once and releasing it twice.
Both are fixed by this patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch adds support for CSI2TX v2.1 version of the controller.
Signed-off-by: Jan Kotas <jank@cadence.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch fixes mapping of lanes in DPHY_CFG register
of the controller. In the register, bit 0 means first data lane.
In Linux we currently assume lane 0 is clock.
Signed-off-by: Jan Kotas <jank@cadence.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch adds lane checks for CSI2TX, to prevent clock lane
being used as a data lane.
Signed-off-by: Jan Kotas <jank@cadence.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add an extra condition to add the video output control class when the
device has some hdmi outputs defined. This is required to then always
be able to add the display present control, which is enabled when
there are some hdmi outputs.
This fixes the corner case where no_error_inj is enabled and the
device has no frame buffer but some hdmi outputs, as otherwise the
video output control class would be added anyway. Without this fix,
the sanity checks fail in v4l2_ctrl_new() as name is NULL.
Fixes: c533435ffb ("media: vivid: add display present control")
Cc: stable@vger.kernel.org # for 5.3
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
struct vpfe_pixel_format was defined, but never used. Remove it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Simplify vpfe_pixel_format to just contain the pixelformat and bpp fields.
All others are unused.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver didn't use struct v4l2_fh, so add it.
This is a very basic conversion. I can't test this on real hardware,
so I didn't dare to also convert the driver to start using the
v4l2-mem2mem ioctl/fop helpers.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This fixes autoloading the module by the OF compatible string.
Fixes: 83c40e6611 ("media: marvell-ccic/mmp: add devicetree support")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently, the v4l2 control code is a bit silent on errors.
Add debug messages on (hopefully) most of the error paths.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Instead of scattering black listing of pixel formats who are not
supported on particular platforms move it to a central location.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Format the current existing comments as kernel-doc comments, to be
reused at kernel documention. Add opening marks (/**) and return values.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As in "Function parameters" at doc-guide/kernel-doc.rst, "the
continuation of the description should start at the same column as the
previous line". Make the @producer_pixfmt comply with that.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As a more complete version of vimc_streamer_s_streamer comment was added
at "media: vimc: stream: add missing function documentation" commit in
.c file, remove the old documentation from .h file.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Convert this driver to use struct v4l2_fh and as a result switch to
using vb2/v4l2_mem2mem helper functions as well.
Only compile-tested due to lack of hardware. This driver is however
very similar to the m2m-deinterlace driver in this respect, and that
v4l2_fh conversion has been properly tested.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver is one of the few that is still not using struct
v4l2_fh. Convert it.
Tested on a Pandaboard.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Convert this driver to use struct v4l2_fh and as a result switch to
using vb2/v4l2_mem2mem helper functions as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The call to of_get_parent returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/media/platform/ti-vpe/cal.c:1621:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1607, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/media/platform/exynos4-is/fimc-is.c:813:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/fimc-is.c:870:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/fimc-is.c:885:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:545:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 541, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:528:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:534:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Building a KASAN-enabled kernel with clang ends up in a case where too
much is inlined into vivid_thread_vid_cap() and the stack usage grows
a lot, possibly when the register allocation fails to produce efficient
code and spills a lot of temporaries to the stack. This uses more
than twice the amount of stack than the sum of the individual functions
when they are not inlined:
drivers/media/platform/vivid/vivid-kthread-cap.c:766:12: error: stack frame size of 2208 bytes in function 'vivid_thread_vid_cap' [-Werror,-Wframe-larger-than=]
Marking two of the key functions in here as 'noinline_for_stack' avoids
the pathological case in clang without any apparent downside for gcc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The patch fixes various v4l2-compliance failures:
- missing support for control events
- support of s/g_std even though this doesn't apply to a webcam
- missing colorspace reporting
- bus_info wasn't filled in by VIDIOC_QUERYCAP
- parm.capture.readbuffers was overridden with wrong value
- viacam_enum_framesizes/intervals didn't check the arguments
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
