mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
253ca8678d
12611 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
ecae0bd517 |
Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
||
|
Linus Torvalds
|
d5acbc60fa |
for-6.7-tag
-----BEGIN PGP SIGNATURE-----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=9TVx
-----END PGP SIGNATURE-----
Merge tag 'for-6.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"New features:
- raid-stripe-tree
New tree for logical file extent mapping where the physical mapping
may not match on multiple devices. This is now used in zoned mode
to implement RAID0/RAID1* profiles, but can be used in non-zoned
mode as well. The support for RAID56 is in development and will
eventually fix the problems with the current implementation. This
is a backward incompatible feature and has to be enabled at mkfs
time.
- simple quota accounting (squota)
A simplified mode of qgroup that accounts all space on the initial
extent owners (a subvolume), the snapshots are then cheap to create
and delete. The deletion of snapshots in fully accounting qgroups
is a known CPU/IO performance bottleneck.
The squota is not suitable for the general use case but works well
for containers where the original subvolume exists for the whole
time. This is a backward incompatible feature as it needs extending
some structures, but can be enabled on an existing filesystem.
- temporary filesystem fsid (temp_fsid)
The fsid identifies a filesystem and is hard coded in the
structures, which disallows mounting the same fsid found on
different devices.
For a single device filesystem this is not strictly necessary, a
new temporary fsid can be generated on mount e.g. after a device is
cloned. This will be used by Steam Deck for root partition A/B
testing, or can be used for VM root images.
Other user visible changes:
- filesystems with partially finished metadata_uuid conversion cannot
be mounted anymore and the uuid fixup has to be done by btrfs-progs
(btrfstune).
Performance improvements:
- reduce reservations for checksum deletions (with enabled free space
tree by factor of 4), on a sample workload on file with many
extents the deletion time decreased by 12%
- make extent state merges more efficient during insertions, reduce
rb-tree iterations (run time of critical functions reduced by 5%)
Core changes:
- the integrity check functionality has been removed, this was a
debugging feature and removal does not affect other integrity
checks like checksums or tree-checker
- space reservation changes:
- more efficient delayed ref reservations, this avoids building up
too much work or overusing or exhausting the global block
reserve in some situations
- move delayed refs reservation to the transaction start time,
this prevents some ENOSPC corner cases related to exhaustion of
global reserve
- improvements in reducing excessive reservations for block group
items
- adjust overcommit logic in near full situations, account for one
more chunk to eventually allocate metadata chunk, this is mostly
relevant for small filesystems (<10GiB)
- single device filesystems are scanned but not registered (except
seed devices), this allows temp_fsid to work
- qgroup iterations do not need GFP_ATOMIC allocations anymore
- cleanups, refactoring, reduced data structure size, function
parameter simplifications, error handling fixes"
* tag 'for-6.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (156 commits)
btrfs: open code timespec64 in struct btrfs_inode
btrfs: remove redundant log root tree index assignment during log sync
btrfs: remove redundant initialization of variable dirty in btrfs_update_time()
btrfs: sysfs: show temp_fsid feature
btrfs: disable the device add feature for temp-fsid
btrfs: disable the seed feature for temp-fsid
btrfs: update comment for temp-fsid, fsid, and metadata_uuid
btrfs: remove pointless empty log context list check when syncing log
btrfs: update comment for struct btrfs_inode::lock
btrfs: remove pointless barrier from btrfs_sync_file()
btrfs: add and use helpers for reading and writing last_trans_committed
btrfs: add and use helpers for reading and writing fs_info->generation
btrfs: add and use helpers for reading and writing log_transid
btrfs: add and use helpers for reading and writing last_log_commit
btrfs: support cloned-device mount capability
btrfs: add helper function find_fsid_by_disk
btrfs: stop reserving excessive space for block group item insertions
btrfs: stop reserving excessive space for block group item updates
btrfs: reorder btrfs_inode to fill gaps
btrfs: open code btrfs_ordered_inode_tree in btrfs_inode
...
|
||
|
Linus Torvalds
|
14ab6d425e |
vfs-6.7.ctime
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppYgAKCRCRxhvAZXjc okIHAP9anLz1QDyMLH12ASuHjgBc0Of3jcB6NB97IWGpL4O21gEA46ohaD+vcJuC YkBLU3lXqQ87nfu28ExFAzh10hG2jwM= =m4pB -----END PGP SIGNATURE----- Merge tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs Pull vfs inode time accessor updates from Christian Brauner: "This finishes the conversion of all inode time fields to accessor functions as discussed on list. Changing timestamps manually as we used to do before is error prone. Using accessors function makes this robust. It does not contain the switch of the time fields to discrete 64 bit integers to replace struct timespec and free up space in struct inode. But after this, the switch can be trivially made and the patch should only affect the vfs if we decide to do it" * tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits) fs: rename inode i_atime and i_mtime fields security: convert to new timestamp accessors selinux: convert to new timestamp accessors apparmor: convert to new timestamp accessors sunrpc: convert to new timestamp accessors mm: convert to new timestamp accessors bpf: convert to new timestamp accessors ipc: convert to new timestamp accessors linux: convert to new timestamp accessors zonefs: convert to new timestamp accessors xfs: convert to new timestamp accessors vboxsf: convert to new timestamp accessors ufs: convert to new timestamp accessors udf: convert to new timestamp accessors ubifs: convert to new timestamp accessors tracefs: convert to new timestamp accessors sysv: convert to new timestamp accessors squashfs: convert to new timestamp accessors server: convert to new timestamp accessors client: convert to new timestamp accessors ... |
||
|
Linus Torvalds
|
7352a6765c |
vfs-6.7.xattr
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppWAAKCRCRxhvAZXjc okB2AP4jjoRErJBwj245OIDJqzoj4m4UVOVd0MH2AkiSpANczwD/TToChdpusY2y qAYg1fQoGMbDVlb7Txaj9qI9ieCf9w0= =2PXg -----END PGP SIGNATURE----- Merge tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs Pull vfs xattr updates from Christian Brauner: "The 's_xattr' field of 'struct super_block' currently requires a mutable table of 'struct xattr_handler' entries (although each handler itself is const). However, no code in vfs actually modifies the tables. This changes the type of 's_xattr' to allow const tables, and modifies existing file systems to move their tables to .rodata. This is desirable because these tables contain entries with function pointers in them; moving them to .rodata makes it considerably less likely to be modified accidentally or maliciously at runtime" * tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits) const_structs.checkpatch: add xattr_handler net: move sockfs_xattr_handlers to .rodata shmem: move shmem_xattr_handlers to .rodata overlayfs: move xattr tables to .rodata xfs: move xfs_xattr_handlers to .rodata ubifs: move ubifs_xattr_handlers to .rodata squashfs: move squashfs_xattr_handlers to .rodata smb: move cifs_xattr_handlers to .rodata reiserfs: move reiserfs_xattr_handlers to .rodata orangefs: move orangefs_xattr_handlers to .rodata ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata ntfs3: move ntfs_xattr_handlers to .rodata nfs: move nfs4_xattr_handlers to .rodata kernfs: move kernfs_xattr_handlers to .rodata jfs: move jfs_xattr_handlers to .rodata jffs2: move jffs2_xattr_handlers to .rodata hfsplus: move hfsplus_xattr_handlers to .rodata hfs: move hfs_xattr_handlers to .rodata gfs2: move gfs2_xattr_handlers_max to .rodata fuse: move fuse_xattr_handlers to .rodata ... |
||
|
Linus Torvalds
|
d4e175f2c4 |
vfs-6.7.super
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZT0C2gAKCRCRxhvAZXjc otV8AQCK5F9ONoQ7ISpdrKyUJiswySGXx0CYPfXbSg5gHH87zgEAua3vwVKeGXXF 5iVsdiNzIIQDwGDx7FyxufL4ggcN6gQ= =E1kV -----END PGP SIGNATURE----- Merge tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs Pull vfs superblock updates from Christian Brauner: "This contains the work to make block device opening functions return a struct bdev_handle instead of just a struct block_device. The same struct bdev_handle is then also passed to block device closing functions. This allows us to propagate context from opening to closing a block device without having to modify all users everytime. Sidenote, in the future we might even want to try and have block device opening functions return a struct file directly but that's a series on top of this. These are further preparatory changes to be able to count writable opens and blocking writes to mounted block devices. That's a separate piece of work for next cycle and for that we absolutely need the changes to btrfs that have been quietly dropped somehow. Originally the series contained a patch that removed the old blkdev_*() helpers. But since this would've caused needles churn in -next for bcachefs we ended up delaying it. The second piece of work addresses one of the major annoyances about the work last cycle, namely that we required dropping s_umount whenever we used the superblock and fs_holder_ops for a block device. The reason for that requirement had been that in some codepaths s_umount could've been taken under disk->open_mutex (that's always been the case, at least theoretically). For example, on surprise block device removal or media change. And opening and closing block devices required grabbing disk->open_mutex as well. So we did the work and went through the block layer and fixed all those places so that s_umount is never taken under disk->open_mutex. This means no more brittle games where we yield and reacquire s_umount during block device opening and closing and no more requirements where block devices need to be closed. Filesystems don't need to care about this. There's a bunch of other follow-up work such as moving block device freezing and thawing to holder operations which makes it work for all block devices and not just the main block device just as we did for surprise removal. But that is for next cycle. Tested with fstests for all major fses, blktests, LTP" * tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (37 commits) porting: update locking requirements fs: assert that open_mutex isn't held over holder ops block: assert that we're not holding open_mutex over blk_report_disk_dead block: move bdev_mark_dead out of disk_check_media_change block: WARN_ON_ONCE() when we remove active partitions block: simplify bdev_del_partition() fs: Avoid grabbing sb->s_umount under bdev->bd_holder_lock jfs: fix log->bdev_handle null ptr deref in lbmStartIO bcache: Fixup error handling in register_cache() xfs: Convert to bdev_open_by_path() reiserfs: Convert to bdev_open_by_dev/path() ocfs2: Convert to use bdev_open_by_dev() nfs/blocklayout: Convert to use bdev_open_by_dev/path() jfs: Convert to bdev_open_by_dev() f2fs: Convert to bdev_open_by_dev/path() ext4: Convert to bdev_open_by_dev() erofs: Convert to use bdev_open_by_path() btrfs: Convert to bdev_open_by_path() fs: Convert to bdev_open_by_dev() mm/swap: Convert to use bdev_open_by_dev() ... |
||
Jan Kara
|
86ec15d00b
|
btrfs: Convert to bdev_open_by_path()
Convert btrfs to use bdev_open_by_path() and pass the handle around. We also drop the holder from struct btrfs_device as it is now not needed anymore. CC: David Sterba <dsterba@suse.com> CC: linux-btrfs@vger.kernel.org Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-20-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
e017769f4c |
for-6.6-rc7-tag
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmU2lLEACgkQxWXV+ddt WDvCThAApe+zMNdEhQ/cgrvfzP/X91Q53PXQsdVsrujPyUV8eEV4oJzEwVbJhRdw 3ukIQtvyAMNiWhEBhOQRwxjuUoTCApGAeEEEl1cWWEqQ7G2/2LS4+bcWzgQ3Vu32 dzYL37ddsfe4n7OgfnymtMrnv7kge0XbAlY3GbavaDccZDQDqcD5wSAOyOhfIsH7 kcu4sA5Fi44wVSfAJX1Dms+wXfsmQu/sd3c9Gcyce9Hpy1cEW3vWbApLBE4K0aKX /JHTdmkAJ20a4APQsfGH+UymyuZgr8d2eGmL9rVYKhT/c+Dow0lNAWYkvGf/MawM CX3GdP6f6ZOR/anCPZ8nqZCE5AoFykGazvpCCSrvCOpU7o7GqxbAQkWWFcMp1FHW 9TFrj81WK18DeCfCNw7lR3sdMy/2o2nnSUAw3DFY4n/3Lek7FUmrBTHvXlWDot7T TM9CzYGF840QhL5s5SMYS09YmeI0I34L7HJAi/+qli48SooGuL9RZ29TmzHIX69Y 2bgpS64j06p/AGEnfHAcT1LbpiFCPmO5cpXKv/t40GL5QO5d4WV698ysDGoPYUPO 8CPL85Y8cao56KGJLyOroGz0P1bo+RdNe5bN6xJJoTRn1Y9oUA+bQSnN8x9iuunF 9QZrAIHzNyDcRGzoqgDW+3bivOvIus/Dto/u1P3ap68kP2HTVsY= =gOyi -----END PGP SIGNATURE----- Merge tag 'for-6.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One more fix for a problem with snapshot of a newly created subvolume that can lead to inconsistent data under some circumstances. Kernel 6.5 added a performance optimization to skip transaction commit for subvolume creation but this could end up with newer data on disk but not linked to other structures. The fix itself is an added condition, the rest of the patch is a parameter added to several functions" * tag 'for-6.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix unwritten extent buffer after snapshotting a new subvolume |
||
Filipe Manana
|
eb96e22193 |
btrfs: fix unwritten extent buffer after snapshotting a new subvolume
When creating a snapshot of a subvolume that was created in the current transaction, we can end up not persisting a dirty extent buffer that is referenced by the snapshot, resulting in IO errors due to checksum failures when trying to read the extent buffer later from disk. A sequence of steps that leads to this is the following: 1) At ioctl.c:create_subvol() we allocate an extent buffer, with logical address 36007936, for the leaf/root of a new subvolume that has an ID of 291. We mark the extent buffer as dirty, and at this point the subvolume tree has a single node/leaf which is also its root (level 0); 2) We no longer commit the transaction used to create the subvolume at create_subvol(). We used to, but that was recently removed in commit |
||
|
Linus Torvalds
|
7cf4bea77a |
for-6.6-rc6-tag
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmUuntEACgkQxWXV+ddt WDssdQ/9Fo6tN+MCH5ISAcvsW6WvBUWT62MrDnzawh96QhUf3NYf9sjME7QqwHHv w60SDiqRlAd5UzxdIPC4Qa/6GVZZh2yFLzew3l8Fh6anxhjO5argdsfx1Wv4ADk/ FHI8zs6EZiTlk0JmEnHNclliZfaDutBRQiPL+HZx4+FCrJweS5U/4Jpg7vdfp/tp eWdJ51pDM8iyqGTsP7a7/VaL5wLoJhbdD9wYgupZUhvY6g2tCZ71/hNiWdbKtCK8 EyQxXiAlc+k1UflOx6Xip1HLIh6HmKwxntXxRy+yj4IvJ3PhI+KS5Nqdl35TszN9 6y9MRo3oCU+2y89Yay4HZZb6DLxcAi6VwpyswnntodFQ+ICXEw7ZaNi3rSO+FCO8 KxfhLniMD5gflRP4gy+o9iZxgVQ75nmiPgBt53r+sAKZ7lv86x84DJ/ZUqL8EV0e OJhxdzhoT0Ks8OstIuE87fgzUCjqMcgAavxcn1psKBC6/JY9v6OneA8qauSswkKs P+diJIqZHHOBQVKFedqdIrDU6AstivSBq0ToPBslbBlcy97EO4IRoiMIw+QgHPYn CHsPHtooBmxPyw+4HTFuzY1NIrSeUFYxTDAs9p5kMPmltkVAlLPcrpGZVya9tjds l/YuwY2f0C9Q1pjcAc9FcN8Y5kLRCYNEWMl0M1VpC22KgjRN6r0= =GrNu -----END PGP SIGNATURE----- Merge tag 'for-6.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "Fix a bug in chunk size decision that could lead to suboptimal placement and filling patterns" * tag 'for-6.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix stripe length calculation for non-zoned data chunk allocation |
||
Jeff Layton
|
b1c38a1338
|
btrfs: convert to new timestamp accessors
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-21-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Zygo Blaxell
|
8a540e990d |
btrfs: fix stripe length calculation for non-zoned data chunk allocation
Commit |
||
David Sterba
|
c6e8f898f5 |
btrfs: open code timespec64 in struct btrfs_inode
The type of timespec64::tv_nsec is 'unsigned long', while we have only u32 for on-disk and in-memory. This wastes a few bytes in btrfs_inode. Add separate members for sec and nsec with the corresponding type width. This creates a 4 byte hole in btrfs_inode which can be utilized in the future. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
cc687c2ef4 |
btrfs: remove redundant log root tree index assignment during log sync
During log syncing, when we start updating the log root tree we compute
an index value, stored in variable 'index2', once we lock the log root
tree's mutex. This value depends on the log root's log_transid. And
shortly after we compute again the same value for 'index2' - the value
is exactly the same since we haven't released the mutex and therefore
the log_transid of the log root is the same as before.
This second 'index2' computation became pointless after commit
|
||
Colin Ian King
|
a666ce9bab |
btrfs: remove redundant initialization of variable dirty in btrfs_update_time()
The variable dirty is initialized with a value that is never read, it is being re-assigned later on. Remove the redundant initialization. Cleans up clang scan build warning: fs/btrfs/inode.c:5965:7: warning: Value stored to 'dirty' during its initialization is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
Anand Jain
|
f362374006 |
btrfs: sysfs: show temp_fsid feature
This adds sysfs objects to indicate temp_fsid feature support and
its status.
/sys/fs/btrfs/features/temp_fsid
/sys/fs/btrfs/<UUID>/temp_fsid
For example:
Consider two cloned and mounted devices.
$ blkid /dev/sdc[1-2]
/dev/sdc1: UUID="509ad44b-ad2a-4a8a-bc8d-fe69db7220d5" ..
/dev/sdc2: UUID="509ad44b-ad2a-4a8a-bc8d-fe69db7220d5" ..
One gets actual fsid, and the other gets the temp_fsid when
mounted.
$ btrfs filesystem show -m
Label: none uuid: 509ad44b-ad2a-4a8a-bc8d-fe69db7220d5
Total devices 1 FS bytes used 54.14MiB
devid 1 size 300.00MiB used 144.00MiB path /dev/sdc1
Label: none uuid: 33bad74e-c91b-43a5-aef8-b3cab97ae63a
Total devices 1 FS bytes used 54.14MiB
devid 1 size 300.00MiB used 144.00MiB path /dev/sdc2
Their sysfs as below.
$ cat /sys/fs/btrfs/features/temp_fsid
0
$ cat /sys/fs/btrfs/509ad44b-ad2a-4a8a-bc8d-fe69db7220d5/temp_fsid
0
$ cat /sys/fs/btrfs/33bad74e-c91b-43a5-aef8-b3cab97ae63a/temp_fsid
1
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Anand Jain
|
ac6ea6a914 |
btrfs: disable the device add feature for temp-fsid
The device addition operation will transform the cloned temp-fsid mounted device into a multi-device filesystem. Therefore, it is marked as unsupported. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
c47b02c1bd |
btrfs: disable the seed feature for temp-fsid
A seed device is an integral component of the sprout device, which functions as a multi-device filesystem. Therefore, temp-fsid feature is not supported. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
000331bb03 |
btrfs: update comment for temp-fsid, fsid, and metadata_uuid
Update the comment to explain the relationship between temp_fsid, fsid, and metadata_uuid. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
3cf63ddf29 |
btrfs: remove pointless empty log context list check when syncing log
When syncing the log, if we get an error when updating the log root, we
check first if the log root tree context is in a log context list, and if
so it deletes from the log root tree context from the list. This check
however is pointless because at this moment the context is always in a
list, he have just added it to a context list. The check became pointless
after commit
|
||
|
Filipe Manana
|
68539bd0e7 |
btrfs: update comment for struct btrfs_inode::lock
Update the comment for the lock named "lock" in struct btrfs_inode because it does not mention that the fields "delalloc_bytes", "defrag_bytes", "csum_bytes", "outstanding_extents" and "disk_i_size" are also protected by that lock. Also add a comment on top of each field protected by this lock to mention that the lock protects them. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
5ca1949b79 |
btrfs: remove pointless barrier from btrfs_sync_file()
The memory barrier (smp_mb()) at btrfs_sync_file() is completely redundant
now that fs_info->last_trans_committed is read using READ_ONCE(), with the
helper btrfs_get_last_trans_committed(), and written using WRITE_ONCE()
with the helper btrfs_set_last_trans_committed().
This barrier was introduced in 2011, by commit
|
||
|
Filipe Manana
|
0124855ff1 |
btrfs: add and use helpers for reading and writing last_trans_committed
Currently the last_trans_committed field of struct btrfs_fs_info is modified and read without any locking or other protection. For example early in the fsync path, skip_inode_logging() is called which reads fs_info->last_trans_committed, but at the same time we can have a transaction commit completing and updating that field. In the case of an fsync this is harmless and any data race should be rare and at most cause an unnecessary logging of an inode. To avoid data race warnings from tools like KCSAN and other issues such as load and store tearing (amongst others, see [1]), create helpers to access the last_trans_committed field of struct btrfs_fs_info using READ_ONCE() and WRITE_ONCE(), and use these helpers everywhere. [1] https://lwn.net/Articles/793253/ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
4a4f8fe2b0 |
btrfs: add and use helpers for reading and writing fs_info->generation
Currently the generation field of struct btrfs_fs_info is always modified while holding fs_info->trans_lock locked. Most readers will access this field without taking that lock but while holding a transaction handle, which is safe to do due to the transaction life cycle. However there are other readers that are neither holding the lock nor holding a transaction handle open: 1) When reading an inode from disk, at btrfs_read_locked_inode(); 2) When reading the generation to expose it to sysfs, at btrfs_generation_show(); 3) Early in the fsync path, at skip_inode_logging(); 4) When creating a hole at btrfs_cont_expand(), during write paths, truncate and reflinking; 5) In the fs_info ioctl (btrfs_ioctl_fs_info()); 6) While mounting the filesystem, in the open_ctree() path. In these cases it's safe to directly read fs_info->generation as no one can concurrently start a transaction and update fs_info->generation. In case of the fsync path, races here should be harmless, and in the worst case they may cause a fsync to log an inode when it's not really needed, so nothing bad from a functional perspective. In the other cases it's not so clear if functional problems may arise, though in case 1 rare things like a load/store tearing [1] may cause the BTRFS_INODE_NEEDS_FULL_SYNC flag not being set on an inode and therefore result in incorrect logging later on in case a fsync call is made. To avoid data race warnings from tools like KCSAN and other issues such as load and store tearing (amongst others, see [1]), create helpers to access the generation field of struct btrfs_fs_info using READ_ONCE() and WRITE_ONCE(), and use these helpers where needed. [1] https://lwn.net/Articles/793253/ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
6008859b6c |
btrfs: add and use helpers for reading and writing log_transid
Currently the log_transid field of a root is always modified while holding the root's log_mutex locked. Most readers of a root's log_transid are also holding the root's log_mutex locked, however there is one exception which is btrfs_set_inode_last_trans() where we don't take the lock to avoid blocking several operations if log syncing is happening in parallel. Any races here should be harmless, and in the worst case they may cause a fsync to log an inode when it's not really needed, so nothing bad from a functional perspective. To avoid data race warnings from tools like KCSAN and other issues such as load and store tearing (amongst others, see [1]), create helpers to access the log_transid field of a root using READ_ONCE() and WRITE_ONCE(), and use these helpers where needed. [1] https://lwn.net/Articles/793253/ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
f985078796 |
btrfs: add and use helpers for reading and writing last_log_commit
Currently, the last_log_commit of a root can be accessed concurrently without any lock protection. Readers can be calling btrfs_inode_in_log() early in a fsync call, which reads a root's last_log_commit, while a writer can change the last_log_commit while a log tree if being synced, at btrfs_sync_log(). Any races here should be harmless, and in the worst case they may cause a fsync to log an inode when it's not really needed, so nothing bad from a functional perspective. To avoid data race warnings from tools like KCSAN and other issues such as load and store tearing (amongst others, see [1]), create helpers to access the last_log_commit field of a root using READ_ONCE() and WRITE_ONCE(), and use these helpers everywhere. [1] https://lwn.net/Articles/793253/ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
a5b8a5f9f8 |
btrfs: support cloned-device mount capability
Guilherme's previous work [1] aimed at the mounting of cloned devices using a superblock flag SINGLE_DEV during mkfs. [1] https://lore.kernel.org/linux-btrfs/20230831001544.3379273-1-gpiccoli@igalia.com/ Building upon this work, here is in memory only approach. As it mounts we determine if the same fsid is already mounted if then we generate a random temp fsid which shall be used the mount, in memory only not written to the disk. We distinguish devices by devt. Example: $ fallocate -l 300m ./disk1.img $ mkfs.btrfs -f ./disk1.img $ cp ./disk1.img ./disk2.img $ cp ./disk1.img ./disk3.img $ mount -o loop ./disk1.img /btrfs $ mount -o ./disk2.img /btrfs1 $ mount -o ./disk3.img /btrfs2 $ btrfs fi show -m Label: none uuid: 4a212b48-1bec-46a5-938a-783c8c1f0b02 Total devices 1 FS bytes used 144.00KiB devid 1 size 300.00MiB used 88.00MiB path /dev/loop0 Label: none uuid: adabf2fe-5515-4ad0-95b4-7b1609218c16 Total devices 1 FS bytes used 144.00KiB devid 1 size 300.00MiB used 88.00MiB path /dev/loop1 Label: none uuid: 1d77d0df-7d92-439e-adbd-20b9b86fdedb Total devices 1 FS bytes used 144.00KiB devid 1 size 300.00MiB used 88.00MiB path /dev/loop2 Co-developed-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
69d427f34c |
btrfs: add helper function find_fsid_by_disk
In preparation for adding support to mount multiple single-disk btrfs filesystems with the same FSID, wrap find_fsid() into find_fsid_by_disk(). Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
9ef17228e1 |
btrfs: stop reserving excessive space for block group item insertions
Space for block group item insertions, necessary after allocating a new block group, is reserved in the delayed refs block reserve. Currently we do this by incrementing the transaction handle's delayed_ref_updates counter and then calling btrfs_update_delayed_refs_rsv(), which will increase the size of the delayed refs block reserve by an amount that corresponds to the same amount we use for delayed refs, given by btrfs_calc_delayed_ref_bytes(). That is an excessive amount because it corresponds to the amount of space needed to insert one item in a btree (btrfs_calc_insert_metadata_size()) times 2 when the free space tree feature is enabled. All we need is an amount as given by btrfs_calc_insert_metadata_size(), since we only need to insert a block group item in the extent tree (or block group tree if this feature is enabled). By using btrfs_calc_insert_metadata_size() we will need to reserve 2 times less space when using the free space tree, putting less pressure on space reservation. So use helpers to reserve and release space for block group item insertions that use btrfs_calc_insert_metadata_size() for calculation of the space. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
f66e0209bd |
btrfs: stop reserving excessive space for block group item updates
Space for block group item updates, necessary after allocating or deallocating an extent from a block group, is reserved in the delayed refs block reserve. Currently we do this by incrementing the transaction handle's delayed_ref_updates counter and then calling btrfs_update_delayed_refs_rsv(), which will increase the size of the delayed refs block reserve by an amount that corresponds to the same amount we use for delayed refs, given by btrfs_calc_delayed_ref_bytes(). That is an excessive amount because it corresponds to the amount of space needed to insert one item in a btree (btrfs_calc_insert_metadata_size()) times 2 when the free space tree feature is enabled. All we need is an amount as given by btrfs_calc_metadata_size(), since we only need to update an existing block group item in the extent tree (or block group tree if this feature is enabled). By using btrfs_calc_metadata_size() we will need to reserve 4 times less space when using the free space tree and 2 times less space when not using it, putting less pressure on space reservation. So use helpers to reserve and release space for block group item updates that use btrfs_calc_metadata_size() for calculation of the space. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
398fb9131f |
btrfs: reorder btrfs_inode to fill gaps
Previous commit created a hole in struct btrfs_inode, we can move outstanding_extents there. This reduces size by 8 bytes from 1120 to 1112 on a release config. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
54c6537146 |
btrfs: open code btrfs_ordered_inode_tree in btrfs_inode
The structure btrfs_ordered_inode_tree is used only in one place, in btrfs_inode. The structure itself has a 4 byte hole which is wasted space. Move the btrfs_ordered_inode_tree members to btrfs_inode with a common prefix 'ordered_tree_' where the hole can be utilized and shrink inode size. Signed-off-by: David Sterba <dsterba@suse.com> |
||
Josef Bacik
|
cb6cbab790 |
btrfs: adjust overcommit logic when very close to full
A user reported some unpleasant behavior with very small file systems.
The reproducer is this
$ mkfs.btrfs -f -m single -b 8g /dev/vdb
$ mount /dev/vdb /mnt/test
$ dd if=/dev/zero of=/mnt/test/testfile bs=512M count=20
This will result in usage that looks like this
Overall:
Device size: 8.00GiB
Device allocated: 8.00GiB
Device unallocated: 1.00MiB
Device missing: 0.00B
Device slack: 2.00GiB
Used: 5.47GiB
Free (estimated): 2.52GiB (min: 2.52GiB)
Free (statfs, df): 0.00B
Data ratio: 1.00
Metadata ratio: 1.00
Global reserve: 5.50MiB (used: 0.00B)
Multiple profiles: no
Data,single: Size:7.99GiB, Used:5.46GiB (68.41%)
/dev/vdb 7.99GiB
Metadata,single: Size:8.00MiB, Used:5.77MiB (72.07%)
/dev/vdb 8.00MiB
System,single: Size:4.00MiB, Used:16.00KiB (0.39%)
/dev/vdb 4.00MiB
Unallocated:
/dev/vdb 1.00MiB
As you can see we've gotten ourselves quite full with metadata, with all
of the disk being allocated for data.
On smaller file systems there's not a lot of time before we get full, so
our overcommit behavior bites us here. Generally speaking data
reservations result in chunk allocations as we assume reservation ==
actual use for data. This means at any point we could end up with a
chunk allocation for data, and if we're very close to full we could do
this before we have a chance to figure out that we need another metadata
chunk.
Address this by adjusting the overcommit logic. Simply put we need to
take away 1 chunk from the available chunk space in case of a data
reservation. This will allow us to stop overcommitting before we
potentially lose this space to a data allocation. With this fix in
place we properly allocate a metadata chunk before we're completely
full, allowing for enough slack space in metadata.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Josef Bacik
|
6f2d3c0196 |
btrfs: increase ->free_chunk_space in btrfs_grow_device
My overcommit patch exposed a bug with btrfs/177 [1]. The problem here is
that when we grow the device we're not adding to ->free_chunk_space, so
subsequent allocations can cause ->free_chunk_space to wrap, which
causes problems in can_overcommit because we add this to ->total_bytes,
which causes the counter to wrap and gives us an unexpected ENOSPC.
Fix this by properly updating ->free_chunk_space with the new available
space in btrfs_grow_device.
[1] First version of the fix:
https://lore.kernel.org/linux-btrfs/b97e47ce0ce1d41d221878de7d6090b90aa7a597.1695065233.git.josef@toxicpanda.com/
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Josef Bacik
|
e9fd2c0523 |
btrfs: fix ->free_chunk_space math in btrfs_shrink_device
There are two bugs in how we adjust ->free_chunk_space in btrfs_shrink_device. First we're removing the entire diff between new_size and old_size from ->free_chunk_space. This only works if we're reducing the free area, which we could potentially not be. So adjust the math to only subtract the diff in the free space from ->free_chunk_space. Additionally in the error case we're unconditionally adding the diff back into ->free_chunk_space, which we need to only do if this device is writeable. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
efba145449 |
btrfs: make sure we cache next state in find_first_extent_bit()
Currently, at find_first_extent_bit(), when we are given a cached extent state that happens to have its end offset match the desired range start, we find the next extent state using that cached state, with next_state() calls, and then return it. We then try to cache that next state by calling cache_state_if_flags(), but that will not cache the state because we haven't reset *cached_state to NULL, so we end up with the cached_state unchanged, and if the caller is iterating over extent states in the io tree, its next call to find_first_extent_bit() will not use the current cached state as its end offset does not match the minimum start range offset, therefore the cached state is reset and we have to search the rbtree to find the next suitable extent state record. So fix this by resetting the cached state to NULL (and dropping our ref on it) when we have a suitable cached state and we found a next state by using next_state() starting from the cached state. This makes use cases of calling find_first_extent_bit() to go over all ranges in the io tree to do a single rbtree full search, only on the first call, and the next calls will just do next_state() (rb_next() wrapper) calls, which is more efficient. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
0f8ac74d41 |
btrfs: use extent_io_tree_release() to empty dirty log pages
When freeing a log tree, during a transaction commit, we clear its dirty log pages io tree by calling clear_extent_bits() using a range from 0 to (u64)-1. This will iterate the io tree's rbtree and call rb_erase() on each node before freeing it, which will often trigger rebalance operations on the rbtree. A better alternative it to use extent_io_tree_release(), which will not do deletions and trigger rebalances. So use extent_io_tree_release() instead of clear_extent_bits(). Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
63ffc1f7c4 |
btrfs: make tree iteration in extent_io_tree_release() more efficient
Currently extent_io_tree_release() is a loop that keeps getting the first node in the io tree, using rb_first() which is a loop that gets to the leftmost node of the rbtree, and then for each node it calls rb_erase(), which often requires rebalancing the rbtree. We can make this more efficient by using rbtree_postorder_for_each_entry_safe() to free each node without having to delete it from the rbtree and without looping to get the first node. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
df2a8e70c3 |
btrfs: collapse wait_on_state() to its caller wait_extent_bit()
The wait_on_state() function is very short and has a single caller, which is wait_extent_bit(), so remove the function and put its code into the caller. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
28967c7622 |
btrfs: remove redundant memory barrier from extent_io_tree_release()
The memory barrier at extent_io_tree_release() is redundant. Holding spin_lock here is not enough to drop the barrier completely. We only change the waitqueue of an extent state record while holding the tree lock - see wait_on_state(). The update to waitqueue state will not become stale because there will be an spin_unlock/spin_lock sequence between the change and waiting, this implies a full memory barrier. So remove the explicit smp_mb() barrier. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ reword reasoning ] Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
a1c20d15ee |
btrfs: make wait_extent_bit() static
The function wait_extent_bit() is not used outside extent-io-tree.c so make it static. Furthermore the function doesn't have the 'btrfs_' prefix. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
bea22a58c9 |
btrfs: update stale comment at extent_io_tree_release()
There's this comment at extent_io_tree_release() that mentions io btrees,
but this function is no longer used only for io btrees. Originally it was
added as a static function named clear_btree_io_tree() at transaction.c,
in commit
|
||
|
Filipe Manana
|
c91ea4bfa6 |
btrfs: make extent state merges more efficient during insertions
When inserting a new extent state record into an io tree that happens to
be mergeable, we currently do the following:
1) Insert the extent state record in the io tree's rbtree. This requires
going down the tree to find where to insert it, and during the
insertion we often need to balance the rbtree;
2) We then check if the previous node is mergeable, so we call rb_prev()
to find it, which requires some looping to find the previous node;
3) If the previous node is mergeable, we adjust our node to include the
range of the previous node and then delete the previous node from the
rbtree, which again may need to balance the rbtree;
4) Then we check if the next node is mergeable with the node we inserted,
so we call rb_next(), which requires some looping too. If the next node
is indeed mergeable, we expand the range of our node to include the
next node's range and then delete the next node from the rbtree, which
again may need to balance the tree.
So these are quite of lot of iterations and looping over the rbtree, and
some of the operations may need to rebalance the rb tree. This can be made
a bit more efficient by:
1) When iterating the rbtree, once we find a node that is mergeable with
the node we want to insert, we can just adjust that node's range with
the range of the node to insert - this avoids continuing iterating
over the tree and deleting a node from the rbtree;
2) If we expand the range of a mergeable node, then we find the next or
the previous node, depending on other we merged a range to the right or
to the left of the node we are currently at during the iteration. This
merging is as before, we find the next or previous node with rb_next()
or rb_prev() and if that other node is mergeable with the current one,
we adjust the range of the current node and remove the other node from
the rbtree;
3) Whenever we need to insert the new extent state record it's because
we don't have any extent state record in the rbtree which can be
merged, so we can remove the call to merge_state() after the insertion,
saving rb_next() and rb_prev() calls, which require some looping.
So update the insertion function insert_state() to have this behaviour.
Running dbench for 120 seconds and capturing the execution times of
set_extent_bit() at pin_down_extent(), resulted in the following data
(time values are in nanoseconds):
Before this change:
Count: 2278299
Range: 0.000 - 4003728.000; Mean: 713.436; Median: 612.000; Stddev: 3606.952
Percentiles: 90th: 1187.000; 95th: 1350.000; 99th: 1724.000
0.000 - 7.534: 5 |
7.534 - 35.418: 36 |
35.418 - 154.403: 273 |
154.403 - 662.138: 1244016 #####################################################
662.138 - 2828.745: 1031335 ############################################
2828.745 - 12074.102: 1395 |
12074.102 - 51525.930: 806 |
51525.930 - 219874.955: 162 |
219874.955 - 938254.688: 22 |
938254.688 - 4003728.000: 3 |
After this change:
Count: 2275862
Range: 0.000 - 1605175.000; Mean: 678.903; Median: 590.000; Stddev: 2149.785
Percentiles: 90th: 1105.000; 95th: 1245.000; 99th: 1590.000
0.000 - 10.219: 10 |
10.219 - 40.957: 36 |
40.957 - 155.907: 262 |
155.907 - 585.789: 1127214 ####################################################
585.789 - 2193.431: 1145134 #####################################################
2193.431 - 8205.578: 1648 |
8205.578 - 30689.378: 1039 |
30689.378 - 114772.699: 362 |
114772.699 - 429221.537: 52 |
429221.537 - 1605175.000: 10 |
Maximum duration (range), average duration, percentiles and standard
deviation are all better.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
David Sterba
|
893fe24399 |
btrfs: change test_range_bit to scan the whole range
The semantics of test_range_bit() with filled == 0 is now in it's own helper so test_range_bit will check the whole range unconditionally. The detection logic is flipped and assumes success by default and catches exceptions. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
David Sterba
|
99be1a66e1 |
btrfs: add specific helper for range bit test exists
The existing helper test_range_bit works in two ways, checks if the whole range contains all the bits, or stop on the first occurrence. By adding a specific helper for the latter case, the inner loop can be simplified and contains fewer conditionals, making it a bit faster. There's no caller that uses the cached state pointer so this reduces the argument count further. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
6422b4cd95 |
btrfs: move btrfs_realloc_node() from ctree.c into defrag.c
btrfs_realloc_node() is only used by the defrag code. Nowadays we have a defrag.c file, so move it, and its helper close_blocks(), into defrag.c. During the move also do a few minor cosmetic changes: 1) Change the return value of close_blocks() from int to bool; 2) Use SZ_32K instead of 32768 at close_blocks(); 3) Make some variables const in btrfs_realloc_node(), 'blocksize' and 'end_slot'; 4) Get rid of 'parent_nritems' variable, in both places where it was used it could be replaced by calling btrfs_header_nritems(parent); 5) Change the type of a couple variables from int to bool; 6) Rename variable 'err' to 'ret', as that's the most common name we use to track the return value of a function; 7) Move some variables from the top scope to the scope of the for loop where they are used. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
79d25df0d7 |
btrfs: export comp_keys() from ctree.c as btrfs_comp_keys()
Export comp_keys() out of ctree.c, as btrfs_comp_keys(), so that in a later patch we can move out defrag specific code from ctree.c into defrag.c. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
95f93bc4cb |
btrfs: rename and export __btrfs_cow_block()
Rename and export __btrfs_cow_block() as btrfs_force_cow_block(). This is to allow to move defrag specific code out of ctree.c and into defrag.c in one of the next patches. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
b8bf4e4d6a |
btrfs: use round_down() to align block offset at btrfs_cow_block()
At btrfs_cow_block() we can use round_down() to align the extent buffer's logical offset to the start offset of a metadata block group, instead of the less easy to read set of bitwise operations (two plus one subtraction). So replace the bitwise operations with a round_down() call. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
7bff16e3ff |
btrfs: remove noinline attribute from btrfs_cow_block()
It's pointless to have the noiline attribute for btrfs_cow_block(), as the function is exported and widely used. So remove it. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Anand Jain
|
5966930dfd |
btrfs: remove incomplete metadata_uuid conversion fixup logic
Previous commit ("btrfs: reject devices with CHANGING_FSID_V2") has
stopped the assembly of devices with the CHANGING_FSID_V2 flag in the
kernel. Such devices can be scanned but will not be registered and can't
be mounted without a manual fix by btrfstune. Remove the related logic
and now unused code.
The original motivation was to allow an interrupted partial conversion
fix itself on next mount, in case the system has to be rebooted. This is
a convenience but brings a lot of complexity the device scanning and
handling the partial states. It's hard to estimate if this was ever
needed in practice, expecting the typical use case like a manual
conversion of an unmounted filesystem where the user can verify the
success and rerun it eventually.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add historical context ]
Signed-off-by: David Sterba <dsterba@suse.com>
|