Use rwsem to ensure serialization of the callers and to avoid
starvation of high priority tasks, when the system is under
heavy IO workload.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit 0b6d4ca04a ("f2fs: don't return vmalloc() memory from
f2fs_kmalloc()"), f2fs_k{m,z}alloc() will not return vmalloc()'ed
memory, so clean up to use kfree() instead of kvfree() to free
vmalloc()'ed memory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.
This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:
1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
0 means youngest, 100 means oldest, if we set age threshold to 80
then select dirty segments which has age in range of [80, 100] as
candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;
2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.
3. merge valid blocks from source victim into target victim with
SSR alloctor.
Test steps:
- create 160 dirty segments:
* half of them have 128 valid blocks per segment
* left of them have 384 valid blocks per segment
- run background GC
Benefit: GC count and block movement count both decrease obviously:
- Before:
- Valid: 86
- Dirty: 1
- Prefree: 11
- Free: 6001 (6001)
GC calls: 162 (BG: 220)
- data segments : 160 (160)
- node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
- data blocks : 40960 (40960)
- node blocks : 494 (494)
IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments
- After:
- Valid: 87
- Dirty: 0
- Prefree: 4
- Free: 6008 (6008)
GC calls: 75 (BG: 76)
- data segments : 74 (74)
- node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
- data blocks : 12544 (12544)
- node blocks : 269 (269)
IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't let f2fs inner GC ruins original aging degree of segment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previous implementation of aligned pinfile allocation will:
- allocate new segment on cold data log no matter whether last used
segment is partially used or not, it makes IOs more random;
- force concurrent cold data/GCed IO going into warm data area, it
can make a bad effect on hot/cold data separation;
In this patch, we introduce a new type of log named 'inmem curseg',
the differents from normal curseg is:
- it reuses existed segment type (CURSEG_XXX_NODE/DATA);
- it only exists in memory, its segno, blkofs, summary will not b
persisted into checkpoint area;
With this new feature, we can enhance scalability of log, special
allocators can be created for purposes:
- pure lfs allocator for aligned pinfile allocation or file
defragmentation
- pure ssr allocator for later feature
So that, let's update aligned pinfile allocation to use this new
inmem curseg fwk.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
NVMe Zoned Namespace devices can have zone-capacity less than zone-size.
Zone-capacity indicates the maximum number of sectors that are usable in
a zone beginning from the first sector of the zone. This makes the sectors
sectors after the zone-capacity till zone-size to be unusable.
This patch set tracks zone-size and zone-capacity in zoned devices and
calculate the usable blocks per segment and usable segments per section.
If zone-capacity is less than zone-size mark only those segments which
start before zone-capacity as free segments. All segments at and beyond
zone-capacity are treated as permanently used segments. In cases where
zone-capacity does not align with segment size the last segment will start
before zone-capacity and end beyond the zone-capacity of the zone. For
such spanning segments only sectors within the zone-capacity are used.
During writes and GC manage the usable segments in a section and usable
blocks per segment. Segments which are beyond zone-capacity are never
allocated, and do not need to be garbage collected, only the segments
which are before zone-capacity needs to garbage collected.
For spanning segments based on the number of usable blocks in that
segment, write to blocks only up to zone-capacity.
Zone-capacity is device specific and cannot be configured by the user.
Since NVMe ZNS device zones are sequentially write only, a block device
with conventional zones or any normal block device is needed along with
the ZNS device for the metadata operations of F2fs.
A typical nvme-cli output of a zoned device shows zone start and capacity
and write pointer as below:
SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones
are in EMPTY state. For each zone, only zone start + 49MB is usable area,
any lba/sector after 49MB cannot be read or written to, the drive will fail
any attempts to read/write. So, the second zone starts at 64MB and is
usable till 113MB (64 + 49) and the range between 113 and 128MB is
again unusable. The next zone starts at 128MB, and so on.
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added a new gc_urgent mode, GC_URGENT_LOW, in which mode
F2FS will lower the bar of checking idle in order to
process outstanding discard commands and GC a little bit
aggressively.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If f2fs_grab_cache_page() fails, it needs to return -ENOMEM.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs_ioc_gc_range performs multiple segments gc ops, the return
value of f2fs_ioc_gc_range is determined by the last segment gc ops.
If its ops failed, the f2fs_ioc_gc_range will be considered to be failed
despite some of previous segments gc ops succeeded. Therefore, so we
fix: Redefine the return value of getting victim ops and add exception
handle for f2fs_gc. In particular, 1).if target has no valid block, it
will go on. 2).if target sectoion has valid block(s), but it is current
section, we will reminder the caller.
Signed-off-by: Qilong Zhang <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use validation of @fio to inidcate whether caller want to serialize IOs
in io.io_list or not, then @add_list will be redundant, remove it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Assume each section has 4 segment:
.___________________________.
|_Segment0_|_..._|_Segment3_|
. .
. .
.__________.
|_section0_|
Segment 0~2 has 0 valid block, segment 3 has 512 valid blocks.
It will fail if we want to gc section0 in this scenes,
because all 4 segments in section0 is not dirty.
So we should use dirty section bitmap instead of dirty segment bitmap
to get right victim section.
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sahitya raised an issue:
- prevent meta updates while checkpoint is in progress
allocate_segment_for_resize() can cause metapage updates if
it requires to change the current node/data segments for resizing.
Stop these meta updates when there is a checkpoint already
in progress to prevent inconsistent CP data.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Data flush can generate heavy IO and cause long latency during
flush, so it's not appropriate to trigger it in foreground
operation.
And also, we may face below potential deadlock during data flush:
- f2fs_write_multi_pages
- f2fs_write_raw_pages
- f2fs_write_single_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg
- f2fs_sync_dirty_inodes
- filemap_fdatawrite -- stuck on flush same cluster
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fields in struct f2fs_super_block should be updated under coverage
of sb_lock, fix to adjust update_sb_metadata() for that rule.
Fixes: 04f0b2eaa3 ("f2fs: ioctl for removing a range from F2FS")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Even though online resize is successfully done, a SPO immediately
after resize, still causes below error in the next mount.
[ 11.294650] F2FS-fs (sda8): Wrong user_block_count: 2233856
[ 11.300272] F2FS-fs (sda8): Failed to get valid F2FS checkpoint
This is because after FS metadata is updated in update_fs_metadata()
if the SBI_IS_DIRTY is not dirty, then CP will not be done to reflect
the new user_block_count.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Geert Uytterhoeven reported:
for parameter HZ/50 in congestion_wait(BLK_RW_ASYNC, HZ/50);
On some platforms, HZ can be less than 50, then unexpected 0 timeout
jiffies will be set in congestion_wait().
This patch introduces a macro DEFAULT_IO_TIMEOUT to wrap a determinate
value with msecs_to_jiffies(20) to instead HZ/50 to avoid such issue.
Quoted from Geert Uytterhoeven:
"A timeout of HZ means 1 second.
HZ/50 means 20 ms, but has the risk of being zero, if HZ < 50.
If you want to use a timeout of 20 ms, you best use msecs_to_jiffies(20),
as that takes care of the special cases, and never returns 0."
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If first segment is empty and migration_granularity is 1, we can't move this
at all.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are three status for background gc: on, off and sync, it's
a little bit confused to use test_opt(BG_GC) and test_opt(FORCE_FG_GC)
combinations to indicate status of background gc.
So let's remove F2FS_MOUNT_BG_GC and F2FS_MOUNT_FORCE_FG_GC mount
options, and add F2FS_OPTION().bggc_mode with below three status
to clean up codes and enhance bggc mode's scalability.
enum {
BGGC_MODE_ON, /* background gc is on */
BGGC_MODE_OFF, /* background gc is off */
BGGC_MODE_SYNC, /*
* background gc is on, migrating blocks
* like foreground gc
*/
};
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes F2FS_MOUNT_ADAPTIVE and F2FS_MOUNT_LFS mount options,
and add F2FS_OPTION.fs_mode with below two status to indicate filesystem
mode.
enum {
FS_MODE_ADAPTIVE, /* use both lfs/ssr allocation */
FS_MODE_LFS, /* use lfs allocation only */
};
It can enhance code readability and fs mode's scalability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- rename datablock_addr() to data_blkaddr().
- wrap data_blkaddr() with f2fs_data_blkaddr() to clean up
parameters.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Lack of maintenance on comments may mislead developers, fix them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently f2fs stats are only available from /d/f2fs/status. This patch
adds some of the f2fs stats to sysfs so that they are accessible even
when debugfs is not mounted.
The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks
Signed-off-by: Hridya Valsaraju <hridya@google.com>
[Jaegeuk Kim: allow STAT_FS without DEBUG_FS]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mutex lock won't serialize callers, in order to avoid starving of unlucky
caller, let's use rwsem lock instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We must stop GC, once the segment becomes fully valid. Otherwise, it can
produce another dirty segments by moving valid blocks in the segment partially.
Ramon hit no free segment panic sometimes and saw this case happens when
validating reliable file pinning feature.
Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Multi-device metadata should be updated in resize_fs as well.
Also, we check that the new FS size still reaches the last device.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Policy - foreground GC, LFS mode and greedy GC mode.
Under this policy, f2fs_gc() loops forever to GC as it doesn't have
enough free segements to proceed and thus it keeps calling gc_more
for the same victim segment. This can happen if the selected victim
segment could not be GC'd due to failed blkaddr validity check i.e.
is_alive() returns false for the blocks set in current validity map.
Fix this by not resetting the sbi->cur_victim_sec to NULL_SEGNO, when
the segment selected could not be GC'd. This helps to select another
segment for GC and thus helps to proceed forward with GC.
[Note]
This can happen due to is_alive as well as atomic_file which skipps
GC.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Policy - Foreground GC, LFS and greedy GC mode.
Under this policy, f2fs_gc() loops forever to GC as it doesn't have
enough free segements to proceed and thus it keeps calling gc_more
for the same victim segment. This can happen if the selected victim
segment could not be GC'd due to failed blkaddr validity check i.e.
is_alive() returns false for the blocks set in current validity map.
Fix this by keeping track of such invalid segments and skip those
segments for selection in get_victim_by_default() to avoid endless
GC loop under such error scenarios. Currently, add this logic under
CONFIG_F2FS_CHECK_FS to be able to root cause the issue in debug
version.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix wrong bitmap size]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_allocate_data_block() invalidates old block address and enable new block
address. Then, if we try to read old block by f2fs_submit_page_bio(), it will
give WARN due to reading invalid blocks.
Let's make the order sanely back.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.
This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.
EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.
This feature can be used for adjusting partition sizes online.
History of the patch:
Sahitya Tummala:
- Add this ioctl for f2fs_compat_ioctl() as well.
- Fix debugfs status to reflect the online resize changes.
- Fix potential race between online resize path and allocate new data
block path or gc path.
Others:
- Rename some identifiers.
- Add some error handling branches.
- Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
- Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
- During resizing, force to empty sit_journal and forbid adding new
entries to it, in order to avoid invalid segno in journal after resize.
- Reduce sbi->user_block_count before resize starts.
- Commit the updated superblock first, and then update in-memory metadata
only when the former succeeds.
- Target block count must align to sections.
- Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
- In free_segment_range(), reduce granularity of gc_mutex.
- Add protection on curseg migration.
- Add freeze_bdev() and thaw_bdev() for resize fs.
- Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
- Recover super_block and FS metadata when resize fails.
- No need to clear CP_FSCK_FLAG in update_ckpt_flags().
- Clean up the sb and fs metadata update functions for resize_fs.
Geert Uytterhoeven:
- Use div_u64*() for 64-bit divisions
Arnd Bergmann:
- Not all architectures support get_user() with a 64-bit argument:
ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
Use copy_from_user() here, this will always work.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215https://bugzilla.kernel.org/show_bug.cgi?id=203223https://bugzilla.kernel.org/show_bug.cgi?id=203231https://bugzilla.kernel.org/show_bug.cgi?id=203235https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch expands scalability of dnode layout, it allows address pointer
number of dnode aligning to specified size (now, the size is one byte by
default), and later the number can align to compress cluster size
(1 << n bytes, n=[2,..)), it can avoid cluster acrossing two dnode, making
design of compress meta layout simple.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203211
- Overview
When mounting the attached crafted image and making a new file, I got this error and the error messages keep repeating.
The image is intentionally fuzzed from a normal f2fs image for testing and I run with option CONFIG_F2FS_CHECK_FS on.
- Reproduces
mkdir test
mount -t f2fs tmp.img test
cd test
touch t
- Messages
[ 58.820451] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.821485] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.822530] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.823571] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.824616] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.825640] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.826663] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.827698] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.828719] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.829759] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.830783] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.831828] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.832869] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.833888] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.834945] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.835996] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.837028] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.838051] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.839072] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.840100] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.841147] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.842186] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.843214] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.844267] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.845282] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.846305] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.847341] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
... (repeating)
During GC, if segment type stored in SSA and SIT is inconsistent, we just
skip migrating current segment directly, since we need to know the exact
type to decide the migration function we use.
So in foreground GC, we will easily run into a infinite loop as we may
select the same victim segment which has inconsistent type due to greedy
policy. In order to end up this, we choose to shutdown filesystem. For
backgrond GC, we need to do that as well, so that we can avoid latter
potential infinite looped foreground GC.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.
However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.
Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.
Fixes: 7bb3a371d1 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For all ordered cases in f2fs_wait_on_page_writeback(), we need to
check PageWriteback status, so let's clean up to relocate the check
into f2fs_wait_on_page_writeback().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
One report says memalloc failure during mount.
(unwind_backtrace) from [<c010cd4c>] (show_stack+0x10/0x14)
(show_stack) from [<c049c6b8>] (dump_stack+0x8c/0xa0)
(dump_stack) from [<c024fcf0>] (warn_alloc+0xc4/0x160)
(warn_alloc) from [<c0250218>] (__alloc_pages_nodemask+0x3f4/0x10d0)
(__alloc_pages_nodemask) from [<c0270450>] (kmalloc_order_trace+0x2c/0x120)
(kmalloc_order_trace) from [<c03fa748>] (build_node_manager+0x35c/0x688)
(build_node_manager) from [<c03de494>] (f2fs_fill_super+0xf0c/0x16cc)
(f2fs_fill_super) from [<c02a5864>] (mount_bdev+0x15c/0x188)
(mount_bdev) from [<c03da624>] (f2fs_mount+0x18/0x20)
(f2fs_mount) from [<c02a68b8>] (mount_fs+0x158/0x19c)
(mount_fs) from [<c02c3c9c>] (vfs_kern_mount+0x78/0x134)
(vfs_kern_mount) from [<c02c76ac>] (do_mount+0x474/0xca4)
(do_mount) from [<c02c8264>] (SyS_mount+0x94/0xbc)
(SyS_mount) from [<c0108180>] (ret_fast_syscall+0x0/0x48)
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reorders flow from
- update page
- set_page_dirty
- wait_on_page_writeback
to
- wait_on_page_writeback
- update page
- set_page_dirty
The reason is:
- set_page_dirty will increase reference of dirty page, the reference
should be cleared before wait_on_page_writeback to keep its consistency.
- some devices need stable page during page writebacking, so we
should not change page's data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Adjust the trace print in f2fs_get_victim() to cover GC done by
F2FS_IOC_GARBAGE_COLLECT_RANGE.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Allow node type segments also to be GC'd via f2fs ioctl
F2FS_IOC_GARBAGE_COLLECT_RANGE.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Section is minimal garbage collection unit of f2fs, in zoned block
device, or ancient block mapping flash device, in order to improve
GC efficiency, we can align GC unit to lower device erase unit,
normally, it consists of multiple of segments.
Once background or foreground GC triggers, it brings a large number
of IOs, which will impact user IO, and also occupy cpu/memory resource
intensively.
So, to reduce impact of GC on large size section, this patch supports
subsectional GC, in one cycle of GC, it only migrate partial segment{s}
in victim section. Currently, by default, we use sbi->segs_per_sec as
migration granularity.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a wrapper __is_large_section() to clean up codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
